Related
So I rooted my phone a few months ago but there weren't many mods out yet, so I waited until just today. I saw this one http://forum.xda-developers.com/showthread.php?t=1157593
I followed everything until I got to the part where I had to go into recovery mode, but before I was supposed to reinstall packages to get into CWM I accidently clicked on delete all user data and delete cache date because I misunderstood. So I got into CWM after and followed it and rebooted but nothing happened and the SGS4G screen just goes on and off. I didnt know what to do so I gave this a try. http://forum.xda-developers.com/showthread.php?t=1001759
I thought it would bring my phone back to stock and rooted because I couldnt recover or restore anything. It just put me in a more confused situation. When I reboot in recovery or just turn the power button on, the SGS4G screen goes on and off still.
So all I can do is this. Go to recovery. reboot,reinstall,delete user data or cache data. It says "signature verification failed" then "installation aborted" when I reinstall packages. And like I said, when I reboot the system all it does is the SGS4G screen problem.
Is there a way to start me fresh to a stock and rooted point? I dont think I have any files or anything on my phone anymore(if that is possible). I wanted to try this over again, but correctly obviously
Thanks for any help. I really need my phone soon
Were you in download mode when you used Odin? It should have worked. Make sure that it shows a yellow symbol with the android alien holding a shovel.
Sent from my SGH-T959V using XDA App
Thanks for the reply! And yeah i was in download mode. Odin said it went through and it lead my phone into recovery phone. After that I rebooted but I'm still experiencing the SGS4G screen going on and off still. Nothing else loads.
How did you set up Odin? You got the correct file loaded into the PDA box?
Sent from my SGH-T959V using XDA App
mrchovee said:
So I rooted my phone a few months ago but there weren't many mods out yet, so I waited until just today. I saw this one http://forum.xda-developers.com/showthread.php?t=1157593
I followed everything until I got to the part where I had to go into recovery mode, but before I was supposed to reinstall packages to get into CWM I accidently clicked on delete all user data and delete cache date because I misunderstood. So I got into CWM after and followed it and rebooted but nothing happened and the SGS4G screen just goes on and off. I didnt know what to do so I gave this a try. http://forum.xda-developers.com/showthread.php?t=1001759
I thought it would bring my phone back to stock and rooted because I couldnt recover or restore anything. It just put me in a more confused situation. When I reboot in recovery or just turn the power button on, the SGS4G screen goes on and off still.
So all I can do is this. Go to recovery. reboot,reinstall,delete user data or cache data. It says "signature verification failed" then "installation aborted" when I reinstall packages. And like I said, when I reboot the system all it does is the SGS4G screen problem.
Is there a way to start me fresh to a stock and rooted point? I dont think I have any files or anything on my phone anymore(if that is possible). I wanted to try this over again, but correctly obviously
Thanks for any help. I really need my phone soon
Click to expand...
Click to collapse
signature verificaton failed means u dont have a modified recovery record
u can get that out of the cwm final thread and push it to system/bin folder overwrite the one dont replace it that will solve that issue for u
I did exactly what the thread for Odin said. I already had the 64bit drivers installed. I downloaded the link that was provided for the ROM and then Odin. The rom took a while to download but it finally did. After that I held both volume buttons and then plugged in the usb and then it went into download mode. After that I opened odin and then clicked on PDA. The only thing that I could click on was the non-extracted rom that I downloaded aforementioned above.Gave it time to download and it said successful. Then I rebooted once it sent me to recovery mode. It also states to try and do it without sim and sd card in the phone which i just tried. It went through as well, but still has the SGS4G going on and off
RaverX3X said:
signature verificaton failed means u dont have a modified recovery record
u can get that out of the cwm final thread and push it to system/bin folder overwrite the one dont replace it that will solve that issue for u
Click to expand...
Click to collapse
I would try that but idk how i would be able to push it into the system/bin folder when all my phone is letting me do is go into recovery mode
Did u flash ext4 yet?
A suggestion for you.
If you can get into Down load mode which it sounds like you can, I would use ODIN to flash KC1 with its pit, PDA, Phone and CSC files and let it fully load up. Then ODIN Whitehawk's deoxed KD1 + root and try to flash your other ROM again.
It is very hard to hard brick these phones. Always take care to make sure the mount points in recovery are set to unmount, mount, mount and finally unmount when instructed to do so.
If your getting stuck with the ext4 section which causes this boot loop alot, what I have done is to disable voodoo lagfix, reboot into the newly flashed ROM then go back into recovery and enable voodoo. Has always worked for me.
This is my first post so I apologize if I don't make any sense lol. I develop android apps for a medical software company and I'm wanting to start creating ROMs to help out this great community.
I forgot to mention: http://forum.xda-developers.com/showthread.php?t=1117554 - [REF]{BIBLE} Galaxy S 4G (7/24/11) <5:00pm cst> is your best friend
icbinb is a great rom. you will definitely have to odin, as bytesfree says. you should use kc1 by raver. after you odin kc1, boot up normally and let the rom settle in for 10 minutes. then get a root manager, such as super manager or root explorer. download the 2 files from krylons final cwm thread. move both to the proper location using the root manager. make sure the recovery file is named properly. if it has the extra .bin extension in the filename, remove it. then shut down the phone, reboot into recovery, go to reinstall packages and the orange cwm will load. once that loads up, factory reset, wipe cache, go to mounts and check the mounts (u,m,m,u), go to install from sd card, flash the ext4 converter immediately followed by icbinb. all of these zip files should be on the root of your sd. let me know how it goes.
if you get it to flash, remember to leave the phone sitting for 10-15 minutes in order for it to settle in.
also, bytefree, welcome to xda. glad to have you contributing.
As Jager said, ICBINB and others such as Black Ice are great ROMS with lots of tweaks and features. The guys that create these ROMs are awesome in their intellect and programming abilities. Mrchovee, once you get the hang of the steps required to flash a ROM it becomes second nature, just keep at it and don't let a gimped flash bring ya down man. As I said before, these little phones are hard to brick.
I hope there is a way for me to fix this. I am a noob but, I have been successful flashing things a few times in the past (and not so lucky a few times). This time I had flashed my Infuse back to stock 2.2 Froyo UCKD5 after having Zues w/ Aries HellFire running for a couple weeks. I decided to try another ROM because I was bored. Then I screwed something up thinking I knew more than I do. As I was trying to clean things up in my files to get ready to do a back-up,something happened and about half of my apps,factory and 3rd party had no files or ?? They didn't show any MB in cache / data,in TIBU or App Mgr, only "computing...", and obviously things didn't work right. So I hit the phone's Factory Reset,went into Odin3 thinking I would try doing something I never tried before,stupid me, and installed through the PDA button, zimage root tar file, success, saw the Fugu fish and then reset Odin, turned off/ on. Pulled battery from phone, usb jig to download mode, because three button method wasn't working. I thought it had something to do with the residual kernel or bootloader from Zeus. The kernel that was running is 2.6.32.9 and I don't know what that is. Any way I thought I would install KF1 .tar Odin3 installed it but it got stuck on the Samsung power-up screen,black background white Samsung letters. I usb jigged into download mode , thinking maybe I had the wrong drivers possibly and did the Heimdall Zadig driver install, nothing changed. So, I thought that I better just reflash to stock using GTG's Ultimate Unbrick, used the UCKD5 tar and it passed. Then I unplugged the phone when it shut off to reboot, it booted into blue recovery and I hit reboot and it came right back into blue recovery. I am able to get into download mode or into the ever looping blue recovery<3e>,but nothing else. No programs,Odin, Kies, Heimdall,GTG's, recognize the phone,the laptop does and says the device may not work correctly..., but I did notice what the fails were in the recovery boot-up. So I snapped pics with my Captivate and uploaded them and I will paste them here (I think XDA lets idiots like me paste in this area?). they are readable, but if I need to type everything out I can, but not until someone asks so as to keep this already lengthy story a bit shorter. Thanks in advance,KK13/khkaiser13. sent in using my Rooted Captivate on APEX12 through XDAPremium View attachment 899419
View attachment 899420
Did you try clicking flash in Heimdall, sometimes it looks like it doesn't see the phone, but you click flash and it works. Also, have you tried clearing user data and cache? (I know you said you had factory reset at one point but now that you are stuck might be worth a try.) Looks like a boot loader issue, not sure why Heimdall doesn't see the phone, I've had good luck in the past with it.
I'm tempted to tell you to format the internal sd and try heimdall again, but maybe someone with more experience would have a better idea.
khkaiser13 said:
I hope there is a way for me to fix this. I am a noob but, I have been successful flashing things a few times in the past (and not so lucky a few times). This time I had flashed my Infuse back to stock 2.2 Froyo UCKD5 after having Zues w/ Aries HellFire running for a couple weeks. I decided to try another ROM because I was bored. Then I screwed something up thinking I knew more than I do. As I was trying to clean things up in my files to get ready to do a back-up,something happened and about half of my apps,factory and 3rd party had no files or ?? They didn't show any MB in cache / data,in TIBU or App Mgr, only "computing...", and obviously things didn't work right. So I hit the phone's Factory Reset,went into Odin3 thinking I would try doing something I never tried before,stupid me, and installed through the PDA button, zimage root tar file, success, saw the Fugu fish and then reset Odin, turned off/ on. Pulled battery from phone, usb jig to download mode, because three button method wasn't working. I thought it had something to do with the residual kernel or bootloader from Zeus. The kernel that was running is 2.6.32.9 and I don't know what that is. Any way I thought I would install KF1 .tar Odin3 installed it but it got stuck on the Samsung power-up screen,black background white Samsung letters. I usb jigged into download mode , thinking maybe I had the wrong drivers possibly and did the Heimdall Zadig driver install, nothing changed. So, I thought that I better just reflash to stock using GTG's Ultimate Unbrick, used the UCKD5 tar and it passed. Then I unplugged the phone when it shut off to reboot, it booted into blue recovery and I hit reboot and it came right back into blue recovery. I am able to get into download mode or into the ever looping blue recovery<3e>,but nothing else. No programs,Odin, Kies, Heimdall,GTG's, recognize the phone,the laptop does and says the device may not work correctly..., but I did notice what the fails were in the recovery boot-up. So I snapped pics with my Captivate and uploaded them and I will paste them here (I think XDA lets idiots like me paste in this area?). they are readable, but if I need to type everything out I can, but not until someone asks so as to keep this already lengthy story a bit shorter. Thanks in advance,KK13/khkaiser13. sent in using my Rooted Captivate on APEX12 through XDAPremium View attachment 899419
View attachment 899420
Click to expand...
Click to collapse
Before you go any further,
Read my how to..click on the first link on my sigs.
Read through several times.
There is a BIG difference b/t download mode and recovery.
Thanks, I did clear Data/Cache. I also did format the sd as a last resort but, it didn't help. I don't know if you looked at the screenshots I posted but, it says Checksum Fail and Movinand Checksum Fail. I dont know what either of those are but, willing to bet if someone knows it might be repairable. Thanks Again, to both, enochpc and qkster for the helpful info which I did not know before. khkaiser13/ kk13
khkaiser13 said:
Thanks, I did clear Data/Cache. I also did format the sd as a last resort but, it didn't help. I don't know if you looked at the screenshots I posted but, it says Checksum Fail and Movinand Checksum Fail. I dont know what either of those are but, willing to bet if someone knows it might be repairable. Thanks Again, to both, enochpc and qkster for the helpful info which I did not know before. khkaiser13/ kk13
Click to expand...
Click to collapse
Put your phone in download mode. Odin or heimdall back to stock and start over.
Don't worry about anything else as long as you can get into dl mode
Hey, thanks for responding. I know the difference b/t recov. and dload. I am stuck in recovery<3e> blue, it just returns the recovery screen no matter if I press reboot, clear cache, or clear data, or try install zip. But if I usb jig it, it goes into download mode. Thats it. What I have and don't know what or how to fix is during the reboot attempt (you can read it if you click on my screenshots) it says Checksum Fail, Movinand Fail, and lfs undone. I'm gonna try to find out more about those files ( I guess thats what those would be ???) Thanks Bro.
khkaiser13 said:
Hey, thanks for responding. I know the difference b/t recov. and dload. I am stuck in recovery<3e> blue, it just returns the recovery screen no matter if I press reboot, clear cache, or clear data, or try install zip. But if I usb jig it, it goes into download mode. Thats it. What I have and don't know what or how to fix is during the reboot attempt (you can read it if you click on my screenshots) it says Checksum Fail, Movinand Fail, and lfs undone. I'm gonna try to find out more about those files ( I guess thats what those would be ???) Thanks Bro.
Click to expand...
Click to collapse
You borked something in the ROM. That's why it won't boot. Files mismatch and don't add up. That's why you're in blue recovery.
You've to get into dl mode and flash a stock ROM img. Then start over.
qkster said:
You borked something in the ROM. That's why it won't boot. Files mismatch and don't add up. That's why you're in blue recovery.
You've to get into dl mode and flash a stock ROM img. Then start over.
Click to expand...
Click to collapse
Just to add this to what qkster said! I know you said you know the difference but be sure to have proper drivers installed I personally used GTG’s Ultimate Unbrick with 100% success. If there is any doubt about bad drivers I would also suggest reinstalling them there is a very easy to use Utility called usbdeview that lets you uninstall drivers and start fresh.
I got in a SK4g for my wife intent on upgrading her current phone. I own a 4g myself, and have Rooted/ROM'd it with no issues, we we thought it best to get her the same phone for ease of use/manipulation.
I got the phone in and used superoneclick to root it, then went through the process of putting CWM in place and installing GenericGinger_2.0_SK4G. The process ran smooth as glass (as expected) until it got to reboot. On reboot it hung up on the sidekick screen. After about an hour of waiting I pulled the battery and restarted the machine.
It came back up in recovery mode with the stock recovery (blue) text. Since then I haven't been able to get it to do anything but restart into that recovery screen. Odin doesn't see the phone in download mode and t839-Sidekick4G-UVKG2-One-Click does nothing. It shows it uploading, reboots the phone, and I'm back at the blue text. flashing the bootloaders with One-Click shows success on everything *except* uploading the bootloaders. If I tell it to re-install packages I get a 'cannot validate signature' response. I've tried using android commander to push CWM's recovery file to the phone and get 'permission' denied.
I've done a lot of searching on this site, trying most suggested fixes I've come across with no luck.
what can be done with this phone to get it back in operating condition?
Thanks in advance!
try installing kies odin wouldnt see my phone until i installed it
Kies installed and Odin saw the phone. excellent, thanks!
now, the next issue... lol
I used Odin to push KD1OdinSTOCK onto the phone. it's doing more than it was (going to the initial sidekick screen then dumping to recovery). Now it'll load through the sidekick and samsung splash screens, then reset and do it again. The same thing happens when I tried StockKG2ODIN. I'm using the sk4g.pit that I pulled from this site, could that have anything to do with it/is there another one around that I could try? Anybody have thoughts or ideas on what to do next? I've tried using t839-Sidekick4G-UVKG2-One-Click again, but it nuked the drivers kies put into place and dropped the phone back to what it was doing before.
okay, I did some light reading of this thread here
and followed the directions closely. I also went through sduvick's list of things to do with the following results:
Black screen, no logo.
1. Get into download mode by using VolDown+Touchpad+Power
2. flash full sk4g.tar.md5 as posted.
device will boot through the logo and splash screens, then repeat. note: if I leave the USB cable plugged in on reboot it will go to the battery screen, otherwise it just boot loops.
_________________________________
logo only
1. Download mode
2. Flash full package
device boot loops
_________________________________
Can't flash recovery/boot/sbl
1. Download mode
2. use PIT only, run with repartition checked
3. reboot/reDownload mode
4. run the full image in Odin.
PIT only returns a black screen on the device. running the full image in afterward returns to the boot loop.
_________________________________
Anything else
1. Download mode
2. Full tar.md5 flash in Odin
3. Ask if it doesn't work
okay, so I'm asking...
I'm still able to boot into recovery mode (blue text).
I've noted a bit of strange behavior when trying to boot into download mode. holding vol down + trackball + power does nothing. however, if I plug the phone in while powered down while holding down the trackball it'll boot into download mode, no power or vol down required.
If you can't flash with Odin, you may have a hardware problem.
Judging from your issue with installing Kies, you had a driver problem previously.
Seems that you are bumbling in the dark here. Once again, people need to be better prepared to Odin their devices before they start modding them.
In fact, getting Odin working should be the first thing a person should do with their phone after rooting and installing CWM.
Anyhow, try a different version of Odin. If that doesn't clear up your problem, I suspect some bad blocks in your flash memory are responsible here. It's a dorment issue that would really only be a problem when you flashed the device. If that's the case, you have a new paperweight.
Good luck.
i never could get kd1 to work try kg2
use pit check repartion and place tar file in pda
I don't think the problem is that I can't flash with Odin, but that the device isn't loading the ROM that's flashed. poking around in the filestructure with android commander after a fresh load shows that the system makes it onto the phone.
Speaking of poking around with Android Commander, I've noted that the device is software rooted, but not hardware rooted. the default.class file shows ro.debuggable set at 0 where it should be 1. this is keeping me from just pushing the CWM recovery onto the system and restoring the backup I made before getting into this mess. Anybody want to help me pull/edit/flash the image to change that?
As for a driver issue, that's a good possibility given that the one-click uses a driver set, kies mini uses another, kies has a different one yet and we (as a community) started screwing with the t839's using vibrant drivers. I've got them all. thusfar the only drivers I've found that work with both flavors of Odin I have (1.61 and 1.85) would be those that came with the Kies (thanks for the tip pmp326).
On bumbling in the dark, yes, yes I am. There isn't much of an instruction manual for Odin past what's written here, and 90% of that is 'put your phone in download mode, connect Odin, plug the pit in pit and the tar in PDA make sure only auto-reboot is checked and hit start'. to be honest I haven't had to use the program previously as the stock one-click actually worked on my T839. This new device is being ... difficult.
the dormant bad blocks issue you spoke about, was this something found in new-out-the-box phones? I haven't seen a lot about that in the threads, can you point in at more info, please?
at any rate, it doesn't matter which version of Odin I use, I got the same result from both. I tried using a different cable/different USB port as well. I haven't tried using a different system (yet), but don't want to go through all the trouble of setting up everything on another box. Win7 is finicky enough, trying to get everything operating on Server2k3 would most likely end up a challenge. *lol*
I'll try repartitioning with KG1 when I get back to the house.
Sounds like you are getting far enough to get your device working again to me.
If you can manage to get access to the file system with adb or Android Commander, you may be able to push the rest of the OS files you need directly. This may provide a way to get around your flashing problems.
Try adding the missing files directly with Android Commander.
also i had some troubles a while back while in recovery wipe data and cache turn off phone pull sd card then flash with odin
orange808 said:
Sounds like you are getting far enough to get your device working again to me.
If you can manage to get access to the file system with adb or Android Commander, you may be able to push the rest of the OS files you need directly. This may provide a way to get around your flashing problems.
Try adding the missing files directly with Android Commander.
Click to expand...
Click to collapse
I've gotta pop the debug lock in the default.class to be able to push anything into the system folders with Android Commander. I've found a nice walk-thru to do this, it just requires a little knowledge of c++ and some patience. with any luck I should be able to pull default.class out of its img, edit it and flash that back (most likely with Heimdall since it can do itemized flashing).
pmp326 said:
i never could get kd1 to work try kg2
use pit check repartion and place tar file in pda
Click to expand...
Click to collapse
tried it, no joy.
pmp326 said:
also i had some troubles a while back while in recovery wipe data and cache turn off phone pull sd card then flash with odin
Click to expand...
Click to collapse
tried this, brings me back to the boot loop.
orange808 said:
Sounds like you are getting far enough to get your device working again to me.
If you can manage to get access to the file system with adb or Android Commander, you may be able to push the rest of the OS files you need directly. This may provide a way to get around your flashing problems.
Try adding the missing files directly with Android Commander.
Click to expand...
Click to collapse
currently I'm running into issues with getting ADB to push onto the system as the system is claiming it isn't rooted. Is there a way I haven't read about or found to root the phone without getting into the actual O/S (i.e. from the blue recovery screen)?
If you can get in to CWM Recovery you are fine.
If you cannot, just ODIN to stock.
If you cannot do that, or it doesn't boot after that, try a different PC, os, or drivers (x86 os is usually easier then an x64 os).
If it is still no good, buy a new phone on ebay .
Once booted, Root and install CWM first thing.
Once you are in CWM Recovery...
1) Check mounts (everything should be mounted, and therefore read "unmount [...]")
2) Format EVERYTHING one at a time: cache, data, system, sdcard (optional).
(sdcard should be fine, but to be sure you can format it too after backing it up to PC first and restore what you need after)
(you probably don't need to Wipe and Wipe-Dalvik as they should already be gone, but go ahead and do it anyway)
3) Check mounts again!
4) Install a ROM (must reload it to your sdcard first if you formatted your sdcard)
5) Check mounts one final time before rebooting.
That should ALWAYS work.
NOTE: This was said before: "2. flash full sk4g.tar.md5 as posted.", but that doesn't seem right... you should not be flashing a .md5 file... you need to flash the .tar... the .tar.md5 is just a checksum. (right?)
rpmccormick said:
If you can get in to CWM Recovery you are fine.
If you cannot, just ODIN to stock.
If you cannot do that, or it doesn't boot after that, try a different PC, os, or drivers (x86 os is usually easier then an x64 os).
If it is still no good, buy a new phone on ebay .
Once booted, Root and install CWM first thing.
Once you are in CWM Recovery...
1) Check mounts (everything should be mounted, and therefore read "unmount [...]")
2) Format EVERYTHING one at a time: cache, data, system, sdcard (optional).
(sdcard should be fine, but to be sure you can format it too after backing it up to PC first and restore what you need after)
(you probably don't need to Wipe and Wipe-Dalvik as they should already be gone, but go ahead and do it anyway)
3) Check mounts again!
4) Install a ROM (must reload it to your sdcard first if you formatted your sdcard)
5) Check mounts one final time before rebooting.
That should ALWAYS work.
NOTE: This was said before: "2. flash full sk4g.tar.md5 as posted.", but that doesn't seem right... you should not be flashing a .md5 file... you need to flash the .tar... the .tar.md5 is just a checksum. (right?)
Click to expand...
Click to collapse
Wow... did you even *read* before posting? fail. I mean, thanks for taking the time to write that up and all, but you just repeated everything already said up to this point and included a summary of the ROM for n00bs thread.
Artemis257 said:
Wow... did you even *read* before posting? fail. I mean, thanks for taking the time to write that up and all, but you just repeated everything already said up to this point and included a summary of the ROM for n00bs thread.
Click to expand...
Click to collapse
I like turtles.
Artemis257 said:
Wow... did you even *read* before posting? fail. I mean, thanks for taking the time to write that up and all, but you just repeated everything already said up to this point and included a summary of the ROM for n00bs thread.
Click to expand...
Click to collapse
Even the end... I mean, your not trying to odin a "tar.md5" are you?
rpmccormick said:
Even the end... I mean, your not trying to odin a "tar.md5" are you?
Click to expand...
Click to collapse
No....
Sorry man. I've never had to ODIN (this phone). I say check the md5 to make sure you downloaded a good copy, and maybe try a different USB cable. The ADB method seems nutz... if it doesn't boot after a successful ODIN, the phone is probably a paperweight.
Good luck!
Hey Guys,
So I have been all threw the forum over the past week plus trying to find a solutions and have tried the majority of the ones on the site. Here is what happend:
HOW I GOT HERE:
I was running a CM10 nightly build from 01/15/2013 that was installed via CWM. I had been running it for about a week. When I went to bed I set my phone on the nightstand. About 2 hours into sleep the phone rebooted as I eventually woke up and noticed it thinking it was just the phone wonking out. When I up fully 6 hours later the phone was still rebooting. Since then when ever I cut on the phone it will no get passed the Google logo with the padlock. I can boot into fastboot and recovery. I am running the latest CWM 6.0.2.5.
PHONE VITALS QUICK GLANCE
Android ROM version: CM10 01/15/2013 Nightly Build
Baseband: D720SPRLC1
Bootloader: D720SPRKC5
Recovery: CWM v6.0.2.5
WHAT I HAVE TRIED
Restoring from backup
My first fix was to flash three different roms via recovery (doing full wipes each time)
Then I tried flashing a new recovery
Formatting /system, /cache, /data, and /boot and then flashing a new rom
Then I focused on trying to get the USB storage to mount so I tried using adb shell to repair the file system and that worked
Then I tried new roms and things got REALLY weird. When I would place a rom on “sdcard” it would be available to flash. When I flashed it though it would not take and upon returning to recovery it wouldn’t be there or when I mounted the storage again. After about 10 times of this I figured let me make sure I am not crazy and try the following.
Format the internal storage. In windows when I tried this windows would show that the device formatted and was empty one I dismounted after putting items on it and go back to storage by both remounting it or by recovery the old data would come right back. In Ubuntu when I tried formatting it both via disc recovery and gparted they both said the device was empty but that they were unable to create a partition.
So then I went down the path of all of the debricking tools out there including the one from AdamOutler's (I think it is called ressurector), ODIN, and the Nexus Root Tool all with varying results.
Ressurector kept saying injection failed
ODIN just does not work on the nexus s from what I can tell (spent a day researching and no one seems to give a definitive answer on this one)
And Nexus Root Tool attempts to flash back to stock but runs into an error with the baseband.
So next I decided to try and flash back to stock using the Google images. Using Ubuntu I ran the flash-all.sh that comes in the zip and kept running into the baseband issue.
So next I found OldBlue910’s post with all the OTA updates and I went after trying to use that to fix my phone. Thanks to the amount of instruction he gives I got a lot further and got the flash-all.sh in his stock zip to give me a better error message telling me which baseband I needed to have to go back to stock which when I double checked he includes in the zip. The problem is when I try to flash that radio fastboot tells me I was successful but the bootloader still reads as D720SPRLC1 and does not change regardless of what I do. When I try flashing the stock images again after flashing the radio I receive the same errors.
So now I think I have hit the real brick wall and unless someone has any advice I will need to go and buy a new phone. Hoping you guys can help. I figured if you guys can figure out a hard brick then this is still doable, I have just exhausted my own realm of knowledge.
Please and thank you’s to anyone with advice.
Could you get any lights ON? The buttons or the screen?
lights are on
Yes during the boot loop the Google logo comes up, then the screen goes black, then the Google logo comes back, and finally in about 20 seconds the lights come on. Once that happens after about 4 minutes the process starts all over again.
Hey Everyone. First of all I would like to say that I've had this device for about a year and a half, but it bricked? on me in only 4 months. I've tried countless methods to fix it but no go. Then as time went on I completely forgot about it. Now I don't have my sd card that I used for it any more.
The problem? One day I accidentally forgot to charge my tablet and it died on me, so I charged it right back up and turned it on. Everything went well, I got through the logo screen and everything, but then it just hangs there right before I hit the Home screen where you can do your code and everything.
Methods I've attempted:
I've tried going through CWM recovery to fix the issue but then I notice that it says near the bottom as it loads "E: Can't open/cache/recovery/log" and it has the same "E: Can't open/..." for everything. Can't mount, wipe cache, wipe data, restore, I have no backup (stupid right), can't do anything. Also, when I do attempt to wipe data through CWM I notice "E:Can't mount /dev/block/mmcblk0" if that has any special meaning.
I've tried flashing stock firmware through odin multiple times on different usb ports and different computers.
I've tried flashing PIT file (I'm not really sure if thats how you're supposed to do it but yea, I flashed the PIT file through odin by itself and with stock firmware)
Misc. Info: I did have a custom ROM installed(can't really remember which one), I also have the app2sd installed, the only thing that struck out to me when my tablet went out is that it received an OTA update for 4.1.2? and for some reason it went through even though I never intended to update.
I'm really, REALLY, open to any suggestion that could possibly help fix this tablet. On the other hand if the cold hard truth is that its gone forever or that I simply just have to take it back to Samsung (which I highly doubt I'll be able to), then please by all means let me know.
THANK YOU!!!
Bump
Help Please
Did you try flashing a different recovery again. CWM? Also after installing stock through odin try a factory wipe. It would probably help to know what your last rom was.
Sent from my GT-N8013 using XDA Premium App