I had baseband firmware & imei Unkown issue, after loading the rom (Gingerbread 2.3.4 T959VUVKG4 ) via ODIN,
Then I guessed there should be a issue with the modem, then flashed different different modems via ODIN (ki1.tar.md5 / kh2.tar.md5 & etc) nothing worked for me...
then after reading a thread I tried above modem (kh2.tar.md5) + "T959VUVKG4" pit file combined via ODIN. phone went off never turned back...but now i could connect the device using following method:-
1. removing battery
2. plug cable + volup + down
3. plug battery
then it shows to DOWNLOADING MODE
however my PC doesnt recognize the USB driver it shows as UNKNOWN DEVICE in under Device Manager in my PC. I tried even reinstalling the Samsung USB driver no luck
any chance that i could get my phones life back ?
good news, i changed the cable then changed to another PC. then USB recognized via ODIN, I culd flash everything sucessfully
but the hard part is,,, i still have the UNKNOWN baseband & Imie issues, can someone instruct me what to do ?
read this may help.http://forum.xda-developers.com/showthread.php?t=1223765
I too have the same problem since this morning. I have Tmobile Samsung Galaxt 4G SGT959V and after rooting and downloading kernel files, it was only going to the T Mobile logo. Last night I was bale to get into the download mode and then I started downloading Gingerbread. Now my phone is not powering up. I called up samsung and as it under warranty, they are ready to fix. My problem is they will find out what I was doing and this might breach some samsung regulation. not sure???
I would like to know what should I do for getting my phone power on or in download mode. I have tried all the above mentioned steps, but it just not works. Duh!!
Please someone help!!
Rooting phone voids warrenty. Turn Odin on and then hold volume up and volume down at the same time and while doing that plug in your USB cable to get into download mode. Even if nothing shows on the phone Odin may still recognize it. Try it a few times if the first attempt don't work.
Sent from my SGH-T959V using xda premium
I tried doing this several times. But Odin dont recognize nor does my phone powers on. Do you think it drain the battery while rooting and downloading?
Try removing the battery first then, hold volume button up and down simultaneously then plug your USB cable its recommended you have Odin up and ready while your doing this. Make sure your battery is charged before you for any of this! Good luck ;-)
Sent from my SGH-T959V using xda premium
Phone isnt powering on... I dont even see battery icon when hooked to charger.
Your phone may be hard bricked as in dead and lifeless. Im not sure if Samsung will be able to tell if your phone was flashed because its dead.Samsung slaves usually use different battery and usb to see if phone turns on,if it doesn't they then inspect phone for physical damage and then they send you a refurbished one. T-mobile are a bunch of noobs they wouldn't know anything so push for a new phone with them. Could you please explain exactly what you did? My guess is odin flashing with wrong firmwares or kernels.
hi
i had the same hard brick problem as above but for me it was weird. all i wanted at the time was to get rid of the bloat where and i did after which i unrooted and the phone worked fine. the weird thing is later i went in to download mode by accident and before i could do anything the phone was bricked. tmobile replaced My phone but if this has happened to anyone else please reply
jermrz said:
i had the same hard brick problem as above but for me it was weird. all i wanted at the time was to get rid of the bloat where and i did after which i unrooted and the phone worked fine. the weird thing is later i went in to download mode by accident and before i could do anything the phone was bricked. tmobile replaced My phone but if this has happened to anyone else please reply
Click to expand...
Click to collapse
you literally copied and pasted from one thread to another....
Sorry I had no idea if anyone would answer
Sent from my SGH-T959V using XDA App
Related
I tried to install an update on my Galaxy S 4G to my Gingerbread theme on KD1 and I can't get past the original boot screen.....is there any way to boot into CWM? I installed it, except i can't seem to boot into recovery.
Any ideas?
I'd like to use ODIN as a last resort (and yes, download mode does work.)
If it doesn't boot pass the Samsung screen then you'll have to use Odin to fix. I had a similar issue this week with thay
Sent from my SGH-T959V using XDA App
I have the same issue but mine is a little more severe. I don't even get a boot screen. Nothing displays. I tried doing many variations to get into download mode but I cannot. So I'm stuck with a blank screen Odin doesn't recognize it my computer doesn't even recognize it. Please Help!!!
pepuhz said:
I have the same issue but mine is a little more severe. I don't even get a boot screen. Nothing displays. I tried doing many variations to get into download mode but I cannot. So I'm stuck with a blank screen Odin doesn't recognize it my computer doesn't even recognize it. Please Help!!!
Click to expand...
Click to collapse
Pull out your battery. With your phone unplugged put your battery in but leave it powered off.
Plug your phones cord in your PC. Just the cord not the phone.
Now hold just the volume up and down buttons. While holding the buttons in plug that cord from your PC into your phone. You will see a yellow triangle or if your firmware is messed a symbol with a small phone and a computer. You can use Odin either way. You will see Odin recognize the phone if its done correct and you have the Samsung usb drivers installed.
Sent from my SGH-T959V using XDA Premium App
I know I have to be doing something wrong. I have read everything everywhere and have a Samsung Galaxy S 4G & Vibrant 3G T959 BOTH stuck in recovery. Haven't touched them in about a week buttons just checked & still they go through the load to the TMO chime then black or I can get to download & recovery but have mounting issues. The Vibrant was rooted & SGS lost root when flashing joedevelopers rom (placing no blame on thread just providing information for possible help).
I read somewhere yesterday about using NVFash or SuperOneClick to get it going but each search leads me to instructions for other devices. I don't want brick either phone using the wrong files so I'm pretty much stuck.
Would appreciate instructions if anyone has the answer. I really have tried everything. The SGS was stuck at the phone ! computer screen shot first but the reloading the drivers and piecing together some code brought it back & now the SD card is not ready.
Sent from my Bionix 2 - A TeamWhiskey Production using XDA Premium App
ok so cant even get into dl mode its stuck at the screen with the phone exclamation point and computer ...... its is still read in odin on com port but it hangs at factoryrfs ...any help will be greatly appreciated i just bought this phone today thanks
Happens, that screen is another version of download mode. Just keep trying to odin it back to stock. It will work.
Sent from my SGH-I997 using XDA App
Alright here you go. Pull battery insert USB cable and battery while holding both volume buttons will bring up download mode then do your thing.
Sent from my SAMSUNG-SGH-I997 using XDA App
I had this same problem yesterday. If your computer detects your phone but not ODIN go to your device manager, click on samsung composite USB device and go to driver details and click update driver(via internet) it should update them and ODIN SHOULD detect it. Good luck
I had this problem yesterday trying to flash to stock. The first time I tried it said FAILED in odin. When I rebooted phone got the cartoon phone and computer icon. I just tried the same thing again and it worked. I don't know what happened either.
In my experience using a different USB cable than what Samsung supplies or having a flaky USB port can cause hit or miss Odin flashes.
I don't think it is possible to brick this phone from flashing. I've done pretty much everything you can possibly do wrong and both of mine still work fine and dandy.
It is possible to be in Download mode and never have anything even come up on the screen. If you are uncertain, listen for the sound your computer makes when you plug in a USB device or watch your device manager. Even if you don't have the driver installed something will most likely show up.
Hi Experts,
This month, I updated my galaxy s 4g to Onecosmic's ICS rom from Gb KI1(rooted) by using installation mod from sd card. Couple of min later, my phone was go into boot loop. Only display googl and samsung logo togglely. So, I tried to recover a phone from this sitution but phone does not go into recovery mod anymore. Only can go into download mod. So I want to return GB again by using Odin with GB rom.
This is stupid thing what I've done. After this my phone is totally dead. Current situtions are like these.
1. USB bricked. My computer does not recognize phone anymore.
2. Power button does not work - This means, I can't power on anymore.
3. Impossible to caharge battery. I was using both of the wall charger and via usb cable but not charging-battery charge indicator not appear.
I thing I messed up rom software. Is there any expert can help me out of this situation?
I would highly appreciate if someone could help me.
There is no ics for the sgs4g. I believe what you flashed is a vibrant rom. Completely different phone. This is why you're bricked, or at least semi bricked right now.
As for fixing it, it's going to be quite hard, if possible at all, from the sounds of it...
Sent from my SGH-T959V using XDA App
If you flashed from your device it is recoverable. Before proceeding Please pull your battery, locate your model number and post it.
That's a haven's sound!!!
This is a haven's sound!!! Thank you Bassmanjames.
my phone's carrier is t-mobile. Model is SGS 4g t959v. From the back of phone is SGH T959V. I wish you save me.
For next time(and for the benefit of all new users that will read this while searching for other things) - Please read This phone is NOT the Vibrant or any other Galaxy- it's the Galaxy S 4G.
Try to get into download mode - here is a guide.
if you succeed - there is hope.
Not work
Thanks Alon2. Now I fully understand about my phone. This is different with any other Galaxy. O.K, but you are not fully understand my situation. My phone is dead. This means I can't get a active screen. So, I don't know my phone is go into download mode or not. Only I do know is, if I connect usb cable to my phone, my computer makes a error sound. This means, usb connection is bricked. if a computer recognize a phone, I can use odin or other program to reinstall the os.
Thank you.
snapper1 said:
Thanks Alon2. Now I fully understand about my phone. This is different with any other Galaxy. O.K, but you are not fully understand my situation. My phone is dead. This means I can't get a active screen. So, I don't know my phone is go into download mode or not. Only I do know is, if I connect usb cable to my phone, my computer makes a error sound. This means, usb connection is bricked. if a computer recognize a phone, I can use odin or other program to reinstall the os.
Thank you.
Click to expand...
Click to collapse
I don't understand - did you try to get into download mode or not?
alon2 said:
I don't understand - did you try to get into download mode or not?
Click to expand...
Click to collapse
He's said that he can't get any screen, not recovery, or dl.. Anything
Sent from my SGH-T959V using XDA App
tehgyb said:
He's said that he can't get any screen, not recovery, or dl.. Anything
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
I thought he didn't event try...well if that's not working I have no other recommendations
alon2 said:
I thought he didn't event try...well if that's not working I have no other recommendations
Click to expand...
Click to collapse
Ooh wait just re read op, he said he can't get into recovery but can get into dl mode.
If you can get into dl mode try to odin something else. If your computer won't sense the phone try using different usb ports. If you absolutely can't get it to read, try to odin or heimdall anyway without. I've gotten it to work before.
Sent from my SGH-T959V using XDA App
Thank guys,
There's a little bit confusion with the situation what I have. So I need to re-describe it.
1. Phone dead means I can't make power the phone on. Even I press power button several times, phone does not response. I don't know why. I read some articles, that said phone met certain situation, it drains battery power very quickly-even not at all.
2.So I replace the battery which is good working with other phone, still I can not power the phone on. ---screen is black.
3. Connect the usb cable to phone, My computer does not recognize a phone. Computer said, usb device error. I re-installed samsung usb driver to computer, same thing happen. IF phone is able to connect computer, I can use odin and do some thing. This means internal USB connection driver(may be) is damaged, I think.
4. SO, WITHOUT POWER & SCREEN & NO CONNECTION TO COMPUTER, I can not do any thing.
There is some article which describer how to recover bricked phone's usb connection, but that's for the HTC desire not for SGS.
snapper1 said:
Thank guys,
There's a little bit confusion with the situation what I have. So I need to re-describe it.
1. Phone dead means I can't make power the phone on. Even I press power button several times, phone does not response. I don't know why. I read some articles, that said phone met certain situation, it drains battery power very quickly-even not at all.
2.So I replace the battery which is good working with other phone, still I can not power the phone on. ---screen is black.
3. Connect the usb cable to phone, My computer does not recognize a phone. Computer said, usb device error. I re-installed samsung usb driver to computer, same thing happen. IF phone is able to connect computer, I can use odin and do some thing. This means internal USB connection driver(may be) is damaged, I think.
4. SO, WITHOUT POWER & SCREEN & NO CONNECTION TO COMPUTER, I can not do any thing.
There is some article which describer how to recover bricked phone's usb connection, but that's for the HTC desire not for SGS.
Click to expand...
Click to collapse
Like i said the issue is that you flashed a rom for the wrong phone, is not a battery issue. We need to find a way to hook your phone to the computer, or to perform the unbrickable mod, search it.
Sent from my SGH-T959V using XDA App
Screw Odin, uninstall that crap and use heimdall.
I flashed a Jellybean touchwiz rom for Verizon GS3, and went to reboot and now nothing, zero zip nada. No charging led light, no way to get into recovery and no response.
Anything I can do?
what happens when you do vol up + home+power button?
Absolutely nothing. I tried to get back into the recovery to see if I could restore my backup and nope.
did you try leave it pluged in for 30mins ?
does it vibrate once when you try to turn it on?
No vibrating and no sign of life at all. Even when plugged into my computer, I was going to try the unbrick guide but it listed that I should be able to get into the recovery still.
NickTheMajin said:
No vibrating and no sign of life at all. Even when plugged into my computer, I was going to try the unbrick guide but it listed that I should be able to get into the recovery still.
Click to expand...
Click to collapse
leave it plugged in for a while to make sure its not drained battery
do you have a usb jig?
I don't have a USB jig but this is possibly good news. I removed the battery and SD card and plugged it into my computer and it tried to install drivers (failed but tried) and the led light comes on red.
if your gettin led now you more then likely need to let it charge
It doesn't give me the led with the battery in
Plug it into a wall charger for at least 30 or even better if you can get a battery from someone.
Sent from my sexy white Eclipsed galaxy S3
I think its gone still nothing.
red led means qualcomm download mode. sounds dead to me
Yeah, haha. I saw it and mentally prepared myself for it. Literally just got the phone today so Verizon had no qualms with just sending me a new phone. Guess I'm reactivating my Rezound in the meantime. Thanks for the help guys.
you know
I am surprised. That also happened to me the first time i flashed that very same rom (touchwiz) with twrp . I have done this so many times , i literarily can flash a rom on the way to work .
I was in shock , i still dont know how the heck can i flash a rom and brick .
I plugged mine into windows and i got the device manager driver error from hell . and my phone never came back up again
I stayed away form twrp and touchwiz and i still cant possibly comprehend how a simple rom flash can brick my phone .
Which ROM did you flash?
Sent from my SCH-I535 using xda premium
you could probably send it to get Jtag'ed for around $60 if your warranty is invalid (ie used device)
You just hard bricked it. I did the same thing. Check here - post 5 shows the same symptoms :http://forum.xda-developers.com/showthread.php?t=1770341
And here: http://forum.xda-developers.com/showthread.php?t=1791721
I was pushing a copy of root66 that I hadn't md5'd. Took a JTAG to bring me back (twice) .
Sent from my SCH-I535 using xda app-developers app
So, in the future, md5 checksum absolutely everything since I'm assuming now that that is why this happened? (Since I made doubly sure I was flashing a rom for my phone).
If you still have the file you downloaded, you can check it. That would answer that question. If it checks out fine, then we have to look elsewhere for the problem.
BTW, MobileTechVideos.com can bring you back - based on my experience with them, I highly recommend.
Sent from my SCH-I535 using xda app-developers app
Please share exactly what you did so others can benefit from your unfortunate experience.
What ROM did you flash?
Did you use ODIN or a recovery?
If recovery, which one - CWM or TWRP?
Was there any unusual condition you can think of ... low battery, USB connected to computer or to charger, etc?
I upgraded from Beanstalk to CM 11. I lost my IMIE after the flash. I used odin to return back to stock, then checked and the IMIE was back. Up graded that to Vahilla Rom, and the IMIE was still there. I went back to Beanstalk, and lost the IMIE again! Used Odin to return to stock, the phone booted up just fine, the IMIE was back. Went to power up in Recovery to flash Vahilla Rom again, and the phone would not power up. Removed the battery, held power button in for a few seconds, put battery back in, still no power up. Plugged phone in to computer, the computer comes up with "Unreconized USB" but will not load drivers. Phone still does not turn on. Left battery out for awhile(an hour) still no power. The battery had 80% before I started all of this! Sorry this is so long I wanted you to know every step I took. I'm at a loss of what to do now. Any suggestions? I am on the SGS4G.
Does heimdall/odin see the onions when connected?
champ1919 said:
Does heimdall/odin see the onions when connected?
Click to expand...
Click to collapse
No. it didn't, but I have recently corrected it, flashed CM 11 successfully, and we are back in service. Micro USB jig saved the day!
SD card debrick files needed for SGH-T959V Plz!
champ1919 said:
Does heimdall/odin see the onions when connected?
Click to expand...
Click to collapse
So i have flashed SGH-T959 to my SGH-T959V. Hard bricked with no response even with USB Jig.
I have seen success stories with other galaxy users debricking their phones with SD cards without any need for J-tag.
See the links below to furthur understand my request for a SGH-T959V owner to "export" necessary unbricking files.
Galaxy S3
Note 3
Galaxy S2
Anyone(developer or not) with the SGH-T959V PLEASE PLEASE PLEASE take a little time to create this image so me and others with hard bricked devices may have some hope of unbricking our hard bricked devices without having to resort to J-tag?
adrianhall06 said:
So i have flashed SGH-T959 to my SGH-T959V. Hard bricked with no response even with USB Jig.
I have seen success stories with other galaxy users debricking their phones with SD cards without any need for J-tag.
See the links below to furthur understand my request for a SGH-T959V owner to "export" necessary unbricking files.
Galaxy S3
Note 3
Galaxy S2
Anyone(developer or not) with the SGH-T959V PLEASE PLEASE PLEASE take a little time to create this image so me and others with hard bricked devices may have some hope of unbricking our hard bricked devices without having to resort to J-tag?
Click to expand...
Click to collapse
Nope, and nope.
Move along, nothing to see here
Help!
Hi everyone,
I need help. I have a Samsung galaxy s 4g (SGH-T959V) T-Mobile, while flashing clockworkmod through Odin v3.07 on it, I messed up with it. It has gone on an emergency mode, all I see on it is "mobile exclamation mark computer sign' on it. It doesn't go on download mode anymore, I tried pulling the battery out, pressing volume down and power button, volume down, up and power button. Nothing works, it always ends up on 'emergency mode'.
Please assist me to restore it back. Much appreciated.
That screen that you see may be an alternative download screen/mode. Does Odin connect? Yellow block lite? If so, flash away
Sent from my SAMSUNG-SM-G870A using XDA Free mobile app