SenseLD [Froyo Sense]
Rom is still in BETA mode
Requirements:
96-128mb swap
512mb ext3 or 4
2.22.27.08 - 28.25
1.33.0013d
----------------------------------------------------------------------------------------------------------------------------
Downloads:
SenseLD v0.1 - BETA no wifi, camera or bluetooth
----------------------------------------------------------------------------------------------------------------------------
Installation directions
1. Make backup
2. Flash Ohsaka Superwipe
3. Reboot to recovery
4. Flash SenseLD.zip
5. Reboot & Enjoy
*Wait for lockscreen to show and the screen to sleep, then let it sit for a minute before waking.
----------------------------------------------------------------------------------------------------------------------------
Change Log:
V 0.1
-BETA mode
-Camera dont work
-Wifi dont work
-Bluetooth dont work
-Apps install to sd-ext
-NO MTD needed!!!
WARNING:
-DO NOT unmount sd from device settings
-DO NOT try to change themes untill i have a stable setup wizard
I'll help you. Just gimme a mail
to both of you: My own build is almost done.
to Rush only: I know how to fix "no /etc/mtab", hit me up.
to ldrifta only: rush already has a2sd in his rom, so this is to you: this build NEEDS A2SD!!! don't try to release without (unless it'll be really stripped down.)
Jcarrz1
I already deleted my build. It's annoying to use MTD... I hate that.
jcarrz1 said:
to both of you: My own build is almost done.
to Rush only: I know how to fix "no /etc/mtab", hit me up.
to ldrifta only: rush already has a2sd in his rom, so this is to you: this build NEEDS A2SD!!! don't try to release without (unless it'll be really stripped down.)
Jcarrz1
Click to expand...
Click to collapse
I've been working on a Legend port with mikeyman. How do you make wifi work? Logcat tell us failed to load wifi driver.
Can I use MTD for my htc magic 32b?
Winins said:
Can I use MTD for my htc magic 32b?
Click to expand...
Click to collapse
Yeah, but only if you have installed the AmonRaMTDDREAM recovery not the normal one.
ldrifta! don't you already have a sense ROM?
danthepan124 said:
ldrifta! don't you already have a sense ROM?
Click to expand...
Click to collapse
Let me answer.
YES
But it's 2.1 Droid Eris based and this is 2.2 Legend based.
Answered?
Rushness said:
Let me answer.
YES
But it's 2.1 Droid Eris based and this is 2.2 Legend based.
Answered?
Click to expand...
Click to collapse
lolol yes, he didn't specify which port so I got confused.
@jcarrz1: lol i know man i had to strip it down completely to get the thing to boot, lol i been trying to enable the cacheto sd hack but having some issues on boot... but yes i will need apps2sd without a doubt... thanks for the tip
@nammit: im not sure yet, im going to try messing with wifi once i get apps2sd working.. i haven't really messed with wifi drivers or camera or anything yet.. but you could try using a cm build for the drivers... i used some files from cm6 for the port over.. mine is also legend based, figured would be the best idea lol
my first priority is possibly apps2sd since i have about 15mb available when its completely stripped down
i will post a link up soon if anoe wants to take a look.. could use all the help i can get if you guys dont mind...? im not greedy lol
updated op... my latest test
ldrifta said:
updated op... my latest test
Click to expand...
Click to collapse
feels like christmas is coming extra early in the G1 Dev forum
Downloading test now...
its faaaar from usable.. needs a lot of work lol
we should put all the files on the root of our sd card before flashing right? Because I didnt see any instruction on what to do with "partmaptxt" and I just wanna be sure.
You've become quite the developer lately. Lol Great job!
Sent from my Sidekick 4G using XDA Premium App!
dw9906 said:
You've become quite the developer lately. Lol Great job!
Sent from my Sidekick 4G using XDA Premium App!
Click to expand...
Click to collapse
haha thanks man wouldn't know half the stuff i know if it wasn't for this place!!
@darius99: yes lol place all the files on sd, the mtd remove file is only if you want to get rip of the custom partition layout, so you dont need it untill you decide to do that.
but be sure to follow the steps exactly, be sure to wipe multiple times lol
just flashed and booted.
wifi isnt working and i dont have a file manager so thats basically where my testing ends for now.lol
looking forward to future updates
yeah nothing works lol im trying to fix wifi now, hopefully i can get apps2sd working than i can really start working on this thing
ldrifta said:
yeah nothing works lol im trying to fix wifi now, hopefully i can get apps2sd working than i can really start working on this thing
Click to expand...
Click to collapse
You get those working and I'll jump on the boat testing it. Got to have my wifi and spaces, ya know!
Related
Release Name: Hero Inferno
Release Version: 1
MD5 Sum: 4f6ca15a0d2669f652696bf064a9fa4b
Credits:Haykuro, JAC, Herver, Daproy, all other Hero Dev's
Base Firmware: 1.5
Radio Required: 62.50S.20.17U_2.22.19.26I or higher
SPL Required: Haykuro's Danger SPL
Partition Layout: FAT32 - ext2 (not over 1.5gb) - 32mb Linux-Swap (useless to have more)
Wipe Required: Wipe, Wipe ext
Special instructions: Will take about 5 mins to boot, this is for dexopt.
Download: Hero Inferno v1
Bugs: There is a problem with the ringtones, when you flash this rom, the folder where the default ringtones are supposed to be gets renamed. Im working on a fix now, I just figured I'd release this beast for the masses.
I am open for suggestions for improvement. This is not an area for criticism of flaming, that will not be tolerated. It only takes one person to ruin this for everyone. If you enjoy the ROM, then please rate it well, if you don't please make a suggestion to make it better. Other than that, do not get off topic and I will answer most of your guy's questions.
Oh, and I almost forgot, this is a G1 forum. I do not want to hear anything about the Magic and whether or not this will work. Wrong place to ask, I believe there is a Magic forum for that!
Enjoy
adewey234 said:
Release Name: Hero Inferno
Release Version: 1
MD5 Sum: 4f6ca15a0d2669f652696bf064a9fa4b
Credits:Haykuro, JAC, Herver, Daproy, all other Hero Dev's
Base Firmware: 1.5
Radio Required: 62.50S.20.17U_2.22.19.26I
SPL Required: Haykuro's Danger SPL
Partition Layout: FAT32 - ext2 (not over 1.5gb) - 32mb Linux-Swap (useless to have more)
Wipe Required: Wipe, Wipe ext
Special instructions: Will take about 5 mins to boot, this is for dexopt.
Download: Hero Inferno v1
Bugs: There is a problem with the ringtones, when you flash this rom, the folder where the default ringtones are supposed to be gets renamed. Im working on a fix now, I just figured I'd release this beast for the masses.
I am open for suggestions for improvement. This is not an area for criticism of flaming, that will not be tolerated. It only takes one person to ruin this for everyone. If you enjoy the ROM, then please rate it well, if you don't please make a suggestion to make it better. Other than that, do not get off topic and I will answer most of your guy's questions.
Oh, and I almost forgot, this is a G1 forum. I do not want to hear anything about the Magic and whether or not this will work. Wrong place to ask, I believe there is a Magic forum for that!
Enjoy
Click to expand...
Click to collapse
Hoping this is good. Better than previous Roms im sure.
Not to be offensive
Shatterv2 said:
Hoping this is good. Better than previous Roms im sure.
Click to expand...
Click to collapse
Im pretty sure u'll approve...
adewey234 said:
Im pretty sure u'll approve...
Click to expand...
Click to collapse
Flashing it a bit just going to open up the rom and check the user file and some other things of interest.
The challenge is on
Revolution 2.2 was one the most stable and fastest hero roms I've used. Let's see if this one can beat it.Good to see you back Alex.
adewey234 said:
Im pretty sure u'll approve...
Click to expand...
Click to collapse
Made a custom user.conf and everything seems much smoother, would you like to try it?
Ill have to add in the wallpapers i guess
Shatterv2 said:
Made a custom user.conf and everything seems much smoother, would you like to try it?
Ill have to add in the wallpapers i guess
Click to expand...
Click to collapse
Sure, pm it to me and ill check it out? R u talking about the stock wallpapers? I'll put those back in if ppl want. ..
adewey234 said:
Sure, pm it to me and ill check it out? R u talking about the stock wallpapers? I'll put those back in if ppl want. ..
Click to expand...
Click to collapse
That would be great .
Uploading it now pm you in a sec
Shatterv2 said:
That would be great .
Uploading it now pm you in a sec
Click to expand...
Click to collapse
mind sharing this with me??
btw, I got blur screen after wake-up...???
looks pretty good! But it's 1.5 :-( i use 2.0 or 2.1 i am done with 1.5!
i hope you update
x1tyme said:
mind sharing this with me??
btw, I got blur screen after wake-up...???
Click to expand...
Click to collapse
http://www.mediafire.com/?tdj3ezztmjn
@Wm Manu
He dosent have a build yet.
Just wondering why you chose 1.5 over 1.6?
As most roms are 1.6 or 2 (don't use personally. Need camera) seems strange to me to flash an older firmware.
Was wondering how long you would go dark, does this need swap or can it work with just compache?
shadowch31 said:
Just wondering why you chose 1.5 over 1.6?
As most roms are 1.6 or 2 (don't use personally. Need camera) seems strange to me to flash an older firmware.
Click to expand...
Click to collapse
So this rom doesn't include a working camera?
AP0ll0UK said:
So this rom doesn't include a working camera?
Click to expand...
Click to collapse
This has a working camera....This is donut cupcake hero not eclair....So camera is running only eclair doesnt have it working.
shadowch31 said:
Just wondering why you chose 1.5 over 1.6?
As most roms are 1.6 or 2 (don't use personally. Need camera) seems strange to me to flash an older firmware.
Click to expand...
Click to collapse
Hero doesn't come in a 1.6 version.
And since HTC STILL hasn't released the drivers for 2.+ that are compatable with the G1 it seems logical to use 1.5
Functionality > Features
holysmokesbatty said:
Hero doesn't come in a 1.6 version.
And since HTC STILL hasn't released the drivers for 2.+ that are compatable with the G1 it seems logical to use 1.5
Functionality > Features
Click to expand...
Click to collapse
They most likely wont, but tmo is releasing 2.0 for g1 so drivers will be avail before February assuming devs will continue to support G1...Eugene has a droid,manup a mytouch, maxisma a liquid..Some devs are upgrading their phones which was my point, if they stay with G1 that would be nice. But we'll still have cyan for custom roms.
is anyone else getting a boot loop of the android? i have wiped everything and installed twice. but still keep getting the loop.
domex2k said:
is anyone else getting a boot loop of the android? i have wiped everything and installed twice. but still keep getting the loop.
Click to expand...
Click to collapse
You need:
1.Haykuro spl
2.Ext 3/4
3. linux swap 32mb
It works for me
does this work on Mytouch 3G?
Using dsixda's rom kitchen and with some trial and error with a few other roms I ran into some luck with KiNgxKxROM Sense Hybrid v2.3.
It's a bit of a pain to get past the setup screen (or at least for me) so you just have to have some patience.
What doesn't work:
Wi-Fi (I need someone with some experience to help with that if you don't mind)
Camera
Anything else that we might discover
What this does have:
It should have everything that the original rom has
Bluetooth works
Multitouch browser
Anything else that we might discover
Requirements
A rooted MyTouch 1.2 device (duh!)
SDCARD with fat/swap/ext3 partition (not sure if 2 or 4 works... haven't tested. Let me know)
A complete wipe (dalvik-cache, data, ext partiton)
A little patience.
I had it freeze up a couple of times on me so this is far from perfect but it might be a start to someone that wants to rip it apart and try it for themselves, upload it and I'll update the link for a more perfected version.
And please don't ask:
[Q] "Why are you posting a Cupcake 1.5 rom up when we're expecting Eclair at anytime now?"
[A] Because it just so happened to work. Okay?
But therein may lay the problem with the stability. A 1.6 kernel with a 1.5 rom would very likely tend to cause some issues... but I don't think it's half bad since it's my first ported rom.
So if any mouth-breathers wants to get all hyper about this not being perfect release I'll invite you to give it a shot. I intend on experimenting with more to see what I can get to work. In the meantime, this is a start I think.
I'm hoping that someone can help me figure out the wifi and camera issues so that we can have this closer to completion. Other than those I think this is pretty much finished. Unless someone discovers something that I didn't with my entire 15 minutes of playing around with it.
Click the disclaimer below to download.
Enjoy!
"I accept the fact that if I do not know what I am doing or how to apply this rom then I will research first before asking any questions and will in no way shape or form hold anyone with the exception of myself liable for any damages that which may occur. I understand that I should do a backup prior to clicking and downloading any links and files within this post. I also understand that I am chosing on my own will to continue at my own risk."
reserved
reserved for future use
reserved for future use
ill give it a shot
oreddy32 said:
ill give it a shot
Click to expand...
Click to collapse
Thanks! Let me know if you can help me out with working out the kinks.
I'm trying a few more too.
extremely laggy but for a first it works
visualkei94 said:
extremely laggy but for a first it works
Click to expand...
Click to collapse
Most Hero roms are pretty laggy. You have to enable swap to get it to smooth out. I'm playing with a few more right now. I'm trying to find a decent 1.6 and 2.1 Hero roms that work.
alright i enable swap its some wat smoother but still alittle buggy i think its because of the kernel
visualkei94 said:
alright i enable swap its some wat smoother but still alittle buggy i think its because of the kernel
Click to expand...
Click to collapse
Pretty likely. It's open for improvement.
i got the wifi working on it but then the touch screen doesnt work
visualkei94 said:
i got the wifi working on it but then the touch screen doesnt work
Click to expand...
Click to collapse
What did you do for the wifi to work?
i flashed the deport 1.0 from here (http://twistedumbrella.slackdev.com/Deport-1.0.zip)
Downloading now...
if u can edit it to get the touchscreen to work for the mytouch le it would be great!!!!
visualkei94 said:
if u can edit it to get the touchscreen to work for the mytouch le it would be great!!!!
Click to expand...
Click to collapse
Okay... the reason why the touchscreen doesn't work is because there is a boot.img in that zip file. Inside the boot.img is the kernel which allows the wlan.ko for the wi-fi to operate. Even if I was to just use those files (that is without the boot.img) it still more than likely won't work. It would likely bare the same results. Does your bluetooth work still?
yup works 100% percent ill try to edit the port so the touchscreen works, if i have any sucess ill tell u
visualkei94 said:
yup works 100% percent ill try to edit the port so the touchscreen works, if i have any sucess ill tell u
Click to expand...
Click to collapse
Thanks. Good luck. I'm busy working on other roms. I have a total of eight to test out finished.
I love Sense UI, so this ROM is awesome. The camera and wifi working would be a plus, but it's still pretty solid. Thanks Binary 100100!
C0dy said:
I love Sense UI, so this ROM is awesome. The camera and wifi working would be a plus, but it's still pretty solid. Thanks Binary 100100!
Click to expand...
Click to collapse
I have another one that I'm working the kinks out with. It's the Eris rom ported. Camera works, bluetooth doesn't. It's always something isn't it? LOL. But it's a good start.
visualkei94 said:
i flashed the deport 1.0 from here (http://twistedumbrella.slackdev.com/Deport-1.0.zip)
Click to expand...
Click to collapse
Your problem is that the Deport file is a kernel. So you are flashing a non working kernel over our working kernel. Thats why there is no touch. To get the wifi working you gota push a wlan file from another rom.. but then it normaly takes out bluetooth.
EDIT- Ooops.. Its a 1.5 rom.. Think Ill say NEY lol
Well its that time. I'm releasing a Eris/Hero ROM. Presenting BiffHero Beta2, there was a beta1, it was broke . This is based off of Kingklick92's Eris2g1. I removed some things that didn't need to be there (bluetooth and stock.apk) I also replaced the google apps with the CM5 build and replaced the kernel with the latest CM kernel (including low mem killer patches, 576mhz overclock etc). Also added a better boot animation. Gotta say, this thing is fast. I'm quite impressed. Please see the credits and post boot setup below. Please not this is very much a work in progress. IF ANYONE CAN GET GOOGLE TO SYNC, YOU WOULD BE MY "HERO"
I'm not a dev, nor do I claim to be. Anyone could do what i'm doing, i'm just choosing to share it. If your phone explodes... NOT IT
Credits- Cyanogen, KingKlick, Pershoot, Silent8Strike, HTC, Google, The internets
WHAT WORKS
----------------
*WIFI
*Camera
*GPS
*Facebook
*Calls
*SMS
*Internets
WHAT DOESN'T
----------------
*Gapps (they're there, but for some reason it won't sync with google. Can't figure it out right now )
*Bluetooh
*CAMCORDER
*twitter (took it out on purpose)
DOWNLOAD BETA2 HERE >>>>>>>>>>>>>>>>http://fromhindsight.com/?page_id=45
Post boot setup
--------------------
Let it sit for 15min before you touch it. thats it for now
If you like my "work" buy cyanogen or anyone on his team a beer... you're free to visit any of the ad sponsors on my site as well.
Thanks to the community for putting up with mah "devvin"
awesome..... m gonna try this soooooon on my G1...!!!
Will definitely give this a try, Biff.
----------------------------------
[UPDATE]
Not bad, Biff! This is by far the most usable 2.1 Hero ROM I have used on the MyTouch. The speed certainly surpasses that of most ported Hero roms. I'm not one to do video reviews or anything, but maybe once we get GAPPS working I can do a write up review with screenies.
Wish I could help you with syncing the GAPPS, but don't have the knowledge or time to spend on it (especially while sitting here at work! )
I'm looking forward to the development of this ROM. It would be awesome to have a *real, fast and stable* hero ROM.
* Gapps
*Bluetooh
*CAMCORDER
Not working, no thanks, will wait.
Have u tried ext2/3/4 for google apps
Thats pretfy much a requirement on sense roms on g1 nowadays
Sent from my Htcclay's Superfly G1 using XDA App
Decided to try it, , flashed 4 times already, still can't get past the splash screen
i've wiped via fastboot (fastboot erase system-w)
repartioned: 160/640 on 8GB class6
wiped 5 in 1.70G recovery
flashed, still nothing.
Screw this ROM
alnzbail said:
Have u tried ext2/3/4 for google apps
Thats pretfy much a requirement on sense roms on g1 nowadays
Click to expand...
Click to collapse
I tried upgrading to ext4 and reflashed. Still a no-go for GAPPS. It gives the error that it "Can't establish a reliable data connection to the server." Even though I'm attempting sync over wifi..
Could it be because he replaced the gapps with the cm5 build?
Sent from my Htcclay's Superfly 3G using XDA App
smjfosho said:
Could it be because he replaced the gapps with the cm5 build?
Sent from my Htcclay's Superfly 3G using XDA App
Click to expand...
Click to collapse
Could be. Reflashing CM5 GAPPS didn't help either.
best hero rom ive ever ran just cant log-in my gmail to syc contacts and all but it runs the best out of all hero roms ive tried! good job!
ripgut said:
* Gapps
*Bluetooh
*CAMCORDER
Not working, no thanks, will wait.
Click to expand...
Click to collapse
I second that....no Gapps...no need to waste my time flashing this
i played around with this its nice and fast but the no gapps is killing me so im going back to something else
ripgut said:
Decided to try it, , flashed 4 times already, still can't get past the splash screen
i've wiped via fastboot (fastboot erase system-w)
repartioned: 160/640 on 8GB class6
wiped 5 in 1.70G recovery
flashed, still nothing.
Screw this ROM
Click to expand...
Click to collapse
first off what phone are you useing?
jacsonmoore3 said:
I second that....no Gapps...no need to waste my time flashing this
Click to expand...
Click to collapse
also if you guys really want to try this rom with gapps flash KiNgxKxlick-Espresso2G1-v1.3 and then when it finishes booting go back to recovery and then wipe everything but sd card ext partition and then flash this rom and you will have working gapps
also to anyone getting mad with this rom its a beta meaning not everything is gonna work this is still in testing so give it some time but so far this is the fastest sense rom out there
yohshua said:
also to anyone getting mad with this rom its a beta meaning not everything is gonna work this is still in testing so give it some time but so far this is the fastest sense rom out there
Click to expand...
Click to collapse
Hear hear.
KUMON HERO DEVs
Biff...I have a blk G1 n absolutely need my LEDs Bro!
N pls dont refer me to heroLED-Free from market
Since When?
Devs puttin outdate apps in with there "cherished" builds...r u for real...thats like buying an eclair or froyo with expired ingredients man!!! stop it!!!! just dont include the damn thing!
Hey guys,
this sounds quite interesting, since i like the sense framework.
Could someone try to install flash lite:
apk is here: http://www.mediafire.com/?ix2iwdm4otl
(found on http://androidforums.com/motorola-droid/67244-flash-player-flash-lite-apks.html)
We know flash 10.1 wont work ... but since flash lite worked on the donut hero roms, maybe this one runs also.
Cheers
tomatoe
Noxxolous said:
Devs puttin outdate apps in with there "cherished" builds...r u for real...thats like buying an eclair or froyo with expired ingredients man!!! stop it!!!! just dont include the damn thing!
Click to expand...
Click to collapse
Good thing I'm not a Dev then feel free to download another ROM if you don't like this one... also see BETA tag in topic... kthnxbye
Noxxolous said:
Devs puttin outdate apps in with there "cherished" builds...r u for real...thats like buying an eclair or froyo with expired ingredients man!!! stop it!!!! just dont include the damn thing!
Click to expand...
Click to collapse
useless post lol ...
---
i gave ur rom a try ... flash worked for me out-of-the-box ... seems like flash lite is already implementet in that eris rom. Great! gaaps forced closed for me and camera preview pic is gropped.
Biff, I am so mad that you dont have every single thing working in this rom, if its not fixed in the next 20 minutes i am not going to use it anymore and i know how sad you would be about that. Haha come on guys! Biff is doing this for fun, and obviously its not done yet. SO QUIT *****ING! He doesnt have to do this for anyone (including his perfectly working Froyo ROM) like he said, if you dont like it, go somewhere else. HE NEVER SAID GAPPS WERE WORKING!
P.S Hey Biff, Gapps arent working
2 METHODS OF PORTING BELOW posted by INCDOES
MANUAL
(FOLLOWING THE GUIDE BELOW)
&
INCDOES PORTING PATCH
(EVERYTHING YOU NEED IN A ZIP)=much easier,should be the obvious choice for most...
USE THE METHOD THAT SUITS YOUR NEEDS...
UPDATE:To avoid confusion, this thread was started before the porting patch was released...i chose to leave the MANUAL directions below posted on incdoes blog for those of us that like to know whats going on behind the scenes of the updater.script=what the patch is doing
UPDATE:
found this on twitter a bit ago...
(courtesy of incdoes)
CHECK OUT THE INCDOES INC 2 EVO PORTING PATCH
CAUTION:
This is not recommended for the ave everday user/know nothing/no time to fudge with my phone crowd...
that being said, now for the fun stuff
i take no credit for any of this other than typing(incdoes leaked most of these port bases). i am just posting links to roms i found in inc forum with the instructions for porting to evo from incs blog. just trying to initiate some more rom development. i am still trying to decide which i will be working on...but this is open source so i just put it here for evo users/devs to view and get porting
ROMS:
DESIRE Z
MT4G
LIquiDsENsE
(hybrid by mmmark111)
HOW TO PORT INC ROM TO EVO
-excerpt from incdoes blog-
Okay, to run an INC ROM on your EVO would be simple. There will be a few broken 'stuff' e.g. bt, wifi etc... but easy fixes!
First you will need the INC ROM you desire to run on your EVO. Now, if its an "INC Sense ROM" you will need a "EVO Sense Kernel" and if it's an AOSP ROM then you will need a AOSP kernel.
Now there will be a few things you will need to replace on the INC ROM to make it run on your EVO:
~We are going to use a sense 2.2 rom as an example~
"so grab these files from any EVO sense ROM, preferable stock 2.2 EVO"
- boot.img (for your phone to bootup)
- system/usr (for buttons)
- system/lib/hw (for lights)
- system/lib/modules (for wifi)
- system/etc/vold.stab (for sdcard readable)
- build.prop (for market and LED's fix)
please note: some prop files include different edits that can break market/data/network/LED's... but then again, easy fixes!
Now you have an INC Sense ROM and 'all the files listed above pulled from an EVO Sense rom, you will have to add/replace the files pulled from the EVO ROM into the INC ROM, sign the .zip and flash (via recovery).
Should/will bootup if its based on the same firmware i.e. 2.2 INC ROM and 2.2 EVO ROM.
DISCLAIMER:
I am not responsible for you bricking your wife's/son's/boss's/aunt's/grandpa's/girlfriend's/fiance's/mother's/etc....evo
good porting
&
happy flashing
THANK YOU
sorry mods if this doesnt qualify as dev, but i cant think of anything describing it better​
Nice post(s) mannn!!
too cool-- if i get time i'll definitely go thru this. Thanks!
Thanks. Going to be fun
Sent from my PC36100 using XDA App
I just have one question. So why can't we get the camera to work?
Sorry I'm thinking of the desire roms my bad..
Nice, I'm gonna play with this over the weekend!! Just hope I dont brick my phone
stanglifemike said:
Nice, I'm gonna play with this over the weekend!! Just hope I dont brick my phone
Click to expand...
Click to collapse
You can wait till the weekend, you've got patients man ..
Wonder if this process can be used to port nexus roms?
Probly a couple other things needed.
I had a idea, the Incredible version of the normal LiquidE ROM (not the sense hybrid) seems to have incoming calls working unlike our Evo version. What if we tried porting it using this method, anyone think that might work?
KERKEDAGAIN said:
Nice post(s) mannn!!
Click to expand...
Click to collapse
mkeena0305 said:
Thanks. Going to be fun
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
fun indeed...
stanglifemike said:
Nice, I'm gonna play with this over the weekend!! Just hope I dont brick my phone
Click to expand...
Click to collapse
i have faith in you
Igotsanevo4g said:
Wonder if this process can be used to port nexus roms?
Probly a couple other things needed.
Click to expand...
Click to collapse
you can try and post back. results would be appreciated.
crpercodani said:
I had a idea, the Incredible version of the normal LiquidE ROM (not the sense hybrid) seems to have incoming calls working unlike our Evo version. What if we tried porting it using this method, anyone think that might work?
Click to expand...
Click to collapse
this is dev, just like any here i put it up for you to try this out yourself(opensourcewin)...let us know how it goes, this is simple please report findings. this could turn into a sweet beta rom thread with a little help...
MagnusRagnarok said:
you can try and post back. results would be appreciated.
.
Click to expand...
Click to collapse
Gonna try, tonight or tomorrow. Fingers crossed...
Edit: I realized the boot.img would be for a sense rom, and nexus is aosp. So i can rip the boot.img from cyanogen out and stick it in the nexus rom and it'll purr?
Or... What?
zone23 said:
You can wait till the weekend, you've got patients man ..
Click to expand...
Click to collapse
OHHH I wish I had patients!! Quite the opposite actually.....just a really busy life.....but I may try to start tonight anyway .
So im flashing a nexus rom right now, that i switched out all the stuff + threw in a cyanogen kernel.
If this thing bricks...
___________
UPDATE: It booted up, but it doesnt register any touch on the touch screen. LOL.
Hmmm maybe if.. Any ideas guys? I switch some other stuff around too. Maybe i can figure this out...
UPDATE: I flashed netarchy universal kernel and now the touch works, i cant get any signal, i dunno what stuff needs to be switch out from GSM to CDMA.
Wifi WORKS! I dont have a keyboard for some reason, so i cant enter my password to test it but it looks to be fine. And since i have no internet connection i cant get astro to install one from my SD haha.
I flashed over sky raider 3.3 final and every thing is perfect. Theres a uncommon sense patch which I also ported because I remember reading that on the hd Rom the ego didn't like the 4 signal bars. Only thing not exactly right is the camera. It doesn't have the capture button but I can take pics by holding a finger on the screen. Video is a no go due to not having the nature button. This Rom is the smoothest I've used and I'm a flash a holic so I've used them all.
So if I use the flash patch do I need to do any of the other stuff listed in the op(replacing files)?
Sweet Magnus, may have to get back to you details of what i find wrong. But i got a porject due next week for school. I have to record us BMXing this weekend. Then make an edit. If i get that sweet alone time in the eveing, i'll be sure happy to port all three and give findings.
Everyone can check my original post, made this about Monday, September 27, 2010
ID
http://incredibledoes.blogspot.com/2010/09/how-2-inc-roms-one-evo.html
Tiffany84 said:
So if I use the flash patch do I need to do any of the other stuff listed in the op(replacing files)?
Click to expand...
Click to collapse
My flashpatch is the same thing,
This post is what i dont want to happen, like i said before there is no point in repacking a whole new zip file when we can just have a flash over patch zip that does all the work for us.
ID
IncredibleDoes said:
My flashpatch is the same thing,
This post is what i dont want to happen, like i said before there is no point in repacking a whole new zip file when we can just have a flash over patch zip that does all the work for us.
ID
Click to expand...
Click to collapse
That really saves a lot of time. Going to give it a test.
Sent from my PC36100 using XDA App
AWESOME! Thank u very much
From the HTC Marvel/Wildfire S
Advantages
theme changable sense
gingerbread base (good and bad)
great potential
HVGA
cool new HTC apps
pretty
So my progress. So far i've downloaded a dump and began porting. but I need help. This is going to be harder than the Froyo Sense that I was the first to port before; it's a huge package and it's a pain to fanaggle onto the limited available memory on the G1.
I'd like help specifically from the up-and-coming devs as well as xillius2000 (sorry if spelling wrong) because you guys have specific experience. Yoshua is good with kernels. (again sorry for spelling)
Please help. this can be awesome. Here are some teaser images from the rom. and a link to the dump.
http://www.morninglion.com/tp2martin/Marvel_Dump.zip
UPDATED THANKS TO E334
e334 said:
Test9_GB updated, MOST apps are included now (Minus facebook, twitter, flickr). First boot will take a very long time because the setup screen takes forever to load. Maybe its because I have a slow sdcard but it will take much longer than usual. It may seem like the build is broken but it isn't, it WILL load but just takes a long time Once everything finishes loading and you completed setup and homescreen is loaded, reboot (I did it two times). I also recommend downloading SetCPU.
Other things I have updated:
-framework is now squashed
-fonts is now squashed
-xbin is now squashed
-build.prop updated
-framework and odexed apps updated from sFM 0.30
Working:
-Wifi
-Data
-sensors (rotate)
-Superuser/su
Not Working
-Camera
-Bluetooth
-GPS?
Note that performance will be affected by the class sdcard you have. The higher the class the better of course Swap is set at 50, and Compcache (CC) at none. Default cpu settings are the same as previous builds: 480-614 ondemand.
http://ge.tt/2qyfLks?c (Test9_GB-full)
installation instructions (pretty much the same as before)
1) Flash Superwipe V2 (or just fastboot erase system -w)
2) flash rom
3) flash kernel (.12 farmatito kernel recommended)
4) reboot, and then wait
Click to expand...
Click to collapse
test 10 coming soon
cant wait for the release candidates . i wanna try this rom once available
Waiting.. I've already connected my Phone to PC.. Lol.
Looks great. Thanks
Hmm interesting, The infinimod team and I will be working on 2.2 Sense Froyo
I suggest moving a lot of apps to /data/ (add apps to sd also or it will not fit on device even on data!) and using CustomMTD Partitions such as "mtd 180 2" (crazy partitions anyone?)
What help do u need ?
Will tihs rom work with 2708
Sent from my Gingerbread on Sapphire using XDA App
we can't wait.....
Sent from my HTC Magic/Dream using the XDA mobile application powered by Tapatalk
Is there any chance, to have in this ROM working bt?
Great news!!!!!!!!!!!!!!!!!! Keep your work up!!!!!!!!!!
woooow . please remember sapphire 32a
Sent from my Gingerbread on Sapphire using Tapatalk
fonsigno said:
woooow . please remember sapphire 32a
Sent from my Gingerbread on Sapphire using Tapatalk
Click to expand...
Click to collapse
anything that works on the g1 will work with 32a's with the right kernel.
i cant wait to see this working... =]
@Original Poster please list the following in the original post if youd be so kind
What SPL/Radio/kernel is required?
how does the SD need to be formatted?
what apps are already in the rom?
what works and what doesnt?
a changelog would be nice also =]
im gonna nandroid and attempt a flash with the setup listed in my sig.
edit: installation aborted. package not signed. =\
BuddhaTeh1337 said:
anything that works on the g1 will work with 32a's with the right kernel.
i cant wait to see this working... =]
@Original Poster please list the following in the original post if youd be so kind
What SPL/Radio/kernel is required?
how does the SD need to be formatted?
what apps are already in the rom?
what works and what doesnt?
a changelog would be nice also =]
im gonna nandroid and attempt a flash with the setup listed in my sig.
edit: installation aborted. package not signed. =\
Click to expand...
Click to collapse
It'd probably work better if you waited for there to be more than a dump. This is NOT a ROM...
JAguirre1231 said:
It'd probably work better if you waited for there to be more than a dump. This is NOT a ROM...
Click to expand...
Click to collapse
haha, yeah. don't flash this.
Hi jcarz ! I'm already working on a Froyo Sense, but I'll take a look to this one !
[edit]
This ROM isn't rooted...any help ?
Can't wait for this rom to start developing
Sent from my HTC Magic/Dream using XDA App
Artifex14 said:
Hi jcarz ! I'm already working on a Froyo Sense, but I'll take a look to this one !
[edit]
This ROM isn't rooted...any help ?
Click to expand...
Click to collapse
Add "su" to bin and "superuser.apk" to apps
In update-script (I hope you're using this), add:
set_perm 0 0 06755 SYSTEM:bin/su
symlink /system/bin/su SYSTEM:xbin/su
(or symlink it manually in linux with:
sl -s <dir>/system/bin/su <dir>/system/xbin/su
Here is what I have so far for a 2.2 Port from HTC Liberty, I always get stuck on:
"run_program PACKAGE:installbusybox" no matter what I do, Here is the download to the rom, you can attempt flashing but it WILL not fully install because you will get error at line 82..
Download: http://ge.tt/22w8fdV
So far, I have
-included .11 pershoot's kernel (non 2708)
-fixed some "errors" in update-script
-moved heaps of apps to data (to be moved to ext on boot)
-spent a few good solid hours flashing and testing this rom with no progress and messing with update-script. I can give download to original update-script if you want
You will need Custom MTD by firerat with "mtd 200 2" (yaa fat system partition, everything else on ext)
I'd like to test this ROM!
Sent from my HTC Vision using XDA App
Hey man looks great!! As far as Xillius200 and the Yoshi team helping out, you might have to ask them personally via email.. I know Xillius has stalled development on his slide ROM bc of school and the rest of the Yoshi team are busy porting over a Honeycomb ROM atm. But GOOD LUCK!! Will definitely test out!
i've done it!!! gingerbread sense on the g1.
Its fast. Unfortunately, though, the home keeps quitting due to no swap. I'm trying to fix it.
Themes work, but i've removed them for performance.
I will make video if demanded to.