[Q] Cant flash captivate back to stock - Captivate General

I have tried more times than I can count to get it back to stock. Each time it gets stuck at modem.bin Has anybody experienced this and also am I totally stuck with a paperweight?

If it turns on then its not a brick. If it goes into download mode its not a brick.if its bricked then use unbrickable mod.
But try a different USB cable and make sure your using the USB that is connected to the motherboard. Also make sure your running Odin as admin.
Sent from my unbrickable cappy *bam*

bulletproof1013 said:
If it turns on then its not a brick. If it goes into download mode its not a brick.if its bricked then use unbrickable mod.
But try a different USB cable and make sure your using the USB that is connected to the motherboard. Also make sure your running Odin as admin.
Sent from my unbrickable cappy *bam*
Click to expand...
Click to collapse
What happens when the SD card is so damaged from over flashing that it can no longer be flashed but can be read from? At that point it's not a Brick.. but you can't reload the software/firmware on to it.

So at that point I am screwed?

You make a point. But do you think that's his problem?
Sent from my unbrickable cappy *bam*

bulletproof1013 said:
You make a point. But do you think that's his problem?
Sent from my unbrickable cappy *bam*
Click to expand...
Click to collapse
Sorry just presenting a scenario. What file are you using to flash back to stock with?

Using this I897UCJH2 and s1_odin_20100512.pit

krirish said:
Using this I897UCJH2 and s1_odin_20100512.pit
Click to expand...
Click to collapse
JH2 isnt stock.

what is stock?

Jf6 is stock 2.1
Sent from my unbrickable cappy *bam*

There's also a KB1 and KB2 that can be flashed as stock, depending on when you got your phone. KB1 should be the earliest you have to go since it was a Kies push to all cappy's that had 2.1.1.

So bad news thought I had it fixed it flashed but never rebooted. Now I have a phone that does nothing doesnt even turn on. Looks like jtag service for me

krirish said:
So bad news thought I had it fixed it flashed but never rebooted. Now I have a phone that does nothing doesnt even turn on. Looks like jtag service for me
Click to expand...
Click to collapse
no jtag.
UNBRICKABLE MOD!

Why no jtag?

krirish said:
Why no jtag?
Click to expand...
Click to collapse
dont read the forums much? or the front page of the website?
UNBRICKABLE MOD!
go read about it in the dev section for pete's sake

I see in further reading do I read correctly this requires soldering something that is pretty small correct? Only reason I ask is I have very minimal soldering experience

krirish said:
I see in further reading do I read correctly this requires soldering something that is pretty small correct? Only reason I ask is I have very minimal soldering experience
Click to expand...
Click to collapse
nevermind. send it off for jtag. then the next time it bricks you can send it in again.....
or you can SEND IT TO SOMEONE that does the unbrickable mod.....then never have to worry about it again

Going through the post I didnt see anybody that said they are doing it? Any info is helpful

krirish said:
Going through the post I didnt see anybody that said they are doing it? Any info is helpful
Click to expand...
Click to collapse
anybody that can solder that small can do it.
pretty sure adamoutler and mobiletechvideos offer the service.

krirish said:
Going through the post I didnt see anybody that said they are doing it? Any info is helpful
Click to expand...
Click to collapse
P.M. adamoutler, if he its too busy then go here
http://mobiletechvideos.mybigcommerce.com/samsung-captivate-unbrickable-mod-repair/
Sent from my I897 using XDA App

Related

Well damn, seems I've bricked.

Tonight I flashed the leaked i9000 GB and when I was done I tried to flash to stock with Odin and thats the last my phone has done anything. My phone is completely unresponsive. Black screen with no response to USB or 3button or anything. So I'm going to go cause a rukus at ATT in the morning when they open and hopefully I'll have a nice new Captivate tomorrow lol.
Just thought I'd share.
USB Jig?
Well from my research it seems that since my phone won't do ANYTHING then its a bootloader issue so a JIG won't work.
ih4ckback said:
Well from my research it seems that since my phone won't do ANYTHING then its a bootloader issue so a JIG won't work.
Click to expand...
Click to collapse
Jig will fix it.
ryude said:
Jig will fix it.
Click to expand...
Click to collapse
Really? well I guess I'll head to radioshack and try that first. I'd love to not have to deal with ATT.
Hmm . Im on gb now. Havnt flash stock yet
Sent from my GT-I9000 using XDA Premium App
Yup. Same here. LOL. Damned leaked GB. I think it's because it's a development snapshot, so it might not be very stable yet.. Or they DID lock the bootloader with it. I'm not sure. I find it weird, since I've flashed tons of crap, and this is the one that bricks my captivate. I just ordered a jig. Thank god my brother had a Captivate, and he's friendless so I'm using his phone for now.
You need to watch what you flash. Most newer leaks contain bootloaders that will brick your device if you try to flash back to something substantially older.
Yep I know. lol.
If it helps, when I flashed to the leaked GB, I couldn't access download mode with the new 3 button comb after I (noobishly) tried to boot into clockworkmod recovery from rom manager. I had to hold down both vol up+down as well as power, and the instant it turned off, I switched to holding down only vol down and power, which got me into download mode.
Having similar issues.
No matter what I try, I cannot get past the Galaxy S logo. I can send ADB commands but the download command simply reboots the phone.
Device manager also sees it as a Nexus S now instead of a Captivate, not sure if this affects how ADB sends commands.
well at least you can do something with your phone lol.
If adb sees as a nexus, it probably wasnt a real galaxy s leak
That's why it is nice to have a jig even if you never had a need for it, just one time it pays for itself.
that's what I'm hoping lol I'm going to head over to radioshack as soon as they open at 10 lol.
Yea flash stock works for me..just like any i9k rom
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
ih4ckback said:
that's what I'm hoping lol I'm going to head over to radioshack as soon as they open at 10 lol.
Click to expand...
Click to collapse
If the jig doesn't work, then you are gonna have to see if ATT will do a swap or something.
is there any reason to think that the jig won't work?
There is always that chance.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
ih4ckback said:
is there any reason to think that the jig won't work?
Click to expand...
Click to collapse
People have reported that it didn't work in that situation. Im pretty sure you need a jtag but it can't hurt to try.
I was hard bricked once after a bad flash so I was in the same position as you. I didn't have a jig at the time to test so I just brought it in to AT&T and said the ota update bricked it. They replaced it with a refurbished one with no questions asked.
Sent from my GT-I9000 using XDA App

[Q] (Help!) Hard bricked skyrocket?

Hey guys,
So I have the Galaxy S2 Skyrocket with AT&T and I have it rooted etc. Today I tried flashing the MIUI rom, but was unsuccessful due to a message saying "Installation aborted". So I did as I read to do and wiped cache, Delvik or w/e, and then I reformatted the SDcard to redownload the ROM, however when I rebooted the next time it did not boot back up. Now I have the phone completely dead it would seem, I have tried the button combinations, etc to no avail.
What happened and is there anything I can do?
How can my phone be bricked if I never got to install a new ROM? I can't be without it for too long so any answers would be appreciated
Thanks,
Smernst
When you say button combinations are you saying you tried to get into download mode?
Sent from my SAMSUNG-SGH-I727
Sheolrock said:
When you say button combinations are you saying you tried to get into download mode?
Sent from my SAMSUNG-SGH-I727
Click to expand...
Click to collapse
Yes, exactly that
Smernst said:
Yes, exactly that
Click to expand...
Click to collapse
Sometimes download mode can work even if the screen isn't turning on. You should follow the instructions for download mode and see if Odin recognizes the phone.
Sent from my SAMSUNG-SGH-I727
Well there are symptoms of Brick See below and find ur category!!!!
appdroid said:
Brick → When used in reference to consumer electronics, "brick" describes a device that cannot function in any capacity (such as a device with damaged firmware). This usage derives from the fact that some electronic devices (and their detachable power supplies) are vaguely brick-shaped, and so those which do not function are useful only as actual bricks. The term can also be used as a verb. For example, "I bricked my phone when I tried to modify its firmware.
Hard Brick → When your phone does not turn on at all. When you can’t get in to CWR/CWM Or Stock recovery. You are basically screwed. If its hard brick Here is thread that will help you!!!
Soft Brick → When your phone bootloops. When you can get into CWR/CWM. When You can use jigtag to get into download mode.
Click to expand...
Click to collapse
Smernst said:
Yes, exactly that
Click to expand...
Click to collapse
appdroid said:
Well there are symptoms of Brick See below and find ur category!!!!
Click to expand...
Click to collapse
UPDATE:
I just went in to the AT&T store and they are sending me a new phone tonight and it should be here tomorrow!
Now, does anyone have a guide to recommend for getting, say, MIUI onto the Samsung Galaxy S2 Skyrocket? I don't know enough about the versions, mp5, etc to do it alone, and a safe guide would really help me
Thanks
MIUI rite now is not daily driver has lots of bugs and Here is link scroll down it will give you step by step instructions.
Smernst said:
UPDATE:
I just went in to the AT&T store and they are sending me a new phone tonight and it should be here tomorrow!
Now, does anyone have a guide to recommend for getting, say, MIUI onto the Samsung Galaxy S2 Skyrocket? I don't know enough about the versions, mp5, etc to do it alone, and a safe guide would really help me
Thanks
Click to expand...
Click to collapse
Got it, thanks
Also, if my phone is truly hard-bricked the AT&T guys that I return it to will not be able to tell that it is rooted will they?
Thanks
No att ppl are dumb and they can't even turn on the phone so they won't be able to say that it was rooted. When they ask you anything about rooting just pretend like you don't know what they are talking about.
Smernst said:
Got it, thanks
Also, if my phone is truly hard-bricked the AT&T guys that I return it to will not be able to tell that it is rooted will they?
Thanks
Click to expand...
Click to collapse
appdroid said:
No att ppl are dumb and they can't even turn on the phone so they won't be able to say that it was rooted. When they ask you anything about rooting just pretend like you don't know what they are talking about.
Click to expand...
Click to collapse
Okay sweet thank you for all the help!
See you around
Smernst
Hope next phone doesn't give you any grief.
Sent from my SAMSUNG-SGH-I727 using xda premium

[Q] (Q) Downgrade frm CM 9 back to gingerbread and bricked [Resolved, please delete]

I tried going back to gingerbread using Heimdall 1 click and it gives me a kernel error and failed. Now phone won't boot past the rogers logo. Any suggestions? No samsung screen. No green battery indicator when plugged in. Heimdall does detect the phone, and I've tried all USB ports and cords at my disposal. I use a mac so no access to odin. This is the first brick I haven't been able to get myself out of. Any help you would be appreciated
I am a gt i9000 owner, but can you get into download mode?
Sent by Santa Clause
If you can get download mode, then flash a gingerbread stock rom, even if it means you will lose root still do it, then flash a new rom of your choice, if you can get into download mode then you haven't got a brick
Sent by Santa Clause
Been bricked more than once...you have?
Embarking on a fresh new ROM without educating oneself can be very frustrating....since your on a Mac..with in the one click you say it reading your phone...can you get to download mode?
Pull battery
Plug in USB to phone
Hold both volume button
Pop battery back in
Do you see...the yellow Android digging?
http://forum.xda-developers.com/showthread.php?t=1293751
bigjoe2675 said:
Been bricked more than once...you have?
Embarking on a fresh new ROM without educating oneself can be very frustrating....since your on a Mac..with in the one click you say it reading your phone...can you get to download mode?
Pull battery
Plug in USB to phone
Hold both volume button
Pop battery back in
Do you see...the yellow Android digging?
Click to expand...
Click to collapse
I can get into download mode.heimdall detects my phone. I tried both qksters and adam outlers 1 click. neither would take. If I upgrade heimdall version (as it tells me its out of date) it wont get through the initial connection to the phone. if I use with out upgrade it continues to fail on kernel download.
This is my second brick (first one was when trying to root it on my mac) First brick was fixed through odin at my work. Unfortunately I don't want to wait till monday to have a functioning phone
teknhard said:
I can get into download mode.heimdall detects my phone. I tried both qksters and adam outlers 1 click. neither would take. If I upgrade heimdall version (as it tells me its out of date) it wont get through the initial connection to the phone. if I use with out upgrade it continues to fail on kernel download.
This is my second brick (first one was when trying to root it on my mac) First brick was fixed through odin at my work. Unfortunately I don't want to wait till monday to have a functioning phone
Click to expand...
Click to collapse
Hummmm..ok
Let's step back here does out prompt you for drivers?
....you might have to make a stop at your office..
Try different USB ports, I used heimdall yesterday to go back to gingerbread (so I could get the boot loaders) and I had the same problem as you, I finally got it to work with a different USB port and even then it kept failing...but I just kept trying and eventually it went through
(Pull battery, place battery back in, hold volume up and down, plug USB in-should put you in download mode...even if you can't see anything on your screen you can still enter download mode)
Sent from my SGH-I997 using XDA
DOesnt prompt me for drivers. It detects my phone and says ready to flash. I see the download mode screen. so its not completey screwed. Just can't get past the rogers logo.. I only have two USB on my macbook.. tried both quite a few times guess i'll mess with it some more. see if I can get it going. Thanks for the tips. ANy others ideas would also be appreciated
Alright, here it is:
I encountered the same problems yesterday, heimdall doesn't work when flashing back to stock from ics, from what I've found, you must use gtg's ultimate unbrick, the pit repartitions everything and also resets your binary counter (cha-ching! ). Once completed, your phone will reboot and be stuck at "...installing default apk files..." for a few minutes, don't panic, let it run its course. From there on, you can do the usual root/flash cwm deal. .
Sent from my SGH-I997 using Tapatalk 2 Beta-5
theROMinator said:
Alright, here it is:
I encountered the same problems yesterday, heimdall doesn't work when flashing back to stock from ics, from what I've found, you must use gtg's ultimate unbrick, the pit repartitions everything and also resets your binary counter (cha-ching! ). Once completed, your phone will reboot and be stuck at "...installing default apk files..." for a few minutes, don't panic, let it run its course. From there on, you can do the usual root/flash cwm deal. .
Sent from my SGH-I997 using Tapatalk 2 Beta-5
Click to expand...
Click to collapse
Funny I just did that yesterday using qkster heimdall after running the ics for the day....no issues utilizing it...so i say it does work...
theROMinator said:
Alright, here it is:
I encountered the same problems yesterday, heimdall doesn't work when flashing back to stock from ics, from what I've found, you must use gtg's ultimate unbrick, the pit repartitions everything and also resets your binary counter (cha-ching! ). Once completed, your phone will reboot and be stuck at "...installing default apk files..." for a few minutes, don't panic, let it run its course. From there on, you can do the usual root/flash cwm deal. .
Sent from my SGH-I997 using Tapatalk 2 Beta-5
Click to expand...
Click to collapse
I went back to stock from ics yesterday using heimdall...just took a long time and a lot of tries
I really think it depends on the computer though, for some Odin works best...for others heimdall works best
Sent from my SGH-I997 using XDA
bigjoe2675 said:
Funny I just did that yesterday using qkster heimdall after running the ics for the day....no issues utilizing it...so i say it does work...
Click to expand...
Click to collapse
I did not mean to be misleading, as you both have said, either or may work, I simply wanted to share my experience
mg2195 said:
I went back to stock from ics yesterday using heimdall...just took a long time and a lot of tries
I really think it depends on the computer though, for some Odin works best...for others heimdall works best
Sent from my SGH-I997 using XDA
Click to expand...
Click to collapse
Sent from my SGH-I997 using Tapatalk 2 Beta-5
mg2195 said:
I went back to stock from ics yesterday using heimdall...just took a long time and a lot of tries
I really think it depends on the computer though, for some Odin works best...for others heimdall works best
Sent from my SGH-I997 using XDA
Click to expand...
Click to collapse
Agreed. On my desktop (quad core 6 gb ram, watercooled blablablabl) can't run heimdal nor Odin to save its life.
My netbook (single core atom) took me back from CM9 with Odin like it was nothing.
My 7 year old laptop (running Ubuntu) works great using Heimdal (just run the .jar file as an executable)
theROMinator said:
I did not mean to be misleading, as you both have said, either or may work, I simply wanted to share my experience
Sent from my SGH-I997 using Tapatalk 2 Beta-5
Click to expand...
Click to collapse
No ... understood..no worries...there are some many that have never flashed or much less read anything regarding flashing are having so many prob`s...when this ics it's still bring birthed...for the infuse.
Instead of going to the dev section and doing some home work...understanding the basic info....they see ICS and have pictures of Sunday treats....in their mind...having no clue about the current ROM they are on now...Then the questions pop up...from individuals...after wards yelling SOS...But hey it's their phone.
bigjoe2675 said:
No ... understood..no worries...there are some many that have never flashed or much less read anything regarding flashing are having so many prob`s...when this ics it's still bring birthed...for the infuse.
Instead of going to the dev section and doing some home work...understanding the basic info....they see ICS and have pictures of Sunday treats....in their mind...having no clue about the current ROM they are on now...Then the questions pop up...from individuals...after wards yelling SOS...But hey it's their phone.
Click to expand...
Click to collapse
I've flashed lots of roms and never had any issues. Also looked through the forum and know the basics about getting back to stock. I'm no expert, but I have a decent idea what I'm doing. I do appreciate a forum you can ask questions though and have people help out when your stumped. I did what i could from the tools I have at my disposal here, and ran into some problems. I'm not yelling SOS, just asking for some tips as what I have tried hasn't worked. All the same I do appreciate everyones opinions and help they provide. THat's what makes this forum great.
why would you need to heimdall if you are on a rogers infuse? Isn't that for AT&T phones only?
teknhard said:
I've flashed lots of roms and never had any issues. Also looked through the forum and know the basics about getting back to stock. I'm no expert, but I have a decent idea what I'm doing. I do appreciate a forum you can ask questions though and have people help out when your stumped. I did what i could from the tools I have at my disposal here, and ran into some problems. I'm not yelling SOS, just asking for some tips as what I have tried hasn't worked. All the same I do appreciate everyones opinions and help they provide. THat's what makes this forum great.
Click to expand...
Click to collapse
I apologize wasn't directed to you just in general and your correct this forum is great...
Then reflash ics lol
Sent from my SGH-I997 using xda premium
threi_ said:
why would you need to heimdall if you are on a rogers infuse? Isn't that for AT&T phones only?
Click to expand...
Click to collapse
Because I don't have access to a PC for Odin, and the at&t should work to get me out of brick state. I currently can't get past rogers boot screen
GoSooners345 said:
Then reflash ics lol
Sent from my SGH-I997 using xda premium
Click to expand...
Click to collapse
I don't have recovery.. otherwise I certainly would have

From bricked to fixed.

I was caught in a boot loop and tried to re flash, when in my haste I forgot that Odin will recheck partition when loading .Pit files (pretty lame feature)
Still it was my fault for clicking start in haste.
**phone was partitioned, and would not go into download mode, it was stuck in a screen that said "Firmware update error, please restore in Kies", but it wouldn't connect to kies**
I sent my phone to XDA member Connexion2005
http://forum.xda-developers.com/member.php?u=1602851
I haven't got it in my hands yet, but he just told me it was fixed, I can't wait to get it back and leave it the hell alone (until someone makes CM7 or better work on it)
anyhow, this is out there so if you do what I did (DON'T) there's a solution. Set me back $50 plus shipping to TX from NYC but still, I didn't have to get a whole new phone.
for 50 bucks im sure k0nane would have made an uberfixit tar :/
shabbypenguin said:
for 50 bucks im sure k0nane would have made an uberfixit tar :/
Click to expand...
Click to collapse
Absolutely.
shabbypenguin said:
for 50 bucks im sure k0nane would have made an uberfixit tar :/
Click to expand...
Click to collapse
Please elaborate. Not finding much info on this "uberfixit", but it sounds like it's some method of re-creating the stock filesystem that's flashable in odin?
I was putting this out there, because I'm not the only one that this will happen to.
yea it happens when you repartition, an uberfixit requires a complete dump of the phone and quite a bit of time, but will completely fix what you described
the problem with repartitioning is that it wipes the phone clean and then starts to reinstall everything, problem is neither one of teh tars has the full dump (we do it for the sake of saving actual bricks)
knowing someone who can jtag is great we have had a few epic 4g touches that crashed and burned and were saved via jtag.
shabbypenguin said:
yea it happens when you repartition, an uberfixit requires a complete dump of the phone and quite a bit of time, but will completely fix what you described
the problem with repartitioning is that it wipes the phone clean and then starts to reinstall everything, problem is neither one of teh tars has the full dump (we do it for the sake of saving actual bricks)
knowing someone who can jtag is great we have had a few epic 4g touches that crashed and burned and were saved via jtag.
Click to expand...
Click to collapse
You may not remember, but I did go onto your IRC and spoke with you regarding this issue.
oh sorry, the irc channel we have is for a bunch of devices currently we house blaze 4g, attain 4g, conenct 4g, lucid and optimus m+ owners. so i probably thought you were an attain owner since we have had a good number of attain owners repartition as well :/
shabbypenguin said:
oh sorry, the irc channel we have is for a bunch of devices currently we house blaze 4g, attain 4g, conenct 4g, lucid and optimus m+ owners. so i probably thought you were an attain owner since we have had a good number of attain owners repartition as well :/
Click to expand...
Click to collapse
it's all good, bottom line is I f'd up my device, but now its fixed.
um...yeah...
So i did the exact same thing as you... Been trying to find anyone who can help me out. Is there anyway I can fix it myself? I haven't found a single place in my whole state that can fix the problem. If at all possible, I'd like to avoid sending it out for repair.
So how do I get this uberfixit?
I stupidly re-partitioned using Odin, also: I did not realize that Odin re-checked the check box -even after unchecking- when a new pda file was loaded. My bad. Totally though it was bricked until i was able to flash this stock gingerbread rom, but now kies says that my Blaze S does not qualify for upgrades... Did the re-partitioning do this?
I can no longer get to the recovery screen, although if I restart my blaze while connected to a pc via usb, it does allow the "re-install OS?" page to display, and I can get to recover from there: But absolutely no more access to the recovery "menu" which allows me to wipe cache/restore to factory/etc.
Just Odin cwm back then flash away
Sent from my SAMSUNG-SGH-T769 using xda app-developers app
Thanks for the quick reply; I will try that right now: My fingers are crossed.
2vivid said:
Just Odin cwm back then flash away
Sent from my SAMSUNG-SGH-T769 using xda app-developers app
Click to expand...
Click to collapse
thomassino said:
Thanks for the quick reply; I will try that right now: My fingers are crossed.
Click to expand...
Click to collapse
It's just a soft brick, I have done that at least 10 times.
Will you make this?
k0nane said:
Absolutely.
Click to expand...
Click to collapse
Hi, k0nane I too have bricked my phone due to not unchecking re-partition. Now no matter what I do the phone displays the "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. It is frustrating. I will certainly pay you if you make a fix for this that I can flash in odin! I don't care if it wipes my phone completely as I was trying to flash a new rom anyways. Please reply I'm desperate to get this thing working again.
runboyrun said:
Hi, k0nane I too have bricked my phone due to not unchecking re-partition. Now no matter what I do the phone displays the "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. It is frustrating. I will certainly pay you if you make a fix for this that I can flash in odin! I don't care if it wipes my phone completely as I was trying to flash a new rom anyways. Please reply I'm desperate to get this thing working again.
Click to expand...
Click to collapse
That's a soft brick.
No need to pay anyone lol just pull the battery and go back to download mode (for Odin) again and revert back to stock. A quick search through 'bricked' type threads would have netted this info :thumbup:
Sent from my SGH-T769 using xda app-developers app

Help help help

Okay so was rooting and CWM phone---got CWM on flashed VALHALLA--then tried to install OTA or what ever ICS from here http://www.androidauthority.com/vibr...tom-rom-88855/
BRICKED THE PHONE----- I get phone into DOWNLOAD and i cant find a ODIN rom/recovery fix phone back normal
someone please give LIVE links to fix or step by step to get back to origional
I want to get the phone working again then get CWM/ROOT and get to ICS so if can help id appreciate it thank you
Also tired Heimdall and asked me do drivers and then just fails and now even Odin wont see phone
The SGS4G is not the Vibrant, it's not the T959, It's the T959V. V. V. V. (Or W in Canada)
Right from your site
"The instructions in this guide are intended for use with the Samsung Vibrant, model number SGH-T959. Applying these instructions on another device or model may produce undesired outcomes."
So what phone do you have, the 959 or the 959V.
getochkn said:
The SGS4G is not the Vibrant, it's not the T959, It's the T959V. V. V. V. (Or W in Canada)
Right from your site
"The instructions in this guide are intended for use with the Samsung Vibrant, model number SGH-T959. Applying these instructions on another device or model may produce undesired outcomes."
So what phone do you have, the 959 or the 959V.
Click to expand...
Click to collapse
Not sure...t mobile samsung s 4g the Vavhall rom worked perfect so im assuming its that 995v or what not
enzodad said:
Not sure...t mobile samsung s 4g the Vavhall rom worked perfect so im assuming its that 995v or what not
Click to expand...
Click to collapse
That's like saying well I assume my buddies car I borrowed takes gas when in reality it's a diesel. Just look under your battery and type EXACTLY what you see there.
hechoen said:
That's like saying well I assume my buddies car I borrowed takes gas when in reality it's a diesel. Just look under your battery and type EXACTLY what you see there.
Click to expand...
Click to collapse
SGH-T959V but the Heimdall one click not working and now i cant use odin---UGH
enzodad said:
SGH-T959V but the Heimdall one click not working and now i cant use odin---UGH
Click to expand...
Click to collapse
Follow this then thanks the guy who put it together:
The Guide
hechoen said:
Follow this then thanks the guy who put it together:
The Guide
Click to expand...
Click to collapse
Thanks but im bricked i can only go to DOWNLOAD on phone....
And heimdall says this
Initialising connection...
Detecting device...
Claiming interface...
Setting up interface...
Checking if protocol is initialised...
Protocol is not initialised.
Initialising protocol...
Handshaking with Loke...
Beginning session...
Session begun with device of type: 0
Downloading device's PIT file...
PIT file download sucessful
Local and device PIT files don't match and repartition wasn't specified!
Ending session...
Rebooting device...
Device not connected.
enzodad said:
Thanks but im bricked i can only go to DOWNLOAD on phone....
Click to expand...
Click to collapse
First, you flashed the wrong rom on your phone because the T959 IS NOT THE T959V. Despite the fact there is a pesky V there, people seem to think it's the same. That's like saying $10,000 is the same as $100,000, it's just an extra 0, it can't matter much.
-----
If you can get into download mode, then you're not that far bricked. If odin or the one click aren't working, I'd say it's a driver issue. The fact that posted right after hechoen gave you the link, I doubt you even read through the whole guide to make sure the drivers, etc are all properly installed.
---------- Post added at 07:35 PM ---------- Previous post was at 07:31 PM ----------
Try this the stock kj6 + root in this thread.
http://forum.xda-developers.com/showthread.php?t=1822626
Follow the proper instructions here on to make sure the drivers are setup properly.
http://forum.xda-developers.com/showthread.php?t=1470716
You earn an F for the day.
Better luck next time.
I Can't believe you DOUBLE POSTED the sam bulls*** and have no remorse.
getochkn said:
First, you flashed the wrong rom on your phone because the T959 IS NOT THE T959V. Despite the fact there is a pesky V there, people seem to think it's the same. That's like saying $10,000 is the same as $100,000, it's just an extra 0, it can't matter much.
-----
If you can get into download mode, then you're not that far bricked. If odin or the one click aren't working, I'd say it's a driver issue. The fact that posted right after hechoen gave you the link, I doubt you even read through the whole guide to make sure the drivers, etc are all properly installed.
Click to expand...
Click to collapse
I posted because i did what he said..odin not seeing phone now-- probably right on driver issue
ob back phone says 959v
Thanks for help i appreciate it--- THANK YOU- lol back to stock now and back to square one lol
enzodad said:
I posted because i did what he said..odin not seeing phone now-- probably right on driver issue
ob back phone says 959v
I used stock kj6 and t959vukj6_stock Heimdall and nothing happens
Click to expand...
Click to collapse
What do you mean nothing happens?
Does it try and install the drivers for you?
check your dev thread.
I have your solution.
this time it should work.
airfluip1 said:
check your dev thread.
I have your solution.
this time it should work.
Click to expand...
Click to collapse
It did thank YOU!!!!!!!!!!!!!!!!!!!!!!!!! back to 2.3.6 lol stock bs now back to square one----rooting and some how flashing ICS without killing phone
airfluip1 said:
check your dev thread.
I have your solution.
this time it should work.
Click to expand...
Click to collapse
one more thing, i went through the list for dummies and there is no step by step for going from GB to ICS
enzodad said:
It did thank YOU!!!!!!!!!!!!!!!!!!!!!!!!! back to 2.3.6 lol stock bs now back to square one----rooting and some how flashing ICS without killing phone
Click to expand...
Click to collapse
Well flashing the ROM for the RIGHT phone helps. lol.
enzodad said:
one more thing, i went through the list for dummies and there is no step by step for going from GB to ICS
Click to expand...
Click to collapse
Stay on stock. Please. Once you've read EVERYTHING in this forum then, and only then, try flashing your phone.
hechoen said:
Stay on stock. Please. Once you've read EVERYTHING in this forum then, and only then, try flashing your phone.
Click to expand...
Click to collapse
I have been reading- i had a custom GB rom---now just have to try get CWM back on a custom rom then ICS-- sucks compared to my thunderbolt lol
enzodad said:
I have been reading- i had a custom GB rom---now just have to try get CWM back on a custom rom then ICS-- sucks compared to my thunderbolt lol
Click to expand...
Click to collapse
If you were on Vahalla Final,then you had clockwork recovery on your phone
Try the Odin 1 click or Gremlin 1 click and go back to stock.
Your phone does not suck you just cant read and follow instructions.
Go back to thunderbolt they miss you over there
Sent from my SGH-T959V using xda app-developers app
OP if you have solved this please feel free to report the post to a mod and have the thread closed so we can get past people helping you refix it, Furthermore this phone is much easier to root and install a custom rom. However you have to be comfortable using something like heimdall. Furthermore there is a reason Samsung took over as the flagship device from HTC for the nexus devices.

Categories

Resources