Database Info

OTA EE4 Root Access Help...Please!

I am going to activate a new device today. Planning on letting OTA EE4 do its thing. Afterwards, what process should I follow to achive root?

Just do a little reading first before asking.
It's in one of the threads. I'll post which one if I come across it.
The step by step is there too.

Done PLENTY of reading before tackling this. Just lots of threads with lots of confusing steps. Just trying to consolidate this process into somewhat simple steps for the beginners. I will attempt to write out the procedure I follow tonight and post it for the beginners. Any help to get this started would be appreciated.

Yes. I have been reading too and did not see clearly how to root after OTA update
Sent from my SCH-I510 using Tapatalk

Can't Find "How to Root from Latest EE4 Update"
I have been reading and searching for the exact same thing - if it is anywhere to be found, it must be buried pretty deep.

There are two ways to root your device. Depending on what you want the end result to be, one way may be quicker than the other.
1. If you want Voodoo and Root, but don't care about custom roms or uv/oc kernels. You can simply use ODIN to flash jt1134's kernel and reboot. It should convert to voodoo on the first boot and you are done.
2. If you want CWM Recovery and the ability to flash custom roms/ kernels in .zip format w/ CWM, You can flash CWM in ODIN and then boot direct to recovery by using the Vol up + Home+ Power button combo, releasing power when samsung logo appers.
Once in CWM flash the rom and kernel of your choice(already on your SDcard) and then reboot.
3. If you want both jt1134's kernel and CWM you just use odin to flash both rebooting in between. First the kernel then CWM.

Once updated
1. Reboot into recovery
2. Wait till you're at the recovery loader
3. Take out battery, disconnect any USB
4. Boot up in loading mode (vol down, plug in USB)
5. When loading screen comes on, you can put the battery back in
6. Use Odin to load the latest CWM (http://forum.xda-developers.com/showthread.php?t=1112804)
7. It'll auto reboot and should put you back into recovery mode. You'll know you're in the right recovery if it's yellow and has the option to install zip from sdcard. If it doesn't take repeat steps 4-6 again (On my wife's phone I had to do it twice)
8. Use CWM to load PBJ's rooted kernel (http://forum.xda-developers.com/showthread.php?t=1104634)
9. reboot
Enjoy!

I too am trying to get guidance on this. I am at what I assume is stock ee4 after taking ota from rooted ed1 flash and I DID lose root.
I flashed the imnuts cwm onto phone a bit ago. It is current file updated yesterday I believe. The problem is that when I go into recovery mode via vol/home/pwr I get into what looks to be still the stock samsung recovery screen with no added options. Then lettering on screen is now blue though where I think it was different prior to flash? Leery of proceeding without some help !!
Thanx In Advance for Any Guidance !!

It has been suggested that you flash the Voodoo kernel after the ROM is installed via CWM it has worked better for many that way.

I tried flashing new cwm using method listed above in reply #7 .... after the flash completed the phone did reboot but to full reboot, it did not boot back to recovery. I shut phone down and go into recovery and it looks to be stock samsung recovery still but lettering is blue:
Android system recovery <3e>
Samsung Recovery Utils for BML
(selections list)
apply sdcard:update.zip
wipe data/Factory reset
wipe cache partition
format internal sd-card
no other options and lettering above is blue
down in screen I have yellow # Manual Mode #
looks to me like cwm flash did not take ?
Edit: Okay I got it !! I flashed again leaving battery out during whole process and now have voodoo cwm ....
On to next step *cringe*

Chopstix9 said:
I tried flashing new cwm using method listed above in reply #7 .... after the flash completed the phone did reboot but to full reboot, it did not boot back to recovery. I shut phone down and go into recovery and it looks to be stock samsung recovery still but lettering is blue:
Android system recovery <3e>
Samsung Recovery Utils for BML
(selections list)
apply sdcard:update.zip
wipe data/Factory reset
wipe cache partition
format internal sd-card
no other options and lettering above is blue
down in screen I have yellow # Manual Mode #
looks to me like cwm flash did not take ?
Click to expand...
Click to collapse
You have to force the phone to recovery mode after flash, by pressing vol up+home+power, releasing power after samsung logo appears. If the phone boots up w/ the stock kernel, cwm is overwritten by stock recovery.

hoppermi said:
You have to force the phone to recovery mode after flash, by pressing vol up+home+power, releasing power after samsung logo appears. If the phone boots up w/ the stock kernel, cwm is overwritten by stock recovery.
Click to expand...
Click to collapse
I flashed again and I am at the CWM Voodoo Lagfix Recovery v 4.0.0.1
I have transfered the imnuts debloated ee4 to the sdcard
I use menu up/down to navigate to selections. After going down to the apply update from sdcard I press the home key to select. It just jumps back up to reboot system now. This happens no matter what selection I attempt to activate using the home key ...
I know I am close, what am I missing here ?
Thanks Tons For The Help

hoppermi said:
There are two ways to root your device. Depending on what you want the end result to be, one way may be quicker than the other.
1. If you want Voodoo and Root, but don't care about custom roms or uv/oc kernels. You can simply use ODIN to flash jt1134's kernel and reboot. It should convert to voodoo on the first boot and you are done.
2. If you want CWM Recovery and the ability to flash custom roms/ kernels in .zip format w/ CWM, You can flash CWM in ODIN and then boot direct to recovery by using the Vol up + Home+ Power button combo, releasing power when samsung logo appers.
Once in CWM flash the rom and kernel of your choice(already on your SDcard) and then reboot.
3. If you want both jt1134's kernel and CWM you just use odin to flash both rebooting in between. First the kernel then CWM.
Click to expand...
Click to collapse
Thanks, I am in same boat, so many threads it is mind boggling.
I see that jt1134's kernel include the voodoo lag fix? What if I just want root. Really all I want it root so I can do some mild de-bloating, but want the phone in a position that if another OTA comes out I can just accept it without worrying.
Thanks!

Chopstix9 said:
I flashed again and I am at the CWM Voodoo Lagfix Recovery v 4.0.0.1
I have transfered the imnuts debloated ee4 to the sdcard
I use menu up/down to navigate to selections. After going down to the apply update from sdcard I press the home key to select. It just jumps back up to reboot system now. This happens no matter what selection I attempt to activate using the home key ...
I know I am close, what am I missing here ?
Thanks Tons For The Help
Click to expand...
Click to collapse
Choose the install zip from sdcard option, then navigate to where debloated rom is and select
Sent from my SCH-I510 using Tapatalk

addictedtocars said:
Thanks, I am in same boat, so many threads it is mind boggling.
I see that jt1134's kernel include the voodoo lag fix? What if I just want root. Really all I want it root so I can do some mild de-bloating, but want the phone in a position that if another OTA comes out I can just accept it without worrying.
Thanks!
Click to expand...
Click to collapse
Sounds like you just want a stock rooted kernel you can flash w / odin. Put in a request in and maybe one of the devs can accommodate you.
For now, I only know of jt's kernel for odin.
Sent from my SCH-I510 using Tapatalk

I'm curious if we will ever see a one click root app for this phone like gingerbreak? What will it take to make it that easy? I have gingerbreak for my tablet(honeycomb 3.0) and it's a snap to switch back and forth.
I only want root to be able to edit some files (starup sounds) and for titanium backup. AND I want to be able to get the OTA updates without having to remeber all the hoops I have to jump through.
I'd gladly pay for a simple root solution for this phone.

I got mine rooted and after many screwups I stumbled onto a 3 step process that was easy as pie. Read my post in this forum 'How I Got to EE4 Root' ....

[Q] Update Verification failed in 3e system recovery

Hi all. I'm new to android, but not to modding. I've been with xda for a few weeks and have appreciated the quality of the posts and tutorials. Btw-I have searched the forums and google and am still soo lost.
Any help would be appreciated.
Goal:
-To get stock kd1
Previous Config:
-Black Ice KD1, CWM recovery red, voodoo lag fix, ext4 on all, Bali 3.2 no uv, Juwe ram script
-was previously overclocked using tegrak ultimate to 1.2ghz, but about a day before my error it had been put back to 1.0ghz and tegrak uninstalled.
What I did (error):
-Boot CWM red wipe data, cache, factory reset
-boot download mode, flash T959VKB5-Custom.tar with Odin 1.7
-Phone reboots into stock android recovery (3e)
-selecting reboot phone bring galaxy s splash, then back to recovery
-selecting reinstall packages; it looks for the update.zip but I keep getting verification failed
What I Know
-verification fails because im using default 3e recovery
-i need to use odin to flash a new kernel with the 2e recovery
What I'm confused about
-All kernels that I've found are .zip, odin takes .tar
-I cant use the .zip kernels because I cant install a package
-I cant install a package because verification fails
-verification fails because using 3e recovery
-cant flash kernel with 2e recovery because i dont know how!
So again all comments are appreciated. Thanks for reading.

Mizun0h said:
Hi all. I'm new to android, but not to modding. I've been with xda for a few weeks and have appreciated the quality of the posts and tutorials. Btw-I have searched the forums and google and am still soo lost.
Any help would be appreciated.
Goal:
-To get stock kd1
Previous Config:
-Black Ice KD1, CWM recovery red, voodoo lag fix, ext4 on all, Bali 3.2 no uv, Juwe ram script
-was previously overclocked using tegrak ultimate to 1.2ghz, but about a day before my error it had been put back to 1.0ghz and tegrak uninstalled.
What I did (error):
-Boot CWM red wipe data, cache, factory reset
-boot download mode, flash T959VKB5-Custom.tar with Odin 1.7
-Phone reboots into stock android recovery (3e)
-selecting reboot phone bring galaxy s splash, then back to recovery
-selecting reinstall packages; it looks for the update.zip but I keep getting verification failed
What I Know
-verification fails because im using default 3e recovery
-i need to use odin to flash a new kernel with the 2e recovery
What I'm confused about
-All kernels that I've found are .zip, odin takes .tar
-I cant use the .zip kernels because I cant install a package
-I cant install a package because verification fails
-verification fails because using 3e recovery
-cant flash kernel with 2e recovery because i dont know how!
So again all comments are appreciated. Thanks for reading.
Click to expand...
Click to collapse
your so use to having the recovery file already put into system/bin so you forgot to do it when you flashed kb5
you see after kd1 it was no longer needed to push the recovery file yourself because its been implemented in all the roms since
so look into krlons CWM final and push the recovery file into /system/bin
then try again you wont get the error

dsexton702 said:
your so use to having the recovery file already put into system/bin so you forgot to do it when you flashed kb5
you see after kd1 it was no longer needed to push the recovery file yourself because its been implemented in all the roms since
so look into krlons CWM final and push the recovery file into /system/bin
then try again you wont get the error
Click to expand...
Click to collapse
Thank you. This definately sounds like the answer I'm looking for. But how would i go about pushing the file to the system if I cant boot my phone?
Will droid explorer still do that?

Mizun0h said:
Thank you. This definately sounds like the answer I'm looking for. But how would i go about pushing the file to the system if I cant boot my phone?
Will droid explorer still do that?
Click to expand...
Click to collapse
I think it'd be easier to get a ROM like this one:
http://forum.xda-developers.com/showthread.php?t=1063696
It already comes rooted so you can throw in the custom recovery file, then go back to a completely stock build (I think that's what you want).
After you flash that rom with odin, get both the files in the first post of this thread:
http://forum.xda-developers.com/showthread.php?t=1099374
You'll be able to get into CWM from there and that'll give you more flexibility.
You probably won't be able to get into download mode from the bootloop you're getting, so do a battery pull, then put the battery back in, hold down both volume keys, and while those are still pressed, press the power button. You should get a screen with a big yellow triangle with an exclamation mark in the middle, which you probably already know is download mode.

Thanks for the quick response. Worked like a charm until, only through impatience, come across another problem.
I was following the steps from this thread
http://forum.xda-developers.com/showthread.php?t=1141550
-I got cwm, flashed ext4 converter, flashed black ice, and then i wanted to install bali 3.1
-By mistake i downloaded the non uv package to the sd card. So out of impatience pulled the sd card and dropped the uv one on their.
-not to my surprise cwm didnt see any changes. so i went to advance, then reboot recovery
Now my phone boots straight to galaxy s splash and stays there. I cant access cwm or download mode. Any ideas?

Did you have bali 2.1 or higher before flashing the ext4 converter? If you don't it will soft brick, from what I know. Flash odin and restart.
Sent from my SGH-T959V using XDA Premium App

Mizun0h said:
Thanks for the quick response. Worked like a charm until, only through impatience, come across another problem.
I was following the steps from this thread
http://forum.xda-developers.com/showthread.php?t=1141550
-I got cwm, flashed ext4 converter, flashed black ice, and then i wanted to install bali 3.1
-By mistake i downloaded the non uv package to the sd card. So out of impatience pulled the sd card and dropped the uv one on their.
-not to my surprise cwm didnt see any changes. so i went to advance, then reboot recovery
Now my phone boots straight to galaxy s splash and stays there. I cant access cwm or download mode. Any ideas?
Click to expand...
Click to collapse
Check your mounts to make sure they are
Code:
unmount
mount
mount
unmount
You'll need to reflash a rom using odin though, you won't be able to use CWM until you do.

Thank you. worked great.

[Q] I'm getting rainbows in my recovery menu

I can't flash anything because when I go to my recovery menu I'm getting rainbows. I'm thinking this is due to the kernel that is flashed with infused v2.0.0. I just downloaded root tools and was going to use the pulldown editor, but when it said not to use on anything other than a Verizon phone, I accidentally hit the ignore button I guess? So I rebooted my phone and nothing was happening, so I pulled the battery and booted into red CWM and reflashed the serendipity rom. I rebooted out of red CWM and phone did not boot, so I went back to red CWM and flashed another rom I had, infused v2.0.0. My phone still did not boot, so I flashed the backup, update.zip and when it finished, I had green CWM, not red anymore. So just to try and get my phone working again, I flashed infused again, and this time it booted, along with the rainbows, as noted in the changelog with infused v2.0.0. So since I knew I could boot now, I rebooted into recovery to flash serendipity again, but the menu is just a rainbow, like on boot. I can navigate the CWM but I can't see anything, and the only reason I know is because I hit the power button, and I rebooted, and the first option in recovery is reboot. I wanna know if there is anyway to replace the kernel so I can see my CWM? or a way to flash serendipity with odin, because the kernel included with that contains no rainbows. Thanks in advance.

pr621 said:
I can't flash anything because when I go to my recovery menu I'm getting rainbows. I'm thinking this is due to the kernel that is flashed with infused v2.0.0. I just downloaded root tools and was going to use the pulldown editor, but when it said not to use on anything other than a Verizon phone, I accidentally hit the ignore button I guess? So I rebooted my phone and nothing was happening, so I pulled the battery and booted into red CWM and reflashed the serendipity rom. I rebooted out of red CWM and phone did not boot, so I went back to red CWM and flashed another rom I had, infused v2.0.0. My phone still did not boot, so I flashed the backup, update.zip and when it finished, I had green CWM, not red anymore. So just to try and get my phone working again, I flashed infused again, and this time it booted, along with the rainbows, as noted in the changelog with infused v2.0.0. So since I knew I could boot now, I rebooted into recovery to flash serendipity again, but the menu is just a rainbow, like on boot. I can navigate the CWM but I can't see anything, and the only reason I know is because I hit the power button, and I rebooted, and the first option in recovery is reboot. I wanna know if there is anyway to replace the kernel so I can see my CWM? or a way to flash serendipity with odin, because the kernel included with that contains no rainbows. Thanks in advance.
Click to expand...
Click to collapse
holy textwall, I can barely read what you typed...
Looks like you flashed an ancient version of Infused (2.0.0 beta - 2.0.0 final fixed the rainbows).
Odin or Heimdall can flash a fixed kernel - http://forum.xda-developers.com/showthread.php?t=1240136 covers how for Heimdall, I'm less familiar with Odin. Watch out, I've heard that Heimdall and Odin can interfere with each other if installed at the same time on Windows.

[Q] Infuse Bricked even after GTG method!

Hey guys so what happened was that I was trying to root my phone through Gingerbread and Odin (as my infuse is Rogers). But I forgot to put in a SD card so now my phone is stuck in reboot loop! I have tried everything you guys have mentioned online! I cleared the user data but no avail. I inserted a SD card, even put on the SGHI997 rom, inserted the folders voodoo and disable-lagfix and still didnt work. I tried unbricking it via GTG but instead my rogers is gone and now I have AT&T and still in a loop! HELP!

Did you look at this post to see if it helps.
http://forum.xda-developers.com/showthread.php?t=1205381

yup i did. It was the GTG process i mentioned that i tired before. the bootlooping has stopped but know is stuck on the samsung screen :S i left at the screen for 30 mins now still nothing. i cant even enter recovery mode anymore

u can not get into download mode??

yeah i still can

Were you able Odin back to stock?

not really, these are the results of odin:
GTG odin process: stuck at samsung screen. Cannot enter recovery mode.
Gingerbread process: goes to clockwordmod recovery (red txt). I wipe sd, wipe data/factory reset, enters bootloop. However can enter recovery mode.
Rogers stock: goes to andriod recovery mode (blue txt). I wipe sd, wipe data/factory reset, enters bootloop. However can enter recovery mode.
so no phone does not go back normal functioning self

sharkray said:
not really, these are the results of odin:
GTG odin process: stuck at samsung screen. Cannot enter recovery mode.
Gingerbread process: goes to clockwordmod recovery (red txt). I wipe sd, wipe data/factory reset, enters bootloop. However can enter recovery mode.
Rogers stock: goes to andriod recovery mode (blue txt). I wipe sd, wipe data/factory reset, enters bootloop. However can enter recovery mode.
so no phone does not go back normal functioning self
Click to expand...
Click to collapse
What Rom were using?
Try checking repartion when you use Odin.

Corvette Dave said:
What Rom were using?
Try checking repartion when you use Odin.
Click to expand...
Click to collapse
From recovery you should be able to get to download.
Try this link with the option to get root & 3e recovery.
http://forum.xda-developers.com/showthread.php?t=1092021
It sounds like you do not have modified 3e installed so it will check for sig?
from there if you install packages 2X you can get to CWM and flash what you will.....
EDIT: Sorry, I see you are able to get to CWM
can you not put a new rom on the SD and flash it? Or start over again with a fresh stock in case there was a glitch in the first install?

I am in the same situation and have the same problem too, i"ve looked lots of post and tried different method,,
even GTG's method it still in boot loop!!!!T^T
can anyone help

Corvette Dave said:
What Rom were using?
Try checking repartion when you use Odin.
Click to expand...
Click to collapse
Hey when you say rom is assume you mean pda kernal files that come with odin and such? Then those would be PDA_ROGERS_UXKG3.tar.md5, PDA_Infuse_Gingerbread.tar.md5, the files the come in GTG unbrick.
I have also did repartion, but it did nothing.
I you mean rom by the SGHI997 rom i tried that too
Edit: Okay so I have been searching online and discovered you need put the room onto the internal sd card. But i dont see how i can do that considering my phone goes to recovery mode straight away
SNadler said:
From recovery you should be able to get to download.
Try this link with the option to get root & 3e recovery.
http://forum.xda-developers.com/showthread.php?t=1092021
It sounds like you do not have modified 3e installed so it will check for sig?
from there if you install packages 2X you can get to CWM and flash what you will.....
EDIT: Sorry, I see you are able to get to CWM
can you not put a new rom on the SD and flash it? Or start over again with a fresh stock in case there was a glitch in the first install?
Click to expand...
Click to collapse
Okay so I have been searching online and discovered you need put the room onto the internal sd card. But i dont see how i can do that considering my phone goes to recovery mode straight away. Even using odin to flash a fresh stock gives same problem

I'd like to bring the UnBrickable mod to this platform which will allow us to flash bootloaders to UnBrickably modded devices.. and seriously mod the crap out of the firmware... If you decide to turn it in for repair, consider PMing me so I can do some reverse engineering on it and then you can turn it in for not being able to turn on
Your device likey requires a PIT flash just so you know.

sharkray said:
Okay so I have been searching online and discovered you need put the room onto the internal sd card. But i dont see how i can do that considering my phone goes to recovery mode straight away. Even using odin to flash a fresh stock gives same problem
Click to expand...
Click to collapse
In CWM (red) under "mounts and Storage, select "Mount USB". Of course you are connect to your computer when you do this and in windows an external drive should become available. Place the zip file on the root of that drive.
Once copied, disconnect from windows first then unmout in CWM. from here you can go directly to and install from zip.
Hope that makes sense.
6

hey i tired what you said. i did a few times nothing came. then on my 4th try the driver showed up on my computer but it said 'please insert drive.' i reset and tried again the drive didnt show up

Remove the sim card and try again. Also,you can always copy a rom to an sdcard and install that in your Infuse.
Cranky...

hey i tried what you said but same result. i cant put on rom on because they mass storage does not show on my pc :S after the odd time of resetting and entering recovery mode, it connects but it says 'insert drive'

follow this link,, i recoverd my infuse 4G using this rom!!!!!!!
THX GTG very much!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
http://forum.xda-developers.com/showthread.php?t=1193927

AdamOutler said:
I'd like to bring the UnBrickable mod to this platform which will allow us to flash bootloaders to UnBrickably modded devices.. and seriously mod the crap out of the firmware... If you decide to turn it in for repair, consider PMing me so I can do some reverse engineering on it and then you can turn it in for not being able to turn on
Your device likey requires a PIT flash just so you know.
Click to expand...
Click to collapse
yes try a pit flash with repartition selected, it might fix it. theses types of bricks have been rare on the infuse and many people dont have experience with them. the available pit is packaged with the att ultimate unbrick but you should probably use it with the rogers odin firmware.

001100 said:
follow this link,, i recoverd my infuse 4G using this rom!!!!!!!
THX GTG very much!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
http://forum.xda-developers.com/showthread.php?t=1193927
Click to expand...
Click to collapse
OMGGGGGGGGGGGGGG YOU ROCK!!!! DUDE! IT works fine and its rooted! Thank you so much!
And thank you everyone else for taking the time to help me out and which ever way you could! This forum is pretty awesome thanks guys!

sharkray said:
OMGGGGGGGGGGGGGG YOU ROCK!!!! DUDE! IT works fine and its rooted! Thank you so much!
And thank you everyone else for taking the time to help me out and which ever way you could! This forum is pretty awesome thanks guys!
Click to expand...
Click to collapse
Sorry it took so long. I'll try to get in touch with GTG to make sure that his unbrick threads are more clear as to which device they are appropriate for.
UCKD5/E3 unbricks will only work on AT&T Infuses
UXKG3 will only work on Rogers Infuses
Custom Gingerbread ROMs will work on both, but there are no Odin-flashable packages for these.

Please Help: Stuck since last 3 days, cannot install any rom

Phone: Rogers i896
I have been through Multiple stock Roms of 2.1, 2.2, 2.3
Lets take a simple example of 2.1 where I flash into CWM, install CM7 but I am stuck in install loop, all it does is tries to install, shows me flashing screen which is way too quick for me to read and but I have managed to read some lines and they probably say
E: Cannot find or Cannot update
No Such file or Directory
Like I said, since last 3 days - whatever I do I am stuck in that. I have tried formatting internal SD Card, tried to install from External SD Card but no go

Boot into cwm, factory reset, install from sd card. If you boot loop, repeat procedure again.

mrhaley30705 said:
Boot into cwm, factory reset, install from sd card. If you boot loop, repeat procedure again.
Click to expand...
Click to collapse
I'l try that but issue is once in loop, cant get into CWM

inningsdefeat500 said:
I'l try that but issue is once in loop, cant get into CWM
Click to expand...
Click to collapse
Sometimes you have to hold the recovery buttons down for a long while, at least 4 or 5 flashes of the i896 page. This worked for me a few times (Rogers i896). But the only thing I found that worked when I got stuck in boot loops was flashing stock Froyo with Heimdall. Can you boot into download mode?

galakanokis said:
Sometimes you have to hold the recovery buttons down for a long while, at least 4 or 5 flashes of the i896 page. This worked for me a few times (Rogers i896). But the only thing I found that worked when I got stuck in boot loops was flashing stock Froyo with Heimdall. Can you boot into download mode?
Click to expand...
Click to collapse
Download Mode - no issues, what is Froyo with Heimdall - at this pt, I am willing to try anything

inningsdefeat500 said:
I'l try that but issue is once in loop, cant get into CWM
Click to expand...
Click to collapse
Pull the battery, reinsert battery,then with phone off, press volume up + volume down + power. Hold those buttons until you see the first boot screen. Hold it about 5 seconds, then release.

OK, so I went to recovery mode - deleted factory/clean - and tried with MIUI - that worked?? can I install CM 7 on top of MIUI?

inningsdefeat500 said:
OK, so I went to recovery mode - deleted factory/clean - and tried with MIUI - that worked?? can I install CM 7 on top of MIUI?
Click to expand...
Click to collapse
That's good to hear. MIUI is a very good ROM and is based on CM7 so there should be no problem flashing CM7.1 from MIUI (I do it all the time). Go into ROM manager and flash CWM to 3.x before flashing CM though.

Sweet, that worked too. I now have CM7 - would it better to CWM and factory reset now? so everything is clean or not recommended and/or doesnt matter?
I have used MIUI - few drawbacks, some apps dont work + screenshot is not as simple as CM7

inningsdefeat500 said:
Sweet, that worked too. I now have CM7 - would it better to CWM and factory reset now? so everything is clean or not recommended and/or doesnt matter?
I have used MIUI - few drawbacks, some apps dont work + screenshot is not as simple as CM7
Click to expand...
Click to collapse
Did you do the wipes in CWM before you installed the zip? If so I wouldn't worry about it if not a reset doesn't hurt.

Copy Rom to sdcard.
Go to download mode (Vol- + Vol+ + USB plug PC)
Use odin and flash to stock JF6
Feed talon 1.2 --> CWM --> factory reset --> install zip file -> choose zip file --> new rom