Related
Dear Folks at XDA,
I would like to ask for you help with my HTC Touch Pro 2. I recently tried to update it to the new AthineOS CHome TF3D WM6.5 Manila ROM v 1.0 and unfortunately I failed.
The problem is that my phone now freezes at the black startup screen with the Touch Pro 2 logo and the red codes at the bottom.
I've flashed the ROM several times before and never got this issue.
Due to the fact that the phone doesn't finish the boot-up and I thus I can't get ActiveSync I'm afraid I messed up my phone for ever.
Please someone tell me I got a way out of this, I'd appreciate it very much.
Greetz,
SjonSjon
umm.... I don't think you can change the firmware just yet on the CDMA version of the phone... if you used a HardSPL that's available in the Rhodium forums then you probably used a GSM specific ROM on your CDMA phone... not sure what to tell you other than making sure you read the CDMA forum before trying something so risky. Best solution, unless someone knows how fix your phone in it's current state, is to toss it under your car and run it over and try to cash in on the insurance.
Problem solved!
Hey guys,
I got my HTC Touch Pro 2 functioning again. Thought I'd post the solution for other people who might encounter the same issue. I don't exactly know what the problem was. I'm assuming a non-compatible ROM or something, but after opening 30 tabs in my browser and reading my eyes out I found that if you put your phone into bootloader mode and connect it through usb to your computer you can flash the ROM without using activesync.
So I turned my phone off, pressed the power and Volume Down button simultaneously and then used the Stock ROM upgrade software from HTC to restore my phone
This solution beats the hell outta "run it over and try to cash in on the insurance" if I say so myself!
Greetz,
SjonSjon
I am glad you have recovered the beautiful device; and thanks for sharing a working solution.
sjonsjon said:
Hey guys,
I got my HTC Touch Pro 2 functioning again. Thought I'd post the solution for other people who might encounter the same issue. I don't exactly know what the problem was. I'm assuming a non-compatible ROM or something, but after opening 30 tabs in my browser and reading my eyes out I found that if you put your phone into bootloader mode and connect it through usb to your computer you can flash the ROM without using activesync.
So I turned my phone off, pressed the power and Volume Down button simultaneously and then used the Stock ROM upgrade software from HTC to restore my phone
This solution beats the hell outta "run it over and try to cash in on the insurance" if I say so myself!
Greetz,
SjonSjon
Click to expand...
Click to collapse
Good job!
big thanks for solution.
You just saved my life!!!
Don't get our hopes up! This is the wrong forum. CDMA TP2s can't be flashed at all yet.
This was a life saver post so a quick bump for anyone that needs it.
I unlocked my CDMA phone, installed a few roms -- decided to go back to my stock rom default (which was Telus) -- reinstalled and bam -- bricked.
Well, technically it's not a brick if you can get back into the bootloader to reflash. So no worries everyone. If everyone reads instructions well enough we should hopefully see zero "real" bricks. Or at most, just enough to only build bbq pit rather than a house.
I think my phone is truly bricked
I was unlocking my phone (the HTC Touch Pro 2 <Verizon>) and I was using a Diamond unlocker (I thought it would be fine), but during the process there was a connection error and now my phone seems to be bricked. I can't get it to even turn on, get to a bootloader screen, or anything even remotely close.
The one odd thing that it does though, is when I connect it to my computer, it pops up and my computer recognizes there is a device there. In my Device Manager there is an unknown device called: Qualcomm CDMA Technologies MSM. I have tried every combination of two buttons, including holding down the reset button with all of them, but nothing gets me anywhere.
If anyone could help, I would really appreciate it. Let me know if you need any more information.
my cdma is rebooting endlessley i reflashed stock rom and evorything. it seriously dosnt want to work. its most sadness... i am cashing in on the insurence. but they are going to send me a refurb..
spend 600$ on a phone got inurnce i hope the used one dosnt fail me.
Esazi said:
I was unlocking my phone (the HTC Touch Pro 2 <Verizon>) and I was using a Diamond unlocker (I thought it would be fine), but during the process there was a connection error and now my phone seems to be bricked. I can't get it to even turn on, get to a bootloader screen, or anything even remotely close.
The one odd thing that it does though, is when I connect it to my computer, it pops up and my computer recognizes there is a device there. In my Device Manager there is an unknown device called: Qualcomm CDMA Technologies MSM. I have tried every combination of two buttons, including holding down the reset button with all of them, but nothing gets me anywhere.
If anyone could help, I would really appreciate it. Let me know if you need any more information.
Click to expand...
Click to collapse
I did the same exact thing to mt TP2. Same outcome.
We have to learn somehow....
That stinks man. If you did, then your phone is truly bricked. You are going to have to get a replacement or switch to another phone because there is nothing you can do to get it going again. I tried everything possible and eventually just ordered a replacement. I have it now and it's working beautifully, but needless to say I am a little scared away from any more unlocking or flashing for a while.
If you read carefully you dont have to be scared of flashing
I was a noob some time ago but before doing anything I took care of reading and understanding before doing nothing.
lesson learned
By now I have flashed more than 60 times on 3 diferent HTC devices and all were a succes
Hope you get your TP2 working again!
I hope I can get there
Someday I hope to be a flashing expert, but until then I will take it slow and read carefully. Thanks for your encouragement. When I actually get money to pay for the unlock for my TP2, I will let you know how flashing goes.
How do you keep the phone in bootloader? Mine goes right to the press volume instuction screen. Other than that I'm stuck on the black name screen,also my usb will not register in device manager. This was my first try at flashing.
gadgetgirl28 said:
You just saved my life!!!
Click to expand...
Click to collapse
Holy hell, you're not lying. Thanks for coming back to post your solution!
This post saved me at least a few hours of frustration and ever worsening decision making.
So it's totally true???
this situation hasn't solution;
I was unlocking my phone (the HTC Touch Pro 2 <SPRINT>) and I was using a Diamond unlocker (I thought it would be fine), but during the process there was a connection error and now my phone seems to be bricked. I can't get it to even turn on, get to a bootloader screen, or anything even remotely close.
The one odd thing that it does though, is when I connect it to my computer, it pops up and my computer recognizes there is a device there. In my Device Manager there is an unknown device called: Qualcomm CDMA Technologies MSM. I have tried every combination of two buttons, including holding down the reset button with all of them, but nothing gets me anywhere.
If anyone could help, AND PLEASE somebody tell me , that it can be save it
;9
please help
i have the same problem. is there a way to save my phone?
I just got the Captivate about a month ago. Had a regular phone for about a year, touch screen went out, bought a replacement digitizer but knew it was a temporary fix anyway and wanted a new phone. Convinced the maternal unit to use her contract extension to get me a new phone, and snagged the Captivate for $30 from RadioShack. My first Android phone, and I have to say I'm horribly disappointed, but I guess I'm doing something wrong here.
First two or three weeks, my mom had the phone and got to play around with it for a while. Wasn't until the 29th that I got the phone, and I just played around with it for a week and got all the apps I deemed useful and worthwhile. Eventually realized I couldn't use Flash in the browser, nor Skype, etc., without upgrading to 2.2.
So, I went through the tutorial Samsung provided, watched videos on Youtube just to be sure, but followed everything Samsung's tutorial said word for word. ... only for my phone to end up completely screwed up. Gallery, Browser, Music Player, Video Player, and many other default applications were missing. Now I'm smart enough with technology to think, okay, something's wrong. I knew about the factory reset, so I went to go to settings to do that, and realized. ... oh wait, the Settings menu is also missing. Wonderful. There was no "Settings" button in the Applications list, and if I tried getting to it from the menu button, it simply did nothing at all.
Found Odin, flashed back to 2.1, and then factory reset and got rid of every application I had and etc., so that absolutely nothing was on it, basically a stock phone. Tried upgrading again fresh, still following the instructions very closely. Same problem occurred, and I was pissed. Gave up on 2.2, tried flashing back to 2.1 /again/ with Odin, only for my phone to decide it didn't want to enter download mode anymore. Forced it using 'adb reboot download', but alas, it locked up in the middle of flashing back to 2.1 and wouldn't do anything. I waited about 30 minutes to see if it'd resume the flashing process at all, but nothing, so I regrettably had to disconnect the USB cable and hard brick the phone (wouldn't turn on or anything).
Still under warranty, so I replaced it from RadioShack, and now have a new Captivate. Went ahead and installed all the applications I needed, used the Sideload Wonder Machine to install a few third-party applications, had no problem doing that for a while. Didn't bother attempting to upgrade. However, my computer got a trojan and deleted the MBR. Repaired using the XP boot disc, but it meant I was back on SP2. After installing every last one of the damn updates all over again, I decided to check up on some new applications to install via sideloading.
Hooked up my phone, it detected all the new hardware again since the drivers seemingly were also lost amongst everything else during the repair, only for it to encounter an error on the "Samsung Android Composite ADB Interface". So, I uninstalled the drivers, tried installing them manually. Hooked up the phone, but it still wanted to try to install that one driver and failed. I've restarted my computer, uninstalled the drivers, attempted manually installing them through device manager, you name it. Still can't get it to work -- it keeps having a fatal error every time. However, it's only when my phone has USB Debugging on. Installs every single driver perfectly fine when it's off, in MTP/Mass Storage/Kies mode. Just has a "fatal error" in USB Debugging on that one driver.
tl;dr, the drivers are broken on my computer and I can't fix them despite actually /not/ being computer illiterate. And, I kind of still want 2.2, but apparently the stock 2.2 update is a pain in the rear end and I no longer have a warranty through RadioShack now, so I can't risk bricking my phone due to a faulty update process. Any suggestions?
err, the only thing you should have needed to do was install the latest version of Kies, plugged the phone in, it would have prompted you to do the update. It's quite painless..
Edit: Sorry irrelevant
sw411 said:
err, the only thing you should have needed to do was install the latest version of Kies, plugged the phone in, it would have prompted you to do the update. It's quite painless..
Click to expand...
Click to collapse
At the time I tried, Kies itself didn't support the Captivate. Only Kies mini. And in order to do that upgrade, I had to install the drivers, then put the phone into download mode to install more drivers for some odd reason, restart the phone (taking out the battery and putting it back in), then hook it up. Kies mini wouldn't detect the phone for several tries at first, finally got it about the 10th time in. Then go to the "Upgrade phone" link, and yeah. I followed the instructions from Samsung's official SGH-i897 Froyo upgrade guide.
I did EXACTLY as the instructions say, down to the wire. Still ended up both times with all those applications missing and the settings panel missing, unable to do a factory reset without flashing back to 2.1 first.
Install z4root and root phone
Install rom manager
Flash clockwordmod recovery from rom manager
Choose a 2.2 rom from the forums
Download and copy to SD card
Install via rom manager
????????
Profit
Hope this helps. Btw I reccomend firefly or serendipity for the rom
Sent from my Captivate running CyanogenMod7 using XDA Premium App
brendanmurphy said:
Install z4root and root phone
Install rom manager
Flash clockwordmod recovery from rom manager
Choose a 2.2 rom from the forums
Download and copy to SD card
Install via rom manager
????????
Profit
Hope this helps. Btw I reccomend firefly or serendipity for the rom
Sent from my Captivate running CyanogenMod7 using XDA Premium App
Click to expand...
Click to collapse
Only downside to rooting the phone is the voided warranty. I don't entirely know what I'm doing there when it comes to flashing, and if I manage to do something wrong and brick the phone again, I'm completely wiped. I don't have the money to replace the phone at all. I have no job. ._. Only reason I got the phone was because I managed to get some spare money fixing up a friend's computer, and the maternal unit's contract extension was available. I'm not paying for the phone, still my parents. Damn economy in this state is so broken, and I'm screwed over worse since I have no diploma.
However, I was looking into info on the roms, and while I was tempted to try out CM7 for the fact it was 2.3, I actually considered getting Paragon RC6 from what I had read. Just decided not to because I can't replace the phone if I screwed up. In the slim chance I do opt to risk not having a phone at all if I do something wrong, would you say Paragon's worthwhile or would it be better to go with Serendipity? I do like TouchWiz, and Wifi access is a must (200 MB plan isn't going to cover it with how I use data; I'm frequently using Wifi in as many places as is possible), but I'm pretty sure both of those are fine there. Just not really sure which would be better overall, performance-wise.
I can't do either of them right now anyway until I figure out why the drivers aren't installing. So that's my first issue.
Don't worry about bricking I almost guarantee you will brick your phone once. But that is what Odin is for and it's almost impossible to hard brick a phone these days. Just install paragon with the instructions I gave its really fool proof these days to install rom. You will learn by trying if you mess up so be it that's what xda is here for to help.
Drop me a pm anytime if you need help
Sent from my Captivate running CyanogenMod7 using XDA Premium App
brendanmurphy said:
Don't worry about bricking I almost guarantee you will brick your phone once. But that is what Odin is for and it's almost impossible to hard brick a phone these days. Just install paragon with the instructions I gave its really fool proof these days to install rom. You will learn by trying if you mess up so be it that's what xda is here for to help.
Drop me a pm anytime if you need help
Sent from my Captivate running CyanogenMod7 using XDA Premium App
Click to expand...
Click to collapse
Well. Despite it being almost impossible, I've managed it once already within the first month of having one. Kind of why I'm a bit skittish about actually going through with it. I'm definitely all about modding and customizing things to your liking, but not having the funds to fall back on if I /do/ screw up bigtime again, yeeeeah.
After looking at Firefly and Serendipity thoroughly, though, I'm impressed. It's a tough choice between the three (Paragon, Serendipity, and Firefly). I'm leaning towards Serendipity now though after watching a video just to see the interface. Kinda not a huge fan of the GB launcher -- I liked the side-scrolling app launcher more, honestly -- but that's not a big deal.
So, let's see if I've got the details down right before I try anything. Search z4root in Market, install. Subsequently get Rom Manager, install it. Flash ClockworkMod (via Rom Manager). Pick a 2.2 rom (which will be a tough choice), and download it to my microSD card to put in the phone. Install said rom (via Rom Manager). And then, voila, it's done.
Did I miss anything, or am I actually following instructions right here?
Edit: Nope, can't find z4root in the Market anyways. Means I'd have to Sideload it, and until I get this driver issue solved, that's not gonna work either. That's gonna be the first thing necessary to fix since it also means I can't use Odin if I do anything wrong... Downloading Serendipity now though, so if I can get that fixed, I may go ahead and try this out after I get some sleep. But since I'm nocturnal, time for some rest. Hoping for some tips or pointers when I get back on. Definitely looking forward to good experiences with XDA and my Android phone.
Yea those are the exact steps its really simple. http://forum.xda-developers.com/showthread.php?t=944418 try this it will install drivers for you ans sideload apps. This is a useful tool
Sent from my Captivate running CyanogenMod7 using XDA Premium App
The.Se7enth said:
Only downside to rooting the phone is the voided warranty.
Click to expand...
Click to collapse
Quick question. Did you purchase the insurance through AT&T for the phone? If so, you will most likely always be able to get it replaced even if it's been rooted. It's just as simple as calling the help line, and saying that you have no idea what happened, and it won't work now. Of course that is worst case scenario
From my experience, the Captivate is a pretty difficult phone to hard brick compared to some others. For a beginner, all of this can be somewhat overwhelming, we've all been there. But once you get the hang of the whole process, you'll be good to go!
Yeah I've done that once already. Just called in and told them that it seems like a software problem and they replaced it no charge.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
Beginner help....
AT&T warranty is for 1 year on new phones, 90 days on phones you purchase as refurbished. (30 day "I just don't like THIS phone" replacement/return in both cases.) If Radio Shack will not replace the phone, AT&T should swap. If neither is willing to help, Samsung will honor their 1 year warranty, but it requires shipping back to Samsung.
Your situation sounds like your Windows PC is the problem. A complete reinstall of Windows & apps (not just a quick MBR repair / install over top of existing stuff) may be your best bet if you can't use a different machine.
Kies Mini should upgrade your phone to 2.2 painlessly - without you having to do anything but plug it in and click the on screen button.
Also if you root and need to return it just flash back to stock which will take away root and at$t is none the wiser, most likely
peypey008 said:
Quick question. Did you purchase the insurance through AT&T for the phone? If so, you will most likely always be able to get it replaced even if it's been rooted. It's just as simple as calling the help line, and saying that you have no idea what happened, and it won't work now. Of course that is worst case scenario
From my experience, the Captivate is a pretty difficult phone to hard brick compared to some others. For a beginner, all of this can be somewhat overwhelming, we've all been there. But once you get the hang of the whole process, you'll be good to go!
Click to expand...
Click to collapse
Nope. Don't feel their insurance policies are worth it. You spend more money on the insurance policy in total, even if it's month-to-month, than you would on a brand new contractless phone. Besides, I had only made $120 from fixing up three ancient computers (so ancient they actually had ISA slots and DIMM SD-RAM memory -- one was even a Pentium II), and only had $50 by the time I bought the phone which was a couple months later. My $50 went towards the phone and a pack of screen protectors, while my mom covered the upgrade fee. Couldn't afford the insurance policy even if we wanted to.
But I do greatly appreciate the encouragement. I'll give it a go in a bit, and try out flashing Serendipity. I'll follow the official instructions from their own website though, because I read this on their FAQ:
"Never use ROM Manager. EVER, EVER, EVER, EVER, EVER!"
pouelle said:
AT&T warranty is for 1 year on new phones, 90 days on phones you purchase as refurbished. (30 day "I just don't like THIS phone" replacement/return in both cases.) If Radio Shack will not replace the phone, AT&T should swap. If neither is willing to help, Samsung will honor their 1 year warranty, but it requires shipping back to Samsung.
Your situation sounds like your Windows PC is the problem. A complete reinstall of Windows & apps (not just a quick MBR repair / install over top of existing stuff) may be your best bet if you can't use a different machine.
Kies Mini should upgrade your phone to 2.2 painlessly - without you having to do anything but plug it in and click the on screen button.
Click to expand...
Click to collapse
RadioShack replaced the phone the first time, but the manager there said after replacing it once, the warranty was thus void. I'm not sure if profanity is allowed here, but you can figure out which word I wanted to reply to him. It's eight letters long, starts with bull.
I've read posts on AT&T forums saying if the phone's bricked or can't be repaired by user methods though, especially if it's rooted, that they won't honor the warranty at all and will consider it user error and that you're out of luck. Even people who tried to upgrade to 2.2 stock had issues with that. But I dunno.
Anyways, my machine works perfectly for everything else. Before the repair, when I tried to upgrade? It was a fresh install. I had just reformatted it because it was performing sluggish before and I decided I wanted a single-boot installation instead of having my old dual-boot of Windows 7 and XP. It's now just XP for the time being, seeing as how the hardware's limited and I want to get the best out of it for gaming (I can run 7 with ease, but it uses more resources than XP, thus games don't run as well).
I realize earlier I may have come off as implying the upgrade to 2.2 process was difficult. I don't mean it was "difficult" by any means necessary. It was simply a plug the phone in, let all the drivers install, unhook and put in download mode, hook up again for more drivers. Restart phone, start up kies, hook up phone, and click "Upgrade phone" button. Accept the terms of service or whatever, and wait. Upgrade starts, phone flips into download mode on it's own, restarts a couple times, and voila, you're on 2.2. I thought it was a piece of cake. My issue is that regardless of how easy it was, it still ended up rather broken because all those applications were missing, on top of the fact the Settings panel was also gone, leaving me unable to perform a factory reset.
I have one last question. If I do somehow manage to get these drivers to work again (without reformatting, which I don't have the time to do), should I have the SIM card out while flashing the ROM? I'm wondering, subconsciously, if somehow that may have had something to do with the upgrade to 2.2 screwing up so bad. I had the SIM card in, with all my applications installed at first. Second time, no apps or anything were installed, but the SIM card was still in.
Edit: Well aware of most forums having a "do not double post" rule, as much as I want to bump this thread with an update on the issue. But, I've restarted my computer, tried a different USB cable, uninstalled and reinstalled the drivers from numerous different sources, and still the same "fatal error" issue on "Samsung Android ADB Composite Interface". I simply cannot get that to install whatsoever, and without it, the phone isn't detected as being hooked up even by SWM, much less anything else. Seriously, what do I do? I'm not reformatting my computer, because I simply see no reason for it, but I have no other computer I can use. How do I get these drivers to install properly like they did before?
The.Se7enth said:
At the time I tried, Kies itself didn't support the Captivate. Only Kies mini. And in order to do that upgrade, I had to install the drivers, then put the phone into download mode to install more drivers for some odd reason, restart the phone (taking out the battery and putting it back in), then hook it up. Kies mini wouldn't detect the phone for several tries at first, finally got it about the 10th time in. Then go to the "Upgrade phone" link, and yeah. I followed the instructions from Samsung's official SGH-i897 Froyo upgrade guide.
I did EXACTLY as the instructions say, down to the wire. Still ended up both times with all those applications missing and the settings panel missing, unable to do a factory reset without flashing back to 2.1 first.
Click to expand...
Click to collapse
Fail, Kies Mini works from Kies mode on the phone. It puts the phone into download mode when you start the upgrade from Kies Mini.
Just saying...
The.Se7enth said:
Nope. Don't feel their insurance policies are worth it. You spend more money on the insurance policy in total, even if it's month-to-month, than you would on a brand new contractless phone. Besides, I had only made $120 from fixing up three ancient computers (so ancient they actually had ISA slots and DIMM SD-RAM memory -- one was even a Pentium II), and only had $50 by the time I bought the phone which was a couple months later. My $50 went towards the phone and a pack of screen protectors, while my mom covered the upgrade fee. Couldn't afford the insurance policy even if we wanted to.
But I do greatly appreciate the encouragement. I'll give it a go in a bit, and try out flashing Serendipity. I'll follow the official instructions from their own website though, because I read this on their FAQ:
"Never use ROM Manager. EVER, EVER, EVER, EVER, EVER!"
RadioShack replaced the phone the first time, but the manager there said after replacing it once, the warranty was thus void. I'm not sure if profanity is allowed here, but you can figure out which word I wanted to reply to him. It's eight letters long, starts with bull.
I've read posts on AT&T forums saying if the phone's bricked or can't be repaired by user methods though, especially if it's rooted, that they won't honor the warranty at all and will consider it user error and that you're out of luck. Even people who tried to upgrade to 2.2 stock had issues with that. But I dunno.
Anyways, my machine works perfectly for everything else. Before the repair, when I tried to upgrade? It was a fresh install. I had just reformatted it because it was performing sluggish before and I decided I wanted a single-boot installation instead of having my old dual-boot of Windows 7 and XP. It's now just XP for the time being, seeing as how the hardware's limited and I want to get the best out of it for gaming (I can run 7 with ease, but it uses more resources than XP, thus games don't run as well).
I realize earlier I may have come off as implying the upgrade to 2.2 process was difficult. I don't mean it was "difficult" by any means necessary. It was simply a plug the phone in, let all the drivers install, unhook and put in download mode, hook up again for more drivers. Restart phone, start up kies, hook up phone, and click "Upgrade phone" button. Accept the terms of service or whatever, and wait. Upgrade starts, phone flips into download mode on it's own, restarts a couple times, and voila, you're on 2.2. I thought it was a piece of cake. My issue is that regardless of how easy it was, it still ended up rather broken because all those applications were missing, on top of the fact the Settings panel was also gone, leaving me unable to perform a factory reset.
I have one last question. If I do somehow manage to get these drivers to work again (without reformatting, which I don't have the time to do), should I have the SIM card out while flashing the ROM? I'm wondering, subconsciously, if somehow that may have had something to do with the upgrade to 2.2 screwing up so bad. I had the SIM card in, with all my applications installed at first. Second time, no apps or anything were installed, but the SIM card was still in.
Edit: Well aware of most forums having a "do not double post" rule, as much as I want to bump this thread with an update on the issue. But, I've restarted my computer, tried a different USB cable, uninstalled and reinstalled the drivers from numerous different sources, and still the same "fatal error" issue on "Samsung Android ADB Composite Interface". I simply cannot get that to install whatsoever, and without it, the phone isn't detected as being hooked up even by SWM, much less anything else. Seriously, what do I do? I'm not reformatting my computer, because I simply see no reason for it, but I have no other computer I can use. How do I get these drivers to install properly like they did before?
Click to expand...
Click to collapse
Yea once you have serendipity installed don't use rom manager but for initial install your fine
Sent from my Captivate running CyanogenMod7 using XDA Premium App
cappysw10 said:
Fail, Kies Mini works from Kies mode on the phone. It puts the phone into download mode when you start the upgrade from Kies Mini.
Just saying...
Click to expand...
Click to collapse
You can "say" all you want, my good sir, but google the instructions. They tell you clearly to put the phone into download mode TO FINISH INSTALLING DRIVERS. You don't start up Kies mini until after all the drivers are installed, at which point you hook up the phone with USB Debugging, not Kies mode. I appreciate your willingness to help, but be sure to read everything I say before you correct me. I'm not that slow. I read instructions thoroughly and I've read quite a lot of posts on these forums. I work with computers regularly -- just not Android. The issue had nothing to do with that anyway, so that doesn't even matter.
brendanmurphy said:
Yea once you have serendipity installed don't use rom manager but for initial install your fine
Sent from my Captivate running CyanogenMod7 using XDA Premium App
Click to expand...
Click to collapse
I'm sure it's possible, and I don't mean to come off disrespectful, but I'm just gonna go with the instructions on their website. Just seems a safer route to install a ROM by the creator's instructions, you know? Only thing I'm not sure about is what they mean by "Flash it in 2e recovery (twice)." on ClockworkMod.
The.Se7enth said:
I have one last question. If I do somehow manage to get these drivers to work again (without reformatting, which I don't have the time to do), should I have the SIM card out while flashing the ROM? I'm wondering, subconsciously, if somehow that may have had something to do with the upgrade to 2.2 screwing up so bad. I had the SIM card in, with all my applications installed at first. Second time, no apps or anything were installed, but the SIM card was still in.
Edit: Well aware of most forums having a "do not double post" rule, as much as I want to bump this thread with an update on the issue. But, I've restarted my computer, tried a different USB cable, uninstalled and reinstalled the drivers from numerous different sources, and still the same "fatal error" issue on "Samsung Android ADB Composite Interface". I simply cannot get that to install whatsoever, and without it, the phone isn't detected as being hooked up even by SWM, much less anything else. Seriously, what do I do? I'm not reformatting my computer, because I simply see no reason for it, but I have no other computer I can use. How do I get these drivers to install properly like they did before?
Click to expand...
Click to collapse
These two are still my top questions now. Is it a good idea to have the SIM card out during the upgrade process, and not put it back in until after the update is 100% complete?
Also, I'm really frustrated about this whole driver thing. I know the drivers aren't broken because I used them on this very computer before, and the repair shouldn't have damaged anything because absolutely everything else is working flawlessly. But every time I've uninstalled the drivers completely, and hook up the phone, it keeps getting a fatal error on that. Apparently "S3C6410 Android ADB" is the name of the device that can't install drivers.
How I bricked my Desire S - information on avoiding brick and an indictment of the dubious nature of HTC's S-on policy
The Desire S is a great phone so why did I want to root it?
The main reasons for rooting and s-off for me were:
Titanium backup (android built in backup is weak)
Being able to remove bloatware that takes up unnecessary spaces and unnecessarily reduces battery performance.
To try different ROMs from the community
Video screen capture
And of course I bought the phone so isn't it mine to use as I please.
Having waited a long time for a good s-off tool to come out I was getting more and more anxious to s-off.
Alpharev got together with Unrevoked to create Revolutionary.
I had previously used the Unrevoked tool to root my first generation Desire. The tool worked easily and flawlessly even on my Mac.
I later used the Alpharev bootable CD to s-off and root a later generation Desire. Again it worked smoothly and flawlessly.
Having had this positive experience I felt confident in the new tool, Revolutionary.
I read everything I could find about how the tool worked and how others were finding results. All seemed straight forward and uncomplicated so I proceeded to download and run the tool from my PC because there was no Mac version available.
Temp root and s-off went smoothly. No apparent issuse. Both Hboot and Fastboot had been successfully replaced on the phone, and CWM recovery was working.
So I added su in recovery then ran a nand backup of the whole system at this point.
Then I downloaded a Cyan 7 ported for the Desire S that was getting good reviews and feedback. The rom seemed to flash clean. After running it for a short time it stated crashing, so I decided to try an MIUI ported to Desire S. Again a ROM with good feedback and labeled as stable.
Downloaded the ROM and flashed it after a full wipe in recovery.
This time on reboot the phone hung at the HTC screen on boot for a very long time. So I wanted to do a force shutdown.
Here is where things got ugly.
The Desire S does not have a force shutdown keystroke combo as my old Desire did. So I opted to pull the battery.
Reinserting the battery and booting into recovery nothing worked properly.
CWM wouldn't mount its partitions, wouldn't flash a rom or even do a factory reset.
I tried doing some functions in fastboot mode. But nothing worked. Any command issued in fastboot mode would just lock up the phone and terminal.
At this point I was pretty worried so I got on #revolutionary and chatted with some of the big guns. I got some good feedback to test this and try that but in the end nothing worked. So I got on XDA forum and looked for others with similar issues.
What I found at this point was very troubling.
XDA user opumps had the same issue as me and had done some great research about the problem.
http://forum.xda-developers.com/showthread.php?t=1150917
It becomes clear on reading, that like him, my Desire S had a fried eMMC chip. This is the internal storage device for HBoot. Once cooked your are basically F*ucked. There is no recovering from this by reformatting the eMMC. Pooched.
Doing the tests on the XDA post I found my eMMC to be pooched.
Now the question is, What fried the eMMc? Was it the S=off process or the forced pulling of the battery while the phone was boot locked?
I then took the phone to HTCs warranty center.
They tested the phone and called me back a few hours later. Your eMMC chip is fried they said. Yes, I said, Can you fix it please?
He told me that the eMMc was fried by the s-off tool I had used. Now, maybe he is full of **** and just wants an excuse to void my warranty. And, maybe not.
I told him to go ahead and fix it. He told me it would be a $200 Dollar replacement of the main board. ****. Well, what other choice do I have. Do it, I told him.
Next I got on the phone with the HTC help center. I got friendly with the lady technician on the call. After some nice chat I started probing for information on the Desire S. After a long conversation She told me that the Desire S, Incredible S, Desire HD all have the problem of frying the eMMC chip if the battery is disconnected while power is on. She said she gets calls every day with people who have fried their eMMC chip. Not through S-off but just because the battery came loose and lost contact while the phone was on or charging. The main reasons for the issue are as follows, HTC cheaped out on the eMMC chips in these phones, as the issue is specific to a particular series of eMMc. And because of a design flaw in the way the battery door closes, and because HTC did not include a force shutdown key combination to shut the phone off properly when locked.
So in the end it sounds like a lot of bad design and bad planning and poor foresight on HTC's part led to the fried eMMC on my phone. But they are not willing to stand behind their product and found an excuse to void my warranty and make me pay for the replacement Mainboard.
Now, here is where we get into the debate of should anyone s-off their phone? The main point here is no one should have to s-off. The phones should never be shipped s-on. It's bad policy to lock the bootloader. But having received an s-on phone you may very well want to s-off. If you decide to s-off just remember that you could easily brick your phone by many ways not related to s-off and your warranty will be void.
Another option is to not buy HTC because of the design flaws and their bad locked bootloader policy. To unlock and root a Samsung all you have to do is issue the command fastboot oem unlock. I don't know if Samsung phones also have the eMMc chip issue, so I can't comment there. But I certainly prefer their open policy on bootloaders.
Maybe the whole reason for locked bootloaders from HTC is beacause they are aware that they used sub par eMMc chips and are trying to reduce bricks.
Regardless this experience has made me very dubious of HTC in general.
I hope this is helpful and educational.
Thanks for sharing, I removed my battery a couple of times while stuck in htc logo screen. Don't think I'll try that move again, anyway I read about holding power + vol up + vol down to force shutdown, wondering whether that works...
Sent from my HTC Desire S using XDA App
monkey21stc said:
Thanks for sharing, I removed my battery a couple of times while stuck in htc logo screen. Don't think I'll try that move again, anyway I read about holding power + vol up + vol down to force shutdown, wondering whether that works...
Sent from my HTC Desire S using XDA App
Click to expand...
Click to collapse
Again, thanks for warning.sorry to hear your struggle, disappointed that htc use this tactic, will certainly reconsider buying an alternate make device next time of this issue persists
The volume up plus volume down plus power button combination does work, it's just but published
Very often, although have yet trio try out when the devices has hung, but certainly reboots my device .
Swyped from HTC Desire S using XDA Premium
just fyi in germay they take 184 € to repair a bricked eMMc :-(
Aye, Thanks for Sharing. I'v hade the same problem as you. I'll never buy an HTC phone again. Cheap bastards!
i need to know that every chip is different...bad for u that u got the bad one but i flash phone daily and its ok..i have same procedure every time i do that..to brick phone can happen to experts too...well if u want to risk to get root and all goodies u can say good bay to warranty..thats for sure
thanks for sharing man.
monkey21stc said:
Thanks for sharing, I removed my battery a couple of times while stuck in htc logo screen. Don't think I'll try that move again, anyway I read about holding power + vol up + vol down to force shutdown, wondering whether that works...
Sent from my HTC Desire S using XDA App
Click to expand...
Click to collapse
that works on miui
Buy a htc with simlock.
Mine is t-mobile
When I've started my device for the first time, is was already s-off because if I turn my phone on it will show the t-mobile logo
So u can't brick your phone if you will s-off
But thanks for sharing
Next time I won't buy a htc
Sent from my HTC Desire S using XDA Premium App
Just remember though flash memory is extremely volatile, and ripping a battery out of a phone generally isn't a good idea to begin with, although I was lucky to read about the vol up/down + power procedure before I rooted my phone.
Very interesting post, interesting to see the bigger picture behind this issue.
so here's the deal - I am 99.9% sure that the bricked eMMC chip is a problem only in devices with a chip that was faulty in the first place. When the phone first came out, there were MANY threads on the hardware faults like "Battery cover not fitting" and "Misaligned screen". This was an issue that could't be identified easily, so it wasn't reported. Now, many people are having this issue and instead of panicking, we should do some research. I think that all the guys who bricked their phone would be living close to each other, in the same country or at least the same continent ie, this is a local issue. Also, i'm sure they had one of the other issues i mentioned above. I've not seen anyone in India or Asia with any such issues, so i think we need to find out why europe is having problems. Contact the BRICKees, i'll try making a new thread.
^^^.. yes this issue you need to find the Source.. I sold my Desire yestreday to get Hold of the Desire S but my only concern is this Dead eMMC chip.. and that is the reason I am not buying it yet... I want to identofy the ones with this issue..
really I dont want to screw up my 40K Rs on a faulty set..
Got the same problem, accidentally bricked a DS with a faulty Samsung eMMC, barely 3 weeks after buying it and 2 weeks after S/OFF'ing and rooting it... (btw, isn't it strange that Samsung chips that you find in Samsung branded phones don't seem to have this problem, but strangely the chips sold to their competitors seem to always be somehow sub-par ? Clever and sneaky way to undermine the competition, if you ask me. But at the same time, I bought a SGS2 as replacement in the meantime. ^^ even though it heats up a bit, it's way better than the DS )...
Haven't RMA'd the DS yet, I'm trying my damnedest to find a way to S-ON again and trash the remainder of the partition table -so the service center won't gimme **** about it.. So far I've been able to revert back from Alpharev SOFF to PVT ENG SOFF (0.98.2000), but even this has been horribly hard to achieve.. The "secret fastboot command" to totally brick a NAND didn't work, of course. Had to do it all by hand, in the dead of night, losing many hours of sleep in the process.. :/
It's really shameful that HTC is using such deviant ways to cover their own ****ups and to shirk the payment of their dues.. So I really got no qualms about trying to con them into replacing the device under warranty either. "tit for tat", or so they say.. And they shouldn't be surprised if I never ever again buy a phone from them either, that's really bad PR if y'ask me...
PS : I just got one of those mischievous ideas that often occur to me during sleepless nights : I've read here and there about how dangerous flashing a radio is, and it should only be done if necessary, yadda-yadda-yadda... (heck, I was at my 4th radio flash -just for the fun of it, didn't even have any reception or battery problems to justify it- when I bricked my DS, and I can tell y'all that it wasn't what ****ed it up :S)
Let's just imagine -that's a hypothesis, of course- that I attempted flashing a new radio, and one of my cats "accidentally" jumped on the desk and ripped the usb cord away from the phone, making it drop down on the floor, dislodging the battery in the process.. Wouldn't this brick it nice and proper, and render the NAND totally unreadable even for a HTC service center ? xD
I guess they got a XTC device at hand, but would that help in such a case ?
Can someone confirm what exactly is meant by pressing Power and Volume + and - at the same time? Press Power and press both ends of the volume rocker switch at once? Is that it?
first press the two volume buttons and then power until it shuts down.
worked for me at least -I just learned about that trick a trifle too late
your story said that it includes desire HD? wow i didn't know that honestly when my old DHD freezed i always pull the battery out and no problems at all it's just that the constant carmode problem irritated me and ended up selling it and bought a Desire S...not yet rooted and S-Off but will do later...so it's not the S-off process it's the battery thingy...it sucks for that to happen
Thanks for guide. I'm really scare of eMMC chip problems. I never tried to S-OFF coz of eMMC chip problems. Don't wanna to make void the warranty
Thanks for sharing! I have removed my battery a few times already to force shutdown. Don't know if I'll ever try it again. Maybe as a last resort, but at least I know the risks now. Thanks again!
Sent from my HTC Desire S using XDA App
Cool thanks for Sharring
Sent from my HTC Desire S using XDA App
i work my whole life with pc, hardware, software, flashed everything from set-top boxes to mobile phones.
seriously, i can't believe that anybody can fry the eMMC (a ****ing simple NAND-based flash memory) cause he puts SOFTWARE on it - thats what it build for!!!
you can brick your phone if you destroy the bootloader or something without a possibility to fix it, this won't destroy any hardware on your phone - but thats a different story.
the only reason for s-on is to take you the chance to deinstall the bloatware which they pollute their devices.
apairofscissors said:
How I bricked my Desire S - information on avoiding brick and an indictment of the dubious nature of HTC's S-on policy
The Desire S is a great phone so why did I want to root it?
The main reasons for rooting and s-off for me were:
Titanium backup (android built in backup is weak)
Being able to remove bloatware that takes up unnecessary spaces and unnecessarily reduces battery performance.
To try different ROMs from the community
Video screen capture
And of course I bought the phone so isn't it mine to use as I please.
Having waited a long time for a good s-off tool to come out I was getting more and more anxious to s-off.
Alpharev got together with Unrevoked to create Revolutionary.
I had previously used the Unrevoked tool to root my first generation Desire. The tool worked easily and flawlessly even on my Mac.
I later used the Alpharev bootable CD to s-off and root a later generation Desire. Again it worked smoothly and flawlessly.
Having had this positive experience I felt confident in the new tool, Revolutionary.
I read everything I could find about how the tool worked and how others were finding results. All seemed straight forward and uncomplicated so I proceeded to download and run the tool from my PC because there was no Mac version available.
Temp root and s-off went smoothly. No apparent issuse. Both Hboot and Fastboot had been successfully replaced on the phone, and CWM recovery was working.
So I added su in recovery then ran a nand backup of the whole system at this point.
Then I downloaded a Cyan 7 ported for the Desire S that was getting good reviews and feedback. The rom seemed to flash clean. After running it for a short time it stated crashing, so I decided to try an MIUI ported to Desire S. Again a ROM with good feedback and labeled as stable.
Downloaded the ROM and flashed it after a full wipe in recovery.
This time on reboot the phone hung at the HTC screen on boot for a very long time. So I wanted to do a force shutdown.
Here is where things got ugly.
The Desire S does not have a force shutdown keystroke combo as my old Desire did. So I opted to pull the battery.
Reinserting the battery and booting into recovery nothing worked properly.
CWM wouldn't mount its partitions, wouldn't flash a rom or even do a factory reset.
I tried doing some functions in fastboot mode. But nothing worked. Any command issued in fastboot mode would just lock up the phone and terminal.
At this point I was pretty worried so I got on #revolutionary and chatted with some of the big guns. I got some good feedback to test this and try that but in the end nothing worked. So I got on XDA forum and looked for others with similar issues.
What I found at this point was very troubling.
XDA user opumps had the same issue as me and had done some great research about the problem.
http://forum.xda-developers.com/showthread.php?t=1150917
It becomes clear on reading, that like him, my Desire S had a fried eMMC chip. This is the internal storage device for HBoot. Once cooked your are basically F*ucked. There is no recovering from this by reformatting the eMMC. Pooched.
Doing the tests on the XDA post I found my eMMC to be pooched.
Now the question is, What fried the eMMc? Was it the S=off process or the forced pulling of the battery while the phone was boot locked?
I then took the phone to HTCs warranty center.
They tested the phone and called me back a few hours later. Your eMMC chip is fried they said. Yes, I said, Can you fix it please?
He told me that the eMMc was fried by the s-off tool I had used. Now, maybe he is full of **** and just wants an excuse to void my warranty. And, maybe not.
I told him to go ahead and fix it. He told me it would be a $200 Dollar replacement of the main board. ****. Well, what other choice do I have. Do it, I told him.
Next I got on the phone with the HTC help center. I got friendly with the lady technician on the call. After some nice chat I started probing for information on the Desire S. After a long conversation She told me that the Desire S, Incredible S, Desire HD all have the problem of frying the eMMC chip if the battery is disconnected while power is on. She said she gets calls every day with people who have fried their eMMC chip. Not through S-off but just because the battery came loose and lost contact while the phone was on or charging. The main reasons for the issue are as follows, HTC cheaped out on the eMMC chips in these phones, as the issue is specific to a particular series of eMMc. And because of a design flaw in the way the battery door closes, and because HTC did not include a force shutdown key combination to shut the phone off properly when locked.
So in the end it sounds like a lot of bad design and bad planning and poor foresight on HTC's part led to the fried eMMC on my phone. But they are not willing to stand behind their product and found an excuse to void my warranty and make me pay for the replacement Mainboard.
Now, here is where we get into the debate of should anyone s-off their phone? The main point here is no one should have to s-off. The phones should never be shipped s-on. It's bad policy to lock the bootloader. But having received an s-on phone you may very well want to s-off. If you decide to s-off just remember that you could easily brick your phone by many ways not related to s-off and your warranty will be void.
Another option is to not buy HTC because of the design flaws and their bad locked bootloader policy. To unlock and root a Samsung all you have to do is issue the command fastboot oem unlock. I don't know if Samsung phones also have the eMMc chip issue, so I can't comment there. But I certainly prefer their open policy on bootloaders.
Maybe the whole reason for locked bootloaders from HTC is beacause they are aware that they used sub par eMMc chips and are trying to reduce bricks.
Regardless this experience has made me very dubious of HTC in general.
I hope this is helpful and educational.
Click to expand...
Click to collapse
Please change the title of the thread to "how not to brick your desire s". The current one sounds really fun and why any one would want a guide to brick their phone.
Sent from Desire Aj'S using XDA eXtra Premium App!
My wife installed some updates in the market and her phone froze on the Sense home screen. Removed the battery, and it now won't boot past the HTC logo.
It is on the factory/default Sense ROM, never rooted or anything, my wife has like 5 apps on it and still the stock Sense wallpaper
It can boot into HBOOT, we tried the recovery option which showed the black screen with phone+green arrow animation for a few seconds. Then very shortly an image with a red arrow, then a reboot and still stuck on the HTC boot screen.
It does not show up in ADB, USB debugging is not on either.
My next thing to try would be a factory reset, is that likely to work?
Is there any way to get SMS'es and some game save games off the phone before resetting it?
Thanks for all suggestions!
Well if your PC is not recognizing the phone, then there's not much you can try I guess (other then factory reset.) Maybe someone is gonna come up with something.
Aren't the gamesaves on your sd card?
There have been hardware issues associated with multiple downloads from the market and pulling the battery. This might or might not be the case. However you are covered with warranty in case it is.
Sent from my HTC Desire S using XDA App
esbenm said:
My wife installed some updates in the market and her phone froze on the Sense home screen. Removed the battery, and it now won't boot past the HTC logo.
It is on the factory/default Sense ROM, never rooted or anything, my wife has like 5 apps on it and still the stock Sense wallpaper
It can boot into HBOOT, we tried the recovery option which showed the black screen with phone+green arrow animation for a few seconds. Then very shortly an image with a red arrow, then a reboot and still stuck on the HTC boot screen.
It does not show up in ADB, USB debugging is not on either.
My next thing to try would be a factory reset, is that likely to work?
Is there any way to get SMS'es and some game save games off the phone before resetting it?
Thanks for all suggestions!
Click to expand...
Click to collapse
If she created a HTC Sense account and had set it up to sync then her texts would have been saved online.
If no other options download the corresponding to your region RUU (ROM Update Utility) from here. Then reboot to Bootloader (VOL DOWN + POWER Button). Make sure that you have HTC Sync installed. Go to fastboot screen (you should see FASTBOOT USB line). Start RUU.exe. It will handle everything automatically and hopefully you will have a brand new Stock system again.
If hard resetting dies not work, I'm afraid you may have a fries eMMC chip! It's very common when the phone freezes in maker updates and you pull the battery!
olyloh6696 said:
If hard resetting dies not work, I'm afraid you may have a fries eMMC chip! It's very common when the phone freezes in maker updates and you pull the battery!
Click to expand...
Click to collapse
Sorry to be offensive but stop with this crap it only scares people. I have rescued my phone twice already from the bootloop. The fried eMMC is the last consideration to be made after trying some reasonable solutions.
An boot loop isn't
an real indicator for fried emmc, most of the times you just somehow messed up part of the software or the partitions, this:
http://forum.xda-developers.com/showthread.php?t=1292730 it's an really fried emmc.
Let's try some solutions before destroying any hope!
Swyped from my Desire S
amidabuddha said:
Sorry to be offensive but stop with this crap it only scares people. I have rescued my phone twice already from the bootloop. The fried eMMC is the last consideration to be made after trying some reasonable solutions.
Click to expand...
Click to collapse
I'm not starting with 'crap' I'm simply saying what might be true.
It is well known that after hitting update all in the market, it leads to a fried emmc chip.
I have also been stuck on a bootloop many times (after flashing wrong kernels etc) and had to pull the battery. I also risked a fried emmc chip. I was just lucky I didn't get it fried, and I hope it doesn't happen again! *touch wood*
Sent from my HTC Desire S using xda premium
esbenm said:
My wife installed some updates in the market and her phone froze on the Sense home screen. Removed the battery, and it now won't boot past the HTC logo.
It is on the factory/default Sense ROM, never rooted or anything, my wife has like 5 apps on it and still the stock Sense wallpaper
It can boot into HBOOT, we tried the recovery option which showed the black screen with phone+green arrow animation for a few seconds. Then very shortly an image with a red arrow, then a reboot and still stuck on the HTC boot screen.
It does not show up in ADB, USB debugging is not on either.
My next thing to try would be a factory reset, is that likely to work?
Is there any way to get SMS'es and some game save games off the phone before resetting it?
Thanks for all suggestions!
Click to expand...
Click to collapse
so, have you tried hard reset/factory reset. let us know what happen than. next time never pull out battery when your phone freeze. just press vol up + vol down + power button (all three hardware button) and the phone will restart. I personally had this problem few times and able to recover my device. start with hard reset your phone.
look at ben_pyett signature. you need the adb+fastboot and htc drivers for your windows pc to detect your device. I'm using linux and I don't need those drivers.
olyloh6696 said:
I'm not starting with 'crap' I'm simply saying what might be true.
It is well known that after hitting update all in the market, it leads to a fried emmc chip.
I have also been stuck on a bootloop many times (after flashing wrong kernels etc) and had to pull the battery. I also risked a fried emmc chip. I was just lucky I didn't get it fried, and I hope it doesn't happen again! *touch wood*
Sent from my HTC Desire S using xda premium
Click to expand...
Click to collapse
Ok to be more specific: I have already rescued my phone from a bootloop with all the indications for a "fried eMMC" described in some threads in this forum. Also me and Tectas assisted several people accross the forum these days to revive their phones from the "fried eMMC" (some successful, some not). Anyway all of these users had the info that they eMMC is fried and were terrified. But a Bricked and Fried phone are totally different stuff. So if you post to help is OK, but when you post to scare this isn't.
Update: thanks for all the suggestions. I couldn't get any of it to work, including factory reset.
We are going to send the phone in for a warranty repair, most of her personal stuff is on her Google account or the SD card, so no major problems.
The HTC Sense website with SMS backup never worked for her, there is no option to log in from the phone.
As much as i love Android I am shocked that hitting "update all" in the market and/or pulling the battery can brick a 400 $ phone. Even buggy old Windows ME was fine if you pulled the pover cord.
My iPhone friends will laugh at me well into 2012 if I tell them this.
Do HTC have more faults than other brands? Both our Desires have had trouble. I am about to upgrade mine, maybe should look at another brand?
There is some hope!
amidabuddha said:
Ok to be more specific: I have already rescued my phone from a bootloop with all the indications for a "fried eMMC" described in some threads in this forum. Also me and Tectas assisted several people accross the forum these days to revive their phones from the "fried eMMC" (some successful, some not). Anyway all of these users had the info that they eMMC is fried and were terrified. But a Bricked and Fried phone are totally different stuff. So if you post to help is OK, but when you post to scare this isn't.
Click to expand...
Click to collapse
+1
I'm afraid that I must agree.
In the early days of this problem, I too was probably guilty of announcing too early to users "that's you've fried your eMMC chip - that's a warranty return" where as over time we've now come to believe that this still a chance of hope, albeit not great or guaranteed, but none the less, fortunately several people have managed to recover from this situation, by a variety of means.
So even though the possible outcome might not be likely, I think that we should attempt to always suggest that there might be hope at least until we've tried all the possible solutions and now luckily the various users have compiled guides of the suggested options so this isn't that difficult.
The only time when I'd suggest that a user should probably instantly return a device, is if they are completely non technical or have a brand new device which is still S-ON. In which case they may as well return the device under warranty and get a replacement device or motherboard which will at least contain the non dubious/faulty chip, and will remove the possibility of future occurrence completely - so they'll actually be better off for the future!
esbenm said:
Update: thanks for all the suggestions.
Click to expand...
Click to collapse
Sorry to hear this. You were just unfortunate and what happened to you is rare, also it's not a fault of Android but, a HTC eMMC chip hardware issue caused by a particular dodgy version of the eMMC chip that comes on some of these phones.
I believe that HTC realised the fault and replaced the chip with another make after a fashion. So hopefully you'll get the different chip on your replacement device/motherboard.
I also think that they've changed the market application so that it downloads one application after rather than all the applications together, which was known to cause a device freeze, which often was followed by a battery user battery pull - which then led to this problem.
Next time... Never pull the battery! there are always other options.
Take care and good luck.
Hey guys...As a few of you know, my phone met its demise last night for (seemingly) no reason. I had recently backed up my ROM through Rom Manager and tried out a few themes from the market.
Anyways, when I plugged my phone into my computer, I see that it tried to install some drivers and then I see "QHSUSB_DLOAD" as my phone.
Ive noticed that all TRULY bricked phones (not just the sensation) all have this "QHSUSB_DLOAD" in common. No one has yet to figure out what this is or how to fix this.
Tmobile chalked it up to hardware failure and has a new (likely refurbished ) on its way.
I think we need to figure out what the heck this is. A few mentioned a connection between Rom Manager, CWM, and QHSUSB_DLOAD. I, for one, will make dang sure that Rom Manager stays off my phone...Any other ideas?
Until this is worked out, its VERY likely that rooting COULD randomly cause the dreaded true brick, QHSUSB_DLOAD style.
Matt
Just swayed my decision on wether to root or not.
So does it turn on? You are a bit unclear about your situation. Does it charge, when you charge it. And does the PC recognize it when you connect it to the PC?
Actually this is well documented. You are in Qualcomm high speed USB download mode. It is typically caused by a problem with your processor and or it's software. Either it is crapping out or more likely something corrupted the software, either by flashing a custom kernel that isn't 100% stable with the hardware (since kernel source for this phone is incomplete this IS possible) or it's just bad luck. Voltage tweaks can have a long term detrimental effect on hardware.
Hey guys, it is dead as a door knob.
http://forum.xda-developers.com/showthread.php?t=1321110
That ought to sum things up...
Im sure its bricked...I just want to look more into this as I have yet to find a single case where this was solved. It just gets pushed aside since no one knows.
Behold_this said:
Actually this is well documented. You are in Qualcomm high speed USB download mode. It is typically caused by a problem with your processor and or it's software. Either it crapped out or more likely you corrupted the software, either by flashing a custom kernel that isn't 100% stable with the hardware since kernel source for this phone is incomplete this IS possible. Voltage tweaks can have a long term detrimental effect on hardware.
Click to expand...
Click to collapse
I was using cm7, build 9 and fauxs kernel build 8. I dont do UVing or OVing and have kept the CPU speed to 1.18Ghz.
My computer told me that it failed to install whatever it felt it needed.
So this is known? Am I correct in thinking that this is a 100% brick then, or is there anything, save from tearing it open, that can be done to fix it?
Although I have a new one coming, Id like to get to the bottom of this for everyone else.
Matt
Well, yes...and no. For all intensive purposes it is bricked, however, if it's just software HTC (or anyone with a leaked loader) could recover it easily. If it's hardware then nothing can be done. You can find the Qualcomm drivers online but still need the loader (all I've found are motorola sbf's nothing for HTC). Basically you did the only thing you can at this point, but now you have a little more info on it.
Behold_this said:
Well, yes...and no. For all intensive purposes it is bricked, however, if it's just software HTC (or anyone with a leaked loader) could recover it easily. If it's hardware then nothing can be done. You can find the Qualcomm drivers online but still need the loader (all I've found at motorola sbf's nothing for HTC). Basically you did the only thing you can at this point, but now you have a little more info on it.
Click to expand...
Click to collapse
Someone could get an XDA style Nobel prize for coming out with something that could fix this phone when this happens.
Im guessing that is what a JTAG does? Would be great once warranty time is over!
I am suspicious this could be another build quality issue with HTC...Day one with this phone had the same sort of thing happen, but it eventually booted. Perhaps this was just waiting to happen?
Or, I wonder if it is related to CWM and Rom Manager? This seems to be a RARE occurance considering how many people flash the above mentioned ROM and kernel without this happening. The last thing I did before charging was backing up in Rom Manager.
Jtag is a little extreme as it involves soldering and messing with internal components, plus don't think it's been done on this chip set, but I could be wrong. The ROM is usually less of a concern then custom kernels are. Also ROM manager sucks and many times is very buggy. It is safer to do all those kinds of things through recovery. Uninstall ROM manager and forget it ever existed (just my opinion).
Behold_this said:
Jtag is a little extreme as it involves soldering and messing with internal components, plus don't think it's been done on this chip set, but I could be wrong. The ROM is usually less of a concern then custom kernels are. Also ROM manager sucks and many times is very buggy. It is safer to do all those kinds of things through recovery. Uninstall ROM manager and forget it ever existed (just my opinion).
Click to expand...
Click to collapse
Okay, how about this...I intend to S-off and reinstall CWM the SECOND I get my new phone. LOL...Should I erase my ROMs+kernels from the SD card and start over from scratch, or can I just boot up again like nothing happened?
I guess its safer to start over, huh?
EDIT: I have been reading over stories involving a hard brick and QHSUSB_DLOAD. It seems it ALL came from SD card partitioning in CWM. I was also in recovery that day restoring my ROM when I accidentally touched the screen and the phone rebooted. (After restoring) I thought it was just rebooting recovery. I wonder if something else happened? The phone booted up fine and worked for some time after. The last thing done was charging the phone via wall charger, seeing it was done, and then unplugging.
Matt
it may not be necessary, but I would. I'd just redownload all the software I plan on loading from the start and give it a clean slate, but that's just me. Also be very careful with resorting apps and data since we really don't know the total cause of your issue. All in all you probably won't have to deal with this again as long as you minimize your risk.
nice. maybe there are aliens inside your phone! Just a thought as it seems everyone seems to just turn around when they see this problem. some of the brave ones got taken by the aliens too for snooping out too much
vitusdoom said:
nice. maybe there are aliens inside your phone! Just a thought as it seems everyone seems to just turn around when they see this problem. some of the brave ones got taken by the aliens too for snooping out too much
Click to expand...
Click to collapse
Im the alien!
Yea, I never saw this happening to me. I read carefully before I do anything and have never tried anything fancy.
Im guessing that QHSUSB_DLOAD lets you know the phone is fully erased and waiting for something to be flashed the elite way? (From the factory via their gadgets). To date, NO ONE has recovered from this.
Man Id love to be the one to recover! I crapped myself when I saw QHSUSB_DLOAD mentioned on my computer. Its the kiss of death.
I also have to wait till next week to get my replacement despite me opting for the fastest most $$$ method of shipping. UPS Express is the fastest and will take till monday (which means tuesday since no one will be around to sign for it).
Ugg..
Matt
Doh! that just sucks Matt. but then again, thats way better than having some hardware issue and being fixed (anything with hardware issue fixed surely ends up going back to the guys that fixed it. they seem to put some time bomb in there so you'll go back crying to fix it again and again. lol) haven't had this issue ever since.(was flashing my phones way back then) maybe im just lucky. hopefully i will not encounter this. (the only thing I bricked was my brand new PSP2002. just bought it from US and im way over in NZ mate - didn't have a option to return it. )
where does this QHSUSB_DLOAD appear? would this come up when you turn the device on? because i've seen some devices that are bricked, they just lit up and goes off and never charges and can't go to bootloader. thinking this is 100% bricked or this QHSUSB thingy is the pure brick?
vitusdoom said:
Doh! that just sucks Matt. but then again, thats way better than having some hardware issue and being fixed (anything with hardware issue fixed surely ends up going back to the guys that fixed it. they seem to put some time bomb in there so you'll go back crying to fix it again and again. lol) haven't had this issue ever since.(was flashing my phones way back then) maybe im just lucky. hopefully i will not encounter this. (the only thing I bricked was my brand new PSP2002. just bought it from US and im way over in NZ mate - didn't have a option to return it. )
where does this QHSUSB_DLOAD appear? would this come up when you turn the device on? because i've seen some devices that are bricked, they just lit up and goes off and never charges and can't go to bootloader. thinking this is 100% bricked or this QHSUSB thingy is the pure brick?
Click to expand...
Click to collapse
The message QHSUSB_DLOAD appears the first time I tried to connect via USB to my computer. It showed up on my computer down where usb notifications occur. After it told me it couldnt install hardware, that was it. No more action from either the phone or the computer. Its like the world just passed right by my poor phone.
Maybe I will get lucky and get a phone free of dust as well! I was waiting on calling in that care package for later...Oh well.
Matt
Oooh nice! so the device really has a black screen and that message appeared on driver installation on you computer.
most of the people in the net just mentions that this driver is missing. If the driver is missing, maybe it did really get corrupted(software because of rom-manager not pointing to this ) but yeah, could also be hardware failure. did it say on your computer that it was installing some drivers for that QHSUSB_DLOAD? and it failed? what about HTC? did you see anything from HTC about this?
vitusdoom said:
The message QHSUSB_DLOAD appears the first time I tried to connect via USB to my computer. It showed up on my computer down where usb notifications occur. After it told me it couldnt install hardware, that was it. No more action from either the phone or the computer. Its like the world just passed right by my poor phone
Click to expand...
Click to collapse
this is the EXACT problem im having! on my tmobile SGS2
not sure if this has already been mentioned but what do you guys think of this?
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-ii-jtag-brick-repair/
Hey guys,
I'm in the same situation too.... I've been flashing hundreds of roms and all kind of software on a lot of different android phones...but this is the first time ever I came across something like that where I feel that this is the end of it!!!! I made a mistake...by not paying attention flashing an HD2 rom to my sensation!!! You know some time s**t happens... and here we go...I got a completely dead bricked sensation with nothing i can do, even I've been searching and reading for 2 days with no luck what so ever...so I guess no one is able to find a solution for this issue yet!!!!Which is too bad: confused: .I wish I was able to find some solution to this problem so I can get my phone back to life and help every one else who might end up with this issue. Because I think a lot of people might be in this situation!!!. I tried every thing I can possibly do with m y knowledge and the results was all dead ends. I just hope that this issue will be taken to the next level by some one...like all the other phones that it can be unbricked...so why not the sensation!!!?. Any one can come up with and ideas for this please help us as a community to get pass by this dead end on our Htc sensations.
Guys i have absolutely same problem with my sensation, i believe there must be a way how to bring our phones back to life. Im sure that on my phone its just software problem caused by backing to s-on(got bricked right after adb rebootbootloader). So if some1 find out how to unbrick, PLEASE post it. I dont want to solve it by warrany, because its little far for me :-(