Database Info

[HOW-TO]Fix your phone

Initially, this post was meant to fix people's phones after a bad restore from CWM, but now I'm changing it to be more general and pretty much be a guide for how to fix your phone from nearly any problem. The original reason for this post is this error:
Code:
-- bootmode=7 from cmdline...
-- Movi_check Start..!!
checksum confirmation need_checksum[0]
Not need checksum confirmation
--Movi_check already executed!!...
--movi_checking done!...
# MANUAL MODE #
It was caused by a problem with /data and this guide helped fix that. Now that several other things have come along (leaks, voodoo, etc.) people are having a host of random errors show up with their phones. This guide will hopefully get you back to a working phone regardless of what is wrong with it. Take note though, that following this guide will delete all data not on the sdcard. So, with that being said, here is how you can fix your phone.
1. Download one of the packages below as well as the PIT file.
2. Open up Odin, click PDA, and select the package you downloaded
3. Click on PIT and select the PIT file that you downloaded.
4. Get your phone into Download mode.
4a. Pull out the battery, hold down on Vol Down, and plug in the USB Cable while still holding the button.
4b. After you are in Download Mode, put the battery back into your phone. This increases the reliability of flashing with Odin
5. Make sure your phone is recognized in Odin
6. Check the box for Re-partition (Odin will fail if you check this and don't use the PIT file) and un-check the boxes for Auto-Reset and F. Reset Time.
7. Press "Start" and flash the package.
8. After it is finished flashing, take the battery out, unplug the USB cable, put the battery back in, and start up what should now be a working phone.
Download descriptions. There are 3 files linked to below. The first is the PIT file, and required for this. The PIT file is the partition information table. It tells your phone where different packages go on the phone, as well as how big partitions are on the phone. Without this information, Odin cannot properly re-partition your device. The next two files are more or less the same and you will only need one of the two, not both (unless you want them just for fun). There is ED1, which is what the phone initially shipped with, and ED2, the update that was released just after the phone was. The ED1 package may be a little bit smaller for those that are concerned about download size as it is compressed. However, you will need 7-zip or similar to extract it after downloading. Also note that this cannot be done with Heimdall as Heimdall does not have the ability to re-partition your phone, thus, you need a Windows computer to be able to follow this procedure.
All packages are available here.

Sweet, as always thanks for the work/effort on this stuff. At least now we don't have to be AS concerned atm if a restore was done in CWR and someone hoses there device.

this work for anyone?

Updated this with what I believe to be the proper steps. I was in and out at work while papi was fixing his phone, and lost track of the exact files used, but some combination of the above Odin packages and the PIT should get you back to a working phone if you are having a problem.

Good sh|t man ... phone was bound to have growing pains.

papi92 said:
this work for anyone?
Click to expand...
Click to collapse
Unfortunately, I am trying to fix this very problem right now.
I was able to get rid of the error message with your method and I can now get into CWM again.. which is progress. I used the smaller file as it looks like the bigger one was corrupt for me (may just have been a bad dl on my end). I'm re downloading the full file now.
Anyway, I used odin. Selected the charge.pit and repartitioned. I allowed that to finish. I then restarted and flashed the smaller .md5 file. I then was able to reboot into CWM.. which is where I am now as the system just boot loops on the Samsung logo ATM.
Any words of wisdom to get me out of the boot loop would be great.. I'll check back later - hopefully with news that I fixed my phone.

trebores1 said:
Unfortunately, I am trying to fix this very problem right now.
I was able to get rid of the error message with your method and I can now get into CWM again.. which is progress. I used the smaller file as it looks like the bigger one was corrupt for me (may just have been a bad dl on my end). I'm re downloading the full file now.
Anyway, I used odin. Selected the charge.pit and repartitioned. I allowed that to finish. I then restarted and flashed the smaller .md5 file. I then was able to reboot into CWM.. which is where I am now as the system just boot loops on the Samsung logo ATM.
Any words of wisdom to get me out of the boot loop would be great.. I'll check back later - hopefully with news that I fixed my phone.
Click to expand...
Click to collapse
Can you flash anything in CWM? Or how about odin the Ed1 rooted package.?

hoppermi said:
Can you flash anything in CWM? Or how about odin the Ed1 rooted package.?
Click to expand...
Click to collapse
I'm going to try that next.. it's downloading now (slowly). It may just be me, but I can't get the full ED1_CWM_Fix.tar.md5 to flash at all. I have now downloaded it from multishare direct and rapidshare and both fail the same way (Write operation failed).

hoppermi said:
Can you flash anything in CWM? Or how about odin the Ed1 rooted package.?
Click to expand...
Click to collapse
And, yes - I was able to previously flash the ed2-debloat rom from CWM, but it wouldn't boot up... I may try that again while I'm waiting for the stock-ED1 root to finish downloading.

trebores1 said:
I'm going to try that next.. it's downloading now (slowly). It may just be me, but I can't get the full ED1_CWM_Fix.tar.md5 to flash at all. I have now downloaded it from multishare direct and rapidshare and both fail the same way (Write operation failed).
Click to expand...
Click to collapse
Pretty sure that papi flashed this http://forum.xda-developers.com/showthread.php?t=1085190 one the error message was gone, and he was good to go.

Hey after you flash the smaller package given by imnuts07 I flashed stock ed1 rooted thru odin and it worked.
Sent from my SCH-I510 using XDA Premium App

papi92 said:
Hey after you flash the smaller package given by imnuts07 I flashed stock ed1 rooted thru odin and it worked.
Sent from my SCH-I510 using XDA Premium App
Click to expand...
Click to collapse
Yeah, that worked. It got rid of the error and I can now boot into stock recovery.. but I'm stuck in a droid eyeball bootloop now. Not sure what else to do. I factory reset everything. I think it's time to just return to the VZW store.

Don't return it. You got that far it can be restored. Try flashing altered beast thru odin o
Sent from my SCH-I510 using XDA Premium App

Also start up took about 10 minutes for me and make sure your phone still isn't on ext 4.
Sent from my SCH-I510 using XDA Premium App

Same here. Flashing altered beast fixed the problem and let me cwm flash debloatedv4. (4.1 seems really buggy)
Sent from my SCH-I510 using Tapatalk

papi92 said:
Also start up took about 10 minutes for me and make sure your phone still isn't on ext 4.
Sent from my SCH-I510 using XDA Premium App
Click to expand...
Click to collapse
I think I turned off ext4. In cwm I disabled the voodoo lagfix and the voice said that it was disabled. How else would I tell if it's off?
I tried your other suggestions too. Flashed altered beast, ed1 rooted, no luck getting past the bootup loop.
When you restored via Odin using the almost-everything.tar.md5, were you able to reboot and use your phone? I can't get that far. If I reboot it just hangs on the samsung logo. After that, I can flash altered beast or ed1-rooted and I get to the droid bootloop.
Trust me, I don't want to return it.. I'm sure there's a fix here somewhere.

You need to wipe data. You have too. And yes I got stuck at Samsung logo after. I had to flash stock ed1 rooted then wipe data
Sent from my SCH-I510 using XDA Premium App

trebores1 said:
I think I turned off ext4. In cwm I disabled the voodoo lagfix and the voice said that it was disabled. How else would I tell if it's off?
I tried your other suggestions too. Flashed altered beast, ed1 rooted, no luck getting past the bootup loop.
When you restored via Odin using the almost-everything.tar.md5, were you able to reboot and use your phone? I can't get that far. If I reboot it just hangs on the samsung logo. After that, I can flash altered beast or ed1-rooted and I get to the droid bootloop.
Trust me, I don't want to return it.. I'm sure there's a fix here somewhere.
Click to expand...
Click to collapse
To find out if lagfix is disabled run mount from a root terminal app, or adb shell mount if you're hooked up to your computer. If anything shows up as ext4, lagfix is still enabled. If it is all rfs/vfat/not ext4 then you're ok.

Progress has been made! I followed steps 1-8 on imnuts guide. On step 8, nothing happens(as it should). Rebooted into download mode, flashed almost-everything, rebooted, system hangs on samsung logo. Rebooted into download mode, flashed ed1-rooted. Rebooted, system boots into phone!
Now I get an error that my sim card is not supported or readable.. but at least I got back into the phone..

trebores1 said:
Progress has been made! I followed steps 1-8 on imnuts guide. On step 8, nothing happens(as it should). Rebooted into download mode, flashed almost-everything, rebooted, system hangs on samsung logo. Rebooted into download mode, flashed ed1-rooted. Rebooted, system boots into phone!
Now I get an error that my sim card is not supported or readable.. but at least I got back into the phone..
Click to expand...
Click to collapse
Did you activate another phone? I know someone w/ a TB who reactivated his Fascinate then wanted to switch back and his sim wouldn't work. Had to get a new one.
Sent from my SCH-I510 using Tapatalk

[Q] HELP!! odin wont recognize bricked phone

Hi.
I bricked my samsung galaxy s 4g when i was trying to flash it to the stock KD1, because I need to send it back to tmobile in a few days. Now I am getting the phone!pc screen no matter what I do. I even made a usb jig, but I still get the phone!pc screen. However, I do remember when I first bricked it, odin would recognize it. now odin wont even recognize it. How do i make odin recognize the phone? how can I unbrick it? please help me ASAP.
Thanks.

rehkhan97 said:
Hi.
I bricked my samsung galaxy s 4g when i was trying to flash it to the stock KD1, because I need to send it back to tmobile in a few days. Now I am getting the phone!pc screen no matter what I do. I even made a usb jig, but I still get the phone!pc screen. However, I do remember when I first bricked it, odin would recognize it. now odin wont even recognize it. How do i make odin recognize the phone? how can I unbrick it? please help me ASAP.
Thanks.
Click to expand...
Click to collapse
I had a buddy in that same situation. The phone /!\ PC. Odin did not recognize it at first however he swapped USB Ports with success.

thegoo said:
I had a buddy in that same situation. The phone /!\ PC. Odin did not recognize it at first however he swapped USB Ports with success.
Click to expand...
Click to collapse
I did try swapping ports, but it still doesn't work. Anything else I can do?

rehkhan97 said:
I did try swapping ports, but it still doesn't work. Anything else I can do?
Click to expand...
Click to collapse
What version of Odin are you using?

thegoo said:
What version of Odin are you using?
Click to expand...
Click to collapse
I am using odin3 v1.30

rehkhan97 said:
I did try swapping ports, but it still doesn't work. Anything else I can do?
Click to expand...
Click to collapse
Maybe try uninstalling & reinstalling the USB drivers, too.

Just a few minutes ago, odin somehow recognized my phone, but i plugged it out because it happened after a long time. I am trying to plug it in right now to multiple usb ports, but it is not recognizing my device anymore. why is this happening?

Try downloading the latest version of Odin.
http://sourceforge.net/projects/teamacid/files/fb/flash/Odin3 v1.85.zip/download

FBis251 said:
Try downloading the latest version of Odin.
http://sourceforge.net/projects/teamacid/files/fb/flash/Odin3 v1.85.zip/download
Click to expand...
Click to collapse
ok so i downloaded to latest version of odin, but my device gets recognized twice on ID:COM. (i get two yellow boxes saying 0:[COM4] and 1:[COM5]). what should i do? also i only loaded the PIT and PDA file. do i need to load any other files?

can you uninstall the drivers. reboot the computer. then check your device manager to make sure it is completely removed. i recommend using a program called ccleaner to wipe your computer cache and especially fix your registry. then i would reboot again. install the drivers from the bible thread. once that is done, open odin 1.85 and try plugging in the phone in download to see if it is recognized. if it is, odin the KC1 bootloaders found in fb's gb starter pack. once that is done, odin whitehawk's KD1. this sounds like a computer problem more than a phone problem.
if you are really in a bind and you need to send it into tmobile, i can do this for you.

jager555 said:
can you uninstall the drivers. reboot the computer. then check your device manager to make sure it is completely removed. i recommend using a program called ccleaner to wipe your computer cache and especially fix your registry. then i would reboot again. install the drivers from the bible thread. once that is done, open odin 1.85 and try plugging in the phone in download to see if it is recognized. if it is, odin the KC1 bootloaders found in fb's gb starter pack. once that is done, odin whitehawk's KD1. this sounds like a computer problem more than a phone problem.
if you are really in a bind and you need to send it into tmobile, i can do this for you.
Click to expand...
Click to collapse
thank you. but why should i flash with kc1 first?

rehkhan97 said:
thank you. but why should i flash with kc1 first?
Click to expand...
Click to collapse
to clear up any gremlins or footprints. better safe than sorry. depending on who you speak with at tmobile, they can really go after you if they find out you rooted and are now returning a phone that has been altered. i've had people call me before when i returned my vibrant to ask about it.

jager555 said:
to clear up any gremlins or footprints. better safe than sorry. depending on who you speak with at tmobile, they can really go after you if they find out you rooted and are now returning a phone that has been altered. i've had people call me before when i returned my vibrant to ask about it.
Click to expand...
Click to collapse
thank you for giving me these steps. it worked, and i flashed to kc1, and then kd1. but i still have one problem. on the phone, superuser is still installed. how can i get rid of that?? thanks.

rehkhan97 said:
thank you for giving me these steps. it worked, and i flashed to kc1, and then kd1. but i still have one problem. on the phone, superuser is still installed. how can i get rid of that?? thanks.
Click to expand...
Click to collapse
A few potential options, hope I didn't skip anything:
The superuser app can be removed from within the Market. If it was rooted with SuperOneClick (SOC), I believe you can use SOC to remove it. Given that you're on KD1 now you can probably get the KD1 stock firmware from samfirmware.com (you have to register, though). Or, you could flash Raver's the stock KJ6 via ODIN or you could use Kies Mini to get to stock KJ6.

jager555 said:
to clear up any gremlins or footprints. better safe than sorry. depending on who you speak with at tmobile, they can really go after you if they find out you rooted and are now returning a phone that has been altered. i've had people call me before when i returned my vibrant to ask about it.
Click to expand...
Click to collapse
You could also use the KJ6 Heimdall One-Click to write KJ6 and bootloaders to clear out the 'gremlins'

Also, there is an app called: "Bluetooth Perm Test". I am not familiar with this app, so should i delete it? Because tmobile might find out the phone was rooted if this app is installed.

If you're sending it back, do a factory data reset & go into recovery mode to wipe the caches just to be safe.
Sent from my SGH-T959V using XDA App

stephen_w said:
If you're sending it back, do a factory data reset & go into recovery mode to wipe the caches just to be safe.
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
Yes, I am sending it back. So if I do a factory data reset and clear the cache, will it get rid of root and "Buetooth Perm Test"?
Sent from my LG-P999 using XDA App

rehkhan97 said:
Yes, I am sending it back. So if I do a factory data reset and clear the cache, will it get rid of root and "Buetooth Perm Test"?
Sent from my LG-P999 using XDA App
Click to expand...
Click to collapse
I'm not sure about root but it will remove non-factory installed apps & user data. It will not remove anything on your sdcard, so if you're sending that back too then you'll want to format it.
Sent from my SGH-T959V using XDA App

stephen_w said:
I'm not sure about root but it will remove non-factory installed apps & user data. It will not remove anything on your sdcard, so if you're sending that back too then you'll want to format it.
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
ok thanks factory data reset and wiping cache did get rid of non factory apps. My other question would be: if i use kies mini to update to kj6, will root automatically uninstall? thanks.

Odin stuck at setup connection...

Hi I had odin stuck at setup connection... it was like a few mins so I unplugged then I tried to get into download mode but it said something about kies so i flashed hemidall one click and now im back to stock just wondering why it happened? I don't wanna attempt again without knowing the problem, I had all the files (4) all loaded into odin properly in the right locations why???
i was so scared i thought i bricked my new phone!!

It happened because odin is very finicky... The good thing is long as you're comfortable with the one clicks you can do anything you were attempting with odin
Sent from my SGH-T959V using xda premium

You posted this in the KB5 thread. What were you trying to flash in ODIN?

lumin30 said:
You posted this in the KB5 thread. What were you trying to flash in ODIN?
Click to expand...
Click to collapse
Trying to flash what was suggested in the lighting zap tweak thread which is gb rom and rrying to go back to stock and.then install bhudven kernel then black final then the tweak agqin luymn

Then why did you post this in the KB5 thread?

reddd123 said:
Trying to flash what was suggested in the lighting zap tweak thread which is gb rom and rrying to go back to stock and.then install bhudven kernel then black final then the tweak agqin luymn
Click to expand...
Click to collapse
That seems like a very round about way... Just one click bhud's package with cwm, reboot into recovery, factory reset/wipe/format everything (expect sd card), flash vb-final (per OP), (after the 10 min. soak in) flash lightning
Sent from my SGH-T959V using xda premium

reddd123 said:
Hi I had odin stuck at setup connection... it was like a few mins so I unplugged then I tried to get into download mode but it said something about kies so i flashed hemidall one click and now im back to stock just wondering why it happened? I don't wanna attempt again without knowing the problem, I had all the files (4) all loaded into odin properly in the right locations why???
i was so scared i thought i bricked my new phone!!
Click to expand...
Click to collapse
this is happening to me and i dont understand heimdall...can you please even just tell me how to get to stock...thanks...plwase....thanks in advace...

Do a search for the guide on Heimdall that bassmanjames wrote. It is thoroughly written. Or try again with ODIN.

[Q] Tons of problems with my Charge, any help?

I recently bought a charge off of ebay and it came in and I noticed it had an Gmail account still synced with it.
Ok I thought, I'll just remove it. I go to remove the account and it says that "some apps require this account to remove this account you need to reset phone to factory defaults".
Alright so I go to do that and the phone reboots after I wiped data/cache and I go to add my account and realize that the other account is STILL THERE. So I do the wipe a few more times and still stays there.
By this time I figured I would root the phone and install CWM and try and wipe data that way. That still didn't work and I just started trying to get a stock rom back installed and finally I did. Except the ACCOUNT WAS STILL THERE, but now I'm getting a ton of FC's ranging from google apps to other processes. I've tried to install different rom's/CWM's/kernels in ODIN on my Window's laptop and I would alwasy just get the talking voice saying things like "converting data partition" and then it would just boot back into the stock but keep force closing.
I am now using my Macbook Pro on spring break and am trying to fix this using Heimdall but i've still had no luck. Is there anyone that can help me with this?

Farbulus said:
I recently bought a charge off of ebay and it came in and I noticed it had an Gmail account still synced with it.
Ok I thought, I'll just remove it. I go to remove the account and it says that "some apps require this account to remove this account you need to reset phone to factory defaults".
Alright so I go to do that and the phone reboots after I wiped data/cache and I go to add my account and realize that the other account is STILL THERE. So I do the wipe a few more times and still stays there.
By this time I figured I would root the phone and install CWM and try and wipe data that way. That still didn't work and I just started trying to get a stock rom back installed and finally I did. Except the ACCOUNT WAS STILL THERE, but now I'm getting a ton of FC's ranging from google apps to other processes. I've tried to install different rom's/CWM's/kernels in ODIN on my Window's laptop and I would alwasy just get the talking voice saying things like "converting data partition" and then it would just boot back into the stock but keep force closing.
I am now using my Macbook Pro on spring break and am trying to fix this using Heimdall but i've still had no luck. Is there anyone that can help me with this?
Click to expand...
Click to collapse
Okay so it seems like you're sorta familiar with this kind of stuff so this shouldn't be too much trouble for you. You're going to need to go back to stock EP4D ROM and re-partition your device. Here is the link to where you can solve this problem: http://forum.xda-developers.com/showthread.php?t=1111486
You're going to have to use Odin (You're going to need Windows to run Odin) fit this because Heimdall just doesn't cut it and personally I've never used it. Get Odin 1.82, it works really well with the Charge. Download stock EP4D and also the charge.pit file from the posted link. Place stock EP4D md5 file in PDA in Odin and charge.pit in PIT. Make sure you have Re-Partition checked and Auto-Reboot and F.Reset Time UNCHECKED and press start. It will reconfigure everything and basically give you a brand new phone on the inside. Hope this helps and if you have any more questions just go back to the link to Imnuts' thread I posted.
Sent from my SCH-I510 using XDA App

Quick question
ewh1292 said:
Okay so it seems like you're sorta familiar with this kind of stuff so this shouldn't be too much trouble for you. You're going to need to go back to stock EP4D ROM and re-partition your device. Here is the link to where you can solve this problem: http://forum.xda-developers.com/showthread.php?t=1111486
You're going to have to use Odin (You're going to need Windows to run Odin) fit this because Heimdall just doesn't cut it and personally I've never used it. Get Odin 1.82, it works really well with the Charge. Download stock EP4D and also the charge.pit file from the posted link. Place stock EP4D md5 file in PDA in Odin and charge.pit in PIT. Make sure you have Re-Partition checked and Auto-Reboot and F.Reset Time UNCHECKED and press start. It will reconfigure everything and basically give you a brand new phone on the inside. Hope this helps and if you have any more questions just go back to the link to Imnuts' thread I posted.
Sent from my SCH-I510 using XDA App
Click to expand...
Click to collapse
Before I do that, which will be in a few days as I'm without a windows computer until at least wednesday. I am able to get into CWM. I installed a TweakStock but upon boot I get FC's like crazy. One after another continuously. I can't do anything. Is there anything I can do to get this working without using Odin? Thank you so much for your help as well.

Farbulus said:
Before I do that, which will be in a few days as I'm without a windows computer until at least wednesday. I am able to get into CWM. I installed a TweakStock but upon boot I get FC's like crazy. One after another continuously. I can't do anything. Is there anything I can do to get this working without using Odin? Thank you so much for your help as well.
Click to expand...
Click to collapse
No problem man I'm glad to help. If you want you can try a full data wipe. Boot into CWM and mount everything i.e. \system, \data, the whole nine yards and then wipe data/factory reset, and also wipe cache partitions and Dalvik cache. Then install whatever ROM you have available and see if that works. Otherwise you're SOL until you get a Windows computer and can Odin back to stock and re-partition everything.
EDIT: Just to clear something up, to mount everything scroll down to 'mounts and storage' in CWM.
Sent from my SCH-I510 using XDA App

Yeah, you need to run the pit file. Might be best to go back to original froyo + pit.
Tweakstock v1.4, XDA Premium

Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Moving to Q&A

Hindle1225 said:
Yeah, you need to run the pit file. Might be best to go back to original froyo + pit.
Tweakstock v1.4, XDA Premium
Click to expand...
Click to collapse
Froyo won't be necessary, just take the GB OTA file, the PIT, and use SamsungPST in bootcamp.
Sent from my SCH-I510 using xda premium

No bootcamp :/
kvswim said:
Froyo won't be necessary, just take the GB OTA file, the PIT, and use SamsungPST in bootcamp.
Sent from my SCH-I510 using xda premium
Click to expand...
Click to collapse
Looks like I'll be waiting till wednesday. I don't have bootcamp installed anymore because my wifi was always wonky. oh well.

Tried it.
kvswim said:
Froyo won't be necessary, just take the GB OTA file, the PIT, and use SamsungPST in bootcamp.
Sent from my SCH-I510 using xda premium
Click to expand...
Click to collapse
I tried this, still didn't work. I've tried using both ODIN and PST.

You're not the only one.
http://forum.xda-developers.com/showthread.php?t=1534688
Sent from my SCH-I510 using xda premium

SOL.
kvswim said:
You're not the only one.
http://forum.xda-developers.com/showthread.php?t=1534688
Sent from my SCH-I510 using xda premium
Click to expand...
Click to collapse
So it looks like i'm SOL. Great.

Farbulus said:
So it looks like i'm SOL. Great.
Click to expand...
Click to collapse
Make sure you Odin Tweakstock and flash cwm imosey kernel 4.0 (http://rootzwiki.com/topic/3426-kernel-gb-imoseyon-kernel-stock-repacked-v400-11611/ ) installed on your phone. Download and install "voodoo control app". In this app go into advance and put 2 checks in for ext4 settings, reboot your phone and report back the results.

buhohitr said:
Make sure you Odin Tweakstock and flash cwm imosey kernel 4.0 (http://rootzwiki.com/topic/3426-kernel-gb-imoseyon-kernel-stock-repacked-v400-11611/ ) installed on your phone. Download and install "voodoo control app". In this app go into advance and put 2 checks in for ext4 settings, reboot your phone and report back the results.
Click to expand...
Click to collapse
It's actually not Voodoo Control anymore. Supercurio updated it to just Voodoo Sound.
Sent from my SCH-I510 using XDA

No luck.
buhohitr said:
Make sure you Odin Tweakstock and flash cwm imosey kernel 4.0 (http://rootzwiki.com/topic/3426-kernel-gb-imoseyon-kernel-stock-repacked-v400-11611/ ) installed on your phone. Download and install "voodoo control app". In this app go into advance and put 2 checks in for ext4 settings, reboot your phone and report back the results.
Click to expand...
Click to collapse
This didn't work. I installed TweakStock and the kernel booted up and I got instant force closes that didn't allow me to do anything.

Did you ever try the first froyo build with pit?
Charge-TwStock 1.4 / Bought this app!

Hindle1225 said:
Did you ever try the first froyo build with pit?
Charge-TwStock 1.4 / Bought this app!
Click to expand...
Click to collapse
Yes, I did. I've heard of "spamming the pit file". Does anyone know how to do this?

Farbulus said:
Yes, I did. I've heard of "spamming the pit file". Does anyone know how to do this?
Click to expand...
Click to collapse
I think he means he just tried it over and over again
Charge-TwStock 1.4 / Bought this app!

Farbulus said:
This didn't work. I installed TweakStock and the kernel booted up and I got instant force closes that didn't allow me to do anything.
Click to expand...
Click to collapse
I think your partition is mess up due to ext4. I have an idea, why don't you flash the new CM9 ICS rom, this will auto reconvert yours to ext4. You have nothing to loose at this point. Make sure you MOUNT SYSTEM before flashing.
http://rootzwiki.com/topic/19688-romkangicsiml74k-cm9-ics-port-for-droid-charge-build10306/
Good luck.

buhohitr said:
I think your partition is mess up due to ext4. I have an idea, why don't you flash the new CM9 ICS rom, this will auto reconvert yours to ext4. You have nothing to loose at this point. Make sure you MOUNT SYSTEM before flashing.
http://rootzwiki.com/topic/19688-romkangicsiml74k-cm9-ics-port-for-droid-charge-build10306/
Good luck.
Click to expand...
Click to collapse
I flashed it and now its been flashing the ICS boot screen for 10+ minutes. any ideas?

Farbulus said:
I flashed it and now its been flashing the ICS boot screen for 10+ minutes. any ideas?
Click to expand...
Click to collapse
wait for 1/2 hrs if still boot screen, pull the battery and put back the battery see if it boot correctly.

Phone did not upgrade to ICS properly

First of all I apologize if this has been brought up before in other posts. I am in a mixture of frustration and panic right now because I tried upgrading to ICS on my Rogers SGS2 LTE, and it failed.
Using Kies, I followed the prompts, and for whatever reason it didn't finish. Now when I boot up the phone, it keeps telling me to use the recovery mode option in Kies. However, if I do try to use recovery mode, it always times out and tells me I may need to contact a Samsung service center. The computer has no problem communicating with the phone, AFAIK.
Basically, I'm here to ask what options I have. Currently, i'm trying to do this: http://forum.xda-developers.com/showthread.php?t=1342348 , but because the stock TAR is taking a long time to download, I'm asking if I have any other options. I would like to keep the data on my phone, but if I have to wipe it to return it to normal I'm willing to do that.
Please help.

Reboot and try again
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

Are you rooted? Are you running the stock recovery that came on the phone? If your rooted and have apps that are froze or your running a modded recovery like cwm you must flash back to stock or kies will not ever work
Sent from my SAMSUNG-SGH-I727 using xda premium

I've tried rebooting the computer I was using, and I've also tried another computer with no luck. I got the latest Kies on the other computer, connected the phone with no problem, and tried recovery mode on THAT 2nd computer, but it didn't work because it didn't recognize my recovery code that the first computer gave me.

garydv2002 said:
Are you rooted? Are you running the stock recovery that came on the phone? If your rooted and have apps that are froze or your running a modded recovery like cwm you must flash back to stock or kies will not ever work
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
I *think* I was rooted. I remember doing something a long time ago involving odin. I never installed Cyanogenmod or any other 3rd party roms.
I had Superuser under my apps, if that helps.
I wish I could reply sooner but this board is making me wait 5 mins between posts. Sorry. It's like I'm in the emergency room with a gunshot wound and I'm waiting for the doctor to finish his smoke break, then his coffee break, then washroom break, jesus
by CWM, I think you're asking about Clockwordmod? If so, yes, I had that on my phone. Does this mean I can't use the steps in this thread: http://forum.xda-developers.com/showthread.php?t=1342348 to fix my phone now? Or can I still proceed.

If you have superuser then most likely you are rooted and since you have clockworkmod especially then kies is not gonna update your phone. Your on Rodgers so you need to find the stock firmware and flash it. I'm on att or I could link you to one that would work. I got my stock firmware from Samsung website. Try going to sammobile and see if you can find the stock firmware for your phone. I'm sure since its Samsung they should have Rodgers firmware to. Download the stock firmware and flash it in Odin onto to your phone and then kies should work. If you can't find the stock firmware at sammobile then look for the stock firmware here on xda I'm sure someone on Rodgers has it....
Edit. The link up there to Odin back to stock should work. Just download the file and follow the steps in order and don't leave one out. There are no shortcuts when it comes to flashing a phone or it could be rendered useless for anything more than a paperweight. Konane is real good and would not lead anyone wrong....
Sent from my SAMSUNG-SGH-I727 using xda premium

Just flashed it via Kies, had to use ODIN by flashing stock, Odin wouldn't work till I rebooted my computer, then once Kies updated, I had had a error ( com.Android.phone stopped) but I cleared data and cache in 3e, then everything worked.
Sent from my SGH-I727R using xda premium

I just wanted to post a follow-up. I followed the steps from this thread: http://forum.xda-developers.com/showthread.php?t=1342348 and it fixed me phone. Best of all, I didn't lose anything.
I would still like to get ICS on my phone. I noticed on Sammobile's site that there is a firmware for 4.04 that was released recently. Would I somehow be able to use that, combined with Odin, to get ICS on my phone? In other words, follow all the steps in the aforementioned thread, except, use this newer firmware file? Sorry I realize this may sound like a dumb noob question, but I want to make sure I do things right.
Thanks for all the help btw.

bobbastard said:
I just wanted to post a follow-up. I followed the steps from this thread: http://forum.xda-developers.com/showthread.php?t=1342348 and it fixed me phone. Best of all, I didn't lose anything.
I would still like to get ICS on my phone. I noticed on Sammobile's site that there is a firmware for 4.04 that was released recently. Would I somehow be able to use that, combined with Odin, to get ICS on my phone? In other words, follow all the steps in the aforementioned thread, except, use this newer firmware file? Sorry I realize this may sound like a dumb noob question, but I want to make sure I do things right.
Thanks for all the help btw.
Click to expand...
Click to collapse
If you're back to stock and on Rogers, you should be able to update using Kies.

The thing is, when Odin fixed my phone, it didn't remove Superuser, so doesn't that mean my phone isn't stock anymore? I was expecting Odin to basically reset my phone back to factory settings, but it seems to have just reverted it back to before I tried updating to ICS with kies.

bobbastard said:
The thing is, when Odin fixed my phone, it didn't remove Superuser, so doesn't that mean my phone isn't stock anymore? I was expecting Odin to basically reset my phone back to factory settings, but it seems to have just reverted it back to before I tried updating to ICS with kies.
Click to expand...
Click to collapse
If you go into 3e or cwm if you still have it, you should be able to clear cache and data, so after that Kies should recognize it and start the download
Sent from my SGH-I727R using xda premium

denenatse said:
If you go into 3e or cwm if you still have it, you should be able to clear cache and data, so after that Kies should recognize it and start the download
Sent from my SGH-I727R using xda premium
Click to expand...
Click to collapse
I haven't used the stock 3e that much always just flash cwm but I would suggest that you do a factory data reset to from the recovery if 3e gives that option I've never used it so I'm not sure. But if you are still on cwm recovery kies will not ever update your phone until you put everything back stock. You must have just flashed the kernel only. Flashing just the kernel does not wipe anything you need to flash the stock firmware from sammobile in Odin and that will do a full wipe and restore everything to stock
Sent from my SAMSUNG-SGH-I727 using xda premium

Sorry but what is 3e? The only place i see cwm mentioned is under the rom manager app, but when i launch it rom manager says i don't have a rooted device and super user can't be found. Weird thing is i see super user as an app on my phone.

bobbastard said:
Sorry but what is 3e? The only place i see cwm mentioned is under the rom manager app, but when i launch it rom manager says i don't have a rooted device and super user can't be found. Weird thing is i see super user as an app on my phone.
Click to expand...
Click to collapse
Turn the phone off. Hold both volume up and volume down and hold the power button do not release the volume buttons yet. Pressing all 3 buttons when you first see the screen come on mine shows an att logo then release the power button only. The phone will then boot into either 3e stock recovery or cwm recovery
Sent from my SAMSUNG-SGH-I727 using xda premium

OK, I did what you said, and I see 3e and the option to wipe data/factory reset. So you're recommending I do this BEFORE i try to use Odin and the latest firmware for Sammobile?
Just out of curiosity, if I didn't do a reset before flashing using Odin, what would happen?

bobbastard said:
OK, I did what you said, and I see 3e and the option to wipe data/factory reset. So you're recommending I do this BEFORE i try to use Odin and the latest firmware for Sammobile?
Just out of curiosity, if I didn't do a reset before flashing using Odin, what would happen?
Click to expand...
Click to collapse
Yes. And if you don't it might not wipe everything. I suggest you do it before you flash it and again after...
Sent from my SAMSUNG-SGH-I727 using xda premium

read this to return to stock http://forum.xda-developers.com/showthread.php?t=1652398
this post is just a copy paste from another post i wrote to a n00b
read, read more, read the stickies, i read alot b4 i even attempted to flash, at least a few hundred posts and using the search button.
all problems and solutions have been posted, as u r a n00b all u have todo is invest time into reading alot of posts, because of ur post we all know u havent even bothered to read the stickies, espicially read the one w/n00b's in the title, thats y they r there. .
once u know what ur r doing and r stumped at a certain problem, believe me we can tell by how u post a question, post in the q&a forum