Database Info

Boot Animation with SkyRaider

Sorry about the post but I cannot find the post were it tells me how to install custom boot animations. I also need to be able to do the sounds. As far as I understand I have to put it in the media folder. I found the original one but it does not allow me to move it. I'm assuming I have to do it from recovery but I don't know how. Detailed instructions would be appreciated. I have a cold and the old brain is doing so well. Thanks

s-off your dinc and you can do it while booted

I was trying to avoid that because they do not have a way to undo s-off yet. Just incase my phone dies I dont want verizon to say I voided the warranty. Any way to do it without?

You can flash some of them from rom manager...that's how I did mine.

If you have rooted your phone, which you must have in order to install a custom ROM, you've already voided your warranty.
Adding S-OFF wouldn't change anything in the eyes of Verizon, and you can always drop your phone until it's physically broken if you need to take it in.

rom manager -> download rom -> Ihtfp69 -> boot animations -> download -> pick one
thats where i got mine from

MMBosstones86 said:
rom manager -> download rom -> Ihtfp69 -> boot animations -> download -> pick one
thats where i got mine from
Click to expand...
Click to collapse
When I try to install from Rom manager it doesn't load it says verification failed or something. Does anyone know how to manually install Droid 2 boot screen.
HTC incredible
SR sense 2. 5. 2
Radio 2. 15
Sent from my ADR6300 using XDA App

Did mine 'manually', since I'm rooted I have clockwork mod installed.
1. Boot into recovery (clockwork mod)
2. launched android SDK adb daemon
3. moved file from 'tools' folder of sdk to the proper destination on the phone.
4. Done.

Doctor Butts said:
Did mine 'manually', since I'm rooted I have clockwork mod installed.
1. Boot into recovery (clockwork mod)
2. launched android SDK adb daemon
3. moved file from 'tools' folder of sdk to the proper destination on the phone.
4. Done.
Click to expand...
Click to collapse
I'm not sure how to do step 2 your referring to. If you have a link to a thread that explains how to do that, it would be greatly appreciated.
Sent from my ADR6300 using XDA App

Well, you have to go to the android website and download the android SDK. Install it somewhere on your computer that's easy to access, preferably put the folder at the root of one of your hard drives.
You'll go into command prompt after that to do a lot of the work to transfer files.
So, make sure USB debugging is enabled (just in case) and boot your phone into cwm recovery. Connect the phone to your computer via USB.
in command prompt, cd to the android sdk's tools directory. From there, you can use the adb commands to transfer files.
So, for me, after connecting the phone I do the following in command prompt:
cd G:
cd androidsdk/tools
and then I use ADB to communicate with phone, first by verifying the phone is connected:
adb devices
(if adb is on your pc, it will auto run the daemon if it is not running)
If your phone shows up in recovery mode, you're set.
You may need to go into cwm and mount your system/sd card before transferring the file.
From there, you use adb shell to acess the phone's file systems.
If you put the boot animation to the phone you'll do something like (while in shell) mv bootanimation.zip system/somethingorother/bootanimation.zip
But don't take the above line as gospel. I dont remember the exact command line to use. Check the thread on "How 2 - ADB, Rooting...." for a list of commands in ADB shell and search for a webpage that gives basic linux commands.

Doctor Butts said:
Well, you have to go to the android website and download the android SDK. Install it somewhere on your computer that's easy to access, preferably put the folder at the root of one of your hard drives.
You'll go into command prompt after that to do a lot of the work to transfer files.
So, make sure USB debugging is enabled (just in case) and boot your phone into cwm recovery. Connect the phone to your computer via USB.
in command prompt, cd to the android sdk's tools directory. From there, you can use the adb commands to transfer files.
So, for me, after connecting the phone I do the following in command prompt:
cd G:
cd androidsdk/tools
and then I use ADB to communicate with phone, first by verifying the phone is connected:
adb devices
(if adb is on your pc, it will auto run the daemon if it is not running)
If your phone shows up in recovery mode, you're set.
You may need to go into cwm and mount your system/sd card before transferring the file.
From there, you use adb shell to acess the phone's file systems.
If you put the boot animation to the phone you'll do something like (while in shell) mv bootanimation.zip system/somethingorother/bootanimation.zip
But don't take the above line as gospel. I dont remember the exact command line to use. Check the thread on "How 2 - ADB, Rooting...." for a list of commands in ADB shell and search for a webpage that gives basic linux commands.
Click to expand...
Click to collapse
THANK YOU SIR. MUCH APPRECIATED.
Sent from my ADR6300 using XDA App

adb help for noob

I posted this in another thread but got no response, this thread (http://forum.xda-developers.com/showthread.php?t=502010&page=35)
maybe a new thread will help.
So this is my first venture into the whole ABD thing. I am trying to install the framework mod from Tazz for the HTC music player (as listed here: http://forum.xda-developers.com/show...5594&page=1277 post 12768).
Tazz mentions to “push this http://www.multiupload.com/1WWHXAUN6W
to system/ect/permissions then download and install htc music”
So, running my trusty Win7 machine I downloaded the SDK from the android development site, inserted the correct line in the path and viola, I can enter the CMD prompt and run the adb command successfully. Adb and adb shell both seem to work.
I followed the instructions from here: http://androidforums.com/developer-1...-commands.html and here: http://forum.xda-developers.com/showthread.php?t=502010 for the install.
My problem comes in when I try to push the file to the phone.
Fisrt dumb question is: what phone mode should I be in when running the adb? Standard running mode or booted to recovery? (I thought I read something about being in recovery but at that point it was all a blur).
I have the USB Debugging turned on so I think I am ok there.
I installed the SDK to my C:\Android directory.
I saved Tazz’s file to my C:\Android\Tools directory.
Here is my cmd text (maybe this is where I went wrong):
In the cmd window I CD’d to the C:\Android\Tools directory
adb push com.framework.htc.xml system/ect/permissions
After making sure that I was in the correct dir and all files were also located in the correct dir I am still getting an error, file or directory not found, or something like that.
Sorry for the long post. I figured this would be a good first step (my first adb experience) as it seems pretty benign in terms of me bricking anything but offering a good learning opportunity.
I am running a rooted Eris (KaosFroyo v36).
In looking things thru maybe I need a USB driver for the Eris?
any help is appreciated,
oh, my cmd prompt looks like sh-2# (or something like that)
Thanks

While it may be that you still need to download the appropriate drivers, it seems you are able to get root access so, this is likely not the case.
There are two things which stand out as potential issues in the steps you described. Fortunately, both are super easy.
First and foremost, make sure you have mounted the phone as "read-write."After you have cd'd to the tools folder type "adb remount" (without the quotes) and press enter. If successful, it should respond with "remount succeeded." Congrats, you have now mounted the phone as read-write.
Next, I see errors with your command. There should be a "/" before "system" and it should be "etc" not "ect." Specifically, your command should be:
adb push com.framework.htc.xml /system/etc/permissions/
[The above command of course, assumes that the name of the file you are pushing is indeed named "com.framework.htc.xml" and is in your tools folder.] You'll know it worked if the response in your command prompt indicates the speed and time it took for the push to take. For example, "1234kbps in 3.4 seconds". If you see something resembling that you should be all set. At this point you can reboot your phone and your changes should be in effect. Either unplug and reboot manually or just type "adb reboot" (without the quotes) and press enter.
In regard to your question about whether the phone can be in standard running mode or recovery... It depends on the level of root of the phone but, fully rooted and nand unlocked phones can be adb'd while in standard running mode. My EVO can and it is very likely your Eris can too.

I see
thanks OK.
typo's aside in the thread, my command was missing the / as you have described it. I also did not know about the remount thing. In my reading I thought that was just for the sd card. I will try and put all the pieces together when I get home tonight.
You are correct in that is the name of the file and I do have it in the /tools directory.
Thanks for the help, baby steps (I am learning)

No problem. We are/were all noobs at one point in our lives.
The term "mounting" has slightly different contextual meanings which can be confusing. First off, the /system/ folder is already "mounted" while using adb, however, it is mounted as read-only. So, if you are ever trying to push something to the phone and get an error back that says "mounted as read-only" you'll now know what went wrong. Simply type "adb remount"
and it puts the /system/ folder into read-write mode.
Bear in mind that upon phone reboot the /system/ folder automatically remounts into read-only mode so if you reboot and try to push another file you'll need to remember to "adb remount" again.
With regard to the sdcard "mounting" refers to whether the phone (sdcard) is mounted as a disk drive on your computer. You'll find that if this is the case many adb commands won't work because the sdcard can't be accessed by the phone while mounted on the computer. Therefore, always remember to connect your phone as "Charge Only" when adb'ing.

got it
That did the trick, worked like a charm. Thanks for the help and pointers. I have now pushed my first file...yeah for me!!
Thanks for your help and time.

glad your push worked
I am still trying to get SDK/ADB to connect to my Milestone XT720 phone. Have no idea of why they won't. Have tried all the usual suspects but nothing as of yet. NEED HELP!

Trouble using ADB with windows

I was able.to get the command prompt up but when I run adb devices it just gives the error "adb is not recgonized as an internal or external command, operatable program or batch file. I loaded.the drivers and changed the PATH, but its like its not connecting. I have a Motorola Atrix. I even installed PdaNet in case it was the drivers but that didn't work either. Iam a noob to android and have never used adb. Any help would be great. Thanks.
Sent from my MB860 using XDA App

I believe that after you change the PATH you need to either reboot the computer or maybe just log out and back in to make that change. Are you sure what you added into the PATH is pointed to the directory where adb resides (android-sdk-windows/platform-tools?) ?

[Q] Windows will not install drivers for tf101

I have a B90 TF101 and I am able to get into recovery mode. I have no ROM on my internal SD card and have wiped and formatted everything. I have read that it is possible to push a file using ADB while in recovery.
However I am not able to see my device when I use the adb devices command. I noticed that the drivers for the transformer are not installed. So I tried to install them and it tells me that windows can't install. I am pointing the installer to the MTP devices driver folder.
How do I get the drivers to work so I can use ADB or can I set up ADB in Linux and not have to worry about the drivers?
edit: I forgot to mention I am running windows vista.

Hi! Search in transformer's support page, you can find the drivers there

Are you saying that the drivers in the MTP folder are not the right ones? I got them right from Asus' website. Which drivers should I be using?

Ageesaman, did you ever get the drivers working? I had the exact same problem (got adb working as far as listing devices, but then it returned with a blank line after "adb devices" in cmd window). I downloaded the ASUS site's USB drivers download as well as every other utility from that site; I also tried external sources; finally, I tried manually updating by pointing to the unzipped MTP folder - nothing worked. I used both 64 and 32 bit Windows 7 machines. I am stuck in the cwm recovery loop so I can't do much troubleshooting. I tried searching dozens of sites for several hours but came up short.
Thanks in advance for any help offered.

Unfortunately I have not found a solution to getting the drivers installed. I was hoping someone would be able to confirm/deny if I can do this in Linux without the drivers before going through with setting it up. However that will be my next step as soon as I have the time to do it.

Ageesaman,
Unfortunately I know nothing about Linux, but what finally got it working for me was starting the installation of PDANet for Android. I saw it look for and install the driver, then I got a ADB confirmation. I then canceled the PDANet install. If you decide to go this route and get error messages in the cmd window, retry "adb devices" up to 3 times. In the meantime, I hope you get your Linux answer. Good luck.

I will give that a try. Is PDAnet something from Asus? I will do a search and see if I can find it.

ageesaman said:
Unfortunately I have not found a solution to getting the drivers installed. I was hoping someone would be able to confirm/deny if I can do this in Linux without the drivers before going through with setting it up. However that will be my next step as soon as I have the time to do it.
Click to expand...
Click to collapse
Yes, I can confirm the TF101 works with ADB without drivers on Ubuntu linux [I am on 11.04]. The current [stable, with 12.04 betas] Ubuntu version is 11.10, and you can download it to a live CD and run it off the CD without installing it.
I just got my tf101 the other day and I tried using adb [and older version], and it did not show up. Then I downloaded the tf101 root.zip file, and tried the adb within that folder, and it worked.
I've uploaded it to mediafire:
adb-1.0.29 http://www.mediafire.com/?hqwxbljs2gbpfxe
md5 64c4afbab6d2f769ddbb229f0247cf8a
update: newest adb is 1.0.31 http://www.mediafire.com/download.php?vcvc4dxkdd57695
md5 ed5c8f9a221cae0cb24d6cdc8b76d396
download, and run
chmod +x ./adb-1.0.29
to make it executable

That worked! I can now connect to my device with ADB. Thanks for that pdanet advice.
Now I just need to figure out how to push the file. Can't seem to get it to work. Here is what I am typing in the cmd line.
adb push rom.zip /sdcard
The rom I am trying to push is in the Platform tools folder that I am using to access adb. Does anybody know what I am doing wrong? Any help would be awesome.

is the rom.zip in the same directory as you are in (cd <path>)?
What does it say when you try to transfer it?
You can also try to push it to the full path (/mnt/sdcard/)

The first issue I had was that Asus sync was on and causing problems. As soon as I shut that off ADB started to work and act normal.
The file is in the same path.
When I try the transfer it looks like it finishes and it just tells me the file size. It actually seems like it works I just can't find the file when it is finished. I tried rebooting recovery but it seems like the file is just not there.
I will try the /mnt/sdcard/ and see if that works.

ageesaman said:
The first issue I had was that Asus sync was on and causing problems. As soon as I shut that off ADB started to work and act normal.
The file is in the same path.
When I try the transfer it looks like it finishes and it just tells me the file size. It actually seems like it works I just can't find the file when it is finished. I tried rebooting recovery but it seems like the file is just not there.
I will try the /mnt/sdcard/ and see if that works.
Click to expand...
Click to collapse
It's probably because /sdcard is a soft link to /mnt/sdcard/
if you did /sdcard/, I think it should probably work.

You sir are the man! Thanks for your time.

To get the process all in the same place for anyone else who may need this here you go. Just to make it clear.... This is what I did on my device and it worked. It may or may not work for you but maybe it's worth a try.
1. Downloaded SDK and Java JDK.
2. Used PDAnet to force windows to install the correct ADB device drivers.
3. When the drivers where installed and ADB was working I used this command to push the .zip file to the internal sd card.
adb push rom.zip /sdcard/
Just a few notes for this.
ADB was not working well at first because I had Asus sync running in the background. Make sure this is off.
Also make sure you put the file you are trying to push in the same directory you are using for ADB. For instance I used C:/android-sdk/platform-tools/ to access ADB so the file had to be in that folder in windows explorer.
To make it easier to type (I had to do this a lot while troubleshooting) I changed the name of the rom I was trying to push to rom.zip. This made typos less of an issue.
Make sure that you put the file extension (.zip in my case) in the ADB command even if it doesn't say it when you look at the file in windows explorer.
I think that is it in a nutshell. I hope this helps anyone else who needs to push a rom.
Good Luck

This method in this post didn't work for me, but this one did: http://forum.xda-developers.com/showthread.php?t=1689193

I set Windows to look for driver in c:. After a while one was installed and worked.

What I did on windows 7
Go to Device manager
Find transformer , right click on faulty marked unit.
Select properties
go to tab driver
update driver
Select browse
select path to the subfolder ANDROID ( containing usb drivers from asus )
include subfolders
Windows will find to alternatives , choose xxxx ADB
Windows will complain, ignore
done
/Claes R
W

[S-Off] and Device Offline for PJ831000

This was answered a little bit in the S-Off thread and I would like to post it for everyone that has the PJ8310000 device and they are running into device "offline" when using adb devices. This is for Windows 8 only. I had the same problem in OSX, but I believe the solution is the same. I cannot post in the thread in the developer section yet, that is why this is here.
First, if you can't see your device in your device manager, make sure you have the latest HTC Device drivers installed or install the latest version of HTC Sync. This is very important for Windows 8.
Second, you will need to download and install the latest Android SDK. Just "Download From Other Platforms" and choose the appropriate SDK installation. You will need to run the SDK Manager.exe to install the latest tools. Note: ADB and Fastboot have been moved from the "tools" folder to "platform-tools".
Make sure your phone is in debugging mode by going into the Developer Options and choosing "Android debugging."
Find your SDK installation and make sure you are under "platform-tools" folder. You can ctrl-shift-right click on that folder to open a command prompt at that folder location. Saves you time.
Type in the command prompt:
Code:
adb devices
Your device should be listed and probably says Offline. This is normal. Take a look at your phone, you should get a prompt on your phone asking you if you trust the device that is trying to connect to it (this should be your computer). Allow it.
Type in the command prompt:
Code:
adb devices
This time, your device should be listed with the word "device" instead of offline.
To restart the daemon, type the following separately:
Code:
adb kill-server
adb start-server
This is the best I can do for everyone and it solved my problems with no further issues. I am not an expert and this is the only solution that has worked for me.

Thanks, this worked for me.

I did this in Windows 7 SP1 no problem. All I had to so was get the latest Android SDK and replace all the adb/fastboot files I already had and it worked no problems.
If you get permission denied when doing the last "adb shell" command, get adbd insecure from the forums here and run debugging mode insecurely from there.
Sent from my One X using xda app-developers app

Desertman123 said:
If you get permission denied when doing the last "adb shell" command, get adbd insecure from the forums here and run debugging mode insecurely from there.
Click to expand...
Click to collapse
I had this problem because SU was only allowing apps in CM10.1 (4.2.1). I found the solution by enabling the Dev Options via multiple clicks on the Build number until dev options was enabled, then changed Root access to Apps adn ADB.
FYI for anyone else that gets lost like I was.

ok so i can s-off now?

yes get some, 9 steps to s0ff

Ponarona said:
ok so i can s-off now?
Click to expand...
Click to collapse
Yes, you can use the HTC One XL link in the S-Off thread with no issues. I made this to help people with Win8 and trying to get their phones to appear properly in their device manager and to list it under adb devices.

If you get device offline, my issue, I was running android 4.2.2 but had an outdated adb. Just update adb if you still have problems

I know this is exceedingly random, but if you run a mac and can't see your device in adb, and in the past you tried sharing your phone internet with your mac via usb try running this:
sudo kextunload /System/Library/Extensions/EasyTetherUSBEthernet.kext
./adb kill-server
I need to do that before every adb session.
I'd be amazed someone actually has those conditions, but hey, it might help someone.
Sent from my HTC One X using xda app-developers app