my phone seems to be in a really weird state right now - turning it on does absolutely nothing but adb does in fact detect it.
Code:
List of devices attached
HTXXX device
and if i run 'adb reboot recovery' i see the device in recovery mode.
Code:
$ adb reboot recovery
$ adb devices
List of devices attached
HTXXX recovery
also, while in recovery i can do adb shell and attempt to do a nandroid backup, but i get:
Code:
$ adb shell
~ # nandroid backup
E:unknown volume for path [/sdcard]
Can't mount /sdcard
at this point i've called htc to send it in for repair, but i would really like to get a backup before that and also return it to S-ON. i was running the latest clockworkmod and android revolution.
any help would really be appreciated.
Have you tried flashing an RUU?
yes, it keeps failing when trying to reboot into the bootloader. i've given up at this point - will be sending it back to htc and just hope they don't charge me some ridiculous amount just because i have s-off through the revolutionary script.
segfault82 said:
also, while in recovery i can do adb shell and attempt to do a nandroid backup, but i get:
Code:
$ adb shell
~ # nandroid backup
E:unknown volume for path [/sdcard]
Can't mount /sdcard
at this point i've called htc to send it in for repair, but i would really like to get a backup before that and also return it to S-ON. i was running the latest clockworkmod and android revolution.
any help would really be appreciated.
Click to expand...
Click to collapse
Is by any chance you phone connected as disk-drive? Try connecting it as charge only.
well the problem is the screen doesn't turn on so i can't see what's going on. although i'm pretty sure it's not connected as a disk drive because it doesn't automatically enable that.
Related
I had a couple problems so i unrooted then rerooted then i kept trying to flash recovery 1.6.2 but it kept comming up with file not found on the sdcard so i put the file in the tools folder and used android commander. It came up with 2 # then the screen went blank and it sat there so after a few minutes i did a battery pull and now i cant boot into recovery. It just sits at the boot screen.
xxwckdxx said:
I had a couple problems so i unrooted then rerooted then i kept trying to flash recovery 1.6.2 but it kept comming up with file not found on the sdcard so i put the file in the tools folder and used android commander. It came up with 2 # then the screen went blank and it sat there so after a few minutes i did a battery pull and now i cant boot into recovery. It just sits at the boot screen.
Click to expand...
Click to collapse
how long has it sat there? sometimes you have to give it a few minutes after going thru all that.
By the way if i dont try to boot into recovery it loads fine how can i reload the reocvery?
Probably 5 minutes and no go
How were you loading it in the first place? Have you checked to see if its on your card? When pushing the image, are you using the exact image name, i.e, v1.6.2-(color).img.? Also, are you holding the end-home keys at the same time long enough to see it come up?
when i first was trying i opened the terminal i had on the phone and typed flash_image recovery /sdcard/recovery-1.6.2.img and it kept comming up with bad filename(wwhich i had renamed the file to that so i dont know why) then i put it in the tools folder and tried the same from commander and it got me to here ;\
What method are you using? Try amon ras or the method used to push it to your card thru root.
havent heard of amon ras.....i just pushed it to the sdcard again and tried the same command and end up with the same thing iam trying to unroot again
nope came up with bootloader error for the unroot
tried using kitchen to reroot but it comes up with errors
Okay, these are Amon RAs methods just depending on what your using:
Install
There are several ways to install a custom recovery, choose the one that suits you most (I probably forgot a few).
via adb -> Requires a custom recovery (with test-keys)
Code:
Copy recovery-RA-heroc-v1.6.2.img to the root of your sdcard
Boot into your current custom recovery (boot while holding HOME)
Connect your Hero via usb to your pc/mac/...
adb shell
$su (not required if you have root already)
#mount -a
#flash_image recovery /sdcard/recovery-RA-heroc-v1.6.2.imgvia fastboot + adb -> In case you don't have a custom recovery, so when you get signature fail errors
Code:
adb shell reboot bootloader
fastboot boot recovery-RA-heroc-v1.6.2.img
adb shell mount /sdcard
adb push recovery-RA-heroc-v1.6.2.img /sdcard/recovery-RA-heroc-v1.6.2.img
adb shell flash_image recovery /sdcard/recovery-RA-heroc-v1.6.2.img
adb shell reboot
Or thru adb try this:
cd C:\android-sdk-windows\tools
adb shell
adb push recovery-RA-heroc-v<name>/sdcard
adb shell reboot
adb push recovery-RA-heroc-v1.5.2.img /sdcard
Pushing is equivalent of copy the file to the root of your sdcard. By the time you finished reading this it should be done. You'll know its done because the ouput will say something like transferred X bytes in X secs.
adb shell reboot
This will cause the phone to restart automatically. Wait till it is fully booted to continue.
adb shell
su
cd /sdcard/
flash_image recovery recovery-RA-heroc-v1.5.2.img
FLASHING TO THE RECOVERY TAKES SEVERAL SECONDS-- BE PATIENT. ENTER THE NEXT COMMAND ONLY AFTER THE COMMAND PROMPT RETURNS TO THE # (ROOT SYMBOL).
reboot recovery
This was complements of theresthatguy's method. Hope this helps.
to tell you the truth 1.6.2 is basically the same as 1.5.2 the only diff is the power off option and the carebear color so if you have 1.5.2 you should just keep it since you are having trouble installing it
VoLoDaR1 said:
to tell you the truth 1.6.2 is basically the same as 1.5.2 the only diff is the power off option and the carebear color so if you have 1.5.2 you should just keep it since you are having trouble installing it
Click to expand...
Click to collapse
I had 1.2.3 or whatever it was thats why i was gonna just shoot to 1.6.2 i had done it before but i dont know what happened this time. I tried the way thru adb and it has been sitting so far 10 minutes and it is still sitting at the boot screen
The first one wont work i cant get into recovery.....the second one i get "fastboot is not recognized as a internal command"and the third is the one i have been trying....
im not sure man i had trouble flashing it also try renameing it to something simple like 1.6.2.img and go to better terminal emulator type in su enter than type in the comands to flash it
flash_image /sdcard/1.6.2.img enter
do not enter mount-a before this this was the problem i was having after you hit enter just type in reboot recovery and you should have 1.6.2 also maKE sure this file is the only file on your sd card that helps good luck man let me know what happens
yeah i renamed it to recovery-1.6.2.img and i just downloaded better terminal but how do you get the keyboard up?
just tap the screen
do you have g talk
sent pm to you
ieatstarz1 said:
adb push recovery-RA-heroc-v1.5.2.img /sdcard
Pushing is equivalent of copy the file to the root of your sdcard. By the time you finished reading this it should be done. You'll know its done because the ouput will say something like transferred X bytes in X secs.
adb shell reboot
This will cause the phone to restart automatically. Wait till it is fully booted to continue.
adb shell
su
cd /sdcard/
flash_image recovery recovery-RA-heroc-v1.5.2.img
FLASHING TO THE RECOVERY TAKES SEVERAL SECONDS-- BE PATIENT. ENTER THE NEXT COMMAND ONLY AFTER THE COMMAND PROMPT RETURNS TO THE # (ROOT SYMBOL).
reboot recovery
This was complements of theresthatguy's method. Hope this helps.
Click to expand...
Click to collapse
This is what worked for me.
The 1.6.2 version did exactly to me like it is doing to you. I couldn't boot in to the recovery screen.
Sooo. I pushed the 1.5.2 image to the sdcard and then I
adb shell
su
flash_image recovery /sdcard/recovery-RA-heroc-v1.5.2.img
I was then able to boot into the 1.5.2 recovery
I then pushed the 1.6.2 image again and then it worked.
Update - 2/21/2011
If you have bricked an HTC EVO this will likely NOT work for you and this is the wrong info to be reading. I have gotten a few emails from this link about EVO 110 errors.
12/26/2010 - This thread is super old now:
If you ran the 1.56 RUU and your phone no longer turns on visit htc.com, go to support, choose Hero (Sprint) and download the 2.1 system update.
Remove battery from your phone and start it up again, then run the exe file that you just downloaded -
http://member.america.htc.com/downlo...2.27.651.6.exe
------All the info below is kept for reference -------
(As of 3/31/2010 - I am 10 for 10 for getting these back and working!! 3/3 of going back to 100% stock)
Edit: I have no longer kept track... its been over a month and I know personally I've done about 15 more of these... with about half being return to stock.
If you need to contact me, PLEASE EMAIL instead of using private messages, it'll probably turn into a google talk chat anyways, so add me on there, [email protected] (Its just easier than having to log in here and reply to private messages, since I get emails on the go as well.)
So you just ran the 1.56 RUU and got a 110 error. Now your screen turns on and stays black and if you plug the phone into USB you see the HTC logo. Unplug it and see the RUU menu.
Like you, I decided to attempt to roll back using the RUU 1.56. I was hit with the 110 error, and nothing but fastboot would work, I was able to launch ./fastboot-mac oem boot to get into the system.
I tried ./fastboot-mac boot image/bootname.img and a billion other things like everyone else who is having the issue, but just like them I had no success. In the second post below are the steps to resolve this issue. This will either take you to your first Nandroid backup or to whatever ROM you choose to flash once you get recovery back. I have not found a way to get back to 100% stock, but at least your phone wont be a brick.
EDIT:As of 3/30/2010 @ 8:30 PM I was able to get my phone completely 100% to stock. I was able to do this by retrieving a Nandroid restore from someone who used flashrec to make their initial backup. This restore does not touch the recovery image but I was able to boot into my recovery then write the HTC recovery back on top of it. I now have 100% un-rooted phone. See Post number 2 for the right way to do this.?
I've helped a few people over log me in now.
I'm willing to continue doing this but it is cutting into my family time, I will do this for a "respectable" amount of money.
Feel like I've helped you??
Buy me some coffee!
(Zip attached includes fix and stock folders. Use the fix folder FIRST to get completely booted. You can use the stock folder if you want to get 100% stock after you have a running unrooted system but have RA recovery.)
Steps to resolve:
(You SHOULD have a Nandroid backup of some sort, if not download a ROM... Fresh1.1??)
1) Boot the phone to black screen
2) Plug phone into PC/MAC - The HTC logo should appear at this point
---- If you've been doing anything else, rerun the RUU and let it fail and reboot to the HTC logo.
3) PC - fastboot oem boot | MAC - ./fastboot oem boot
(Make sure you turn on USB Debugging under Settings --> Applications --> Developer)
4) Root your phone using asroot2
Code:
adb push asroot2 /data/local/
adb shell chmod 0755 /data/local/asroot2
adb shell
/data/local/asroot2 /system/bin/sh
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
cd /system/bin
cat sh > su
chmod 4775 su
5) This is where your Nandroid backup comes into play.
(Browse to your nandroid folder, find your first backup and copy all of the .img files except system and cache to your SD card root directory)
NOTE: At this point you should dismount the SD card if you mounted inside of Android OS(Sense/Launcher)
6) run adb shell (PC - adb shell | Mac - ./adb shell)
7) type su
8) Run the following commands (if you get out of memory errors, type su again and try once more)
NOTE: Do not copy the "#"'s in the commands, the # just means you are running as SU, as opposed to the "$"
Code:
# flash_image recovery /sdcard/recovery.img
# flash_image boot /sdcard/boot.img
# flash_image misc /sdcard/misc.img
9) now... type reboot recovery
This time you should get your recovery menu, should have been RA or whatever you used... from there I did a complete nandroid restore and my system booted.
Also, after I did this I did try to let it boot without doing a recovery and it wouldnt go anywhere... but I'm fairly impatient... it may have wanted to load. I figured it best to do an entire Nandroid restore though.
-------------------------------------------------------------
100% Stock Configuration Work Around
-------------------------------------------------------------
Non-Rooted Nandroid Backup:
nandroid.7z
I was able to get my phone completely 100% to stock. I was able to do this by retrieving a Nandroid restore from someone who used flashrec to make their initial backup. This restore does not touch the recovery image but I was able to boot into my recovery then write the HTC recovery back on top of it. I now have 100% un-rooted phone. I'm not sure how to go about posting a 127MB file, what do you think it the best place?
After restoring the Nandroid backup I tried this:
Code:
Dustan-Bonneys-MacBook:tools dustanbonney$ ./adb shell
$ su
su: permission denied
Then I rebooted to recovery (I used RA 1.5.2)
Code:
Dustan-Bonneys-MacBook:tools dustanbonney$ ./adb remount
remount succeeded
Dustan-Bonneys-MacBook:tools dustanbonney$ ./adb shell
/ # mount -a
mount: mounting /dev/block/mmcblk0p2 on /system/sd failed: No such file or directory
/ # cd /sdcard
/sdcard # flash_image recovery /sdcard/Stock/recovery.img
flashing recovery from /sdcard/Stock/recovery.img
/sdcard # reboot recovery
I was booted to the Triangle and exclamation mark... I pulled the battery and booted up normally.
Stock Kernel - 2.6.27-533ce29d [email protected] )
Stock Build - 1.56.651.2 CL85027 release-keys
Other things that should be mentioned:
If you used RA 1.6.2 - I was unable to get my boot.img or the stock boot.img from the RUU's rom.zip to flash back to the recovery partition. I had to use the RA 1.6.2.img and "flash_image recovery /sdcard/recoverynamegoeshere.img"
It seems that if you've flashed the radio update, the RUU does not write the radio back successfully. Others have had issues going back to the stock radio using the upgrade.zip option as well.
I attempted to use the boot.img, recovery.img, from the RUU's rom.zip with no success. I might try it again. I was able to get to stock recovery (Triangle and exclamation) and to the Hboot menu... but from hboot I had to run the RUU and rebrick the device cause I couldnt get anything at that point, even fastboot oem boot wouldnt load.
There have been times when I get weird issues writing the flash recovery, boot, or misc and when you reboot and load "fastboot oem boot" it wont look like it goes anywhere.... check "adb devices" and your device should be listed. From there do an "adb remount" and then "adb shell" and reflash once more and then "reboot recovery".
If all else fails, I'm available for a small fee.
[email protected]
Anxiously waiting your news. Just encountered this problem today.
Updated ...
imekul said:
Anxiously waiting your news. Just encountered this problem today.
Click to expand...
Click to collapse
Wow! If you've fixed this, I think you're everyone's hero now. We won't have to worry about using the RUU now
I was going to try something similar to this today, but i was unable to brick my phone using the 1.56.651.2 RUU. I was running Flipz updated radio and DamageControl v2.0r2.. The RUU completed successfully..
I was reading over the forum post in http://forum.xda-developers.com/showthread.php?t=645002 and i read that you could boot the system using the command 'fastboot oem boot' I was going to try to use FlashRec to do the work of Flashing the recovery, then booting into recovery and use nandroid.. but you beat me to it! Good work!
I attempted flashing a new recovery image this way with no avail... I also attempted only
Code:
flash_image recovery /sdcard/recovery.img
and still was unable to boot the phone into recovery. I think it had to have been something with doing boot.img and recovery.img at the same time... I dont know what the misc.img does and I'm assuming data.img is userdata... but I did them all and then it worked...
Other users also tried flashrec and with no success... right track though.
chavo2005 said:
I was going to try something similar to this today, but i was unable to brick my phone using the 1.56.651.2 RUU. I was running Flipz updated radio and DamageControl v2.0r2.. The RUU completed successfully..
I was reading over the forum post in http://forum.xda-developers.com/showthread.php?t=645002 and i read that you could boot the system using the command 'fastboot oem boot' I was going to try to use FlashRec to do the work of Flashing the recovery, then booting into recovery and use nandroid.. but you beat me to it! Good work!
Click to expand...
Click to collapse
What do u mean by 3) PC - fastboot oem boot | MAC - oem boot?
blankd3ckskat3r said:
What do u mean by 3) PC - fastboot oem boot | MAC - oem boot?
Click to expand...
Click to collapse
if your using a pc type fastboot oem boot
if your using a mac type ./fastboot oem boot
This!
Thanks Regaw
regaw_leinad said:
if your using a pc type fastboot oem boot
if your using a mac type ./fastboot oem boot
Click to expand...
Click to collapse
Trying this right now.
So far, am getting lots of "mtd: write error" and "mtd: re-read error" Out of memory errors for flashing the recovery image. Guess I'll give this some time, and try to su again and reflash? Or should I kill it as soon as the Out of memory errors pop up and try again?
If you get errors like...
adb shell
su
flash_image recovery .........
(out of memory... etc)
Then...
just su again... so you really su twice
its what I had to do.
imekul said:
Trying this right now.
So far, am getting lots of "mtd: write error" and "mtd: re-read error" Out of memory errors for flashing the recovery image. Guess I'll give this some time, and try to su again and reflash? Or should I kill it as soon as the Out of memory errors pop up and try again?
Click to expand...
Click to collapse
Trying it a second time, and so far am getting a bunch of Out of memory errors. After the first one "finished," I did as you recommended and typed "su" a second time, and then typed the "flash_image recovery /sdcard/recovery.img" command.
So far, looks like it's giving the same errors the second time around.
This second attempt, it ended with "error writing recovery: No space left on device."
Just to be sure, I checked the SD card, and that has over 1 GB of free space.
If you're willing to allow something like logmein.com or some way for me to remote assist you, I would like to try. [email protected] if you're in.
imekul said:
This second attempt, it ended with "error writing recovery: No space left on device."
Just to be sure, I checked the SD card, and that has over 1 GB of free space.
Click to expand...
Click to collapse
Sounds awesome. Thanks. I'll e-mail you now.
Dun Dun Dun... The results are in!
imekul said:
Sounds awesome. Thanks. I'll e-mail you now.
Click to expand...
Click to collapse
dfbonney is the man!!
After a friendly little session on LogMeIn Express, I am good as new! How awesome!!
imekul said:
dfbonney is the man!!
After a friendly little session on LogMeIn Express, I am good as new! How awesome!!
Click to expand...
Click to collapse
We ended up just needing to run
Code:
adb shell
reboot
fastboot oem boot
adb shell
su
//flash commands here
that seemed to do it. so make sure if you're having issues to restart the device and try again!
Edit: Also, we didnt get data.img to work so we only did boot, recovery, and misc.img's
Hey,
Ok so a little backstory before my problem: So I was in the middle of putting a new ROM on my captivate. I had one before but i wanted to change so I put the rom in update.zip and installed it will clockworkmod recovery. It installed fine I think but then when I tried to boot it gets stuck on the boot screen. So i tried to boot in recovery mode. I geld down both the volume buttons and the power button until it reboots twice, then I let go of the power button. but it still gets stuck on the boot screen and does not go into recovery mode. So i plugged it into my computer and using
Code:
adb devices
it shows up under recovery mode. So far so good. I can use the
Code:
adb reboot
and
Code:
adb push
commands fine. but when i try to use
Code:
adb shell
it says
Code:
exec '/system/bin/sh' failed: No such file or directory (2)
So i can not reflash the recovery image. I read that I just needed to mount the /system file. But i do not know how to do this. the "mount" command does not work with adb. I would appreciate anything to help me to either reflash the rom or restore to factory or anything where i can work off of. thanks
I have exactly the same problem.
Did you get to a solution to this?
Good luck, dude.
Is there a solution to this without using a Motorola Factory cable? I don't have the resources to make one and I don't have money to buy one.
I'm not sure putting the rom into "update.zip" was the right choice.
adb shell could fail because the partition is not mounted, the sh binary is not installed, or not at the correct location
If you can still get the captivate into download mode, you could use odin/heimdall to flash a working ROM.
First of all...thanks to everyone that has EVER posted in the XDA forums! I've spent days reading them and I came across one that had a suggested solution for my problem. So let's start...
1) Bricked
2) ADB is finally working again...so..not a problem any longer
(Don't ask me how I got it to work again....I have no idea. System was wiped while using TWRP from a bootloop)
3) Now...with system wiped I have no '/system/bin/sh'
4)adb shell will not work because of this. adb root does not work because of production model. adb remount is not permitted.
Now....I came across a thread that suggest using r2.6.2.kindlefire.boot.insecure.img and zergRush. I have the zergRush file, but I need the r2.6.2.kindlefire.boot.insecure.img to push with adb.
Does anyone know where I can get the r2.6.2 at? Filesonic is disabled and Multiupload will not return page.
Link I came across: addictivetips /mobile/gain-root-adb-access-with-insecure-boot-image-for-kindle-fire/
Hi XDA-D,
I kinda helped my tf300t over the edge. I wanted to flash the new stock rom for troubleshooting purposes. I wanted to boot into Recovery but it froze the machine. Because I had fastboot options I pushed a the newest recovery (v6.0.2.3) and all seemed well untill I rebooted. Whatever I do The device boots into Recovery. It doesn't try to load the Rom and doesn't respond to "power vol down/up)
Recovery does start but with errors:
Code:
E: Can't mount /cache/recovery/command
E: Can't mount /cache/recovery/log
E: Can't mount /cache/recovery/last_log
and can't mount any directory (no /system, /cache, /data, /sdcard, etc)
Fast boot doesn't respond any more (keeps waiting for devices and doesn't list the tablet)
Adb recognises the tablet:
Code:
adb status-window
<-[2J<-[2HAndroid Debug Bridge
State unknown
adb devices
111111111111111111 Recovery
I think the boodloader is corrupt and the device defaults to recovery but the directories are gone, making sure that I can't install via fastboot or micro sd. Is there a way to restore this tablet with adb but without fastboot?
RVexx said:
Hi XDA-D,
I kinda helped my tf300t over the edge. I wanted to flash the new stock rom for troubleshooting purposes. I wanted to boot into Recovery but it froze the machine. Because I had fastboot options I pushed a the newest recovery (v6.0.2.3) and all seemed well untill I rebooted. Whatever I do The device boots into Recovery. It doesn't try to load the Rom and doesn't respond to "power vol down/up)
Recovery does start but with errors:
Code:
E: Can't mount /cache/recovery/command
E: Can't mount /cache/recovery/log
E: Can't mount /cache/recovery/last_log
and can't mount any directory (no /system, /cache, /data, /sdcard, etc)
Fast boot doesn't respond any more (keeps waiting for devices and doesn't list the tablet)
Adb recognises the tablet:
Code:
adb status-window
<-[2J<-[2HAndroid Debug Bridge
State unknown
adb devices
111111111111111111 Recovery
I think the boodloader is corrupt and the device defaults to recovery but the directories are gone, making sure that I can't install via fastboot or micro sd. Is there a way to restore this tablet with adb but without fastboot?
Click to expand...
Click to collapse
Hmm that doesnt sound good, CWM really sucks i refuse to use it lol. Does it have a terminal you enter? and have you been able to adb push anything to the tablet?
im thinking if you can adb push twrp to the device and open a adb shell you could try dd if=*path-to-twrp* of=/dev/block/mmcblk0p4
I havnt used the above in your situation so not sure if it will work, hopefully someone else can help. Goodluck mate
JoinTheRealms said:
Hmm that doesnt sound good, CWM really sucks i refuse to use it lol. Does it have a terminal you enter? and have you been able to adb push anything to the tablet?
*
im thinking if you can adb push twrp to the device and open a adb shell you could try dd if=*path-to-twrp* of=/dev/block/mmcblk0p4
*
I havnt used the above in your situation so not sure if it will work, hopefully someone else can help. Goodluck mate
Click to expand...
Click to collapse
*
Haven't tried to push a different recovery because I'm afraid I'll break the last thing that works. I think I can get a remote shell via adb. I was hoping there is a way to push a new kernel and boot but my knowledge is lacking.
RVexx said:
*
Haven't tried to push a different recovery because I'm afraid I'll break the last thing that works. I think I can get a remote shell via adb. I was hoping there is a way to push a new kernel and boot but my knowledge is lacking.
Click to expand...
Click to collapse
Id wait for someone elses input, i dont wanna mess with your adb lol. Im not sure about the above method since adb push would need access to sdcard, dd might work if you already have twrp on the device, again if you can access adb shell and dd works you might have a few things that could work, but even if you have a bricked device its not the end of the world. Asus might repair it, if not and your willing motherboards for these devices seem quite cheap, and if so you will have access to nvflash so something like wont happen again.
JoinTheRealms said:
Id wait for someone elses input, i dont wanna mess with your adb lol. Im not sure about the above method since adb push would need access to sdcard, dd might work if you already have twrp on the device, again if you can access adb shell and dd works you might have a few things that could work, but even if you have a bricked device its not the end of the world. Asus might repair it, if not and your willing motherboards for these devices seem quite cheap, and if so you will have access to nvflash so something like wont happen again.
Click to expand...
Click to collapse
Anyhow, thanks for thinking with me
I'll wait for someone who absolutely loves CWM
so i went into FKU franco kernel updater and changed my CPU max speed from 1500 back to the default but did not change my voltage settings back to default. now the device is softbrocked and just boots to the google nexus splash screen
I have tried flashing:
system.img
boot.img
bootloader.img
stock 4.4.4 kernel
yet regardless of flashing the above the device still is softbricked and wont get past the nexus google logo.
the only thing i have not flashed over is my user data and thats because i dont want to lose my pictures and video of my little boy that i didn't get to back up yet due to my dropbox just hitting its limit.
Im hoping I can remove the franco updater app and its user data and boot but maybe thats not possible?
Thanks for any and all help!
nextelbuddy said:
so i went into FKU franco kernel updater and changed my CPU max speed from 1500 back to the default but did not change my voltage settings back to default. now the device is softbrocked and just boots to the google nexus splash screen
I have tried flashing:
system.img
boot.img
bootloader.img
stock 4.4.4 kernel
yet regardless of flashing the above the device still is softbricked and wont get past the nexus google logo.
the only thing i have not flashed over is my user data and thats because i dont want to lose my pictures and video of my little boy that i didn't get to back up yet due to my dropbox just hitting its limit.
Im hoping I can remove the franco updater app and its user data and boot but maybe thats not possible?
Thanks for any and all help!
Click to expand...
Click to collapse
Do you have a custom recovery? If so, use adb while in recovery to pull your files. If not, then flash one then pull them.
Not sure why you mentioned "boot.img" then "stock 4.4.4 kernel", boot.img = the kernel lol
Don't know why your device won't boot even after flashing stock boot.img, but if you use TWRP you can use the file manager to delete the .apk/other files.
Lethargy said:
Do you have a custom recovery? If so, use adb while in recovery to pull your files. If not, then flash one then pull them.
Not sure why you mentioned "boot.img" then "stock 4.4.4 kernel", boot.img = the kernel lol
Don't know why your device won't boot even after flashing stock boot.img, but if you use TWRP you can use the file manager to delete the .apk/other files.
Click to expand...
Click to collapse
thanks, i deleted the franco files and still cant boot.
i want top pull files but it looks like I need ADB and currently i can only get into fastboot mode.
(i'm using wugfresh toolkit, i know some say manual is the way to go but right now this is what I have to go on and have had no issues thus far with it)
i was using the button pull files in the tool kit but its not detecting the device since im in fastboot mode.
i swear I did a factory reset before and my photos were still present but many articles online say in 4.4 that a factory reset will wipe your photos.
nextelbuddy said:
thanks, i deleted the franco files and still cant boot.
i want top pull files but it looks like I need ADB and currently i can only get into fastboot mode.
(i'm using wugfresh toolkit, i know some say manual is the way to go but right now this is what I have to go on and have had no issues thus far with it)
i was using the button pull files in the tool kit but its not detecting the device since im in fastboot mode.
i swear I did a factory reset before and my photos were still present but many articles online say in 4.4 that a factory reset will wipe your photos.
Click to expand...
Click to collapse
Don't use toolkits. You say you've had no issues but you have and that issue is that you don't know how to use adb and fastboot
Click the link in my signature to get to the sticky roll -up thread. From there you will find my "adb and fastboot. What is it?" thread. Please read it. You'll have ALL the information you need to get your photos etc off your sdcard
Stock recovery - factory reset wipes sdcard
Custom recovery - factory reset preserves sdcard
Sent from my Nexus 5 using Tapatalk
rootSU said:
Don't use toolkits. You say you've had no issues but you have and that issue is that you don't know how to use adb and fastboot
Click the link in my signature to get to the sticky roll -up thread. From there you will find my "adb and fastboot. What is it?" thread. Please read it. You'll have ALL the information you need to get your photos etc off your sdcard
Stock recovery - factory reset wipes sdcard
Custom recovery - factory reset preserves sdcard
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Thanks,
since i can not boot, i am forced to use TWRP recovery and then go ingo CMD shell and ADB there however when I do ADB Devices i get the serial number showing its connected but then it says RECOVERY at the end.. much lke when you are in fastboot it says FASTBOOT at the end of the device.
i tried doing a pull using this:
adb shell
mount data
exit
adb pull data/media/0 c:\MyBackup
but when I do ADB Shell, the command prompt says this
~ # ←[6n
if t that prompt i type mount data then I get this:
mount data
mount: mounting /dev/block/mmcblk0p28 on /data failed: Device or resource busy
~ # ←[6n
im not sure how else to get to a working ADB to perform a proper pull if i cant boot into the device fully
nextelbuddy said:
Thanks,
since i can not boot, i am forced to use TWRP recovery and then go ingo CMD shell and ADB there however when I do ADB Devices i get the serial number showing its connected but then it says RECOVERY at the end.. much lke when you are in fastboot it says FASTBOOT at the end of the device.
i tried doing a pull using this:
adb shell
mount data
exit
adb pull data/media/0 c:\MyBackup
but when I do ADB Shell, the command prompt says this
~ # ←[6n
if t that prompt i type mount data then I get this:
mount data
mount: mounting /dev/block/mmcblk0p28 on /data failed: Device or resource busy
~ # ←[6n
im not sure how else to get to a working ADB to perform a proper pull if i cant boot into the device fully
Click to expand...
Click to collapse
It could say "device busy" if data is already mounted. Does twrp have a "mounts and storage" menu like CWM? Where you can mount data? If so, check if it is mounted there (would typicall say "unmount data" if it was mounted, otherwise it would say "mount data" if it is unbmounted)
nextelbuddy said:
Thanks,
since i can not boot, i am forced to use TWRP recovery and then go ingo CMD shell and ADB there however when I do ADB Devices i get the serial number showing its connected but then it says RECOVERY at the end.. much lke when you are in fastboot it says FASTBOOT at the end of the device.
i tried doing a pull using this:
adb shell
mount data
exit
adb pull data/media/0 c:\MyBackup
but when I do ADB Shell, the command prompt says this
~ # ←[6n
if t that prompt i type mount data then I get this:
mount data
mount: mounting /dev/block/mmcblk0p28 on /data failed: Device or resource busy
~ # ←[6n
im not sure how else to get to a working ADB to perform a proper pull if i cant boot into the device fully
Click to expand...
Click to collapse
ok so i went into TWRP and UNMOUNTED DATA
and then I went back in to cmd prompt and tried mount again and it worked i guess since theres no error. I typed EXIT and was brought back to normal windows command prompt. I then typed
adb pull data/media/0 C:\Users\srobertson\Desktop\Nexus 5 7-15-2014 DCIM
and when I hit enter it just shows a list of ADB commands as if it didnt recognize anything yet when I do ADB DEVICES it shows the device and ID
nextelbuddy said:
ok so i went into TWRP and UNMOUNTED DATA
and then I went back in to cmd prompt and tried mount again and it worked i guess since theres no error. I typed EXIT and was brought back to normal windows command prompt. I then typed
adb pull data/media/0 C:\Users\srobertson\Desktop\Nexus 5 7-15-2014 DCIM
and when I hit enter it just shows a list of ADB commands as if it didnt recognize anything yet when I do ADB DEVICES it shows the device and ID
Click to expand...
Click to collapse
If you're going to put spaces in your folder names, you'll have to enclose the entire path in "...
Example
adb pull data/media/0 "C:\Users\srobertson\Desktop\Nexus 5 7-15-2014 DCIM"
Best to avoid spaces though.
I'll put this in the guide, thanks.
rootSU said:
If you're going to put spaces in your folder names, you'll have to enclose the entire path in "...
Example
adb pull data/media/0 "C:\Users\srobertson\Desktop\Nexus 5 7-15-2014 DCIM"
Best to avoid spaces though.
I'll put this in the guide, thanks.
Click to expand...
Click to collapse
Thanks so much for your help
I ended up taking the leap and performing a Factory reset from TWRP and when I logged back into the phone I saw all my media was still present Whew.
just for posterity I went ahead and tried your code in ADB to make sure the quotes worked and it did so thank you very much and i will keep those notes handy for next time.