I have a droid x2 that was rooted using oneclickroot through the pc, and it seemed to work out(superuser was there). Then I made the mistake of using droid 2 bootstrap instead of x2. I am at the circle "M" with no further progress. I have gone into recovery mode and factory reset multiple times with no luck of booting. I was going to flash(RSD 5.3.1 on vista32) VRZ_MB870_DTN-14.8_1FF_01.sbf, but the device is not showing. I have downloaded every driver I could find...still no luck. The driver that it asks for is SE DAYTONA FLASH DRIVER . The phone will try to install it every time its connected but doesn't succeed(MOTUSB doesn't go through). Any help is greatly appreciated.
Instal a custom ROM.
That should fix it then you can go stock.
Sent from my HTC Sensation Z710e using xda premium
How do I do that while in the bootloader menu(the screen with fastboot, rsd, recovery etc)?
EDIT: Ok, found how you do it. All I have is the stock sbf, would that work or do I need a different one? Im downloading affinity and eclipes right now just to test to see if it works.
EDIT: Tried both, non successful. Kept aborting the rom. Tried minimalx.zip and affinity.zip.
Did you say Droid 2? Try Cyanogen
Related
Hey guys. So I was flashing the new fission rom on my droid 2 today and after the backup was created and everything else was set, when the phone was rebooting, it just got stuck on the motorola boot logo. I have tried pulling the battery out and everything and all I get is the same boot logo. Is there anyway I can get into recovery mode?
any ideas on how to get the phone to boot propertly? :/
Are you holding X while powering on? This will get you into stock recovery. If you can get to that, try wiping data and cache and rebooting. If not, you might have to SBF:
SBF Guide:
http://forum.xda-developers.com/showthread.php?t=770224
SBF Download (download in guide doesn't work. You can find it here):
hxxp://www.mydroidworld.com/forums/droid-2-discussion/5323-tbh-mydroidworld-present-droid-2-2-3-20-triple-threat.html (replace xx with tt)
ALWAYS be sure to wipe data and cache when flashing a new ROM.
Hope this helps and you get your phone working.
If you get to the boot animation, pull the battery in the middle of it and when you reboot it will go into clockwork. If not, you will have to use an sbf
Sent from my DROID2 using XDA App
Also try holding the X button down on keyboard and hold down power also till motorola logo pops up.
Then hit the search key below X.
Wipe data and cache.
Good to go. Happens to me all the time when reflashing after a SBF.
alright. i'll give the sbf a try. and i did try holding down X. I got to that menu, wiped cache and data and i'm still stuck at that logo.
i got everyting to work but the final step. when i am about to flash the sbf on rsd lite, i locate it and everything, but the program won't let me click start in order to begin flashing. any ideas?
Did you click on your device in the list at the bottom?
-Gilgamesh- said:
Did you click on your device in the list at the bottom?
Click to expand...
Click to collapse
Also be sure you are using rsdlite 4.8 or 4.9
Sent from my ultra fast Liberated Droid 2
by click do you mean highlight? yeah i did. the start button is still faded out. i am also running rsd lite 4.9 :/
If you are on windows 7, you have to run rsd as admin. or your device won't show up.
Sent from my DROID2 using XDA Premium App
Did you make sure and wipe? I've had the same issue after not wiping. Try wipe and reinstall and see if it works
Sent from my DROID PRO using Tapatalk
Do you have your phone in recovery when you are trying to SBF? If so that may be your problem. You need to have it on the bootloader. You get to it by pressing up when you turn the phone on. It should go straight in, you shouldn't even see the moto symbol.
got the problem fixed! thank you all for your help. it was the windows 7 admin problem. Just did it off my media center xp desktop, worked like a charm. and yes i was in bootloader mode.
thank you again!
Congradulations! Glad to hear ya got it fixed.
Awesome! Glad your up and running.
Sent from my ultra fast Liberated Droid 2
I searched and did not find anything for the Inspire with this issue...
Not a n00b when it comes to flashing ROMs to various hardware, Tilt, Tilt 2, Nook Color and now my new HTC inspire..
I used the "One click" root process for the phone, and everything completed with no errors.
I am S-Off, and Eng S-Off as well.
I have ROM Manager installed (Latest from Market) as well as the latest CWM installed on the phone.
When I attempt to boot into Recovery, whether by using the Volume Down/Power and choosing recovery, or selecting it from ROM Manager, the phone restarts and sticks at the white HTC screen.
I have been unable to find a fix for this.
I know I am running the rooted stock ROM that the single click installs, as I am able to use it with no issues and install anything I want, etc..
Help?
Please post in the right section general. And there is a thread in there thats all about problem like this.
try about 10+ threads.
Sounds like you need to reflash your recovery. Turn your phone off completely, plug it in and seee if that brings up recovery.
mudknot2005 said:
try about 10+ threads.
Sounds like you need to reflash your recovery. Turn your phone off completely, plug it in and seee if that brings up recovery.
Click to expand...
Click to collapse
Haha yeah like 10+
Sent from my HTC Inspire 4G using XDA Premium App
Then my search did not bring up anything on the Inspire... Only on the Hero, et al...
I will go search, again.
Links to some of the common threads would be quite helpful in case search fails me again.
Did you try re flashing recovery? adb reboot recovery?
I believe that what you see happening on my phone is a soft brick.
This is NOT the case. The phone reboots into Android just fine, if I remove the battery and reseat it.
It ONLY hangs at the White HTC screen when trying to do Recovery... That is the only issue I am encountering.
mudknot2005 said:
Did you try re flashing recovery? adb reboot recovery?
Click to expand...
Click to collapse
Yes. Several times. Even so far as restoring the stock recovery to the device.
flash back to 2.5.xx instead of 3.0.6.x
mudknot2005 said:
flash back to 2.5.xx instead of 3.0.6.x
Click to expand...
Click to collapse
"An error occurred while flashing your recovery." when trying to flash 2.5.1.4
When I try to reflash the 3.0.2.5 it says it flashed just fine, but does so immediately. It DOES get SuperUser permission when it tries.
Got it to 3.0.0.5 and it boots recovery now.
Wonder if 3.0.2.5 has issues..
TY all for the help.
baaa he took 2.5.1.3 off of there..
You didn't really search did you? Search some more. Closed.
So i got a lg p925g its a Canadian version of the optimus 3d.
I go to the cwm menu factory data reset and clear all the caches then i install the new cwm from zip. It finished installing and i click shutdown.
The screen goes black and now it wont power back on!!!. The only way to get it to show a sign of life is to connect it to computer with no battery
and the ompa4430 device pops up for a second and then disappears.
Is there anyway to fix this, i have been trying to use omap4boot but it just stays at the"waiting for ompa44xx Device"
And never detects the phone.
Please If someone could help me it would be greatly appreciated!!!
Did you read the resurrection guide? It got me started when I had the same problem. Eventually I fixed the problem by fastbooting the flash recovery. But first you have to get the omap4 driver working.
Sent from my LG-SU760 using xda app-developers app
Hello,
I had a rooted verizon galaxy s3 (CM10) and I recently got stuck in a boot loop. So I connected to Odin and flashed both MD5 files and the root66.tar file, booted into recovery and tried to do a factory reset.
The problem is my power button won't work in recovery mode, so I can not select anything in the menu. The volume buttons work I just cant select anything.
I've searched all over for 2 days now and I can't find anything about my problem, am I screwed or is there something I haven't thought of yet?
Thanks preemptively for the help.
bump please help
Maybe possible to send commands to phone via adb?
Sent from my SCH-I535 using xda app-developers app
Which recovery you are using? Try twrp which recognises touch so no need of power button to select any option. I think class cwm also has touch based recovery.
Thanks doesn't hurt....
Thanks for the replies, I tried to run adb but just runs a lot of code then closes out. I tried to re-download and the same thing happened.
I was using the stock.vzw.root66.tar and BOOTLOADER_I535VRALF2.... I flashed them many times and nothing has changed it still just gets stuck on the 4G LTE screen. Where would I go about finding the recovery files you mentioned? I'm willing to try anything at this point.
Thanks again for the replies.
TotallyAGG said:
Thanks for the replies, I tried to run adb but just runs a lot of code then closes out. I tried to re-download and the same thing happened.
I was using the stock.vzw.root66.tar and BOOTLOADER_I535VRALF2.... I flashed them many times and nothing has changed it still just gets stuck on the 4G LTE screen. Where would I go about finding the recovery files you mentioned? I'm willing to try anything at this point.
Thanks again for the replies.
Click to expand...
Click to collapse
If it's stuck at the LTE logo, boot into recovery and factory reset.
Edit: to Odin flash CWM or TWRP, you can find both files in Open1your1eyes0's root thread in the dev section. Use either once you're rooted.
Sent from my SCH-I535 using xda app-developers app
If you just want this to be fixed quickly, you could always flash a Full-wipe rom that contains the bootloader, etc. Then after your back in the stock rom you could always re-unlock the bootloader, install custom recovery , re-root and flash whatever rom you wanted.
Surge1223
Thanks for the replies, I've searched the internet for a full-wipe rom and I cannot seem to find one, can you point me in the right direction?
Also sorry for the delayed response, I actually graduated college yesterday.
EDIT: Now I can't get the phone to boot into download mode or recovery mode, the Samsung logo comes up and the screen goes black. I'm pretty sure my phone is ****ed.
What was the last change you made? Also are you using the oem cable? Also, heres the link scroll down to section 5. http://forum.xda-developers.com/showthread.php?t=1762709
Surge1223
help me guys i almost tried for 2 days to solve the issue but i cannot find any thing.............
First i tried to install custom rom in my htc one s(fido)
i successfully rooted my device and then i install the new rom.
but unfortunately i deleted both my backup file and the custom rom which i installed there is nothing in the phone now it wiped every thing. i tried many things to get back my device but i cannot. almost my device is dead how to get back my device.... can anone help me pleas..........................
Wrong section, post in Q&A next time, your problem will get solved quicker.
Hold the power button for fifteen seconds-ish, until a line flashes on the screen. Then boot into HBOOT. As long as you have access to a computer, the rest is easy. Recovery, mount USB, copypasta ROM over and flash.
Sent from my One S using xda premium