Database Info

external Antenna?

Is there a spot to connect a external antenna like on tytn at the back?

No there is not.

ardsar said:
No there is not.
Click to expand...
Click to collapse
Are you sure?
Its usually hidden somewhere in the battery compartment under a sticker or label or rubber plug. It might even be under the battery its self.
What is very strange i found it in one phone under a lable saying Void if removed...
Very odd considering the plug while not public common use. Is a perfectly viable antenna connection and often used in rigs, car phones and business.
But most phones have them.

Yes, this doesn't.

thnx for the info guys. hmmm this might change my descion to get it. unless it has better reception then i get with my Tytn i wont be able to get reception without it.

This is an issue for me too, as I just found this:
http://www.easydevices.co.uk/products.asp?partno=TCANTENNATPRO&model=
Says it's an external GPS antenna for the HTC Touch Pro...
Or would this work?
http://www.mobilefun.co.uk/product/10939.htm?referer=FR_PROD-PR-P-10939

The first thing is discontinued, obviously because they found out (probably by some angry buyers) that TP DOES NOT have a GPS plug.
The second is a full BT GPS device. Works with any BT enabled computer or PDA (inc. the TP).

GPS Antenna
I was also disappointed that there was no BT antenna available.
I was seaching some GPS antenna maker hoping to find some that could use existing MiniUSB port on TP but it seems the port is unable to support communication with GPS software.
So sad, this would have been a good enhancement to TP if there was MiniUSB GPS antenna maker.

Guys do you know what you are talking about?
I suppose not.
BT or USB are not "generic I do it all" technologies. They work based on specific protocols.
A GPS antenna is usually passive equipment - and even for active ones we mean that something amplifies the received signal.
THAT signal (and in fact the whole antenna), is "stupid". It is the part of the chipset to receive the ELECTRICAL data and make them into usable data.
I am not sure if I am getting through, my English are not the best, but the point is that you are looking in the wrong place for the wrong thing.
Now if you want a real USB or BT GPS that you will use instead of the internal ones, that's a whole different story. This works and actually does it by using the "COM" (serial) support that both USB and BT include.
To make the story more complete though, USB solutions will not work for devices that don't support "USB-host" (i.e. being the host part not the client part of the connection). Most WM don't have this (and yes Diamond and TP also don't). So you are left with BT.
To be honest if you are ready to pay for that premium (and you seem to be, by the links you give), what is your problem if what you connected is a full GPS that "replaces" the internal one or not?
I hope everything is more clear.

I presently use a TyTN II, and have an external aerial as the mount for the device is under a metal dash, so shields the signal...
I therefore need an external receiver for GPS.
Se here: http://freespace.virgin.net/shaw.clan/modifications.html and click on the TomTom hiolder link, although this is with the older QTEC 9100.
Make sense?

For driving with my Garmin in the car i used a Re-Radiating in my Xterra with excellent results.
This is basically the setup I have, although the internal antenna wasn't integrated into the power plug.
http://www.semsons.com/gpsreran.html
Mine is a bit more similar to this so you can control where you mount the internal antenna.
http://www.mapsdownunder.com.au/cgi-bin/mapshop/MG-GPSPHMANTRA45.html
I have yet to test it on the Fuze but will probably do it when I have time this weekend. The change in signal strength is drastic (on the garmin).

Woow insanely expensive!

Kerensky97 said:
....
I have yet to test it on the Fuze but will probably do it when I have time this weekend. The change in signal strength is drastic (on the garmin).
Click to expand...
Click to collapse
Please let us know if it works.

external antenna

Is there a small slide out antenna on the market that i could connect on the connector @ the back of the samsung galaxy s near the sim.
I want to boost up my signal strenght becouse me 3g doesnt work that good in the area.
Any idea's its no problem to customize my backcover

From my point of view its a GSM testing cable connector for the hardware support.
Unfortunately nothing to extend range or to improve signal and not used like some older mobile phones for an external antenna when pluged to a car mount.
Search for
GH39-00985A
CBF SIGNAL RF TEST CABLE
CBF SIGNAL-SCHU550 RF TEST CAB

You are certainly wrong. I had some problem with my antenna before and by inserting a thin copper wire in that plug, i could got signal. It is definitely an external antenna plug. You can see the connection between that plug and internal antenna plug on the mainboard.
stepsch said:
From my point of view its a GSM testing cable connector for the hardware support.
Unfortunately nothing to extend range or to improve signal and not used like some older mobile phones for an external antenna when pluged to a car mount.
Search for
GH39-00985A
CBF SIGNAL RF TEST CABLE
CBF SIGNAL-SCHU550 RF TEST CAB
Click to expand...
Click to collapse

So just stick a piece of copper wire in it?

Do not try it!
It's DEFINITELY an external antenna conector. I've used it to get signal in the middle of nowhere.
That said, DON'T DO IT!
It's VERY easy to break the conection to the internal antenna. Your phone will have no signal afterwards, only with an external antenna. Some had no signal at all, even with an external.
It happened to me, as detailed in this thread.
http://forum.xda-developers.com/showthread.php?p=18594705

[Q] Droid Charge external 4g Connection?

The Charge has 4 ports on the back (behind the cover), which look like external antenna ports.
Has anyone tried to plug in antenna's to these ports?
(BE CAREFUL! ) I heard one person say pluggin in an external antenna might sever the tie to the internal antenna.... Any solid info on this?
I gett -98db on my charge, when it decides to connect to 4g, its awesome.... but its only about half the time.
I have till the 6th to return it. (I tried the TB, it gets slightly better internet, could my Charge be a dud? I get about -93)
At work all I care about is getting good internet.

They are antenna connectors. Apparently, they are a proprietary Samsung type that you can purchase an adapter cable to go a common connector at bestselldist.com My post count isn't high enough to post a link yet...
The bottom of page 6 of Anandtech.com's Droid Charge review shows a diagram of the antennas on the charge (but not the ports.)
They mention that the 4G and 3G are handled by separate antennas. 3G and 4G each have diversity. What I don't understand is why there is L1R2 on one port but R1 and L2 get separate ports. I presume the smaller connector on the right labeled "G" is for wifi.
If anybody could enlighten us, that would be great. I noticed some antenna/amp booster products for the Droid Charge, but I would prefer to some real antennas with large coax running to a pigtail to hook right up to the Charge.
by the way: I highly doubt that connecting an antenna will cause a problem. You generally don't want to connect antennas when the radio is on. That could damage the phone, but I'm not an expert. I was always told to never connect or disconnect an antenna when the device is on...

xdadevnube said:
They are antenna connectors. Apparently, they are a proprietary Samsung type that you can purchase an adapter cable to go a common connector at bestselldist.com My post count isn't high enough to post a link yet...
The bottom of page 6 of Anandtech.com's Droid Charge review shows a diagram of the antennas on the charge (but not the ports.)
They mention that the 4G and 3G are handled by separate antennas. 3G and 4G each have diversity. What I don't understand is why there is L1R2 on one port but R1 and L2 get separate ports. I presume the smaller connector on the right labeled "G" is for wifi.
If anybody could enlighten us, that would be great. I noticed some antenna/amp booster products for the Droid Charge, but I would prefer to some real antennas with large coax running to a pigtail to hook right up to the Charge.
by the way: I highly doubt that connecting an antenna will cause a problem. You generally don't want to connect antennas when the radio is on. That could damage the phone, but I'm not an expert. I was always told to never connect or disconnect an antenna when the device is on...
Click to expand...
Click to collapse
Did you ever find a solution to what you were looking for? I'm interested in doing something like this as well.

External Droid Charge Antenna
I know that those ports on the back of the driod charge have a connector that fits them somewhere, and it seems that I'm not the only one looking. Very curious, isn't it?

The G is ground.
Sent from my Galaxy Tab running MIUI

Please use the Q&A Forum for questions Thanks
Moving to Q&A

so?
Anyone find a definite answer on this?

I would like to revive this thread, as I am in a poor signal area and would like to figure out how to boost my signal properly by plugging in some external antennas.
I am looking to enhance 3G performance (no LTE here.)
Wifi and Bluetooth are a little strip in the back next to the battery. 4G and 3G have separate antennas: http://www.anandtech.com/show/4465/samsung-droid-charge-review-droid-goes-lte/6
Check out this post where a guy connects an external antenna to the Charge:
https://plus.google.com/115676199813038165917/posts/jCmtnbQvgun
If anybody knows what each connector is for, I would love to know. My understanding is that 3G and 4G antennas each are separate and have their own receive diversity. It seems that the Charge uses a single antenna L1R2 to transmit, but I could be wrong.
Also, if G is ground, in where scenario would you use it when connector external antennas? I'm kindof a nube, and plan on doing more research.

screwed up 4G
Ok.. so I was reading some internet sites on how to boost signal.. should have come to this thread first. I have officially screwed up my Charge. I can get 3G but 4G is never connecting.. not sure how to test.
At one time I lost all signal strength, messing with R1 port.
Then i finally got that up.. I lost data messing with L2 port.. compeletly GONE!
Finally got that up.. don't know what L1 R2 is.. but yeah stay away from touching these ports. can't figure out how to get 4G.. One time I was on a hill and i saw 4G pop up! and then it quickly went away..
only have 3G speeds now..
Back to the Lab again.

Did you connect the ports with the device on? If so, it is possible that the it shorted the radios. This may or may not cause permanent damage.
I honestly don't know whether plugging into these ports with the phone on would cause a problem.
I believe that L1R2 is trasmit for the 4g and 3g radios. I believe that R1 and L2 are the receive for 3g and 4g, but I don't know which is which.
I could wrong about this, however. G is likely ground.
In any case, unless you know what your doing, you should be very careful. As soon as I figure out what each of the ports are, I will likely use them.
Look at the link I posted above where a guy hooks his Charge up to an external antenna.
It is very possible to hook up external antennas. There is no doubt about that. It has to been properly to avoid damage. It is possible that the whatever you connected to the port of the Charge has an internal short in it, which would cause damage the Charge radios.
Other considerations are impedance, SWR, tuning frequency, etc. The the right knowledge, it would be a simple matter to connect a very effective antenna for signal boosting on the Charge.

xdadevnube said:
I honestly don't know whether plugging into these ports with the phone on would cause a problem.
It is very possible to hook up external antennas. There is no doubt about that. It has to been properly to avoid damage. It is possible that the whatever you connected to the port of the Charge has an internal short in it, which would cause damage the Charge radios.
Other considerations are impedance, SWR, tuning frequency, etc. The the right knowledge, it would be a simple matter to connect a very effective antenna for signal boosting on the Charge.
Click to expand...
Click to collapse
Not quite correct. I work for a company that specializes in antenna's for cell phones. The Charge, like most Android phones, doesn't have a workable port for an externally connected antenna - sure, you can hook up to the aforementioned port, but that permanently disconnects the phone's antenna (in our experience, from doing this lots of times). Impedance needs to be between 50 and 75ohms, SWR is not a factor, and the frequency is in the 1900 band (for most areas, for 3G).
You can use a wireless repeater (read amplifier), and that works really well - I go from a -98 to a -71, in my house.

chevybythesea said:
Not quite correct. I work for a company that specializes in antenna's for cell phones. The Charge, like most Android phones, doesn't have a workable port for an externally connected antenna - sure, you can hook up to the aforementioned port, but that permanently disconnects the phone's antenna (in our experience, from doing this lots of times). Impedance needs to be between 50 and 75ohms, SWR is not a factor, and the frequency is in the 1900 band (for most areas, for 3G).
You can use a wireless repeater (read amplifier), and that works really well - I go from a -98 to a -71, in my house.
Click to expand...
Click to collapse
Do you have any more information pertaining to what each port on the Charge is?
My Wilson repeater is nearly worthless (massive amounts of lockups, reverting to 1X, flashing red lights that aren't described in the manual, and many more issues even after experimenting with a multitude of installation types) and I just unplugged it after massive amounts of frustration.
In any case, I'd love to get specific information about the ports and how to properly use them, its kindof a shame to let them go to waste.

xdadevnube said:
Did you connect the ports with the device on? If so, it is possible that the it shorted the radios. This may or may not cause permanent damage.
I honestly don't know whether plugging into these ports with the phone on would cause a problem.
I believe that L1R2 is trasmit for the 4g and 3g radios. I believe that R1 and L2 are the receive for 3g and 4g, but I don't know which is which.
I could wrong about this, however. G is likely ground.
In any case, unless you know what your doing, you should be very careful. As soon as I figure out what each of the ports are, I will likely use them.
Look at the link I posted above where a guy hooks his Charge up to an external antenna.
It is very possible to hook up external antennas. There is no doubt about that. It has to been properly to avoid damage. It is possible that the whatever you connected to the port of the Charge has an internal short in it, which would cause damage the Charge radios.
Other considerations are impedance, SWR, tuning frequency, etc. The the right knowledge, it would be a simple matter to connect a very effective antenna for signal boosting on the Charge.
Click to expand...
Click to collapse
Yeah.. i believe i shorted the radio.. it never goes to 4G.. and it will sometimes i get the big X on the signal.. saying i lost all connection.. I really messed something up.. people gotta learn the hard way sometimes. well.. i'm working on getting a replacement. But i agree with everyone on the internet.. this is def.. a taboo thing to do.. don't mess with it.. like ESN hacking.. Sorry i can't be of help.. just wanted to post my experience.

xdadevnube said:
My Wilson repeater is nearly worthless (massive amounts of lockups, reverting to 1X, flashing red lights that aren't described in the manual, and many more issues even after experimenting with a multitude of installation types) and I just unplugged it after massive amounts of frustration.
In any case, I'd love to get specific information about the ports and how to properly use them, its kindof a shame to let them go to waste.
Click to expand...
Click to collapse
PM me - we'll get it figured out for you, no problem.

xdadevnube said:
Do you have any more information pertaining to what each port on the Charge is?
My Wilson repeater is nearly worthless (massive amounts of lockups, reverting to 1X, flashing red lights that aren't described in the manual, and many more issues even after experimenting with a multitude of installation types) and I just unplugged it after massive amounts of frustration.
In any case, I'd love to get specific information about the ports and how to properly use them, its kindof a shame to let them go to waste.
Click to expand...
Click to collapse
Did you get the Wilson repeater for 4G.. it runs in the 700mhz band.
The HTC Thunderbolt has an external antenna on the battery cover.. take it off, and you get bad signal.. It's connected via 2 copper ends on the back of the phone. That would be interesting to copy/mimic on the Charge if it's available.

[Q] Samsung SCS-2U01 Verizon 3G Range Extender Upgrade

I have a SCS-2U01 which i got from Verizon because I moved and my service sucked. I Have goggled all over looking for an antenna upgrade for it, it uses a little tiny antenna and I imagine it would be greatly improved if I could find an antenna to raise the gain, I don't care about the consequences of increasing my signal such as more people being able to hop on my extender, everyone around here uses US Cellular and I don't care, I want better service.. All I see online are Better GPS antennas that will plug into it, That is not my problem my range extender gets a great GPS signal. I want to expand my CELL service the extender provides, it barely works on the other side of my house.
If no-one knows who sells an antenna upgrade for this device (possibly because it uses a strange connector, I haven't looked), can someone tell me which specific frequencies I need to nail to look for a compatible antenna then make my own connector for it. If it is a multi-Frequency issue I am willing to hack together multiple antennas just like an old TV house antenna, but since I'm only dealing with Verizon's EVDO Rev A and voice signal it should be Verizon's 800MHZ and 1900MHZ bandwidths they use. I'm asking for advice from anyone who has done this or knows about using two separate antennas then putting them together into one coaxial connector (of whatever type connector the extender uses). I know that one coaxial connection can support more than one frequency at a time, my asus router has 3 dual 2.4 and 5ghz antennas with only a coaxial connection per antenna.
To summarize my questions are, 1 is there a high(er) gain unpowered 800/1900 antennas out there (or decently cheap powered ones), 2 are those the only two frequencies I need for Verizon service below LTE (Verizon doesn't sell an LTE extender) or is there third frequency I need to be aware of and 3, does anyone know of an issue with SCS-2U01 that wouldn't allow me to do this. It appears the antenna is removable. Well, let me put it this way, I will remove it one way or another if I find higher gain antennas.
Thanks for any and all advice given, I will greatly appreciate it.

antenna
I know this is really late, but I just purchased the
5db Magnetic Mount Antenna with SMA Male connector 690~960 MHz, 1710~2170 MHz, 2500~2700 MHz for LTE, AWS, 4G, 3G, 2G, PCS, GSM etc
from this site:
http://www.maxmost.com/
I was thinking of the 11db Gain Magnetic Mount Antennas Tri-band (800/ 900 / 1800/ 1900 mhz) but the post from here:
http://www.wirelessforums.org/alt-cellular-verizon/verizons-network-extender-96712.html
says this antenna might cause an FCC violation. Plus this antenna is almost 3 feet long so I opted for the 5db antenna that is about 1 foot long. I figured that the frequency has to be around the 800mhz and 1900mhz band since that is what the specs of the scs-2u01 and others say in the specs site: http://www.verizonwireless.com/accessories/samsung-network-extender-scs-2u01/
I tried to use an antenna from an asus router, but that antenna was meant for 2.4ghz and 5ghz so it did not work properly. I will let you know how this antenna does. I was thinking of purchasing a couple of the business model scs-2u3100 and linking them, but this antenna might do the trick, and I already have a working scs-2u01. I tried for a while to get it to work with an asus RT-AC68U, but I could not do it even with all the tricks (DMZ, port forwarding, turning dmsmasq off, disabling SPI, toggling open access and managed access for the extender in verizonwireless.com, setting a static IP address for the extender, changing the static IP address of the extender, and all in 3 different firmwares (latest OEM firmware and latest beta, Merlin's AsusWRT, and DD-WRT )) I finally just replaced the Asus with the Netgear Nighthawk x6. This router is not worth the extra money for me other than the fact that it actually works with the network extender. I thought it might have just been broken for a while, but now I get signal in my house. Every call dropped before I got this working.

Was wondering how you guys made out with alternative antennas. Looking at an upgrade myself. Thanks.

Just in case there are others that are looking to do this I figured I would post my results as I went and purchased a The Wilson 311125 (formerly 301125), 50 Ohm 12-inch Magnet-Mount Antenna is a multi-band antenna that features up to 6.12 dB of gain, from Amazon and just hooked it up to my SCS-2U01. I went from my LG G3 reporting 1 bar of service in my living room to a consistent 3 bars and the notification bar reports 3G connectivity where it didn't prior.

That sounds good! What was the connection at the SCS-2U01, i.e. what type of rf connector was it? How difficult was it to detach the existing antenna and attach the 311125?

Only 7 years later lol, glad that worked out.. Anyone know about the same info but for the newer 4g or 5g extenders?
My original problem was solved by Wi-Fi Voice on a newer phone.

Htc white coax antenna ?

Hello,
Can you please tell me what is te purpose of the white coax cable conecting the charging module with main board.
I understand that is a antenna cable, i've broke the c connector by mistake and the phone is functioning ok, 3g, 4g wifi .
Thank you

possibly a second antenna is available
I don't think smartphones today have only one antenna, to use MIMO on different streams smartphones have multiple antennae
so you might have broken one, see and compare connection speeds
if you have 802.11AC router the maximum supported speed is 866Mbps
if rooted, you can use LTE discovery and see if you are able to use carrier aggregation