Hello and welcome to my thread:
Im working on this ROM when tas0s upload his cm7 and i need only repair the FM Radio
Kernel: 2.6.32-9 [Thank to Anryl ^^]
Mod version: Cyanogen Mod 7.1.0
Android Version: 2.3.5
Working:
RIL
Audio
Bluetooth
Wi-Fi
Wi-Fi Hotspot
Key lights
Sensors
D-pad
OC Kernel (122-710MHZ)
SDCard mount via notification bar (only read file)
GPS
AGPS
Framework
Camera
Video recording
Calibration support [Thanks to Tas0s,Anryl and joilaroi]
Not Working:
Only FM Radio
Flash gapps before install the rom
Links:
ROM:Final 2
GAPPS:http://www.mediafire.com/?o8yaz69uz7qji23
Drivers:http://www.mediafire.com/?kdjuehh9rwkhozl
Amonra 2.3[Use this for this ROM, Dont flash, install via fastboot]
I test it on my U8100 try on your u8110/20
If u discover any bug please report it.
I will try to update the ROM each one week
If u Like my work press Thanks
Reserved for later
Will try !
Your link for drivers is the same like the link for Amon RA ... Please change that
In this ROM, can Barcode reader and Google Goggles work with the camera?
When so, what have you done to fix it?
sources
Could you please publish your changes to the kernel and to the CM7 sources?
It would be nice when you publish your updates on Github. Having the actual source in github may help sorting out the remaining problems.
Thanks in advance,
Paul
(the same request has been posted on the treads of Anryl and jollaroi).
p.s.
You may not realise, but the U8160 kernel sources were published by Huawei in compliance with the GPL after some pressure on Vodafone by gpl-violations.org. The very same license requires that further modifications, including those to the build configuration, are published also.
no overclock for me
first,thank you very much for your work it is great.The only thing that i had trauble with,was that i had to flash no overclock zip from anryl, because the phone was always getting stuck at huawei logo,and also there is another problem with wifi it doesn't work.please could you take a look at it? thank you
P.S: send from huawei u8110
jmcc30 said:
Hello and welcome to my thread:
Im working on this ROM when tas0s upload his cm7 and i need only repair the FM Radio
Kernel: 2.6.32-9 [Thank to Anryl ^^]
Mod version: Cyanogen Mod 7.1.0
Android Version: 2.3.5
Working:
RIL
Audio
Bluetooth
Wi-Fi
Wi-Fi Hotspot
Key lights
Sensors
D-pad
OC Kernel (122-710MHZ)
SDCard mount via notification bar (only read file)
GPS
AGPS
Framework
Camera
Video recording
Calibration support [Thanks to Tas0s,Anryl and joilaroi]
Not Working:
Only FM Radio
Flash gapps before install the rom
Links:
ROM:Final 2
GAPPS:http://www.mediafire.com/?o8yaz69uz7qji23
Drivers:http://www.mediafire.com/?v3gdigm1dnzccud
Amonra 2.3[Use this for this ROM, Dont flash, install via fastboot]
I test it on my U8100 try on your u8110/20
If u discover any bug please report it.
I will try to update the ROM each one week
If u Like my work press Thanks
Click to expand...
Click to collapse
Te estay pasando compadre... un abrazo y felicitaciones por poner nuestra bandera en los sitios internacionales.
Yo estoy en lo mismo que tu, pero lidiando con el acelerador por hardware del chip Rk2818 en el 2.3.5 aca http://forum.xda-developers.com/showthread.php?p=13503105, ¡¡no podemos ver videos!!
¿Tu device tiene aceleracion por hardware?
u8110 not booting. i guess i know the reason but u should contact anryl how he fixed it.
as far as i know its about the default OC value, some phones are 528mhz some are 600mhz
u8110 are defauly 528mhz and have no ability to boot with 600
the list would be 320 480 528 633.6 652.8 672 691.2 710.4
DJ_Uro_UE said:
Your link for drivers is the same like the link for Amon RA ... Please change that
Click to expand...
Click to collapse
Changed
Gjole86 said:
u8110 not booting. i guess i know the reason but u should contact anryl how he fixed it.
as far as i know its about the default OC value, some phones are 528mhz some are 600mhz
u8110 are defauly 528mhz and have no ability to boot with 600
the list would be 320 480 528 633.6 652.8 672 691.2 710.4
Click to expand...
Click to collapse
My u8110 runs this rom and boots with 600mhz. and I'm gonna try to raise the clock to 633 or 652 and see if it boots
poruid said:
In this ROM, can Barcode reader and Google Goggles work with the camera?
When so, what have you done to fix it?
Click to expand...
Click to collapse
I dont know, because i never use barcode and google goggles, can someone test it?
Gjole86 said:
u8110 not booting. i guess i know the reason but u should contact anryl how he fixed it.
as far as i know its about the default OC value, some phones are 528mhz some are 600mhz
u8110 are defauly 528mhz and have no ability to boot with 600
the list would be 320 480 528 633.6 652.8 672 691.2 710.4
Click to expand...
Click to collapse
italianospn said:
first,thank you very much for your work it is great.The only thing that i had trauble with,was that i had to flash no overclock zip from anryl, because the phone was always getting stuck at huawei logo,and also there is another problem with wifi it doesn't work.please could you take a look at it? thank you
P.S: send from huawei u8110
Click to expand...
Click to collapse
The same problem have my friend, but he install with clockwork mod 4, and he runs my rom
Clockwork Mod 4.0:http://android.podtwo.com/recovery/recovery-clockwork-4.0.1.5-u8160-update_signed.zip
Ps:flash like a ROM, WITHOUT wipes
DaremoS said:
Te estay pasando compadre... un abrazo y felicitaciones por poner nuestra bandera en los sitios internacionales.
Yo estoy en lo mismo que tu, pero lidiando con el acelerador por hardware del chip Rk2818 en el 2.3.5 aca http://forum.xda-developers.com/showthread.php?p=13503105, ¡¡no podemos ver videos!!
¿Tu device tiene aceleracion por hardware?
Click to expand...
Click to collapse
No, la verdad es que mi cell no tuene GPU ni menos tendra aceleracion xD, pero busca un device parecido a ese, de la misma marca , porque a veces tienen los mismos drivers.
jmcc30 said:
The same problem have my friend, but he install with clockwork mod 4, and he runs my rom
Clockwork Mod 4.0:http://android.podtwo.com/recovery/recovery-clockwork-4.0.1.5-u8160-update_signed.zip
Ps:flash like a ROM, WITHOUT wipes
Click to expand...
Click to collapse
I just flashed this rom and now my MIN CPU frequency is 153 and Max CPU frequency is 691. The rom is working very well on u8110.
Edit: Only issue I've noticed now is that the internal SD of the phone doesn't mount, and that the external SD is mounted in its place when the phone is connected to the pc (even when you don't choose to mount it, and when you mount it nothing changes, then when you unmount it, the internal SD is still not mounted)
The good thing however is that the external SD is readable and writable so there's no need to use QtADB
Oscuras said:
I just flashed this rom and now my MIN CPU frequency is 153 and Max CPU frequency is 691. The rom is working very well on u8110.
Edit: Only issue I've noticed now is that the internal SD of the phone doesn't mount, and that the external SD is mounted in its place when the phone is connected to the pc (even when you don't choose to mount it, and when you mount it nothing changes, then when you unmount it, the internal SD is still not mounted)
The good thing however is that the external SD is readable and writable so there's no need to use QtADB
Click to expand...
Click to collapse
You must install the drivers first, and connect the phone, but only connect, dont choose ''mount to pc'' on notibar, wait some seconds and it will run
jmcc30 said:
Changed
Click to expand...
Click to collapse
still links to amon ra
jmcc30 said:
You must install the drivers first, and connect the phone, but only connect, dont choose ''mount to pc'' on notibar, wait some seconds and it will run
Click to expand...
Click to collapse
I link to the drivers on your post only links to amon-ra recovery.
Also barcodescanner, google goggles, and flashlight all don't work and crash the camera along with them and you have to reboot to get the camera to work again. :/ Would be really nice if you found a fix because this rom is fine otherwise.
Thanks.
still the same
jmcc30 said:
The same problem have my friend, but he install with clockwork mod 4, and he runs my rom
Clockwork Mod 4.0
Ps:flash like a ROM, WITHOUT wipes
Click to expand...
Click to collapse
i tried to flash it with that recovery and i still have the same problem if you could please tell me the steps you follow to flash the rom i'll really apreciate it.
thanks
Can this rom run on U8150?
Related
Hi, yesterday i installed the CyanogenMod 7.1 for Galaxy Fit, everything was going great, but this mornig i have troubles registering with my 3G provider, if i reboot the phone, it registers, but about 2 minutes later it unregisters, so i had to reboot again, if i try to register manually, doesn't find the network.
I used the w3 euseuandroid dot com guide
edit 1: Sometimes it registers manually, but goes down with intermitence, drops signal about 1 minute later.
edt 2: if i check the "use only 2G networks" works fine, so i have no 3G
if anybody knows how to fix this issue i would be fully gratefull
p.d sorry for my english
-----------------------------------
Hola, ayer instalé el CyanogenMod 7.1 en mi Galay Fit, todo bien, muy bonito, pero desde esta mañana tengo problemas para que se registre en la red de TIGO, si lo reinicio, registra automaticamente, pero al cabo de unos minutos pierde la conexion y toca reiniciarlo de nuevo, al tratar de registrarlo manualmente no encuentra la red.
si alguien sabe algo como arreglar eso, le agradecería mucho
Edit: A veces deja registrar manualmente, pero sige con intermitencia, se cae la señal casi al minuto
Edit 2: si le doy a "solo usar redes 2G" no se cae.. o sea se dañó el 3g =/
Hey! Just install cm7 from here
http://forum.xda-developers.com/showthread.php?t=1324190
Its a new thread, recently added.the cm7 that u had installed had lot of bugs... this one is bugfree.
Sent from my GT-S5670 using XDA Premium App
Downloading and testing... THANKS A LOT
anshulsingh12995 said:
Hey! Just install cm7 from here
http://forum.xda-developers.com/showthread.php?t=1324190
Its a new thread, recently added.the cm7 that u had installed had lot of bugs... this one is bugfree.
Sent from my GT-S5670 using XDA Premium App
Click to expand...
Click to collapse
Bro...its not totally bugfree....it has some audio and video playback problem...i tried to fix it...u can check VISH'S CM7.1 forum to have a look at the fix...
Hope it works..!
galaxy fit + CM7.1 (2.3.7)
neil.richard said:
Bro...its not totally bugfree....it has some audio and video playback problem...i tried to fix it...u can check VISH'S CM7.1 forum to have a look at the fix...
Hope it works..!
galaxy fit + CM7.1 (2.3.7)
Click to expand...
Click to collapse
Agree with u! But now that uve fixed it,now it should be bugfree
sent from my galaxy fit + CM7 using xda premium app
Bugs found by me
I have found some bugs for CM7
- my Compass not normally, always abnormal on magnetic....
- I can't charge my phone in shutdown mode, always reboot when I connect to charger
-my fit based on XXKPL with deodexed...
sorry about my english
Si eres de latinoamerica primero flashea la rom kp6 2.3.4 que es para latinoamerica, luego el cwm y cm 7 respectivamente.
aya.yaya said:
I have found some bugs for CM7
- my Compass not normally, always abnormal on magnetic....
- I can't charge my phone in shutdown mode, always reboot when I connect to charger
-my fit based on XXKPL with deodexed...
sorry about my english
Click to expand...
Click to collapse
Compass is working fine for me. U can try caliberating compass, probably, that will fix your problem.
And the phone really doesnt charge when is turned off. Thats a new issue!
sent from my galaxy fit + CM7 using xda premium app
anshulsingh12995 said:
Compass is working fine for me. U can try caliberating compass, probably, that will fix your problem.
And the phone really doesnt charge when is turned off. Thats a new issue!
sent from my galaxy fit + CM7 using xda premium app
Click to expand...
Click to collapse
thanks 4 reply.. its work..
but now I'm back to fitdroid, cz my Camera360 always forced close when processing...
overall I like cm7, but I'll wait the finall version of CM7
Thanks a lot for all of your replies, i have installed vishwanathptl's CM 7.1, but 3G still not working, i have not another issues, camera works fine, mic and video playback ok, maybe i will do what Ping91 says, maybe with a fresh restart will work.
Btw, where can i download kp6 2.3.4 ROM? i cannot find it anywhere.
again thanks
Maleficus
Guys here's the solution for 3g issues with cm7.1...
-Open fitdroid Rom zip with winrar
-browse to /system/etc/apns_conf.xml
-drag the file to your desktop
-now move the file to the root of your SD card
-use root explorer and browse to /system/etc and rename the existing apns_conf.XML file to apns_conf.XML.back
-now move the copied file from the root of your SD card to /system/etc
And your done...3g works like a charm now
Press thanks if this helped.
Regards,
Spike
Sent from my GT-S5670 using xda premium
Well I am facing reboot issues a few times while installing apps above 10mb (mainly CM7 themes)...
Is there any1 else having this problem?
galaxy fit + CM7.1 (2.3.7)
i cant post links dx, but search for S5670LUBKP6.
No puedo postear link pero busca por S5670LUBKP6
neil.richard said:
Well I am facing reboot issues a few times while installing apps above 10mb (mainly CM7 themes)...
Is there any1 else having this problem?
galaxy fit + CM7.1 (2.3.7)
Click to expand...
Click to collapse
I guess you wont be able to install CM7 themes....
They are phone specific....am working on making CM7 themes for our fit...will take time as am still learning and upon that i have my exams next month....
Will update as soon as am done...
You can try UOT kitchen...where you can cook your own CM7 themes....
Regards,
Spike
spike1902 said:
I guess you wont be able to install CM7 themes....
They are phone specific....am working on making CM7 themes for our fit...will take time as am still learning and upon that i have my exams next month....
Will update as soon as am done...
You can try UOT kitchen...where you can cook your own CM7 themes....
Regards,
Spike
Click to expand...
Click to collapse
No..I am able to install and apply all CM7 mdpi and ldpi themes...and all of them work fine but sometimes while installation of the apk's my phone just reboots!
galaxy fit + CM7.1 (2.3.7)
Im not able to zoom in or out using my camera in cwm! Can anybody tell me how to do it???
(Ive already tried setting volume up and down button as zoom in or out button)
sent from my galaxy fit + CM7 using xda premium app
maleficus90 said:
Thanks a lot for all of your replies, i have installed vishwanathptl's CM 7.1, but 3G still not working, i have not another issues, camera works fine, mic and video playback ok, maybe i will do what Ping91 says, maybe with a fresh restart will work.
Btw, where can i download kp6 2.3.4 ROM? i cannot find it anywhere.
again thanks
Maleficus
Click to expand...
Click to collapse
I tried on Galaxy fit... I copied on SD and Install from recovery mode it says "Installation Aborted". Please help me. My phone is rooted.
Thanks everybody for your kind replies,
I will try spike1902's solution, and will post the results
PinG91: thanks a lot i will start to search for it right now
anshulsingh12995: Try Vignette, a great app, it supports zoom too
harshiv: try to wipe data/factory reset and wipe cache partition before install the CM7.1
Kind Regards,
Maleficus
Edit1: unfortunately spike1902's solution didn't worked =(
Edit 2: I think i cannot use 3G because in latin america we work in 900/2100 frecuencies, and i know in europe /Asia there are different frecuencies and CM 7.1 is based in a "non-latin america" ROM
I just had to go back to stock Gingerbread, 3G working just fine.
This exercise taught me several things, CM 7.1 is based on a European or Asian ROM, and 3G frequencies are different from Latin America, so while there is no CM 7.1 ROM based on Latin America, it is best to keep the stock ROM if you have to use 3g, if not, CM 7.1 is great .
regards,
Maleficus
Official Topic:
http://forum.xda-developers.com/showthread.php?t=1411567
Official Latest Download:
http://www.mediafire.com/?5203pvd74lei7yd
Official Latest Language Pack Download:
http://www.mediafire.com/?sjb9d4rscr28x9j
Official Latest Arabic Patch Download:
http://www.mediafire.com/?ely87747aze8u2w
Personal Porting Github Source:
https://github.com/Namaless/MIUI-I9003
How-to governers and schedulers:
http://forum.xda-developers.com/showthread.php?t=1242323
I can flash OC kernel?
No, you can't use any Samsung Kernel because more devices with MIUI not working. Use only supported kernel, at moment use Vurrut kernel with this reference:
Official topic: http://forum.xda-developers.com/showthread.php?t=1451218
Official download: http://www.multiupload.com/BT5GJ0IIN1
You can use Mobile Odin app or flash it with Odin from your PC.
What's not working?
At moment not working property:
Camera (front and rear).
Video playback not working with more codec. Few codec working property.
Wifi Hotspot not working.
Few themes not working property. For a moment not sicure to install any themes, please not report problem if you have modified theme.
Few people have blacklight problem, for a moment the developers not give and can't fix it. No report and report and report.. annoing... You can disable animations and the blacklight not showing.
In the latest version not able to create a Miui backup, fixed in next release or when developers have time to fix it. For a moment use CWM backup.
How to install:
You need to be on XXKPQ Firmware.
Go to recovery, full wipe (reset...dalvik...data...).
Install the MIUI and reboot.
Leave the phone for 5 min alone then reboot again (for the cache to build).
Turn off your phone anf flash vurrut kernel http://www.multiupload.com/BT5GJ0IIN1 Thanks Vurrut.
Enjoy the fastest rom for I9003.
Change log latest version of MIUI:
Updated to the latest Miui 2.1.13.
Recommended this week:
Additional time to send SMS
New full-screen mode, supports drop-down notification bar
Set clear contact contact support new data
Hang up the phone and animation optimization tips
System:
Repair in the alarm setting alarm music is not effective to modify the problem
Some cases, open repair time synchronization switch, but time does not sync problem
Phone:
Hang up the phone and animation optimization tips
Contact:
Set clear contact contact support new data
Import contacts in vCard optimized background
SMS:
Additional time to send SMS
Lock screen, status bar, notice board:
New full-screen mode, supports drop-down notification bar
New notification bar fast synchronous switch (automatic sync settings and display the current synchronization status, click the trigger synchronization, press and change synchronization settings)
Gallery:
Optimizing animated GIF images full-screen playback support
Supermarket Application:
Fix some cases, some software does not prompt update problem
Download Manager:
Show all downloads optimization tasks
Optimize the download time if you enter the state of the lock screen, lock WiFi to avoid sleep
Browser:
Repair in some cases access will be messy problem m.baidu.com
Phone wizard added on startup.
Keyboard changed (with vibration).
Drop down menu in Full screen menu, ICS option (You can now use Dropdown menu even when viewing Videos in Fullscreen mode).
Contacts importing optimized - Can be done in Background.
Latest Optimized Market Added.(i don't like it,i prefer the old one)
ICS animations.
Bluetooth fixed.
4 way reboot included (you can access recovery easily).
More languages added but need language pack.
Boot sound added (you can remove it easily if you don't like it).
Better Memory Management, 305Mb free.
Performance tweaks.
Sd tweaks.
Sd fix included.
Arc Bravia engine ported (better photo and video quality).
Vurrut kernel included.
Gtalk fixed.
I don't remember all maybe i forgot something.
Any news about new version?
Please not request fix or features, at moment only developer know what can fix. For new version is a change log (not official release):
Update to latest MIUI 2.1.20
SMS:
Some cases, repair will be repeated regularly send MMS problem
Repair time will be treated as ordinary MMS MMS problem
Repair time will become a draft text of the problem in 1970
Fixed video hardware encoding.
Connection to Camera hardware (camera panel not working at moment).
Update kernel with Vurrut Kernel V2 (OC kernel 1.3ghz).
Fix Backup bug, now working property.
Fix TelocationProvider bug.
Change launcher background and lockscreen background.
Fix Update System FC.
Add DSP Manager.
Add MIUI Stats.
Add FM Radio (can't lister sound at moment).
wifi
Hello Namaless.
excuse the trouble but I was wondering if you could help me.
I installed the MIUI v3, v4 and then I always have the problem of wifi. it find network, finds it and get the connection hangs address ip.Ho asked JP and he advised me to assign an ip static.i have also opened my network . done.now connects to the network and the icon appears,but not navigate . not responding when start loading the page. Do you know how to do? All other rom including your work great .
ciao Namaless.
scusa il disturbo ma mi chiedevo se potevi aiutarmi.
ho installato la miui v3 ,poi la v4 e ho sempre il problema del wifi. Mi ceca la rete,la trova e nella connessione si blocca a ottieni indirizzo ip.Ho chiesto a Jp e mi ha consigliato di assegnare un ip statico.ho anche aperto la mia rete.Fatto.ora si connette alla rete ed appare l'icona wifi ma non naviga.si blocca quando inizia a caricare la pag. Sai come fare?tutte le altre rom compreso la tua cm funzionano alla grande.
desmail said:
Hello Namaless.
excuse the trouble but I was wondering if you could help me.
I installed the MIUI v3, v4 and then I always have the problem of wifi. it find network, finds it and get the connection hangs address ip.Ho asked JP and he advised me to assign an ip static.i have also opened my network . done.now connects to the network and the icon appears,but not navigate . not responding when start loading the page. Do you know how to do? All other rom including your work great .
ciao Namaless.
scusa il disturbo ma mi chiedevo se potevi aiutarmi.
ho installato la miui v3 ,poi la v4 e ho sempre il problema del wifi. Mi ceca la rete,la trova e nella connessione si blocca a ottieni indirizzo ip.Ho chiesto a Jp e mi ha consigliato di assegnare un ip statico.ho anche aperto la mia rete.Fatto.ora si connette alla rete ed appare l'icona wifi ma non naviga.si blocca quando inizia a caricare la pag. Sai come fare?tutte le altre rom compreso la tua cm funzionano alla grande.
Click to expand...
Click to collapse
it seems the wifi still not working for you correct???
the static ip didn't work for you??
no bro .my wifi don't work.
i reflash many times kpe-kpq-v3/v4 but nothing.
I asked Nama because you are busy with v5 and I did not want spam in your thread.
i hope in v5 this issue is solved!!
desmail said:
no bro .my wifi don't work.
i reflash many times kpe-kpq-v3/v4 but nothing.
I asked Nama because you are busy with v5 and I did not want spam in your thread.
i hope in v5 this issue is solved!!
Click to expand...
Click to collapse
i will check my files again.
desmail said:
no bro .my wifi don't work.
i reflash many times kpe-kpq-v3/v4 but nothing.
I asked Nama because you are busy with v5 and I did not want spam in your thread.
i hope in v5 this issue is solved!!
Click to expand...
Click to collapse
What kernel and basename you have? Jp is busy man
Sent from MIUI V4 on GT-I9003
it's kpq -miui kernel(uck v.1)
i reinstall all with odin(latona-kpe-kpq-uckv7nonoc-miui)
desmail said:
it's kpq -miui kernel(uck v.1)
i reinstall all with odin(latona-kpe-kpq-uckv7nonoc-miui)
Click to expand...
Click to collapse
try this kernel http://forum.xda-developers.com/showthread.php?t=1451218
choose the one for CM/MIUI flash via odin and report if wifi ok.
desmail said:
it's kpq -miui kernel(uck v.1)
i reinstall all with odin(latona-kpe-kpq-uckv7nonoc-miui)
Click to expand...
Click to collapse
Choose the kernel in my first post, is the same kernel. For me this and original kernel wifi working property with dhcp
Original and vurrut kernel/ work wifi if install cm.
With miui not work
Inviato dal mio GT-I9003 usando Tapatalk
inviato dal mio i9003 con miui v4 senza wifi
desmail said:
Original and vurrut kernel/ work wifi if install cm.
With miui not work
Inviato dal mio GT-I9003 usando Tapatalk
inviato dal mio i9003 con miui v4 senza wifi
Click to expand...
Click to collapse
Try to flash with odin the modem from xxkb3 and report here.
desmail said:
Original and vurrut kernel/ work wifi if install cm.
With miui not work
Inviato dal mio GT-I9003 usando Tapatalk
inviato dal mio i9003 con miui v4 senza wifi
Click to expand...
Click to collapse
do you mean that now your wifi work with vurrut kernel for CM version???
No,work in cm7 with all kernel.in miui not work.
With xxb3 modem wifi not work.
I go to bed. Night.
Only few times and go at work.
Nama and jp .you are a great team :beer::beer:
inviato dal mio i9003 con miui v4 senza wifi
inviato dal mio i9003 con miui v4 senza wifi
desmail said:
Original and vurrut kernel/ work wifi if install cm.
With miui not work
Inviato dal mio GT-I9003 usando Tapatalk
inviato dal mio i9003 con miui v4 senza wifi
Click to expand...
Click to collapse
Use google dns
8.8.8.8
8.8.4.4
Try and report. Thanks
VurrutKer
vurrutKer is working well in cm7 by nameless no problem, I have not proven to MIUI , Sorry for my english but I´m spanish and use google translate.
Imperioso are here
Namaless said:
Use google dns
8.8.8.8
8.8.4.4
Try and report. Thanks
Click to expand...
Click to collapse
Done. Not work. I Will try another router and report. In the night, now i'm to work.
i try open network in my city and same problem. my router is ok. the problem is in my rom or in my installation step.
i reflash all.
always fight, never surrender
inviato dal mio i9003 con miui v4 senza wifi
hi ...can anyone solve the back light problem??
please~~~~
loukalok said:
hi ...can anyone solve the back light problem??
please~~~~
Click to expand...
Click to collapse
yes it is in many cases! me it works! only problem blacklight that makes clear the battery
nice man
Miui is so good
loukalok said:
hi ...can anyone solve the back light problem??
please~~~~
Click to expand...
Click to collapse
This topic not want requests, use this topic only for faq about latest miui. Tomorrow update the topic op.
Sent from MIUI V4 on GT-I9003
Hi guys so a few of you are starting to use cyanogen and cyangen based ports more often so I though I'd work on this for a bit. Currently its based off the P920 kernel branch. I hope to update to this now and then.
Main Features
- Updated To Linux Kernel 2.6.35.14 (Says .7, Just To Fool Wifi & Bluetooth)
- Over Clocked Upto 1.4Ghz From 100Mhz In 14 Steps
- Lowered CPU Voltages
- GPU Frequency Set @ 384Mhz
- Decreased CPU Latency
- RAM Over Clock @ 480Mhz
- Kernel Hz 512
- SIO v2 IO Scheduler As Default
- Other Small Tweaks & Under Volting
Change Log 01/11/2012
- Initial Release
Kernel Source
https://github.com/samno1607/CyanPlus
samno said:
Hi guys heres a cyanogen kernel some of you have asked for, it does not contain all the features of the original titan kernel as i dont have enough time a the moment and may not do in the future. This was compiled using the latest cyanogen source so includes ghost call fixes and other stuff. Ive only tested this briefly as i do not use cyanogen so anyway on to the details.
Main Features
-Overclock To 1.2 As Standard (Probably Upto 1.4 With Modules)
-Overclock Module Boot Support
-Overclock Modules Supprt
-Gpu Overclock To 384Mhz
-Cif, Tun & Slow Work Integrated.
Everything else is untouched in the kernel.
Edit: Just Tested On BangMod Works Fine
Click to expand...
Click to collapse
Thanks mate will use this when i use cm7..
Thanks i will try
Sent from my Optimus 3D
Hello
How to Oc up to 1.4, Terminal not working for me?
Good Job BTW
Cheers!
goofyog said:
Hello
How to Oc up to 1.4, Terminal not working for me?
Good Job BTW
Cheers!
Click to expand...
Click to collapse
Here you can find the app you need for it : http://forum.xda-developers.com/showthread.php?t=1592110
DL it and, woala ur overclocked, but 1.4 working only on few devices. On mine its not working, just lagging.
But 1.32 seems stabile
thanx!
you could do it for the P925?
?????
Hello samno.
Please, could be clearer
- It's Titan or cianogen
- Works with Promethius (21E)-P920
- Remove ghost calls.
Thanks for your work, very good. My real problem (I think of many), are called ghosts.
Promethius (21E), working perfectly.
Thank you, thank you very much
Español
Hola samno.
por favor, podria ser mas claro
- Es Titan o cianogen
- funciona con Promethius (21E) -P920
- elimina las llamadas fantasmas.
Gracias por su trabajo, muy bueno. Mi verdadero problema (creo que el de muchos), son las llamadas fantasmas.
Promethius (21E), funcionando perfectamente.
Gracias, muchas gracias
EduardoGM said:
Hello samno.
Please, could be clearer
- It's Titan or cianogen
- Works with Promethius (21E)-P920
- Remove ghost calls.
Thanks for your work, very good. My real problem (I think of many), are called ghosts.
Promethius (21E), working perfectly.
Thank you, thank you very much
Click to expand...
Click to collapse
Please, read the thread.
-It's TitanFusion for CyanogenMod.
-No.
-Maybe.
@infernum i think it should work on the p925 cyanogen dont know. Maybe you could try it and let me know but make sure you back up your original boot.img in cwm.
@eduardogm 1. its cyanogen 2. No dosnt work with promethius 3. if you have gc with normal cyanogen then you will with this.
@pandaball +1 thanks for helping
samno said:
@infernum i think it should work on the p925 cyanogen dont know. Maybe you could try it and let me know but make sure you back up your original boot.img in cwm.
Click to expand...
Click to collapse
It does not work because the baseband is different. the mobile starts but does not catch network operator
Okay
Okay then if I get some time this weekend ill have look at it.
EDIT: Do you know where i can get p925 cyanogen kernel source is it a branch on the lge cosmo kernel.
EDIT 2: Have you tried a different baseband like O3D one, would doing this effect 4g stuff?
samno said:
Okay then if I get some time this weekend ill have look at it.
EDIT: Do you know where i can get p925 cyanogen kernel source is it a branch on the lge cosmo kernel.
EDIT 2: Have you tried a different baseband like O3D one, would doing this effect 4g stuff?
Click to expand...
Click to collapse
I have a optimus 3D, but with the problem of "ghost calls", we use the CyanogenMod ROM for P925 and the baseband of froyo (O3D). No calls ghosts, we CyanogenMod and have a good phone, not 3D.
The kernel can take it from here?
http://get.cm/?device=p925
Are you going to keep working on this kernel samno?
Sent from my LG-P925 using xda app-developers app
May do, if I get time after finishing a few other bits.
Ok so I decided not to do the other bits and i've started back on this. Could someone test the Cyan+ Beta for me please. It stock performance wise but i've changed some other things.
Yes I could try it
Sent from my LG-P920 using Tapatalk
---------- Post added at 12:36 AM ---------- Previous post was at 12:12 AM ----------
Doesn't work, it shows the lg for a short time and then reboots (I'm on miui by acura)
Sent from my LG-P920 using Tapatalk
Does titan fusion work on miui though because Cyan+ is using the same ramdisk.
berni987654321 said:
Yes I could try it
Sent from my LG-P920 using Tapatalk
---------- Post added at 12:36 AM ---------- Previous post was at 12:12 AM ----------
Doesn't work, it shows the lg for a short time and then reboots (I'm on miui by acura)
Sent from my LG-P920 using Tapatalk
Click to expand...
Click to collapse
Same here, self reboot after showing the lg logo... with CM7 nightly
Latest Cyanogenmod nightly for o3d LG logo boot loop with beta kernel.
Sent from my LG-P925 using xda premium
New beta, let's try again.
[ROM]JAPONINJA_ICS <<_>> FINAL
I sold my P920, so this project is abandoned...
Hi there,
I cooked a rom based on [ROM][ICS][P920] First ICS 4.0.4 Full 3D ROM Ported From SU760.
DOWNLOAD:
Japoninja_ICS_O3D FINAL
Features:
Removed all the korean stuff and the bloatware.
Fully deodexed (apps and framework)
Removed 3d games
OverClock at 1.2 GHz.
Init.d enabled
Rooted
SMS 160 chars.
XDA APP installed.
Titanium Backup installed.
Removed all korean trash.
The apps from here already included
Enabled JIT (Pimp My ROM)
Installed Sony Walkman suite : Music Player & Visualizer, Clearbass soundfx and Image Gallery & Editor (Pimp My ROM)
camera from here
Face Unlock
Awesome Beats (works with Music Player (walkman) from (Pimp My ROM)
You can choose the awesome beats on system settings > sound options > Music Effects > Awesome Beats.
Boot animation from here
Some tweaks I copied from ThiaiZ roms.
Modules from here
zipalign and all the stuff from [SCRIPTS][TWEAKS][ICS]SlaidyBoost Beta1
Special THX for:
defcomg: deodexed the apps and made a lot of cool things I'm using on this rom.
NeObr: Beta tester
You can use morelocale2 to change the android to your language.
THIS ROM LOOKS LIKE A STOCK ROM, BUT FASTER.
If you like it please thx.
If you want to pay me a coffee
HOWTO INSTALL:
I couldn't create a zip install :'(
*If someone can create it please tell me.
THIS IS NOT A ZIP INSTALL :|:|:|: FOLLOW THE STEPS BELOW.
Step by step install:
1- Make sure you've the ICS running on your phone.
2- Root it
3- Install twrp
4- download the file on download link.
5- Do a backup of your cell to create the restore folder to TWRP
6- Unpack it into the inside the folder of your sdcard on the folder that looks like /sdcard/_ExternalSD/TWRP/BACKUPS/XXXXXXXXXX (change this x for your created folder and also save your backup) .
7- reboot into twrp.
8- select restore, and restore system, I also putted the boot and recovery images on file to make sure your cel will boot up
IMPORTANT:
The deodexed keyboard rises a fc, please install the attached one or the one on apps manager.
I made a video http://youtu.be/Bz8d_Yxfews
This video was recorded using airdroid so antutu benchmark is not accurate on the video.
Well I don't know how to explain, but for the first time I don't yell at my phone everytime I really need it, like to use gps or unlock the screen while listening some mp3.
My sdcard is 32 gb and it has almost 120000 inodes, so I removed it from antutu test.
PS: Now the apps manager also has wifikill and airdroid.
If you like it, please give me a feedback, so I can reopen this project or go for another.
japoninja_yoshi said:
Hi there,
I cooked a rom based on [ROM][ICS][P920] First ICS 4.0.4 Full 3D ROM Ported From SU760.
This rom already has overclock to 1.2 ghz, awesome bits from [MOD]Modified DSP Manager with BEATS audio. For CM9, MIUI & AOKP.(6.25.12)
Removed all the korean stuff and the bloatware.
Removed the golf game.
Use morelocale2 to change the language to your language.
I use the 21a br baseband and works nice.
I left my phone on stand by beside my bed with full battery, and on the morning it has 92% battery yet
zipalign and all the stuff from SCRIPTS][TWEAKS][ICS]SlaidyBoost Beta1
Credits for all this guys, I just cooked it on my phone and wanted to share.
To install, restore the files on zip with twrp.
I putted the boot, restore and system files on zip.
You must already be using the ics from the first link and the twrp from here.
Any questions are welcome, sorry for the poor english, I'm brazilian and the education system here is very poor.
Also has the camera from [DEV]JB4.2 Cam + ICS Camera
Thanks for all the guys who made this topics.
Download link: [UPLOADING TO 4shared]
Click to expand...
Click to collapse
Is this ROM odexed or deodexed?
EDIT: Just kidding. Now that this is Deodexed, I am totally installing this.
Reserved for me.
:good:
Good job, its nice to have more ICS ROM's. :good:
if anyone wants deodex sys Holla i will upload
defcomg said:
if anyone wants deodex sys Holla i will upload
Click to expand...
Click to collapse
Can you deodex the apps on system/app folder?
Thx
japoninja_yoshi said:
Can you deodex the apps on system/app folder?
Thx
Click to expand...
Click to collapse
app.rar - 210.17 MB
defcomg said:
app.rar - 210.17 MB
Click to expand...
Click to collapse
Off Topic: defcomg when are we going to see a ROM from you? Clearly you have the skills why not? if I may.
kidkoala_uk said:
Off Topic: defcomg when are we going to see a ROM from you? Clearly you have the skills why not? if I may.
Click to expand...
Click to collapse
lol imma XDA Ninja now wait till source Drops and CM10 comes out im sure the kernel can be modded to run on GB this ICS bootloader turns me off messing around with the rom i have my On this http://www.xda-developers.com/android/meizu-mxs-flyme-os-ported-to-the-att-galaxy-s-ii/ and MIUI V4 + Paranoid till theN i will help out where i can
Looking forward to a ROM from you. :good:
Hi there,
No news, I believe nobody even tested it, so please, some moderator please close this topic.
japoninja_yoshi said:
Hi there,
No news, I believe nobody even tested it, so please, some moderator please close this topic.
Click to expand...
Click to collapse
I did, is it supposed to just look exactly the same as what I am currently running? I installed as per your instructions and everything was the same except the additional applications. I also note that it wouldn't read my sd card after flashing as well. I as well as others appreciate your work mate so keep going, maybe this thread should be moved to development. Maybe you could theme the rom as well and put up some pictures. It might have been because I was in the car but the beats mod didn't seem to be doing anything.
Sent from my LG-SU760 using xda app-developers app
I just saw, and I just download all the files necessary to make the installation process, make the entire process and give the feed necessary for us to improve and usufluir ICS on P920 :highfive:
saint_cow said:
I did, is it supposed to just look exactly the same as what I am currently running? I installed as per your instructions and everything was the same except the additional applications. I also note that it wouldn't read my sd card after flashing as well. I as well as others appreciate your work mate so keep going, maybe this thread should be moved to development. Maybe you could theme the rom as well and put up some pictures. It might have been because I was in the car but the beats mod didn't seem to be doing anything.
Sent from my LG-SU760 using xda app-developers app
Click to expand...
Click to collapse
Please test it for 2 days, This rom is very fast, I didn't put anything awesome, just use it because it's really fast.
The deodexed version gives me 6144 on antutu benchmark.
Create zip installer
parabéns pela sua customização, mas gostaria de saber se é possível você criar um zip installer, porque estou usando a versão 2.3.5.
kernelbr said:
parabéns pela sua customização, mas gostaria de saber se é possível você criar um zip installer, porque estou usando a versão 2.3.5.
Click to expand...
Click to collapse
Hi there,
This is not possible, because you must be already running the ics, cwm can't install all your system due the partitions sizes and specifications.
Best Regards,
Can this be moved to development?
I didn't created it there, because I couldn't create this topic there.
Thx.
I will try today this rom
Slow host download speed 22 min left :victory:
To much error . LG Keyboard has stopped to work...
Hello, i'm Daniel from Argentina and i have a problem.
Recently i installed bmm, i create a system 3 with 2gb for image, 300mb for cache and 500mb for system.
I flash 2 differents roms (pacman and dirty unicorn), and in both of them the phone gets every minute slower and after 5 mins it freezes for 10 seconds and autoshutdown.
Any idea? kernel, overheating, partitions size?
I'm on jb 4.1.1, kernel 3.0.8. Oh, also gapps after being flashed when i go back bmm freezes for seconds and then it close it with forze.
Thanks
Daniel
--------------------------------------
For the ones who know spanish, here it is...
Bueno, eso, hoy instale el boot menu manager, hize un system 3 con 2gb de image, 300mb de cache y 500mb de system.
Instale 2 roms diferentes, y en ambas a los 5 minutos(aprox) despues de usarlas se congelan 10 segs y tengo que sacar la bateria. Y tambien durante esos 5m va creciendo lo lento que va andando, es decir a los 4m es muy lenta y a los 5m pum, se traba.
Tienen idea de que puede ser? Yo creo que debe ser por algo del tamaño de la particion o sobrecalentamiento, pero el tamaño que puse lo lei de un user de xda y el sobrecalentamiento no se porque podria ser.
Puede que tenga que ver con el kernel?
Por cierto, el system 1, es decir el original funciona perfectamente. Y otro dato, luego de flashear los gapps, no vuelve atras y entonces el bmm lo cierra forzozamente
Estoy en jb 4.1.2
Muchas gracias
Slds
Daniel
Battery
Try to reflash stock ics first. And also, maybe your battery is dead? You need retest with good battery first.
turffe said:
Try to reflash stock ics first. And also, maybe your battery is dead? You need retest with good battery first.
Click to expand...
Click to collapse
no, my battery on my stock system works fine.
Do you think that after a factory reset to jb i will be able to run roms? Because both roms run on jb i don't know what is the problem.
As I said you need to test battery life on stock ics. If it still gives that, I tink it might be something with board. Or your phone simple can't run JB rom (because I think it runs more juice than ICS one).
Sent from my Atrix 2 using Tapatalk 4 Beta
turffe said:
As I said you need to test battery life on stock ics. If it still gives that, I tink it might be something with board. Or your phone simple can't run JB rom (because I think it runs more juice than ICS one).
Sent from my Atrix 2 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Thanks turffe,
Which app recommend me to test the battery?
Board? What do you mean about board?? (sorry for my poor english)
I will try options, but if anyone works i will have to reflash to ics
Did u try running other roms with different kernels? U could give that a shot.
Sent from my GT-S6102 using xda app-developers app
DanielGatti said:
Thanks turffe,
Which app recommend me to test the battery?
Board? What do you mean about board?? (sorry for my poor english)
I will try options, but if anyone works i will have to reflash to ics
Click to expand...
Click to collapse
Nova battery & battery analyser. Try these apps.
Sent from my Atrix 2 using Tapatalk 4 Beta
Well IMO your culprit is the 2GB data partition. BMM simply doesn't play well with 2GB partitions.
Make a smaller partition and then flash again.Don't make too small a partition though.Data partition should be atleast 500MB+
deveshmanish said:
Well IMO your culprit is the 2GB data partition. BMM simply doesn't play well with 2GB partitions.
Make a smaller partition and then flash again.Don't make too small a partition though.Data partition should be atleast 500MB+
Click to expand...
Click to collapse
Davesh thanks for the help, i did a 1000mb partition, installed paranoid 3.69, gapps and it auto shutdown before i finish the initial configuration (email and that). At least it didn't freeze
DanielGatti said:
Davesh thanks for the help, i did a 1000mb partition, installed paranoid 3.69, gapps and it auto shutdown before i finish the initial configuration (email and that). At least it didn't freeze
Click to expand...
Click to collapse
Do you have enough space free???
boot into your system 1 and see how much free space do you have in your data..
You did follow the proper steps in creating partitions and activating them right??
Prosiple THE
deveshmanish said:
Do you have enough space free???
boot into your system 1 and see how much free space do you have in your data..
You did follow the proper steps in creating partitions and activating them right??
Click to expand...
Click to collapse
Yes i have enough space (2.66gb)
Well, i think that i activate the 2nd system y the second reboot, but in the first time i enter to bmm menu. May that affect? Can i unistall bmm like any other app and do the steps again?
Thanks deveshmanish