[Q] My memory card damage coz of making partitions!! - General Questions and Answers

I decide to install one of android builds from this section on my X1,It's CWM needed,so I have make 4 partition on my card[ 1Fat 32 & 3 EX2]using MiniTool Partition Wizard Home Edition 5.2 and then apply.....My device doesn't detect the card anymore,just asking for formatting and I hit yes,and It appears again and again,trying to format the card using MiniTool Partition Wizard again to NTFS,Fat 32 and FAT again,no results,Unformat mark appears on the partition on this app.
I also tried HP format tool,but it doesn't help too....
PS:maybe it's better to ask it in X1 section,But I prefer to ask it here Bcoz of visiting by more peoples,sry....

Related

[Q] need help, with app2sd and or partitioning etc

hi Hopefully i am in Right section - not sure what is meant by Not posting a Rom ??
I have a Garmin Nuviphone a50 with android 2.1 , have successfully rooted phone with z4root, I am pretty sure I have partitioned my SD card tried on a mac with EXT-fuse and tried on a windows using mini-partition (as instructions on this site about Partitioning) both ways seem to work -
However here's my problem when i start up Link2SD application it always says :-second Partition not found - /dev/block/mmcblk0p2: - make sure you have 2 partitions both primary .
I partitioned with Fat32 and Ext2 (also tried with Ext3, Ext4 and few others) but always says same with link2sd.
Does anyone know how I can get my apps to SD card or what my problem is or have any suggestions . As i get that message space full so need to move some to SD card (phone supposed to come with 4gb internal memory, i have 16gb SD card also) why is it still full
Need help with Link2sd/app2sd and or partitioning
hi Hopefully i am in Right section - not sure what is meant by Not posting a Rom ??
I have a Garmin Nuviphone a50 with android 2.1 , have successfully rooted phone with z4root, I am pretty sure I have partitioned my SD card tried on a mac with EXT-fuse and tried on a windows using mini-partition (as instructions on this site about Partitioning) both ways seem to work -
However here's my problem when i start up Link2SD application it always says :-second Partition not found - /dev/block/mmcblk0p2: - make sure you have 2 partitions both primary .
I partitioned with Fat32 and Ext2 (also tried with Ext3, Ext4 and few others) but always says same with link2sd.
Does anyone know how I can get my apps to SD card or what my problem is or have any suggestions . As i get that message space full so need to move some to SD card (phone supposed to come with 4gb internal memory, i have 16gb SD card also) why is it still full

minitool> format>corrupt memory card>fix help please!!

i was using mintool to partition my 32gb microsd for use with link2sd on xperia mini pro
it formated cleaning sectors
but now its not picking up on phone or pc
can adb via android fix it
tried to format on other android and old windows 6.5 phone but no success:crying:
any ideas to fix greatly appreciated
It is not clear question. Although it is quite long time ago, but i know minitool can partition sd card perfectly. i dont know why you format it, if you want to convert files system, you can use minitool partition wizard to convert files system directly and without data losing.

[Q] SD Card Windows 7 Partition Problem

Hi All,
I have a problem with partitioning my SD card under windows 7,
I updated it with cwm image which creates 4 partitions
boot, data, and two more
From here http://forum.xda-developers.com/showthread.php?t=2032364&page=1
Windows 7 is only able to see the first one.
How do I change that or at least make it see the larger partition and not boot, which is only 120 Mb?
minitool
I used minitool to correct that, but it looks like it is not possible to change without breaking boot partition

[Completed] Help!!!!!!! My 8 gb sd card became unusable!!!!!!!!!

Ok..heres what happened, i tried to create partitions on my sd card using minitool partition wizard, first i created a ext 4 with 3 gb then i forgot to use the other 5 (remained unallocated) then i apply all the changes. Now my sd card can't be detected by the pc, phone or even the tool.
Please help, realy need it
XDA Visitor said:
Ok..heres what happened, i tried to create partitions on my sd card using minitool partition wizard, first i created a ext 4 with 3 gb then i forgot to use the other 5 (remained unallocated) then i apply all the changes. Now my sd card can't be detected by the pc, phone or even the tool.
Please help, realy need it
Click to expand...
Click to collapse
Take a look at HP USB Disk Storage Format Tool.
It is an app for windows.
You might look up on Google for its download link.
Cheers.

Can't crate more than one partition in SD

Hello guys. I've been struggling with this for 3 days now.
The thing is that I need to have an SD with 2 partitions for internal storage on android. The wierd thing is, no matter what procedure I take, the second partition cannot be formated. I can create the partition, but I when I format it it ends up with the file system "Other".
I've tried with A LOT of procedures, a lot of programs, I read a lot of guides, and nothing works.
This is all the info I can provide:
First partition works well in every case, I can read and write in it.
If second partition is Primary, file system is ALWAYS "Other" and NO free space left (all space marked as used), but if partition is logical, it does not even create it (updates as unallocated after commitment, as if nothing ever happened).
That "Other" partition is not recognized by nothing, and there is no way I can explore it.
I've tried in Windows 7 64 bits, Linux GParted Environment, Android 6.0 Marshmallow and Android 4.4 Kitkat.
I've tried in 3 devices: A PC, a Notebook and Moto E android with stock rom and CM 13.
I have 2 MicroSD, Kingston 16 GB Class 4 and Kingston 16 GB Class 10. All the procedures where repeated in both SD cards, so I discard the SD being broken.
I've used MiniTool Partition Wizzard, Acronis Disk Director Suite, EaseUS Partition Master and Paragon Hard Disk Manager on windows and AParted, Apps2SD: All in one tool and Parted4Android in Android (As well as GParted).
Tried both MBR and GTP. Same issue.
Tried FAT16, FAT32, NTFS, ext2, ext3 and ext4 in both first and second partition in MBR and GTP, primary and logical (ALL combinations, yes, a LOOOOT of formatting :3)
If third, fourth (and so on) partitions are created, the same as second partition happens.
I can succesfully create a second partition in a USB PenDrive.
Tried for example this: Created 2 partitions as FAT32, as always second partition marked as "Other", entered the first partition from windows, created a file. After that I switched the partitions with wasp. Once the other partition was active, when I tried to enter windows said "Drive X has no format, want to format?" Yes "Could not format X".
So, WHAT in the world am I supposed to do? D:
Thanks in advance guys :3 And sorry for my bad english.
UNATCOPres said:
Hello guys. I've been struggling with this for 3 days now.
The thing is that I need to have an SD with 2 partitions for internal storage on android. The wierd thing is, no matter what procedure I take, the second partition cannot be formated. I can create the partition, but I when I format it it ends up with the file system "Other".
I've tried with A LOT of procedures, a lot of programs, I read a lot of guides, and nothing works.
This is all the info I can provide:
First partition works well in every case, I can read and write in it.
If second partition is Primary, file system is ALWAYS "Other" and NO free space left (all space marked as used), but if partition is logical, it does not even create it (updates as unallocated after commitment, as if nothing ever happened).
That "Other" partition is not recognized by nothing, and there is no way I can explore it.
I've tried in Windows 7 64 bits, Linux GParted Environment, Android 6.0 Marshmallow and Android 4.4 Kitkat.
I've tried in 3 devices: A PC, a Notebook and Moto E android with stock rom and CM 13.
I have 2 MicroSD, Kingston 16 GB Class 4 and Kingston 16 GB Class 10. All the procedures where repeated in both SD cards, so I discard the SD being broken.
I've used MiniTool Partition Wizzard, Acronis Disk Director Suite, EaseUS Partition Master and Paragon Hard Disk Manager on windows and AParted, Apps2SD: All in one tool and Parted4Android in Android (As well as GParted).
Tried both MBR and GTP. Same issue.
Tried FAT16, FAT32, NTFS, ext2, ext3 and ext4 in both first and second partition in MBR and GTP, primary and logical (ALL combinations, yes, a LOOOOT of formatting :3)
If third, fourth (and so on) partitions are created, the same as second partition happens.
I can succesfully create a second partition in a USB PenDrive.
Tried for example this: Created 2 partitions as FAT32, as always second partition marked as "Other", entered the first partition from windows, created a file. After that I switched the partitions with wasp. Once the other partition was active, when I tried to enter windows said "Drive X has no format, want to format?" Yes "Could not format X".
So, WHAT in the world am I supposed to do? D:
Thanks in advance guys :3 And sorry for my bad english.
Click to expand...
Click to collapse
HI.BRO
GO.TO. CM13 THEN Reboot TO ClockworkMOD Recovery THEN CHOOSE Advanced THEN.Choose PARTITION SD CARD
Choose Partition SIZE
THEN Choose SWAP SIZE(SELECT 0 IF.U WANT TO.LEAVE SWAP)
GIVE A THANKS.IF I.HELPED U

Categories

Resources