Database Info

I bricked my phone!!!!!!

HELP! I was trying to frehsly install a rom..
so i used odin to "master clear" everything
it deleted everything!
hoping that in recovery mode, it'll let me "mount storage" so i can transfer my new rom into the phone, that didnt happen!!!
so, then i tried to go with odin 1 click to install i896 stock...
and it doesnt work , so i unplugged phone, and now i get that mobile phone error..
please help, the only thing i can do successfully do is put my phone in download mode! D:
PLEASE! PLEASE!
THANK YOU!

Open Odin, turn off your phone, hold the volume buttons, and plug it in to get it in download mode. Then use Odin to get stock rom on, then go from there.
Sent from my SAMSUNG-SGH-I897 using XDA App

Read carefully.....
ags on board said:
Open Odin, turn off your phone, hold the volume buttons, and plug it in to get it in download mode. Then use Odin to get stock rom on, then go from there.
Click to expand...
Click to collapse
+1
Go into the ODIN thread and read extensively. Since you can get into download mode, make sure that once you connect your phone you get the COM notification in ODIN. Mine always appears in the small box in the upper left portion of ODIN one-click (if you don't get this, reinstall the samsung drivers found in the ODIN thread and reboot. If you're running Win7, make sure you run ODIN as admin).
Master Clear does exactly what it says...it wipes all of your data. MC is only supposed to be used when your phone is on and fully booted up with USB debugging on.
Flashing back to stock should only take ~5 minutes max - if it halts unplug, pull your battery, wait a few seconds, and restart. If it continues to fail, try a different USB port. If using a PC, use the back USB ports. If it still fails, try a different system. (I had this issue this weekend and finally got it on the first run on my friend's laptop - not sure what happened, had flashed 5-6 times on mine previously).
Hope this helps. Once you're back to stock, be sure to thank designgears for his killer dev work!
EDIT:
PS It's pretty tough to brick a cappy - read extensively in the ODIN thread and you'll see what I mean.

Its always good practice to back everything up and know the step by step procedures before you ever do anything. Good luck!

Connexxions "how to" videos are VERY detailed and shows you step by step how to do just about everything on this phone. I highly recommend them.

don't panic, ur lucky that u can still get into download mode. that is just soft brick I think..
Sent from my SAMSUNG-SGH-I897 using XDA App

Bricked, need help.

So, I bricked my Infuse last night at work when I tried installing MIUI from ROM Manager. I've been trying to unbrick using gtg's Ultimate Unbrick method, but no luck. I believe it's something to do with the Samsung Drivers since my phone is not recognized in Odin. Tried to redownload the Drivers from Samsung's website, but still doesn't work.
Any ideas?
BTW, running Windows 7 32bit

why would you install a rom that's for a different phone?
can you boot into recovery mode? did you try the "jig"?

Didn't think there would be a listed ROM in the manager if it wasn't for the phone...
Won't boot into recovery at all, Samsung pops up, then it goes blank, and Samsung pops up again. It loops like that until I pull the battery.
Was hoping to avoid having to buy something then waiting for it to arrive, as I need the phone working asap.

the reason other roms pop up in rom manager is because you are using the galaxy recovery. unless it says "for infuse" (there is only one, gtg's rom) it wont work. bummer dude. im all out of ideas, never had this happen. hopefully someone who's been through this can chime in and provide some info that will help you.
on a side note, why cant you take it to an att branch and have them exchange it for you?

Pat713 said:
Didn't think there would be a listed ROM in the manager if it wasn't for the phone...
Won't boot into recovery at all, Samsung pops up, then it goes blank, and Samsung pops up again. It loops like that until I pull the battery.
Was hoping to avoid having to buy something then waiting for it to arrive, as I need the phone working asap.
Click to expand...
Click to collapse
I hope u have USB debugging turned on. If yes, u cud try this:
1. Download and install android SDK (search google for this if don't know how to).
2. Open a command prompt
3. Type in "adb reboot recovery" without quotes, and don't hit enter
4. Connect phone to PC
5. Turn the phone on
6. Wait for "samsung" to appear, and hit enter in command prompt
7. If it says "device not found", use the up arrow to get the command from history, and hit enter again. At some point, it should issue the command to the device.
8. If u can get to recovery, well, u have a way to now try to flash any other ROM.
Don't give up. Samsung has strong phones that could be got out of soft bricks most of the time.

Delete/reinstall the drivers.
Infuse 4G

Just tried Diablo's method, and it tells me command not recognized...

Download Kies on your pc to have it recognize ur phone. Run odin. Put ur phone in download mode (pull out battery, put it back in, hold both volume buttons down, plug in ur usb) and use gtg's unbrick.
Sent from my SAMSUNG-SGH-I997 using XDA App

Tried Kies before and it would never recognize the Infuse. Should I pick Galaxy?

UPDATE!!
Redownloaded Kies and installed the drivers (for the 500th or so time) and now Odin is recognizing a device. It's showing [COM3] instead of COM## but I'm letting Odin do its thing. Seems to be working... Crossing my fingers!
EDIT::
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
****in A! Thanks for the help guys!

Pat713 said:
Didn't think there would be a listed ROM in the manager if it wasn't for the phone...
Won't boot into recovery at all, Samsung pops up, then it goes blank, and Samsung pops up again. It loops like that until I pull the battery.
Was hoping to avoid having to buy something then waiting for it to arrive, as I need the phone working asap.
Click to expand...
Click to collapse
You need to buy a jig, that will solve the problem.
The jig is less than $10 bucks shipped if you buy it on ebay.
Here is the link:
http://cgi.ebay.com/Samsung-Galaxy-...0563626533?pt=Cell_Phones&hash=item20ba3eba25
Easy to use.. all U do is pull the battery, plug the jig into usb port on the fone replace battery and you will see the big triangle saying "Download" then unplug the jig and load odin.
Setup the pda/phone/pit/csc files in odin3. Then plug in the usb cable from computer to the phone making sure that where odin says "com" that it is highlighted yellow. Then click start in Odin and wait til it says "reboot" after that you will have a working phone with stock froyo 2.2 . Don't change any default setting in odin.
Use the "Ultimate Unbrick" rom - Here is the link:
http://forum.xda-developers.com/showthread.php?t=1116251

Misterjunky said:
You need to buy a jig, that will solve the problem.
The jig is less than $10 bucks shipped if you buy it on ebay.
Here is the link:
http://cgi.ebay.com/Samsung-Galaxy-...0563626533?pt=Cell_Phones&hash=item20ba3eba25
Easy to use.. all U do is pull the battery, plug the jig into usb port on the fone replace battery and you will see the big triangle saying "Download" then unplug the jig and load odin.
Setup the pda/phone/pit/csc files in odin3. Then plug in the usb cable from computer to the phone making sure that where odin says "com" that it is highlighted yellow. Then click start in Odin and wait til it says "reboot" after that you will have a working phone with stock froyo 2.2 . Don't change any default setting in odin.
Use the "Ultimate Unbrick" rom - Here is the link:
http://forum.xda-developers.com/showthread.php?t=1116251
Click to expand...
Click to collapse
I got it unbricked now, problem was the drivers wouldn't correctly install on Win7.
But, now I have a new problem. Just put 3e recovery on and flashed CWM, only to get bricked again (no problems unbricking this time, taking longer to type this than it took to unbrick...). Also, sometimes apps refuse to download from the Market. I tap "INSTALL" and the notification pops up saying downloading, but then it disappears and nothing happens, its like I hit cancel. I'm going to call it for today and get some sleep. At least the phone is usable now! :-D

Pat713 said:
Just tried Diablo's method, and it tells me command not recognized...
Click to expand...
Click to collapse
That means u do not have android toolkit installed on ur system. You should install it first for the adb commands to work.
I would recommend downloading and learning the basics of adb. This could be a life saver in many no-so-happy situations.

Pat713 said:
I got it unbricked now, problem was the drivers wouldn't correctly install on Win7.
But, now I have a new problem. Just put 3e recovery on and flashed CWM, only to get bricked again (no problems unbricking this time, taking longer to type this than it took to unbrick...). Also, sometimes apps refuse to download from the Market. I tap "INSTALL" and the notification pops up saying downloading, but then it disappears and nothing happens, its like I hit cancel. I'm going to call it for today and get some sleep. At least the phone is usable now! :-D
Click to expand...
Click to collapse
Had this same problem and it turned out to be a hardware problem. There was no gix for it. Also youll notice that gtgs recovery includes a preroot. If you need to send your phonr back like i did youll need to get that off. It was tricky for me because the hardware was so screwey. I got it off after a few reboots of the phone and a couple of trys with superoneclick.
Sent from my SAMSUNG-SGH-I997 using XDA App

Did I completely mess up my Captivate?

So I been trying to fix my friends Captivate for a few days now.
I posted a video a few days ago. I did get it into download mode with my jig. However everything froze while I used the 1 click captivate heimdall to flash my phone. (It did flash but some things did not work)
Anyhow now My phone has "Phone - ! - PC"
No download mode, the jig sends it back to this screen too. I tried so many button combinations. I really don't want to send my phone in to some website. I was so freakin close...
Please help
My Evo 3D is laughing at me and the captivate.

I pull out my battery and let it discharge for about 15 secs and hold volume buttons then connect USB cable and finally insert battery while still holding volume buttons of course, it'll get you into download mode. Never failed me. I've had my phone not even turn on the screen, it stays dark during a screwed up flash with odin. I then flash UCKI2 with bootloaders and then flash to gingerbread ROM I like. If you plan on installing custom ROMs your phone will semi-brick numerous times. If its showing a phone, exclamation mark and computer with a message saying firmware flashing failed. That is perfect! Just make sure you have Samsung USB drivers and simply flash using odin, it'll show COM and a number like 5 (COM5) then just flash. I'd advise you to remove any external SD card and restart before using odin it acts up. Hope this helps

hupo224 said:
So I been trying to fix my friends Captivate for a few days now.
I posted a video a few days ago. I did get it into download mode with my jig. However everything froze while I used the 1 click captivate heimdall to flash my phone. (It did flash but some things did not work)
Anyhow now My phone has "Phone - ! - PC"
No download mode, the jig sends it back to this screen too. I tried so many button combinations. I really don't want to send my phone in to some website. I was so freakin close...
Please help
My Evo 3D is laughing at me and the captivate.
Click to expand...
Click to collapse
The "Phone - ! - PC" will be your download mode screen. Just download from there.

However, if a flash goes foul somehow, you may be left with the infamous "phone--/!\--PC" screen.
If you see this, don't panic. Although it's not technically the download mode screen, many users (including myself) have been able to successfully flash from that screen. Give it a try.
Click to expand...
Click to collapse
Comes from this thread:
http://forum.xda-developers.com/showthread.php?t=1351224
Let me reiterate cause it will save you the same thing happening, reboot your computer, be connected to internet, remove SD card and then open odin and then connect your phone and flash otherwise high likelihood of something going wrong again. I'm used to it but its frustrating the first couple times.

asasione said:
Comes from this thread:
http://forum.xda-developers.com/showthread.php?t=1351224
Let me reiterate cause it will save you the same thing happening, reboot your computer, be connected to internet, remove SD card and then open odin and then connect your phone and flash otherwise high likelihood of something going wrong again. I'm used to it but its frustrating the first couple times.
Click to expand...
Click to collapse
100% - I had similar experience with my first flash but after a few goes at it and 3 or 4 "soft-bricks" all has been great!

Well when I plug it in Windows 7 doesn't even detect it anymore. But the phone will go back to that screen when the USB is connected.
Nothing in ODIN/Heimdall pops up...
Please help..

It seems I got it in download mode this morning with the jig. Just trying to get my damn pc to read it. Sometimes the right drivers work sometimes they don't. ugh

Connection issue in my sig

Any chance you have another pc to try it with? Or possibly another cable?

Going to try one click on ubuntu...

Ive had issues in the past before with certain USB ports on my PC not reading the phone.
Try plunging in your phone to a different USB port and it can make a world of difference with the driver issue (even if you have to plug it in the back of your PC).

try one click unbrick in the android development page

hupo224 said:
Well when I plug it in Windows 7 doesn't even detect it anymore. But the phone will go back to that screen when the USB is connected.
Nothing in ODIN/Heimdall pops up...
Please help..
Click to expand...
Click to collapse
Are you running x64? If so are you running the 64 bit drivers?

I also had the same issue a couple of times, which is technically called a "soft brick" . You could resolve this issue using ODIN flasher and reverting back to stock. Now coming to USB problem in windows, this is a known issue with windows (especially Vista and Win7) and samsung!! The remedy which I found is as follows :-
1.Disconnect the phone from USB
2.Remove samsung USB driver software from your windows PC.
3.Reboot and then navigate to C:\Program Files\ (assuming that C:\ is your windows OS partition)
Delete "samsung" folder.
4.Download latest samsung USB Drivers for captivate and install.
5.Reboot the phone.
6.Open ODIN and connect your Phone to PC.
It should detect the COM Port by now. Try this and get back
"Thanks" , If I helped U

[Q] Root frozen and can't get into download mode

I went to flash my sgs2s and it successfully went into download mode. I started Odin and it froze on xxxxx.img. After waiting about 30 minutes, I shut off the phone and tried to go back to my download mode, only to find that it goes to "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again." I have tried so many different ways to get it back into download mode and nothing seems to work. I can get to the screen to push the vol+ to get to download mode and it goes back to the error screen.
I have tried to use Kies to restore my device to no avail. I have scoured the web for any information, also to no avail. I have tried a couple of ROMs, one which was a stock ROM, no difference. I cannot boot my phone and am in need of my phone. Thank you for any help you might be able to offer.

Gsii or gsii skyrocket?
Sent from my Liberty using XDA

Samsung Galaxy S2 Skyrocket. Sorry about that.

phantomofdaATL said:
Samsung Galaxy S2 Skyrocket. Sorry about that.
Click to expand...
Click to collapse
Its fine, its still in dl mode. Run it again
if it doesnt work after a few tries, reboot pc, right click and run odin as admin, try a different usb port or cable

phantomofdaATL said:
I went to flash my sgs2s and it successfully went into download mode. I started Odin and it froze on xxxxx.img. After waiting about 30 minutes, I shut off the phone and tried to go back to my download mode, only to find that it goes to "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again." I have tried so many different ways to get it back into download mode and nothing seems to work. I can get to the screen to push the vol+ to get to download mode and it goes back to the error screen.
I have tried to use Kies to restore my device to no avail. I have scoured the web for any information, also to no avail. I have tried a couple of ROMs, one which was a stock ROM, no difference. I cannot boot my phone and am in need of my phone. Thank you for any help you might be able to offer.
Click to expand...
Click to collapse
What were you flashing? Seems like a bad download. Happened to me once. The error screen is download mode. If you try and connect the phone to a computer I am sure ODIN will be able to se it. Redownload whatever you were flashing and try to flash it again using ODIN.
As a usual warning, do NOT check repartition in ODIN.
As a usual tip, use the USb port that's directly on the motherboard of your PC, and not the one on the front.
Also, run ODIN as administrator.
Sent from my SAMSUNG-SGH-I727 using XDA

Changed the usb port and it WORKED! Thanks everyone!

Good to hear.
I had to ask because a lot of... less-than-intelligent... people tend to flash skyrocket roms on gsii phones or vice versa, thus bricking their devices...

Samsung Infuse Soft Brick and Distorted Clockwork Mod Recovery

I am in desperate need of help .. I am not a noob to flashing roms and rooting, however I have a one-off situation w/ no precedents to my knowledge. I have read these and other forums for days to no avail.
I was flashing Infintium Rom 4.0.4 from MIUI 2.3.6. I followed the steps listed in the post (http://forum.xda-developers.com/showthread.php?t=1661690). After flashing I rebooted and waited however the phone was/is stuck on the Samsung logo and never progressed. I then pulled the battery and attempted to go back to recovery mode to reflash make sure I did flashed correctly. However, upon going back into recovery I was greeted by the below image.
Clockwork Mod is extremely distorted and flat out unusable !! As I read further down it advised to use Heimdall (http://forum.xda-developers.com/showthread.php?t=1331381). I downloaded and attempted to use, however my PC (Which by the way is Windows 7 64-Bit) recognized the phone but the Heimdall software did not. I already had the right drivers for the PC and phone. After a few tries I deleted the files and reapplied them. On the 2nd menu after selecting list devices, on the drop down the option for Samsung USB Composite Device neeever ever appears. I also tried on a different PC that ddnt have the drivers and started brand new. Still, Heimdall ddnt recognize.
I also tried to flash numerous files including but not limited to GTG Ultimate Unbrick via Odin. Again, PC recognized USB connection however program ddnt. At this point, I do not know if it is because the status of Clockwork Mod on my phone, but I know it is not because of the drivers or the USB ports on my PC.
In addition to that, I have just scrapped the idea of flashing or getting in CWM and just wanted to do a hard reset (While phone is off held Vol down and Power, once started released power and contimued to hold Vol down. This should take the phone from the Samsung logo to an alt menu that will give the option to do a factory reset. But again w/ my luck .. that screen neeever appears.
In short I have tried at least 3 different ways and many maaany variations to get the phone back into recovery or into a full boot and had NO success.. Please help and ask as many questions as needed to diagnose and resolve this issue .. Thanx in advance and apologize in advance if posted in the wrong thread.

Are you placing your phone in download mode?
Remove battery and place it back.
Hold vol+ & vol- , and plug in the usb to your phone with the other end already connected to the PC.
Now see if Odin or heimdall recognize your device.
Sent from my sweet & buttery Infuse

andros11 said:
Are you placing your phone in download mode?
Remove battery and place it back.
Hold vol+ & vol- , and plug in the usb to your phone with the other end already connected to the PC.
Now see if Odin or heimdall recognize your device.
Sent from my sweet & buttery Infuse
Click to expand...
Click to collapse
I have done so neither Odin or Heimdall are recognizing it or showing the phone is connected.

ohsirus said:
I have done so neither Odin or Heimdall are recognizing it or showing the phone is connected.
Click to expand...
Click to collapse
If neither Odin or Hemdall can 'see' the phone, then possibly you don't have the correct drivers installed...
Try downloading and installing these:
http://d-h.st/sKF
Then open Odin/Hemdall and plug your phone in again while in Download Mode.

Ryo Misaki said:
If neither Odin or Hemdall can 'see' the phone, then possibly you don't have the correct drivers installed...
Try downloading and installing these:
Then open Odin/Hemdall and plug your phone in again while in Download Mode.
Click to expand...
Click to collapse
I will try again .. Downloaded, rebooting then will go thru the process again .. standby

Ryo Misaki said:
If neither Odin or Hemdall can 'see' the phone, then possibly you don't have the correct drivers installed...
Try downloading and installing these:
Then open Odin/Hemdall and plug your phone in again while in Download Mode.
Click to expand...
Click to collapse
no change .. still shows disconnected

The pic u have posted it shows u need to press the up button to get the download mode (continue)
Sent from my Galaxy Nexus using Tapatalk 2

rkkaranrk said:
The pic u have posted it shows u need to press the up button to get the download mode (continue)
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
I just did that to post a pic as an example .. I did go to download mode and not recognizing it

The CWM screen is shot because you don't have gingerbread bootloaders, it will always look like that until to can flash the right ones..
Have you tried different cables, different ports, etc?
Sometimes mine would recognize.. sometimes being plugged in first then running Odin works, sometimes I would have to run Odin and then plug in the phone.. kinda a crapshoot...
Its powered by Jellybeaned AOKP!

drnecropolis said:
The CWM screen is shot because you don't have gingerbread bootloaders, it will always look like that until to can flash the right ones..
Have you tried different cables, different ports, etc?
Sometimes mine would recognize.. sometimes being plugged in first then running Odin works, sometimes I would have to run Odin and then plug in the phone.. kinda a crapshoot...
Its powered by Jellybeaned AOKP!
Click to expand...
Click to collapse
I know I need to get the bootloader and a kernel on it however I cant = ( .. yet .. I have 4 different ports on my PC and have tried them all. i have tried phone on then run programs and programs on 1st then phone on and no new results.
I found this short video and it describes my exact situation .. please watch to futher understand http://www.youtube.com/watch?v=OHLUYckTlug

So u have odin and heimdal both on the same PC and drivers for them if yes then try this.
On the PC/Laptop uninstall all the drivers for samsung or any other phone and follow this.
Go to accessories> system tool> system restore and check the restore point where the drivers for heimdall were installed restore to a previous restore point after restore finishes install the drivers for Infuse and see now Odin recognizes ur phone, It should.

I had the same exact problem, do you have another phone on which you can install the same CWM recovery on? ...Because the clockwork mod recovery still works, it's just that you can't see it. So just flash a new ROM, by going back n forth between phones, clock how many clicks it takes to get to 'choose zip to install' then 'download' on the not messed up phone, then do the same on the screwy one, just keep doing that till u flash the new ROM.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app