Database Info

[Q] Update from 3.1 & Tiamat 1.4.4 failed

Help for a newbie.
I followed this procedure:
1 - Copied file to sd card and renamed to update.zip (in a windows computer)
2 - turned xoom on and wento to rom manager
3 - wiped user and dalvik cache
4 - Tried to load file from zip, but it was not possible to find the update .zip file.
I get the following message:
E: Can't open /sdcard/update.zip
(bad)
Tried also without renaming and got:
E: Can't open /sdcard/update_US-Xoom-Wifi-3.2_HTJ85B-from HMJ37_stachre-solarnz-boot-img_v05.zip
After many trials rebooted.
System info showed the same 3.1 and Tiamamat 1.4.4
Opened rom manager again.
seleced install rom from sdcard
System backed up info and rebooted.
Had to reload all apps from store.
System info shows I am running 3.1 and Tiamat 1.4.4.
Also I keep receiving a message that there is a system update available.
I can't understand what I did wrong.
I g
Can anyone help?
Thank you

rogerodd said:
Help for a newbie.
I followed this procedure:
1 - Copied file to sd card and renamed to update.zip (in a windows computer)
2 - turned xoom on and wento to rom manager
3 - wiped user and dalvik cache
4 - Tried to load file from zip, but it was not possible to find the update .zip file.
I get the following message:
E: Can't open /sdcard/update.zip
(bad)
Tried also without renaming and got:
E: Can't open /sdcard/update_US-Xoom-Wifi-3.2_HTJ85B-from HMJ37_stachre-solarnz-boot-img_v05.zip
After many trials rebooted.
System info showed the same 3.1 and Tiamamat 1.4.4
Opened rom manager again.
seleced install rom from sdcard
System backed up info and rebooted.
Had to reload all apps from store.
System info shows I am running 3.1 and Tiamat 1.4.4.
Also I keep receiving a message that there is a system update available.
I can't understand what I did wrong.
I g
Can anyone help?
Thank you
Click to expand...
Click to collapse
You may have the wrong version of CWM recovery installed. You need Tiamat v3.2.0.0 R4c. If you are trying to flash thru Rom manager it may have had you update to v4.0.0.4 which is not compatible with the external sdcard. If this is the case, re-install the correct recovery version, and then redo your backup so that it is on the external sdcard where it can be safe if you need to wipe/factory reset. You can use Rom manger just to reboot into recovery, or df Quick Boot from the market and use that instead.
Good luck!

okantomi said:
You may have the wrong version of CWM recovery installed. You need Tiamat v3.2.0.0 R4c. If you are trying to flash thru Rom manager it may have had you update to v4.0.0.4 which is not compatible with the external sdcard. If this is the case, re-install the correct recovery version, and then redo your backup so that it is on the external sdcard where it can be safe if you need to wipe/factory reset. You can use Rom manger just to reboot into recovery, or df Quick Boot from the market and use that instead.
Good luck!
Click to expand...
Click to collapse
Rom manager says it is 4.0.0.4 but when in recovery is say CWM recovery-Tiamat-R4c-100611-1150-cwm or Tiamat v3.2.0.0 R4c ( I don't remember exectly) and the error is the same.
Also, I tried reflash recovery-Tiamat-R4c-100611-1150-cwm.zip from the SD card and get an error.
I really don't have a clue of what to do.
Any help would be welcome.

rogerodd said:
Rom manager says it is 4.0.0.4 but when in recovery is say CWM recovery-Tiamat-R4c-100611-1150-cwm or Tiamat v3.2.0.0 R4c ( I don't remember exectly) and the error is the same.
Also, I tried reflash recovery-Tiamat-R4c-100611-1150-cwm.zip from the SD card and get an error.
I really don't have a clue of what to do.
Any help would be welcome.
Click to expand...
Click to collapse
The problem is that you can't flash anything from the external sdcard with v4.0.0.4. In rom manager, see if you can find"all clockwork recoveries" and find 3.2.0.0. If not, find 3.0.2.8 or 3.0.2.5 and flash one of them, preferably the latest of those I have listed. I think those will at least recognize your sdcard. If you can't do that, you will need to reflash the correct recovery the same way you did when you rooted. Remember, never flash a zip file through adb.
Good luck!

I tried to flash recovery-Tiamat-R4c-100611-1150-cwm.img via adb.
I could flash boot sector. Then I reboot into recovery and try to apply zip from card with file update_US-Xoom-WiFi-3.2-HTJ85B-from-HMJ37_stachre_solarnz-boot-img_v05.zip, but there is a NO at the end of the name of the file and I can't go on.
Trying to rename as update.zip and run apply zip from card results in same error:
E: Can't open /sdcard/update.zip
(bad)
what should I do?
Thank you

possible bad download... download again... also, don't think this would be an update... leave it as originally named, just choose the option to choose which zip file to install from the sd card

rogerodd said:
I tried to flash recovery-Tiamat-R4c-100611-1150-cwm.img via adb.
I could flash boot sector. Then I reboot into recovery and try to apply zip from card with file update_US-Xoom-WiFi-3.2-HTJ85B-from-HMJ37_stachre_solarnz-boot-img_v05.zip, but there is a NO at the end of the name of the file and I can't go on.
Trying to rename as update.zip and run apply zip from card results in same error:
E: Can't open /sdcard/update.zip
(bad)
what should I do?
Thank you
Click to expand...
Click to collapse
It sounds like you are flashing recovery ok, but you keep overwriting it with the stock recovery.
Here is some important information that should help a lot with making your new recovery "stick"and this was taken from the Idiot's guide to flashing...in the Development section, and originally written by publicanimal:
4. Install recovery image (CWM)
Download the recovery image file and save it to your computer
Boot into flash mode with 'adb reboot bootloader'
Install your downloaded recovery image
C:\Documents and Settings\Anders> fastboot flash recovery recovery-Tiamat-R4c-100611-1150-cwm.img
Restart the device with 'fastboot reboot'. Timing is essential here, so be alert when the device restarts, or you will have to redo this section
Enter CWM with the following procedure
Once the Motorola logotype is shown, start counting to 3. At 3, press the Volume Down button. This should result in the text 'Android Recovery' in the top left corner. If it does not work, experiment with the timing ...
When 'Android Recovery' is shown press the Volume Up button. This should invoke the CWM recovery menu. If that works, then congratulations for reaching this far .
Here is a potential pitfall. If you are unable to enter CWM *before* the device boots into Honeycomb, then the newly installed recovery image will be overwritten by the system default recovery. If that happens, or if you see "starting fastboot protocol " your timing wasn't right and you need to reflash the recovery image and try it again.
See original post,below for more information.
http://forum.xda-developers.com/showthread.php?t=1130996

Installing 3.1 OTA update with custom recovery

Ran into this issue as I'm running a custom recovery and couldn't flash the update. Took the time to figure out how to do this properly as I couldn't find any existing set of instructions and I'm sure some people will want them.
WARNING: Flashing this update WILL reset root and the recovery partition. These steps restore both. Restoring custom recovery will require a PC with ADB installed as I was only able to find the raw .img file and not a flashable .zip.
1). Download full update zip by navigating to Settings > About tablet > System updates > Check full update (http://i.imgur.com/ozGBzKZ.png)
2). After update is finished downloading, navigate to /data/data/com.nvidia.ota/files/ROM (I used Root Explorer) and move the downloaded update to either your internal or external storage card. DO NOT TAP THE NOTIFICATION THAT SAYS TAP HERE TO INSTALL UPDATE!
3). Download flashable SuperSU.zip from http://download.chainfire.eu/supersu
4). Download CWM recovery.img from http://forum.xda-developers.com/shi.../recovery-cwm-recovery-nvidia-shield-t2848064
5). Reboot recovery
6). Make a nandroid backup in recovery first before doing anything
7). Flash full update archive (DO NOT REBOOT AFTERWARDS)
8). Flash SuperSU archive (this will restore root)
9). Follow instructions at http://forum.xda-developers.com/shield-tablet/development/root-root-lollipop-t2945044 to use dd to restore custom recovery through adb shell.
10). Wipe cache/dalvik
11). Reboot!
In the off chance that you screw something up and need to force your tablet back into recovery mode manually, the button combo is Power + Volume Down. Also, I was able to dirty flash (not wipe data first) and everything seems to be working fine. As far as the update goes, audio/wifi is working without issue and if anything, the tablet seems more responsive (doesn't slow down/lock up as much). I literally pounded out these instructions after getting my tablet updated so I haven't had a chance to mess around with it much yet.

OTA update bootloop fix [S-ON] [BU] [Stock Rooted ROM]

Hi, I found a way to fix this bootloop which happens after you flash the latest ota update if you have unlocked and rooted your stock rom.
I own a HTC E8 China Unicom [M8Sw - dual sim], but I think it will work on other variants.
It is the SU binary/files which are preventing the phone from updating correctly.
You can also restore a clean unrooted TWRP backup and do the OTA update.. it will work just fine.
This tutorial is for those who don't want to lose their app data and modifications.
To be able to update... you need to fully unroot the phone before. Well, this was previously not possible due to system write protection.
(There are also other methods of unrooting. (deleting the SU files manually with the file manager of TWRP recovery) This doesn't work, I have tried it myself..often cause bootloops.)
But now we have a custom recovery mod which enables us to write to the system partition and thus can fully unroot with SuperSU app itself.
Requirements:
-some expertise with adb/flashing/twrp recovery management will be needed.
-stock firmware.zip, inside the OTA zip file, where you will find you stock recovery,boot image, etc
-Stock ROM, rooted with no modified existing system files
-TWRP Recovery from @Captain_Throwback works fine. I used the 2.8.6.0 one. http://forum.xda-developers.com/one-e8/orig-development/recovery-twrp-touch-recovery-t3060188
-untouched Stock Kernel Modules (IMPORTANT)
-SchKernel Extra 3.3, to gain write permission to /system http://forum.xda-developers.com/one-e8/general/schkernel-extra-3-3-t3200090
[UPDATE: SchKernel Extra has been updated to 3.5 and the old one is not available for download on the other thread. You can find attached at the bottom of this section ver3.3 which I had used. Please don't use ver3.5 as a user has reported having bootloop with that.)
-Battery +80 charge recommended...the process gonna demand a lot of power.
-Patience... loads of it....
Disclaimer: I am not responsible if you brick or damage you phone!!
Before you flash anything, be sure to have a working twrp full backup of you phone! In case anything goes wrong.
STEPS:
1. Copy the untouched kernel 'modules' folder [found in system/lib/ in your phone] to another location ( for e.g. to your internal phone memory), you're gonna need it later.
2. Flash the twrp recovery if you haven't already and boot into TWRP recovery.
3. flash SchKernel Extra 3.3 kernel mod. It will launch the aroma installer. There will be options as overclocking/underclocking etc..
I left everything on STOCK option, disabled Swipe2sleep, unselected the everything in the optional addition page. Then went to install it.
4. Reboot, and open SuperSU app, go into setting, tap the FULL UNROOT option, this might take a while. The first time, when the unrooting notice shows and it seems that the app is not doing anything, you might be required to exit the app by pressing home button. Then open the app again and redo FULL UNROOT option. If you exit the app and when re-opening it, the "unrooting notice" is still there, then it means it is working. This might take a bit of trial and error.
5. Ultimately, SuperSU app will close. Then you will need to reboot. You will see that SuperSU is gone and that you have no root access.
6. Now, turn it off again to go to fastboot. Connect to PC and flash the stock boot.img via adb to restore the stock kernel.
8. Then, in twrp recovery, mount /system partition and got to advanced >> file manager..
9. Now browse to /system/lib/ and delete the 'modules folder'.
This is because the SchKernel Extra 3.3 kernel mod flashed previously has modified your kernel modules and when you will try to update the OTA, the stock recovery will report that the kernel modules (xxxxx.ko) has be modified and it will stop the OTA update process.
10. Remember the previous untouched stock 'modules' folder you copied previously, now move it to /system/lib/HERE , to replace the deleted folder.
[DO STEP 9 BEFORE - Don't try to overwrite the folder, it won't be possible. It said operation failed for me. ]
Optional: You might also want to delete su.d folder in \system and init.d folder in system\etc
these files were for the custom kernel and won't be needed anymore.
11. Reboot into fastboot mode, connect to PC (if not already), flash stock recovery.
12. Now, you're good to flash the OTA updates. :good:
-Download it, if not already done.
If ever you have downloaded from PC and copied it to phone, and for whatever reason the phone is not detecting the zip file and asking for install.
Just move it to you exeternal SD card and rename it to "ptt.zip" , go into stock recovery and go down the list to "apply update from SD card"
and it should flash the zip file. When done, select the reboot option and it will say reboot to flash firmware.zip and the will boot. :fingers-crossed:
When booting it will take some time (3 to 8 mins), and then go to the "Android is updating - optimizing apps" screen. This might take a lot of time if you have a lot of apps installed. The phone might get really hot during this process.
When the OS finally boot completely there will be an "HTC" screen and an exclamatin mark in the notification bar. NO WORRIES, it is the just the update working. It will go away when the update is fully processed.
After OTA update is done, you can make a twrp backup of the unrooted system, so that you can restore it for future OTA updates.
If some steps are confusing, feel free to ask for any clarification
Hope I helped you. Don't forget to hit thanks

problem
hi after i flashed SchKernel Extra 3.3 my phone just turned off and won't turn on. what should i do?

neekless said:
hi after i flashed SchKernel Extra 3.3 my phone just turned off and won't turn on. what should i do?
Click to expand...
Click to collapse
how did you flash it exactly?
Did you flash it thought TWRP recovery?
also...what variant of HTC e8 are you using?

Thank you for this guide. :good:
For the newbies, here are exact instructions for each step. TWRP is required; presumably you have this because you've rooted your phone. (If you haven't rooted your phone, what are you doing here?)
Note that rebooting to TWRP can be accomplished in several ways:
Long-press the power button; when prompted choose Reboot. When the screen goes black, press and hold the Volume Down key. This will take you to hboot; from there choose Recovery.
Enable developer mode from settings, plug in to a computer, and issue the command adb reboot recovery.
Also note that it is prudent to do a full TWRP backup to external storage (microSD, USB OTG) before anything else, so you have a good recovery point if things go wrong.
To copy the system/lib/modules directory, you can use a root-enabled file explorer or TWRP. To do it in TWRP:
Reboot to TWRP.
In TWRP, select Mount. Make sure that system is checked.
Back to the main TWRP menu, select Advanced.
In the advanced menu, select File Manager. Then navigate to /system/lib/modules.
Tap on Select, then Copy Folder. Navigate to a new location - I used /sdcard/Backup - and tap Select again. Don't use your external SD or USB-OTG, they may not preserve permissions correctly.
To flash the SchKernel Extra, copy the ZIP file to your device, reboot into TWRP, and select Install. From there, navigate to where you copied the ZIP file and select it; then follow the prompts as sanijsnj specified.
Removing SuperSU works exactly as described. Don't forget to reboot at the end (although it may not be necessary).
To flash the stock boot, in a cmd window where you have the Android SDK, typically in the sub-folder platform-tools enter: fastboot flash boot boot.img (boot.img from the OTA ZIP).
To delete and restore /system/lib/modules, follow the steps above, starting of course from your saved 'modules' directory and copying to /system/lib.
To flash the stock recovery, again in the cmd window enter: fastboot flash recovery recovery.img (recovery.img from the OTA ZIP).

Update your MIUI v7 Rom in your not supported Note 3 !

ALWAYS MAKE A BACKUP, IM NOT RESPONSIBLE FOR ANYTHING THAT HAPPENS TO YOUR DEVICE OR ANY DATA LOSS
So if your having trouble updating your MIUI v7 Rom with the updater app that shows you the weekly updates that camed, or etc. When you go to recovery and flash the update zip it will give an error 7...
You came to the right thread
First make a backup if anything goes wrong please.
1- Download the weekly update from here or the updater app. (if it shows on updater app an update size 1GB or so download the one here, its supposed to be 2mb or less)
i will update weekly when the new update comes
if you chosed to use the update from the thread dont edit the update script just jump to the recovery steps
2- Now extract the zip.
3- Go to where you extracted the folder.
4- Go to META_INF/google/android/
5- open update-script in text editor
6- Delete from top to bottom until you see something like this "ui_print("verifying current system") is like after the fisrt 10 lines of code
7- Now save the update-script and re zip the folder
Recovery Steps:
8- Now reboot into recovery and wipe dalvik and cache
9- Go to mount and make sure both system and data are checked
10- Now below that make sure the mount system as read-only is NOT checked
11- Flash the update zip you edited and reboot.
12- Enjoy!

HELP: Paranoid Android 7.3.1 TWRP .zip Install Fail

Hello!
I'm trying to flash my Google Pixel with the latest Paranoid Android 7.3.1. I downloaded the Sailfish Paranoid Android .zip file along with my correct Open GApps .zip file. I already have TWRP installed on my device.
When I try to install The two zip files in TWRP, I get an error. It will not install Paranoid. It says something like "Looking for [a file inside of the zip file]" then "skipped [this file]" and finally "cannot install file [Paranoid file path]".
I'm completely lost on what this means and how to fix it. Does anyone have any advice?
Thanks!

I had the same error message but didn't know what the cause was or how to fix it so I reverted back to stock rom.