Related
I've been a regular visitor on XDA. I am a semi-newbie at this point as I have flashed several ROM's successfully so that's my definition of a semi-newbi . I made some newbie mistakes this time around and soft bricked my Nfuse. It took a lot of reading but I managed to resolve the issue. I have appreciated the detailed posts on this site so I wanted to contribute and detail how I unbricked my Nfuse to help others.
I successfully loaded ICS CM9 for Infuse and spent the afternoon setting up all my apps. At the end of it all I decided it was time to back up the ROM via the ROM Manager app like I had done with GB. So I kicked off the backup and then it boot looped a few times and then it would only boot to CWM. I can't tell if doing this caused it or it not (anyone know if a ROM Manager backup should have worked here?)
I decided to start over so I began the Heimdall 'Stock_SGH_I997_UCLB3_Repartition-One-Click.jar' to get back to GB Rom. In the middle of the flash, it barfed and the phone disconnected from USB. Booted the phone and it was now in a state with the phone and computer icons with a yellow triangle ! in-between. I was now in a state where I could not boot to Download Mode.
More research and I found out about Adam Outler's Heimdall 'One Click Unbrick' and it brought it back to life. I was then able to get back into download mode, flash back to stock ('Stock_SGH_I997_UCLB3_Repartition-One-Click.jar' & 'SGH_I997 Entropy Test Kernel-One-Click.jar') from Entropy and got into GB. Then followed up with the CM9 ICS install using 'update-cm-9.0.0-RC0-infuse4g-05272012-UNOFFICIAL-signed.zip' and 'gapps-ics-20120429-signed.zip'.
So I am back to ICS (and love it!). I just wanted to express my thanks for all the work others have done to provide us with these tools. I had already ordered a JIG from eBAY and was going to have to wait for it to be delivered to see if it would get me into download mode. I thought I was in a hard brick at one point as I found conflicting posts about what a hard brick really is. I now know a hard brick is dead as a doornail so I was in a soft brick situation. I was also considering sending the phone to be JTAG repaired for $40 but I am happy it was a soft brick.
In any case, my phone is resurrected and I am happy and I hope this post helps others.
Tai'Shar
Tai'Shar said:
I've been a regular visitor on XDA. I am a semi-newbie at this point as I have flashed several ROM's successfully so that's my definition of a semi-newbi . I made some newbie mistakes this time around and soft bricked my Nfuse. It took a lot of reading but I managed to resolve the issue. I have appreciated the detailed posts on this site so I wanted to contribute and detail how I unbricked my Nfuse to help others.
I successfully loaded ICS CM9 for Infuse and spent the afternoon setting up all my apps. At the end of it all I decided it was time to back up the ROM via the ROM Manager app like I had done with GB. So I kicked off the backup and then it boot looped a few times and then it would only boot to CWM. I can't tell if doing this caused it or it not (anyone know if a ROM Manager backup should have worked here?)
I decided to start over so I began the Heimdall 'Stock_SGH_I997_UCLB3_Repartition-One-Click.jar' to get back to GB Rom. In the middle of the flash, it barfed and the phone disconnected from USB. Booted the phone and it was now in a state with the phone and computer icons with a yellow triangle ! in-between. I was now in a state where I could not boot to Download Mode.
More research and I found out about Adam Outler's Heimdall 'One Click Unbrick' and it brought it back to life. I was then able to get back into download mode, flash back to stock ('Stock_SGH_I997_UCLB3_Repartition-One-Click.jar' & 'SGH_I997 Entropy Test Kernel-One-Click.jar') from Entropy and got into GB. Then followed up with the CM9 ICS install using 'update-cm-9.0.0-RC0-infuse4g-05272012-UNOFFICIAL-signed.zip' and 'gapps-ics-20120429-signed.zip'.
So I am back to ICS (and love it!). I just wanted to express my thanks for all the work others have done to provide us with these tools. I had already ordered a JIG from eBAY and was going to have to wait for it to be delivered to see if it would get me into download mode. I thought I was in a hard brick at one point as I found conflicting posts about what a hard brick really is. I now know a hard brick is dead as a doornail so I was in a soft brick situation. I was also considering sending the phone to be JTAG repaired for $40 but I am happy it was a soft brick.
In any case, my phone is resurrected and I am happy and I hope this post helps others.
Tai'Shar
Click to expand...
Click to collapse
You're welcome, Tai.
from the op:
1. To cleanly install the latest ATT Infuse UCLB3 Gingerbread leak. No hassle One-Click. Then enjoy the lastest leak of Infuse GB.
2. To Restore your phone to factory state.
3. To Restore your phone from boot loops, Samsung Logo, Soft Brick - non-hardware related failures from bad flashes, borked partitions or mismatch voodoo partitions. (I suspect many users will use it for this purpose)
Scenario #1: Oh, gosh! I would love to have the latest GB leak from AT&T! How to I do that? What in the world is Odin? Ain't it some mythological Norse deity?
Heimdall 1 click - done!
Scenario #2: I think I did something to my phone. It's not working right. My wifi is dropping like a leaky faucet. My Market is not working. I hate my phone! I wish it was like factory.
Heimdall 1 click - done!
Scenario #3: Oh crap! I just #@#% in my pants! I bricked my phone. OMG!!! I'm stuck on SAMSUNG logo! I'm boot looping! I lost recovery! Help me!!!
Heimdall 1 click - done.
Rom Manager Backups and CM9 ICS
This might be a dumb question.... In my post above, does anyone know if using Rom Manager to perform a ROM Backup on ICS CM9 5/27/2012 build would or could cause the boot loop/soft brick? It probably is a coincidence but now I am not sure I want to try it again.
Tai'Shar Xda
Rom Manager Backup
Ah, never mind, just found it in the Nfuse CM9 ICS Rom thread. It does cause a boot loop: http://forum.xda-developers.com/showpost.php?p=26648460&postcount=1090
Tai'Shar Xda
I know you already found the answer, but do not use from manager. Do you backups from the nandroid in recovery only. From mgr will definitely give you issues.
Sent from my SGH-I997 using xda premium
ppalbicke said:
I know you already found the answer, but do not use from manager. Do you backups from the nandroid in recovery only. From mgr will definitely give you issues.
Sent from my SGH-I997 using xda premium
Click to expand...
Click to collapse
lol ah yes... brings back some unhappy memories...
Also...your yellow triangle with the ! Is still download mode...just a differnt mode-just an fyi that wasnt really that important....
Anyways glad you figured it out and posted to help.others who may not know how to use heimdal
Sent from my SAMSUNG-SGH-I997 using XDA
ppalbicke said:
I know you already found the answer, but do not use from manager. Do you backups from the nandroid in recovery only. From mgr will definitely give you issues.
Sent from my SGH-I997 using xda premium
Click to expand...
Click to collapse
Thanks for the input on this. I was about to research the best method for backup.
For backup of just the sdcard and all my photos and other personal files I've been using the Samba app. My PC has a mapped drive to the Samba share on the phone which is \sdcard. I use an inexpensive app on my PC called GoodSync and it checks every 10 min for the share and if it sees it after I enable Samba, it auto replicates all files to a folder on my PC. Not good for OS recovery but works well for personal data.
Tai'Shar Xda
mg2195 said:
Also...your yellow triangle with the ! Is still download mode...just a differnt mode-just an fyi that wasnt really that important....
Anyways glad you figured it out and posted to help.others who may not know how to use heimdal
Sent from my SAMSUNG-SGH-I997 using XDA
Click to expand...
Click to collapse
Thanks, I looked everywhere for the answer to that question.
Now that i recovered from a failed flash, I feel a bit more confident in replacing ROM's when I want to change the flavor.
I've read that these Samsung phones are really good for recovering from screw ups unlike other brands so i am glad I have the Infuse (but I have my eye on the new Galaxy III S).
I have rooted and unlocked phone but when it reboots into recovery its not listing all the options that will allow me to flash cm 7 nor cm9. Any help to get past this hurdle would be great thanks
Sent from my SAMSUNG-SGH-I997 using xda app-developers app
Although I might be using the wrong recovery file if so direction the right one would be appreciated
Sent from my SAMSUNG-SGH-I997 using xda app-developers app
What does it say the recovery version is ?
The first would be recovery 3e no Sig and then I've tried the advice from an earlier post for the galaxy is9000 I do believe. I just dropped 3e and going to try again with simply the is9000
Sent from my SAMSUNG-SGH-I997 using xda app-developers app
OK- you are not rooted- you can go to post 2 here and get root and red cwm recovery - thanks to qkster and Entropy
http://forum.xda-developers.com/showthread.php?t=1524081
i thought that i might have been rooted since i can run diff rom managers, i do have super user access, titanium back up and a few others must have root apps. But i will try and thank you very much sir
If Titanium Backup asked for Superuser permission and you granted and TB did not say you are not rooted then you are correct, you are rooted. My answer still holds to go to post 2 to get the proper recovery.
Edit: + 10 on not using ROM Manager. (from Andros11 below)
Do not use Rom Manager. You can either flash Entropy's DD kernel to get red cwm recovery or look in the iset thread for gtg's guide for installing cwm, and use method 1 which requires you have the 3e modded recovery.
Sent from my sweet & buttery Infuse
ok ok for sure thank you very much i was wondering what i was doing wrong so i will take it all back to stock and start from scratch on this one here. But one more question i feel like there is an instability in the os so this what really prompted me to root this phone. The usb works at times, it turns on when it wants, it turns off and locks freezes completely when it wants, to turn it on i have to remove the battery put it back in then when the battery shows i have to plug in to the usb port for the computer to get it to start. Overall i do not know what my friend did to his phone but it's a night mare. have you heard of this occuring with anybody else sir?
But i have managed to unlock and get free wifi hotspot out of it smh
I like your approach, however it sounds like the problems may be related more to:
a : power button may be sticking
b: may have issues with usb connection, either on phone or on computer or both.
Before you go any further, make a backup of the current rom on the phone if possible.
Understood, i will flash the new CWM, back up then progress forward on that note. As for the usb i've used several and the one i am using right now is not registering where it did yesterday, and it is like a females emotions very fickle in nature. I will play with it a lil bit more to see if i can download via usb if not i'll use the sd-ms card to pick up the files and move forward at that point. Thank you very much sir you have been a big !!
Ok so I have a rooted infuse 4G and am a complete noob when it comes to flashin roms and mods... I am still on the froyo 2.2.1and hate it lol. Which brings me to my first query, I know its possible to upgrade my android version to the GB and JB with multiple methods but I'm extremely scared that I'm going to brick my phone. It was some forums on here that helped me decide to root my phone so now I'm hoping that you guys can help me take the next step. So whats the safest, easiest way to upgrade my os.. Odin didnt work and I no longer have a computer, so heimdall is out as well. Oh not sure if this is important but I'm not registered on any network nor have I unlocked my phone's sim. Well that's a start. I really hate froyo 2.2.1 so please if anyone can help I definitely could use it.
treyserits said:
Ok so I have a rooted infuse 4G and am a complete noob when it comes to flashin roms and mods... I am still on the froyo 2.2.1and hate it lol. Which brings me to my first query, I know its possible to upgrade my android version to the GB and JB with multiple methods but I'm extremely scared that I'm going to brick my phone. It was some forums on here that helped me decide to root my phone so now I'm hoping that you guys can help me take the next step. So whats the safest, easiest way to upgrade my os.. Odin didnt work and I no longer have a computer, so heimdall is out as well. Oh not sure if this is important but I'm not registered on any network nor have I unlocked my phone's sim. Well that's a start. I really hate froyo 2.2.1 so please if anyone can help I definitely could use it.
Click to expand...
Click to collapse
From Froyo 2.2.1, there is an official build GB 2.3.6 UCLB3 out for the Infuse.
You will need a computer though. Without a computer to restore your phone to stock from soft bricking, you should not be flashing anything. It may be possible for you to bring your phone to an AT&T store and have them update you if you don't have a PC. You will need a computer to root the GB UCLB3.
Where to start? Read the Q/A as much as you can. Then move into the Development section.
http://forum.xda-developers.com/showthread.php?t=1437548 - read it all
thanks
qkster said:
From Froyo 2.2.1, there is an official build GB 2.3.6 UCLB3 out for the Infuse.
You will need a computer though. Without a computer to restore your phone to stock from soft bricking, you should not be flashing anything. It may be possible for you to bring your phone to an AT&T store and have them update you if you don't have a PC. You will need a computer to root the GB UCLB3.
Where to start? Read the Q/A as much as you can. Then move into the Development section.
http://forum.xda-developers.com/showthread.php?t=1437548 - read it all
Click to expand...
Click to collapse
Thanks qkster.. I really appreciate your help. I follow alot of your threads and am so hapoy thst there are infuse users that actually are willing to take the device to the next lvl. Now for another question.
Will it be easier to flash the jellybean 4.1.1 from the froyo or the gb? Or would it be possible to just flash a higher kernel? I'm not syre if that would help me or not, I really want to speed up my infuse and stop it from rebooting so much.
treyserits said:
Thanks qkster.. I really appreciate your help. I follow alot of your threads and am so hapoy thst there are infuse users that actually are willing to take the device to the next lvl. Now for another question.
Will it be easier to flash the jellybean 4.1.1 from the froyo or the gb? Or would it be possible to just flash a higher kernel? I'm not syre if that would help me or not, I really want to speed up my infuse and stop it from rebooting so much.
Click to expand...
Click to collapse
You cannot flash JB from Froyo and need to go to Gingerbread, then ICS then JB.
http://forum.xda-developers.com/showthread.php?t=1878458
Kies?
psal217050 said:
You cannot flash JB from Froyo and need to go to Gingerbread, then ICS then JB.
http://forum.xda-developers.com/showthread.php?t=1878458
Click to expand...
Click to collapse
Would it be best to use kies to update to GB? I'm a little concerned as to what would happen to my Infuse all around.. What will need backed up?
I have titanium backup but if the app gets wiped wont i lose all my back-ups? For some reason it wont sync to my dropbox app force closes every time I try. Sorry about all the questions I'm just short on the amount of time I am able to browse threads at the moment but I do have use of a computer for awhile so that kinda helps.
I personally prefer using odin or heimdall. Don't quite trust kies and it often gives issues.
all mayor changes will occur on system partitions. Your internal sd will remain untouched, and there you will titanium backups. Just reinstall TB app later and restore apps, not data.
Sent from my SGH-I997 using xda app-developers app
Ok well here goes nothing.
andros11 said:
I personally prefer using odin or heimdall. Don't quite trust kies and it often gives issues.
all mayor changes will occur on system partitions. Your internal sd will remain untouched, and there you will titanium backups. Just reinstall TB app later and restore apps, not data.
Sent from my SGH-I997 using xda app-developers app
Click to expand...
Click to collapse
Well I'm going to install and give it a try with Heimdall. I'll let you know how it goes. Thanks everyone for all your help. I'm sure I'll have more questions before long. XD
andros11 said:
I personally prefer using odin or heimdall. Don't quite trust kies and it often gives issues.
all mayor changes will occur on system partitions. Your internal sd will remain untouched, and there you will titanium backups. Just reinstall TB app later and restore apps, not data.
Sent from my SGH-I997 using xda app-developers app
Click to expand...
Click to collapse
Will this even work if i'm not registered to a network with the phone still locked? And I see that it will also unroot my phone which isnt a problem I'm just curious whether or not I can still root with super one click or if i need a different root tool?
treyserits said:
Will this even work if i'm not registered to a network with the phone still locked? And I see that it will also unroot my phone which isnt a problem I'm just curious whether or not I can still root with super one click or if i need a different root tool?
Click to expand...
Click to collapse
It doesn't matter if your phone is unregistered and locked. You cannot use SuperOneClick on Gingerbread. What you should do is (this is the Heimdall version):
Flash this rooted version of stock GB:
http://forum.xda-developers.com/showpost.php?p=25526643&postcount=2
You do that and you already have root.
If you want to then graduate on to Jelly Bean you must:
Flash ICS (follow directions carefully!):
http://forum.xda-developers.com/showpost.php?p=24901014&postcount=1
Once you've done that, flash any of the JB ROMs you like, but make sure to read the directions carefully. I strongly recommend that you consult the Super Everything Thread for links to the ROMs and tweaks you need, particularly if you are interested in unlocking your phone.
http://forum.xda-developers.com/showthread.php?t=1610374
I'm feeling kinda stupid..
Can somebody give me the right link for downloading Heimdall One-click w/root? For some reason I'm not able to get any to work on this computer.. I downloaded the ink provided labeled UCLB3 -DEBLOATED-ODEX - ROOTED - BUSYBOX- STOCK KERNEL on
http://forum.xda-developers.com/showpost.php?p=25526643&postcount=2
but am unsure if that actually is the one containing Heimdall or just the rom i'm flashing or both.. I'm extremely sorry about my noobishness of just posting all these already answered questions. I've gone and confused myself and have like ten tabs with different threads open please don't hate me. I have a bad habit of asking questions..
Oh and what apps do i need on my phone in order to flash? And I mean absolutely need. I've also noticed that most threads say to format my mounted sd card But i really dont want to do that if i dont need to.
It should all be bundled together. Heimdall is a java based interface so it should just open up. Sorry, it's been a long time and I'm an Odin person!
You don't need any apps on your phone. When you flash, everything on the small partition will be wiped (apps, app data, etc). Flashing will not usually wipe your pictures, videos etc. but it's always a good idea to back up. For now, don't worry about formatting anything. When you get to ICS, you'll need to format as it says in the instructions. Otherwise, if it works, don't fix it!
When you flash ICS and JB, all you need to do is to put the zip files on to your internal SD card (not the one you can take out). You can then flash from CWM (which will already be on your phone - don't download Rom Manager).
Once again thank you all. I'm running GB and loving it. My fiance is shocked at how much help I needed though usually I'm the person everyone comes to with their tech issues LOL. But I absolutely did not want to mess my infuse up. I thought I did but the issue was such a noob mistake that I had to smack myself in the face at my stupidity. Forgot to unzip the cwm ect folder I downloaded. XD not sure I'm ready to try ICS or JB yet though.
Sent from my SAMSUNG-SGH-I997 using xda app-developers app
The odd thing is you could have updated to GB through AT&T and used mini kies. But at least you are now rooted and able to go to ICS and JB.
Read the instructions on the next step before moving on.
Sent from my SGH-I997 using xda premium
Kinda wish I would have done it that way... I wanted to get some practice flashing roms tho. And now my phone is bootlooping, computer says the device is incompatible I can only get into the samsung recovery even tho the rom i flashed had cwm packaged in. I tried to change my boot animation following the steps provided in my boot animation thread then again with the steps in tsqers rom thread I apologise if thats mispelled. I tried updating from sd but get a sign error Can get into download mode but same issue with it being incompatible usb device. I tried holding down the power button for 1 minute and then rebooting no luck there. I tried wiping data/fact. reset,... nothing. I tried wipe cache partition,...still looping.
The loop samsung screen two seconds, black screen 1 1/2 seconds,... over and over and over...
My battery is full. Any advice???
treyserits said:
Kinda wish I would have done it that way... I wanted to get some practice flashing roms tho. And now my phone is bootlooping, computer says the device is incompatible I can only get into the samsung recovery even tho the rom i flashed had cwm packaged in. I tried to change my boot animation following the steps provided in my boot animation thread then again with the steps in tsqers rom thread I apologise if thats mispelled. I tried updating from sd but get a sign error Can get into download mode but same issue with it being incompatible usb device. I tried holding down the power button for 1 minute and then rebooting no luck there. I tried wiping data/fact. reset,... nothing. I tried wipe cache partition,...still looping.
The loop samsung screen two seconds, black screen 1 1/2 seconds,... over and over and over...
My battery is full. Any advice???
Click to expand...
Click to collapse
Which ROM did you flash and which CWM recovery can you see (which version)?
I used the http://forum.xda-developers.com/show...43&postcount=2 thread to get the rooted rom UCLB3 -DEBLOATED-ODEX - ROOTED - BUSYBOX- STOCK KERNEL.
Saved I think.
So I finally Got it to connect to my comp and re-flashed the rom can i get a link to an ICS heimdall one click package to flash before restoring anything and this happening again?
You should be able to find it on the ISET page.
http://forum.xda-developers.com/showthread.php?p=32876425
Sent from my SGH-I997 using xda premium
Just rooted my new SGS3 using New Root Method Released for Verizon’s Galaxy S3, No Odin Required. i did the data & kelvic wipe then install Clean Rom 5.0. All progressed without a hitch. Even backed up with CWM prior to flash.
I rebooted into the new rom and got this: System software not authorized by Verizon Wireless... rebooted several time with same result.
What can I do now? Thanks for your help.
Just a wild guess, but me thinks your bootloader is still locked! But I'm not sure that will even apply because I rooted my device before unlocking the bootloader. But I rooted my device via ODIN first.
You can try EZ-Unlock via the Market. The GUI is still very buggy and will show the status as unknown but the internal workings of the app works good.
You got nothin to loose in trying. Go back to stock and give it another whirl after you've unlocked the bootloader.
Of that fails then I would suggest using the tried and true method..ODIN.
G'luck!
yup your bootloader is still locked
check the downloads thread and use version 1.2.
That means your boatloader is locked. You now must Odin back to stock and start over. Droid style has a guide stickied in the development thread. Follow section 6 of it.
Next time use ez unlock version 1.2 to unlock you boatloader.
Sent from my SGS3 running Eclipse 2.1
downloads list
http://forum.xda-developers.com/showthread.php?t=1850506
tekrhino said:
Just a wild guess, but me thinks your bootloader is still locked! But I'm not sure that will even apply because I rooted my device before unlocking the bootloader. But I rooted my device via ODIN first.
You can try EZ-Unlock via the Market. The GUI is still very buggy and will show the status as unknown but the internal workings of the app works good.
You got nothin to loose in trying. Go back to stock and give it another whirl after you've unlocked the bootloader.
Of that fails then I would suggest using the tried and true method..ODIN.
G'luck!
Click to expand...
Click to collapse
Thanks. I can't get past the warning dialogue screen. Pulled the battery, no good. PC can't see the phone with USB.
Prophotog said:
Thanks. I can't get past the warning dialogue screen. Pulled the battery, no good. PC can't see the phone with USB.
Click to expand...
Click to collapse
Yikes, ok
You have to get into DOWNLOAD MODE.. Power+ Volume Down+ Home key at the same time after a fresh battery pull.
Do a search on the Development forum to set up Odin on your PC.
YOU Must FOLLOW directions EXACTLY our you will have very expensive BRICK!
This forum could help:
http://forum.xda-developers.com/showthread.php?t=1762709
Or even better, this one:
http://forum.xda-developers.com/showthread.php?t=1840030
tekrhino said:
Yikes, ok
You have to get into DOWNLOAD MODE.. Power+ Volume Down+ Home key at the same time after a fresh battery pull.
Do a search on the Development forum to set up Odin on your PC.
YOU Must FOLLOW directions EXACTLY our you will have very expensive BRICK!
This forum could help:
http://forum.xda-developers.com/showthread.php?t=1762709
Or even better, this one:
http://forum.xda-developers.com/showthread.php?t=1840030
Click to expand...
Click to collapse
Thanks to everyone!! Looks to be a long night. :>)
tekrhino said:
Yikes, ok
You have to get into DOWNLOAD MODE.. Power+ Volume Down+ Home key at the same time after a fresh battery pull.
Do a search on the Development forum to set up Odin on your PC.
YOU Must FOLLOW directions EXACTLY our you will have very expensive BRICK!
This forum could help:
http://forum.xda-developers.com/showthread.php?t=1762709
Or even better, this one:
http://forum.xda-developers.com/showthread.php?t=1840030
Click to expand...
Click to collapse
I lol'ed at your post. A little dramatic, don't you think? He's not even close to bricked. Just Odin from download mode back to stock, and redo the steps with bootloader unlock.
Here is a gift (working ez-unlock v1.2)
http://dl.dropbox.com/u/42057363/com.mmmeff.ez.unlock_3.apk
@Techsavvy
Yeah, perhaps a tad overdone on the theatricals.
Cut me some slack, I'm taking acting classes..lol
And... I know... I know..don't quit my day job!
Still having issues. I "think" I am in the download mode. Screen says Downloading.... It has Odin in red in top left corner. Device connects with Odin. BUT I am not getting a PASS message when flashing VRALEC bootchain. Last text line in Odin is: <OSM> Leave CS...
I have tried several attempts.
Suggestions?
Prophotog said:
Still having issues. I "think" I am in the download mode. Screen says Downloading.... It has Odin in red in top left corner. Device connects with Odin. BUT I am not getting a PASS message when flashing VRALEC bootchain. Last text line in Odin is: <OSM> Leave CS...
I have tried several attempts.
Suggestions?
Click to expand...
Click to collapse
No need to do the boot chains. Just follow section 5 of this guide and I recommend root 66 for the ROM you flash
http://forum.xda-developers.com/showthread.php?p=28530394
Sent from my SGS3 running Eclipse 2.1
tekrhino said:
@Techsavvy
Yeah, perhaps a tad overdone on the theatricals.
Cut me some slack, I'm taking acting classes..lol
And... I know... I know..don't quit my day job!
Click to expand...
Click to collapse
I appreciate the theatricals...however, I am having issues with Odin. Can't get the Pass message. I assume the "Downloading..." text means I'm in the download mode. Tried several attempts. I AM glad I'm not close to bricked too! Can't afford $600 or a divorce. Might have to sell a camera instead.
Prophotog said:
Just rooted my new SGS3 using New Root Method Released for Verizon’s Galaxy S3, No Odin Required. i did the data & kelvic wipe then install Clean Rom 5.0. All progressed without a hitch. Even backed up with CWM prior to flash.
I rebooted into the new rom and got this: System software not authorized by Verizon Wireless... rebooted several time with same result.
What can I do now? Thanks for your help.
Click to expand...
Click to collapse
And just for future reference, it's Dalvik, not Kelvic
Sent from my SCH-I535 using xda app-developers app
Prophotog said:
I appreciate the theatricals...however, I am having issues with Odin. Can't get the Pass message. I assume the "Downloading..." text means I'm in the download mode. Tried several attempts. I AM glad I'm not close to bricked too! Can't afford $600 or a divorce. Might have to sell a camera instead.
Click to expand...
Click to collapse
Just a heads up. You can get a real brick with Odin and easy. Follow the guide I linked earlier to a t and you'll be fine
Sent from my SGS3 running Eclipse 2.1
kintwofan said:
Just a heads up. You can get a real brick with Odin and easy. Follow the guide I linked earlier to a t and you'll be fine
Sent from my SGS3 running Eclipse 2.1
Click to expand...
Click to collapse
You are a scholar and a gentleman!! THANK YOU very much. You can have a portrait session on me any time. Name the time and place.
Prophotog said:
You are a scholar and a gentleman!! THANK YOU very much. You can have a portrait session on me any time. Name the time and place.
Click to expand...
Click to collapse
Cool, I take it you're up and running again. Just make sure you use ez unlock 1.2 next time. And the positive is you're an Odin pro now!
Sent from my SGS3 running Eclipse 2.1
Hi, I have a Verizon S3 flashed to Boost Mobile. I tried to gain root by flashing a stock rooted Rom and messed up the flash. I had to take it back to be flashed again  Now I'm more cautious before hand. I should have backed it up before attempting it, I know I know lol can anyone shed some light on how to update a flashed phone as well as how to root it. I could really use the help 
Also after I messed up the boost flash I paniced and flashed a sprint kernel hoping this would fix the problem. Since then anything that I've tried to view including taking camera shots and web browsing if done in landscape mode will be upside down, any remedy for this problem? I know now... root first, flash later. 
Sent from my SPH-L710 using XDA HD
Alex0826 said:
Hi, I have a Verizon S3 flashed to Boost Mobile. I tried to gain root by flashing a stock rooted Rom and messed up the flash. I had to take it back to be flashed again  Now I'm more cautious before hand. I should have backed it up before attempting it, I know I know lol can anyone shed some light on how to update a flashed phone as well as how to root it. I could really use the help 
Also after I messed up the boost flash I paniced and flashed a sprint kernel hoping this would fix the problem. Since then anything that I've tried to view including taking camera shots and web browsing if done in landscape mode will be upside down, any remedy for this problem? I know now... root first, flash later. 
Sent from my SPH-L710 using XDA HD
Click to expand...
Click to collapse
Sprint kernel is causing the inversion. Flash a vzw kernel. Read first flash later.
Sent from my SCH-I535 using xda app-developers app
Who ever did your flash might not done it right cause ya not supposed to lose a flash like that unless he didn't do things right. I can factory reset mine and I wont loose flash
Sent from my SPH-L900 using Tapatalk 2
Is there such thing as a guide like this one but that is up to date and with working links? I want to flash a new ROM onto my phone, but the guides I've found here and elsewhere have broken links, or use language that I don't understand, or skip vital steps. I've been working on this for four hours straight and I haven't gotten a single guide to work, or get stuck, or something else that's really dumb. For someone who has worked on computers for the last 17 years this is extremely frustrating. I'm very new to the android modding scene and apparently it's not just a community, but an entirely different culture and I'm feeling a bit shocked and confused. I have like 30 tabs open with guides, info, different ROMs, different ways to do it, etc and the more I learn the less I understand how to do this :/ I just want to get my phone working with a ROM that's very similar to stock Sense but without the crappy bloatware and memory issues. Miktouch is the one I thought I wanted, but apparently hasn't been updated in almost a year, and bulletproof/doubleshot is confusing. I can't even figure out how to root and get S-Of... Gah!
Please help.
This guide is confusing and skips steps or lacks real explanations.
Thank you.
First thing you want to do is root your phone, this is done by unlocking you bootloader through the HTC dev website. There is a tutorial that is stickyed in the developer section called something like root from any bootloader. I suggest to read that a bit.
Once you followed those steps and unlocked your bootloader you can decide if you want to remove all security flags (highly recommend this, but some find it difficult) in the same guide it explains what radio s-off is and links you to the jbear site to do the wire trick (needs Linux) (or find weekendstoshort for a way to do it in windows)
Feel free to ask more questions but all answers should be found in these xda threads and jbear site, no need to Google anything for this
Sent from my Nexus 4 using xda premium
I hope so...I'll give it another go tomorrow. I'm still quite frustrated at it. I wish I knew someone who had done it and could show me in person.
GiftigDegen said:
I hope so...I'll give it another go tomorrow. I'm still quite frustrated at it. I wish I knew someone who had done it and could show me in person.
Click to expand...
Click to collapse
MikTouch is optimized stock... So updating it farther would take it a direction we wasn't going with it.
Bulletproof is even older. We don't have much here... But what's here is solid
Sent from my Nexus 4 using Tapatalk 4 Beta
First timer here as well (although long time computer user/programming familiar so I might have a better understanding of some things than you) and I was able to fully unlock, S-OFF, and load up a JB rom to my phone using the guide right on this site (http://forum.xda-developers.com/showthread.php?t=1801106) and some help from some online friends that have done this kind of thing before. I found all links to be working, and pretty much all steps to be covered. The I guess hardest part was the permanent S-OFF using the wire trick. I had to burn an Ubuntu live cd and boot a laptop with it, but I was even able to get that step done. A little frustrating with the timing, I think it took me about 8 tries until it finally unlocked. The only thing I think I initially missed was wiping all 3 caches, so I did a dirty flash that got stuck on the boot screen. After I wiped and loaded again, no problems. If you'd like any additional help, I get pretty bored at work, so find me on aim or gchat, or just shoot me a PM here, I think I should get notified
Good luck, it's not as bad as I thought it would be
Also I haven't personally tried it, but feel free to peruse this thread as well: http://forum.xda-developers.com/showthread.php?t=1696373
Note you'll need to have already achieved HTCDev unlocked and be rooted to use this (covered in that first link)
Hope that helps!
PsychoPhreak said:
First timer here as well (although long time computer user/programming familiar so I might have a better understanding of some things than you) and I was able to fully unlock, S-OFF, and load up a JB rom to my phone using the guide right on this site (http://forum.xda-developers.com/showthread.php?t=1801106) and some help from some online friends that have done this kind of thing before. I found all links to be working, and pretty much all steps to be covered. The I guess hardest part was the permanent S-OFF using the wire trick. I had to burn an Ubuntu live cd and boot a laptop with it, but I was even able to get that step done. A little frustrating with the timing, I think it took me about 8 tries until it finally unlocked. The only thing I think I initially missed was wiping all 3 caches, so I did a dirty flash that got stuck on the boot screen. After I wiped and loaded again, no problems. If you'd like any additional help, I get pretty bored at work, so find me on aim or gchat, or just shoot me a PM here, I think I should get notified
Good luck, it's not as bad as I thought it would be
Also I haven't personally tried it, but feel free to peruse this thread as well: http://forum.xda-developers.com/showthread.php?t=1696373
Note you'll need to have already achieved HTCDev unlocked and be rooted to use this (covered in that first link)
Hope that helps!
Click to expand...
Click to collapse
I'm following the first guide you linked. So far it's working I just flashed CWmod on and I loaded it according to the instructions in the guide "After fastboot finishes, disconnect your MT4GS, go into bootloader, and go to “RECOVERY.” You should now be in ClockworkMod Recovery 5.0.2.7. The first thing I would do in CWM Recovery is make a backup of your stock ROM for safe keeping. "
But I forgot to d/c my phone. It still loaded CWmod and I navigated to backup/restore and clicked it. Right now my phone has the clockwork logo in the middle but it didn't give me any prompts after selecting backup/restore. What's it doing? It's been doing this for like 5 minutes. Should I be worried that I forgot to d/c the cable and whatnot?
Thanks
GiftigDegen said:
I'm following the first guide you linked. So far it's working I just flashed CWmod on and I loaded it according to the instructions in the guide "After fastboot finishes, disconnect your MT4GS, go into bootloader, and go to “RECOVERY.” You should now be in ClockworkMod Recovery 5.0.2.7. The first thing I would do in CWM Recovery is make a backup of your stock ROM for safe keeping. "
But I forgot to d/c my phone. It still loaded CWmod and I navigated to backup/restore and clicked it. Right now my phone has the clockwork logo in the middle but it didn't give me any prompts after selecting backup/restore. What's it doing? It's been doing this for like 5 minutes. Should I be worried that I forgot to d/c the cable and whatnot?
Thanks
Click to expand...
Click to collapse
I wouldn't worry, and I'm not entirely sure what it's trying to do, perhaps the possibility of USB storage is throwing it off. At this point I'd say just try to disconnect it, pull the battery, and start back up into recovery, but without the USB attached this time. I imagine then you'll be fine and able to backup the stock image like they say for safe keeping.
One more dummy question (tech support for many years, always check the simple stuff first...) you do have SOME SD card in there right?
PsychoPhreak said:
I wouldn't worry, and I'm not entirely sure what it's trying to do, perhaps the possibility of USB storage is throwing it off. At this point I'd say just try to disconnect it, pull the battery, and start back up into recovery, but without the USB attached this time. I imagine then you'll be fine and able to backup the stock image like they say for safe keeping.
One more dummy question (tech support for many years, always check the simple stuff first...) you do have SOME SD card in there right?
Click to expand...
Click to collapse
Yeah, 32gb =)
booted into recovery, clicked on bacup/restore...still just showing the logo in the middle.
(PS any mods out there listening, I'd love to have that 5 minute restriction removed =D )
Okay, so the select button changes from power to the scroll pad once in recovery...good to know.
GiftigDegen said:
booted into recovery, clicked on bacup/restore...still just showing the logo in the middle.
(PS any mods out there listening, I'd love to have that 5 minute restriction removed =D )
Okay, so the select button changes from power to the scroll pad once in recovery...good to know.
Click to expand...
Click to collapse
NVMD....You got it now.
strapped365 said:
MikTouch is optimized stock... So updating it farther would take it a direction we wasn't going with it.
Bulletproof is even older. We don't have much here... But what's here is solid
Sent from my Nexus 4 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Using CWM to flash Miktouch now. Hopefully it works... =D
Just remember, if you are "S-On" you're going to need to fastboot flash boot boot.img after your ROM is thru flashing or you will hang up at the boot animation.
strapped365 said:
MikTouch is optimized stock... So updating it farther would take it a direction we wasn't going with it.
Bulletproof is even older. We don't have much here... But what's here is solid
Sent from my Nexus 4 using Tapatalk 4 Beta
Click to expand...
Click to collapse
K. First impressions:
When I restart the phone, the first thing it does is force stop Gmail and Youtube several times. Is this supposed to happen?
Also, I'm extremely impressed with the speed of the restart. It's at LEAST twice as fast as stock.
And, Genius button doesn't work even after installing the patch linked to on your website (universal.zip).
WeekendsR2Short said:
Just remember, if you are "S-On" you're going to need to fastboot flash boot boot.img after your ROM is thru flashing or you will hang up at the boot animation.
Click to expand...
Click to collapse
Thanks Weekends. I did that and it's installed, though I fastboot flash boot boot.img before I used CWM to flash the rom. Does that make a difference? Do you think doing it that way will fix the force close mentioned above?
If there's not a fix for the gmail/youtube force closes, is it possible to do bulletproof with s-on? Thoughts? I really want to stick as close to stock MT4GS but with as solid a system as possible.
Flashing boot image before ROM will overwrite kernel
Wipe all
Flash ROM
Flash boot
Reboot
Sent from my Nexus 4 using xda premium
demkantor said:
Flashing boot image before ROM will overwrite kernel
Wipe all
Flash ROM
Flash boot
Reboot
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
Another noob question. How do I wipe all?
Also, when I use CWM to install Mikrom it atuo restarts and loads up. Then do I restart again and go fastboot the new kernal?
Thank you all for how much help you have given me.
At the end of the updater-script there must be a reboot command, but being this ROM is based of stock you may not need to flash the kernel anyway.
Best methods for wiping is one of bluex's superwipe scripts or with fastboot
fastboot erase system -w
But being you are s-on that command may fail.
But always do a wipe data/factory reset, wipe cache, and wipe dalvik in recovery.
It also good practice to make a nandroid of current ROM before you flash anything
Sent from my Nexus 4 using xda premium
demkantor said:
At the end of the updater-script there must be a reboot command, but being this ROM is based of stock you may not need to flash the kernel anyway.
Best methods for wiping is one of bluex's superwipe scripts or with fastboot
fastboot erase system -w
But being you are s-on that command may fail.
But always do a wipe data/factory reset, wipe cache, and wipe dalvik in recovery.
It also good practice to make a nandroid of current ROM before you flash anything
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
Mmkay, working doing this now.
Quick question, hopefully someone can give me a link, but I'd love the install the depaginated app drawer, genius fix and menu wake up mods for this, but the links are broken (dev-host times out). Any help?
See weekends mirror thread
Sent from my Nexus 4 using xda premium