Database Info

[Q] Modding From A to B Guide?

Sorry to sound pig ignorant about phones but I am ... my expertise is in PCs. So anyway I want to upgrade the Hero with CyanogenMod.
I backed up my contacts, apps, etc and rooted the phone with unrevoked ... lost everything in memory in the process, but that's OK -- the important stuff is backed up.
Rebooted into stock 21. ROM and skipped all the new user stuff ...
OK, here's where I'm lost ... to load the CyanogenMod ROM I apparently need something like Amon-RA, but to load Amon-RA image file I need to install the SDK pack.
So I downloaded the SDK pack, but it is nothing like what is described in all the install SDK posts I've been able to find. What I have found are instructions about running ASroot and other files that don't exist in the SDK version I have.
So like what do I do now, more important ... is there an A to B thread for doing this mod starting from a stock phone, going to unlocking, than loading SDK, than installing Amon-RA (or equivalent) and than installing CyanogenMOD.
I know all this info is out there, but it seems like most of the files I've found don't interface well in the sense that the ones that talk about doing step one aren't terribly relevant to ones that talk about step 2, etc.
Thanks

Yes. Its a sticky at the top of the page. Search "guides" lol...
Sent from my HERO200 using XDA App

All you need to do with the sdk is download it and extract it. I just put it in the root of my C: drive. Then open a cmd prompt in windows by going to Start > Run > cmd (press enter). Then in the command prompt you need to change directories to the sdk folder you extracted. For example, mine is in C:\android-sdk-windows. I just type "cd c:\android-sdk-windows" then "cd tools" to get into the directory where you can run the adb program. Make sure your phone is in debugging mode by going to settings > applications > development > check the USB Debugging box. Then you can hook the phone up to the usb and run the command "adb devices". If everything is working correctly then you should see a device serial number show up. If that doesn't work make sure you have the htc drivers installed by downloading htc sync from their website and installing it.
Once adb can see the phone then you should run the command "adb shell" and then when you get a $ prompt type su in order to elevate to root. Make sure you put a recovery image on the phones sd card using step 4 from this guide: http://forum.xda-developers.com/showthread.php?t=694572 I think he has a link to download the recovery in that guide but just in case here is a direct download link for the recovery: http://www.androidspin.com/downloads.php?dir=amon_ra/RECOVERY/&file=recovery-RA-heroc-v1.6.2.img Feel free to rename it to recovery.img so that the commands in the guide can be used as is.
Now you should be able to start at step nine from the guide in that thread (you should be in an adb shell when you start). It should be the adb command to flash a recovery image. Once you do that installing roms is as simple as putting them on your sd card and booting into recovery to select the flash option.

2 questions about adb

1. When using adb should my zoom be turned on or off.
2. Do I type commands in the windows cmd or the one that opens up with sdk.
Sorry if these seem dumb questions
HTC wildfire cyanogenmod nightly
hboot -1.01 s-off xtc clip

Assuming that your Android SDK is in the default location, type these commands. Text inside brackets are like pressing the key itself.
Code:
[Windows] + [R]
cmd
[Enter]
Command prompt will display "C:\Users\{username}>
Code:
cd \
cd "Program Files (x86)\Android\android-sdk\platform-tools"
adb devices
Command prompt should show a list of attached devices. If not, you should see why not!
From here you can issue your adb commands. To get to a command prompt on your phone type "adb shell". You should hit [Ctrl]+[C] to leave the Android shell.

banny7000 said:
1. When using adb should my zoom be turned on or off.
2. Do I type commands in the windows cmd or the one that opens up with sdk.
Sorry if these seem dumb questions
HTC wildfire cyanogenmod nightly
hboot -1.01 s-off xtc clip
Click to expand...
Click to collapse
Regarding your first question, Xoom needs to be on and in usb debugging mode.

Thanks
HTC wildfire cyanogenmod nightly
hboot -1.01 s-off xtc clip

[Q] SuperCID problem

i wanted to flash the new firmware onto my phone so i could flash ics, but one of the requirements is to have superCID.
ive been following this guide: http://forum.xda-developers.com/showthread.php?t=1192300
But, everytime i get to the command, "fastboot oem writecid 11111111" it only gives me a message saying, 'fastboot' is not recognized as internal or external command, operable program batch file.
is there anything i may have missed? ive tried starting over thinking i may have written a command wrong but it still wont work.
thanks in advance guys

Is fastboot present in your sdk installation? If I remember well it should be in "tools" folder of the SDK files.
Try to update your packages through SDK manager.

Re-download, the fastboot package and then unzip...
Open the folder where you see a file called Fastboot.exe
Right click anywhere while holding shift button and press open command here...
Then type that command which you want for CiD
Don't frget to thanx if it works
Sent from my HTC Sensation 4G using XDA App

thanks guys
it turns out that fastboot wasnt in my adb folder but was in my android sdk folder, so i just copied and pasted it into the adb file and tried again, this time it works. thanks guys now onto flashing the new firmware

[S-Off] and Device Offline for PJ831000

This was answered a little bit in the S-Off thread and I would like to post it for everyone that has the PJ8310000 device and they are running into device "offline" when using adb devices. This is for Windows 8 only. I had the same problem in OSX, but I believe the solution is the same. I cannot post in the thread in the developer section yet, that is why this is here.
First, if you can't see your device in your device manager, make sure you have the latest HTC Device drivers installed or install the latest version of HTC Sync. This is very important for Windows 8.
Second, you will need to download and install the latest Android SDK. Just "Download From Other Platforms" and choose the appropriate SDK installation. You will need to run the SDK Manager.exe to install the latest tools. Note: ADB and Fastboot have been moved from the "tools" folder to "platform-tools".
Make sure your phone is in debugging mode by going into the Developer Options and choosing "Android debugging."
Find your SDK installation and make sure you are under "platform-tools" folder. You can ctrl-shift-right click on that folder to open a command prompt at that folder location. Saves you time.
Type in the command prompt:
Code:
adb devices
Your device should be listed and probably says Offline. This is normal. Take a look at your phone, you should get a prompt on your phone asking you if you trust the device that is trying to connect to it (this should be your computer). Allow it.
Type in the command prompt:
Code:
adb devices
This time, your device should be listed with the word "device" instead of offline.
To restart the daemon, type the following separately:
Code:
adb kill-server
adb start-server
This is the best I can do for everyone and it solved my problems with no further issues. I am not an expert and this is the only solution that has worked for me.

Thanks, this worked for me.

I did this in Windows 7 SP1 no problem. All I had to so was get the latest Android SDK and replace all the adb/fastboot files I already had and it worked no problems.
If you get permission denied when doing the last "adb shell" command, get adbd insecure from the forums here and run debugging mode insecurely from there.
Sent from my One X using xda app-developers app

Desertman123 said:
If you get permission denied when doing the last "adb shell" command, get adbd insecure from the forums here and run debugging mode insecurely from there.
Click to expand...
Click to collapse
I had this problem because SU was only allowing apps in CM10.1 (4.2.1). I found the solution by enabling the Dev Options via multiple clicks on the Build number until dev options was enabled, then changed Root access to Apps adn ADB.
FYI for anyone else that gets lost like I was.

ok so i can s-off now?

yes get some, 9 steps to s0ff

Ponarona said:
ok so i can s-off now?
Click to expand...
Click to collapse
Yes, you can use the HTC One XL link in the S-Off thread with no issues. I made this to help people with Win8 and trying to get their phones to appear properly in their device manager and to list it under adb devices.

If you get device offline, my issue, I was running android 4.2.2 but had an outdated adb. Just update adb if you still have problems

I know this is exceedingly random, but if you run a mac and can't see your device in adb, and in the past you tried sharing your phone internet with your mac via usb try running this:
sudo kextunload /System/Library/Extensions/EasyTetherUSBEthernet.kext
./adb kill-server
I need to do that before every adb session.
I'd be amazed someone actually has those conditions, but hey, it might help someone.
Sent from my HTC One X using xda app-developers app

[how to] remove your "tampered" banner

*this thread is for E8. it will NOT work on m7(or anything older). search your device general forum for a specific thread
if you have recently s-off'ed using an exploit that did not remove your tampered banner from the bootloader screen,then this thread is for you.
*note: if you are on hboot 3.19.0.0000 this thread will change software status: modified banner to: software status: official. to my knowledge,this banner is not completely removable (more info)
you do NOT need to downgrade your hboot. this simple adb command works without any scary hboot downgrades.
*you must be s off.
*you must have superuser installed
read this:
this will not work if your s on
the usual disclaimers:
i have tested this my my m8_ul t mobile variant,but use this info at your own risk. if it melts your phone into a little pile of aluminum goo,its not my fault.
credits
-beaups for schooling me on echo command protocol
-andybones for testing it on m7_wlv
-WorldIRC and brar.arsh for testing on m8
-ian.anindya and a couple others have provided dumps. let me know and ill add you to the credits. if someone wants to provide screen shots,i can add those as well.
IF you are an advanced user with adb/fastboot set up and some basic knowlede of the cmd window,you can skip to #2
1)set up adb(windows 7 and lower)
-download this file
-install drivers: if you have htc sync installed,you should allready have drivers. if not,you can install htc sync,or install these modified htc drivers from revolutionary (driver mirror)
-unzip your miniadb_v1031.zip file. this is native funtionality in windows 7. you otherwise may need a utility such as "7-zip" to extract,or unzip it. place the unzipped folder onto the root of your C drive on your PC. root means the top level,not inside any folders. so just copy and paste,or drag and drop the folder onto C with everything else that is there. you may want to rename it to "miniadb_m7" since youll be putting some device specific files in here.
-open a command window. on windows 7,click the start bubble in the lower left and type "command" in the search box. xp i believe is similar or the same. doing this should open a small black command window.
-change to your miniadb_m7 directory. type the following at the prompt in your cmd window:
cd c:\miniadb_m7
your command promt should change to "c:miniadb_m7>" provided you: 1)unzipped the miniadb_v1031 zip file,and 2)put the folder on your c drive,and 3)entered the name of the folder correctly ("miniadb_m7" in this case)
-now make sure usb debugging is checked in developer options(you will need to turn it on first),and plug your phone into your PC with a usb cable
-make sure your phone is being recognized- type:
adb devices
if your drivers are installed correctly,this should return your phones serial number. you should hear the "found device" noises when you plug your phone in. if it starts installing drivers,wait for it to finish before typing the adb devices command.
if you get your serial number back,then enter this command:
adb reboot bootloader
this should take your phone to the "fastboot" screen,wich is white with colored letters. this is one mode of your bootloaders interactive modes. at the top youll see fastboot devices as confirmation youre in fastboot.
now enter:
fastboot devices
again,this should return your phones serial number. you should hear the "found device" noises when you plug your phone in. if it starts installing drivers,wait for it to finish before typing the adb devices command.
if you get your serial number back,you can enter the following to boot back to the phones OS:
fastboot reboot
and now,youve installed adb/fastboot and tested youre phones drivers. if at either spot,you have trouble and dont get your serial number back,there is some sort of connection issue. use these steps to troubleshoot:
troubleshooting connectivity issues:
-try a reboot of the PC
-try different usb cables and ports
-dont use a usb hub
-dont use usb 3.0
-make sure nothing capable of comunicating with the phone is enabled and running. htc sync,pdanet,easy tether,and even itunes have all been known to cause issues.
-windows 8 has been known to have issues. try a windows 7 or older machine
failing the above,
-i use these drivers for fastboot and adb(donwload and run as admin): http://downloads.unrevoked.com/HTCDriver3.0.0.007.exe (mirror)
failing that,try manually updating the drivers in the following manner:
-put the phone in fastboot mode(select fastboot from the hboot menu)
-open device manager on the PC
-plug in phone,watch for it to pop up in device manager.
-update drivers with device manager,pointing the wizard to the extracted
driver download folder from above
note that you can check the connectivity of the phone,and make sure drivers are working by in the following manner:
-open cmd window. change to directory containing adb/fastboot utilities
-adb with the phone in the booted OS,usb debug enabled,enter:
adb devices in a cmd window
-fastboot with phone in fastboot,enter:
fastboot devices in cmd window
in either case,a properly connected phone with working drivers installed should report back the phones serial number.
Click to expand...
Click to collapse
this process,in your cmd window,should look something like this:
Code:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\Scott>[COLOR="red"]cd c:\miniadb_m7[/COLOR]
c:\miniadb_m7>adb devices
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
FAxxxxxxxxxx device
c:\miniadb_m7>[COLOR="red"]adb reboot bootloader[/COLOR]
c:\miniadb_m7>[COLOR="red"]fastboot devices[/COLOR]
FAxxxxxxxxxx fastboot
c:\miniadb_m7>[COLOR="red"]fastboot reboot[/COLOR]
rebooting...
finished. total time: 0.037s
c:\miniadb_m7>
2)reset your "tampered flag"
enter the following:
adb devices
adb shell
su (if needed to get a # prompt)
echo -ne '\x00' | dd of=/dev/block/mmcblk0p6 bs=1 seek=5314564
(i would very strongly recomend you copy/paste this)
exit
(exit a second time if you need to to get back to a normal > prompt)
adb reboot bootloader
verify tamered is gone
your cmd window should look something(but not exactly) like this(red= my inputs,blue=additional comments):
Code:
c:\miniadb_m8>[COLOR="Red"]adb shell[/COLOR]
[email protected]_m8:/ $ su
su
[email protected]_m8:/ # [COLOR="red"]echo -ne '\x00' | dd of=/dev/block/mmcblk0p6 bs=1 seek=5314564[/COLOR]
ock/mmcblk0p6 bs=1 seek=5314564 <
1+0 records in [COLOR="Blue"][COLOR="red"]adb reboot bootloader[/COLOR]
c:\miniadb_m8>[COLOR="red"]fastboot reboot[/COLOR]
rebooting...
finished. total time: 0.022s
c:\miniadb_m8>
other useful threads:
lock/unlock without htcdev:
change mid without eng hboot: http://forum.xda-developers.com/one-e8/general/how-to-change-mid-eng-bootloader-t3019148
if this does not work for you
*first reread this thread in its entirety. make sure you have met the prerequisites,and double check your code and make sure you have not forgotten a step,or screwed something up trying to type it (especially if using a terminal emulator),and check that you have not gotten any errors.
if youre still confident you did things correctly,you need to PM me:
1)the results of: fastboot getvar all
2)a link to an uploaded p6.
you get fastboot getvar all by:
-place phone in fastboot
-enter in fastboot getvar all right click,click mark,highlight in white,hit enter or right click to copy
you dump p6 by:
adb shell
su (if needed to get a #)
dd if=/dev/block/mmcblk0p6 of=/sdcard/mmcblk0p6
transfer the file on internal storage to your pc and upload it
im not trying to be a ****,but its not helpful to post "didnt work" if you screwed something up,or if your not willing to help find a solution. especially if others have found it to work on their same variant.
important:
from now on,i will need a copy of your cmd window as well if we want to get to the bottom of whats happening. some folks seem to be simply writing extra bytes,wich is screwing up the flag location. please make sure this shows an entire session,not just a last part where it looks correct. we cant figure it out if you only show part of what you did.

mine

Working like a Bomb

Many thanks. Works like a charm.

thank you sir, it works on M8Sd MEC_DWGL :good:

Works on the M8sd Indian version HBOOT 3.19.0.0000
Sent from my HTC One_E8 dual sim

how can we remove tampered banner when device is s-on please help me

eminteoman said:
how can we remove tampered banner when device is s-on please help me
Click to expand...
Click to collapse
The only way is to run a signed ruu that meets all the phone's s on criteria

scotty1223 said:
The only way is to run a signed ruu that meets all the phone's s on criteria
Click to expand...
Click to collapse
Can you explain a little further? I really couldn't understand

eminteoman said:
Can you explain a little further? I really couldn't understand
Click to expand...
Click to collapse
Easy way: s-on can't get rid of the text
Send via my CM 12 Gtab3

wildanw2 said:
thank you sir, it works on M8Sd MEC_DWGL :good:
Click to expand...
Click to collapse
Does it works on m8sx??