Related
i just got the captivate i rooted it today im a newbie to all of this so im still unsure of everything im doing i dont care about bricking it. i was reading the "how to load a custom rom" and im at the step where is says (please flash the stock kernel through ODIN first then do our How To Root procedure then come back to this to continue) im unclear about flashing the stock kernal
and what custom rom you guys use and why you like it
Simple, Cognition.. It is all in one package and it is very simple to install but it just seems to work.
Only other ROM I will be going to is cyanogen if and when it is released.
Um and I might be wrong here but I thought Odin was only needed if you had to revert back to a stock ROM before flashing?
Bah damn swype putting words in my mouth again....
Sent from my SAMSUNG-SGH-I897 using XDA App
Ok I will check it out I think I I'm gonna check it out
Sent from my SAMSUNG-SGH-I897 using XDA App
Yea I would go cognition. It is what I run.
Very snappy and with the voodoo lagfix it is extremely fast.
I also reccomend the hsupa kernal if you dont use a bluetooth headset.
And 2.1.5 has proved to give me a very decent battery life.
so if i want to try a different rom i have to flashback to the stock att rom then on to the new rom?
fiveoneooo said:
Yea I would go cognition. It is what I run.
Very snappy and with the voodoo lagfix it is extremely fast.
I also reccomend the hsupa kernal if you dont use a bluetooth headset.
And 2.1.5 has proved to give me a very decent battery life.
Click to expand...
Click to collapse
i dont want to sound like a dump ass but what is hsupa kernal and i have to use a bluetooth headset at work
jamrck said:
i dont want to sound like a dump ass but what is hsupa kernal and i have to use a bluetooth headset at work
Click to expand...
Click to collapse
The HSUPA Kernel enables HSUPA data speeds on the Captivate, which AT&T has crippled on the phone. It's discussed at length in several posts in the developer section.
From what I have read, one of the bugs in installing it is that you lose Bluetooth, so it would be a non-starter for you.
okay after reading a bit more and help from other users finally got this working and maybe itll be help to someone else
PHONE MUST BE ROOTED CHECK OUT THE ROOTING THREAD
AND DO THIS AT YOUR OWN RISK UNDERSTAND THE RISK OF OC
THE ARIA IS ALREADY PRETTY ZIPPY SO PERSONAL CHOICE
1. grab any rom cm6 or liberated, then go into the kernel thread and download the kernel pack
some people are reporting certain versions are breaking wifi,3g etc
i used oc768-v3.2 legend zip wifi working no issues plus this is sufficient for me
but if it doesnt work play around with diff kernels
2. boot into recovery mode vol down and power
3. flash your rom then flash the kernel pack and reboot
4. download and setcpu app and start OC
im not taking any credit for any of this but i wanna thank for everyone who worked on this
i just simply wanted to write this because i wanted to try this but i got alot of diff info
but after other users made a few key points decided to write this
anyone feel free to add to this and if i made any errors or whatever mods go ahead and change it
Read ,Search ,Read . I had no luck with the 3.5 kernels tho.
What you want is some hand holding it looks like.
I figured this all out for myself by reading the forum.....
but anyway I'll answer it in the foolish hope of no more people asking the same questions
1. download what files....? if your talking about roms i think youll know where to go after reading this post.
2. you can use whatever rom you like, the main two on this forum and as far as I know on the aria full stop are Liberated and Cyanogen Mod 6. Liberated is based on the stock aria rom so its pretty much what your used to with your stock aria (minus the AT&T rubbish plus a few added perks). Cyanogen Mod 6 is based on bare android so it doesn't have all the sense ui, it is also based on froyo which is the version above eclair (which is what is running on your base aria/ liberated rom). Do not ask which rom to use, it is up to personal preference you just have to try both and see which one you like.
3. you flash a kernel the same way you install a rom on your phone except instead of selecting the rom .zip file you select the kernel .zip file. You should first flash a rom and then afterwards flash the kernel. As ycode90 said some kernels don't work so just go through the process again and try another one, the 3.2 825 kernel was working on liberated for me so try that one.
All OC kernals broke wifi or mobile network on my buddies Aria, I left him with the stock kernal from CM6.
Sent from my T-Mobile G2 using XDA App
im running dumfuqs oc kernel v3.2 844, on cm6 v6.0.2.1 my wifi works and the wireless tethering works. it runs fast the only thing that doesnt work is my bluetooth
bkmo said:
What you want is some hand holding it looks like.
Click to expand...
Click to collapse
no sir thats not the case see how after some user input sheds new light
now i can head back to square one
f it if i get it working ill post a how to
overclock went great but it keeps crashing my swype keyboard and livewallpaper
did a nandroid restore and it went back to normal and reflashed the kernel and it did it again
Has been my exp. LWP and overclock do not play well together.
ycode90 said:
Has been my exp. LWP and overclock do not play well together.
Click to expand...
Click to collapse
Yup, it had been my experience that these OC kernels and *anything* that utilizes gpu sucks. There isn't a kernel for the aria at this time, and by using these kernels here you are increasing cpu performance at the expense of gpu performance. I don't believe its worth it at all just for a linpack number.
Yep patiently waiting for an ARIA kernel.
Working over clock:
http://forum.xda-developers.com/showthread.php?t=736019&page=33
, just need to get the latest nightly, 87 so that bluetooth, wifi, and network all works great.
Good Luck
I don't understand how to flash the kernel or rom. I see no options in Recovery. I'm on CM6.0.2.1 trying to use oc844-v3.5-legend-cm-2.6.29-signed. Help?
lasertits said:
I don't understand how to flash the kernel or rom. I see no options in Recovery. I'm on CM6.0.2.1 trying to use oc844-v3.5-legend-cm-2.6.29-signed. Help?
Click to expand...
Click to collapse
you install it the same way you installed the CM6 Rom. Put the kernel zip on your SD card and install the zip via Clockwork. Also anytime you flash a new Rom you will have to reflash the overclock kernel.
My only experience with android phones so far has been with the captivate.Flashing kernels on that phone was easy with neldars app.Does anyone know if that app is functional on the inspire or if theres a similar app.
Thanks in advance guys.
I haven't tried neldar's kernel flasher on the Inspire yet, but flashing a kernel on the Inspire is pretty simple. Just reboot into recovery, install zip from sdcard, and select the kernel. Flash and reboot
DO NOT try that app on the inspire.
It's called sgs kernel flasher for a reason
Sorry for off topic but di11i are you going to be developing the source?
Im gonna try my damndst
Just got the phone last night and rooted, flashed leedroid with stock kernel and radio just so I wouldn't be stock today at work( and I work construction, and can't even use my phone much during the day.- that's how much I do not like the stock set up and bloat)
So I'm gonna try making something tonight, deodexed zipaligned debloated and optimized.
Mostly waiting for kernel source to fix audio as that should be fairly easy , but I'm gonna try to make something to hold some people over until then
di11igaf said:
Im gonna try my damndst
Just got the phone last night and rooted, flashed leedroid with stock kernel and radio just so I wouldn't be stock today at work( and I work construction, and can't even use my phone much during the day.- that's how much I do not like the stock set up and bloat)
So I'm gonna try making something tonight, deodexed zipaligned debloated and optimized.
Mostly waiting for kernel source to fix audio as that should be fairly easy , but I'm gonna try to make something to hold some people over until then
Click to expand...
Click to collapse
What was your reasoning for leedroid? And the TELUS kernel works just as well with faster data and connectivity without any instability.
I'm also down to be a beta tester.
I have some news on my CM7 porting, good and bad.
The good new first.
Good:
I can get the FULL version including the kernel to run in safestrap, and it is like 97% working.
Bad:
I can not get the ROM, without the kernel, to boot properly when flashing it to the phone from the bootstrap. I have spoken with several experts and this may not be something we can work out until the bootloader is unlocked. There are hooks in almost every part of CM that make android calls, that are part of their own version of android (it is heavily customized, and the code is available, and how I got it) and the kernel they use. The reason this works in safestrap, is because I can load the kernel on top of our kernel, but it is slower this way. Think of running a VM on top of your current OS, and how that can have some lag if your computer is not real powerful.
The bottom line, I am not sure if we can get CM working for everyone just yet. I am not sure where lfaber06 is at with CM9 and if he has tested it directly on the phone without safestrap yet or not. Maybe he will post in here what his experience has been, with this.
I'd like to give it a whirl anyway.
mtnlion said:
I'd like to give it a whirl anyway.
Click to expand...
Click to collapse
ONLY with safestrap, right now. If you try to flash it with the bootstrap it will softbrick your phone.
--EDIT--
Remember safestrap is not really working right now... lfaber06 and I have some highly modified versions that really are not for the rest of the world yet, and my version has a custom compiled version of CWM, and is a little buggy.
jimbridgman said:
I have some news on my CM7 porting, good and bad.
The good new first.
Good:
I can get the FULL version including the kernel to run in safestrap, and it is like 97% working.
Bad:
I can not get the ROM, without the kernel, to boot properly when flashing it to the phone from the bootstrap. I have spoken with several experts and this may not be something we can work out until the bootloader is unlocked. There are hooks in almost every part of CM that make android calls, that are part of their own version of android (it is heavily customized, and the code is available, and how I got it) and the kernel they use. The reason this works in safestrap, is because I can load the kernel on top of our kernel, but it is slower this way. Think of running a VM on top of your current OS, and how that can have some lag if your computer is not real powerful.
The bottom line, I am not sure if we can get CM working for everyone just yet. I am not sure where lfaber06 is at with CM9 and if he has tested it directly on the phone without safestrap yet or not. Maybe he will post in here what his experience has been, with this.
Click to expand...
Click to collapse
I have made quite a bit of progress on cm9 in safestrap, the only real issue i have is the radio which i am constantly trying different things with. I have not tried flashing cm9 or cm7 in the bootstrap but I have a method for it..(I think, Remember the D3 can run cm7 from the bootstrap) I have a file I have modified for cm9 that im sure will work for cm7 flashing in bootstrap. You would need to add some modified files to /system/rootfs/ and preinstall support to boot init.d and also run the fixboot.zip at boot. Really running under safestrap (i'm using the /preinstall partition) does not seem to slow it down much. But tbh I havent really "run" it while it's booted I'm usally making edits and rebooting to check for service. I'm going to tear into hashcodes cm7 for the D3 and see what I can come up with. It seems like it had the kernel included but the scripts only called for it if the safe file existed on the /data partition.
lfaber06 said:
I have made quite a bit of progress on cm9 in safestrap, the only real issue i have is the radio which i am constantly trying different things with. I have not tried flashing cm9 or cm7 in the bootstrap but I have a method for it..(I think, Remember the D3 can run cm7 from the bootstrap) I have a file I have modified for cm9 that im sure will work for cm7 flashing in bootstrap. You would need to add some modified files to /system/rootfs/ and preinstall support to boot init.d and also run the fixboot.zip at boot. Really running under safestrap (i'm using the /preinstall partition) does not seem to slow it down much. But tbh I havent really "run" it while it's booted I'm usally making edits and rebooting to check for service. I'm going to tear into hashcodes cm7 for the D3 and see what I can come up with. It seems like it had the kernel included but the scripts only called for it if the safe file existed on the /data partition.
Click to expand...
Click to collapse
PM me a link to hashcodes d3 CM7 ported ROM (if you have one, I have had a hard time locating a completed one), and not the source code, that is what I used to compile my CM7 port with. I would like to test something, I have a theory on this, that I won't share with everyone here, since it really would not be very interesting here to anyone not trying to port these over.... we will talk more about this in PM.
Thanks!
Jim what about taking a look at the Droid X2, they have a alpha build of CM 7.2?
http://forum.xda-developers.com/showthread.php?t=1442803
JRW 28 said:
Jim what about taking a look at the Droid X2, they have a alpha build of CM 7.2?
http://forum.xda-developers.com/showthread.php?t=1442803
Click to expand...
Click to collapse
that is version 2.3.4 we are on 2.3.5 and we HAVE to use ports from 2.3.5 no way around it.
Missed that little details
CM9 does work when flash through bootstrap, I tried it the other day...
farshad525hou said:
CM9 does work when flash through bootstrap, I tried it the other day...
Click to expand...
Click to collapse
Care to share???? Plz.... it may be helpful.
Sent from my MB865 using Tapatalk
Yeah a couple days ago I flashed CM9 through Bootstrap. Everything booted okay and and everything ran fine. Again the only problems were that the phone didn't work, due to the telephony.apk issue and market wouldn't launch. Otherwise everything else ran a-okay!
farshad525hou said:
Yeah a couple days ago I flashed CM9 through Bootstrap. Everything booted okay and and everything ran fine. Again the only problems were that the phone didn't work, due to the telephony.apk issue and market wouldn't launch. Otherwise everything else ran a-okay!
Click to expand...
Click to collapse
Your right it does work but my ported verison does not!! That's actually good news BC now I know where to find the problem areas. Jim this has got to help you
Sent from my MB865 using Tapatalk
lfaber06 said:
Your right it does work but my ported verison does not!! That's actually good news BC now I know where to find the problem areas. Jim this has got to help you
Sent from my MB865 using Tapatalk
Click to expand...
Click to collapse
Yes it sure does thanks, I flashed it, played with it, and I am taking a look at a few things with your CM9 ROM, and since we PM'd I have been digging into the D3 CM7.2 version that hashcode had created. I am not quite ready to flash it yet, but maybe something tomorrow, once I have the ROM to the point that I am happy to play with it on my phone and see what works and what does not.
It looks like the issue with my old CM7 ROM, from the logs I grabbed a little while ago, with logcat, were due to kernel driver files not found during loading, so it looks like my compile had issues linking to our kernel. I so wish I had the source for our phones kernel, it would make compiling CM7 so much easier, and NO the ME865 source will not due, so don't mention it here.
Jim
Glad I could help! Also @lfaber06, what do you mean by your ported version doesn't work? That's the one I flashed.
**Edit** Also the camera doesn't work, if you guys want in to that. Probably an incorrect driver or something...
So... any news to report on either CM7 or CM9?
farshad525hou said:
So... any news to report on either CM7 or CM9?
Click to expand...
Click to collapse
By ported I mean the ones i've cooked up, their not ready for prime time so no sense in uploading them but they are good to share with jim. I don't think the camera works on any of the unofficial builds it uses a new type of "ion" driver that makes the camera uber responsive. Your post has however led me to build a few working ports for bootstrap but its still the same old radio driver issue.
lfaber06 said:
By ported I mean the ones i've cooked up, their not ready for prime time so no sense in uploading them but they are good to share with jim. I don't think the camera works on any of the unofficial builds it uses a new type of "ion" driver that makes the camera uber responsive. Your post has however led me to build a few working ports for bootstrap but its still the same old radio driver issue.
Click to expand...
Click to collapse
Cool Any ideas from what phone we can pull the radio drivers from? I'm assuming that it has to be a GSM phone running the TI's OMAP processor, that also has a CM9 port, right?
farshad525hou said:
Cool Any ideas from what phone we can pull the radio drivers from? I'm assuming that it has to be a GSM phone running the TI's OMAP processor, that also has a CM9 port, right?
Click to expand...
Click to collapse
Tbh, I have no idea... I have been looking at every moto phone google can find and so far I have had no luck. Call me crazy but I think our radio is more commonly found in sony's... (I'd welcome ANY input on the radio)
lfaber06 said:
Tbh, I have no idea... I have been looking at every moto phone google can find and so far I have had no luck. Call me crazy but I think our radio is more commonly found in sony's... (I'd welcome ANY input on the radio)
Click to expand...
Click to collapse
What exactly should I be looking for to find a phone with a similar radio? Here's a system dump for the xperia play, you could try pulling the telephony.apk... http://rapidshare.com/files/45600580..._Play_DUMP.rar Most of the sony's though run on Qualcomm's Snapdragon Processor
farshad525hou said:
What exactly should I be looking for to find a phone with a similar radio? Here's a system dump for the xperia play, you could try pulling the telephony.apk... http://rapidshare.com/files/45600580..._Play_DUMP.rar Most of the sony's though run on Qualcomm's Snapdragon Processor
Click to expand...
Click to collapse
That's the thing idk... I assumed that it was a Sony radio BC when I Google rlidu300-ril.so I get a device tree for a Sony. We need to know what radio we have then we can start checking sources.
Sent from my MB865 using Tapatalk
Hi all, thanks for taking the time to read.
I have a LG G2X, love the feel, the display, the specs and the price. Hate the phone....in every other way
I am on my 4th G2X now b/c I keep taking it back to T-Mobile to get a new one based on the following things my phone does:
1. It restarts 1-2x a week, randomly with or without a power adapter plugged
2. It freezes up every other day or so and requires a hard restart (battery pull) to resume use
3. It frequently takes 5+ minutes to get a GPS lock (tried in several cities coast to coast US)
Now if it were just the first phone I could say lemon, but every G2X I have owned does this, T-Mobile told me it was a known issue with the phone but couldn't tell me if it was software or hardware in nature.
So my question to you fellow forumites is this: Is the issue hardware related (move on to another phone) or software (Rom install fixes all my worries and I'm happy forever and ever and ever)?
If you're still using the stock ROM, and are still on 2.3.3, then you are experiencing SW suckage... Get a custom CM7 Rom on there and enjoy some of the finer benefits. Stability will be better but you won't be dead-set stable. GPS has been an issue for some since the inception of the phone. Others have GREAT GPS reception.
Research the Development forums and find a CM7.2 ROM that best suits you. You can of course go CM9 (ICS) but you won't get HW Acceleration and some things just flat out don't work yet.
New2my8125 said:
If you're still using the stock ROM, and are still on 2.3.3, then you are experiencing SW suckage... Get a custom CM7 Rom on there
Click to expand...
Click to collapse
The stability and GPS performance are greatly enhanced by the stock 2.3.4 ROM, also, if you're not a CM7 fan.
mog44net said:
Hi all, thanks for taking the time to read.
I have a LG G2X, love the feel, the display, the specs and the price. Hate the phone....in every other way
I am on my 4th G2X now b/c I keep taking it back to T-Mobile to get a new one based on the following things my phone does:
1. It restarts 1-2x a week, randomly with or without a power adapter plugged
2. It freezes up every other day or so and requires a hard restart (battery pull) to resume use
3. It frequently takes 5+ minutes to get a GPS lock (tried in several cities coast to coast US)
Now if it were just the first phone I could say lemon, but every G2X I have owned does this, T-Mobile told me it was a known issue with the phone but couldn't tell me if it was software or hardware in nature.
So my question to you fellow forumites is this: Is the issue hardware related (move on to another phone) or software (Rom install fixes all my worries and I'm happy forever and ever and ever)?
Click to expand...
Click to collapse
Software...........I am running Hellfire Phoenix ROM and flashed a GPS fix, and new baseband, now I get GPS locks within <>10 seconds, my phone never freezes, or reboots.
wmm said:
The stability and GPS performance are greatly enhanced by the stock 2.3.4 ROM, also, if you're not a CM7 fan.
Click to expand...
Click to collapse
+1
Sent from my LG-P999 using xda premium
wmm said:
The stability and GPS performance are greatly enhanced by the stock 2.3.4 ROM, also, if you're not a CM7 fan.
Click to expand...
Click to collapse
Thanks for the great responses guys, just another reason I love this forum.
I should have given a few more details, I am running stock 2.3.3 on T-Mobile in the US.
Few questions for a techie (but virgin ROMer):
1. Is the 2.3.4 stock available OTA? I haven't seen any available upgrades.
2. What does baseband refer to? (trying to educate myself on the terms)
3. Any favorite ROMs? My must haves are stability and speed, other than that any goodies/awesomeness is welcome but the first two are absolute.
I am tempted to stick to stock ROMs as I haven't flashed one myself yet and this phone is my lifeblood b/c of work.
On a scale of 1-10 where 1 is "I did it with on accident when I dropped it down the stairs" and 10 is "the most difficult thing you will ever do in your life" what is the difficulty for a ROM virgin to sucessfully flash to 2.3.4 (if it is not available OTA) or CM7/other ROMs,etc?
I am technical, 12 year IT professional with MCSA/CCNA, etc but haven't done much research into the ROM biz. If its not too difficult is there a "Must read" guide for noobs?
mog44net said:
Thanks for the great responses guys, just another reason I love this forum.
I should have given a few more details, I am running stock 2.3.3 on T-Mobile in the US.
Few questions for a techie (but virgin ROMer):
1. Is the 2.3.4 stock available OTA? I haven't seen any available upgrades.
2. What does baseband refer to? (trying to educate myself on the terms)
3. Any favorite ROMs? My must haves are stability and speed, other than that any goodies/awesomeness is welcome but the first two are absolute.
I am tempted to stick to stock ROMs as I haven't flashed one myself yet and this phone is my lifeblood b/c of work.
On a scale of 1-10 where 1 is "I did it with on accident when I dropped it down the stairs" and 10 is "the most difficult thing you will ever do in your life" what is the difficulty for a ROM virgin to sucessfully flash to 2.3.4 (if it is not available OTA) or CM7/other ROMs,etc?
I am technical, 12 year IT professional with MCSA/CCNA, etc but haven't done much research into the ROM biz. If its not too difficult is there a "Must read" guide for noobs?
Click to expand...
Click to collapse
Difficulty is pretty low. If you can follow instructions, and understand what you're doing, then you should be good to go. If you want 2.3.4, you're gonna need to use LG's ****ty software. Either you use KDZ flasher, or LG's official PC suite. Both crashed on me constantly on Win7 x64. I was lucky/unlucky, it crashed right after writing the baseband (low level radio firmware). It hadn't even partitioned anything yet if I tried to turn it on, not even a backlight was showing. So I had to use NVflash to completely repartition it to stock. After that, I flashed CWM (clockworkmod), the custom recovery. Nowadays, TWRP is available. TWRP is awesome, and they have awesome Devs. TWRP (teamwin recovery project) is touch based rather than CWM and traditional volume key and power button navigation. There is CWM touch, but it's extremely experimental and I find it too glitchy compared to TWRP. TWRP is a work in progress however and there may be issues (I had one but it was easily fixed with one command when I spoke with the Devs on irc) I haven't had any serious ones though. IMO it's easier to NVflash in a Linux environment, because there is no messing around with drivers. But after drivers are installed on windows, the difficulty level plateaus.
As for my favorite ROM, that would currently temasek cm7 builds. They're stable, fast and they're customizable as f***.
I don't have any links right now, because I'm on my phone, (I can grab them later/soonish) you're going to want tga_gunman's thread named something along the lines of "One click recovery flasher" that's for CWM recovery. If you want TWRP, there's a thread that has TWRP in the title.
Also look for "ROM for recovery under NVflash" or something similar to that. That will take you back to complete stock 2.3.3 no matter what happened software wise, unless you somehow managed to break the baseband. The baseband is the only thing that cannot be fixed by NVflash, only can be fixed by LG's ****ty PC software.
For temasek's cm7 builds, the thread is not created by temasek, but the builds are by him. It should be at build 133 or 134.
If you need anything else, PM me maybe.
Good deal, I'm planning on following this thread from the general section (http://forum.xda-developers.com/showthread.php?t=1594650).
I'm leaving out of state but will work on it over the weekend.
Thanks for all your help and support everybody, any additional comments are welcome before I start flashing this weekend.
Q - Do I need to get the owain's baseband flash fix or not with the ROM you sugested, the comments on the thread are confusing me a bit. If so where can I download the correct one, can't seem to find it in the Dev threads.
mog44net said:
Good deal, I'm planning on following this thread from the general section (http://forum.xda-developers.com/showthread.php?t=1594650).
I'm leaving out of state but will work on it over the weekend.
Thanks for all your help and support everybody, any additional comments are welcome before I start flashing this weekend.
Q - Do I need to get the owain's baseband flash fix or not with the ROM you sugested, the comments on the thread are confusing me a bit. If so where can I download the correct one, can't seem to find it in the Dev threads.
Click to expand...
Click to collapse
You only need that baseband fix if you have the latest baseband (March 2012) from v21y. It should be available in owain's hopto.
tahahawa said:
You only need that baseband fix if you have the latest baseband (March 2012) from v21y. It should be available in owain's hopto.
Click to expand...
Click to collapse
Help a noobie out, what/where is owain's hopto?
Edit: I'll test without the fix, to be sure and flash the baseband if needed, i understood from the comments in the ROM's thread that its needed for Bluetooth calls.
I might have found the baseband fix link (http://forum.xda-developers.com/showthread.php?t=1776843) can anyone confirm?
mog44net said:
Help a noobie out, what/where is owain's hopto?
Edit: I'll test without the fix, to be sure and flash the baseband if needed, i understood from the comments in the ROM's thread that its needed for Bluetooth calls.
I might have found the baseband fix link (http://forum.xda-developers.com/showthread.php?t=1776843) can anyone confirm?
Click to expand...
Click to collapse
That's the one
Edit: if you need Bluetooth calling on the new baseband, don't flash any cm ROMs. Stay on the old one if you need/want Bluetooth calling.
tahahawa said:
That's the one
Edit: if you need Bluetooth calling on the new baseband, don't flash any cm ROMs. Stay on the old one if you need/want Bluetooth calling.
Click to expand...
Click to collapse
Firstly thanks for all the good Q/A, like a good forum noobie, I'm marking thanks each reply.
I want to make sure I understand your comment. This is what I understood, let me know if I'm off/on. The CM Roms do not work with BT calling, so I should stick with stock if that's important to me? I would assume then for me to get beyond my current issues (OP) my best bet would be to Flash the 2.3.4 stock?
Thanks again for the info and time.
***edit***
Nix the above. I completely read it wrong, thought you were saying all CM ROMs didn't work with Bluetooth. Just so on the current Baseband.
I'm on Jul 15 2011 Baseband currently, so I'll attempt the CM7 ROM this weekend when I'm back home and able to devote more focus. Coming from stock 2.3.3 do I need to flash a kernel as well or will that be in the ROM <---showing my ROM noobness but unashamed to learn.
mog44net said:
Firstly thanks for all the good Q/A, like a good forum noobie, I'm marking thanks each reply.
I want to make sure I understand your comment. This is what I understood, let me know if I'm off/on. The CM Roms do not work with BT calling, so I should stick with stock if that's important to me? I would assume then for me to get beyond my current issues (OP) my best bet would be to Flash the 2.3.4 stock?
Thanks again for the info and time.
Click to expand...
Click to collapse
If you decide to get the newer baseband (you get it with 2.3.4 kdz, only way to get new baseband) and bt calling is important, do not go to cm. If you don't mind staying on the older baseband, bt calling will work fine on cm.
tahahawa said:
If you decide to get the newer baseband (you get it with 2.3.4 kdz, only way to get new baseband) and bt calling is important, do not go to cm. If you don't mind staying on the older baseband, bt calling will work fine on cm.
Click to expand...
Click to collapse
Lol, I feel so dumb, its like learning a new language while being held underwater.
kdz=?
I'm trying to understand why I would decide to get the newer baseband? If I do I can use BT calling but can't use CM7 ROMs, if I don't I can use CM7 ROMs and BT calls should work fine. Dont see the upside to upgrading the baseband, unless it has issues?
BTW as I haven't seen it, I get happy feelings when I look at your avatar
mog44net said:
Lol, I feel so dumb, its like learning a new language while being held underwater.
kdz=?
I'm trying to understand why I would decide to get the newer baseband? If I do I can use BT calling but can't use CM7 ROMs, if I don't I can use CM7 ROMs and BT calls should work fine. Dont see the upside to upgrading the baseband, unless it has issues?
Click to expand...
Click to collapse
KDZ = LG's proprietary file type to update their phones via PC officially. A lot of people say the new baseband gives them better gps and call quality. Basically if you don't change baseband to the new one, everything will work perfectly. If you DO switch, everything will work perfectly, but only on stock. Everything will work on cm except Bluetooth calling with the new baseband. I don't think it's worth restricting yourself to stock because of the new baseband and and bt calling. My recommendation? Don't change baseband, just go to cm. Also, soon we might start to see android 4.1.1 jelly bean. They won't be stable for a while though.
Too much fun.
Couldn't wait, just finished flashing CWM, then backed up, then wiped like 400x then dropped the CM7 ROM you sugested.
Longest 10 minutes of my life letting it sit.
Working great, I'll update here with any additional info or create a new thread.
TY TY TY all
Update -
Still working great, only two issues.
* Cellular network is only showing E, played with the settings but can't seem to get any G networks.
* Google apps/play isn't installed, I think I have this one figured out to download/flash from here (http://forum.xda-developers.com/showthread.php?t=1049154) (http://goo.im/gapps/) but I'm confused about which one to DL.
help plox?
mog44net said:
Update -
Still working great, only two issues.
* Cellular network is only showing E, played with the settings but can't seem to get any G networks.
* Google apps/play isn't installed, I think I have this one figured out to download/flash from here (http://forum.xda-developers.com/showthread.php?t=1049154) (http://goo.im/gapps/) but I'm confused about which one to DL.
help plox?
Click to expand...
Click to collapse
If it's cm7 get the latest gb one, if it's cm9 get the latest ics one... It has gb or ics in the name of the file.
Sent from my LG-P999 using xda app-developers app
cainG2x said:
If it's cm7 get the latest gb one, if it's cm9 get the latest ics one... It has gb or ics in the name of the file.
Sent from my LG-P999 using xda app-developers app
Click to expand...
Click to collapse
Much thanks, i'll do that now.
Any ideas on being stuck on EDGE network only?
mog44net said:
Update -
Still working great, only two issues.
* Cellular network is only showing E, played with the settings but can't seem to get any G networks.
* Google apps/play isn't installed, I think I have this one figured out to download/flash from here (http://forum.xda-developers.com/showthread.php?t=1049154) (http://goo.im/gapps/) but I'm confused about which one to DL.
help plox?
Click to expand...
Click to collapse
Yeah goo.im/gapps is the best. For the cell network, try going settings> wireless>mobile>network operators and select "select automatically"