can somebody help me update my t-Mobile XDA? i messed up my phone once already and know i keep getting error 112 during first step in update. CE Erase fails according to the log. Something is clearly locked, but I don't know what i am doing wrong or forgetting. I don't think t-mobile will restore my phone a second time. please help. I have tried diamondv1.2, wm2005, wm2003se, nothing seems to work.
UPDATE: sorry wrong categorie
not sure if that last big is a signature or a real confusement if so then
you cant use rom from one device on another so i would make pretty damm sure which device i had before trying to flash in worst case you can ruin the device 100%
i checked the requirements, so that should be ok. i just keep getting that same error 112, like something is locked. i haven't been able to find out what the error means. any tips?
and the update software i used checks if the device is right...
perhaps some more details:
if i connect it to my charger it will say serial, unless i pull the plug out a bit, then it will say usb.
if i connect to my pc via usb it will say usb v1.00, but after a while this will disappear and the RED light will go on
I have tried flashing it, but since activesync does not see it as a pocketpc anymore, i can't flash.
i have read a 100 posts by now, but i have not found any solutions.
Hi there,
i cant upgrade my phone. i get an error 264.
i even hardresetted the phone and tryed.
when i start the "hardspl.bat" my mobile wants to run a jumper file. but when i press yes the screen turns white the connection brakes and i cant upgrade too.
and when i dont press yes and do nothing the updater starts but its stock at 0% and after some time i get the error o0
what have i done wrong ?
greetings
sluppy
same thing happens here, my usb connection losts while whitescreen loaded, i will try with another computer tomorrow...
by the way bootloader way doenst work, i have tryed several times, several roms, it has just come back from service due to speaker problem...
G4
OS 2.20.7.34
Qtek s200
so i can get into the 3 colored screen if i dont press yes when i am asked if i want so start the jumperspl. if i dont press anything the screen gets into 3 colors. but i get an error on the PC and i can do anything. but it seems that the usb connection is still running.
sluppy said:
so i can get into the 3 colored screen if i dont press yes when i am asked if i want so start the jumperspl. if i dont press anything the screen gets into 3 colors. but i get an error on the PC and i can do anything. but it seems that the usb connection is still running.
Click to expand...
Click to collapse
Please read the thread in my signature...
be patient ~~~ only less than half an hour to complete flashing........
download all needed files first~~~~
What is yr PC oS
I have d same error in win XP and Vista.
Try use win 2000.
I solved my using win2000.
its just not working! i copied the jumperfiles, i plugged the phrophet i run the spl i plugged the propeht in again and when i run the update thing i get an error.
it is me again
it has done today, i hav triyed again with my old notebook at work today and it's succeded, it think my home computer's mainboard have a sumething like usb connection problem.
I will try later with rear USB ports
i tryed it on a nother maschine and its not working. same error. and i 100% did whats described in the threats! every available method
sluppy said:
i tryed it on a nother maschine and its not working. same error. and i 100% did whats described in the threats! every available method
Click to expand...
Click to collapse
not about PCs, read again my thread ... is that you have a G4 device?
go to my signature again. Many successful cases.....................
yes its a g4 and i read ure thread. and tryed it serveal times. but its just not working
sluppy said:
yes its a g4 and i read ure thread. and tryed it serveal times. but its just not working
Click to expand...
Click to collapse
read more
http://forum.xda-developers.com/showpost.php?p=1937273&postcount=103
okay i think i found the error ... i had windows runnin on my mac with a virtuall mashine and it wasnt able to connect virtual windows with the bootloader.
but i got an other error now. if i run hardspl, i everything seems to run find. but its still the old 2.15 hard spl on the prophet even if its supposed to be a 2.20.
do i have to crack some kind of romlock befor? (its a german o2 XDA)
oh okay do i have to unlock the CID? i searched the prophet forum but didnt find anything specific.
-> http://wiki.xda-developers.com/index.php?pagename=Prophet_CID_Unlock is G4 only :/
Hey guys,
i had the same error and i tried just the same one more time, so romupdateutility.exe and it worked!!
error codes and its definition
this might help to define those error codes... got it in one of the files i downloaded from this forum...
sometimes README helps )
Hey guys, I am trying to flash Dutty's newest rom, but im having some trouble...
When I double click the RUU.exe file, I put a check in the checkbox, hit continue. then put another check, hit continue, then I get an error saying:
"Error [200]: Invalid update tool"
"Please get newer update utility"
This is odd because I read on the Wikki that you get this error if you don't have HardSPL, but I do. In fact, I have flashed at least 4 or 5 different roms on this phone. Another thing is that my phone isnt in activesync mode, and for some reason when I try to install activesync (directly from microsoft's website and from the CD that came with my tilt) I get an error saying that it wont install... And another weird thing is that this never stopped it before, I have flashed a rom without it being in activesync with the computer...
When I tried to install Microsoft's activesync directly from their website, I double click the setup.msi file, and then it says :
"preparing installation..."
"The wizard was interrupted before Microsoft ActiveSync 4.5 could be completely installed.
Your system has not been modified. To complete installation at another time, please run setup again.
Click Finish to exit the wizard"
And this happens every time I try it... I have tried redownloading the file and I get the same issue... I even checked to see if maybe I downloaded the wrong version (like the vista version or something) but I downloaded the correct one.
Now, when I try to install activesync from the CD that came with my Tilt, I get an error saying that I need to update my Adobe Flash Player, So i click on the link that it gives me, and I updated it. Even though it is currently up to date, I STILL get this error every time I try, even after restarting my computer.
Any ideas?
put the phone in bootloader and tell me exactly what it says there.
jjb007 said:
Hey guys, I am trying to flash Dutty's newest rom, but im having some trouble...
When I double click the RUU.exe file, I put a check in the checkbox, hit continue. then put another check, hit continue, then I get an error saying:
"Error [200]: Invalid update tool"
"Please get newer update utility"
This is odd because I read on the Wikki that you get this error if you don't have HardSPL, but I do. In fact, I have flashed at least 4 or 5 different roms on this phone. Another thing is that my phone isnt in activesync mode, and for some reason when I try to install activesync (directly from microsoft's website and from the CD that came with my tilt) I get an error saying that it wont install... And another weird thing is that this never stopped it before, I have flashed a rom without it being in activesync with the computer...
When I tried to install Microsoft's activesync directly from their website, I double click the setup.msi file, and then it says :
"preparing installation..."
"The wizard was interrupted before Microsoft ActiveSync 4.5 could be completely installed.
Your system has not been modified. To complete installation at another time, please run setup again.
Click Finish to exit the wizard"
And this happens every time I try it... I have tried redownloading the file and I get the same issue... I even checked to see if maybe I downloaded the wrong version (like the vista version or something) but I downloaded the correct one.
Now, when I try to install activesync from the CD that came with my Tilt, I get an error saying that I need to update my Adobe Flash Player, So i click on the link that it gives me, and I updated it. Even though it is currently up to date, I STILL get this error every time I try, even after restarting my computer.
Any ideas?
Click to expand...
Click to collapse
I can't help with the active sync problem (you don't have vista, do you?) but as for flashing...flash from the sd card http://forum.xda-developers.com/showthread.php?t=336158
P1Tater said:
put the phone in bootloader and tell me exactly what it says there.
Click to expand...
Click to collapse
excuse my noobness , but im not sure what that means
jjb007 said:
excuse my noobness , but im not sure what that means
Click to expand...
Click to collapse
OK, with the phone powered on, press and hold the camera button and insert the stylus in the reset hole until the tri-colored screen comes up. This is bootloader. Tell me what it says there, exactly.
jjb007 said:
excuse my noobness , but im not sure what that means
Click to expand...
Click to collapse
After you put your phone in bootloader mode as P1 said, you will see something like this:
KAIS1*0
SPL-1.93.0000
CPLD-8
Once you make a record of what is displayed, reply back with it.
ok, this is what it says (in the top red box):
KAIS1* MFG
SPL-1.0.OliPof
CPLD-8
Then in the white box it says: "Serial"
jjb007 said:
ok, this is what it says (in the top red box):
KAIS1* MFG
SPL-1.0.OliPof
CPLD-8
Then in the white box it says: "Serial"
Click to expand...
Click to collapse
Since you already have it in the boot loader just keep it there and try to flash it, see if you get any errors that way.
What version of Windows is on your computer?
If your running vista you need the mobile device center, not activesync.
Im using windows XP, I will try flashing while it is in bootloader, I edit my post once I see if it is successful or not.
**It did not work when I tried flashing from the bootloader screen, I got the same error
which rom are you flashing your device with?
I am trying to flash Dutty's newest ROM, and right now Dutty's 3rd or 4th newest one is on my phone.
after you put your device in bootloader, and connected it to the pc, did the word "serial" change to "usb"? and were drivers loaded for the device? there should be a htc usb sync or microsoft usb sync in your device manager
XtreMe_G said:
after you put your device in bootloader, and connected it to the pc, did the word "serial" change to "usb"? and were drivers loaded for the device? there should be a htc usb sync or microsoft usb sync in your device manager
Click to expand...
Click to collapse
Yea, I dont see either of those in my device manager...
Sounds like you're missing the drivers. Need to roll 'em back to the XP drivers.
GSLEON3 said:
Sounds like you're missing the drivers. Need to roll 'em back to the XP drivers.
Click to expand...
Click to collapse
Alrighty... so how do I go about doing that?
jjb007 said:
Alrighty... so how do I go about doing that?
Click to expand...
Click to collapse
You use google or XDA search via google. Try ROM flashing with Vista, etc...
Remember, there is a lot of valid data in Hermes forum as well
jjb, I had the same problem the other night on my home computer with XP. Luckily, I did not have the same problem with my work computer, also with xp. Something happended on the home computer to fcuk up the drivers (i'm guessing, as GSLEON pointed out). I had the same install issues with Activestinc. I had these issues in the past (at least 6 months ago) and was able to finally get Activestinc installed after rebooting multiple times. This time I only tried once before I waited to go back to the office and flash. I'm not sure what to do to rebuild(?) the drivers, but you might try a different computer. Also, my google search (for the 200 error) the other night pulled up a different web site that listed a lot of error codes and what they mean. I'm gonna try and figure out my driver issues with activstinc this weekend and I will post if successful.
ptgptg said:
jjb, I had the same problem the other night on my home computer with XP. Luckily, I did not have the same problem with my work computer, also with xp. Something happended on the home computer to fcuk up the drivers (i'm guessing, as GSLEON pointed out). I had the same install issues with Activestinc. I had these issues in the past (at least 6 months ago) and was able to finally get Activestinc installed after rebooting multiple times. This time I only tried once before I waited to go back to the office and flash. I'm not sure what to do to rebuild(?) the drivers, but you might try a different computer. Also, my google search (for the 200 error) the other night pulled up a different web site that listed a lot of error codes and what they mean. I'm gonna try and figure out my driver issues with activstinc this weekend and I will post if successful.
Click to expand...
Click to collapse
Thanks for the input... im going to try re-installing windows when I get the chance and hopefully that will clear up this driver issue.
rather than going through all the trouble trying to solve this problem, i would just flash using the microsd card
Ok so I decided to restart my phone and im now stuck at the boot screen says
Kais1*0
SPL-3.56.Hard
CPLD-8
Went to the help thread everytime I try to do anything I get a error 260 or connection any suggestions or am I done for?
Run the stock ROM that came with the device while in boot loader mode. You could have easily found that out by doing a simple search
You are done for it.
Read the stickies...
*Hint: the one about been stuck at the bootloader
Dave
I have tried all the steps in the sticky the phone will change from saying serial to usb but my pc wont reconize it itll say usb device not reconized and then say your new hardware may not work and when i run the stock roms like i said ill just get error 260 connection problems.
g2lambo said:
I have tried all the steps in the sticky the phone will change from saying serial to usb but my pc wont reconize it itll say usb device not reconized and then say your new hardware may not work and when i run the stock roms like i said ill just get error 260 connection problems.
Click to expand...
Click to collapse
Hmmm,
Error 260 can usually be resolved by reseting your device and/or computer.
Has you PC been rebooted latley, it might help?
Dave
Yes but I also am running a hacked up xp iso with sp3 installed ill try today at school where they dont run os's like mine i guess hopefully i will get it working im guessing at&t wont give me a new one will they haha
g2lambo said:
Yes but I also am running a hacked up xp iso with sp3 installed ill try today at school where they dont run os's like mine i guess hopefully i will get it working im guessing at&t wont give me a new one will they haha
Click to expand...
Click to collapse
No need for this thread to continue.
If you continue to have a problem please post in the thread about Stuck in bootloader.
Help! Seven-Eighter Program Error, "Restarting your phone...Error. Timeout occured
So I have a Samsung Focus that I tried to install windows phone 7.8 and it was going through the update until I got this error message, "Restarting your phone... Error. Timeout occurred while waiting for device to reboot." Should I unplug because the device has the picture of plugging the phone into the computer image on it. THanks
I unplugged the phone, and tried to install it again. I got another error code twice. Now the phone is not being recognized by Zune or by the USB port, any tips on what I can do?
So the phone worked, I keep trying to make it work with the update tool but it seems that an error code keep happens.
Ok the only thing I can think of is that you haven't installed the exact same language files that were originally on the device before you attempted the update, It wont work unless they are the same :fingers-crossed:
after MANY error codes I was finally able to install wp 7.8 on my Samsung focus. I keep getting some error, I helped a friend through Skype, but finaly worked through trial and error.