Healthy peers, delving into the phone I found a file called CDMAPhoneDump.exe, that used to be an endorsement of hacerl Phone Phone Radio, I have mine that can not be used in CDMA mode to see if I can pass on that file generated by the phone and be able to regain the functionality of CDMA, greetings and hugs
Related
Hi All,
I know it is possibile to trace/track a GSM mobile telephones location all over the world.
I also know some compaines does this for chargeable service.
I am VERY interested in getting this for free! (I bet you are also).
Anyone know how to do this without empty our pockets??
Thanks,
in fact, i have the same interest.
who wouldnt love to know how to do this?
The only information you can get out of your own phone, is the ID of the basestation it is attached to. This is held in a register in the phone internals that can be read via the RIL interface.
It is also stored in the SIM. If the phone is totally powered off it will attempt to connect to the last known good base station on power on. (Quicker than sniffing around all available frequences for an suitable station.)
While a change of basestation could be detected by software running on a phone, only the Telco's database has the location of all active phones, so they can inform the basestation to contact your phone if there is an incoming call or data.
This data is theirs and theirs alone. It is valuable and confidential, hence the charge for any use of it.
In short all you can find out from your phone is where it is. But you know that anyway.
Erm... I just wrote this and then I realized that you want to track the device via GSM and not GPS. This will only work with GPS (can be activated in the background), sorry.
Just look for an application that allows you to track your device if its stolen. Some of the programs still work after changing simcard (which is not really interesting if it did not get stolen in the first place...). If everything is set up, you can easily receive a sms with the current location (you need to activate the programm by sending a sms).
If you need to know the exact position of the device like every second, you can use a jogging-trainer which logs the speed etc. But this will only store the positions on the device (you can upload them to your computer, but this can probably not be done via any wireless connection.
My english is not the best, I am sorry. But I am sure you're gonna understand everything ;D And no, I don't know any programs name because I don't use them.
XphX
Stephj, are You talking about GSM or CDMA? Because for GSM I know for sure that the Telco knows a bit more - at least it is possible to triangulate the user's approximate position using three or more base stations (and probably user's signal strength for each base station too). So the DB should hold more info about the base stations available to user's current position, as for example "ready to go base stations" or something like that.
For tracking the phone, you can try GLympse or LookOut, Look out is better if you loos your phone, it synchronize with their website, and can see the location on the phone anywhere in the world, even can delete your data from your web account on look out.
I am currently on AT&T using the TILT (WM 6.1).
There are very few things I like about my TILT. However the biggest thing is tethering and using it as a wifi access point - which I enjoy freely.....
It is my preference to stay on AT&T because I would like to keep my TILT as a back up - insert my SIM from whatever new (Android) phone into it to use its tethering and wifi access point ability.
I was interested in the iPhone (4) but because it uses a micro sim, that rules out any degree of cross compatibility I need with my SIM card.
My next move is to change phones to an Android. My case for Android is simple : I need a phone I can set up for both tethering and as a wifi access point. The iPhone allows tethering but at an added price. The iPhone does not allow for wifi access point usage. I am interested in the Samsung Galaxy S. I have some questions:
1. Has anyone been successful in setting up an Android, particularly AT&T Samsung Captivate for tethering and as a wifi access point?
2. I understand AT&T does not allow non-market apps onto the phone. So if you are a Captivate user how can this be accomplished?
3. If you have accomplished this and you are not an AT&T Samsung Captivate user, please tell me what carrier you are with and how you accomplished it.
I am aware of a process called rooting. I am no techie and don't wish to risk bricking my phone. I am also aware that Android 2.2 will provide tethering (or is it wifi access point capability?). Which carrier will allow or support this? Or how can a user enable these features?
Is anyone aware as to which carriers will either allow this or present the least barriers for a users work around?
I am open to switching carriers, but as I said, I do like using my SIM and sticking it back into my TILT to use the tethering or wifi access point if I am not able to use these features in a replacement phone without paying exhorbitant prices. Mind you, I am grandfathered into AT&T's unlimited data plan. The unlimited data plan and wifi access point will be handy when I purchase the iPad or use the phone to allow other devices to connect via wifi.
I used internet connection sharing on my Blackjack a few times. It was a pretty nice option to have. I just bought a Captivate on the 29th and was hopping to find something similar. My assumption is that you will have to root your phone to get by AT&T's road blocks. You will, at the very least, have to get a program to help you side load cause AT&T has blocked that and they have also blocked certain apps from showing up in the market.
I went from the Tilt to the Backflip (which I wouldn't recommend because of so many better Android phones). I also enjoyed the freedom to tether. With an unrooted Android phone using PDAnet (have to have installed on pc & phone) I've been able to tether no problem.
Don't remember off-hand if it shows up in the Market. If not, you'll have to use something like Droid Explorer to install it. Not a hard process, even for a non-techie. HTH
Sent from my MB300 using XDA App
Yeah, after posting that I did some searching. There is PDAnet and Easytether. AT&T blocks both from the market but you just have to take out your SIM card and then connect to Wi-Fi and they'll show up.
@lillejord. Do I understand you correctly? Even though AT&T may block applications from appearing at the AT&T Android Market, you remove the SIM and then navigate to the AT&T Android Market and - bingo! The otherwise errant applications are available to both download and install?
Can't comment about the US-specific versions of the SGS... I have an SGS I9000 bought in Hong Kong (it's unlocked, unbranded etc)
It is on Android 2.1 (Eclair) and it already has the WiFi AP functionality built in (I've used it... worked fine)... Settings -> Wireless and Network -> Mobile AP settings
As for using it "tethered" (ie. via a USB cable), when you plug it in (assuming you've set the "Ask on connection" option), it gives you 4 options:
- Samsung Kies
- Media Player
- Mass Storage
- PC Internet
The last one lets you use the phone's data connection...
There is also a 3rd option, within the Samsung Kies application, there is a "Tethering" applet, that also lets you use the phone's data connection, but it allows you to configure a whole bunch of stuff and you can create multiple data connection profiles etc...
Not sure exactly how ATT does their data plans between different phones. But isn't the android "specific" plan different than the standard smart phone plan as far as how the phones work and switching sim cards/cost.
I know that when I had my T-mo MDA (HTC Wizard) I could tether (either via usb or bluetooth) and use as a wireless access point), so the Tilt (in theory) should be able to work the same) unless the ATT/their software, crippled it. Once again, not sure how ATT has their network set.
-- Not to go OT from the thread, if so, I apologize.. but I was wondering, if you have a WM powered phone, running Android, does the internet plan change or stay the same/work properly.
To answer your question, using the internet on an Android ROM running on a WinMo phone works properly without the need to manually change any settings. At least it worked for me. I ran Android on my T-Mo US Touch Pro2 and used the web browser with no issues. I can't comment on how/if it would work with another phone/carrier so YMMV.
Sent from my T-Mobile myTouch 3G Slide using XDA App
I have the HTC G2 Android running on version 2.2 through T-mobil
I used to have cable through COX but discontinued it as I am able to use the phone as a hot spot with tethering. I can connect multiple machines via this hotspot. It is a 4G phone, and runs at 14.4 (mbps I think).
I didn't do anything special to the phone, and the hotpot is a simple selection of the settings.
Hope this helps (Arizona)
search Wifi Tether apk
It need kernel supported. Most of 2.1 kernel not ready.
SIM removal is not needed.
1.Turn off WiFi
2.Turn on Airplane Mode (Turns off SIM id Google allows all apps now at step 3)
3.Turn on WiFi
4.Download At&t banned apps from the Market
Hi all,
I've got an android device without any phone chip or any phone module.
Since this is a weird project I don't know where to post it and I've posted here... I'm sorry if I've chosen the wrong section.
Anyway, my idea is:
USB Internet keys (dongles) should contain a phone module (GSM/UMTS/HSDPA) that is used for estabilishing data connections....
Normally at least 99.9% of the people are using their phones as WiFi HotSpot or as an USB Tethering device without using an USB internet key for connecting to the internet with a SIMCard.
I'm searching infos on doing this weird thing: USB internet key as a phone module
The only thing is that I can't find any info on that and I don't know if USB GSM/UMTS/HSDPA modems are able to work as phones. I mean, they can be connected to a mobile operator without an active connection, so maybe they can be used as phones.
In less words...
Project: USB internet key as a phone for an android device that hasn't got a phone module
Is it possible hardwarewise?
If it is, I'll start the development.
Thanks!
Long Version:
I can only speak for the carriers I have dealt with myself (Sprint, AT&T, Verizon)
But, this is a topic that angered me a while back.
With my Sprint Wireless cards, I used to be able to set laptops up to send and receive faxes with them, and did on a regular basis for about 5 of my end users.
About two years ago, I tried to switch to AT&T thinking everything would be the same. I spent hours and hours trying to figure out why it wouldn't work with the new carrier before I finally threw in the towel and called AT&T tech support. Within seconds I had my answer "we don't support switched calls on data cards". This meaning that no actual calls in or out from the card were possible.
Fast forward a couple weeks, I switched a few users back over to Sprint because they really liked being able to send and receive faxes from anywhere. Low and behold, Sprint has followed suit and disabled the feature also. So I call Verizon to see what their capabilities are, same thing.
So it seems to be the industry standard now (at least in the US) to not allow this type of service anymore. I have no idea why, it honestly seems stupid to me to disable what I consider to be 50% of the functionality of the device/service... But it is what it is.
Short Version:
3G data connection: probably(depending on driver support)
cellular/dial connection: probably not
Hello All,
I want to use my S3 as an engineering device, i.e. i want to be able to capture the readings from my modem and RIL such as cell broadcast power, location, switch 2g/3g and all other relative info and be able to extract that to the pc directly or see them on the pc in realtime,
Can anyone please advise how can i do this?
Many Thanks
I'd suggest making an app that gives you this info....to get started on that, I'd look through CM's ril source as they interface directly with the modem and work with the raw data that it posts
Nickthegr8 said:
Hello All,
I want to use my S3 as an engineering device, i.e. i want to be able to capture the readings from my modem and RIL such as cell broadcast power, location, switch 2g/3g and all other relative info and be able to extract that to the pc directly or see them on the pc in realtime,
Can anyone please advise how can i do this?
Many Thanks
Click to expand...
Click to collapse
There is a pppd-ril option in the kernel, hope that helps.
Hey,
I'm sure you all read about the "mysterious cellphone towers" across the USA (maybe it's an extended practice by now). But i wonder why no one is developing an external or modular device to detect and differentiate between fake and regular towers. Or even detect anomalous radio frequencies on the environment, that I'm pretty sure It's being exploited for a different purpose than phone interception.
Is there any device, addon or software out there (that isn't that expensive android phone) to attempt to find any of these anomalies?
Can't post the link to the article but here is without http
popsci.com/article/technology/mysterious-phony-cell-towers-could-be-intercepting-your-calls