Related
I've seen one or two screen protectors that are pictured to fit the N1, but before I go order one, I want to make sure I can't smudge and scratch it up.
I have for my MT3G the PowerSupportUSA.com screen protector for the G1, and it's served me well.
Is there anything similar or better planned soon for the Nexus?
Praxisi said:
I've seen one or two screen protectors that are pictured to fit the N1, but before I go order one, I want to make sure I can't smudge and scratch it up.
I have for my MT3G the PowerSupportUSA.com screen protector for the G1, and it's served me well.
Is there anything similar or better planned soon for the Nexus?
Click to expand...
Click to collapse
+1. I hate to post just to say +1 but I too am in need of a screen protector. If anyone has any info on any good ones, please post. As soon as a few debut I will try different ones and hopefully remember to post results here. Also, you might want to keep an eye on http://www.seidioonline.com/ as they are getting ready to sell some N1 products. They are usually overpriced but they spawn ideas so people can cheaply copy them.
Does it not come with a protector in the box? Like the G1?
No. I was disappointed it did not come with a screen protector. I ordered a kit from amazon "Skinomi TechSkin - Invisible Cell Phone Protector Shield Full Body Skin for Nexus One - Plus LIFETIME REPLACEMENTS"
Wireless Phone Accessory;
$18.95
Free shipping.
Zagg is taking preorders for the InvisibleShield -- ships approx 1/08:
http://www.zagg.com/invisibleshield...es-screen-protectors-covers-skins-shields.php
I've never had experience with the invisibleShield line. Does anyone have any comparisons to the non-smudge/non-glare ones from powersupportusa.com referenced in my op? In order of most to least necessary, I'd like to see these qualities
1. Smudge and fingerprint proof
2. Static cling rather than adhesive backed
3. Can take a bullet to protect the screen (at least be scratch resistant)
4. glare reduction
5. Looks good.
I've not yet been able to sell my MT3G, but when I do I'm very hopeful I can buy both the screen guards, case, and phone on the same day.
Does the phone at least have a protective film that you have to peal off before you make calls or something?
Praxisi said:
Does the phone at least have a protective film that you have to peal off before you make calls or something?
Click to expand...
Click to collapse
Not that you would be able to leave on.
Praxisi said:
I've never had experience with the invisibleShield line. Does anyone have any comparisons to the non-smudge/non-glare ones from powersupportusa.com referenced in my op? In order of most to least necessary, I'd like to see these qualities
1. Smudge and fingerprint proof
2. Static cling rather than adhesive backed
3. Can take a bullet to protect the screen (at least be scratch resistant)
4. glare reduction
5. Looks good.
I've not yet been able to sell my MT3G, but when I do I'm very hopeful I can buy both the screen guards, case, and phone on the same day.
Does the phone at least have a protective film that you have to peal off before you make calls or something?
Click to expand...
Click to collapse
I've had both the Zagg (and InvisibleShield and ClearProtector and whatnot.. they're almost the same when used on the screen) and PowerSupport anti-glare ones. I'll rate it JUST FOR THE SCREEN:
1. Zagg is somewhat fingerprint proof on the screen (better than a bare screen), but too far off from the anti-glare protectors. No comparison here, anti-glare wins.
2. Zagg is adhesive based (you need to wet it with a solution to apply). Only regular screen protectors (including anti-glare ones) are static cling.
3. Ah ha, here is what the Zagg-type stuff wins. Just view the Zagg videos and you will see they are a lot stronger than a hard plastic film. Scratch-resistant-wise, I find they both do the job well enough.
4. Zagg is somewhat anti-glare, because the surface is not even. But the "bumps" are a lot bigger/coarser than anti-glare screen protectors (like PowerSupport). Zagg-type stuff is still shiny while anti-glare ones are matte. So the anti-glare property is a lot better on (gasp,) the anti-glare screen protectors.
5. Appearance wise, it depends on what you like. The anti-glare screen protectors dim/distort the screen a bit, while the Zagg-type stuff preserves the colors better. However, the Zagg stuff has an "orange-peel" look due to the bumps, while the anti-glare protectors look smooth.
Personally, I use Zagg-type skins for the body, and an anti-glare screen protector on the screen.
And I want to add that my Zagg-type skin is peeling off my Magic (since day 5 or so?!), while my anti-glare screen protector recently has a tiny dent. Both are not bullet-proof.
Anyone Looking for Nexus One Screen Protectors?
You can purchase one from
http://www.googlenexusoneaccessories.com/
or here
http://www.talkietech.com/goneoneac.html
I just received mine from Talkietech and i'm about to install the full body protector. I'll let you know how it goes.
yellowlaser said:
http://www.talkietech.com/goneoneac.html
Click to expand...
Click to collapse
I found a 15% discount code that worked for my order: hfmembers
I ordered the clear silicone protector, a motorola rapid car charger, and the skinomi protector. I'll report back how everything goes.
I just pre-ordered the Zagg Screen protector only. I had one of the whole body clear skin things from Zagg for my G1... and I did not like how it made the phone look, and how it felt.
I do however, really like their screen protectors. You cannot mar them what-so-ever. The only thing I would stress is taking your time applying it to the screen. Make sure that sonovagun has a lot of the solution Zagg provides, and get all the air bubbles out.
I think a nice silicon case (hoping for a Blody Glove) for the Nexus will be a nice fit for this phone... the G1 as always cumbersome due to the sliding keyboard. Every case for it came in 3 parts.
I just got word from Martin Fields (overlayplus.com) that they have a Nexus One on order and expect to offer screen protectors in a week or so. They usually include a camera protector too.
How is the glass screen on a stock Nexus? Is it easily scratch-able? Is it even glass?
Wish it was Gorilla Glass, would solve a lot of problems
coolbho3000 said:
How is the glass screen on a stock Nexus? Is it easily scratch-able? Is it even glass?
Click to expand...
Click to collapse
Yes, it is glass. Does it matter how easy it is to scratch? It's possible to scratch it. If you put a protector on it, it's just a few bucks to replace if it gets messed up and it's peace of mind...
I ordered a screen protector from clearfreakmobile on ebay. It's an invisibleshield type (have to use water), but it looks fine. I never liked the full body kind as the little pieces keep coming off in my pockets. Should hopefully get it late next week.
i'll prolly check out martin fields when they start shipping them.
I still swear by naked cases they are awesome. Patiently waiting for a nexus one!
Nothing beats powersupport anti-glare. I custom cut these for my car navigation, digital camera, and all my phones. but nexus got a big ass screen and custom cutting wont work
I'm digging the Clear Protector (which, again, is the same as Zagg and Ghost Armor). It actually gets completely smooth over time and the orange peel effect becomes less noticeable. It also starts off with a little more friction on swipes than I like, but that is fixed over time as well.
Wondering if anyone has picked up a nice anti-glare protector? Thinking of ordering the ones from E-Cell on eBay, but the previous protectors I got from them were not too impressive. One came stained brown, and the one I applied made it hard to slide smoothly across screen. Wasn't a perfect fit and speaker / Windows button cutouts looked pretty shoddy, but at least it gave full coverage (most eBay protectors have huge cutouts at top / bottom).
tye to search feyong screen protector, you will find the manufacturer
I'm using Vikuiti screen protector ADQC27, and its great.
Saw this for sale at a local Cell phone shop but they were asking $40 for it, checks online don't show any better of a price.
My question is, Is this particular screen protector worth it over the $5-6 ones i can find online?
Amazon link: http://www.amazon.com/Patchworks-Co...ie=UTF8&qid=1383597578&sr=1-2&keywords=usg+s4
icewolf293 said:
Saw this for sale at a local Cell phone shop but they were asking $40 for it, checks online don't show any better of a price.
My question is, Is this particular screen protector worth it over the $5-6 ones i can find online?
Amazon link: http://www.amazon.com/Patchworks-Co...ie=UTF8&qid=1383597578&sr=1-2&keywords=usg+s4
Click to expand...
Click to collapse
Nope. Not worth the extra coin.
icewolf293 said:
Saw this for sale at a local Cell phone shop but they were asking $40 for it, checks online don't show any better of a price.
My question is, Is this particular screen protector worth it over the $5-6 ones i can find online?
Amazon link: http://www.amazon.com/Patchworks-Co...ie=UTF8&qid=1383597578&sr=1-2&keywords=usg+s4
Click to expand...
Click to collapse
i think you are mistaken for a plastic screen protector vs tempered glass. Tempered glass protectors usually run around the price you see on amazon ( i have yet to find a reliable tempered glass protector for under $10 not talking about chinese knock-offs).
The one you posted from amazon is .4mm which is significantly thick and you will feel that you are touching an extra piece of glass. There are better ones out for a lower price (.15mm is the thinnest glass protector i know of from Spigen).
jax5ter said:
i think you are mistaken for a plastic screen protector vs tempered glass. Tempered glass protectors usually run around the price you see on amazon ( i have yet to find a reliable tempered glass protector for under $10 not talking about chinese knock-offs).
The one you posted from amazon is .4mm which is significantly thick and you will feel that you are touching an extra piece of glass. There are better ones out for a lower price (.15mm is the thinnest glass protector i know of from Spigen).
Click to expand...
Click to collapse
No confusion, I'm finding a lot of sub $10 Tempered glass screen protectors on ebay, there is even a thread dedicated to them from another website
I know certain cases like Lifeproof and Otterbox have pack in protectors that are cut specifically for the screen so the cases don't mess them up, and I'm looking for something like that that is sold by itself. I have a dbrand skin, and they don't have any from what I can tell, which is lame.
I did a lot of searching and couldn't find one when I got my S6. I ended up going with this case:
http://www.amazon.com/gp/product/B00QU4PRP8?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
It's not exactly what I wanted, but it offers good protection on all sides and works with skins without any problem.
Illrigger said:
I did a lot of searching and couldn't find one when I got my S6. I ended up going with this case:
http://www.amazon.com/gp/product/B00QU4PRP8?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
It's not exactly what I wanted, but it offers good protection on all sides and works with skins without any problem.
Click to expand...
Click to collapse
i like more fabolous..
http://www.amazon.com/Caseology®-Pr...50474152&sr=1-3&keywords=caseology+samsung+s6
I bought a chinese glass tempered glass screen protector that does just that. However i can't imagine how you can find the same one, just try Chinese stuff shops.
I use Nilkin cp+ and it is the best thing I have used next to naked screen.
Try Buff screen Protectors, they do what you want, from edge to edge, and it is not glass, it is thicker than normal screen protector
Are there any curved/wet install screen protectors that will fit round the curved edges of the S6 or is a glass one the way forward?
I am clumsy and outdoors lots so would want some proection and it seems a lot of the plastic protectors only just about cover the screen.
I was very satisfied with the Spigen non-glass screen protector. It covered almost all of the screen, which surprised me. I only took it off because I prefer glass protectors.
Spigen screen protectors leave gaps around the border. Not as much as glass sp. This is to accommodate "case friendly" design.
HKSpeed said:
I was very satisfied with the Spigen non-glass screen protector. It covered almost all of the screen, which surprised me. I only took it off because I prefer glass protectors.
Click to expand...
Click to collapse
Interesting! I thought I read it only just covered the screen? Does it overlap slightly? Maybe it was earlier version!
JayX2A said:
Interesting! I thought I read it only just covered the screen? Does it overlap slightly? Maybe it was earlier version!
Click to expand...
Click to collapse
No screen protector I know of covers more than the screen. Are you using a case? If yes, which one?
HKSpeed said:
No screen protector I know of covers more than the screen. Are you using a case? If yes, which one?
Click to expand...
Click to collapse
Not got the phone yet - was pre ordering bits! I don't mean the whole front of the phone. On the spigen website it shows the protector being slightly wider than the display, but review I read elsewhere seem to have it cut quite narrow and it barely covers the active part of the screen.
This is the Spigen plastic screen protector I ordered below. I always use a case and it covers most of the screen. There's a tiny gap, but I wasn't bothered by it.
http://www.amazon.com/gp/product/B00QU4N0EI
A case option is the Spigen Ultra Hybrid FX case. Its the $17.99 option in the link below. It covers the entire phone (front, back, edges). Then you don't need a screen protector.
http://www.amazon.com/gp/product/B00QU4PN84
Reviews and photos of it: http://www.amazon.com/gp/customer-reviews/RT1Z3ENHAIQ8Z and http://www.amazon.com/gp/review/RDXA8F1JMNCI4
Below is a review of the case for an iPhone 6. It's in Japanese, but you get the idea. There's no S6 video review available.
Despite my comments in this thread, I'm not a Spigen fanboy LOL. I no longer use the Spigen screen protector (I have a no-name glass now) and I'm swapping my Spigen case for a Ringke Fusion.
HKSpeed said:
This is the Spigen plastic screen protector I ordered below. I always use a case and it covers most of the screen. There's a tiny gap, but I wasn't bothered by it.
http://www.amazon.com/gp/product/B00QU4N0EI
A case option is the Spigen Ultra Hybrid FX case. Its the $17.99 option in the link below. It covers the entire phone (front, back, edges). Then you don't need a screen protector.
http://www.amazon.com/gp/product/B00QU4PN84
Reviews and photos of it: http://www.amazon.com/gp/customer-reviews/RT1Z3ENHAIQ8Z and http://www.amazon.com/gp/review/RDXA8F1JMNCI4
Below is a review of the case for an iPhone 6. It's in Japanese, but you get the idea. There's no S6 video review available.
Despite my comments in this thread, I'm not a Spigen fanboy LOL. I no longer use the Spigen screen protector (I have a no-name glass now) and I'm swapping my Spigen case for a Ringke Fusion.
Click to expand...
Click to collapse
Have the Fusion on my Nexus - pretty good but teh back is coming away from the sides now. Like the look of the Rinke slim though.
Got some Spigen ones, they are pretty close to the size of the screen. Have to be so careful to line it up properly! Shame they didnt make it that fraction bigger, but I guess that was not possible due to the screen curve.
Ordered spiegen ones too, from amazon, 2 protectors wtih shipping costed 16.70€ but i have always dreamed of getting rid of that thick and heavy tempered protector.... they really do add weight and thickness to phone, especially if you decide to put front and back tempered protectors
Duzzy5 said:
Ordered spiegen ones too, from amazon, 2 protectors wtih shipping costed 16.70€ but i have always dreamed of getting rid of that thick and heavy tempered protector.... they really do add weight and thickness to phone, especially if you decide to put front and back tempered protectors
Click to expand...
Click to collapse
I was tryiing to find a 0.2mm glass one as the thread on here has that as the best one - but they donn't ship to UK
They're hard to find, I've seen a few on ebay.com but there are some glass protectors that will cover almost all of the phone. They're the ones that go over the buttons with a pass-through for the fingerprint sensor/home button. They have an entirely identical full front look. Like this one, but not edge of course, they make them for flat S6s too but the flat ones being the ones that are hard to find: http://www.ebay.com/itm/Samsung-Gal...hash=item4d3e1f582c:m:mF-rpmie8VK2iab6MR9K5EQ
benjmiester said:
They're hard to find, I've seen a few on ebay.com but there are some glass protectors that will cover almost all of the phone. They're the ones that go over the buttons with a pass-through for the fingerprint sensor/home button. They have an entirely identical full front look. Like this one, but not edge of course, they make them for flat S6s too but the flat ones being the ones that are hard to find: http://www.ebay.com/itm/Samsung-Gal...hash=item4d3e1f582c:m:mF-rpmie8VK2iab6MR9K5EQ
Click to expand...
Click to collapse
Ordered a couple of super cheap 0.26mm ones that I found online.
https://www.replacebase.co.uk/samsu...or-0-2mm-ultra-clear-with-oleophobic-coating/
Arrived yesterday and look ok - will see how they go on and if there are any halo issues.
JayX2A said:
I was tryiing to find a 0.2mm glass one as the thread on here has that as the best one - but they donn't ship to UK
Click to expand...
Click to collapse
I have a SUPER thin tempered glass screen protector for the front and back of my s6. On the back it is quite large so it has the halo but on the front it is cut so it just about covers the actual display bit, so there is no halo on the front. It covers the samsung logo at the top and the capacitive buttons at the bottom like any other screen protector. Both costs me £2.49 on eBay UK. After using a much thicker tempered glass screen protector on my s3 I would say that the thicker ones feel as if they would offer better drop protection.