Related
1.0 – WELCOME AND DISCLAIMER
So, it seems like a lot of people are having problems with their new Samsung Epic 4G. I thought I'd take a minute and throw together a little comprehensive guide on, well, everything. I'll be updating this periodically, so be sure to check it out.
I'll also be working on formatting it to improve readability... I'm not so good with this markup language that forums make you use, so bear with me. If I can figure out some basic tricks, we'll be in business.
And, just so you know, this is just a guide. As long as you follow it and do research, everything should go fine. That being said, I am not responsible for what happens to your phone. This is all elective and I am not forcing you to do any of this. You brick your phone, you own up to it. I'm only trying make it as easy as possible for your to avoid that.
2.0 – GETTING STARTED
New to Android? Need to root? Just got your phone? Not totally clear on everything? Start here. Even if you have experience with Android, had your Epic since day one, or whatever, you'll still want to check this section out.
2.1 – TERMINOLOGY
First of all, you need to familiarize yourself with the terminology. This is vital to understanding what you are doing, so I'll outline as many as I can.
Brick – Not a term that should be thrown around as much as it is. If you have a bricked device, it is worthless. Like, completely. It is literally as useful as a brick. You CANNOT fix a brick. Everything else is just just breakage.
Root – a)This term comes from Linux/UNIX. To obtain root access means that you have elevated privileges. Look at this like administrator rights in Windows. It's what allows you to run custom software and access administrator setting in Android.
b)The uppermost folder. Such as “/”, “C:\” , et cetera.
Rooting – Gaining elevated root admin access.
Kernel – A kernel is the base of an operating system. For Android, it's where all the drivers and system information resides. A custom kernel can contain undervolting instructions, overclocking instructions, and many other battery-saving, power-giving, phone-enhancing features. There are several options, so make sure you do your research and choose the kernel that offers what you are looking for.
Shell – The shell is the part that you see. It's the interface that interacts and allows you to interact with the kernel.
ROM – A ROM is the combination of a kernel and a shell. Think of this like an operating system.
Dev – Dev is short for developer. These are the people who spend their days and nights writing code and bug testing to bring you the ROMs you love. These guys are the reason you're here, so show your appreciation!
Chef – Chefs and devs are essentially the same thing.
Recovery – A system that allows basic phone function. You can flash from this, clear data, and do very basic debugging. As long as you can boot to this, your phone is NOT bricked.
Flashing – The act of installing a ROM or fix to your phone through recovery.
Wiping – The act of performing a factory reset or cache clear from recovery. Your settings are gone, your apps are gone, your phone is as it was when you you got (to an extent). Formats /system/. This is not reversible.
CPU – Central Processing Unit. The brain of the phone. All data travels through this at some point.
Overclocking – Pushing your CPU to its limits. The CPU has a stock clock speed (1GHz for the Epic), and overclocking is pushing it past that.
Undervolting – Making the phone use less power. This saves battery.
AOSP – Android Open Source Project. Frequently referred to as “Vanilla”. The actual people who make Android. Go here for more information.
Theme – A cosmetic change to the user interface.
One-Click – A script or program that does everything for you.
Busybox – A collection of scripts that allow deeper editing of the system while it is running.
Remount – An easy method of mounting /system/ for writing.
Stock – Samsung-released, no editing, as-is stuff. Basically, how the phone came.
OTA – Over the air. Updates that automatically come to your phone, through your service.
adb – “Android Debug Bridge” A debug program for accessing your phone.
deODEX – Combining the ODEX file and the APK files for all the items in the /system/ folder. Allows for easier theming and customizing.
FC/Force Close – When a program or app crashes.
2.2 – WHY SHOULD I ROOT MY PHONE?
Rooting offers several great things including, but certainly not limited to, access to hidden features, total customization, better battery life, and overclocking. It gives you control over the device that you paid money for in the first place. The devs here are great at finding features that the manufacturers left out or disabled and making them work.
It also is a great hobby. Even if you aren't a developer yourself, flashing ROMs and trying out new features can be a lot of fun and definitely kill boredom. And who knows? Maybe you'll end up learning something and start coding yourself.
2.3 – ROOTING
Great! Now you know some words! So, what next? Well, we need to achieve root access on your phone. There are a few ways to accomplish this on the Epic. Please note that the one-click methods are hit and miss and are affected by several factors, including computer speed, cable, USB ports, and, for all intents and purposes, random chance. I HIGHLY recommend you open the .bat files and run every command in adb manually. I'll update this guide, eventually, with how to do this.
If you're running Windows, you're going to need the drivers for this phone. Install them BEFORE connecting your phone to your computer. You can get them here:
32-bit: Click here
64-bit: Click here
You'll also need to put your phone into debug mode. After you turn this on, you can just leave it on. To do this, go to settings, and then to applications, then to development, and then tick the “USB debugging” check box.
I also recommend using a cable other than Samsung's cable that came with the phone. Really, that cable is hardly good for anything more than charging. It's low quality and has caused a lot of users more than a headache. If you are unable to get another cable for whatever reason, run each command individually from adb. Check the section about adb and the Android SDK later in the guide for more information on how to do that.
2.3.1 – The Jokeyrim temporary root with noobnl's one-click script method – DO FIRST
Let it be known that I don't recommend relying on this method. It's janky and can cause problems once you get deeper into Android modification. Use it to get your remount scripts and then quickly do the kernel mods in the steps in 2.3.2.
Go here and download the .zip file. Extract the .zip contents to your desktop. Open the folder, run “run.bat” and let it go.
NOTE: This is just root, this is temporary, and this DOES NOT give you access to a recovery. All this will allow you to do is run applications that require root or busybox and adds the remount script.
2.3.2 – The rooted kernel and recovery method method – DO SECOND
I do recommend that you use this method. This gives you true, permanent root.
There are a couple of ways to do this. I actually suggest you follow both guides, too. This will help prevent you ever getting to Samsung's stock recovery, which is worthless for your purpose.
The first is noobnl's recovery method, and definitely the one you should do first. You can find it here. Download the .zip file and extract its contents to your desktop. There is an issue with this .bat file, so you're going to have to do some extra steps. With adb (go to the section about the Android SDK and adb further in the guide if you do not know what this is) and type:
Code:
adb shell
su
remount rw
exit
exit
(the two 'exits' is not a typo)
After running those commands, open your extracted folder and run the run.bat file. Should be smooth sailing.
The second is koush's method. koush's thread is here, but I that's a complicated method. After you do noobnl's method above, go to this thread and download the .zip from that. Put that .zip on the root of your SD card. Boot into the Clockwork recovery by turning the phone off, holding down the camera button, the volume down button, and pressing the power button until the phone turns on. Once in there, do this:
1. BACK UP YOUR PHONE. I cannot emphasize this enough. Backups are sooo important in your Android modding quest. Backup and do it often. (Backup and restore → Backup).
2. Go to “Flash zip from SD card”
3. Choose zip from sd card
4. Select the zip we put there earlier
5. Click “Yes”
6. Let it do its thing
Once you've done this, you need to boot into the phone, go to the market, and download “ROM Manager”. From that, click “Flash recovery” (the top option) and select the Epic. This will take a minute. From this point on, you can use ROM Manager to boot into the Clockwork Recovery.
2.3 – FLASHING ROMS/KERNELS/FIXES
This is the fun stuff. This is why you're here. Now that you have root and a recovery, we can get some work done. First, you have to select a ROM that you want. Always pick a ROM that is designed for the Epic. ROMs designed from other phones can and will brick your phone!
You can find ROMs for the Epic in the Epic 4G Android Development section of XDA. Do some research to each ROM to make sure it's what you want. If you want a kernel, make sure your ROM supports other kernels and that the kernel supports your ROM.
Once you've picked your ROM, put it on the root of your sd card and then boot into Clockwork Recovery using your method of choice, then:
1. BACKUP. I seriously cannot stress this enough.
2. Wipe everything. Factory reset and clear cache.
3. Go to “Flash zip from SD card”
4. Choose zip
5. Choose “Yes”
6. Let it run
7. -OPTIONAL- To ensure it worked, repeat steps 2-6. This is just to make sure everything worked. Problems with this can be intermittent and this helps to avoid them.
8. Reboot.
3.0 – ERRORS
Stuff goes wrong. You have to understand, EVERYTHING in this is experimental. The devs here do not have access to EVERYTHING that is required to make these phones work and have to guess at some things and, basically, just do their best (And their best is pretty damn good!).
Basically, just be sure you have backups that you can restore from, and this will all be fine.
3.1 – BLACK SCREEN
Oh no! I flashed ROM X and now my phone won't boot and I hate everything!!!
Worry not! As long as you can boot in to recovery, you have nothing to fear. Just restore the backup that I told you to make and you're back in business. Easy fix.
3.2 – CONSTANT FORCE CLOSES
You boot up your phone and are immediately greeted with force closes. Chances are that you didn't wipe OR that the ROM you're using isn't ready for show time. Again, just restore your backup from Clockwork.
3.2 – CAN'T GET TO RECOVERY, CAN GET TO DOWNLOAD MODE
Well, looks like you'll be returning your phone to stock using Odin. Read later on in the guide how to use Odin in the section about Odin.
3.4 – PHONE WON'T TURN ON AT ALL
Welcome to bricksville, population you. Sorry, but you're phone is a $500 paperweight... Probably shouldn't have flashed that GSM ROM, huh? Not even Odin can save you at this point...
4.0 – THE ANDROID SDK AND ADB
The Android SDK (Standard Developer Kit) is a tool freely available to everyone. You can find it here and it is available for Linux, Mac, and Windows.
4.1 – INSTALLING THE SDK
So, the first step is going to be how to install the SDK on your system. I have experience with Linux and Windows, so that's what I have for now. If someone with a Mac can help write the set up instructions for that, I'd be very appreciative.
4.1.1 – Windows
First, download android-sdk_r07-windows.zip from here to your Desktop. Once it has downloaded, double-click the file and extract it to the root of your C:\ drive (this is optional, but it will make things a lot easier in the future). Rename the extracted folder “android-sdk-windows” to just “android” to make your life easier.
Open the new folder, then run the SDK Manager. If you run into an error about Java, go to java.com and get the latest version of the Java JRE (pretty much just click whatever the biggest “download” button is that you first see).
Once you have the SDK open, it will ask you to install packages. Just tick the “Accept All” radio button on the bottom right and press install. Depending on your internet connection, this can take a long time. Just be patient. Once they are all installed, you're good to go.
How you use adb is simple. Open a command prompt (press the Windows key + r and type “cmd” in the box that shows up, or go to Start → All Programs → Accessories → Command Prompt) and type in “cd C:\android\tools\” and type your commands (list of common commands at the end of this section.
-OPTIONAL- This step is optional, but HIGHLY recommended. Now that we have the SDK set up, we're going to adb to the Windows paths so that you can use adb from anywhere you can open a command prompt.
First, click the start menu and then right-click “My Computer” (Just “Computer” in Vista and 7. You'll also need to click the “Advanced System Setting” on the left side of the window that appears.). Click “Properties” and the Properties window appears. Now, click on the “Advanced” tab and the the “Environment Variables” button. A new window appears with two scrollable boxes. In the lower box, scroll until you find a “path” option and select it. Click “Edit” underneath the box. Move your cursor to the very end (Press END on your keyboard, just to be safe) and type “;C:\android\tools\”” (That leading semi-colon is important and may already be there. Check to be sure).
And you're done! Open a command prompt and type “adb devices” and see what comes up. If a list of devices (phones; will be empty if your phone isn't connected in debug mode) comes up, you've succeeded! Congrats.
4.1.2 – Linux
I use Ubuntu personally, but most of this information should be universal. If anyone running anything else sees anything missing or wrong with other distributions, let me know and I'll update or fix it.
First, you need to acquire the SDK. The file is android-sdk_r07-linux_x86.tgz from this site. Once downloaded, extract the contained folder to your home folder (/home/*USERNAME*, using your username) and rename the folder “android' for later ease of use.
Use terminal and cd to the android folder your created. Use the command “tools/android update sdk” to make the SDK updater come up. Just tick “Accept all” in the bottom right and then click install. This can take a while depending on your internet connection.
Once you have all of the files installed, you're ready to use adb. Using terminal, navigate to /home/user/android/tools and type (For Ubuntu):
Code:
sudo chmod 777 adb
This will allow the adb file to be read as an executable. Note that this only has to be done once. Then, use this code:
Code:
sudo ./adb start-server
(replace 'sudo' for 'su' for distros other than Ubuntu)
This is necessary every time you use adb (in Ubuntu, at least). You only have to do it once per session, but if the adb process is ever killed during your session, you must do it again. I've just gotten into the habit of doing it every time I log into my computer. You could also create a boot script that does this for you... which I've been meaning to get around to. After you have the process running, you won't have to use su/sudo or ./ to use adb.
Note that one-click scripts written for Windows will have to be opened and run manually. There are scripts for Linux floating around, but I can't seem to find the thread.
-OPTIONAL- This isn't a needed step, but you'll probably want to do it. Here we're going to add adb to the paths folder so that after you have started the process as an administrator, you can run it from any folder.
Open terminal and use these commands:
Code:
echo $PATH (should return the directories associated with $PATH)
export PATH=$PATH:/home/user/android/tools (replace with path to your tools directory, you may need to add 'sudo' or 'su' to the beginning of this cmd)
echo $PATH (you should now see your tools directory added to the end of the $PATH variable)
Once done, you're set. Once you have the process started, you can run adb commands from any terminal window.
4.1.3 – Mac OS
-I don't own a Mac, never have, and I have zero experience with Mac and Android... If someone else can help with this section, I'd appreciate it -
4.2 ADB COMMANDS
This isn't a complete list, but it should be enough to get you by for your purpose.
adb shell – opens a terminal on your phone. Terminal is like the command prompt of Linux.
adb push – pushes a file to the phone. The syntax is ”abd push *file location on your PC* *Location you want it on your phone*”
adb pull – pulls a file from your phone. The syntax is “adb pull *file location on the phone* *location to be placed on your PC*
adb shell rm – deletes a file from your phone. The syntax is “adb shell rm *location and name of the file to be deleted*. NOTE: adb shell rm -r is a recursive deletion and can cause damage to your ROM and phone. Make sure you know what you are doing if told to do an rm -r.
adb devices – lists all connected Android phones.
5.0 - ODIN
(I don't have a ton of experience with Odin, so if someone can refine this section, let me know and I'll update it)
Odin is a tool that was created for previous Samsung phones. It is a powerful tool and very useful for saving your phone from many malfunctions. As long as you can boot your phone into download mode (Hold down the “1” key on the slide-out keyboard while powering the phone on) you can almost always save your phone.
That said, Odin is also fairly experimental in its implementation on the Epic. There have been several reports of failed flashes and intermittent errors. This guide will hopefully help prevent that from happening.
5.1 – SETTING IT UP
If you haven't already, you need to get the drivers for the phone. Install them BEFORE Odin and before connecting your phone to your computer. You can get them here:
32-bit: Click here
64-bit: Click here
After that, you're going to need to get Odin. You can find that, as well as a basic guide and the stock files from noobnl, here (External link to SDX). Odin is the .rar file from the first link fo the post.
5.2 - USING ODIN
After you have it downloaded, extract the files somewhere (I recommend a folder on your desktop). From the extracted files, double-click “Odin3_v1.0.exe” and the Odin window opens. Have it completely ready to go before connecting your phone. Put all your files in the spots they belong (refer to the post where you got the Odin files for instructions on that... it seems to vary a lot depending on the purpose). Make sure that no other check boxes are ticked besides “Debug En.” and “Auto-reboot”. All the others can have very negative effects.
Before connecting your phone, put it into download mode by holding down the “1” key on your slide-out keyboard while powering the phone up. Once it is in download mode, connect the phone. The first box in Odin should come up as something akin to “COM4”. If it doesn't say exactly that, don't worry. Make sure all your files are placed correctly, and then click “Start”. It should take up to a few minutes, so be patient. Cutting this process off early can have negative effects. When it is finished, the phone should reboot.
6.0 – CLOSURE
I hope this guide helped you. If you have any questions, you can contact me, but I can't guarantee I can help you. Most devs are willing to help, too, so you can shoot them a PM and they'll try to get back to you.
Good luck and happy flashing!!
[Update Log]
*10-5-2010 - Added sections for Odin and adb/Android SDK. Updated sections, fixed typos and mistakes, reorganized a little. Fixed links.
None of those links are working for me. I get sent to a page with a message saying "Sorry, we can't find "xn--http-fb7a". We suggest that you check the spelling of the web address or search above."
Thanks a bunch, this was a very useful tutorial on the basics and for me helped out greatly with understanding where and what you need to do to be getting the best out of these awsome phones!
blasted across the interwebs by the Epic 4g!
Lonewuhf said:
None of those links are working for me. I get sent to a page with a message saying "Sorry, we can't find "xn--http-fb7a". We suggest that you check the spelling qof the web address or search above."
Click to expand...
Click to collapse
Weird. I just went through and checked them all and everything is working on my end. All the URLs are correct. Maybe try clearing your browser cache?
DevinXtreme said:
Weird. I just went through and checked them all and everything is working on my end. All the URLs are correct. Maybe try clearing your browser cache?
Click to expand...
Click to collapse
None of them work for me either. The urls all start: http://xn--http-fb7a//forum.xda-developers.com/
dwyw42 said:
None of them work for me either. The urls all start: http://xn--http-fb7a//forum.xda-developers.com/
Click to expand...
Click to collapse
That is so weird... It's showing up like that for me now, too. I've checked the source, and it stills is showing the right links in my post.... It's something on XDA's end right now... I'll look into getting it to work a little later.
Good work! This should be a sticky!
Sent from my Epic 4G
dwyw42 said:
None of them work for me either. The urls all start: http://xn--http-fb7a//forum.xda-developers.com/
Click to expand...
Click to collapse
yeah same here, i just cleared everything before "forum" from address bar and page loaded.
You might wanna ad that you need done battery life when flashing a kernal. If your phone dies during the flash your phone will be a useless brick.
You might also wanna adds the odin steps for flashing back to stock
Sent from my SPH-D700 using XDA App
mysteryemotionz said:
You might wanna ad that you need done battery life when flashing a kernal. If your phone dies during the flash your phone will be a useless brick.
You might also wanna adds the odin steps for flashing back to stock
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Unless whatever you're flashing messes with the recovery partition, an incomplete flash shouldn't cause a brick. As long as you can boot to recovery or download mode, you can save your phone.
And I'm working on an Odin section for my next update to this. A lot of things will be added next time I update the main post.
Sent from my SPH-D700 using XDA App
i've got the first part of your guide done by completing noobnl's method but i cant get koush's method down. you say to hold down the volume, camera, and power buttons to boot into clockwork recovery, but it seems like it goes into the stock samsung recovery? how do i get the clockwork recovery?
The link for noobnl's easy method always takes me to Koush page not noobnl's might want to check your links there.
but very great idea and should be sticked on the front page.
dsummey30 said:
The link for noobnl's easy method always takes me to Koush page not noobnl's might want to check your links there.
but very great idea and should be sticked on the front page.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=770388
for the proper thread
^^^ I have the same problem he did: I followed the instructions to root, but when I tried to restart with the "Epic 3-finger salute", it went into what appeared to be the stock bootloader, not clockwork.
Sent from my SPH-D700 using XDA App
bitbang3r said:
^^^ I have the same problem he did: I followed the instructions to root, but when I tried to restart with the "Epic 3-finger salute", it went into what appeared to be the stock bootloader, not clockwork.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Same with me. I selected "Flash ClockworkMod Recovery" and after a number of tries it was successful. Yet when I boot with the 3 buttons it still goes into the stock recovery.
you might wanna add how to set adb
Spunkzz said:
i've got the first part of your guide done by completing noobnl's method but i cant get koush's method down. you say to hold down the volume, camera, and power buttons to boot into clockwork recovery, but it seems like it goes into the stock samsung recovery? how do i get the clockwork recovery?
Click to expand...
Click to collapse
bitbang3r said:
^^^ I have the same problem he did: I followed the instructions to root, but when I tried to restart with the "Epic 3-finger salute", it went into what appeared to be the stock bootloader, not clockwork.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Vanquish46 said:
Same with me. I selected "Flash ClockworkMod Recovery" and after a number of tries it was successful. Yet when I boot with the 3 buttons it still goes into the stock recovery.
Click to expand...
Click to collapse
I think I know the issue here. It's that /system/ isn't being mounted as rw. Run the jokeyrim root method and then go into adb and type this:
Code:
adb shell
su
remount rw
exit
exit
If you don't know how to use adb, just wait until a little later tomorrow. I've got a whole section about it to add to the guide, but I don't have it completed yet (did some work on my laptop in the middle of writing it, forgot to reconnect my WLAN card and was baffled for most of the day...)
dsummey30 said:
The link for noobnl's easy method always takes me to Koush page not noobnl's might want to check your links there.
but very great idea and should be sticked on the front page.
Click to expand...
Click to collapse
Sorry about that. Should be fixed now. Thanks for pointing it out
mysteryemotionz said:
you might wanna add how to set adb
Click to expand...
Click to collapse
All in the works I expect to have the guide updated early tomorrow, if not tonight.
Updated the guide with a lot of new info. Two new sections for adb/the SDK and Odin as well as a general update to the whole thing. Some of the sections changed (HARD and EASY mode are now both required, unfortunately...) and some things got a little moved around.
Also, all of the links should now work correctly. Something about the way XDA was handling quotations... So I just stripped them all from the forum code stuff...
If anyone has any experience with Mac, I could use your help for the adb/SDK section, and I could also use some help from someone more experience with Odin for that part.
Thanks, guys! I really hope this guide helps some people.
not to be a pain Devin but the two links for noobnl's programs goes to the same page for the easy and hard method don't know if that's right or not but wanted to point it out to you.
Thanks again for the great guide.
David
Apologies if this is already answered somewhere or should have been common knowledge - I'm new to Android. I feel like I've read through all the appropriate threads but haven't found the answer.
I wanted to simply remove some of the stock apps from my G2X. I can't get adb connected while in CWM recovery. I've done the following:
- Installed android sdk
- Installed LG adb driver
- Rooted with SuperOneClick
- Installed Rom Manager from the market and "fake" flashed ClockworkMod Recovery
- Booted into CWM and made a nandroid backup
- Factory reset using stock recovery
- Restored nandroid backup using CWM - works fine
Now, I believe all I need to do is get adb connected in recovery mode, mount /system and delete any .apks I don't want; however, the adb device is not present when I boot to CWM recovery. adb works fine when booted normally. As a result, I obviously can't start adb shell. Oh, and I've tried this from XP 32bit and Win7 x64. What am I missing?
Did I need to flash CWM to the actual recovery area using NVflash for this to work? I'd rather not do this for warranty purposes (especially this soon) unless absolutely necessary. Incidentally, the other USB devices (virtual serial port, modem, and storage devices) do show up while in recovery - just not the adb device.
I'm open to other methods of stripping .apks. I don't yet know anything about modifying and repackaging a nandroid backup, if that's possible, or I would try that route.
Any guidance would be greatly appreciated.
Thanks!
EDIT: I've resolved my particular issue by just remounting /system as rw while the phone is booted normally. This still doesn't answer the CWM adb question, but at least for now, I guess I don't need that.
I believe you can just use Root Explorer (or another type of file manager) to delete or freeze the apps that you do not want. Not sure if this belongs in development.
This will be moved soon enough, and you didn't search enough since i know there is threads talking about this. Do a search again. mod plz move this to the right area.
Maybe a freeze is one way to go, but obviously a cleaner way is remove the apps, which should be possible with this method and others.
I did search - a lot - in this forum and others. I found no one directly addressing adb not working in CWM on the G2X. I saw one poster here mention they had a similar issue, but only on XP and no one responded to that either. If you know of a thread with this information in it, please enlighten me.
Maybe this isn't the right forum to post in, but the question is directly about CWM flashed to a rooted G2X and access using adb...
I just use titanium backup's Chuck Norris Mode.
I've resolved my particular issue by just remounting /system as rw while the phone is booted normally. This still doesn't answer the CWM adb question, but at least for now, I guess I don't need that.
Root Explorer is your best friend, a simple delete is all you need, make sure you mount before entering system
davemayo2000 said:
I've resolved my particular issue by just remounting /system as rw while the phone is booted normally. This still doesn't answer the CWM adb question, but at least for now, I guess I don't need that.
Click to expand...
Click to collapse
Haha, plenty of answers, none of which answer your main concern. I too have been mystified by the lack of adb functionality while in recovery. I have come to the conclusion that it's simply not functional with this very early version of clockwork recovery for our phones and probably not a high priority for the devs at the moment as theres probably plenty of other issues deemed more urgent. Especially considering there are many work-arounds to solve this particular missing function. Hopefully I'm wrong though.
Sent from my LG-P999 using XDA Premium App
To outline my situation, I have installed CWM to my phone, and flashed version 2.5.1.2 of Galaxy S i9000 (but the recovery boot doesn't show as CWM) on a Samsung InFuse 4G (this part I managed to find by scouring the forums) with Firmware version 2.2.1, Kernel 2.6.32.9, with Build FROYO.UCKH1. This is as far as I have gotten because I cannot seem to get a backup of my phone's ROM made. So, my question is can someone explain (without jargon, I haven't quite learned it yet) in simple steps how to resolve this issue and help me continue my way to flashing a custom ROM? I've checked and read so many other guides, but they are confusing because the steps aren't (sad to say) dumbed down for me. Here's an example of what I read:
1: dl CWM (actually had to go look this up and figure out what it was)
2: flash CWM (my phone model wasn't on the list, but after an extensive search found out that I could use the Galaxy S i9000 [supposedly])
3: boot into CWM Recovery (can't do it, for some reason it won't load on my phone.)
4: perform backup with CWM (as before, can't do it, read I could use Titanium backup but no depth was given)
5: dl a rom and place it on your sd card (this one is understood, short and to the point)
6: boot into CWM and flash rom
Unfortunately, when I start out on a new OS (already owning Windows and getting good at Linux) I tend to not even understand these so-called "Dummies Guides." I need something filled with minimal jargon that is short and sweet. Any information would be helpful
Also, I would like to know the likelihood of bricking my phone (based off of its specs) if it is possible to find out...
I'm a little bit confused here. How come you've flashed an i9000 (Galaxy S) firmware onto an Infuse? I think we can work out your backup problems though
I mean that I flashed the Galaxy S i9000 version of CWM Recovery to my phone because there wasn't an InFuse option. (according to one thread, it said that the i9000 version was compatible with the InFuse)
However, I flashed the Recovery, but when I booted into recovery mode, I was still in the stock recovery. Any explanation for this and everything else?
I don't really know anything about the Android system yet, but I hope to be good enough to become a developer one day.
DeltaOps said:
I mean that I flashed the Galaxy S i9000 version of CWM Recovery to my phone because there wasn't an InFuse option. (according to one thread, it said that the i9000 version was compatible with the InFuse)
However, I flashed the Recovery, but when I booted into recovery mode, I was still in the stock recovery. Any explanation for this and everything else?
I don't really know anything about the Android system yet, but I hope to be good enough to become a developer one day.
Click to expand...
Click to collapse
Gotcha. Sounds like the recovery hasn't flashed properly. Did you have the phone rooted before flashing the recovery?
Here is an awesome thread with video guides on just about everything you could need. Here is another. I take it you've already followed at least one of these to get the recovery flashed, so it might pay to try the 3E recovery instead and see if that works.
You may need to go right back to stock and start over. If you do, AdamOutler has got you covered right here.
I'll stay subscribed in case you need anything else, best of luck mate
My phone was rooted with SuperOneClick. Superuser was still intact. I read on a thread that the CWM Recovery could "fake flash" and that it would still be accessible by selecting "boot into recovery" but it doesn't show.
It says 3E in my recovery mode, is that the modified or is it actually stock?
I downloaded CWM from the market (method 2) but for some reason have update.zip on my phone (method 1). Any explanation? I don't exactly remember downloading a .zip file...
DeltaOps said:
My phone was rooted with SuperOneClick. Superuser was still intact. I read on a thread that the CWM Recovery could "fake flash" and that it would still be accessible by selecting "boot into recovery" but it doesn't show.
It says 3E in my recovery mode, is that the modified or is it actually stock?
I downloaded CWM from the market (method 2) but for some reason have update.zip on my phone (method 1). Any explanation? I don't exactly remember downloading a .zip file...
Click to expand...
Click to collapse
It may have 'fake flashed' and not worked at all. Both stock and modified recovery will say 3E, the difference is in the version numbers although I can't picture them off the top of my head. If CWM had worked, you would not be seeing 3E, you would see the typical array of CWM options. The modified 3E does not give you the same options CWM does, it just gives you the option to flash an 'unsigned' image from Recovery.
I have never had any luck with ROM Manager personally, although a lot of people swear by it. I found it especially flaky flashing recoveries to any device, very hit-and-miss. I personally prefer, and recommend, flashing recoveries manually via ADB. A little trickier, but a lot more trustworthy.
That said, try flashing recovery through RM again before taking any further steps. Flashing a recovery over a recovery won't hurt
I've tried three separate times to install the CWM recovery, but all were unsuccessful. What's this about ADB? I remember seeing the ADB Daemon in the SuperOneClick rooting process. And how tricky is it exactly, does it require code?
I have the Titanium Backup app on my phone, and I have backed up all the system and app data, but they are all separate files instead of a single (what, .md5?) file. I remember reading another thread that said you could back up a ROM via TB but I can't find a back up ROM option. Is there a particular way to do this or do I have to have the Premium/Pro version of TB? Or have I pretty much done all I can do with TB?
DeltaOps said:
I've tried three separate times to install the CWM recovery, but all were unsuccessful. What's this about ADB? I remember seeing the ADB Daemon in the SuperOneClick rooting process. And how tricky is it exactly, does it require code?
I have the Titanium Backup app on my phone, and I have backed up all the system and app data, but they are all separate files instead of a single (what, .md5?) file. I remember reading another thread that said you could back up a ROM via TB but I can't find a back up ROM option. Is there a particular way to do this or do I have to have the Premium/Pro version of TB? Or have I pretty much done all I can do with TB?
Click to expand...
Click to collapse
ADB is a command-line interface between your PC and your phone. You enable USB debugging and connect the phone via USB to the computer. Once you have the correct drivers installed, you can then use ADB (part of the Android SDK available for download) to send commands to your phone, as well as push and pull files. This requires full root, which you already have.
For example you can grab the recovery.img for CWN on the Infuse and tell ADB to 'flash recovery recovery.img' and actually ensure it flashes.
There are some excellent ADB tutorials floating around, this one in particular got me started. Make sure you do a bit of reading first though: the wrong command can royally screw you.
After you're familiar, you should be able to use ADB to push a recovery to your phone, whether it be unsecured 3E, or CWM.
I'll stay subscribed for any queries you may have
How close is the ADB interface to other command-line interfaces like Linux or Windows? I use both operating systems on my laptop and I have familiarized myself with both of them (mostly). What am I supposed to be expecting when I use it? Also, I can't seem to find the recovery.img file, what folder would that be under?
DeltaOps said:
How close is the ADB interface to other command-line interfaces like Linux or Windows? I use both operating systems on my laptop and I have familiarized myself with both of them (mostly). What am I supposed to be expecting when I use it? Also, I can't seem to find the recovery.img file, what folder would that be under?
Click to expand...
Click to collapse
Don't know about Linux, but ADB works through a Windows command prompt so its pretty much the same. You will need to have ADB, Fastboot plus whatever you wish to flash (recovery.img) in a 'working' directory, then run a command prompt from that directory.
You will probably need to download the recovery.img file.from XDA. It may be zipped up (they usually are).
Sent from my Galaxy Note using XDA Premium
I've successfully got ADB started in the command prompt (not that bad :]) but when I try to pull the directory map from my phone, it says: remote object "xxxxxxxxx" does not exist. And what's this about Fastboot? Edit: Did a bootloader command test, worked just fine. No success on pulling directory
Command I used: "adb pull -s xxxxxxxxxxx C:\"
DeltaOps said:
I've successfully got ADB started in the command prompt (not that bad :]) but when I try to pull the directory map from my phone, it says: remote object "xxxxxxxxx" does not exist. And what's this about Fastboot? Edit: Did a bootloader command test, worked just fine. No success on pulling directory
Command I used: "adb pull -s xxxxxxxxxxx C:\"
Click to expand...
Click to collapse
I don't think that's the correct format to pull directory structure. I'll have to read up on that one
Fastboot is another tool you can use to flash bootloaders, radios, recoveries etc through the command prompt.
Sent from my Galaxy Note using XDA Premium
You're right, tried using the <remote> variable as a file instead of the device serial. Typed:
adb pull .. files
prompt skitzed out after that. I know it won't damage anything since it's a copy procedure but I'm looking for the file and it's not there. it said it's pulling everything after skipping "special files"
Edit: It just finished, said it couldn't create the file because for some reason it was trying to copy the files from the phone to the phone
DeltaOps said:
You're right, tried using the <remote> variable as a file instead of the device serial. Typed:
adb pull .. files
prompt skitzed out after that. I know it won't damage anything since it's a copy procedure but I'm looking for the file and it's not there. it said it's pulling everything after skipping "special files"
Edit: It just finished, said it couldn't create the file because for some reason it was trying to copy the files from the phone to the phone
Click to expand...
Click to collapse
Yeah, you'll have to give it a target directory, I think it's like this '.\sdcard' to write them to the SD card?
Sent from my Galaxy Note using XDA Premium
If that's the case, then how do I make the file copy to my HDD? The drive doesn't show up on my computer (does it)?
DeltaOps said:
If that's the case, then how do I make the file copy to my HDD? The drive doesn't show up on my computer (does it)?
Click to expand...
Click to collapse
I'm sure that with the correct command, you will be able to pull the structure to your hard drive. I'm not sure if it's .\C:/ or not, I'll have a look when I'm on a proper rig and can do a proper search
Sent from my Galaxy Note using XDA Premium
Thanks! You've been great so far
That noob video was right, XDA is full of awesome people!
Edit: Got it Thanks for the pointers. Now I need to find out how to back up the entire ROM... :/
DeltaOps said:
Thanks! You've been great so far
That noob video was right, XDA is full of awesome people!
Edit: Got it Thanks for the pointers. Now I need to find out how to back up the entire ROM... :/
Click to expand...
Click to collapse
Glad you got it and glad to help. There are a hell of a lot of good people here If there's anything else you need, feel free to PM me.
Good luck buddy!
Sent from my Galaxy Note using XDA Premium
Is there perhaps any way to perform a ROM backup with ADB?
DeltaOps said:
Is there perhaps any way to perform a ROM backup with ADB?
Click to expand...
Click to collapse
Ooh good question. I don't think so, but I'm not sure. I know you can pull directories like /system/ and whatnot, but as for repackaging them into a working backup, that may be a bit more involved. I would use ADB to.push a working CWM and do it that way, but it sounds.like you're a bit better at the command-line stuff than I so you may be able to work it!
Sent from my Galaxy Note using XDA Premium
As we now have functional recovery options on our tablets, and people will inevitably mess things up with their device, we need to get a way to get your tablets back to factory condition. But I need your help with this!
What do you want?
Here's my idea: We have all seen various ZIPs floating around, most of them leaked from somewhere. The problem with these is that you can't use OTA updates, and I'm not sure what Acer Service Center thinks of custom ROM installs. What I want is to build a list of software that is officially distributed by Acer, is OTA-updateable, etc. For this reason, I want people that have not yet modified their tablets (except root) to provide image dumps of their /system, /boot, /flexrom, and /recovery partition. It's really easy to do, and you'll help yourself and others when they get into trouble.
Can I help?
Answer all of the following questions. If at one point the answer is "Sorry, you can't help", well... You can't help
Is your device unlocked and rooted? Yes - You can help! / No - You can still help, but you need to unlock and root your device.
Do you have the original Acer ROM installed on your device? Yes - You can help! / No - Sorry, you can't help
Have you received the latest OTA updates for your device? Yes - You can help! / No - You can help as well!
Have you removed any apps or files from the /system or /flexrom partition? Yes - Sorry, you can't help / No - You can help!
Have you installed a custom recovery image? Yes - You can still help, as long as everything else is still original / No - You can help!
Okay, so I can help, now what?
If you can and are willing to help (remember, it could save your own ass one day), follow the instructions below. If you get stuck or simply don't know where to start but are willing to help, let us know in this thread and I'm sure we can all help eachother out.
This will not gather any personal data from you. Personal data is stored on the /data partition, which we don't need, so: No worries!
Root your device, if you haven't already.
Connect your tablet to your computer via ADB
Type the following command: adb shell. You are now logged into your tablet. You can exit at any time by typing exit and hitting ENTER.
Type the following command: dd if=/dev/block/mmcblk0p2 of=/sdcard/boot.img. This will copy your /boot partition to a file called boot.img on your internal storage. This one will be fast, it only has about 8MB to copy.
This step can be skipped if you have a custom recovery! Type the following command: dd if=/dev/block/mmcblk0p1 of=/sdcard/recovery.img. This will copy your /recovery partition to a file called recovery.img on your internal storage. This one will be fast as well, it only has about 6MB to copy.
Type the following command: dd if=/dev/block/mmcblk0p3 of=/sdcard/system.img. This will copy your /system partition to a file called system.img on your internal storage. This one will take a bit longer, it has about 360MB to copy.
Type the following command: dd if=/dev/block/mmcblk0p6 of=/sdcard/flexrom.img. This will copy your /flexrom partition to a file called flexrom.img on your internal storage. This one will take a bit longer as well, it has about 360MB to copy.
Type exit to exit the ADB shell. Copy the four .img files from your tablet (internal storage) to your computer. You might have to reboot your tablet if the files don't show up.
ZIP or RAR these files, and upload them somewhere. If you can't find a place to store them: send me a private message or reply in this thread and we'll arrange something else. If you have uploaded the files somewhere: again, send me a private message or reply in this thread.
So now what?
When I receive your files, I will package them into an update.zip that can be flashed from custom recoveries. This will then restore everything (including the custom recovery) to factory state, which can help you in getting your device back to stock.
What versions do you have already?
Acer_AV041_A510_1.044.00_WW_GEN1 (download links will follow shortly)
Acer_AV041_A510_1.098.00_EMEA_CUS1 (download links will follow shortly)
Acer_AV041_A510_1.099.00_EMEA_DE (download links will follow shortly)
The idea sounds great so far. But I have a small problem to make a complete backup for my a511.
Your linked root tutorial for the procedure is only for a100/a510 and doesn't work for a511, as I understand.
The tutorial for rooting the a511 needs first to flash a CWM.
http://forum.xda-developers.com/showthread.php?t=1729432
So it isn't possible for us to backup the recovery partition, right ?
I have the stock Acer_AV041_511_1.028.00_EMEA_DE on my device.
Is it even possible to backup and recover the baseband ?
I'm very interested in your CWM recovery for a511 too, but since many guys f++++d up their device now, I want to make sure that my device will not goes the same way.
i can help, n my tab is rooted.
but i don understand the first step: Connect your tablet to your computer via ADB
What about if we have removed system apps (such as the antivirus that comes with the tablet). It wouldn't be a complete dump if it didn't include those.
I have root and am happy to provide a dump, but I did uninstall several of the crappier pre-installed apps that came with my tablet.
scorpio16v said:
The idea sounds great so far. But I have a small problem to make a complete backup for my a511.
Your linked root tutorial for the procedure is only for a100/a510 and doesn't work for a511, as I understand.
The tutorial for rooting the a511 needs first to flash a CWM.
http://forum.xda-developers.com/showthread.php?t=1729432
So it isn't possible for us to backup the recovery partition, right ?
I have the stock Acer_AV041_511_1.028.00_EMEA_DE on my device.
Is it even possible to backup and recover the baseband ?
I'm very interested in your CWM recovery for a511 too, but since many guys f++++d up their device now, I want to make sure that my device will not goes the same way.
Click to expand...
Click to collapse
Hi, your device will not brick, I can send you a test A511 recovery if you want. Worst that can happen is that recovery won't boot, but in that case you can simply put back recovery. Send me a private message and we can work something out.
scae said:
What about if we have removed system apps (such as the antivirus that comes with the tablet). It wouldn't be a complete dump if it didn't include those.
I have root and am happy to provide a dump, but I did uninstall several of the crappier pre-installed apps that came with my tablet.
Click to expand...
Click to collapse
Then it's of no use, unless you have a backup of your pre-installed apps. Removing apps from the /system or /flexrom partition is not recommended, and you gain nothing by it: You only gain space on read-only filesystems which you won't use in 99% of situations, and you've now broken OTA's for yourself as well, as OTA's will only install when apps are present unless you start modifying OTA files.
The 'correct' way to get rid of pre-installed apps is simply freezing them, either from the settings menu or with an app like Titanium Backup. This will make it seem like they're not there (so they don't use resources at all), but the APKs don't get removed.
So unfortunately, we can't use your dumps to restore devices to factory state. Unless, ofcourse, you've made a backup of the apps somewhere.
skymario said:
i can help, n my tab is rooted.
but i don understand the first step: Connect your tablet to your computer via ADB
Click to expand...
Click to collapse
Do you have ADB or the Android SDK installed?
NoThrills said:
Do you have ADB or the Android SDK installed?
Click to expand...
Click to collapse
I just learned ADB, n successful install ur CWM, later will try to dump my stock Rom to u.
My stock Rom version 1.073 ww gen1
does it matter if the system apps have been frozen or do they need to be unfrozen first?
I have flashed that remove stock recovery mod so the stock rom doesn't keep overwriting cwm on reboot. Does that disqualify me? If not I'll dump my rom for you when I get home.
I'm on this rom version:
ro.build.pandora.id=Acer_AV041_A510_RV28RC04_PA_CUS1
ro.build.flexrom.id=Acer_AV041_A510_1.076.00_PA_CUS1
I unlocked bootloader,rooted,installed cwm then backed up my stock rom.Could i restore my stock rom then be able to send you those fills
and return to total stock.
NoThrills said:
Hi, your device will not brick, I can send you a test A511 recovery if you want. Worst that can happen is that recovery won't boot, but in that case you can simply put back recovery. Send me a private message and we can work something out.
Click to expand...
Click to collapse
i think he mean that the a511 recovery doesn't work properly....you can flash a zip, but nearly all other options brick the device
i have a a511 too with Acer_AV041_A511_1.028.00.EMEA_DE and can help with testing or something else
I have Acer AV041_A510_1.079.00_PA_CA. (Canada)
I have not done a thing to it because it is a replacement for the Galaxy Note I bricked trying to upgrade from GB to ICS, too early.
I might try again if I was sure I could get back to where I am, using your process.
I assume that your Root link is comprehensive but I also need reassurance on how to ADB.
[email protected]
Sent from my A510
blgblade said:
i think he mean that the a511 recovery doesn't work properly....you can flash a zip, but nearly all other options brick the device
Click to expand...
Click to collapse
No, as I understand, the only working methode to root the a511 is to bootloader unlock, flash the custom recovery and then the root.zip.
Maybe I'm wrong and there is another working way to root the device ?
The problem is simply, that we lost the stock recovery before we have a backup from it.
If we have another root way for a511, the backup of stock firmware is done in a few minutes and from this point we can test the a511 custom recovery from NoThrills.
To the A511 owners: Technically, if you have a install-recovery.sh file on your device, the device will always flash recovery back from the boot.img.
In theory: To test, one could simply overwrite the stock recovery with my Recovery (not the other ones, they will brick your device) and then when you reboot, your device will overwrite the recovery with the stock one again. So you really don't need a backup of the recovery partition.
As long as you don't let your device fully boot (so, stay in recovery) there's plenty of time to test if the recovery works or not. If it doesn't, simply reset your device and it will flash back the original recovery (again: provided there is a install-recovery.sh in your /system partition).
So again, if anyone is willing to test, let me know
NoThrills said:
To the A511 owners: Technically, if you have a install-recovery.sh file on your device, the device will always flash recovery back from the boot.img.
Click to expand...
Click to collapse
I can't find a install-recovery.sh in /system partition on my a511. Search on root-explorer can't find one on the device.
Even NOT on /system/etc like on other devices.
NoThrills said:
So unfortunately, we can't use your dumps to restore devices to factory state. Unless, ofcourse, you've made a backup of the apps somewhere.
Click to expand...
Click to collapse
Ah damn, I did back them up via titanium but it doesn't seem to want to restore them - it just sits there say restoring app.
scorpio16v said:
I can't find a install-recovery.sh in /system partition on my a511. Search on root-explorer can't find one on the device.
Even NOT on /system/etc like on other devices.
Click to expand...
Click to collapse
Yeah, I meant /system/etc... That's weird, I'd figure Acer would use the same system on the A511... Let me check one of the leaked ROMs...
Hello,
I have an stock Acer_AV041_A510_1.098.00_EMEA_CUS1, there we go for the files
Host file is not the stock version, it was edited by AdAway.
Can you make a version without recovery overwritting ?
I thinks a lot of people want to try some roms... just for testing...
Acer_AV041_A510_1.098.00_EMEA_CUS1 boot && system && flexroom:
http :// dl.free.fr/jDEmTNSD4
Have Fun
Hello,
I have the same rom without root or unlocked bootloader or moded recovery so if the above on does not make it I'll upload mine.
Sent from my A510 using xda app-developers app
PreambleI oft find in various forums that people are so filled with the milk of human kindness that they just can't wait to help, ( or may gain a few more badges~) ignoring everything but the heading.
And in doing so ask foolish questions.
So, please DO READ to the end.
UPDATE
Thanks to @ jwoegerbauer I now know I can't install the Lantern APK via recovery. I must use ADB which I have previously tried but failed.
Obviously, therefore I do not know what I am doing with ADB.
My tasks focus now is to install Lantern APK via ADB with the devices , tools and systems already mentioned. (below)
Unless someone, somewhere knows where I can find a Lantern ZIP file which I can flash. (seems I am good at that now at least~)
Please DO read everything below ladies and gents, my sense of humour and patience does have a limit~
Mobile Device DetailsSamsung note 3 originally 9006 Chinese ROM
Rooted via Odin to 9005
Upgraded to Lineage ROM 18
Uploaded pico Gapps
Uploaded Magisk v23
Desktop Machine
Asus P5BSE / Core2 Duo E4400 @ 2.00GHz / 4GB ram / 2TB storage / Linix; Zorin Core 15.3
Project in briefTo install Lantern. (getlantern.org)
Lantern is usually installed via Google play store.
Google is blocked in China.
Downloaded Lantern APK to upload to phone via recovery from SD card.
Recovery does not show the APK in the SD card.
Stuck.
Further info - useful?During one of my many attempts to install Lineage following a blog, I wiped the disk in error.
I also suspect I removed the backup of the original Samsung system as when I tried to reboot, TWRP mentioned there was no O/S.
Nothing I could do restored the original.
What was it Macbeth said about being in blood stepped so far?
On my final install of Lineage 18 I seem now to have their Recovery, not TWRP.
I am happy with that, seems no big deal for me, I was able to successfully install the new OS + Gapps. And it is one less APP to install
I also have Magisk installed, the device is in dev mode and - seemingly rooted. (although the App does not explicitly say so)
Using a borrowed SIM card I can connect to the China mobile network system.
I now have a fully functional, working , English language device with Lineage 18.
Brilliant!
My last task is to figure out how to get the Lantern App sorted.
I have downloaded the APK from their official site, several others as well as a supposedly zip file.
Saved to SD card, visible when viewed on Linux, invisible when card is installed in mobile.
I really do not know quite how to proceed from here.
If I have missed anything, sorry, please ask.
Huge thanks to RAIZ from this forum for getting me to this stage and the guys who made Lineage 18 so darn easy to install and seemingly impossible to mess up.
And boy oh boy, believe me, I have really tried over the past few months~!
thebic said:
Mobile Device DetailsSamsung note 3 originally 9006 Chinese ROM
Rooted via Odin to 9005
Upgraded to Lineage ROM 18
Uploaded pico Gapps
Uploaded Magisk v23
Desktop Machine
Asus P5BSE / Core2 Duo E4400 @ 2.00GHz / 4GB ram / 2TB storage / Linix; Zorin Core 15.3
Project in briefTo install Lantern. (getlantern.org)
Lantern is usually installed via Google play store.
Google is blocked in China.
Downloaded Lantern APK to upload to phone via recovery from SD card.
Recovery does not show the APK in the SD card.
Stuck.
Further info - useful?During one of my attempts to install Lineage following a blog, I wiped the disk in error.
I also suspect I removed the backup of the original Samsung system as when I tried to reboot, TWRP mentioned there was no O/S.
Nothing I could do restored the original.
What was it Macbeth said about being in blood stepped so far?
On my final install of Lineage 18 I seem now to have their Recovery, not TWRP.
Seems no big deal for me, I was able to successfully install the new OS + Gapps.
I also have Magisk installed, the device is in dev mode and - seemingly rooted. (although the App does not explicitly say so)
Using a borrowed SIM card I can connect to the China mobile network system.
I now have a fully functional, working , English language device with Lineage 18.
Brilliant!
My last task is to figure out how to get the Lantern App sorted.
I have downloaded the APK from their official site, several others as well as a supposedly zip file.
Saved to SD card, visible when viewed on Linux, invisible when card is installed in mobile.
I really do not know quite how to proceed from here.
If I have missed anything, sorry, please ask.
Huge thanks to RAIZ from this forum for getting me to this stage and the guys who made Lineage 18 so darn easy to install and seemingly impossible to mess up.
And boy oh boy, believe me, I have really tried over the past few months~!
Click to expand...
Click to collapse
What recovery are you using? Have you tried different recoveries?
What version of twrp are you running?
An APK will never get installed via Recovery.
You typically install an APK ( sideload method ) by means of ADB.
Code:
adb devices
adb install <FULL-PATHNAME-OF-APK-ON-PC-HERE>
Yeah you could use adb sideload in twrp.
jwoegerbauer said:
An APK will never get installed via Recovery.
You typically install an APK ( sideload method ) by means of ADB.
Click to expand...
Click to collapse
Hehe, I can verify your first statement!
Do you have a link you can direct me to please as to how to do it via ADB in Lineage recovery as I did try that (side loading) via TWRP and it threw back an error. I can't recall but I think it was permissions or similar?
Sorry, I forgot to mention that in my post.
Thx for your constructive feedback - much appreciated.
P
Re-read my cited post: I've edited it.
jwoegerbauer said:
An APK will never get installed via Recovery.
You typically install an APK ( sideload method ) by means of ADB.
Code:
adb devices
adb install <FULL-PATHNAME-OF-APK-ON-PC-HERE>
Click to expand...
Click to collapse
Ohhhhh Kayyyyyy - coping.
Just.
You have added code?
Before I go ahead and destroy New York, I use that where?
How?
and errr... why?
I am guessing in Terminal, but I am not really sure what I am trying to achieve here.
Sorry, not arguing or being difficult, I just find it helps me if I know what EXPECTED outcomes are. Just in case it isn't what I should expect. :>(
Thx for your patience.
p
I think the understandable answer is given here:
adb install - Android ADB Shell Commands Manual
adbshell.com
Of course it's required ADB got installed on Windows computer if not done yet: if not then you may use the installer script linked to in my signature.
jwoegerbauer said:
I think the understandable answer is given here:
adb install - Android ADB Shell Commands Manual
adbshell.com
Of course it's required ADB got installed on Windows computer if not done yet: if not then you may use the installer script linked to in my signature.
Click to expand...
Click to collapse
Thx not so helpful.
I've edited my post with a preamble, please check it when you have time.
Have a nice weekend.
thebic said:
Thx not so helpful.
I've edited my post with a preamble, please check it when you have time.
Have a nice weekend.
Click to expand...
Click to collapse
[email protected]:~$ adb install test.apk
can't find 'test.apk' to install
[email protected]:~$
I seem to be going in ever decreasing circles.
Please help me out- what is protocol.
Do I keep updating my progress - or lack of- here, in this dialogue, or should I continue to update my original post?
Which one best communicates to everyone where I am at?
Cheers
thebic said:
[email protected]:~$ adb install test.apk
can't find 'test.apk' to install
[email protected]:~$
Click to expand...
Click to collapse
You forgot to add the exact file directory.
Keno_I said:
You forgot to add the exact file directory.
Click to expand...
Click to collapse
Did it work after adding the file directory?
You are right.
I am not sure how this forum works, so it was more of a post to jwoegerbauer.
Anyway, even opening the folder with terminal and using adb install lantern-installer failed with a CLOSE error message. I guess that meant close as in shut not closes as in almost!
I can, using Lineageos recovery access ADP on my phone with the instruction: " now send the package you want to apply to the device with "adb sideload <filename>"
However that triggers a screed of data in terminal which, frankly, is well beyond my rudimentary level of comprehension.
I have tried following 3 other on line tuts which suggest using ADB on my computer. All goes well until the instruction: <adb devices> which returns:
$ adb devices
List of devices attached
In other words, computer can't find phone!
I initially tried it in DOWLOAD mode, with the usual "download in progress, do not disconnect source."
Then reading the tuts again, none mentioned download mode so I tried with just the device attached to the machine in normal phone usage mode. Checked that SAMSUNG was visible and I could open the folders but again failed. ( sorry I forget what that error message was)
So far the most positive has been the direct ADB via Lineageos, but I have no idea where to go from there.
It is knocking on 37* here, too hot to think so I am taking a break.
Thx for your latest efforts.
Cheers
P
OK Finally!
[email protected]:~$ adb devices
List of devices attached
438f904d device
[email protected]:~$ adb install /home/bicyu/Sam-upgrade/lantern-installer/lantern-installer.apk
Performing Streamed Install
Success
[email protected]:~$
I have read so many posts all end with the <adb devices> and on each one I see zilch.
So, for anyone else in this boat, here is my solution.
In developer OPTIONS on your LINEAGEos device scroll down to
DEFAULT USB CONFIGURATIONVery likely it is set to FILE TRANSFER - mine was.
Change it to USB TETHERING
Then enter < adb devices> in terminal.
You should then see your Android listed.
Proceed with: adb install <FULL-PATHNAME-OF-APK-ON-PC-HERE>
You should see a SUCCESS flag!
NOTES: This works in Lineageos ROM on Linux, ( Ubuntu / Zorin O/S)
I dunno about others.
You need to have dev options activated.
Change the USB setting back when done, otherwise it tends to mess up your Internet! (did mine anyway!)
This is the best background tut to ADB I found.
He talks about a USB3 bug which, apparently, creates the same problem - maybe THAT is your issue? It was that article which put me on the USB CONFIG train.
Hope this helps someone.
A REALLY HUGE thank you to jwoegerbauer for putting me
on the right track - wrong train, - but right track.
Cheers mate!
Glad to hear you solved it.
Only to have mentioned it, there is a workaround - as always because many ways leads to Rome:
Copy the APK of interest onto MicroSD-card, plug the card into phone, afterwards using any File Manager application that is installed on phone, navigate to the location on MicroSD where the APK file is located and finally double-click on the APK file: this will install the APK.
Yep! Well good luck
jwoegerbauer said:
Glad to here you solved it.
Only to have mentioned it, there is a workaround - as always because many ways leads to Rome:
Copy the APK of interest onto MicroSD-card, plug the card into phone, afterwards using any File Manager application that is installed on phone, navigate to the location on MicroSD where the APK file is located and finally double-click on the APK file: this will install the APK.
Click to expand...
Click to collapse
NOW he tells me!
That was where I began 2+ weeks back, downloading to SD card and trying to find a way inside the phone to do it. Never thought of File Manager! Duh~
Take care buddy, enjoy your weekend, wherever you are.
p
thebic said:
NOW he tells me!
That was where I began 2+ weeks back, downloading to SD card and trying to find a way inside the phone to do it. Never thought of File Manager! Duh~
Take care buddy, enjoy your weekend, wherever you are.
p
Click to expand...
Click to collapse
Aroma File Manager, how nostalgic~
Now to wait till a mod closes this post