Database Info

[GUIDE][ROOT+CWM]Samsung Galaxy Ace Plus GT-S7500L

Note:This is only for S7500L
This should work on any S7500L
Recovery Mode: volume up+ volume down + home + power
Download Mode: volume down + home + power
First download Odin
Put phone into download mode and connect to the PC
Flash the recovery.tar package as PDA and wait for phone to reboot
Put phone into download mode and connect to the PC Again
Flash the boot.tar package as PDA and wait for phone to reboot
Download and extract the final.zip package on your PC
Boot in CWM recovery and connect phone to PC
Run runme.bat on PC while phone is in recovery mode
Reboot the phone after process is over.
Obs: If you have problem with sound flash this ROM and repeat the root process.
Obs 2: You get the yellow triangle
My Credits goes to:
DOOMLORD
Chainfire
and all others Devs.

In the last step, I can't go to CWM Recovery (Phone Off, Vol Up+OK+Power) and into Android I lost sound. I have firmware TTT. Any idea ?
Thanks

hunterve said:
In the last step, I can't go to CWM Recovery (Phone Off, Vol Up+OK+Power) and into Android I lost sound. I have firmware TTT. Any idea ?
Thanks
Click to expand...
Click to collapse
Use this rom http://www.hotfile.com/dl/155738327/60846d8/S7500LVJLD2_S7500LZTOLD2_ZTO.zip.html
After that make root again.

hunterve said:
In the last step, I can't go to CWM Recovery (Phone Off, Vol Up+OK+Power) and into Android I lost sound. I have firmware TTT. Any idea ?
Thanks
Click to expand...
Click to collapse
Recovery is Vol up + Vol Down + Home + Power
Pay attention.
Edit:is difficult to do
but it works

I have tried that like a million times but all my phone is do in the last step while i press the up+down+power is keep vibrating like it is ringing
can you explain how to press te buttons or my issue is other?
edit:
sorry, my bad, it´s really so hard to press all of these
almost 2 hours trying

danilow_16 said:
I have tried that like a million times but all my phone is do in the last step while i press the up+down+power is keep vibrating like it is ringing
can you explain how to press te buttons or my issue is other?
edit:
sorry, my bad, it´s really so hard to press all of these
almost 2 hours trying
Click to expand...
Click to collapse
Please reply if works for you.
Thanks

I have a S7500L.
Have anyone successfully used this method?.

jvalecillos said:
I have a S7500L.
Have anyone successfully used this method?.
Click to expand...
Click to collapse
I have tested on 6 S7500L
All Successful.
If works for you, please reply

It worked !,
have u tried this custom kernel after rooting ur phone?
http://forum.xda-developers.com/showthread.php?t=1674667

comrex said:
It worked !,
have u tried this custom kernel after rooting ur phone?
http://forum.xda-developers.com/showthread.php?t=1674667
Click to expand...
Click to collapse
I dont have de S7500L.
I made this root for a friend.
And the link you have post is only for S7500,not for L model.

Hello,
I just rooted my S7500L, Chilean version, without any problems!
Muito obrigado Andersondj!

Corsario_Negro said:
Hello,
I just rooted my S7500L, Chilean version, without any problems!
Muito obrigado Andersondj!
Click to expand...
Click to collapse
Thanks for the reply.
De nada.

Corsario_Negro said:
Hello,
I just rooted my S7500L, Chilean version, without any problems!
Click to expand...
Click to collapse
What about the sound flash issue?, Did you had any problems?.
My phone was bought in Miami, but is S7500L, in fact on the back where is the battery, the information is in spanish.
In Settings I can see this:
Android version: 2.3.6
Baseband version: S7500LVJLB1
Kernel version: 2.6.38.6 [email protected]#1
Build Number: GINGERBREAD.VJLB1
Baseband information and this post suggest that it have Trinidad and Tobago firmware or something like that.
Andersondj said:
I dont have de S7500L.
I made this root for a friend.
And the link you have post is only for S7500,not for L model.
Click to expand...
Click to collapse
Anderson, Where did you get the rom from which the patch was made?, What version was?
Thanks in advance.
EDIT: Now I see, I found your postings on http://brasildroid.com.br. Did you use the Brazilian rom, didn't you?

Brazilian ROM
Link on the first post.
Enviado de meu GT-I5500 usando o Tapatalk 2

jvalecillos said:
EDIT: Now I see, I found your postings on http://brasildroid.com.br. Did you use the Brazilian rom, didn't you?
Click to expand...
Click to collapse
Yes,Braziliam Rom

jvalecillos said:
What about the sound flash issue?, Did you had any problems?.
Click to expand...
Click to collapse
No sound problems, nothing. Apart from the yellow triangle, but it doesn't do anything and it's barely visible.
The only bad thing (my fault though) is that I deleted Gallery3D.apk and TwWallpaperChooser.apk and now I can't change the lock screen wallpaper. I use QuickPic for photos and it doesnt have the lock screen option, only contact photo and phone wallpaper.

Corsario_Negro said:
No sound problems, nothing. Apart from the yellow triangle, but it doesn't do anything and it's barely visible.
The only bad thing (my fault though) is that I deleted Gallery3D.apk and TwWallpaperChooser.apk and now I can't change the lock screen wallpaper. I use QuickPic for photos and it doesnt have the lock screen option, only contact photo and phone wallpaper.
Click to expand...
Click to collapse
Here.
Gallery and TwWallpaperChooser.
http://www.mediafire.com/?a5fzje7hzfq05v3

Andersondj said:
Here.
Gallery and TwWallpaperChooser.
http://www.mediafire.com/?a5fzje7hzfq05v3
Click to expand...
Click to collapse
Oh thank you but I already have the apps (I did a backup of system/app with ADB).
I think I will start using a different lock screen like 91 Locker, that has a ton of options including background change.

How can i Install the ROM
I havent tried yet, becouse i want to be sure bout everything
How do you install the ROM that you posted in case you have problems?
And how can I Upgrade to 4.0 ICS or something like this?
sorry bout my noobness

eduardoazul_23 said:
I havent tried yet, becouse i want to be sure bout everything
How do you install the ROM that you posted in case you have problems?
And how can I Upgrade to 4.0 ICS or something like this?
sorry bout my noobness
Click to expand...
Click to collapse
Odin=PDA
There's no 4.0 for ace plus.
Enviado de meu GT-N7000 usando o Tapatalk 2

[Q] Flashing firmwares from other regions in GT-N8000

Hi!
I have a Brazilian Galaxy Note 10.1 (firmware code: ZVV) and I want to install a ROM that I found in sammobilie that has some improvements.
However this ROM is designed for Chile (firmware code: CHO).
The both firmwares seems to be designed to the same region:
My firmware: N8000UBALGA
Firmware that I want to flash: N8000UBALI3
The difference is the CSC.
I have two questions:
1) Is it "safe" to flash this ROM using Odin?
2) How can I know if the new firmware will have support for Brazilian Portuguese?
Thanks,
Ronan

Ronis_BR said:
Hi!
I have a Brazilian Galaxy Note 10.1 (firmware code: ZVV) and I want to install a ROM that I found in sammobilie that has some improvements.
However this ROM is designed for Chile (firmware code: CHO).
The both firmwares seems to be designed to the same region:
My firmware: N8000UBALGA
Firmware that I want to flash: N8000UBALI3
The difference is the CSC.
I have two questions:
1) Is it "safe" to flash this ROM using Odin?
2) How can I know if the new firmware will have support for Brazilian Portuguese?
Thanks,
Ronan
Click to expand...
Click to collapse
Personally I prefere europian roms (first to get recent updates and have some good samsung apps not avaliable on other countries ) so you can download the Rom from Portugal and flash via Odin , it is safe and you won't lose your waranty. And about Chile , if its native language is Portuguese then its Rom will support portuguees for sure .
Sent from my GT-N8000 using xda app-developers app

hoss_n2 said:
Personally I prefere europian roms (first to get recent updates and have some good samsung apps not avaliable on other countries ) so you can download the Rom from Portugal and flash via Odin , it is safe and you won't lose your waranty. And about Chile , if its native language is Portuguese then its Rom will support portuguees for sure .
Sent from my GT-N8000 using xda app-developers app
Click to expand...
Click to collapse
The language in Chile is not Portuguese, also Portuguese from Portugal is quite different from Brazilian Portuguese.
However in my Brazilian ROM, I have option to select almost all languages in System configurations.
I'm just wondering if the ROM from Chile will also have this option...

So best idea is to go back to sammobile, find your stock rom and have that as a backup in case you decide you need to go back.
The only way you'll know for sure is to try it...

ultramag69 said:
So best idea is to go back to sammobile, find your stock rom and have that as a backup in case you decide you need to go back.
The only way you'll know for sure is to try it...
Click to expand...
Click to collapse
Ok, but it won't brick my device right
Also, I'm not sure what options do I need to set in Odin.
I saw some sites saying to do not mark Repartition. Is it right?
Thanks,
Ronan

Ok, I have flashed the firmware from Chile (CHO) without any problems.
It was almost the same... I only saw one difference: in S Note, you have a scroll bar.
Thus, I flashed my original ROM again (Vivo ROM, ZVV).
Afterwards I had a little problem with Kies. The installed ROM is really ZVV (I checked with *#1234#), but Kies was showing that I had a CHO ROM and that an uptade through Kies is not possible. I tried everything, factory reset, cache wipe, reflash the ZVV ROM, but nothing fixed the problem. Then I realized that the problem was not with my Galaxy Note, but with Kies itself. I uninstalled it and used a register cleanner to remove all entries related to Kies. Then I installed Kies again and the problem was finally fixed!! I think that Kies stored my device information with CHO ROM and did not uptade CSC when I plugged it with the ZVV ROM.
Thanks,
Ronan
Sent from my GT-N8000 using xda premium

Cool, glad everything went well.
Rule of thumb for ODIN, everything is set up when you start ODIN. All you need to do is add the files you wish to flash. Don't change any other settings and,generally, all will be well... There's always a chance of a bad flash but most times it's user error rather than anything else. It can also be a ba download of the flash file. If you have an MD5 checksum for the update, use an MD5 checker app to ensure the flash file isn't corrupted. This will lessen the chance of a failed flash...
Cheers mate...

ultramag69 said:
Cool, glad everything went well.
Rule of thumb for ODIN, everything is set up when you start ODIN. All you need to do is add the files you wish to flash. Don't change any other settings and,generally, all will be well... There's always a chance of a bad flash but most times it's user error rather than anything else. It can also be a ba download of the flash file. If you have an MD5 checksum for the update, use an MD5 checker app to ensure the flash file isn't corrupted. This will lessen the chance of a failed flash...
Cheers mate...
Click to expand...
Click to collapse
if I flash a ROM from another country, will I lose apps and settings?
PS: I anot rooted, so I cannot make backups with titanium

Depends on the update... I'v had updates that wipe ALL data then I've had others where the data is still there... I tend to find its a roll of the dice every time. This is why I root my device....
I updated one just recently, the Oz rom, and it left all data intact however it is better to clear all data otherwise you might have a problem with the new rom and old data causing issues...

My firmware: N8000ZCCMD2 4.1.2
Firmware that I want to flash:Android 4.1.2 XXCMA2 Firmware Details: is that suitable pls help

Flash a different carrier's KitKat 4.4.2 on N8000
Hi! My tablet (N8000) has the 4.1.2 version, and I don't think any KitKat update will come soon, because the device code is SEK (Ukraine / Kyivstar) and you know the situation there.
Therefore I decided to upgrade via Odin to the 4.4.2 official version from Poland, at least. Or any other country that already has the update.
Will I encounter any problems if flashing the ROM from another country? I know the answer is pretty straight forward that everything should be fine, but still, better ask.
Thank you!

Help me! Galaxy s i9003 stuck or bricked!!

Please help !
Update media please wait
E:Con t mount /dev/block/mmcblkop1
( No such file or directory )
E: copy_dbdata_media : Can t mount SDCARD :
your storage not prepard yet.please use Ui me
nu for format and reboot actions .
copy default media content failed..
i flash cm10.1 and is failed
View attachment 1821265

0988846477 said:
Please help !
Update media please wait
E:Con t mount /dev/block/mmcblkop1
( No such file or directory )
E: copy_dbdata_media : Can t mount SDCARD :
your storage not prepard yet.please use Ui me
nu for format and reboot actions .
copy default media content failed..
i flash cm10.1 and is failed
View attachment 1821265
Click to expand...
Click to collapse
I dont understand man... after it is said like 10000 times on forum and still you ignore the fact you cannot flash via samsung stock recovery... you need a custom recovery like CWM to flash a custom ROM..
anyways lets just bring you phone back...
*Download ODIN http://dl.xda-developers.com/attachd...din3-v1.85.zip
*Also download any gingerbread stock ROM (http://hotfile.com/dl/145857619/8242...Q_SER.zip.html
Pass: sampro.pl)
*Install Samsung USB drivers.
*Put your phone into download mode by pressing Volume down+Home+Power key...
*Open ODIN and select the downloaded stock ROM (PDA only)
*Now connect your phone to pc via usb cable (you should see a com port turned yellow in ODIN which means your phone is detected by ODIN).
*Click start and wait till it says it PASSED
*Reboot your phone.
*Find the proper instruction to root your phone and how to flash a custom recovery.Then install a Custom ROM of your choice(read the authors installing instructions first and proceed)

I think he not flashing zip.
He have corrupted mmc chip.
Sent from my GT-I9003 using Tapatalk 2

mustafahussain said:
*Download ODIN http://dl.xda-developers.com/attachd...din3-v1.85.zip
*Also download any gingerbread stock ROM (http://hotfile.com/dl/145857619/8242...Q_SER.zip.html
Click to expand...
Click to collapse
Hi
I'm trying to restore my phone because it doesn't start any more after latest update of CM 10.1 (nor normal boot nor recovery mode) so I want to try to reinstall stock rom, but your links are broken can you post the correct ones? thank you
EDIT
Found links by myself
Can I try the procedure, anyway?

Flashing and change android version 2.2.1 Froyo to android 2.3.6 GB
mustafahussain said:
I dont understand man... after it is said like 10000 times on forum and still you ignore the fact you cannot flash via samsung stock recovery... you need a custom recovery like CWM to flash a custom ROM..
anyways lets just bring you phone back...
*Download ODIN http://dl.xda-developers.com/attachd...din3-v1.85.zip
*Also download any gingerbread stock ROM (http://hotfile.com/dl/145857619/8242...Q_SER.zip.html
Pass: sampro.pl)
*Install Samsung USB drivers.
*Put your phone into download mode by pressing Volume down+Home+Power key...
*Open ODIN and select the downloaded stock ROM (PDA only)
*Now connect your phone to pc via usb cable (you should see a com port turned yellow in ODIN which means your phone is detected by ODIN).
*Click start and wait till it says it PASSED
*Reboot your phone.
*Find the proper instruction to root your phone and how to flash a custom recovery.Then install a Custom ROM of your choice(read the authors installing instructions first and proceed)
Click to expand...
Click to collapse
Hi Mustafa.
I´m new in this forum.
u r senior member, and maybe u can help me ( sorry about my english i´m from Brazil.)
I have gt-I9003L.
have a big problem.
the signal is poor. i can´t use in closed areas, like home, shopping mall etc. work only in open area and not so good.
i would like to fix it ( signal problem ) i unlocked the phone with galaxysim unlock.
i wanna use the phone totally. phone with no signal and no internet conection, i don´t need it.
i have superuser access, busybox, titanium backup.
i´m trying to flash my phone to check if i can solve my problem.
i did follow the instructions in this link : http://www.tarracodroid.com/index.p...scl-gt-i9003?pageNumber=1#udjaCommentsWrapper
and now, my phone is dead. only black screen. i cant turn the phone on.
Please. help me

DJEPS said:
Hi Mustafa.
I´m new in this forum.
u r senior member, and maybe u can help me ( sorry about my english i´m from Brazil.)
I have gt-I9003L.
have a big problem.
the signal is poor. i can´t use in closed areas, like home, shopping mall etc. work only in open area and not so good.
i would like to fix it ( signal problem ) i unlocked the phone with galaxysim unlock.
i wanna use the phone totally. phone with no signal and no internet conection, i don´t need it.
i have superuser access, busybox, titanium backup.
i´m trying to flash my phone to check if i can solve my problem.
i did follow the instructions in this link : http://www.tarracodroid.com/index.p...scl-gt-i9003?pageNumber=1#udjaCommentsWrapper
and now, my phone is dead. only black screen. i cant turn the phone on.
Please. help me
Click to expand...
Click to collapse
Let me try help.
No signal inside building and bad signal in outdoor, odd. Are you on custom ROM or stock ROM?
When you said dead, does it vibrate and shows the bootlogo (Samsung, galaxy scl GT-i9003) then black screen (this is called 'Boot Freeze'), or the phone didn't vibrate and it didn't show any signs of life (if you stuck on this position...... last option, change mother board. This is called 'Hard Bricked')?
I need to know are you on custom/stock ROM, your kernel, and your baseband version.
~Message sent via telepathy from Galaxy SL

Black Screen
Rich'Dawg' said:
Let me try help.
No signal inside building and bad signal in outdoor, odd. Are you on custom ROM or stock ROM?
When you said dead, does it vibrate and shows the bootlogo (Samsung, galaxy scl GT-i9003) then black screen (this is called 'Boot Freeze'), or the phone didn't vibrate and it didn't show any signs of life (if you stuck on this position...... last option, change mother board. This is called 'Hard Bricked')?
I need to know are you on custom/stock ROM, your kernel, and your baseband version.
~Message sent via telepathy from Galaxy SL
Click to expand...
Click to collapse
I ave i think is custom rom, i never change nothing in the phone.
when i try to turn on, just vibrate once, e only black screen, don´t show me boot logo...
now i cant give baseband and kernel, i don´t have access, just like i told u, only black screen, but i can put it in download mode...
didi u see the link? thanks!!!

Android X Model
Rich'Dawg' said:
Let me try help.
No signal inside building and bad signal in outdoor, odd. Are you on custom ROM or stock ROM?
When you said dead, does it vibrate and shows the bootlogo (Samsung, galaxy scl GT-i9003) then black screen (this is called 'Boot Freeze'), or the phone didn't vibrate and it didn't show any signs of life (if you stuck on this position...... last option, change mother board. This is called 'Hard Bricked')?
I need to know are you on custom/stock ROM, your kernel, and your baseband version.
~Message sent via telepathy from Galaxy SL
Click to expand...
Click to collapse
hi Dawg.
Maybe u can help me.
I made all the procedures -> forum.xda-developers.com/showthread.php?t=1894737
in this moment i´m using 2.3.6 GB for GT-I9003.
But Now my phone show me other model version GT-I9003 and the original model is GT-I9003L my model finish with "L"
And looking for information on internet i found sammobile.com.
there, i found my device model ( GT-I9003L ) and a up grade firmware 2.3.6 for GT-I9003L. ( 2.2.1 original version )
My Signal problem still the same... I´m looking for a good baseband to use my phone in BRAZIL. i don´t now if you can help me.
*#1234#
Model Version:
PDA: I9003XXKPE
PHONE: I9003XXKPE
CSC: I9003XXKPE
Settings -> About Phone
Model Number: GT-I9003 ( before the procedure above was GT-I9003L )
Firmware version: 2.3.6
Baseband Version: I9003XXKPQ
Kernel Version: 2.3.6.7-CL709629 [email protected] #9
Build Number: GINGERBREAD.XXKPQ
Could u help me!?
Thanks in advance!

DJEPS said:
hi Dawg.
Maybe u can help me.
I made all the procedures -> forum.xda-developers.com/showthread.php?t=1894737
in this moment i´m using 2.3.6 GB for GT-I9003.
But Now my phone show me other model version GT-I9003 and the original model is GT-I9003L my model finish with "L"
And looking for information on internet i found sammobile.com.
there, i found my device model ( GT-I9003L ) and a up grade firmware 2.3.6 for GT-I9003L. ( 2.2.1 original version )
My Signal problem still the same... I´m looking for a good baseband to use my phone in BRAZIL. i don´t now if you can help me.
*#1234#
Model Version:
PDA: I9003XXKPE
PHONE: I9003XXKPE
CSC: I9003XXKPE
Settings -> About Phone
Model Number: GT-I9003 ( before the procedure above was GT-I9003L )
Firmware version: 2.3.6
Baseband Version: I9003XXKPQ
Kernel Version: 2.3.6.7-CL709629 [email protected] #9
Build Number: GINGERBREAD.XXKPQ
Could u help me!?
Thanks in advance!
Click to expand...
Click to collapse
Wait, you said i9003L? Oh right, its the code for SL user in America. Try DDLF2, that is the most stable ROM.
If that doesn't effect the phone..... Something is wrong inside your phone.
Sent from my GT-I9003 using xda app-developers app

0988846477 said:
Please help !
Update media please wait
E:Con t mount /dev/block/mmcblkop1
( No such file or directory )
E: copy_dbdata_media : Can t mount SDCARD :
your storage not prepard yet.please use Ui me
nu for format and reboot actions .
copy default media content failed..
i flash cm10.1 and is failed
View attachment 1821265
Click to expand...
Click to collapse
Full KPE with odin 1.85 to solve this problem

The Procedure
Rich'Dawg' said:
Wait, you said i9003L? Oh right, its the code for SL user in America. Try DDLF2, that is the most stable ROM.
If that doesn't effect the phone..... Something is wrong inside your phone.
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
Hi Dawg!
Could you help me?
I need know, where can i find this file DDLF2 , and how can i upgrade my phone. the correct procedure.
Thanks in advance
See ya

DJEPS said:
Hi Dawg!
Could you help me?
I need know, where can i find this file DDLF2 , and how can i upgrade my phone. the correct procedure.
Thanks in advance
See ya
Click to expand...
Click to collapse
Www.sammobile.com in the firmware section
Sent from my LT26i using Tapatalk 2

DDLF2
Rich'Dawg' said:
Wait, you said i9003L? Oh right, its the code for SL user in America. Try DDLF2, that is the most stable ROM.
If that doesn't effect the phone..... Something is wrong inside your phone.
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
Hi!
i´m already with DDLF2 now!
But signal, still the same!!! i don´t know what to do anymore...
i don´t know how many times i change Android version in my phone... maybe replace antenna?
I just wanna us my phone...
Somebody help meeeeee!!!!!

i've a galaxy sl 9003 with a stock rom, suddenly before 2 days the phone took a restart and then i was left with no cellular signal, no imei, no baseband version, i tried switching sim's but in vain, asked the guy at the service centre and got a shocker that the motherboard needs to be replaced....need help on this
the phone is working its booting up i can use the wifi but the cellular part isn't working...

bhavin.trivedi said:
i've a galaxy sl 9003 with a stock rom, suddenly before 2 days the phone took a restart and then i was left with no cellular signal, no imei, no baseband version, i tried switching sim's but in vain, asked the guy at the service centre and got a shocker that the motherboard needs to be replaced....need help on this
the phone is working its booting up i can use the wifi but the cellular part isn't working...
Click to expand...
Click to collapse
try flashing a CM9 based rom...

DDJF2
Rich'Dawg' said:
Wait, you said i9003L? Oh right, its the code for SL user in America. Try DDLF2, that is the most stable ROM.
If that doesn't effect the phone..... Something is wrong inside your phone.
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
Hi! Dawg
now, my phone is running DDLF2
*#1234#
PDA - I9003DDLF2
PHONE - I9003DDLE1
CSC - I9003DDLF2
Settings -> About Phone
Model Number: GT-I9003 ( before the procedure above was GT-I9003L )
Firmware version: 2.3.6
Baseband Version: I9003DDLE1
Kernel Version: 2.3.35.7-CL1153545
[email protected] #1
Build Number: GINGERBREAD.DDLF2
The signal, is better, but just a little bit.
Everything ( when i got signal ) works including internet conection, E, H or 3G...
But i´m still trying out fin find a baseband to use my phone with TIM in Brasil.
i gotta friend in the office and his phone is Galaxy SII Lite GT-I9070. if i put both phone one beside another, my friend´s phone gotta signal inside the office, and my phone... NO SERVICE...
I don´t know what to do anymore...
Please, somebody help me!!!!

DJEPS said:
Hi! Dawg
now, my phone is running DDLF2
*#1234#
PDA - I9003DDLF2
PHONE - I9003DDLE1
CSC - I9003DDLF2
Settings -> About Phone
Model Number: GT-I9003 ( before the procedure above was GT-I9003L )
Firmware version: 2.3.6
Baseband Version: I9003DDLE1
Kernel Version: 2.3.35.7-CL1153545
[email protected] #1
Build Number: GINGERBREAD.DDLF2
The signal, is better, but just a little bit.
Everything ( when i got signal ) works including internet conection, E, H or 3G...
But i´m still trying out fin find a baseband to use my phone with TIM in Brasil.
i gotta friend in the office and his phone is Galaxy SII Lite GT-I9070. if i put both phone one beside another, my friend´s phone gotta signal inside the office, and my phone... NO SERVICE...
I don´t know what to do anymore...
Please, somebody help me!!!!
Click to expand...
Click to collapse
how about you lokk at this http://forum.xda-developers.com/showthread.php?t=1004647
i think there are all the modems and stock roms

not able to go into anything except download mode
DJEPS said:
I ave i think is custom rom, i never change nothing in the phone.
when i try to turn on, just vibrate once, e only black screen, don´t show me boot logo...
now i cant give baseband and kernel, i don´t have access, just like i told u, only black screen, but i can put it in download mode...
didi u see the link? thanks!!!
Click to expand...
Click to collapse
i too have the same problem!!!:crying:
also, not detected by odin

wasiq2210 said:
i too have the same problem!!!:crying:
also, not detected by odin
Click to expand...
Click to collapse
Download and Install the latest samsung usb driver in your pc. then try connecting to ODIN in download mod. it will detect your device.

Try Replacing your microSdCard and reflash your rom with a clean install.
If you cannot replace it you can try fixing it by downloading SD Card Formater for windows.
Plug you sdcard to your computer.
Open SDCard Formater.
Format the sdcard using the options that will set it to its default values.
If it doesnt help. Try with a new SDCard.
Please press "Thank" button if it helped you.
Sent from my GT-I9003 using XDA Free mobile app

[Q] Corupted system app. Please HELP!

Hy. My name is Steven. Yesterday i bought an Lg L Fino d290. I rooted it with purpledrake and i installed Titanium Backup. I restored some backups from my old phone (an Chinese one : Colorovo City Tone Vision). I restored Contact storage, Phone storage and some other apps. After I rebooted the phone an error pops up "Unfortunately the process com.android.phone has stopped". I tapped on "ok" and imediately it apeared again. I pressed ok again and still apeared again and again. I freaked out and i realised what I've done.. Then i delelted all app chache and rebooted the phone. Nthing changed. I entered in stock recovery mode ( i can't install cwm on my phone) and i whiped all data and cache. I rebooted the phone and nothing changed. The error dialogue is still there. I tryed to install Titanium Backup again to see what i can do but it didn't work because the error message poped up contiously. Even if i install the app from Magazine Play or from an apk file it doesn;t work. i have adb connection but not many commands are working. for example install.. I don't know what to do.. the phone keep showing me the error with and without the sim card. I can open the phone app and the contacts but i can't open the message app. Please help me. What shoul I do? I knnow i dit something wrong.. Excuse my bad english

Hello.
I don't know exactly what the problem is, but it seems as you states, that something is corrupted. Therefor i think it's better that you try to do a full restore with the LG software and reinstalling it. Try this link: http://www.downloads.techdiscussion.in/smartphones/lg-l-fino-pc-suite-and-usb-driver/.

yes, lvg2800 bro is right. u have to flash stock rom via pc.

Don't ever restore system data from one phone to another or one rom to another. They each handle this type of stuff differently. What happened is that when you restored you phone and contact data it used a different set up and corrupted your new device setup. Your gonna have to wipe the device now and start over. Lesson learned

question
How can i restore the firmware. the lg mobile supert tool tels me that is up to date and whe i click to repair it tells me that everything is ok... please from when can i get the stock rom

fanno34 said:
How can i restore the firmware. the lg mobile supert tool tels me that is up to date and whe i click to repair it tells me that everything is ok... please from when can i get the stock rom
Click to expand...
Click to collapse
You could try wiping the data from the stuff you restored in TIBU. Or by doing a factory reset

response
zelendel said:
You could try wiping the data from the stuff you restored in TIBU. Or by doing a factory reset
Click to expand...
Click to collapse
i have made five factory reset. i can't event install titanium backup because the error message pops up... i shearched the whole internet for the firmware (

fanno34 said:
i have made five factory reset. i can't event install titanium backup because the error message pops up... i shearched the whole internet for the firmware (
Click to expand...
Click to collapse
To be honest I dont know what to tell you at this point. If a factory rest doesn't work then and you can't restore the default rom I would contact t the company you got it from.

re
ok. and what should i tell them?

fanno34 said:
ok. and what should i tell them?
Click to expand...
Click to collapse
That you need the stock software for the device.

re
zelendel said:
That you need the stock software for the device.
Click to expand...
Click to collapse
Will they give it to me? (the lg service) ? And if the will give it to me, how could I flash it? I can't even make an ADB or fastboot conection.. Thanx for helping me!

fanno34 said:
Will they give it to me? (the lg service) ? And if the will give it to me, how could I flash it? I can't even make an ADB or fastboot conection.. Thanx for helping me!
Click to expand...
Click to collapse
To be honest I dont know but it's your only shot. This device a seldom used and not developed for so it's either that or toss it.

You can try a KDZ firmware, search for LG L FINO FIRMWARE LIST on google and you will find it, download for you correct model (D290) flash it via KDZ and I hope it work...
good luck

re
lucascerqueira said:
You can try a KDZ firmware, search for LG L FINO FIRMWARE LIST on google and you will find it, download for you correct model (D290) flash it via KDZ and I hope it work...
good luck
Click to expand...
Click to collapse
thanx for helping. i have a question. i found this: http://lg-phone-firmware.com/index.php?id_mod=103 . there are some firmwares for my phone but in lg support software it tells me tha i have the D9010a software version. can i flash any of them?

fanno34 said:
thanx for helping. i have a question. i found this: http://lg-phone-firmware.com/index.php?id_mod=103 . there are some firmwares for my phone but in lg support software it tells me tha i have the D9010a software version. can i flash any of them?
Click to expand...
Click to collapse
No, download only the firmware for you model, If was D290 download the hungary version if was D295 (like mine) download CIS/CIS or another of them...
Note the number of firmware...

re
lucascerqueira said:
No, download only the firmware for you model, If was D290 download the hungary version if was D295 (like mine) download CIS/CIS or another of them...
Note the number of firmware...
Click to expand...
Click to collapse
Thank you very much for helping me. I stil have some questions. What does it mean "Note the number of firmware"? In LG Spupport Tool it tells me that is have the software D29010a and my phone is D290N. What does it mean that "10a"? On the site I gave you last time at HUN firmware version it writes "10b" not "10a" and "D290" not "D290N". Can I flash the HUN firmware or those details are important and I can't? Thank you!

fanno34 said:
Thank you very much for helping me. I stil have some questions. What does it mean "Note the number of firmware"? In LG Spupport Tool it tells me that is have the software D29010a and my phone is D290N. What does it mean that "10a"? On the site I gave you last time at HUN firmware version it writes "10b" not "10a" and "D290" not "D290N". Can I flash the HUN firmware or those details are important and I can't? Thank you!
Click to expand...
Click to collapse
10a is the version of firmware i think, no problem if you flash 10b, the only problem is that it version v10b have difficults to root, but if you don't whant do it, its perfect to you
You can flash the HUN firmware, v10b or v10c...

re
lucascerqueira said:
10a is the version of firmware i think, no problem if you flash 10b, the only problem is that it version v10b have difficults to root, but if you don't whant do it, its perfect to you
You can flash the HUN firmware, v10b or v10c...
Click to expand...
Click to collapse
I understand. So how could I flash it? I have de kdz software and the firmware but i can'make an adb connection because i can't acces the settings window. Can i use the download mode or what can i do? Thank you!

I SOLVE IT! Suddently in LG SUPPORT TOOL it apeard that i cand update from D29010A to D29010D. Thank you very much for helping. after i repaired it i noticed that sometimes when the screen is off and i press the power button the phone reacts in about 5 seconds. this only happends sometimes. what cand i do? this is not a lagg problem.

[Resolved] needing help with a philips android phone

Hi everyone,
After being guest for a long time here i decided to register to ask for help.
But first, I want to thank everyone here for the very useful info cuz I revived my old phone and tweaked it a lil thanks to XDA guides. Thank u everyone.
Well. To the business.
I have now a Philips s388_m6582k dual sim smartphone and I did a hard reset due to apps laggin and other problems. But after it rebooted, the 1st use wizard works til a part where it forces closes and stop working. Then the screen stays black and does nothing. I can use the notification area and go to the settings, but I can't make it is to the android desktop aka launcher. I want to try to flash it with the stock ROM to see if I can revive it, but I don't have it and also don't know if it will restore the phone to it's default status as if it were new.
Plz, give me a hand to fix it. Also if I shutdown or reboot the phone from that black screen, it goes boot loop. The phone was rooted before the hard reset. What I can do now? I need to use it.
hope anyone reply me soon.
thnks in advice.

Download your stock ROM and flash using sp tool I think you know how.(If you don't know how just ask) and yes you will get your phone to default version
But if you're flashing your stock ROM do keep in mind that all your data will be lost,so do a backup

[email protected] said:
Download your stock ROM and flash using sp tool I think you know how.(If you don't know how just ask) and yes you will get your phone to default version
But if you're flashing your stock ROM do keep in mind that all your data will be lost,so do a backup
Click to expand...
Click to collapse
well, thnks for reply.
i forgot to mention that the device is running android kitkat 4.4 and i already backed up user data.
well, about the flashing.... i've never used sp flash tool, just odin.
can u explain me how to use it and where to get the rom?
note that the rom that i need is for the dual sim version of this phone. and i need it on spanish, due to where im located (chile).
so, if u dont mind on helping... :good:
also i found that there are 2 versions of the rom when i searched for it.
but when i get more info about the device, ill post the build version.

rivenroth740 said:
well, thnks for reply.
i forgot to mention that the device is running android kitkat 4.4 and i already backed up user data.
well, about the flashing.... i've never used sp flash tool, just odin.
can u explain me how to use it and where to get the rom?
note that the rom that i need is for the dual sim version of this phone. and i need it on spanish, due to where im located (chile).
so, if u dont mind on helping... :good:
also i found that there are 2 versions of the rom when i searched for it.
but when i get more info about the device, ill post the build version.
Click to expand...
Click to collapse
Download sp flash tool for pc .install it and open it.
Select scatter loading and browse through the stock ROM you downloaded and find the scatter text.click download in sp flash tool ,power off your device and plug to PC using USB ,wait for the success notification
Flash with Odin if you want .http://firmwarefile.com/philips-s388
Also check this page

[email protected] said:
Download sp flash tool for pc .install it and open it.
Select scatter loading and browse through the stock ROM you downloaded and find the scatter text.click download in sp flash tool ,power off your device and plug to PC using USB ,wait for the success notification
Flash with Odin if you want .http://firmwarefile.com/philips-s388
Also check this page
Click to expand...
Click to collapse
does this work with the dual sim version?

[email protected] said:
Download sp flash tool for pc .install it and open it.
Select scatter loading and browse through the stock ROM you downloaded and find the scatter text.click download in sp flash tool ,power off your device and plug to PC using USB ,wait for the success notification
Flash with Odin if you want .http://firmwarefile.com/philips-s388
Also check this page
Click to expand...
Click to collapse
also, what about the imei and the efs partition?
also, i still have to upload some captures of the error.

rivenroth740 said:
also, what about the imei and the efs partition?
also, i still have to upload some captures of the error.
Click to expand...
Click to collapse
I have flashed a stock ROM a handful of time but I never lost my imei number ,maybe once but a normal reboot fixed it.

[email protected] said:
I have flashed a stock ROM a handful of time but I never lost my imei number ,maybe once but a normal reboot fixed it.
Click to expand...
Click to collapse
well, i dont undertand how SP flash tool works.
and i dont know how to install the drivers.
i tried to install drivers using a video tutorial, but it does nothing. any help?
also, how do u use odin to flash this phone?
how i enter download mode on this phone?
i already tried to flash it, but i cant make it work (sp flash tool)

rivenroth740 said:
well, i dont undertand how SP flash tool works.
and i dont know how to install the drivers.
i tried to install drivers using a video tutorial, but it does nothing. any help?
also, how do u use odin to flash this phone?
how i enter download mode on this phone?
i already tried to flash it, but i cant make it work (sp flash tool)
Click to expand...
Click to collapse
Well you don't need to install drivers on windows PC unless your phone can't be recognised. Where are you having trouble in sp ? It's the easiest way to flash stock firmware.

[email protected] said:
Well you don't need to install drivers on windows PC unless your phone can't be recognised. Where are you having trouble in sp ? It's the easiest way to flash stock firmware.
Click to expand...
Click to collapse
well, i open it, i select scatter, then what i do?
i mean, how i do have to connect the phone?
what mode?
volume up+power: recovery
volume down+power: factory test
as i know, the phone shoulda enter a download mode. so the problem is on how i have to connect the phone.

Just extract the zip file for your firmware open sp flash tool ,select scatter loading and browse through the extracted zip file to see android scatter.txt ,just click download on the tool and connect your powered off phone to PC through USB after and wait for the confirmation.
Here's the your phones driver http://gsmusbdriver.com/philips-s388 with tutorial for install BTW.

[email protected] said:
Just extract the zip file for your firmware open sp flash tool ,select scatter loading and browse through the extracted zip file to see android scatter.txt ,just click download on the tool and connect your powered off phone to PC through USB after and wait for the confirmation.
Here's the your phones driver http://gsmusbdriver.com/philips-s388 with tutorial for install BTW.
Click to expand...
Click to collapse
ok, ill try it out :good:

rivenroth740 said:
well, i open it, i select scatter, then what i do?
i mean, how i do have to connect the phone?
what mode?
volume up+power: recovery
volume down+power: factory test
as i know, the phone shoulda enter a download mode. so the problem is on how i have to connect the phone.
Click to expand...
Click to collapse
Just click download in the tool and then turn off your phone completely (no mode) then plug it through USB wait for success notification.
PS first boot take some time 10-15 min maybe

[email protected] said:
Just click download in the tool and then turn off your phone completely (no mode) then plug it through USB wait for success notification.
Click to expand...
Click to collapse
ill try it out when i arrive at home.
then ill post if it worked or not.
hope it works. :good: :fingers-crossed:

[email protected] said:
Just click download in the tool and then turn off your phone completely (no mode) then plug it through USB wait for success notification.
PS first boot take some time 10-15 min maybe
Click to expand...
Click to collapse
well, i tried to do as u said, but when i connect the phone, it does nothing. just start charging (the battery icon appears) then goes stand-by.
also, SP flash tool does nothing when i press download. this is, after selecting the scatter. windows doesn't seems to recognize it.
so,
what i can do?
PD: also, here are some screenshots of what the phone does if i turn it on.
the setup wizard starts, then i can go on til it crashes.
anyways, i can swipe the notification/status bar and open settings. but the setup wizard never finishes and i cant get to the launcher/desktop to use it. no matter if there is a sim/sdcard.
so thats why i got the idea of reflash it to fix this problem.
i atacched some screenshots.
PD2: i forgot to mention that, if i try to shutdown/restart it, it goes to bootloop.

[email protected] said:
Just click download in the tool and then turn off your phone completely (no mode) then plug it through USB wait for success notification.
PS first boot take some time 10-15 min maybe
Click to expand...
Click to collapse
do i have to remove the battery or not?
EDIT: after various attemps, i found a videotutorial on how to fix this.
https://www.youtube.com/watch?v=oMqUdrsfxbw
and i found what was going wrong. it was the sp flash tool version.
i downloaded the same version as shown on the video and did the same as the video and....
VOILE!!! it worked!!! YAY!! n.n
but now, the only thing that i still have to do, is to get a rom with spanish, cuz i dont want it on english.
but at least, i fixed the main problem.
so here are my thanks.

so, now i need the spanish rom. can u help me to get it?
by now, i learned how to use sp flash tool. thnk u so much n.n
edit: the rom must be android 4.4.2
when I have the ROM in Spanish, this issue can be taken for closed and solved.
thanks in advance.
edit 2: hope this thread can be helpful and used by other users to solve this issue on this phone.

rivenroth740 said:
so, now i need the spanish rom. can u help me to get it?
by now, i learned how to use sp flash tool. thnk u so much n.n
edit: the rom must be android 4.4.2
when I have the ROM in Spanish, this issue can be taken for closed and solved.
thanks in advance.
edit 2: hope this thread can be helpful and used by other users to solve this issue on this phone.
Click to expand...
Click to collapse
I'm not using this phone so I've had to look up for this as well.I'll share the link for Spanish ROM when I find it .the country of the ROM doesn't matter. Also can you try to change language in the language and input tab in settings

[email protected] said:
I'm not using this phone so I've had to look up for this as well.I'll share the link for Spanish ROM when I find it .the country of the ROM doesn't matter. Also can you try to change language in the language and input tab in settings
Click to expand...
Click to collapse
thnks for reply.
well, i cant change the language to spanish.due to the fact that the rom dont have the language included. it only includes english, vietnamit, russian, korean, chinese and japanese. so thats why i need the rom including spanish.
about the country...
i dont care about it. i just care about the rom having spanish included. the original one had english, portuguese and spanish. maybe it was the one located for argentina or latin america. but anyways, as i said, the country/locale isnt important.
thnks in advance. :good:
hope u can help me to find the rom. i already made a search, but no luck. there is a jellybean rom, but the phone runs kitkat 4.4.2 as it was the stock system and the 4.2 one is for the single sim version. and the dual sim version that i found with kitkat dont have the spanish included.
waiting for ur reply.

rivenroth740 said:
thnks for reply.
well, i cant change the language to spanish.due to the fact that the rom dont have the language included. it only includes english, vietnamit, russian, korean, chinese and japanese. so thats why i need the rom including spanish.
about the country...
i dont care about it. i just care about the rom having spanish included. the original one had english, portuguese and spanish. maybe it was the one located for argentina or latin america. but anyways, as i said, the country/locale isnt important.
thnks in advance. :good:
hope u can help me to find the rom. i already made a search, but no luck. there is a jellybean rom, but the phone runs kitkat 4.4.2 as it was the stock system and the 4.2 one is for the single sim version. and the dual sim version that i found with kitkat dont have the spanish included.
waiting for ur reply.
Click to expand...
Click to collapse
can't find the Spanish ROM either.
Stick with the English version or a custom ROM like cm12(this is lollipop and is released for your phone ) I recall cm12 having espanol language.