Database Info

[Q] Help！About the 15m radio

I've flashed the 15mb ram with radio 2.22.27.08&hboot 1.33.0013d and mt3g before, then I flashed super e. Now I want to flash mt3g again, but after finishing that ,my g1 just stay at the first screen(TM G1), I've tried the cm 6.1, the result was just the same. Now I can only flash super e...What should I do?

flash the ezterry's new kernel after flashing the rom

The new kernal ? I've flashed ezBiffTestKernal20101106-2708_S.zip

ma0130 said:
The new kernal ? I've flashed ezBiffTestKernal20101106-2708_S.zip
Click to expand...
Click to collapse
and you did flashed the new hboot ?
right after you flashed the rom, then IMMEDIATLY flash the ezbifftestkernel then reboot

Yes, i've done that

ma0130 said:
Yes, i've done that
Click to expand...
Click to collapse
hmm try this::
Fully wipe your phone.
Then flash rom.
then flash new kernel.
then reboot and wait.

Thanks a lot! But how long should I wait? 20min?

I think you forgot the spoofspl
Sent from my HTC Magic using XDA App

JDMDC2 said:
I think you forgot the spoofspl
Sent from my HTC Magic using XDA App
Click to expand...
Click to collapse
No because he isnt getting any error.

yes, during flashing no error occured

Sent from my HTC Magic using XDA App

Just try the spoofspl I think u do need it.
Sent from my HTC Magic using XDA App

JDMDC2 said:
Just try the spoofspl I think u do need it.
Sent from my HTC Magic using XDA App
Click to expand...
Click to collapse
No doesnt have to.
cause i did that procedure i described and always worked for me..
so if you just dont receive an error its ok.

nickislauw said:
hmm try this::
Fully wipe your phone.
Then flash rom.
then flash new kernel.
then reboot and wait.
Click to expand...
Click to collapse
it still doesn't work, I've been waiting for almost 10 mins, what should i do?

ma0130 said:
it still doesn't work, I've been waiting for almost 10 mins, what should i do?
Click to expand...
Click to collapse
Did you really fully wiped everything ?

JDMDC2 said:
Just try the spoofspl I think u do need it.
Sent from my HTC Magic using XDA App
Click to expand...
Click to collapse
How should i use it?

nickislauw said:
Did you really fully wiped everything ?
Click to expand...
Click to collapse
Of course, everything...

This always worked for me
Full swype
H boot
Reboot
New radio
Reboot
Kernel
Rom
Spoof spl
And reboot
Sent from my HTC Magic using XDA App

ma0130 said:
Of course, everything...
Click to expand...
Click to collapse
WTF weird man..
I dont know then. sorry

JDMDC2 said:
This always worked for me
Full swype
H boot
Reboot
New radio
Reboot
Kernel
Rom
Spoof spl
And reboot
Sent from my HTC Magic using XDA App
Click to expand...
Click to collapse
flash the kernel before flashing rom?

[Q] Is it possible to change the baseband firmware

Hello,
Recently I've been facing SOD on my Tab, and I read somewhere here on xda, that it's sometimes a modem problem.
So I was thinking of changing the modem/baseband firmware only.
Is that possible and how?
I know officially there is only ICS for the Tab, and I'm currently running PA v2.50; JB.
Thanks all!
//M

Bump..
Sent from my GT-P6800 using xda app-developers app

Well, i dont know which version of the tab you have (p6810 ? p6800 ?)
There is a thread discussiong wifi-dropping problems including possible solutions to flash another roms baseband if I understand it right. You might thus have a look at this thread: http://forum.xda-developers.com/showthread.php?t=1754937

Sorry forgot to mention it's a P6800. Well, I'm not having issues with my WiFi dropping, I'm having sleep of deaths. Meaning the Tab would sleep and pushing the power button will not wake it up, I have to hold the power button for 10 seconds to force a reboot.
Sent from my GT-P6800 using xda app-developers app

sergani said:
Sorry forgot to mention it's a P6800. Well, I'm not having issues with my WiFi dropping, I'm having sleep of deaths. Meaning the Tab would sleep and pushing the power button will not wake it up, I have to hold the power button for 10 seconds to force a reboot.
Sent from my GT-P6800 using xda app-developers app
Click to expand...
Click to collapse
Kernel issue ?

UpInTheAir said:
Kernel issue ?
Click to expand...
Click to collapse
Well, maybe... I don't know
Any help? Problem is that I'm facing the same problem since stock ICS, and already tried a few custom ROMs, ending up with JellyBean now.
One thing to note is that I could limit down the rate of SOD's when I turn auto-brightness off before getting the device to sleep.

sergani said:
Well, maybe... I don't know
Any help? Problem is that I'm facing the same problem since stock ICS, and already tried a few custom ROMs, ending up with JellyBean now.
One thing to note is that I could limit down the rate of SOD's when I turn auto-brightness off before getting the device to sleep.
Click to expand...
Click to collapse
Maybe try a custom kernel and governor (Pegasus) or stock kernel and with app such as Voltage Control to change governor.
Sent from my GT-I9300 using xda premium

UpInTheAir said:
Maybe try a custom kernel and governor (Pegasus) or stock kernel and with app such as Voltage Control to change governor.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Hello,
I really appreciate the time you're taking to help with my problem - can you help though with more details?
I mean, I'm running Androguide's Paranoid Android v2.5, is it possible to flash custom Kernels? Or do I have to get another custom ROM?
I'm basically missing the bigger picture you know
Detailed help is very highly appreciated
Thanks
//M

Any ideas?
Sent from my GT-N7000 using xda app-developers app

Your problem can have a multitude of causes.
However to answer your initial question :
You can fash whatever baseband you like using PC or Mobile odin.
Just download and flash an apropriate modem.bin for your P6800
I would start by fladhing stock HC rom and then see if the problem persists on HC.
Oh and while you are rooted (i suppose), download the emmc brick bug test app from playstore to check your internal memory.

FYR. the baseband is the modem.bin inside the stock rom.
It can be replaced to your p6800 via Odin or Mobile Odin. I have extracted a few modem from different stock roms. P6800XXLA1, P6800XXPLA3, P6800XXPLW and P6800DXLP7. send me your e-mail if you want them.
For the Paranoid rom, I'm using my own build of v2.55, wifi and gps(I got 9 sat.) works fine for my p6800.
I think Androguide's 2.55 will come soon and solve you problem.

Thanks all for your input .. I've flashed another modem.bin and haven't faced SOD's.
Note however that I turn Auto brightness and WiFi off every time I let the Tab go to sleep.
I'll wait for PA 2.55 and see how things go.

daniel_hk said:
FYR. the baseband is the modem.bin inside the stock rom.
It can be replaced to your p6800 via Odin or Mobile Odin. I have extracted a few modem from different stock roms. P6800XXLA1, P6800XXPLA3, P6800XXPLW and P6800DXLP7. send me your e-mail if you want them.
For the Paranoid rom, I'm using my own build of v2.55, wifi and gps(I got 9 sat.) works fine for my p6800.
I think Androguide's 2.55 will come soon and solve you problem.
Click to expand...
Click to collapse
Hi,
Can you share your own build v2.55 ROM with us ?
Is there any bug ?

he's already posted it on other thread yesterday as i request the firmware... here's the link...
http://kuai.xunlei.com/d/MTWGAHYFVZHI

sas_sas said:
Hi,
Can you share your own build v2.55 ROM with us ?
Is there any bug ?
Click to expand...
Click to collapse
In case someone have trouble with xunlei. There are two more links for my rom:
https://skydrive.live.com/redir?resi...GUN2PFFXUWO7ig
http://pan.baidu.com/share/link?shar...&uk=1512265283
I use only Tablet mode and very occasonially the status bar will restart itself. I don't know if there are any other bugs but it works fine for me.
Goodluck!

also another link here.... using it without a problem... thanks to daniel_hk
http://www.mediafire.com/?cwv4z67n7ilf9rn

Thanks guys.
Should I download and flash through CWM without any wipes?
Sent from my GT-N7000 using xda app-developers app

sergani said:
Thanks guys.
Should I download and flash through CWM without any wipes?
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
if you are coming from pa 2.5 no need to wipe... just flash it with cwm

Got a symlinks error, saying that some symlinks can not be found...

edan1979 said:
also another link here.... using it without a problem... thanks to daniel_hk
http://www.mediafire.com/?cwv4z67n7ilf9rn
Click to expand...
Click to collapse
Got a symlinks error, saying that some symlinks can not be found...
Any thoughts?

[I9001BUKPC][Stock rom][12.2012]

New firmware for gt-i9001.
Someone try it ?
Same launcher bug ? Wifi disconnect ?
DOWNLOAD LINK

what baseband is there?
Device: Samsung Galaxy S Plus (I9001)
ROM: PAC-man rom 18.0.0 by camcory
Kernel: Stock
Recovery: TWRP TeamWin Recovery Project 2.2.1
USING XDA-APP

xeGox said:
what baseband is there?
Device: Samsung Galaxy S Plus (I9001)
ROM: PAC-man rom 18.0.0 by camcory
Kernel: Stock
Recovery: TWRP TeamWin Recovery Project 2.2.1
USING XDA-APP
Click to expand...
Click to collapse
[I9001BUKPC][Stock rom][12.2012]

Why dont you guys download it and try? It takes maybe an hour.
Sent from my GT-I9001 using xda app-developers app

XeLLaR* said:
Why dont you guys download it and try? It takes maybe an hour.
Sent from my GT-I9001 using xda app-developers app
Click to expand...
Click to collapse
Testing it for about ~1h.
Network signal is better than on KPL.
Battery drain - still 99%, as it was before I flashed it.
I'm not sure if it is because of new baseband or just because of lower electromagnetic interference at this time of day, but my WiFi connects to router much faster than before.
PS: Here is a baseband file only - DOWNLOAD (for ODIN, 19Mb). Made by SHiFT!.

apkfox said:
Testing it for about ~1h.
Network signal is better than on KPL.
Battery drain - still 99%, as it was before I flashed it.
I'm not sure if it is because of new baseband or just because of lower electromagnetic interference at this time of day, but my WiFi connects to router much faster than before.
PS: Here is a baseband file only - DOWNLOAD (for ODIN, 19Mb). Made by SHiFT!.
Click to expand...
Click to collapse
And TW 4 ?! its buggy ??????

SGS+_User said:
And TW 4 ?! its buggy ??????
Click to expand...
Click to collapse
I flashed only baseband. Didn't want to risk flashing full firmware because Samsung-Updates dot com says that it is for Vodafone (may be locked).

apkfox said:
I flashed only baseband. Didn't want to risk flashing full firmware because Samsung-Updates dot com says that it is for Vodafone (may be locked).
Click to expand...
Click to collapse
I dont understand What do you mean with locked ?

SGS+_User said:
I dont understand What do you mean with locked ?
Click to expand...
Click to collapse
I mean that there is a chance that it works only with Vodafone service provider.

Lol why don't they release new base bands only, no one uses their stock roms anymore always including bugged tw4.. gz samsung

broodplank1337 said:
Lol why don't they release new base bands only, no one uses their stock roms anymore always including bugged tw4.. gz samsung
Click to expand...
Click to collapse
I still use XXKQE
Sent from my GT-I9001 using xda app-developers app

broodplank1337 said:
Lol why don't they release new base bands only, no one uses their stock roms anymore always including bugged tw4.. gz samsung
Click to expand...
Click to collapse
"Go Home Samsung, You're Drunk"

broodplank1337 said:
Lol why don't they release new base bands only, no one uses their stock roms anymore always including bugged tw4.. gz samsung
Click to expand...
Click to collapse
i still use stock rom because with jb i have to turn my 3G off to have good battery.....

mrjraider said:
"Go Home Samsung, You're Drunk"
Click to expand...
Click to collapse
Sent from my GT-I9001 using xda app-developers app

Made by me. I could not write here today. After checking all is well. Thx, apkfox

https://play.google.com/store/apps/details?id=eu.chainfire.mobileodin.pro
Can i use this to flash it? And is it safe to flash basebamds om jellybean?
Sent from my GT-i9001 using xda app-developers app

rickvrolings said:
https://play.google.com/store/apps/details?id=eu.chainfire.mobileodin.pro
Can i use this to flash it? And is it safe to flash basebamds om jellybean?
Sent from my GT-i9001 using xda app-developers app
Click to expand...
Click to collapse
Look in the supported device list, i9001 is not supported!

I have aospjb from brood with bqkq3 modem, is this modem better for belgium?
i'm happy with this but when i have edge my connection is good but on 3g/h i only have one block or none.
maybe interesting for those who knew it ,i m on mobile vikings (provider).
Thx

apkfox said:
Testing it for about ~1h.
Network signal is better than on KPL.
Battery drain - still 99%, as it was before I flashed it.
I'm not sure if it is because of new baseband or just because of lower electromagnetic interference at this time of day, but my WiFi connects to router much faster than before.
PS: Here is a baseband file only - DOWNLOAD (for ODIN, 19Mb). Made by SHiFT!.
Click to expand...
Click to collapse
And what is your experience with the new baseband (KP7) until now ?
Still battery drain low and connection well ?

Hey i made a CWM flashable .zip for this stock ROM!
It is still odexed and everything, just as you would flash it with Odin!
https://hotfile.com/dl/189150627/92da9a4/GT-I9001_signed_011513_150702.zip.html

HELP Changed ROM now touchscreen not working

HELP!! I rooted and flashed my HTC One XL with CyanogenMod 10 and no matter what ROM i put on my screen is not responding at all. The power and volume buttons are working but thats all Please help!!
Kind Regards
Peter

Its problem with your kernel
Please use other kernel suppported with your phone
Flaash via cwm
Sent from my phone using xda app-developers app

sembre said:
Its problem with your kernel
Please use other kernel suppported with your phone
Flaash via cwm
Sent from my phone using xda app-developers app
Click to expand...
Click to collapse
This might seem like a dumb question, if so i appoligise but how to i find a kernel supported for my phone?

May be this rom will worked on your phone
http://forum.xda-developers.com/showthread.php?t=2076361

sembre said:
May be this rom will worked on your phone
http://forum.xda-developers.com/showthread.php?t=2076361
Click to expand...
Click to collapse
and that it did, just flashed it and seems to be working well. so far so good. Thank YOU!!

Do not just say thanks but hit thanks button
Sent from my GT-S5360 using xda app-developers app

marzi85 said:
and that it did, just flashed it and seems to be working well. so far so good. Thank YOU!!
Click to expand...
Click to collapse
This is a known bug. If you're on the newest firmware, you can only use Sense JB roms. Anything else, the touchscreen will not work.

[Q] camera not working on synergy rom r484 verizon galaxy s3

Well ive flashed over and over again. i have a completely unlocked bootloader and recovery. synergy rom just doesnt to want to work completely on my phone. i thought maybe my download was bad so i downloaded again from my phone and that didnt work. either. once i select all my options from the installer from synergy it fails on ziggy kernel. is says values not updated and but still gives me kernel install ok. tried it with the stock kernel too and that installs just fine but camera still fails. thats pretty much the only problem im having and i cant seam to find an answer anywhere so thats why i posted. i know most people arent worried about the camera but i got a baby girl and i take a lot of pics lol please any help

I'm having similar problems. If you find a fix please let me know. Will do the same.
vitokes said:
Well ive flashed over and over again. i have a completely unlocked bootloader and recovery. synergy rom just doesnt to want to work completely on my phone. i thought maybe my download was bad so i downloaded again from my phone and that didnt work. either. once i select all my options from the installer from synergy it fails on ziggy kernel. is says values not updated and but still gives me kernel install ok. tried it with the stock kernel too and that installs just fine but camera still fails. thats pretty much the only problem im having and i cant seam to find an answer anywhere so thats why i posted. i know most people arent worried about the camera but i got a baby girl and i take a lot of pics lol please any help
Click to expand...
Click to collapse

Baseband version?
Sent from my SCH-I535 using Tapatalk 4 Beta

Addiso said:
Baseband version?
Sent from my SCH-I535 using Tapatalk 4 Beta
Click to expand...
Click to collapse
of what my stock rom or the synergy rom?
cause my stock rom is baseband I535VRBMF1

Need to flash a different kernel. I use KT747
Sent from my SCH-I535 using xda app-developers app

sjpritch25 said:
Need to flash a different kernel. I use KT747
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
ive tried searching for this kernel. do you by any chance have a link?
or any other kernels available

vitokes said:
ive tried searching for this kernel. do you by any chance have a link?
or any other kernels available
Click to expand...
Click to collapse
nevermind i found it i will post results

deputyvanhalen said:
I'm having similar problems. If you find a fix please let me know. Will do the same.
Click to expand...
Click to collapse
hey kt747 kernel worked. it fixed the camera and now its running perfectly good. try that way

can you link me to the kernel you downloaded? I've found one but it says it's for AT&T and I'm on big red (verizon)
vitokes said:
hey kt747 kernel worked. it fixed the camera and now its running perfectly good. try that way
Click to expand...
Click to collapse

deputyvanhalen said:
can you link me to the kernel you downloaded? I've found one but it says it's for AT&T and I'm on big red (verizon)
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=41733434
that should be it if not just copy paste it. its a little down the line and it has all 4 carriers.
big red is in green and make sure you get the touchwiz JB 4.1.1 and 4.1.2 download
install:
1) flash your rom and get it started
2) Back to recovery and flash KT747
3) After it install stay in recovery and wipe dalvik and cache
4) Fix Permissions
all of this at the same time you flash kt747
hope it works

Flash any kernel that has been updated to md3 source and up, just so you aren't just left with Ktoonsez as your only option, Lean kernel also works.
Sent from my SCH-I535 using Tapatalk 4 Beta

Thanks, i'm running cm 7/16 nightly. Flashed the ktoonsez aosp kernel and still camera can't connect. Idk why this won't work on my phone.
Addiso said:
Flash any kernel that has been updated to md3 source and up, just so you aren't just left with Ktoonsez as your only option, Lean kernel also works.
Sent from my SCH-I535 using Tapatalk 4 Beta
Click to expand...
Click to collapse