Related
The last line of my /init.rc file:
Code:
# +++++++++++++++++++++++++++++++++++++++++++++
# NAGSM_ANDROID_FRWK_JUSTIN_20101013 TMO LogMeIn
service RescueStarter /system/bin/RescueStarter
user nobody
group input graphics
oneshot
I'm just wondering what's this doing here? I would think this is a T-Mobile service, based on the "TMO", but I cannot find anything about the RescueStarter service online. RescueStarter & RescueServer are in /system/bin/, and hex-dump seems to insinuate (although you can gather this just from the names of the files) it's a remote control that opens a port and listens for a request. I'm assuming that because the user is "nobody", that it cannot run... but not sure. Another assumption is that it provides graphics, like VNC, since it belongs to the groups "input" & "graphics". Again, just a guess. I normally work on Debian Linux systems, btw, not Android. Port scan shows nothing open (TCP 1-65535, and I didn't find anything with a non-conclusive UDP scan, either).
Maybe there's someone smart out there that can shed some light on this for me? Or maybe tell me the proper place to ask? Thanks!
Highlights
100% open source (GPLv2+)
No ads
One-click connection (batch mode)
Supports RSA SecurID and TOTP software tokens
Keepalive feature to prevent unnecessary disconnections
Compatible with ARMv7, x86, and MIPS devices
No root required
Based on the popular OpenConnect Linux package
Click to expand...
Click to collapse
Requirements
Android 4.0 (ICS) or higher (with working VpnService + tun infrastructure)
An account on a suitable VPN server
Click to expand...
Click to collapse
Downloads
Binaries are attached to this post under the downloads tab.
Google Play: https://play.google.com/store/apps/details?id=app.openconnect
Source code: https://github.com/cernekee/ics-openconnect
F-Droid: https://f-droid.org/repository/browse/?fdid=app.openconnect
Click to expand...
Click to collapse
(note that the F-Droid binaries are signed by a different key than the official releases)
Changelog
Code:
v1.11 - 2015/02/21
- Fix "Unknown compression type 0" errors when CSTP and DTLS use
different compression settings
Older changelogs:
Code:
v1.10 - 2015/02/08
- Fix CSD script problem on Lollipop (bug #1)
- Fix IPv6 address display on status window (bug #2)
- Enable LZ4 compression support
- Identify as a mobile client when Android or iOS is selected
- Update to OpenConnect v7.04+, GnuTLS 3.2.21
v1.02 - 2014/09/02
- Fix regression on certificate handling
v1.01 - 2014/08/29
- Add Spanish translations (thanks to teosoft)
- Fix regression on CSD scripts starting with "#!/bin/sh"
- Improve error messages on broken ROMs that throw exceptions when
starting a VpnService
- Fix intermittent fragment-related crashes on ICS
v1.00 - 2014/08/10
- Fix problems storing >8kB certificates on some ROMs
- Clean up seldom-used menu items and move some options into General Settings
or About
- Integrate Xposed module for bypassing the VPN confirmation dialog
- Switch to ACRA for problem reporting
v0.96 - 2014/07/06
- Force a minimum MTU of 1280 on KK due to bugs in 4.4.3 and 4.4.4 ROMs:
https://code.google.com/p/android/issues/detail?id=70916
- Fix navigation anomalies (weird Back button behavior) seen after
re-entering OpenConnect from one of the Notifications
v0.95 - 2014/06/14
- Show the auth dialog <message> text in case it contains useful information
- Add German translations (thanks to Ingo Zansinger <[email protected]>)
- Add Chinese translations
- Add Advanced options for changing Dead Peer Detection timeout and enabling Perfect Forward Secrecy
- Clean up a bunch of lint warnings and unused strings/files
- Try to generate a human-readable profile name when adding a new VPN
v0.91 - 2014/06/01
- Fix bugs involving saved authgroups
- Fix batch mode error handling
- Update to GnuTLS 3.2.15 to fix GNUTLS-SA-2014-3 / CVE-2014-3466
v0.9 - 2014/04/26
- Add new "Send feedback" screen
- Add new "SecurID info" screen for RSA soft token users
- Allow changing settings and using other menu options (about, SecurID,
send feedback, etc.) while connected
- Update FAQ and provide some links to relevant XDA posts
v0.81 - 2014/04/06
- Fix potential issue recognizing certificates stored in VPN profiles
created with <= v0.7
v0.8 - 2014/04/02
- Fix hangs after reconnect if DTLS is disabled
- Fix incorrect storage of PKCS#12 certificates
- Remove unnecessary passphrase prompts on unencrypted certificates
- Add a workaround for ASA certificate request quirks
- Fix FC when attempting to import an OpenVPN profile
v0.7 - 2014/03/08
- Update GnuTLS to address CVE-2014-0092
- Fix FC and other misbehavior on IPv6 connections
- Update to libopenconnect 5.99+
- Fix/delete several broken translations
- Minor improvements to the auth form UI
- Switch curl from OpenSSL to GnuTLS and remove advertising clauses
v0.6 - 2014/02/09
- First release in Google Play Store
- Change to new "big O" launcher icon
- Avoid displaying error alerts if the user terminated the connection
- Try to make the libopenconnect build process more robust, and strip *.so
files to conserve space
v0.5 - 2014/02/01
- Fix "living dead" connections (can't pass data after reconnection due to
DTLS parameter mismatches)
- Add FAQ tab in response to user feedback
- Move log window into a tab
- Reorganize action bar so that the most important items (Status/Log/FAQ)
are tabs, and less important items (Settings/About) are in the menu
- Fix KeepAlive socket errors on KitKat devices
- Other UI and documentation fixes
- Add split tunnel configuration options
- Improve icons
v0.2 - 2014/01/18
- Allow SecurID token import via URI or text file
- Newly reworked "status" tab with uptime, error alerts, IP addresses,
etc.
- Fix a couple of bugs involving screen rotation / activity redraw on
the log window
- Prompt for hostname instead of profile name when adding a new VPN, to
help avoid "empty hostname" mistakes
- Numerous other UI improvements and fixes
- Remove "reconnect on boot" until it works properly
- Try to accommodate Linux CSD wrapper scripts starting with "#!/bin/bash"
Click to expand...
Click to collapse
FAQ
Q: What is this app used for?
A: OpenConnect is used to access virtual private networks (VPNs) which utilize the Cisco AnyConnect SSL VPN protocol. A typical use case might involve logging into your workplace remotely to check email after hours.
If in doubt, check with your I.T. administrator to see if a suitable service is available.
Q: How do I get started?
A: In most cases, you'll just need to create a profile and enter the hostname of the VPN gateway. The other fields in the profile are all optional and should be left alone unless there is a specific need to change them.
Once you've set up the profile, select the VPN entry and OpenConnect will attempt to establish a new session. If this fails, the "Log" tab may provide helpful diagnostic information.
Q: How do I authenticate using an SSL client certificate?
A: Copy your certificate files to Android's external storage directory (nominally /sdcard or the Downloads folder), then edit the VPN profile and make the following changes:
P12 or PFX file: select "User certificate", pick the file from the list, then touch "select". Leave "Private key" blank.
Single PEM/CRT/CER file: same as above.
Separate PEM/CRT/CER and KEY files: populate "User certificate" with the certificate file, and "Private key" with the key file.
When finished, delete the certificate files from external storage so they cannot be stolen by other apps.
If you are generating your own keys (e.g. for use with your ocserv gateway), some basic CA setup instructions are posted here.
Q: Will OpenConnect work with non-AnyConnect VPNs?
A: Unfortunately the software design is tied very closely to the AnyConnect requirements and the libopenconnect interfaces. Therefore it only works with Cisco AnyConnect and ocserv gateways.
Q: Will OpenConnect work with Cisco IPsec VPNs running on an ASA?
A: OpenConnect supports SSL VPN (CSTP + DTLS) only.
Q: How do I import a SecurID software token?
A: If you have an URL that starts with "com.rsa.securid.iphone://" or "http://127.0.0.1/securid/" in your email, click on it and tell OpenConnect to add it to the desired VPN profile. If you just have a raw token string then write it to a text file, copy it under /sdcard, click "Token string" in the VPN profile editor, then select the filename.
If you have an "sdtid" XML file, copy it to /sdcard and then import it.
Q: Is it possible to skip all login prompts when connecting?
A: If you have saved your username, password, or other credentials, or if you are using SecurID or certificate authentication, you can try enabling "Batch Mode" in the VPN profile to skip the login dialogs. If you need to change your saved password later or have trouble connecting, just disable batch mode.
The VPN warning dialog is a security feature built into the Android OS. It cannot be bypassed by OpenConnect, but if your device is rooted, you can try installing the Xposed Framework and then activating the Auto VPN Dialog Confirm module. Some notes on this are posted here.
Due to the user interaction required by these dialogs, it is not always possible to reliably start up the VPN in the background. So a "start-on-boot" feature is not currently provided.
Q: How do I improve battery life while the VPN is up?
A: One option is to select "Pause when asleep" under Settings. The downside is that VPN access will be temporarily stopped when the screen is off. Also, ASA gateways sometimes get annoyed with constant reconnections and may prematurely terminate your session after a few days.
Another option is to contact your server administrator and request that they disable dead peer detection (DPD), increase the idle timeout to >1hr, and increase the keepalive interval to ~5min or so.
Q: How do I use OpenConnect with AFWall+?
A: There are a few caveats to keep in mind when using an Android firewall with VPN:
* If you run KitKat, use Android 4.4.2 or higher and AFWall 1.2.8 or higher. Android 4.4 and 4.4.1 have a serious TCP MSS bug which causes stalled connections and/or poor performance. AFWall <=1.2.7 does not have the extra logic needed to handle the routing changes in KitKat.
* Always allow traffic from the VPN app on all interfaces. In particular, you should whitelist VPN traffic from OpenConnect, as OpenConnect sends DNS requests over the VPN interface every few minutes to help keep the connection from timing out.
Q: Are any apps incompatible with VPN?
A: Apps which perform their own DNS resolution, such as Firefox, may have issues picking up the latest system DNS settings when connecting to the VPN. This can be a problem if your system DNS servers are not accessible over the VPN's routes, or if you are trying to look up hostnames that do not have public (internet) DNS entries.
Q: Under what circumstances will OpenConnect request root?
A: There are two root-only features shown under Settings; both are disabled by default. One setting works around a ROM bug in CM9 which sets incorrect permissions on /dev/tun, preventing VpnService from passing traffic to the tunnel interface; the other setting loads tun.ko on ROMs that neglect to load it by default.
Based on user feedback and testing, future releases may autodetect these conditions.
Q: How do I send a problem report?
A: Navigate to Log -> (menu) -> Send log file. Please be sure to furnish a complete, accurate description of the issue you are seeing, as the logs do not always show a smoking gun.
Click to expand...
Click to collapse
TODO
Translations - I will set up the necessary infrastructure if there are volunteers
Compatibility testing
Add x509 certificate parsing/validation in the profile editor
Enable Android keystore support
Proxy support
Split tunnel DNS?
Click to expand...
Click to collapse
MISC
Using OpenConnect + ocserv (on a VPS) to bypass China's Great Firewall (GFW): link
XDA:DevDB Information
OpenConnect, App for the Android General
Contributors
cernekee
Source Code: https://github.com/cernekee/ics-openconnect
Version Information
Status: Testing
Created 2014-01-18
Last Updated 2015-02-21
hello cernekee,
I was using smoothconnect on my note3 and It was working just fine, but now after I update my note3 to kitkat it surfs only couple of things like "play store", google search, and whatsup. but all other web sites and programs do not!!
now I tried out this program "open connect" with some hope but nope, I does the same thing. It only opens play store and google search but no other things.
I wonder what cause this problem, any suggestions please??
msm88now said:
hello cernekee,
I was using smoothconnect on my note3 and It was working just fine, but now after I update my note3 to kitkat it surfs only couple of things like "play store", google search, and whatsup. but all other web sites and programs do not!!
now I tried out this program "open connect" with some hope but nope, I does the same thing. It only opens play store and google search but no other things.
I wonder what cause this problem, any suggestions please??
Click to expand...
Click to collapse
Sometimes an MTU or TCP MSS problem could cause this symptom. What kind of gateway are you connecting to? Are you the admininstrator?
Older versions of KitKat did have an MSS problem; I think 4.4.1+ is OK: https://code.google.com/p/android/issues/detail?id=61948
There are a few other outstanding problems on <= 4.4.2: http://www.androidpolice.com/2014/0...n-routing-fixes-are-planned-for-some-of-them/
Do you see the same problem connecting from other systems, like a Windows PC, or even the Cisco AnyConnect Android app?
Hi cernekee,
I have an openSSL Cisco vpn connection provided by my university, I hooked it with D-615 Dlink router through DHCP.
Cisco AnyConnect for andriod does not work on our university network because it asks for a certificate which my uni does not provide. that's why I'm using smoothconnect.
anyways, right now I have a flawless connection on my all devices on my room's wireless like my both Win7 laptops and my galaxy S2 andriod 4.1.2.
all work except my note 3 after I updated it to (4.4.2). I don't know if it's a IPv6 or MTU problem,
I tried to decrease MTU value in smoothconnect but with no success. as Cisco stated in: AnyConnect Android 4.4 (KitKat) Compatibility Update (CSCul28340)
any suggestions please???
msm88now said:
Hi cernekee,
I have an openSSL Cisco vpn connection provided by my university, I hooked it with D-615 Dlink router through DHCP.
Cisco AnyConnect for andriod does not work on our university network because it asks for a certificate which my uni does not provide.
Click to expand...
Click to collapse
I don't see this university's VPN requesting a certificate (i.e. SSL client cert). It just asks for a group/username/password.
Are you getting an error that says that the gateway is not licensed for mobile, after you enter your password?
that's why I'm using smoothconnect.
anyways, right now I have a flawless connection on my all devices on my room's wireless like my both Win7 laptops and my galaxy S2 andriod 4.1.2.
all work except my note 3 after I updated it to (4.4.2). I don't know if it's a IPv6 or MTU problem,
I tried to decrease MTU value in smoothconnect but with no success. as Cisco stated in: AnyConnect Android 4.4 (KitKat) Compatibility Update (CSCul28340)
any suggestions please???
Click to expand...
Click to collapse
Can you grab a packet capture when you're seeing the connectivity failures, and email me the result? e.g.
Code:
adb push tcpdump /data/local/tmp
adb shell
cd /data/local/tmp
su
chmod 755 tcpdump
./tcpdump -n -i tun0 -w out.pcap
yes that's right, Cisco anyconnect asks only for username/ password but when I try to start a connection it ends up with no license error!
that's way I'm using smoothconnect and now openconnect on my both andriod phones.
now for my problem, I didn't get what do you mean by connectivity failure because I'm not getting any connectivity failure messages on my note3 after update to 4.4.2 neither on smoothconnect nor on openconnect. it connects as usual and I can see some traffic packets are being transfered but I can only surf google serch, youtube and some other stuff like play store and whatsup. whenever I try to surf any other website like for example bbc news the browser( chrome, opera, Dolfin..) just waits and then ends up with nothing like there is no internet connection!
did I explain my problem clearly? is it an Ipv6 problem? I'm really confused and frustrated
msm88now said:
yes that's right, Cisco anyconnect asks only for username/ password but when I try to start a connection it ends up with no license error!
Click to expand...
Click to collapse
OK. This is because the Cisco mobile clients look for an "X-CSTP-License: accept" header from the gateway after authenticating, to see if the operator has paid extra to support the Cisco mobile client. libopenconnect-based clients (including SmoothConnect) do not require this header.
now for my problem, I didn't get what do you mean by connectivity failure because I'm not getting any connectivity failure messages on my note3 after update to 4.4.2 neither on smoothconnect nor on openconnect. it connects as usual and I can see some traffic packets are being transfered but I can only surf google serch, youtube and some other stuff like play store and whatsup. whenever I try to surf any other website like for example bbc news the browser( chrome, opera, Dolfin..) just waits and then ends up with nothing like there is no internet connection!
Click to expand...
Click to collapse
I can take a look at this to see what is happening. Just start up tcpdump to capture the tun0 traffic (see above instructions), then try visiting the BBC news site and maybe a few other non-working sites. Then hit control-C to interrupt tcpdump, make sure there is some data in the pcap file, and email me the pcap file.
cernekee said:
I can take a look at this to see what is happening. Just start up tcpdump to capture the tun0 traffic (see above instructions), then try visiting the BBC news site and maybe a few other non-working sites. Then hit control-C to interrupt tcpdump, make sure there is some data in the pcap file, and email me the pcap file.
Click to expand...
Click to collapse
Hi,
I don't know how to make Tcpdump on my note3 not to mention hitting the control-c on andriod. what instruction did you mean?
msm88now said:
I don't know how to make Tcpdump on my note3 not to mention hitting the control-c on andriod. what instruction did you mean?
Click to expand...
Click to collapse
Do you have a friend who is familiar with ADB, rooting phones, etc. who might be able to help out in person?
You could also try something like Shark for Root, or follow this video. Make sure you capture on the tun0 interface so that we can see what is happening on the VPN tunnel. If you capture from the wifi interface you'll still see traffic, but everything will be encrypted so it will not be possible to diagnose the failure.
I got it. first I rooted my note3 then I followed the instruction in the video and here it is, I hope it's what you asked me for. waiting for your diagnosis, fingers crossed
msm88now said:
I got it. first I rooted my note3 then I followed the instruction in the video and here it is, I hope it's what you asked me for. waiting for your diagnosis, fingers crossed
Click to expand...
Click to collapse
According to this trace (partial screenshot attached), the Note 3 is advertising an MSS of 1460 bytes on IPv4 TCP connections. This looks abnormally high for a VPN interface; the other direction is using an MSS of 1380, which looks more realistic. The MSS for IPv4 would normally be the tun0 MTU minus 40 bytes. I am assuming this means the MSS is being computed from the 1500-byte wlan0/eth0 MTU, not the smaller tun0 MTU.
When Google fixed the MSS bug in Android 4.4.1, they left the following comments in the changelog:
Code:
commit ca5b4e8d0d8219273ecf0961ed6e8c47ab5d798a
Author: JP Abgrall <[email protected]>
Date: Wed Nov 20 17:27:01 2013 -0800
SecondaryTableController: force the MSS to match pmtu on TCP SYN
Without this change, the VPN sets up a tun/ppp that needs a small
MTU, and during TCP SYN the MSS will end up matching the outgoing iface
MTU which is potentially too big.
This leads to connection flakiness. The wrong MSS is visible by
tcpdump-ing on the tun/ppp device.
With this change, the MSS now is correct.
[b]It requires the kernel to be configured with
CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
If kernel is not configured, it silently fails.[/b]
Bug: 11579326
Change-Id: I254d8c39435b92dff91931e461e1efb8b35f6b1e
Note the bolded sentences (emphasis mine). I suspect that your device is running the latest AOSP netd code that has the fix (if the ROM is indeed based on AOSP 4.4.1/4.4.2), but the kernel may be missing the TCPMSS target. If you see an error when running this command as root, it probably means that kernel support is missing:
Code:
iptables -t mangle -A POSTROUTING -p tcp --tcp-flags SYN SYN -d 1.2.3.4 -j TCPMSS --clamp-mss-to-pmtu
Toward the bottom of the page on the original Android 4.4 MSS bug report I see a couple of reports from other Note 3 owners that the problem still isn't fixed for them, so it may be something particular to this device (such as the kernel configuration).
I do not see any evidence of IPv6 usage in your log, which rules out some of the known 4.4.2 VPN issues.
If this does turn out to be a kernel problem, you can try a custom kernel from XDA (assuming you can unlock your bootloader), or you could file a bug report with Samsung asking them to enable CONFIG_NETFILTER_XT_TARGET_TCPMSS=y in the next OTA update. From their end this is a simple, low-risk change.
cernekee;
Note the bolded sentences (emphasis mine). I suspect that your device is running the latest AOSP netd code that has the fix (if the ROM is indeed based on AOSP 4.4.1/4.4.2) said:
iptables -t mangle -A POSTROUTING -p tcp --tcp-flags SYN SYN -d 1.2.3.4 -j TCPMSS --clamp-mss-to-pmtu
[/code]
Toward the bottom of the page on the original Android 4.4 MSS bug report I see a couple of reports from other Note 3 owners that the problem still isn't fixed for them, so it may be something particular to this device (such as the kernel configuration).
I do not see any evidence of IPv6 usage in your log, which rules out some of the known 4.4.2 VPN issues.
If this does turn out to be a kernel problem, you can try a custom kernel from XDA (assuming you can unlock your bootloader), or you could file a bug report with Samsung asking them to enable CONFIG_NETFILTER_XT_TARGET_TCPMSS=y in the next OTA update. From their end this is a simple, low-risk change.
Click to expand...
Click to collapse
as you can see in the attachment I applied the code with no error message. so in this case I assume I have no problem with the kernel? right?
then what causes the problem? and what can I do in order to solve it?
msm88now said:
as you can see in the attachment I applied the code with no error message. so in this case I assume I have no problem with the kernel? right?
then what causes the problem? and what can I do in order to solve it?
Click to expand...
Click to collapse
Can you connect to the VPN, try to access a few "bad" sites, and then post the full output from:
Code:
su
iptables -t mangle -nxvL
cernekee said:
Can you connect to the VPN, try to access a few "bad" sites, and then post the full output from:
Click to expand...
Click to collapse
here is the output after some bad sites access, I also repeated the provisos code during an openconnect session. hope it will help us.
msm88now said:
here is the output after some bad sites access
Click to expand...
Click to collapse
Hmm, on my KitKat device I have an st_mangle_POSTROUTING chain which does the TCPMSS clamping:
Code:
Chain st_mangle_POSTROUTING (1 references)
pkts bytes target prot opt in out source destination
0 0 TCPMSS tcp -- * tun0 0.0.0.0/0 0.0.0.0/0 tcpflags: 0x06/0x02 TCPMSS clamp to PMTU
I did not see this in your output. Maybe Samsung is using an outdated version of netd.
Try running this command as root after bringing up the VPN and see if you are able to pass traffic with the bad sites:
Code:
iptables -t mangle -A POSTROUTING -p tcp -o tun0 --tcp-flags SYN,RST SYN -j TCPMSS --clamp-mss-to-pmtu
If not, post the new "iptables -t mangle -nxvL" output so we can look at the traffic counters.
Also can you attach your /system/bin/netd binary?
Thanks.
cernekee;
Try running this command as root after bringing up the VPN and see if you are able to pass traffic with the bad sites:
[code said:
iptables -t mangle -A POSTROUTING -p tcp -o tun0 --tcp-flags SYN,RST SYN -j TCPMSS --clamp-mss-to-pmtu
Click to expand...
Click to collapse
are kidding me!! it really worked. after I run the the code I tried to access all the bad sites and all of them worked!! but not as fast as my other mobil SG2. I noticed that it takes noticably much longer to access them. but still, It worked and It's fantastic!!
any ways, I rebooted my note3 to see if it will work again but it turned out it didn't! I need to re-enter the code again to make it work. now could you tell me what is my phones problem exactly? despite the re-entering issue I'm very happy that I finally can use internet on my note3 again thanks to you cernekee.
msm88now said:
any ways, I rebooted my note3 to see if it will work again but it turned out it didn't! I need to re-enter the code again to make it work. now could you tell me what is my phones problem exactly?
Click to expand...
Click to collapse
The ROM is supposed to add that rule automatically, but it doesn't.
If you attach your /system/bin/netd binary and output from "getprop" I'll try to figure out why.
cernekee said:
The ROM is supposed to add that rule automatically, but it doesn't.
If you attach your /system/bin/netd binary and output from "getprop" I'll try to figure out why.
Click to expand...
Click to collapse
here I attached them.
I posted a problem report on Samsung's support forum:
http://developer.samsung.com/forum/...&messageId=259244&listLines=15&startId=zzzzz~
Works like a charm with the lastest Slimkat on Nexus 4. Thanks a lot !
Just add a widget to one click connect from the launcher and it will be the best VPN apps that I've use.
Today I've a Tasker task to launch Anyconnect with uri and simulate touchs screen to automate my connection.
@ edit :
Is there a way to don't have the attached screen ?
An interesting read
Closing Open Holes
#JDevil#
With the spread of Hackers and Hacking incidents, the time has come, when not only system administrators of servers of big companies, but also people who connect to the Internet by dialing up into their ISP, have to worry about securing their system. It really does not make much difference whether you have a static IP or a dynamic one, if your system is connected to the Internet, then there is every chance of it being attacked.
This manual is aimed at discussing methods of system security analysis and will shed light on as to how to secure your standalone (also a system connected to a LAN) system.
Open Ports: A Threat to Security?
Now, which option is used to display all open connections on the local machine. It also returns the remote system to which we are connected to, the port numbers of the remote system we are connected to (and the local machine) and also the type and state of connection we have with the remote system.
For Example,
C:\windows>netstat -a
Active Connections
Proto Local Address Foreign Address State
TCP ankit:1031 dwarf.box.sk:ftp ESTABLISHED
TCP ankit:1036 dwarf.box.sk:ftp-data TIME_WAIT
TCP ankit:1043 banners.egroups.com:80 FIN_WAIT_2
TCP ankit:1045 mail2.mtnl.net.inop3 TIME_WAIT
TCP ankit:1052 zztop.boxnetwork.net:80 ESTABLISHED
TCP ankit:1053 mail2.mtnl.net.inop3 TIME_WAIT
UDP ankit:1025 *:*
UDP ankit:nbdatagram *:*
Now, let us take a single line from the above output and see what it stands for:
Proto Local Address Foreign Address State
TCP ankit:1031 dwarf.box.sk:ftp ESTABLISHED
Now, the above can be arranged as below:
Protocol: TCP (This can be Transmission Control Protocol or TCP, User Datagram Protocol or UDP or sometimes even, IP or Internet Protocol.)
Local System Name: ankit (This is the name of the local system that you set during the Windows setup.)
Local Port opened and being used by this connection: 1031
Remote System: dwarf.box.sk (This is the non-numerical form of the system to which we are connected.)
Remote Port: ftp (This is the port number of the remote system dwarf.box.sk to which we are connected.)
State of Connection: ESTABLISHED
Netstat? with the ? argument is normally used, to get a list of open ports on your own system i.e. on the local system. This can be particularly useful to check and see whether your system has a Trojan installed or not. Yes, most good Antiviral software are able to detect the presence of Trojans, but, we are hackers, and need to software to tell us, whether we are infected or not. Besides, it is more fun to do something manually than to simply click on the ?Scan? button and let some software do it.
The following is a list of Trojans and the port numbers which they use, if you Netstat yourself and find any of the following open, then you can be pretty sure, that you are infected.
Port 12345(TCP) Netbus
Port 31337(UDP) Back Orifice
For complete list, refer to the Tutorial on Trojans at: hackingtruths.box.sk/trojans.txt
----
Now, the above tutorial resulted in a number of people raising questions like: If the 'netstat -a' command shows open ports on my system, does this mean that anyone can connect to them? Or, How can I close these open ports? How do I know if an open port is a threat to my system's security of not? Well, the answer to all these question would be clear, once you read the below paragraph:
Now, the thing to understand here is that, Port numbers are divided into three ranges:
The Well Known Ports are those from 0 through 1023. This range or ports is bound to the services running on them. By this what I mean is that each port usually has a specific service running on it. You see there is an internationally accepted Port Numbers to Services rule, (refer RFC 1700 Here) which specifies as to on what port number a particular service runs. For Example, By Default or normally FTP runs on Port 21. So if you find that Port 21 is open on a particular system, then it usually means that that particular system uses the FTP Protocol to transfer files. However, please note that some smart system administrators delibrately i.e. to fool lamers run fake services on popular ports. For Example, a system might be running a fake FTP daemon on Port 21. Although you get the same interface like the FTP daemon banner, response numbers etc, however, it actually might be a software logging your prescence and sometimes even tracing you!!!
The Registered Ports are those from 1024 through 49151. This range of port numbers is not bound to any specific service. Actually, Networking utlites like your Browser, Email Client, FTP software opens a random port within this range and starts a communication with the remote server. A port number within this range is the reason why you are able to surf the net or check your email etc.
If you find that when you give the netstat -a command, then a number of ports within this range are open, then you should probably not worry. These ports are simply opened so that you can get your software applications to do what you want them to do. These ports are opened temporarily by various applications to perform tasks. They act as a buffer transfering packets (data) received to the application and vis-a-versa. Once you close the application, then you find that these ports are closed automatically. For Example, when you type www.hotmail.com in your browser, then your browser randomly chooses a Registered Port and uses it as a buffer to communicate with the various remote servers involved.
The Dynamic and/or Private Ports are those from 49152 through 65535. This range is rarely used, and is mostly used by trojans, however some application do tend to use such high range port numbers. For Example,Sun starts their RPC ports at 32768.
So this basically brings us to what to do if you find that Netstat gives you a couple of open ports on your system:
1. Check the Trojan Port List and check if the open port matches with any of the popular ones. If it does then get a trojan Removal and remove the trojan.
2. If it doesn't or if the Trojan Remover says: No trojan found, then see if the open port lies in the registered Ports range. If yes, then you have nothing to worry, so forget about it.
***********************
HACKING TRUTH: A common technique employed by a number of system administrators, is remapping ports. For example, normally the default port for HTTP is 80. However, the system administrator could also remap it to Port 8080. Now, if that is the case, then the homepage hosted at that server would be at:
http://domain.com:8080 instead of
http://domain.com:80
The idea behind Port Remapping is that instead of running a service on a well known port, where it can easily be exploited, it would be better to run it on a not so well known port, as the hacker, would find it more difficult to find that service. He would have to port scan high range of numbers to discover port remapping.
The ports used for remapping are usually pretty easy to remember. They are choosen keeping in mind the default port number at which the service being remapped should be running. For Example, POP by default runs on Port 110. However, if you were to remap it, you would choose any of the following: 1010, 11000, 1111 etc etc
Some sysadmins also like to choose Port numbers in the following manner: 1234,2345,3456,4567 and so on... Yet another reason as to why Port Remapping is done, is that on a Unix System to be able to listen to a port under 1024, you must have root previledges.
************************
Firewalls
Use of Firewalls is no longer confined to servers or websites or commerical companies. Even if you simply dial up into your ISP or use PPP (Point to Point Protocol) to surf the net, you simply cannot do without a firewall. So what exactly is a firewall?
Well, in non-geek language, a firewall is basically a shield which protects your system from the untrusted non-reliable systems connected to the Internet. It is a software which listens to all ports on your system for any attempts to open a connection and when it detects such an attempt, then it reacts according to the predefined set of rules. So basically, a firewall is something that protects the network(or systen) from the Internet. It is derived from the concept of firewalls used in vehicles which is a barrier made of fire resistant material protecting the vehicle in case of fire.
Now, for a better 'according to the bible' defination of a firewall: A firewall is best described as a software or hardware or both Hardware and Software packet filter that allows only selected packets to pass through from the Internet to your private internal network. A firewall is a system or a group of systems which guard a trusted network( The Internal Private Network from the untrusted network (The Internet.)
NOTE: This was a very brief desciption of what a firewall is, I would not be going into the details of their working in this manual.
Anyway,the term 'Firewalls', (which were generally used by companies for commerical purposes) has evolved into a new term called 'Personal Firewalls'. Now this term is basically used to refer to firewalls installed on a standalone system which may or may not be networked i.e. It usually connects to an ISP. Or in other words a personal firewall is a firewall used for personal use.
Now that you have a basic desciption as to what a firewall is, let us move on to why exactly you need to install a Firewall? Or, how can not installing a firewall pose a threat to the security of your system?
You see, when you are connected to the Internet, then you have millions of other untrusted systems connected to it as well. If somehow someone found out your IP address, then they could do probably anything to your system. They could exploit any vulnerability existing in your system, damage your data, and even use your system to hack into other computers.
Finding out someone'e IP Address is not very difficult. Anybody can find out your IP, through various Chat Services, Instant Messengers (ICQ, MSN, AOL etc), through a common ISP and numerous other ways. Infact finding out the IP Address of a specific person is not always the priority of some hackers.
What I mean to say by that is that there are a number of Scripts and utilities available which scan all IP addresses between a certain range for predefined common vulnerabilities. For Example, Systems with File Sharing Enabled or a system running an OS which is vulnerable to the Ping of Death attack etc etc As soon as a vulnerable system is found, then they use the IP to carry out the attacks.
The most common scanners look for systems with RAT's or Remote Administration Tools installed. They send a packet to common Trojan ports and display whether the victim's system has that Trojan installed or not. The 'Scan Range of IP Addresses' that these programs accept are quite wide and one can easily find a vulnerable system in the matter of minutes or even seconds.
Trojan Horses like Back Orifice provide remote access to your system and can set up a password sniffer. The combination of a back door and a sniffer is a dangerous one: The back door provides future remote access, while the sniffer may reveal important information about you like your other Passwords, Bank Details, Credit Card Numbers, Social Security Number etc If your home system is connected to a local LAN and the attacker manages to install a backdoor on it, then you probably have given the attacker the same access level to your internal network, as you have. This wouls also mean that you will have created a back door into your network that bypasses any firewall that may be guarding the front door.
You may argue with me that as you are using a dial up link to your ISP via PPP, the attacker would be able to access your machine only when you are online. Well, yes that is true, however, not completely true. Yes, it does make access to your system when you reconnect, difficult, as you have a dynamic Internet Protocol Address. But, although this provides a faint hope of protection, routine scanning of the range of IP's in which your IP lies, will more often than not reveal your current Dynamic IP and the back door will provide access to your system.
*******************
HACKING TRUTH: Microsoft Says: War Dialer programs automatically scan for modems by trying every phone number within an exchange. If the modem can only be used for dial-out connections, a War Dialer won't discover it. However, PPP changes the equation, as it provides bidirectional transportmaking any connected system visible to scanners?and attackers.
*******************
So how do I protect myself from such Scans and unsolicitated attacks? Well, this is where Personal Firewalls come in. They just like their name suggests, protect you from unsolicitated connection probes, scans, attacks.
They listen to all ports for any connection requests received (from both legitimate and fake hosts) and sent (by applications like Browser, Email Client etc.) As soon as such an instance is recorded, it pops up a warning asking you what to do or whether to allow the connection to initiate or not. This warning message also contains the IP which is trying to initiate the connection and also the Port Number to which it is trying to connect i.e. the Port to which the packet was sent. It also protects your system from Port Scans, DOS Attacks, Vulnerability attacks etc. So basically it acts as a shield or a buffer which does not allow your system to communicate with the untrusted systems directly.
Most Personal Firewalls have extensive logging facilities which allows you to track down the attackers. Some popular firewalls are:
ZoneAlarm: The easiest to setup and manage firewall. Get it for free at: www.zonelabs.com
Once you have installed a firewall on your system, you will often get a number of Warnings which might seem to be as if someone is trying to break into your system, however, they are actually bogus messages, which are caused by either your OS itself or due to the process called Allocation of Dynamic IP's. For a details description of these two, read on.
Many people complain that as soon as they dial into their ISP, their firewall says that such and such IP is probing Port X. What causes them?
Well, this is quite common. The cause is that somebody hung up just before you dialed in and your ISP assigned you the same IP address. You are now seeing the remains of communication with the previous person. This is most common when the person to which the IP was assigned earlier was using ICQ or chat programs, was connected to a Game Server or simply turned off his modem before his communication with remote servers was complete.
You might even get a message like: Such and Such IP is trying to initaite a Netbios Session on Port X. This again is extrememly common. The following is an explanation as to why it happens, which I picked up a couple of days ago: NetBIOS requests to UDP port 137 are the most common item you will see in your firewall reject logs. This comes about from a feature in Microsoft's Windows: when a program resolves an IP address into a name, it may send a NetBIOS query to IP address. This is part of the background radiation of the Internet, and is nothing to be concerned about.
What Causes them? On virtually all systems (UNIX, Macintosh, Windows), programs call the function 'gethostbyaddr()' with the desired address. This function will then do the appropriate lookup, and return the name. This function is part of the sockets API. The key thing to remember about gethostbyaddr() is that it is virtual. It doesn't specify how it resolves an address into a name. In practice, it will use all available mechanisms. If we look at UNIX, Windows, and Macintosh systems, we see the following techniques:
DNS in-addr.arpa PTR queries sent to the DNS server
NetBIOS NodeStatus queries sent to the IP address
lookups in the /etc/hosts file
AppleTalk over IP name query sent to the IP address
RPC query sent to the UNIX NIS server
NetBIOS lookup sent to the WINS server
Windows systems do the /etc/hosts, DNS, WINS, and NodeStatus techniques. In more excruciating detail, Microsoft has a generic system component called a naming service. All the protocol stacks in the system (NetBIOS, TCP/IP, Novel IPX, AppleTalk, Banyan, etc.) register the kinds of name resolutions they can perform. Some RPC products will likewise register an NIS naming service. When a program requests to resolve an address, this address gets passed onto the generic naming service. Windows will try each registered name resolution subsystem sequentially until it gets an answer.
(Side note: User's sometimes complained that accessing Windows servers is slow. This is caused by installing unneeded protocol stacks that must timeout first before the real protocol stack is queried for the server name.).
The order in which it performs these resolution steps for IP addresses can be configured under the Windows registry key
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\ServiceProvider.
Breaking Through Firewalls
Although Firewalls are meant to provide your complete protection from Port Scan probes etc there are several holes existing in popular firewalls, waiting to be exploited. In this issue, I will discuss a hole in ZoneAlarm Version 2.1.10 to 2.0.26, which allows the attacker to port scan the target system (Although normally it should stop such scans.)
If one uses port 67 as the source port of a TCP or UDP scan, ZoneAlarm will let the packet through and will not notify the user. This means, that one can TCP or UDP port scan a ZoneAlarm protected computer as if there were no firewall there IF one uses port 67 as the source port on the packets.
Exploit:
UDP Scan:
You can use NMap to port scan the host with the following command line:
nmap -g67 -P0 -p130-140 -sU 192.168.128.88
(Notice the -g67 which specifies source port).
TCP Scan:
You can use NMap to port scan the host with the following command line:
nmap -g67 -P0 -p130-140 -sS 192.168.128.88
(Notice the -g67 which specifies source port).
JDevil
Nice tutorial! Thanks!...But while having a look at the topic I had to smile... Vulnerabilities sounds better.
Lol exactly hahhahahah , thanks for the kind words
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Pretty amazing read, I'm impressed. What OS do you you on your home PC jeremyandroid? just curious?
js663k1 said:
Pretty amazing read, I'm impressed. What OS do you you on your home PC jeremyandroid? just curious?
Click to expand...
Click to collapse
Kali Linux, been a while bro, still got your badge I'm signature hahahha nice ,even though I havnt done anything in a long time but papers .
Tutorial version 1.0 by: Talbot *TBOT* Simons “Monsieurtalbot”
WHY?
I was looking around the internet a while ago for a good tutorial on this. Sadly, after many years no one had released one – and after many hours of testing I have managed install and run a mumble (murmur) server - from an Android device using a Debian compatibility layer app called Debian NoRoot. It took a lot of tinkering over a couple years to discover this working method - and it works really well.
There are many benefits to having your own Mumble server… not to mention one that fits in the palm of your hand and can be transported… Not to mention one that can act independently – INCLUDING a built in WIFI network and battery – but using this method, not only is it possible to take a private VOIP server everywhere you go – it’s possible for it to run really smoothly with any mid-range smartphone made after 2012. Broadcast your own WIFI network and connect with friends in a private offline chat within WIFI range…. Or connect to a WIFI network, forward a port from your router and expand the coverage to all of the internet… All with an old android you probably have lying around somewhere. Use it anywhere a walkie talkie might be needed, but not available. Text chat is also included and working – and it’s all as private as possible really… You are even able to encrypt your connection at that point – or simply host it locally and use it anywhere you have a large local network you can tap off of… Hotels & cruises – speak between rooms via the WIFI… etc etc. I can see this being implemented in places where internet is scarce and communication is needed… It will work on devices many people are discarding – and in a world where privacy is becoming scarce – it’s nice to know that the method of your communication is safe.
DISCLAIMER - MUST READ
I am not responsible for any data loss or device damage. Proceed at your own risk, though none of what we’re doing here should be considered risky. I’m not including pictures as I’m a busy man – but the process is quite simple and the instructions are quite exact. I think you’ll be fine.
This has been tested on several Android devices of various screen sizes and processor architectures going back to 4.0. It should work on most if not all devices. An old Android you have sitting in a drawer is a perfect candidate for this – not a bad thing to just keep installed on your personal device as well if you’re a power user like me. The program we’ll be using is able to run most if not all Linux apps … A lot of possibility here. No root is required for most of the features to work in this tutorial. Root isn’t needed if you are on an unlocked device, or if you have tethering provisioned on your wireless account. Tethering is only needed if you plan on using the device to broadcast a WIFI network to make it truly independent from a WIFI router.
Some features of the server may or may not be broken, I personally don’t require much besides a server with no password. If anyone runs into any issues down the road, please let me know!
Click to expand...
Click to collapse
With that being said – let’s begin.
___________________________________________________________________________________
INSTALLATION -
1. Download the following apps from the Play Store on your Android “server device”.
1. Debian NoRoot – The Debian linux environment (takes about 900MB space on internal SD)
2. Plumble – (mumble client) either free or paid version is fine.
3. Fing – Network tools for scanning IPs and networks.
ALSO EITHER:
Stock WIFI hotspot feature (if you have active wireless service)
OR
WIFI Tether Router – (requires root) allows for WIFI networks to be created without a WAN connection.
OR
If you just want a local server hosted and want to use your home router (with or without port forwarding for WAN access to your server) – you can do that too.
Click to expand...
Click to collapse
2. Open the Debian NoRoot app you just downloaded – let it install and set your DPI and font scale to whatever is best for your device. Typically messing with the stock settings won’t do much good for you.
3. Open the terminal that is found on the desktop of Debian, or open it from the menu if your screen is small. Execute the following commands:
sudo apt-get update
(wait for the process to finish - accept any dependencies with Y)
sudo apt-get upgrade
(wait for the process to finish - accept any dependencies with Y)
sudo apt-get install mumble-server
(accept any dependencies with Y – there will be some errors, ignore them.)
sudo dpkg-reconfigure mumble-server
(Autostart: Yes, High Priority: No, Then set the super user password when prompted.)
sudo nano /etc/mumble-server.ini
(This is where you’ll edit the server info – there is much documentation on setting up a mumble server and configuring this file elsewhere on the web… Things like server name, welcome message, server password – etc etc are located in this setting file. Save the file and go back to the terminal.)
sudo /etc/init.d/mumble-server restart
(That’s it, the server should now be running with your new settings in the background. There is no UI and no icons that pop up.)
Click to expand...
Click to collapse
4. Once this is done – keep in mind even though you set the Autostart it is not going to work in this environment – so you will need to manually start the process via it’s script file – so lets create a shortcut to it on the desktop to make starting the server easier.
The script file is located at:
Code:
/usr/bin/murmur-user-wrapper
“Two finger tap” the file and “send to -> Desktop (create link)”
You will now double click this desktop link to start your server after you open the Debian Environment.
5. You can now press the home button to put the Debian environment in the background. Open the “Plumble” app you downloaded *on the same device* and set up a new server with the following settings:
Label : LOCAL SERVER
Address: 127.0.0.1 - leave the port as 64738 or change it as you like.
Username: Whatever you want – I used ADMIN for the server device.
Password: leave blank unless you set it up in the settings file.
Click to expand...
Click to collapse
Once you save the server if should show as online. Connect to it and change the default audio setting to push-to-talk in Plumble settings… If you don’t see it online, restart the phone, or some devices require to be connected to some form of network before the server will show as online. See the next step.
5. Once the server is running you have a number of options on how you can set it up and connect to it. – if you aren’t seeing the server – attempt the following - either step A, B or C first before ripping your hair out.
A. Connect to a WIFI network – set a static IP for your network in Android WIFI settings… You can then use it locally… or you can forward the port you used in the last step to the static IP you set in your router’s settings.
B. Broadcast a stock android hotspot – if you have active wireless service and tethering provisioned or an unlocked device – if you don’t, some custom Android roms will activate and broadcast a network anyway, some won’t… depends on device – your mileage may vary. This is cool for direct device to device communication but will not allow you to use it over the internet. Wireless carriers block a lot of ports incoming.
C. Open WIFI tether router – set it up based on your device. This app requires root but is the most likely to work in a completely offline scenario with no available external WIFI network or when you don’t have service but want to turn a couple phones into walkie talkies in the grocery store. Option B and C are very similar in function but C works with no service – in a plane, a cruise ship, the middle of nowhere, etc etc.
Click to expand...
Click to collapse
6. At this point – we can start connecting other devices… Either get the mumble client for PC/Mac or download “Plumble” and “Fing” on another android device. iPhone also has free mumble clients and network scanners.
7. Open “Fing” on the server device and run a scan if you are on a WIFI router network. Note your server device’s IP address and confirm that the devices you are trying to have connect have an IP address themselves. You may need to run “Fing” or another network scanning app on the secondary device to determine the server device’s IP address… Especially if you are doing this with option B or C for connection.
8. Open Plumble (Android) or your PC/Mac/iOS mumble client and configure it to the server IP you determined in the last step… As long as they are on the same network you should see the server online… Connect and set the push to talk setting on the second device. You should now be able to chat between the server device and the secondary device… and you should be able to connect multiple others as well.
9. Reboot the device.
10. At this point It’s 100% installed and ready to go. The server boot process to recap is quite simple.
- Connect the server device and secondary devices to the same network, hotspot, whatever.
- Open “Debian NoRoot” from a fresh device boot. Sometimes a fresh boot is needed for the server to run properly.
- Once Debian environment is fully loaded, two finger click the shortcut we created for the murmur server and choose the top option – “execute”
-Open Plumble on the server device and connect to the local server profile you created
- Determine the server’s IP address based on how you connected and set up the client devices.
- PROFIT.
Click to expand...
Click to collapse
I hope you enjoyed this tutorial and find it useful – if anyone takes these steps, please help the community and provide screenshots that I may add to this post. The information was sourced and pieced together from so many places… I’d like to thank… Google search - as well as the developers behind the apps used in this tutorial. I'm amazed that after all this time something just clicked and low and behold - it works!
Cheers and best wishes all!
Just an update - this is surprisingly stable, and I have had a server running on an old android device for over 2 weeks with no downtime.
Awesome work! I've been debating trying to port Murmur to Android for a while now as I have an Android STB sitting around that would make a perfect server.
zyperion said:
Awesome work! I've been debating trying to port Murmur to Android for a while now as I have an Android STB sitting around that would make a perfect server.
Click to expand...
Click to collapse
There's already an armhf distro for murmur on debian... This is actually still working great. It's the only reason this works... Same package for the raspberry pi. =]
Any app for Android that allows you to boot I to a chroot Linux environment this will work on...
Sent from my LG-US996 using Tapatalk
Yeah, it's a very clever solution that seems to be working pretty well. I'll have to give it a try! I've also been looking into trying to get Ubuntu installed on my Minix Neo X5 instead since I don't have any need for it as a media box anymore which makes Android far less desirable than a functional Linux install.
Hi all,
As part of a class I'm doing, we are required to post some content to a forum to engage in discussion on security:
.
Cross Site Scripting (XSS)
OWAPS describes Cross Site Scripting (XSS) where a website has been marked as a trusted website, which for some reason, can run malicious code or scripts through inputs such as forms. As the end user’s browser sees this site as trusted, it allows the malicious script or code to execute, which can give access to client side information before it is encrypted (such as usernames, passwords, session IDs, cookies, etc).
In PHP for example, a normal input box where a user would enter their name, would be able to enter the following:
When PHP prints this back out after submission, it will execute the script between the script tags (In this case, just a simple popup).
In this scenario, this can be solved by wrapping the input value with htmlentities:
This would print any script as literal text rather then executing it.
In Java,
XSS is still a major issue, both due to some sites not implementing simple work around such as htmlentities or htmlspecialchars, or for reasons where these cant be used. XSS affects PHP applications by as much as 86% - its PHPs biggest vulnerability.
In Java, the easiest method is to simply validate inputs and to encode special characters (<>[email protected]#$%^&*). Alternativley, OWASP have a XSS class which includes easy methods to best prevent against certain types of XSS.
Code Injection
Code injection is where using the sites scripting language, you can inject (rather, have the site pull) code from somewhere else.
For example, php can call one of its own pages like so:
however, if we replace the contact.php page with an external hosted script:
This will cause the enduser to execute that script. This all comes down to PHP validation which is coded within the PHP to ensure only valid respsonses are accepted.
This is unlike command injection. Command Injection is an attack which is designed to execute commands on the PHP hosted system (server). This can be done where most parameters are passed (headers, input boxes, etc) and will typically display any output on the returned webpage.
For example, to return a password for a certain user, you could use a command like:
Typically, to prevent such commands from executing, a whitelist of command can be made, whereby only those listed are allowed to be executed on the server. Alternativly, it is recommend where the application needs to invoke system side commands, to do this through local python scripts, rather then PHP calling the commands.
CRLF injection
CRLF injection comes from the elements CR (Carriage Return) and LF (Line Feed) – together (CRLF) this denotes a new line (done simply by pressing the enter button). If a website for example, allows you to upload a file, an attacker may name this file as follows:
This would result in a system command being carried out to delete everything in the /bin folder.
It also allows an attacker to write to the log file, by creating it own new line. If the logs are configured in such a way that they will email out any WARNINGS or ERRORS, an attacker may add these to a new log line repetitively, backing up the email and bandwidth.
The simple way around this is for JAVA to sanitise any input strings, either through substituting known commands, or through methods such as
SQL Injection
.NET SQL Injection allows an authorised SQL command to be sent to the SQL server and executed.
An SQL string may be built using inputs from a form. A possible example of this is:
Code:
SELECT email, passwd, login_id, full_name FROM members WHERE email = 'formemail';
where the red is the text from an input field.
However, we can modify this string which can allow some malicious stuff to happen:
Code:
SELECT email, passwd, login_id, full_name FROM members WHERE email = 'formemail'; DROP DATABASE members --';
Adding the red text to the email input box, would allow us to delete the whole table, or alternatively insert a new record into a table, or possible delete records, modify records (change passwords), or even delete whole tables.
To prevent this, you can limit the damage an SQL injection can do you using proper database permissions (deleting records, tables, etc), and to also use good sanitisation – look for -- or ; in any field and invalidate the data if it has these characters.
Directory Traversal
Directory traversal can also be referred to as a “dot dot slash” attack.
In php, a resource (page) can be called as follows:
However, it may be possible to get other files, not even part of the web directory using the following examples:
The easiest way to prevent this is to assign proper permission on the server itself. However, many web developers do not own the server, therefore, another layer of protection is fully qualify the file path, with the root being where the webpage sits.
Connection String Injection
Also known as connection string pollution, it is possible for an attacker to inject parameters into a connection string to a database. Typically a connection string is built by delimiting each value with a comma. In an injection attack, strings can be built using semi colons as a delimiter.
A typical connection string to a windows SQL server may look like the following:
Code:
Data source = SQL2005; initial catalog = db1; integrated security=no; user id=+’User_Value’+; Password=+’Password_Value’+;
However, if an attacker places a rouge windows SQL server on the internet, and then uses a connection string like follows:
Code:
Data source = SQL2005; initial catalog = db1; integrated security=no; user id=;Data Source=Rogue Server; Password=; Integrated Security=true;
This allows the target windows SQL server to connect to the rouge server using its own Windows credentials, exposing much data.
Backdoors
Backdoors can be common within applications and web applications and can occur across many types of frameworks, however, it’s the security around the knowledge of backdoors, and what they allow, which can be of concern. All modems, routers and some managed network infrastructure have administrator usernames and passwords. However, sometimes, the network vendor (CISCO, NETGEAR, etc) or ISP may choose to put a backdoor access onto these devices. This may be in case a user forgets their administrator credentials, for automatic firmware updates, or for remote troubleshooting. Some of these backdoors may allow for more settings then what is normally shown to an end user.
For example, some older Optus supplied modems had the hidden user: Admin, and a password of: Y3S0ptus. This was standard across thousands of supplied modems. The problem was, the end user had no way of changing the default setting for remote web access from Enabled to Disabled, which meant anyone that knew of their IP address or domain name, could now remote access their modem router, add port redirects, and now connect to devices within their LAN.
In the case of ISP provided modems, it might be safer to simply by something else, not supplied by the ISP.