This is the stock froyo ROM. The only changes that have been made to it is it's rooted, support for init.d, removed VM bloat, and busybox was added
Install via clockworkmod recovery
Downloads
Deodex
Odex
untested due to the fact that I dont have this device
credits:
barnito over at androidforums for the 100% stock nandroid this was based off of
dsixda for the awesome kitchen used to make this
DEODEXED ROM BREAKS WIFI, use b_randons in the theme section instead
Do I install it normally from CWM? I'm about to do just that.
Hope I don't mess things up like I usually do.
Edit: I'm getting an error while I try to install the Deodex version.
Installing update...
assert failed: wrtie_raw_image("/tmp/boot.img",
"boot")
E:Error in /sdcard/download/Triumph-Deodexed.zip
(Status 7)
Installation aborted.
Click to expand...
Click to collapse
Alright I thought I had the metainf folder right, guess not, ill try and figure it out sorry
Sent from my PG06100
Install via ClockWorkMod or RSDLite?
qipengart said:
Install via ClockWorkMod or RSDLite?
Click to expand...
Click to collapse
Updated OP to say clockwork, but they won't flash cuz I don't have the metainf folder right, if my internet decides it wants to start working then ill fix it
Edit: found out what was wrong, it doesn't use the write raw image commands to flash a boot image like every other phone, it just moves it to the folder, hopefully that was it
Sent from my PG06100
Any screenshots?
Just deodexed phone last night using a suggested kitchen. Any ideas how to get qcnvitems.jar in /framework to deodex I can't seem to find the dependencies.
Sent from my MOTWX435KT using XDA Premium App
No screenshots cuz 1, its just the stock rom odexed and deodexed which changes nothing look wise, and 2 I don't have the phone, but to the deodexing question, I did this in dsixdas kitchen and I didn't get any errors so try using that. Also to anyone who's flashed these, r they working now? Was having an updater script fail originally but I think I got it worked out
Sent from my PG06100
Awesome!!!!
First rom!!!!!!!!!!!!!!
I lose wi-fi with deodex version
punkmaxx said:
I lose wi-fi with deodex version
Click to expand...
Click to collapse
now this i do not understand..same kernel and same kernel modules..hmm..did u wipe before u flashed it?
...your testing this w/o a test phone...nice
Sent from my MOTWX435KT using XDA App
pwnyourace said:
now this i do not understand..same kernel and same kernel modules..hmm..did u wipe before u flashed it?
Click to expand...
Click to collapse
yes but ive been doing alot of experimenting lately i might have flashed another kernel and forgot. i'll flash again after work and try to remember not to flash anything afterwards. Your kernel (test11) i flashed has no wifi problems but it may have interfered also i might have mis-flashed and put in one of the test kernels that have no wifi so probably my fault.
punkmaxx said:
yes but ive been doing alot of experimenting lately i might have flashed another kernel and forgot. i'll flash again after work and try to remember not to flash anything afterwards. Your kernel (test11) i flashed has no wifi problems but it may have interfered also i might have mis-flashed and put in one of the test kernels that have no wifi so probably my fault.
Click to expand...
Click to collapse
That's gotta be it cuz wifi is done in the kernel and modules and both are stock I these
Sent from my PG06100
I had the same WiFi issue. In CWM, I wiped system, data, cache, and dalvik. Still had the WiFi problem. I returned to a stock rom and all is well (aside from having to root again... lol)
Hey you should look at the source for that doom kernel and remove the zram and remap the keys our
just use the over clocking from it on yours it works for sure.
Sent from my MOTWX435KT using Tapatalk
Rezanow said:
I had the same WiFi issue. In CWM, I wiped system, data, cache, and dalvik. Still had the WiFi problem. I returned to a stock rom and all is well (aside from having to root again... lol)
Click to expand...
Click to collapse
is this with the deodexed or the odexed or both?
pwnyourace said:
is this with the deodexed or the odexed or both?
Click to expand...
Click to collapse
Deodexed, sorry.
Rezanow said:
Deodexed, sorry.
Click to expand...
Click to collapse
I mean is it just the deodexed? Does it work with odex?
Sent from my PG06100
pwnyourace said:
I mean is it just the deodexed? Does it work with odex?
Sent from my PG06100
Click to expand...
Click to collapse
Oh. I'll be honest, I didn't try the other one. Was too late last night to continue screwing with things, so I gave up and went to bed. I'll get back to you when I try the other one.
Related
Please read before flashing
This is a 100% Stock T839UVKG2 Firmware for the SK4G
How to Install/Flash.
1. Boot into Clockwork Recovery
2. Install from /SDCARD
3. Choose StockT839UVKG2.zip
4. Enjoy ;D
Download Link : Here
just send a link to teddy's odin thread its his odin in a zip file...
It's not his odin in a .zip learn before posting on a thread , It's my CWM flashable version . Stop ****ing trying to hi-jack all of my thread's .
tylermaciaszek said:
just send a link to teddy's odin thread its his odin in a zip file...
Click to expand...
Click to collapse
tylermaciaszek said:
just send a link to teddy's odin thread its his odin in a zip file...
Click to expand...
Click to collapse
Revolutions right is his ROM. Not teddys.
Sent from Sidekick 4G rooted Ultimate SK4G/2.2.1 using Tapatalk
Thank the lord for someone from TR coming in this thread , as you see i did all the work & nobody else did it .
ishred11 said:
Revolutions right is his ROM. Not teddys.
Sent from Sidekick 4G rooted Ultimate SK4G/2.2.1 using Tapatalk
Click to expand...
Click to collapse
I have a correctly working deodexed KG2 built and uploading now, will post it when it's done to have you guys test it out.
http://www.multiupload.com/W6AVD5P54R
This has been tested by me, to flash correctlly, but that doesn't mean that this is guaranteed to work, so proceed with caution. Make a backup before flashing.
This is Deodexed and rooted STOCK KG2, with the ported KG2 bali.
This works with my EPM mod as well as my TransGreyFrozen theme, test it out (carefully) and let me know how it works.
This is a right correctly working KG2 not deodexed ;p .
sduvick said:
I have a correctly working deodexed KG2 built and uploading now, will post it when it's done to have you guys test it out.
Click to expand...
Click to collapse
sduvick said:
I have a correctly working deodexed KG2 built and uploading now, will post it when it's done to have you guys test it out.
http://www.multiupload.com/W6AVD5P54R
This has been tested by me, to flash correctlly, but that doesn't mean that this is guaranteed to work, so proceed with caution. Make a backup before flashing.
This is Deodexed and rooted STOCK KG2, with the ported KG2 bali.
This works with my EPM mod as well as my TransGreyFrozen theme, test it out (carefully) and let me know how it works.
Click to expand...
Click to collapse
so this is deodexed with bali included ima test now just asking cuz revolution says not deodexed
Mine isn't deodexed , his is & his is the proper way . It has a few bug's his deodexed . I flashed the deodexed KG2 & it still has the stock kernel .
Datlilboricua said:
so this is deodexed with bali included ima test now just asking cuz revolution says not deodexed
Click to expand...
Click to collapse
I just tested it it does have the stock kernel and my web app forcecloses idk why still testin
Deodexed one
It does have bali just dosent show in system settings and I had to swap the web app with the one from ginger clone
Sent From My Rooted Sidekick 4g XDA Premium App
I have to edit my kernel build name next update to bali, that's not a big deal, that's just asthetics. hmm it's weird that the web app fc'd, i'll swap it with the one from ginger clone and post a real thread on it, guess I didn't read the title, I thought yours was supposed to be deodexed.
How do u determine if u have kd1 or kg2???
Sent from my SGH-T839 using XDA App
Flash the ODIN version , cause this was unfinished Kg2
wilt100 said:
How do u determine if u have kd1 or kg2???
Sent from my SGH-T839 using XDA App
Click to expand...
Click to collapse
Still can't install..
Got abort with orange cwm.
Sent from my SGH-T839 using Tapatalk
ishred11 said:
Still can't install..
Got abort with orange cwm.
Sent from my SGH-T839 using Tapatalk
Click to expand...
Click to collapse
orange cwm?
you should have a red one..
tylermaciaszek said:
orange cwm?
you should have a red one..
Click to expand...
Click to collapse
i cant get it because kg2 bali wont flash correctly
Plus Version of the EH17 Kernel, rooted, bootanimations, and with my kernel, memory, and VM tweaks... also ext4 capable.
Also it has CWM Purple built-in so its ACS Updater Compatible, as well QuickBoot and ROM Manager..
creates a symlink from bootanimation.zip to sanim.zip, so no need to rename boot animations.
Updated 9/6/11***
Added a few new tweaks...
Fixed bootanimation symlink..
changed the script to not overwrite SU/Superuser.apk or Busybox in case you want to upgrade
Fixed the reboot recovery problem..
let me know what yall think..
thanks to qbking for testing
http://www.forums.acsyndicate.net/s...xt4-Tweaked-Superuser.apk-Su-Busybox-Built-In
Sweet! Just installed Hurricane v1.1 and now this, thanks!
Great work Chris! This works great!!
Great and Quick work as usual.....Thank you sir!
Excuse the n00bish question... Is there init.d support?
awesome!!! would you care if i baked this in an update to hurricane?
also, how can i make this ext4? run the command in the updater-script with the kernel?
btw thanks a bunch chris41g
hoffman1984 said:
Excuse the n00bish question... Is there init.d support?
Click to expand...
Click to collapse
ksmullins88 said:
also, how can i make this ext4? run the command in the updater-script with the kernel?
btw thanks a bunch chris41g
Click to expand...
Click to collapse
im wondering these questions too
yes init.d support.. its the same as eg22plus and eh06plus just updated with the new kernel...
you can convert to ext4 with rfs2etx4.zip or on a new install just format the partitions as ext4
and go ahead bake it into your ROMs
If its ok, id like to use this in the next version of starskyROM
Sent from my SPH-D700 using xda premium
i cant get busybox to work right... can one of you guys help me figure it out?
@starsky, i pm'd you.
chris41g said:
yes init.d support.. its the same as eg22plus and eh06plus just updated with the new kernel...
you can convert to ext4 with rfs2etx4.zip or on a new install just format the partitions as ext4
and go ahead bake it into your ROMs
Click to expand...
Click to collapse
rfs2etx4.zip bricked my phone... Backup even failed on me... Any chance i can use this in my ROM?
Edit... it's telling me i'm low on storage. ouch... Maybe it's my ROM, but i haven't changed that much.
Edit... Just reinstalled my ROM, and i lost root somehow? Will report back on this one...
ohh btw i couldnt get bootanimation.zip to work. i had to rename it to sanim.zip still
hoffman1984 said:
rfs2etx4.zip bricked my phone... Backup even failed on me... Any chance i can use this in my ROM?
Edit... it's telling me i'm low on storage. ouch... Maybe it's my ROM, but i haven't changed that much.
Edit... Just reinstalled my ROM, and i lost root somehow? Will report back on this one...
Click to expand...
Click to collapse
If it bricked your phone, you wouldn't have been able to flash anything else on out.
Sent from my SPH-D700 using xda premium
odub303 said:
If it bricked your phone, you wouldn't have been able to flash anything else on out.
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
Could of just been a "soft brick"
Btw, nice work as usual Chris
Have u been able to replace your bricked Epic yet?
Sent from my SPH-D700 using xda premium
odub303 said:
If it bricked your phone, you wouldn't have been able to flash anything else on out.
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
thanks for the clarification... I've apparently never had a bricked phone then.
Reboot lead to a stuck boot ani, and did so for more than 15 minutes... twice, so i booted back into CWM, and ended up installing my ROM... The second time it worked... Not sure what happened.
Has anyone been successful at converting to ext4???? I tried it with eh06 and soft bricked twice...before I Odin eh17 I wanna know if anyone has got it up and running....I really don't wanna lose my setup........again
Sent from my SPH-D700 using XDA App
Can someone pm me and give me instructions as to how I can put the stock boot and shutdown animations back in? I actually have grown to love them and I miss them already (I have only rebooted the one time after I flashed the kernel...).
Thanks for the quick and excellent work as always.
Sent from my SPH-D700 using XDA App
chris41g said:
yes init.d support.. its the same as eg22plus and eh06plus just updated with the new kernel...
you can convert to ext4 with rfs2etx4.zip or on a new install just format the partitions as ext4
and go ahead bake it into your ROMs
Click to expand...
Click to collapse
This is probably one of those "noobie' questions but if I understand this correctly, I can wipe data/cache/delvic cache 3 times - flash the rfs2xt4 zip - flash the eh17 kernel - then flash the hurricane rom - all in CWM - is that correct?
Question - assuming that is correct - can I restore data only from a previous nandroid backup which was made from the Hurricane rom before I flashed the rfs2xt4 zip to avoid doing new installs for everything? or does that void the conversion to EXT4? or I could just wait until it has been baked into the Rom - but then the same question remains? Can I run a Nandroid restore of data only after I have converted to ext4 ?
Qwallace70129 said:
Has anyone been successful at converting to ext4???? I tried it with eh06 and soft bricked twice...before I Odin eh17 I wanna know if anyone has got it up and running....I really don't wanna lose my setup........again
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Yes....worked perfectly.
ill check on the bootanimation thing.. and the stock animations are disabled in this kernel completely
Ok, As promised the rooted version...
Enjoy!
This rom includes entrpys daily driver, thank him for all his hars work!
Boot into CWM
Wipe data, cache, dalvik cache
choose zip
flash zip
reboot
enjoy
Download here:
UCLB3 Rooted
TO GET VIDEO BACK UNZIP ZIMAGE_UCLB3.ZIP AND FLASH WITH SGS KERNEL FLASHER. BE SURE TO DISABLE VOODOO LAGFIX FIRST!
DOWNLOAD STOCK KERNEL HERE:
UCLB3 STOCK KERNEL
Bedtime for me now....
Sent from my SAMSUNG-SGH-I997 using xda premium
Thank you, d, again. 'nuff said.
Thanks Dman, you're great.
Sent from my SAMSUNG-SGH-I997 using xda premium
Is Video working on this without stock kernel? Thanks
jblparisi said:
Is Video working on this without stock kernel? Thanks
Click to expand...
Click to collapse
no...need to stock kernel. read the leak thread http://forum.xda-developers.com/showthread.php?t=1507658&page=2
Installed. it's very fast, smooth scroll and responsive touch. A question for you, Dman, do you think make a zeus version of this?
Sent from my SAMSUNG-SGH-I997 using xda premium
can we use the stock kernel from UCLB1?
Use the one from lb3, why lb1?
Sent from my SAMSUNG-SGH-I997 using xda premium
ppalbicke said:
Use the one from lb3, why lb1?
Sent from my SAMSUNG-SGH-I997 using xda premium
Click to expand...
Click to collapse
didnt see it posted must have missed it
Thanks Dman for all your hard work!!
this rom removed cwm
No it didnt
Sent from my SAMSUNG-SGH-I997 using xda premium
this rom has logo and stuf att or is clean , afte flash i need a flahs modem or lb3 tellme mero about this flash
jmax6 said:
this rom has logo and stuf att or is clean , afte flash i need a flahs modem or lb3 tellme mero about this flash
Click to expand...
Click to collapse
What? See OP instructions above...or below - the LB3 modem will be included in the rom...
dman3285 said:
Boot into CWM
Wipe data, cache, dalvik cache
choose zip
flash zip
reboot
enjoy
Download here:
UCLB3 Rooted
Click to expand...
Click to collapse
Will this make my phone brickz! I hear rooting is bad and breaks your phone..!
Thanks D! flashing today!
Sent from my SAMSUNG-SGH-I997 using Tapatalk
dman3285 said:
No it didnt
Sent from my SAMSUNG-SGH-I997 using xda premium
Click to expand...
Click to collapse
so, you stopped the zeus development?
ok guys little help please, been away from infuse scene a while since i got my skyrocket, my wife inherited my infuse so reverted from zues back to stock for her, well no she wants to be rooted etc.... sooo trying to refresh a little, if she is on stock leak lb3 and wants to go to dmans version i think i have to install cwm kernel via odin, which cant seem to find, install rom via cwm, then flash stock kernel via sgs kernel flasher to get all video working. Is this correct, if so could someone point me to the odin flashable kernel? please and thanks
cablegooru said:
ok guys little help please, been away from infuse scene a while since i got my skyrocket, my wife inherited my infuse so reverted from zues back to stock for her, well no she wants to be rooted etc.... sooo trying to refresh a little, if she is on stock leak lb3 and wants to go to dmans version i think i have to install cwm kernel via odin, which cant seem to find, install rom via cwm, then flash stock kernel via sgs kernel flasher to get all video working. Is this correct, if so could someone point me to the odin flashable kernel? please and thanks
Click to expand...
Click to collapse
Http://forum.xda-developers.com/showthread.php?t=1212795
alfatech said:
so, you stopped the zeus development?
Click to expand...
Click to collapse
He was talking about it not losing CWM.. How did you get that he was stopping Zeus development out of this...?
Sent from my SAMSUNG-SGH-I997 using Tapatalk
Well ive flashed over and over again. i have a completely unlocked bootloader and recovery. synergy rom just doesnt to want to work completely on my phone. i thought maybe my download was bad so i downloaded again from my phone and that didnt work. either. once i select all my options from the installer from synergy it fails on ziggy kernel. is says values not updated and but still gives me kernel install ok. tried it with the stock kernel too and that installs just fine but camera still fails. thats pretty much the only problem im having and i cant seam to find an answer anywhere so thats why i posted. i know most people arent worried about the camera but i got a baby girl and i take a lot of pics lol please any help
I'm having similar problems. If you find a fix please let me know. Will do the same.
vitokes said:
Well ive flashed over and over again. i have a completely unlocked bootloader and recovery. synergy rom just doesnt to want to work completely on my phone. i thought maybe my download was bad so i downloaded again from my phone and that didnt work. either. once i select all my options from the installer from synergy it fails on ziggy kernel. is says values not updated and but still gives me kernel install ok. tried it with the stock kernel too and that installs just fine but camera still fails. thats pretty much the only problem im having and i cant seam to find an answer anywhere so thats why i posted. i know most people arent worried about the camera but i got a baby girl and i take a lot of pics lol please any help
Click to expand...
Click to collapse
Baseband version?
Sent from my SCH-I535 using Tapatalk 4 Beta
Addiso said:
Baseband version?
Sent from my SCH-I535 using Tapatalk 4 Beta
Click to expand...
Click to collapse
of what my stock rom or the synergy rom?
cause my stock rom is baseband I535VRBMF1
Need to flash a different kernel. I use KT747
Sent from my SCH-I535 using xda app-developers app
sjpritch25 said:
Need to flash a different kernel. I use KT747
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
ive tried searching for this kernel. do you by any chance have a link?
or any other kernels available
vitokes said:
ive tried searching for this kernel. do you by any chance have a link?
or any other kernels available
Click to expand...
Click to collapse
nevermind i found it i will post results
deputyvanhalen said:
I'm having similar problems. If you find a fix please let me know. Will do the same.
Click to expand...
Click to collapse
hey kt747 kernel worked. it fixed the camera and now its running perfectly good. try that way
can you link me to the kernel you downloaded? I've found one but it says it's for AT&T and I'm on big red (verizon)
vitokes said:
hey kt747 kernel worked. it fixed the camera and now its running perfectly good. try that way
Click to expand...
Click to collapse
deputyvanhalen said:
can you link me to the kernel you downloaded? I've found one but it says it's for AT&T and I'm on big red (verizon)
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=41733434
that should be it if not just copy paste it. its a little down the line and it has all 4 carriers.
big red is in green and make sure you get the touchwiz JB 4.1.1 and 4.1.2 download
install:
1) flash your rom and get it started
2) Back to recovery and flash KT747
3) After it install stay in recovery and wipe dalvik and cache
4) Fix Permissions
all of this at the same time you flash kt747
hope it works
Flash any kernel that has been updated to md3 source and up, just so you aren't just left with Ktoonsez as your only option, Lean kernel also works.
Sent from my SCH-I535 using Tapatalk 4 Beta
Thanks, i'm running cm 7/16 nightly. Flashed the ktoonsez aosp kernel and still camera can't connect. Idk why this won't work on my phone.
Addiso said:
Flash any kernel that has been updated to md3 source and up, just so you aren't just left with Ktoonsez as your only option, Lean kernel also works.
Sent from my SCH-I535 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Just trying to be helpful here, here is a faster way to get from stock one-click to JB goodness.....
After you flash to stock with antonx kernel reboot into recovery and flash bhundvens blastoff kernel, reboot recovery, now you should be in blue 5.0.2.8....flash the newest cm9, it will reboot automatically into recovery for you to flash a second time, but don't, instead flash a JB Rom, (I flashed chaos from dao) once it rebooted into recovery...jellybean recovery, I flashed the Rom plus gapps. Rom booted just fine.
So.....save a little time from completely flashing the whole rom, waiting for it to boot and rebooting into recovery just to do it again till you get where you want.....cheers
hopefully it saves you some time
************************just like everyone else says "I AM NOT RESPONSIBLE IF YOU BRICK YOUR PHONE"*****************
just one-click back and start over hee hee!!!!
If you're saying flashing a kernel with CWM 5.x and then flashing a JB ROM is faster, we all know that already.
You are not flashing the kernel first technically. What you are doing is converting the file system.
However I thought all the JB roms had the mtd conversion script included. If they dont I would ask the person that ported them to update it with that script. There should never be a reason to flash to ics then jb.
AnAznBoy9724 said:
If you're saying flashing a kernel with CWM 5.x and then flashing a JB ROM is faster, we all know that already.
Click to expand...
Click to collapse
Not everyone knows that... If they did there wouldn't be people asking how to flash or how to get back to stock or to root....
Sent from my SGH-T959V using xda app-developers app
ArmyofTracy said:
Not everyone knows that... If they did there wouldn't be people asking how to flash or how to get back to stock or to root....
Sent from my SGH-T959V using xda app-developers app
Click to expand...
Click to collapse
Getting back to stock and rooting are totally different subjects and shouldn't be asked in ROM threads anyways. Flashing the ROM are always in the OP.
I understand..... Thanks. You sure learned a lot since these posts....
What does aries mean? June 18
Where is the fast charge option June 2......
Sent from my SGH-T959V using xda app-developers app
limeaide said:
You are not flashing the kernel first technically. What you are doing is converting the file system.
However I thought all the JB roms had the mtd conversion script included. If they dont I would ask the person that ported them to update it with that script. There should never be a reason to flash to ics then jb.
Click to expand...
Click to collapse
If you go back to our early JB ROMs
It was said to flash cm 9 or be on
a ICS ROM first if coming from GB.
Its said to be different now...
I still don't trust it..out of habit and
because it has always worked..
If I one-click back to stock I always
flash cm9 first then flash JB.
Sent from my SGH-T959V using xda premium
ArmyofTracy said:
I understand..... Thanks. You sure learned a lot since these posts....
What does aries mean? June 18
Where is the fast charge option June 2......
Sent from my SGH-T959V using xda app-developers app
Click to expand...
Click to collapse
So now you're saying I can't make threads with questions I have? Okay... Can we get a mod to clean this thread up please?
AnAznBoy9724 said:
So now you're saying I can't make threads with questions I have? Okay... Can we get a mod to clean this thread up please?
Click to expand...
Click to collapse
Why do we need a mod
to clean up this thread...
Because you made a Remark
and he called you out.
He said thank you...
Relax its all good...
Sent from my SGH-T959V using xda premium
It's a useless arguement no one needs to see.
:banghead:
ArmyofTracy said:
:banghead:
Click to expand...
Click to collapse
\m/