[bootanimation] Infuse - Accept No Substitutes boot animation - Samsung Infuse 4G

Hi, all. I wanted to create my own boot animation so I've been tinkering around with it and wanted to post to get some feedback. It's nothing fancy, and I've only tested on Serendipity VII, but if you'd like to give it a go I've included the zip file.
I've attached a preview as well (can't post links yet). It's not quite as slow as the gif file, but that was the easiest way for me to get a preview of it.
Any and all feedback is appreciated. Like I said, I made this for myself, but wanted to share with this awesome community.
Installation Instructions:
1. Place bootanimation.zip on your sdcard
2. Using a root explorer, mount your system as r/w
3. Move or copy bootanimation.zip to system/media (rename to sanim.zip if on a non-Hellraiser ROM)
4. Reboot
*I would suggest making a backup of your current bootanimation.zip file in case this does not work with your current ROM

Excuse my ignorance but how do you install this animation? CWM? Copy/Paste? How do you enable it? I am running Infused 2.1.0 and have the stock animation while booting and would love to use this one.

Blackberrynomore said:
Excuse my ignorance but how do you install this animation? CWM? Copy/Paste? How do you enable it? I am running Infused 2.1.0 and have the stock animation while booting and would love to use this one.
Click to expand...
Click to collapse
Both ways are possible and I see the OP does not state the way.
It won't hurt to try flashing with cwm.... If it's not cwm compatible it just won't work....
And if it does not work then just push it to your system using a root explorer....
Sent from my Samsung Infuse 4G

Blackberrynomore said:
Excuse my ignorance but how do you install this animation? CWM? Copy/Paste? How do you enable it? I am running Infused 2.1.0 and have the stock animation while booting and would love to use this one.
Click to expand...
Click to collapse
Your kernel needs to support alternate bootanimations and if rooted make the system/media dir. Read/Write accessible then you can copy and paste the zip to that dir. Now depending on the kernel you may need to rename the file to something like sanim.zip like with the latest infusion 1.1 kernel.

Apologies for not posting installation instructions. Updating OP with the method I used.

Nice. I really like it. Could you make one that just says INFUSE? Keep up the good work.

bigfau said:
Nice. I really like it. Could you make one that just says INFUSE? Keep up the good work.
Click to expand...
Click to collapse
Thanks! Be happy to make you one. Same animation, just take off "Accept No Substitutes"?

Yes, please kind sir. I have the one on now. Loving it.

You can try this one out. Removed "Accept No Substitutes".
*Edit*
The attached file is incorrect and still has "Accept No Substitutes". If you would like one without, please see post #16.
http://forum.xda-developers.com/showpost.php?p=17206296&postcount=16

You must make more and more and more

Works Great keep up the good work!!!!!

Thank you! Curious.. which ROM are you guys using? Wanting to see if this works on other ROMs since I tested with Serendipity VII.

wikedawsum said:
Thank you! Curious.. which ROM are you guys using? Wanting to see if this works on other ROMs since I tested with Serendipity VII.
Click to expand...
Click to collapse
Running Hellraiser B6 with JVQ Dlev's ROMDlev 4.2 and Infusion GB 1.1 kernel.

I'm running infused 2.1 with infusion 1.1 kernal. Using transfuzion theme.
Sent from my SAMSUNG-SGH-I997 using xda premium

Running 2.1.0 Infused
I downloaded the second one but still see. The accept no sub.
Cranky...

Truckerglenn said:
Running 2.1.0 Infused
I downloaded the second one but still see. The accept no sub.
Cranky...
Click to expand...
Click to collapse
You're right, it did. Apologize for that. Please try the one attached now.

Fantastic

Thank you
this is absolutely amazing, but how do you make them? i would love to try making some different ones

angry6 said:
this is absolutely amazing, but how do you make them? i would love to try making some different ones
Click to expand...
Click to collapse
I followed this tutorial here: http://forum.xda-developers.com/showthread.php?t=1096068
There's also a tool to help you make them here: http://forum.xda-developers.com/showthread.php?p=17011722
I've only been able to get the tool to work if I have part0 and part1 folders (the tutorial explains those). You can unzip the file I posted to get an idea of what to make as well. I did this with the original boot animation on my ROM.

wikedawsum said:
I followed this tutorial here: http://forum.xda-developers.com/showthread.php?t=1096068
There's also a tool to help you make them here: http://forum.xda-developers.com/showthread.php?p=17011722
I've only been able to get the tool to work if I have part0 and part1 folders (the tutorial explains those). You can unzip the file I posted to get an idea of what to make as well. I did this with the original boot animation on my ROM.
Click to expand...
Click to collapse
If they could make it a little simpler, I'm lazy

Related

Decepticon Boot

Saw this works for us as well as long as on Froyo or Darchdroid. I thought was pretty sweet.
http://forum.xda-developers.com/showpost.php?p=6825204&postcount=1
works good the code at the end is just a little big on my screen. maybe we can tweak it
what if youre on fresh :\
primerib said:
what if youre on fresh :\
Click to expand...
Click to collapse
then it wont work out the box, you'll have to change it.
What would we have to do to make this work on Fresh 2.3.3? I've never messed with bootscreens like this so I have no idea. This is possibly one of the coolest boots I've seen though.
I'm curious about this also.
I would love to have this for Fresh or RegawMOD
Sent from my HERO200 using XDA App
prezmater said:
I would love to have this for Fresh or RegawMOD
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
I think boot.img's are diffrent for sense and non-sense roms. just a guess. cause i see when people make them for sense they say they don't work on vanilla roms or visa versa. so i think you'd have to make a whole new one.
daPorkchop said:
I think boot.img's are diffrent for sense and non-sense roms. just a guess. cause i see when people make them for sense they say they don't work on vanilla roms or visa versa. so i think you'd have to make a whole new one.
Click to expand...
Click to collapse
I am new to all of this, so I just read and research until I find stuff that works. I also have to be very careful not to brick my phone.
Thank you for this! It is better than the merging nexus one logo IMO. A little big on the hero, but who cares. If only it had some sound
daPorkchop said:
I think boot.img's are diffrent for sense and non-sense roms. just a guess. cause i see when people make them for sense they say they don't work on vanilla roms or visa versa. so i think you'd have to make a whole new one.
Click to expand...
Click to collapse
correct, i ripped apart fresh2.3.3 and he has a boot1.gif in the /system/media/bootanimation folder
on darch and froyo they have a bootanimation.zip in the /system/media folder. my guess is to take all the images in the bootanimation.zip in the part0 and possibly part1 folder stitch them together in photoshop(you can resize here too) make an animated gif, open in gimp and deoptimize then resave as animated gif. name boot1.gif and push to the /system/media/bootanimation folder.
i just adb pushed this to /system/media on zen exp and it works and it's bad ass
I can confirm this works on nfinitefx45 Rom...
Sent from my HERO200 using XDA App
thatguythatdid said:
i just adb pushed this to /system/media on zen exp and it works and it's bad ass
Click to expand...
Click to collapse
I can also confirm this method as working by doing the same using Fresh 2.3.3 (a sense UI based rom also). Happy booting decepticons!
I tried pushing this after I installed the CS6 test 4 with no luck. I still get the custom boot that was originally on it and DD2.7. After I push it, it shows that it was successful and give the size of the file transferred, but when I reboot I get the same one.
i pushed a custom gif using the images in this boot and it was either blank or it was small and different pixels like it was a bad res any ideas how to get it to work im using fresh 2.3.3
awesome guys glad you found an easier fix. for the froyo user i pushed it just fine i'm on cm6 test 4. pm me if you need help.
I'll try to retry it here in a few hours when I get off work. If I am still unsuccessful, I'll send you a PM. It's good to find another Kansan on here.
I figured out my problem, since I had just redone my Hero with the new CS ROM, I forgot to turn on USB debugging. Retried the steps and was successful.
Nice glad you got it going.
NegativeOne13 said:
I figured out my problem, since I had just redone my Hero with the new CS ROM, I forgot to turn on USB debugging. Retried the steps and was successful.
Click to expand...
Click to collapse
Sent from my Hero CDMA using XDA App

[MOD] Disable menu unlock for lockscreen.

This is a mod for the lockscreen so that the capacitive menu button is disabled for unlocking. This has been tested on Vanilla Lockscreens, but should work the same on HTC Lockscreens. This also has been tested on 3.29* based sense roms, unsure if it will work with other bases. If you have other fixes (i.e. reboot button change) you will overwrite that. Please post if you need me to upload a fixed version of that. Thanks goto ViRuS for the idea, and brut.all/jesus freke for apktool.
Instructions:
Download flashable zip.
NANDROID NANDROID NANDROID? did i miss something?
Reboot into recovery.
Flash zip and reboot.
That was easy wasn't it?
No more accidental unlockings!
Cookers/Developers: If this does not work for your rom, PM me and i can make individual flashable updates.
Rom users: reply to the thread with the base rom that it does not work on. I can find the base myself and make a list of updates.
Edit: It will take awhile to reboot, because i added a cache and dalvik-cache wipe to the update script.
Added mediafire mirror.
Links:
Rapidshare
Mediafire
Just flashed on Fresh 3.3.0.1 and it took a while for the phone to reboot but it's working great. Thanks!
Sir, you are a gentleman and a scholar. This is very, very appreciated.
Would you be willing or be able to get to the bottom of the graphical glitches with the Vanilla lockscreen? I know it's plaguing more than one person, myself included.
iamthebigcheeze said:
Just flashed on Fresh 3.3.0.1 and it took a while for the phone to reboot but it's working great. Thanks!
Click to expand...
Click to collapse
yeah, i made the update script clear cache and dalvik-cache. Updated OP to let other people know.
_MetalHead_ said:
Sir, you are a gentleman and a scholar. This is very, very appreciated.
Would you be willing or be able to get to the bottom of the graphical glitches with the Vanilla lockscreen? I know it's plaguing more than one person, myself included.
Click to expand...
Click to collapse
Locate the 2.1 fix, and I'll see what i can do.
Here is the page that talks about the fix and has the files, and this is the file itself.
Thank you in advance.
Just found a bug (and a pretty major one). It worked perfectly fine disabling the menu button unlock; however, it also FC'ed the HTC dialer, vanilla clock, and HTC gallery every time I tried to open them. Nandroid was my friend today. Not sure if this will happen with anyone else.
Link not working
Sent from my PC36100 using XDA App
cubiche said:
Link not working
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Yeah we need a mirror please!
I'll look into the issues tonight. I'll also upload it to mediafire tonight. What Rom are you using to get fc's? Noone else has reported fc's.
Sent from my PC36100 using XDA App
preludedrew said:
I'll look into the issues tonight. I'll also upload it to mediafire tonight. What Rom are you using to get fc's? Noone else has reported fc's.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
I've got it, the link is working, they just changed the homepage, lol
I was waiting for this since i got my evo, if you do a search you'll find A LOT of threads i made asking for this
Good job preludedrew! Thank you.
added mediafire mirror. Rapidshare did a UI update to their site today, so its possible it was down at that time.
preludedrew said:
I'll look into the issues tonight. I'll also upload it to mediafire tonight. What Rom are you using to get fc's? Noone else has reported fc's.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Fresh 3.3.0.1
Everything was working fine until I flashed this zip. Maybe I'm just the only one with a stubborn Evo. lol
i have been looking for this for the past few days. a couple of questions before i flash. does it work on stock rooted deodexed with a removed HtcLockScreen.apk? also what .apk have you edited, i have mods made to my framework-res.apk, wondering if they will be touched. Thanks!
EDIT: After flashing on Rooted Doedexed stock rom, it foze on the 4G boot screen. i did a battery pull and tried again... IT WORKS! THANK YOU, THANK YOU!!!
so, i'm new to android. does anyone mind giving me step-by-step instructions on how to do this to my fascinate? thanks.
I'm experiencing graphical glitches too on Fresh 3.3.0.1, unless the colors are supposed to be different.
charleypark said:
so, i'm new to android. does anyone mind giving me step-by-step instructions on how to do this to my fascinate? thanks.
Click to expand...
Click to collapse
You won't be able to use this hack on the fascinate, you'd have to have one specifically made for your phone i think.
jxr94 said:
You won't be able to use this hack on the fascinate, you'd have to have one specifically made for your phone i think.
Click to expand...
Click to collapse
You are correct from what i have seen, also, there is an easier way to do this, also i didn't think the Menu button even did that, sure hasn't anytime i have tried it, or maybe it's because i'm using sense.
I tried to flash this and did not work for me im rooted on evo with no custom rom I just don't like the slider oh and i used unrevoked if that means anything. Im new to this also any suggestions or did I just miss something?
ATM I have two choices: Vanilla Lockscreen with this fix or Reboot Menu. Can you implement your fix with this reboot menu?
http://forum.xda-developers.com/showpost.php?p=8034448&postcount=2
link above first pic
I decompiled and compared these two services.jars and could not find common differences to combine and recompile the fixes myself. I don't think you want to give up your secrets and I am not a programmer. Unless you have tips so I can accomplish this myself.
Raheem387 said:
I tried to flash this and did not work for me im rooted on evo with no custom rom I just don't like the slider oh and i used unrevoked if that means anything. Im new to this also any suggestions or did I just miss something?
Click to expand...
Click to collapse
This needs to be flashed with a deodexed rom.

Lockscreen and power mods

Anyone have these for the deodexed KD1 build? I seem them for KC1 but nothing higher.
http://forum.xda-developers.com/showthread.php?t=1101345
Can that be used with your gbtheme?
Eric-1987 said:
Can that be used with your gbtheme?
Click to expand...
Click to collapse
Yup,
GB THeme - Use if fresh flash
update - Use if you currently have Lockscreen Mod
You are the man! My phone is nearly complete I just need something to get rid of this tmobile boot and shutdown animations.
Go to the themes and apps section and check out the original vibrant bootanimations. It rocks compared to the stock pink stuff.
Thats where this thread is. Can you link the thread? I cant find what you mean.
Srry i don't know how to link the thread but its on the same page as this. Just go to [mod] original galaxy s bootup and shutdown screens and the instructions are in the op. Hope that helps.
I just posted on the thread you are looking for so it should be at the top of the thread list now.
Make sure to flash the theme first then the boot animations, there is not enough room for both on the /system partition so a few of the shutdown images will be missing. But still better than stock.
If you flash the boot animations first you may brick and have to odin back.
Hes right b carefull! If u want u can just extract the files from the zip and then just use root explorer or the like and overwrite all the files manually. Thats how i did it.
Yep thats how I did it. Working flawlessly! Thanks everyone for the help my phone is as close to how I want it now.
fatherof4 said:
Hes right b carefull! If u want u can just extract the files from the zip and then just use root explorer or the like and overwrite all the files manually. Thats how i did it.
Click to expand...
Click to collapse
It is actually better to flash via CWM, root explorer is more likely to give you "not enough space error" then you will have problems on reboot.
CWM will write over existing files and generally works really well.
I thought doing it via cwm would get me a brick if I have already themed?
Eric-1987 said:
I thought doing it via cwm would get me a brick if I have already themed?
Click to expand...
Click to collapse
Nope, other way around if you CWM the boot animations then theme you may brick.
If you CWM theme then boot, all good.
Can work the for the stock KD1 rom that come installed on the galaxy s 4g
Sent from my SGH-T959V using XDA Premium App
xmaster1736 said:
Can work the for the stock KD1 rom that come installed on the galaxy s 4g
Sent from my SGH-T959V using XDA Premium App
Click to expand...
Click to collapse
These will.
http://forum.xda-developers.com/showthread.php?t=1101345
corradokng said:
These will.
http://forum.xda-developers.com/showthread.php?t=1101345
Click to expand...
Click to collapse
Port one for KF2
chadster214 said:
Port one for KF2
Click to expand...
Click to collapse
Ya I will try and get around to it this weekend, might be more than a simple port, Gingerbread changed alot of stuff around. I also need to make sure whitehawkx didn't already start, otherwise would be a waste of a alot of time, it takes me a bit longer than him to get them all working..LOL

[Q][Request] Stock droid charge boot animation

Does anybody happen have the stock charge bootanimation.zip and the boot sound wav files?
Much appreciated!
Edit: Never mind I found them. But is there any way to edit the boot file to make it blue instead of red? I'm trying but I can't seem to find out how.
Sent from my SCH-I510 using XDA App
Delete
Sent from my SCH-I510 using XDA App
Mind directing me to where you found the stock boot animation for the charge?
No way to edit .qmg files without qmage software...which is proprietary...which means it's expensive. Samsung mainly uses this devil-spawn file format in their Bada OS.
Edit:I spoke with a couple guys ok the Bada forums (rather I PMed them a few months back) who have edited these files and never received an answer from them. Perhaps you might have better luck...perhaps not.
None are more hopelessly enslaved than those who falsely believe that they are free.
mal.reynolds said:
Mind directing me to where you found the stock boot animation for the charge?
Click to expand...
Click to collapse
I would like to know that too.
~John
http://db.tt/Z4tpFs6Q
Everything you need should be in this zip, both qmg files and the power on.wav
Just extract and place the files where they need to go.
None are more hopelessly enslaved than those who falsely believe that they are free.
Sent from XDA Premium App
Any issues with these files in gingerbread? I am currently using Humble 3.1. Thanks for providing the zip. Still no answer from the Bada forums?
I did get a reply linking me to a theme developing tool for bada, cant remember the name off hand...it does handle .qmg files however there is no direct front end to manage it and i am far to inept to try and break down and isolate the code needed for this...
So essentialy, no lol
whether in a suit or a loincloth, people are ignorant little thorns cutting in to one another...
mal.reynolds said:
Any issues with these files in gingerbread? I am currently using Humble 3.1. Thanks for providing the zip. Still no answer from the Bada forums?
Click to expand...
Click to collapse
I'm not sure if the custom ROMs will support the qmg boot anis. I haven't tried them.
The worst I can see happening is it won't work and you'll end up withe the plain android boot, or it will and it will be "watermarked" with the android. Somewhere in the past there was a post floating around on how to fix the "watermarked" boot but I can't remember where I saw it. Hope this is helpful
whether in a suit or a loincloth, people are ignorant little thorns cutting in to one another...
Found it
mal.reynolds said:
Any issues with these files in gingerbread? I am currently using Humble 3.1. Thanks for providing the zip. Still no answer from the Bada forums?
Click to expand...
Click to collapse
paul_viado said:
go into root explorer go into SYSTEM then BIN inside BIN youll find a file named BOOTANIMATION it should be near the top since its in alphabetical order just delete that file and itll get rid of the "android" animation thats over your bootanimation. and reboot
Click to expand...
Click to collapse
if you try it and get the watermark that should fix it
hesh.monster said:
http://db.tt/Z4tpFs6Q
Everything you need should be in this zip, both qmg files and the power on.wav
Just extract and place the files where they need to go.
None are more hopelessly enslaved than those who falsely believe that they are free.
Sent from XDA Premium App
Click to expand...
Click to collapse
Can I get an updated link please

[MOD] No Banding - Dithered Holo Background - CWM

I have to sell my computer because I'm moving. I won't be able to make these for a while. They're very easy to do on your own though.
First, download this image and don't change its name.
This has probably been described a thousand times here, but I'm posting instructions for newcomers.
Steps:
1 - Extract ROM of your choice
2 - Navigate to /system/framework
3 - Using 7zip, open (don't extract) framework-res.apk
4 - Navigate to /res/drawable-nodpi/
5 - Drag background_holo_dark.png into the folder. It will replace the original
6 - Close 7zip window
7 - Using 7zip, open (don't extract) the original ROM download .zip
8 - Navigate to /system/framework
9 - Drag the edited framework-res.apk into that folder. It will replace the original
10 - Flash ROM
Using these instructions, you can take any .zip package made for Clockworkmod if you want to flash it after you install the ROM. Just delete folders except for meta-inf and drag a folder with the following directory structure into the .zip package: system/framework/framework-res.apk
That's it.
FLASH IN CLOCKWORKMOD -- ALWAYS BACK UP FIRST!!!!!!!!​
Credit to endursa for making the dithered background image
I took endursa's image and put it into a flashable zip for Clockworkmod. It worked fine on my device. YMMV
No more gross banding on the uninstall screen and wherever that background exists in the UI.
I know there was already a zip for this mod by KamikaZeeFu, but it didn't work on my stock (rooted, unlocked) AT&T One X because KamikaZeeFu built it for VillainTheme, so it didn't flash.
UPDATE: I'll add links for other ROMs, because if you flash one of these on a custom ROM it will likely screw things up.
This overwrites anything you have might have modified in framework-res.apk
For STOCK 1.82: http://www.mediafire.com/?k06sfrmg6fl498j
For STOCK 1.85: http://www.mediafire.com/?kwy2lk791ybeysn
For CleanROM 2.0 by scrosler: http://www.mediafire.com/?16calbhgkpbwzdx
For CleanROM 2.1 by scrosler: http://www.mediafire.com/?p1tazy2jta7zmta
For CleanROM 2.3 by scrosler: http://www.mediafire.com/?9nxfhn2920voz30
I CLAIM NO RESPONSIBILITY TO ANYTHING THAT GOES WRONG WITH YOUR DEVICE. FLASH AT YOUR OWN RISK!
Sitting at 1.73 I'm too scared to flash.. however these mods were great on my gnex. Good job!
Sent from my HTC One X using xda premium
ChongoDroid said:
Sitting at 1.73 I'm too scared to flash.. however these mods were great on my gnex. Good job!
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
I didn't do anything but put the image in the appropriate place. Check the link I put in the OP for the source. I'll update the OP to be more specific in giving credit.
Oh I wasn't implying anything, they simply took a higher rez image if my memory serves. Looked great on my nexus so I'm sure it'll look just as good on the hox
Sent from my HTC One X using xda premium
ChongoDroid said:
Oh I wasn't implying anything, they simply took a higher rez image if my memory serves. Looked great on my nexus so I'm sure it'll look just as good on the hox
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
Oh ok.
If you're unlocked with clockworkmod, send me (well, upload it somewhere) the framework-res.apk from your phone and I'll add it if you want.
I planning to use the 1.82 one, do we have to be de-odex to flash this or can we flash it on stock? thanks.
NguyenHuu said:
I planning to use the 1.82 one, do we have to be de-odex to flash this or can we flash it on stock? thanks.
Click to expand...
Click to collapse
I pulled the apk and flashed it back all on stock 1.82 and it worked for me. Everything is exactly the same as when it was pulled except for that one png file.
Great thanks, works as expected. something so simple can make such a big difference haha
NguyenHuu said:
Great thanks, works as expected. something so simple can make such a big difference haha
Click to expand...
Click to collapse
+1
No problem.
And I totally agree. First of all, this should have been the image used in the stock build. Second, everyone who makes a custom ROM should consider including this image. Third, this image is used so often on the phone that it almost ruined the expericne for me before I found the original thread with that image in it. It's really easy to put this into any ROM, but if anyone is scared to mess with it, or just doesn't feel like it, let me know and I'll make more. I'll continue to make them until ROM cooks and developers start putting it in their ROMs.
Otherwise, there are tutorials for making/modifying your own flashable zips, but I can post a short tutorial later for any new people here. My daughter is using my computer to watch a movie right now.
I just finished a semester of learning C++. I'm going to try to learn Java over the summer to get a head start before next semester. Maybe I'll finally be able to contribute more in the near future. I've been saying that for almost two years... but I'm working on it.
jmattp said:
No problem.
And I totally agree. First of all, this should have been the image used in the stock build. Second, everyone who makes a custom ROM should consider including this image. Third, this image is used so often on the phone that it almost ruined the expericne for me before I found the original thread with that image in it. It's really easy to put this into any ROM, but if anyone is scared to mess with it, or just doesn't feel like it, let me know and I'll make more. I'll continue to make them until ROM cooks and developers start putting it in their ROMs.
Otherwise, there are tutorials for making/modifying your own flashable zips, but I can post a short tutorial later for any new people here. My daughter is using my computer to watch a movie right now.
I just finished a semester of learning C++. I'm going to try to learn Java over the summer to get a head start before next semester. Maybe I'll finally be able to contribute more in the near future. I've been saying that for almost two years... but I'm working on it.
Click to expand...
Click to collapse
is it as simple as dragging and dropping the .PNG into systemui.apk? or do you have to decomplile and all that fancy stuff? Reason I ask is Cleanrom2.1 is release and has new changes so cant use the old one no more.
jmattp said:
Oh ok.
If you're unlocked with clockworkmod, send me (well, upload it somewhere) the framework-res.apk from your phone and I'll add it if you want.
Click to expand...
Click to collapse
Hey that would be awesome! Cheers
http://db.tt/5lPQQSmw
Sent from my HTC One X using xda premium
NguyenHuu said:
is it as simple as dragging and dropping the .PNG into systemui.apk? or do you have to decomplile and all that fancy stuff? Reason I ask is Cleanrom2.1 is release and has new changes so cant use the old one no more.
Click to expand...
Click to collapse
It goes in /system/framework/framework-res.apk/res/drawable-nodpi
jmattp said:
It goes in /system/framework/framework-res.apk/res/drawable-nodpi
Click to expand...
Click to collapse
Just a normal drag and drop or do we need to decompile?
NguyenHuu said:
Just a normal drag and drop or do we need to decompile?
Click to expand...
Click to collapse
Drag and drop
...into a flashable zip. I think you might run into problems doing it with a file explorer while the OS is running.
Or just put it in the ROM before you flash. That's what you're asking, right?
jmattp said:
Drag and drop
...into a flashable zip. I think you might run into problems doing it with a file explorer while the OS is running.
Or just put it in the ROM before you flash. That's what you're asking, right?
Click to expand...
Click to collapse
yeah I did it via flashable zip, works fine, thanks.
ChongoDroid said:
Hey that would be awesome! Cheers
http://db.tt/5lPQQSmw
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
Link sent in a PM
jmattp said:
Link sent in a PM
Click to expand...
Click to collapse
Worked great and looks awesome!
Here's a before and after for the folks that aren't quite sure what this does.
Sent from my HTC One X using xda premium
Thanks for this fix!
After further use this mod seems to break CleanROM 2.1 reboot menu. Not sure about anything else.
I also am not sure if it has anything to do with CleanRom being deodexed.

Categories

Resources