Database Info

Stuck On Boot Screen (HTC quietly brilliant)

I just installed the Android Revolution HD 6.5.2. On the first boot, it's been stuck on the "HTC quietly brilliant" screen for like 15minutes. Did I do something wrong during the install? How do I fix this? Prior to the install, I used superwipe, flashed my phone then installed the Android Revolution HD 6.5.2.

Did you install the right firmware before flashing rom?

kualmente said:
Did you install the right firmware before flashing rom?
Click to expand...
Click to collapse
I may or may not have. Could you care to elaborate about the correct firmware? Thanks, it would help a lot. Kinda crapping my pants right now :/

http://forum.xda-developers.com/showthread.php?t=1098849
"It's necessary to flash new firmware package before flashing this ROM ---
--- Firmware package contains newest radio for 6.5.x ROMs ---"
Need to know what is your cid in order to install the new firmware but it should be this one
Download firmaware and put on sd card. Then reboot into bootloader while pressing vol down + power button. It will install the right firmware. Be patient untill the entire process is finished and prompted to reboot.
The screen may goes black a couple of times before the process is completed, no panic and just wait it to finish.
Later, remember to delete the PG58IMG from sd card.
Hope it helps

That's the exact guide I used to root my htc sensation. The problem is, my phone is stuck on the boot screen "HTC". Is there a way to access the SD card to reverse the installation of the rom? Thanks.

andrevvc said:
That's the exact guide I used to root my htc sensation. The problem is, my phone is stuck on the boot screen "HTC". Is there a way to access the SD card to reverse the installation of the rom? Thanks.
Click to expand...
Click to collapse
Need a sd card adapter or another phone

Is there anyway to start my phone? Is it bricked?

if you are able to reboot into bootloader you are not bricked.
Pull out the battery and reinsert, power on while pressing Volume down + power button and tell me what happens and what it says.

It boots into 4EXT Recovery. The only zip i have on my phone is superflash and Android_Revolution_HD-Sensation_6.5.2. I tried formatting all the data, and doing a clean install of Android_Revolution_HD-Sensation_6.5.2 but it keeps freezing on the screen that says "HTC quietly brilliant" when i reboot? Is there anyway I can get this working with what I have? Thanks man really appreciate the help.

I told you. Download the right firmware and put it in sd card, then reboot into bootloader and it will install the new firmware. Read my previous posts
In 4Ext recovery there should be an option like "togle usb" or something like this. If so, you are able to see the content of sd card and you can put the PG58IMG on it from pc

Yeah i hear you, but is there a way to access my root folder? It's not showing up as a removable drive. I dl'd the PG58IMG.zip, but I can't drag it into the folder, because when I plug my usb into my computer, it's not reading my phone as a removable drive = /

probably you dont have the htc driver installed. Download from Here

I downloaded the htc driver prior to rooting my phone. What are my options now?

So, your pc dont see your phone right?
In this case you need a sd card adapter and work from there.
Clearly you didn't install the firmware before flashing the rom. If you look at my previous posts I gave all the instructions.
Find a way to read your sd card from pc (adapter?) then put the firmware (PG58IMG) in the root of sd card and reboot into bootloader to install the firmware.
Later, remember to delete PG58IMG when you are done.
Then, all should work fine.
Good luck!
PS. hitting thanks button wouldn't hurt me by the way!

kualmente said:
So, your pc dont see your phone right?
In this case you need a sd card adapter and work from there.
Clearly you didn't install the firmware before flashing the rom. If you look at my previous posts I gave all the instructions.
Find a way to read your sd card from pc (adapter?) then put the firmware (PG58IMG) in the root of sd card and reboot into bootloader.
Then, all should work fine.
Good luck!
PS. hitting thanks button wouldn't hurt me by the way!
Click to expand...
Click to collapse
Yeah im new to the forum, ill definitely hit the thank button. I looked in the 4EXT Recovery program and I found there's an option called "USB mass storage device". Now I can drop the file into the SD card. Before I install the PG58IMG.zip, should I run superwipe first since I installed the Android_Revolution_HD-Sensation_6.5.2? Thanks

andrevvc said:
Yeah im new to the forum, ill definitely hit the thank button. I looked in the 4EXT Recovery program and I found there's an option called "USB mass storage device". Now I can drop the file into the SD card. Before I install the PG58IMG.zip, should I run superwipe first since I installed the Android_Revolution_HD-Sensation_6.5.2? Thanks
Click to expand...
Click to collapse
Yes better superwipe again even if you did before. Let's say start from the beginning just to be on the safe side
1) install firmware
2) superwipe
3) install rom

Hmm weird problem. I tried installing the PG58IMG.zip and it says ..
Finding update package...
Opening update package...
Installing update...
Installation aborted.
Any clues?

andrevvc said:
Hmm weird problem. I tried installing the PG58IMG.zip and it says ..
Finding update package...
Opening update package...
Installing update...
Installation aborted.
Any clues?
Click to expand...
Click to collapse
You dont have to install PG58IMG from recovery.
Just off the phone (pull the battery out and reinsert). Power up by pressing volume down + power button (keep it pressed until hboot screen appears). The PG58IMG is automatically recognized by device and you will be prompted to update. Say yes by pressing volume up. Then be patient and wait for the entire process is completed as I told few post ago.

Sorry I forgot I had to install it in bootloader xD god, I hate roms! I wish I got into phone modifying long time ago. Im such a noob it's so sad

When you are done, remember that first boot takes a while so be patient and just wait

[Q] Wifi seems dead after 4.2.1 update not rooted, not unlocked

Hope someone can help, I installed the 4.2.1 update yesterday and after it finished installing and rebooting my wifi no longer works...It no longer sees any wifi networks in range and I live in an apartment building where it can normally see 8+ networks in range. I have turned the wifi on/off and rebooted several times, as well as cold booted (and made sure not in airplane mode)...anyone have any suggestions?
Tablet is not rooted nor unlocked and never has been. Have applied every OTA update prior to 4.2.1 with no problems. Any suggestions would be much appreciated!

Is Wifi set to Wifi Direct?

GitAlongLilDoggies said:
Is Wifi set to Wifi Direct?
Click to expand...
Click to collapse
Nope, just double checked. To add on I've now noticed that it has problems turning off, in that, it doesn't actually turn off when you hit the power key and select that from the menu - instead it always reboots. If I hold down volume while it is rebooting I can get it to actually turn off instead of reboot. Otherwise all the apps and the GPS appeared to work fine.
I did a factory reset last night and that did not help, but that did ensure that I lost all my data!
I am now wondering if the battery died while the 4.2.1 update was installing. Is there any way I can manually reinstall the official 4.2.1 upgrade by connecting the table to my PC? Does anyone think that would help?

purerage34 said:
Nope, just double checked. To add on I've now noticed that it has problems turning off, in that, it doesn't actually turn off when you hit the power key and select that from the menu - instead it always reboots. If I hold down volume while it is rebooting I can get it to actually turn off instead of reboot. Otherwise all the apps and the GPS appeared to work fine.
I did a factory reset last night and that did not help, but that did ensure that I lost all my data!
I am now wondering if the battery died while the 4.2.1 update was installing. Is there any way I can manually reinstall the official 4.2.1 upgrade by connecting the table to my PC? Does anyone think that would help?
Click to expand...
Click to collapse
You're not clear on what you're asking, is your tablet dead? not boot up? can you still boot into recovery?? I understand that you still locked and unrooted.

buhohitr said:
You're not clear on what you're asking, is your tablet dead? not boot up? can you still boot into recovery?? I understand that you still locked and unrooted.
Click to expand...
Click to collapse
The tablet turns on and works just fine except for the wifi and for some reason, when I try to turn it off, it always reboots instead of staying off (it turns off, then immediately turns itself back on). What is "booting into recovery"? Is that just holding the volume down button when turning on? If so, then yes I can do that and whether I pick the Android logo or the first choice, it doesn't fix the wifi...

purerage34 said:
The tablet turns on and works just fine except for the wifi and for some reason, when I try to turn it off, it always reboots instead of staying off (it turns off, then immediately turns itself back on). What is "booting into recovery"? Is that just holding the volume down button when turning on? If so, then yes I can do that and whether I pick the Android logo or the first choice, it doesn't fix the wifi...
Click to expand...
Click to collapse
I suggest to download the full Asus firmware .25 and reflash it, once done it will auto update back to JB 4.2.1. Just download the the .25, unzip, then rename the unzipped file to EP201_768_SDUPDATE then copy this file to the root of your microsdcard, then boot into recovery (volume down+power buttons), wait a bit then the update should start.

Thanks I'll give that a shot!

So I downloaded the .25 update, unzipped (which is another zip file?) renamed to what you posted, copied to the root of the sdcard, turned off, turned back on while holding down volume, selected RCV and it starts to install the update then after less than 5 seconds it gives me the dead android guy and just says "Error"...
Am I supposed to unzip the second zip file also? Didn't think so because that has a folder and a blob file inside of it.

purerage34 said:
So I downloaded the .25 update, unzipped (which is another zip file?) renamed to what you posted, copied to the root of the sdcard, turned off, turned back on while holding down volume, selected RCV and it starts to install the update then after less than 5 seconds it gives me the dead android guy and just says "Error"...
Am I supposed to unzip the second zip file also? Didn't think so because that has a folder and a blob file inside of it.
Click to expand...
Click to collapse
Can you boot into recovery (vol down and power button), select wipe data icon with volume down then hit volume up to execute data wipe, once finished redo the manual flash.

buhohitr said:
Can you boot into recovery (vol down and power button), select wipe data icon with volume down then hit volume up to execute data wipe, once finished redo the manual flash.
Click to expand...
Click to collapse
Ok I wiped the data, copied the .25 file back onto the tablet and selected RCK again, but unfortunately get the same results and "Error" message. I really appreciate the suggestions, anything else you can think of?

purerage34 said:
Ok I wiped the data, copied the .25 file back onto the tablet and selected RCK again, but unfortunately get the same results and "Error" message. I really appreciate the suggestions, anything else you can think of?
Click to expand...
Click to collapse
Right now there are a few possibilities:
1. Download the ICS .30 version here http://forum.xda-developers.com/showthread.php?t=1946456, the reflash again.
2. Possible sdcard is not good - need to reformat your card
Please try both.

buhohitr said:
Right now there are a few possibilities:
1. Download the ICS .30 version here http://forum.xda-developers.com/showthread.php?t=1946456, the reflash again.
2. Possible sdcard is not good - need to reformat your card
Please try both.
Click to expand...
Click to collapse
Thanks will give this a try, if it comes to it, how would I reformat my sdcard?

purerage34 said:
Thanks will give this a try, if it comes to it, how would I reformat my sdcard?
Click to expand...
Click to collapse
I'm talking about micro sdcard.

Thank you so much! That worked!

purerage34 said:
Thank you so much! That worked!
Click to expand...
Click to collapse
Just an fyi there is a dlpkgfile that can do one upgrade from ICS .30 to .25 in one shot and there is a new tool that you can do root while in JB version.

buhohitr said:
Just an fyi there is a dlpkgfile that can do one upgrade from ICS .30 to .25 in one shot and there is a new tool that you can do root while in JB version.
Click to expand...
Click to collapse
Cool - actually might be a great time for me to root since I just re-installed the 4.2.1 update and guess what - it broke the wifi again (can't see/connect to any networks). So I get to start all over again with rolling back the upgrade. Wonder why I'm the only one who seems to have this problem...oh well.

purerage34 said:
Cool - actually might be a great time for me to root since I just re-installed the 4.2.1 update and guess what - it broke the wifi again (can't see/connect to any networks). So I get to start all over again with rolling back the upgrade. Wonder why I'm the only one who seems to have this problem...oh well.
Click to expand...
Click to collapse
What rom SKU (US or WW) you are using? take a look at the build.prop, what value is this line?
ro.wifi.country=

buhohitr said:
What rom SKU (US or WW) you are using? take a look at the build.prop, what value is this line?
ro.wifi.country=
Click to expand...
Click to collapse
SKU is US and WiFi version is V7.2.0.65 and the the Build Number is JRO03C.US_epad-10.4.4.25-20121228 is that what you are looking for?

NVM dont read this, silly me didnt see second page (facepalm)
Tylor

purerage34 said:
SKU is US and WiFi version is V7.2.0.65 and the the Build Number is JRO03C.US_epad-10.4.4.25-20121228 is that what you are looking for?
Click to expand...
Click to collapse
Looks like the 4.2 OTA isn't installing completely. I'm running 4.2 and the versions I have are,
SKU -> US
Wifi -> v7.2.1.44
Build # -> JOP40D.US_epad-10.6.1.14.4-20130329

[Q] Failure to update to 4.4.3

I am trying to install the OTA update. I have a rooted S-OFF vzw m8 and I put TWRP on the recovery partition.
I have gathered that I need to put the stock recovery back on, so I got the img from http://forum.xda-developers.com/showthread.php?t=2723159. When I boot to recovery now i get the red triangle with the exclamation point and when I do the update it fails.
Anyone have any ideas to try, just let me know what information you need.
Thank you for the help in advance.

coldwaterq said:
I am trying to install the OTA update. I have a rooted S-OFF vzw m8 and I put TWRP on the recovery partition.
I have gathered that I need to put the stock recovery back on, so I got the img from http://forum.xda-developers.com/showthread.php?t=2723159. When I boot to recovery now i get the red triangle with the exclamation point and when I do the update it fails.
Anyone have any ideas to try, just let me know what information you need.
Thank you for the help in advance.
Click to expand...
Click to collapse
When you get the red triangle press volume up and power. Then choose update from either phone storage or SD storage (wherever your update zip file is)

dottat said:
When you get the red triangle press volume up and power. Then choose update from either phone storage or SD storage (wherever your update zip file is)
Click to expand...
Click to collapse
That still didn't work, pressing the volume up and power button at the same time doesn't do anything on that screen.
What I did was download the OTA update, press install. It shuts the phone down and then when it comes back up I see the green circle and it seems to be updating and about half way through the update it stops and becomes the red triangle screen.
Any other ideas. Also I still have S-OFF is that a problem?
Thanks

coldwaterq said:
That still didn't work, pressing the volume up and power button at the same time doesn't do anything on that screen.
What I did was download the OTA update, press install. It shuts the phone down and then when it comes back up I see the green circle and it seems to be updating and about half way through the update it stops and becomes the red triangle screen.
Any other ideas. Also I still have S-OFF is that a problem?
Thanks
Click to expand...
Click to collapse
Sent you a pm.

I'm having the same issue
dottat said:
Sent you a pm.
Click to expand...
Click to collapse
I am having a similar issue. I have reinstalled the stock recovery, and after the update downloads, I click install. However my phone never shuts off, I just receive an error saying "They're was an error updating your HTC HTC6525LVM. No changes were made." What can I do here?

bleedgr33n said:
I am having a similar issue. I have reinstalled the stock recovery, and after the update downloads, I click install. However my phone never shuts off, I just receive an error saying "They're was an error updating your HTC HTC6525LVM. No changes were made." What can I do here?
Click to expand...
Click to collapse
You can always run my s on ruu exe. Even if you are s off. It will update system and firmware and will not wipe data.

Official Marshmallow 6.0 OTA for canadian xt1563 (telus, koodo, public mobile...)

Marshmallow OTA for canadian xt1563 : https://mega.nz/#!1pxWiSIS!u279kerhsu1HspzFZ4-wrzYfWgtSUqb3o8K8ffLw4lM
For the procedure, look down. Someone posted it on 1st page.
If you altered system ( ex:root) you'll need to go back to stock:
http://forum.xda-developers.com/showpost.php?p=62708260&postcount=5
Root (optional)
TWRP recovery (after applying the OTA) : http://forum.xda-developers.com/moto-x-play/orig-development/recovery-twrp-2-8-7-0-t3194656
The correct SuperSU: http://forum.xda-developers.com/showpost.php?p=64161125

The X Play is actually XT1563. This firmware is for the Moto G.
Update: the above statement is wrong. I can confirm this update is running perfectly on my Koodo X Play!

bngrybt said:
The X Play is actually XT1563. This firmware is for the Moto G.
Click to expand...
Click to collapse
Yeah, but the file listed on mega has lux_retca in its name. Moto X Play is codenamed as Lux, so maybe it is in fact the right file for XT1563? Maybe, it was just an error from poster MerlinMerlinMerlin?

Hmm... I have a Koodo X Play and just checked for the OTA and it wasn't available for me yet, but that has me wondering now. I don't wanna risk it until I'm sure though. Hopefully this means the OTA is out soon though.

Oops! I messed up the title.
Corrected the incorrect xt1053 by the correct xt1563

Just finished installing it through ADB sideload (I'm a Canadian Koodo user), I reinstalled the stock firmware before so that I could start on a fresh image. I had trouble getting into stock recovery at first. I was seeing a no command message when trying to enter it but, then I found the solution:
To get passed that point, you have to use the hold power + vol up button solution but, it's tricky, I had to try 3-4 times before getting it right. This part is kind of messed up, if you hold power button for too long, the phone interpret it as a reboot command. What worked best for me was holding vol up button alone for 5-6 seconds and then, I'd tap and release power button while still holding volume up button.
Click to expand...
Click to collapse
It worked perfectly...

How do you install it? Simply install it in recovery or do we need to install it by adb?

baskwo said:
How do you install it? Simply install it in recovery or do we need to install it by adb?
Click to expand...
Click to collapse
First, you need to have stock recovery, if you installed TWRP custom recovery, you will need to reinstall stock recovery. Entering stock recovery can be tricky, at first you may get an Android robot laying down with a "No command" message.
To get passed that point, you have to use the hold power + volume up button solution but, it's tricky, I had to try 3-4 times before getting it right. This part is kind of messed up, if you hold power button for too long, the phone interpret it as a reboot command. What worked best for me was holding vol up button alone for 5-6 seconds and then, I'd tap and release power button while still holding volume up button.
Edit: a user reported that this method work better (your mileage may vary)
Press and hold the Power Button for 2-5 seconds, while holding it, press and release the Volume Up button. You should now be seeing all the Recovery options.
Click to expand...
Click to collapse
Once you are booted in stock recovery mode, you can simply follow those steps:
Setup ADB and Fastboot on your PC.
Download the OTA update .zip file on your PC and rename it to ota.zip.
Enable USB debugging:
Go to your phone’s settings » About phone » and tap “Build number” Seven times. This will enable Developer options on your phone.
Now go to Settings » Developer options » and tick the USB debugging check box.
Connect your phone to PC.
Now open the folder where you downloaded the OTA update .zip file and then open a command window inside the folder. To do that, do a “Shift + Right click” on any empty white space inside the folder and select “Open command window here” from the context menu.
Now issue the following window to command window to reboot your device into recovery mode:
adb reboot recovery
└ Check your phone’s screen, if it asks for “Allow USB debugging”, accept it by selecting OK/Yes.
Once in recovery mode, use Volume buttons to navigate up and down between options and Power button to select an option.
Select the “Apply update from ADB” option.
Now issue the following command to finally begin installing the OTA:
adb sideload ota.zip
└ This will begin the OTA installation.
Once the OTA zip is installed, select reboot from the main menu of recovery.
Click to expand...
Click to collapse
Please take note that once Marshmallow is installed, nothing is stopping you from reinstalling TWRP and then, it will work as if nothing ever happened. If you need SuperSU, make sure to use SuperSU 2.62, earlier version may cause problem with Marshmallow. Also, if TWRP , ask if you want to install Root, click "Do not install" as it would install an older version of SuperSU. That's why you need to flash SuperSU 2.62 zipfile.

And if I want to keep TWRP?

Any chance someone could post a TWRP backup after installing the OTA?

baskwo said:
And if I want to keep TWRP?
Click to expand...
Click to collapse
You'll just have to reinstall TWRP after. No big deal, you can easily reinstall it afterward. That's what I did and TWRP is working perfectly as if nothing ever happened.

Nico3d3 said:
You'll just have to reinstall TWRP after. No big deal, you can easily reinstall it afterward.
Click to expand...
Click to collapse
Alright, thank you boy! <3 Where can I find the stock recovery?

baskwo said:
Alright, thank you boy! <3 Where can I find the stock recovery?
Click to expand...
Click to collapse
Just grab it from the original firmware zip file... : http://forum.xda-developers.com/moto-x-play/general/official-stock-firmwares-added-xt1562-t3195364

Nico3d3 said:
Just grab it from the original firmware zip file... : http://forum.xda-developers.com/moto-x-play/general/official-stock-firmwares-added-xt1562-t3195364
Click to expand...
Click to collapse
Does the XT1563_LUX_RETLA_DS_5.1.1_LPD23.118-32_cid12_subsidy-DEFAULT_CFC_v2.xml.zip file is ok if I'm from Koodo? Sorry I'm new to the Moto X Play I worked on a S3 before..

baskwo said:
Does the XT1563_LUX_RETLA_DS_5.1.1_LPD23.118-32_cid12_subsidy-DEFAULT_CFC_v2.xml.zip file is ok if I'm from Koodo? Sorry I'm new to the Moto X Play I worked on a S3 before..
Click to expand...
Click to collapse
Yes, it would work but, knowing how slow download from filefactory is, it would be probably take a looonnnggg time to download. That's why I uploaded the correct recovery.img file on my Google Drive, for the benefit of everyone: https://drive.google.com/file/d/0B-OWWP0oC4yLRDhsSDV0Mng3cVk/view?usp=sharing

Nico3d3 said:
Yes, it would work but, knowing how slow download from filefactory it would be probably take a looonnnggg time to download. That's why I uploaded the correct recovery.img file on my Google Drive, for the benefit of everyone: https://drive.google.com/file/d/0B-OWWP0oC4yLRDhsSDV0Mng3cVk/view?usp=sharing
Click to expand...
Click to collapse
Do you have a link the 5.1.1 fw?
I'd like to do a total fresh install then kick off the ota.

Anyone tested this on the xt1562?
Sent from my XT1562 using XDA Free mobile app

I misread last post, sorry about it, that's why I'm editing my post

Nico3d3 said:
Pleaaassseee, at least take the time to read a bit, no more than one page ago, you will have all informations regarding installation and how it worked.
Click to expand...
Click to collapse
There is nothing on that page about the xt1562, Just asking if anyone tested it on that device
Sent from my XT1562 using XDA Free mobile app

Nico3d3 said:
Pleaaassseee, at least take the time to read a bit, no more than one page ago, all informations regarding installation and how it worked are there.
Click to expand...
Click to collapse
Lol, you should read first before telling someone else
Sent from my Nexus 5 using Tapatalk

Xt1575 7.0 ota

Follow the rabbit:
https://forum.xda-developers.com/showpost.php?p=73958813&postcount=17

Sorry if this is very basic but how do I install it on a non-rooted stock phone? Does the file need to be in a specific directory?

nocaps said:
Sorry if this is very basic but how do I install it on a non-rooted stock phone? Does the file need to be in a specific directory?
Click to expand...
Click to collapse
Download it. Reboot into recovery. Install update from .zip file. Find your file and install.

nocaps said:
Sorry if this is very basic but how do I install it on a non-rooted stock phone? Does the file need to be in a specific directory?
Click to expand...
Click to collapse
Or use "adb sideload"...
Start recovery and press power+vol up, select update via ADB, then on computer enter "adb sideload update.zip" but replace update.zip with the actual filename.

Neither of the above methods work. I do not have any option to update from zip file in any of the menus available after starting with Pwr+Vol Down, and if I enter recovery mode itself I see the Android symbol and 'No Command' but the phone will not respond to Power+Vol Up, rather if these are held the phone will simply power down. Also when in recovery mode the phone will not respond to adb ( 'adb devices' list is null.) Adb does function normally on the same computer when the OS is running so no problem with the PC or drivers.
As noted above the phone is stock, meaning bootloader is still locked. Do I have to unlock the bootloader in order to apply the update? I would rather not do that.
TIA

nocaps said:
Neither of the above methods work. I do not have any option to update from zip file in any of the menus available after starting with Pwr+Vol Down, and if I enter recovery mode itself I see the Android symbol and 'No Command' but the phone will not respond to Power+Vol Up, rather if these are held the phone will simply power down. Also when in recovery mode the phone will not respond to adb ( 'adb devices' list is null.) Adb does function normally on the same computer when the OS is running so no problem with the PC or drivers.
As noted above the phone is stock, meaning bootloader is still locked. Do I have to unlock the bootloader in order to apply the update? I would rather not do that.
TIA
Click to expand...
Click to collapse
Hold power, then quickly tap Vol Up to access the recovery menu, whole thing takes less than a second... it works. You can't press them both at the same time.

How do I do this if I have 18-16 already?

acejavelin said:
Hold power, then quickly tap Vol Up to access the recovery menu, whole thing takes less than a second... it works. You can't press them both at the same time.
Click to expand...
Click to collapse
Yep, just did this earlier this morning. Hold power, tap vol up, release power.
Sadly I switched to an iPhone 6s that was given to me, I was patiently waiting for the MXPE update for the longest.
In fact, I was successfully running 7.0 Latin America version on T-Mobile back at the end of June, but when I switched to the Sprint 1 year free deal the ROM wasn't compatible.
I still plan to keep the MXPE but it is such a hassle to swap phones with Sprint. I miss that the most but could not pass up more reliable service for 1/10 the price (for a year).

acejavelin said:
Hold power, then quickly tap Vol Up to access the recovery menu, whole thing takes less than a second... it works. You can't press them both at the same time.
Click to expand...
Click to collapse
Yes, that got it, thanks.

Just a quick question as well. I've tried multiple times to update by applying the zip. Go to apply from SD card and nothing shows but ./..
I use volume up and down to see if I can go to the file and nothing happens.
I didn't rename the file and I have tried it with file in /sdcard and downloads.
Any help?
Carrier is Sprint and have December security patch if that matters.

cacs said:
Just a quick question as well. I've tried multiple times to update by applying the zip. Go to apply from SD card and nothing shows but ./..
I use volume up and down to see if I can go to the file and nothing happens.
I didn't rename the file and I have tried it with file in /sdcard and downloads.
Any help?
Carrier is Sprint and have December security patch if that matters.
Click to expand...
Click to collapse
you need to make sure your sd card is not set as internal you have to change it to portable check my guide https://forum.xda-developers.com/mo...ruction-how-flash-7-0-ota-pure-noobs-t3680835

Got it. Will try with a fresh SD card.
---------- Post added at 03:45 PM ---------- Previous post was at 03:29 PM ----------
Format the SD card. Set as potable. Google drive won't download due to no SD card detected.
Any ideas?
Sorry I sound like such a newb. Haven't had to flash a phone in forever

cacs said:
Got it. Will try with a fresh SD card.
---------- Post added at 03:45 PM ---------- Previous post was at 03:29 PM ----------
Format the SD card. Set as potable. Google drive won't download due to no SD card detected.
Any ideas?
Sorry I sound like such a newb. Haven't had to flash a phone in forever
Click to expand...
Click to collapse
download on your internal and copy paste it to the external drive?

cacs said:
Just a quick question as well. I've tried multiple times to update by applying the zip. Go to apply from SD card and nothing shows but ./..
I use volume up and down to see if I can go to the file and nothing happens.
I didn't rename the file and I have tried it with file in /sdcard and downloads.
Any help?.
Click to expand...
Click to collapse
Yes, I had the same problem. Your download directory is on your SD card and apparently the update file must be in internal memory (or at least your SD card cannot be formatted as a memory extension as mine was, and I didn't want to mess with swapping cards for the update because I has a lot of apps on the card.) I tried to find a directory in internal memory to place the file but didn't have write permission on a non-rooted phone. Solution was to use the adb sideload method described in post #4 and that worked well.
.

I received the notification on unlocked no carrier (backup for my note 5) I said I'm in said needed 910.7mb for install
OK download now said I didn't have enough space (had 3gb free) I freed up another 2gb and went to system update. Software up to date message what the ffffffffffffk lenovo?

hello everyone i have a question,i just went back to stock and want to update to nougat,but i can not flash the zip file (error)with TWRP.should i need to have locked bottloader?

osk4rin said:
hello everyone i have a question,i just went back to stock and want to update to nougat,but i can not flash the zip file (error)with TWRP.should i need to have locked bottloader?
Click to expand...
Click to collapse
No, you can't have TWRP... If you have TWRP you are not stock.

acejavelin said:
No, you can't have TWRP... If you have TWRP you are not stock.
Click to expand...
Click to collapse
First I flashed it with a regular Motorola recovery mode and didn't work . Then I tried with twrp, I left the bootloader unlock when I did the fastboot process. I have the stock marshmallow 6.0
I don't know what is the issue

osk4rin said:
First I flashed it with a regular Motorola recovery mode and didn't work . Then I tried with twrp, I left the bootloader unlock when I did the fastboot process. I have the stock marshmallow 6.0
I don't know what is the issue
Click to expand...
Click to collapse
If it was truly stock and on 18-16 firmware, it would have applied with stock recovery, been verified to work dozens, if not hundreds, of times... If it did not, then you need to look at the error messages from stock recovery as to what the problem is (hint, press and hold power and tap vol up then release to see the recovery logs).
TWRP is not an option here...

acejavelin said:
If it was truly stock and on 18-16 firmware, it would have applied with stock recovery, been verified to work dozens, if not hundreds, of times... If it did not, then you need to look at the error messages from stock recovery as to what the problem is (hint, press and hold power and tap vol up then release to see the recovery logs).
TWRP is not an option here...
Click to expand...
Click to collapse
Hello there, I am not on 18-16. I am on (24,49-18-8)trying to flash the file -24,49-18 ota to 24,18-16-
I don't using twrp anymore, just the stock mode.i don't know what is the issue.
Thanks