Hi,
I didn't find any information about this: create all images you need to flash yours device and put them into one file (like shipped rom from HTC)
If it's not possible tell me why - yes, I'd really like to know
regards,
Robert
I'm not sure of what you mean. The RUU_signed.nbh file contains a lot of things: the Windows Mobile 6 OS, Programs, and maybe the radio firmware.
What do you have to begin with?
I'd like to get ROM for my Kaiser from polish Orange - I've found only reconstructed ROM without specific radio 1.27.12.29 (this radio is available as 4 files, not one *.nbh file)
greetz
Can anyone give me some guidance on this? I am looking to dump the SPL and Radio from the device (not an NBH file ... that is easy).
Can someone running a stock ROM attempt to extract the SPL using the command pmemdump 0x9a000000 0x80000 spl.nb ... If I can get a copy of this from a stock ROM, I can compare it to the SPL included in the stock ROM NBH file.
pmemdump is part of ITSUTILS.
I also would like to attempt this.
I have just received a new TP2 and discovered it has a newer radio 2.18.02WV and would like to see if it can be extracted from the device.
Suggestions anyone??
diamondfuel said:
I also would like to attempt this.
I have just received a new TP2 and discovered it has a newer radio 2.18.02WV and would like to see if it can be extracted from the device.
Suggestions anyone??
Click to expand...
Click to collapse
Can you run the command listed in post 1 and post the output file? I can compare this output file to the 2.18.02WV radio to verify that the addresses are correct.
Thanks.
DJ
Hi, have you already got this?
I can do it for you.
I am trying to convert a MZ600 to MZ601.
I assume there are no actual hardware differences, but only software.. and I have not found any sources/info proving otherwise...
I have allready fastboot-flashed system/user/boot/recovery of MZ601 Europe stock images, to my VZN MZ600 Xoom and everything works fine except the mobile-network ofcourse...
(btw SIM is working!)
So how can I flash the baseband to the European one ?
Is the radio.img all I need ?
In that case, can somebody send me one?
I have tryied a full EU firmware flash with RSDlite, but I get an error "Unable to retrieve initialization values from INI file." so I cant start flashing...
Any ideas?
Thanks
I saw in other thread you have gsm sbf, perhaps using sbf recalc or sbf depacker you can extract its radio image..
please check this link
http://modmymobile.com/forums/402-general-motorola-android/530781-sbf-depacker-1-3-03-22-2011-a.html
http://and-developers.com/sbf
I thought the recovery / img files were on motorola's website now?
Thanks lesjaw , I will try..
(I did a search for sbf extractors but did not find those ones! )
Lothaen , motorola gives away the common partitions, (userdata/system/boot/recovery) and not the hardcore ones such as the radio one!
lesjaw, I tried both software. They both allow me to split files, from the SBF.
That results into 13 SMG files, which I assume are partitions (and something else?)
What format are these ? can I open them ? How do I identify the radio.img
is the IMG format same as SMG ?
MotoAndroidDepackerMono, has an option to extra radio.img, but thats from an update.zip, which I what I am trying to create
i see, honestly I never use those app, in sunday i'll give a shot..
btw, you can join #milestone-modding in freenode (irc), many of those members channel have good experience regarding sbf file..
good luck brother..
Any idea anyone, how to identify the radio image, from a SBF extract to SMG files ?
Once identified, can I use an SMG file as a "radio.img" ?
HMJ37 sbf
Motorola did just release a few days ago a new sbf for the MZ600 that is the full HMJ37 version. Here is the full file name out of the latest spreadsheet for anyone with RSD access:
VZW_MZ600_Signed_HMJ37_Signed_MDM6600BP_C_02.0F.00R_SW.combo.sbf
I think he needs an image from MZ601, not MZ600!
its been quite some time, and have not yet found an answer to this problem!!..
attached is the export from the SBF file of MZ601
I asume one of these files, is the radio.img , correct ? which one is it?
Can I do a fastboot flash radio radio.img ,using one of these files!?
Is it safe to try with the user partition to confirm my theory ? (I can identify it, from the byte size)
I tried to open the images with unyaffs-x86-win and cygwin but I always get an error message "broken image file" even on motorola's official images, hence I've got something else wrong (?)
So many questions left unanswered for so long! and I though XOOM was for hardcore android users!
nikil511 said:
its been quite some time, and have not yet found an answer to this problem!!..
attached is the export from the SBF file of MZ601
I asume one of these files, is the radio.img , correct ? which one is it?
Can I do a fastboot flash radio radio.img ,using one of these files!?
Is it safe to try with the user partition to confirm my theory ? (I can identify it, from the byte size)
I tried to open the images with unyaffs-x86-win and cygwin but I always get an error message "broken image file" even on motorola's official images, hence I've got something else wrong (?)
So many questions left unanswered for so long! and I though XOOM was for hardcore android users!
Click to expand...
Click to collapse
Are you sure that's from a MZ601 and not a Wi-Fi only MZ604 (see the "HUBBLE" and "WIFI" strings)?
You cannot fastboot flash the radio partition (which probably is called something like bpsw given this is a Motorola device). Given that these are proprietary firmware blobs, do not expect to get far assuming that these are yaffs/ext/whatever filesystem images.
thisi is where i found the SBF
http://www.mod2xtreme.com/showthread.php?t=10571
so I assume it has the radio partition.
So if I can not extract it from the SBF, how are all these baseband update zip been constructed on all other tablets/phones ? why are there none for XOOM eventhout various baseband versions exist ?
or this h.6.2 means that should be for mz604(wifi only) so it should contain no baseband image. ?
convert mz600 to mz601
hello all,
nikil511 , did you found any solution? i'd really like to convert my mz600 to mz601 !
concerning the sbf, because of the name we know it's from the wifi xoom.
but as info, the radio is cg5
regards
http://sbf.droid-developers.org/everest/list.php here new full image
in amms_sec.mbn
we can find string for new firmware VTHUBBLE_N_01.100.07P
or in rdl1.smg ..
how to use it? or convert to .img in .zip file ?
i do it
http://forum.xda-developers.com/showthread.php?t=1845212
I need to flash a new android custom rom. it is Miui rom i think the baseband is for china only.
So , i like to extract baseband from zip flash file, but i don't know where are baseband files in zip flash file.
The context of zip file is:
data[folder],META-INF[folder],system[folder],boot.img,fat.bin,modem_st1.mbn,modem_st2.mbn
any help please
Your best bet would be to check a miui site. There is no development for it here.
Roms usually don't contain the baseband, but if that text you posted is from the ROM zip, the modem files are the baseband.
Sent from my G3, with mods made possible by team Codefire.
I reside in Spain and was trying to find the Firmware to update my ATT Note10+ 5G (SM-N976U) and came across this website https://firmware.gem-flash.com to which I paid for the following files:
(1) COMBINATION_FAC_FAQ0_N976U1SQU3ATF1_FACFAC_CL18966390_QB32158047_REV00_user_mid_noship_MULTI_CERT.tar.md5
(2) N976U1SQU3ATF1_ENG_MODEM
I was hoping that the RAR files would contain the ODIN3 [BL/AP/CP/CSC/Home CSC/UserData] files but unfortunately it did not.
I would be most grateful if anyone can explain what the above files are for and if they are what I require to flash my phone and is there a program similar to ODIN that I would need to do so.
If necessary I can give access to the Gem Flash account from which the files can be downloaded and tested as it appears that the ''COMBINATION_FAC'' file is too large to upload here.
Thanks in advance for any assistance that may be offered.
Combination file is used to put the phone in factory(engineering mode), and the eng modem is just a modem extract from the combination file.
If you are not doing any hacks on the phone, those two files have no use