Related
I've just make another recovery into MY cm10 ATRIX2 (ME865) by accident....
I know it's forbidden to do so
btw, my device is now hang in bootloop
only original recovery is able to use
However, using RSDLite did not recognise my phone
WHat can I do with it???
mj021108 said:
I've just make another recovery into MY cm10 ATRIX2 (ME865) by accident....
I know it's forbidden to do so
btw, my device is now hang in bootloop
only original recovery is able to use
However, using RSDLite did not recognise my phone
WHat can I do with it???
Click to expand...
Click to collapse
You have to put the phone in fastboot mode before trying to use RSD lite, to recover. If you do not know how to do that please look in the noob thread or search, as this has been covered a million times now.
jimbridgman said:
You have to put the phone in fastboot mode before trying to use RSD lite, to recover. If you do not know how to do that please look in the noob thread or search, as this has been covered a million times now.
Click to expand...
Click to collapse
I've tried so
however, RSDLite seems not able to recognise my device and failed to boot in
mj021108 said:
I've tried so
however, RSDLite seems not able to recognise my device and failed to boot in
Click to expand...
Click to collapse
You have tried what? We need a ton more information from you please. Be as specific as possible.
For instance did you get into fastboot mode?
Did windows try and install drivers for the phone in fastboot mode?
What version of firmware are you attempting to flash in RSD lite?
What version of RSD lite are you using?
Were you ever able to use RSD lite before?
Have you uninstalled the motorola drivers and reinstalled them?
Any other pertinent information will be helpful.
Hey! I need all your help, please. Yesterday, I saw that Motorola reveled a tool to unlock the bootloader of our tablet (I know, late). I read all the information about the process, and I could do this on my mz607 wifi. I downloaded all that I need, drivers and android sdk. After that, I rebooted the xoom on bootloader using adb command but....I can't do anything on this!!
I looked for some information about this, and I found in all forums that I can unlock bootloader with "fastboot oem unlock" command. It's false, I cant do nothing!! I rebooted my tablet and now, always run on bootloader and not boot system.
This is my bootloader info:
AP Fastboot Flash Mode (S) (Flash Failure)
0A.6B (sha-h13f845, 2011-11-17 16:40:56)
eMMC Info: Size 16G
Device is LOCKED, Status Code: 0
Battery OK
OK to Program
Connect USB
Data Cable
I found a germany forum with the same problem (I think) but I don't understand how they solved this.This the link
After this, I looked for other solutions and I found a tool of Motorola, RSDLite. I downloaded the correct file for my model, and when it flashing (7 step for the tool) not flash the boot.img! It's flash correctly other file packages (recovery.img, fastboot, etc) but it can't flash boot.img
Now, when I do "vol up+vol down+power" and select "Normal Boot", It doesn't do anything, the system would be missing!
I think it's can be a soft brick....or no, I dont know. I'm very worried about this and I would appreciate all your help.
Thanks. I'm waiting your answer.
Anybody can help me????
Ok, Anybody wants to help me!
Bye.
Re: [Q] HELP! Possible Brick on Xoom MZ607 WIFI
Joshbone said:
This is my bootloader info:
AP Fastboot Flash Mode (S) (Flash Failure)
0A.6B (sha-h13f845, 2011-11-17 16:40:56)
eMMC Info: Size 16G
Device is LOCKED, Status Code: 0
Battery OK
OK to Program
Connect USB
Data Cable
Click to expand...
Click to collapse
You may have tried to flash something before you said you did.
Basically your tablet wouldn't boot do to a failed flash, it said so right on the boot loader.
"AP Fastboot Flash Mode (S) (Flash Failure)"
Either way. You will have to find the fast boot files for your specific device! DO NOT THINK THEY ARE CLOSE ENOUGH it must be your device mz607!
Once you find them simple follow any tutorial on how to fast boot.
If you have trouble finding something just Google my name and you find a few helpful posts and topics.
And on the topic of unlocks. These will never and have not been unlocked. Furthermore a update (from Motorola) would have to update the bootloader for their new(ish) unlock tool.
runandhide05 said:
You may have tried to flash something before you said you did.
Basically your tablet wouldn't boot do to a failed flash, it said so right on the boot loader.
"AP Fastboot Flash Mode (S) (Flash Failure)"
Either way. You will have to find the fast boot files for your specific device! DO NOT THINK THEY ARE CLOSE ENOUGH it must be your device mz607!
Once you find them simple follow any tutorial on how to fast boot.
If you have trouble finding something just Google my name and you find a few helpful posts and topics.
And on the topic of unlocks. These will never and have not been unlocked. Furthermore a update (from Motorola) would have to update the bootloader for their new(ish) unlock tool.
Click to expand...
Click to collapse
So I have to find the same files for my MZ607? boot, recovery and system?
runandhide05 said:
You will have to find the fast boot files for your specific device! DO NOT THINK THEY ARE CLOSE ENOUGH it must be your device mz607!
Click to expand...
Click to collapse
Joshbone said:
So I have to find the same files for my MZ607? boot, recovery and system?
Click to expand...
Click to collapse
Re: [Q] HELP! Possible Brick on Xoom MZ607 WIFI
Mjamocha said:
Click to expand...
Click to collapse
What??
Re: [Q] HELP! Possible Brick on Xoom MZ607 WIFI
Anybody more??
Joshbone said:
Anybody more??
Click to expand...
Click to collapse
Runandhide told you everything you need to know. You need to find the right regioned fastboot file for your mz607 and flash it. And that ypur bootloader is not unlockable. Any tutorial you were reading to unlock it would have to have been for the original xoom, not xoom2.
HELP! Possible Brick on Xoom MZ607 WIFI
Hello, I have the same problem,
I Bricked my MZ607 by flashing a bad "motoboot.img".
That and only that can be flashed!
Have you found a solution? I would also like to unlock the bootloader.
Thanks. I'm waiting your answer.
AP Fastboot Flash Mode (S) (Flash Failure)
0A.6C (sha-c79f1fc, 2011-12-19 11:36:21)
eMMC Info: Size 16G
Device is LOCKED, Status Code: 0
Battery OK
OK to Program
Connect USB
Data Cable
Invalid CG OTV (DG: system): Invalid SP Data
Invalid CG HAB (DG: system, status: 0x0056)
Invalid CG OTV (DG: system)
As I am not I Xoom 2 owner I can't help much.
However, Googling around found a few links that may be useful.
Possible stock files?
http://sbf.droid-developers.org/xoom2/list.php
Factory reset using hardware keys:
https://motorola-global-en-uk.custhelp.com/app/answers/detail/a_id/74653
And there's always:
http://www.xoomforums.com/forum/motorola-xoom-2-forum/
Hopefully this at least helps.
Good luck.
f5bud said:
Hello, I have the same problem,
I Bricked my MZ607 by flashing a bad "motoboot.img".
That and only that can be flashed!
Have you found a solution? I would also like to unlock the bootloader.
Thanks. I'm waiting your answer.
AP Fastboot Flash Mode (S) (Flash Failure)
0A.6C (sha-c79f1fc, 2011-12-19 11:36:21)
eMMC Info: Size 16G
Device is LOCKED, Status Code: 0
Battery OK
OK to Program
Connect USB
Data Cable
Invalid CG OTV (DG: system): Invalid SP Data
Invalid CG HAB (DG: system, status: 0x0056)
Invalid CG OTV (DG: system)
Click to expand...
Click to collapse
Hi, my Xoom is the MZ607 WIFI model, and I fix whit this:
https://drive.google.com/folderview?id=0B5JuUC6auPR-bWJ2cFFUVVNmNFE&usp=sharing
Download the 3 files. First, install the Moto drivers, after that, execute the RSDLite and flash the zip.
Hope I've helped you
Like the genius I am I've bricked mine too. It's a UK MZ607 that's been updated to JB from the US MZ609. I managed to delete the stock browser whilst trying to install a CyanogenMOD browser (long story) so figured I'd just repeat the steps that I used to flash the US MZ609 firmware. What I'd forgotten is that the first stage is to flash the US MZ609 ICS ROM then do an update to JB meaning I was effectively trying to downgrade. Everything flashes successfully except the boot partition which gives an error that it doesn't exist. Any ideas out there? I tried what I believe to be the original Fastboot file but no luck
Joshbone said:
Hi, my Xoom is the MZ607 WIFI model, and I fix whit this:
https://drive.google.com/folderview?id=0B5JuUC6auPR-bWJ2cFFUVVNmNFE&usp=sharing
Download the 3 files. First, install the Moto drivers, after that, execute the RSDLite and flash the zip.
Hope I've helped you
Click to expand...
Click to collapse
Also tried this and it fails when flashing the boot partition. I just ordered a factory cable to see if it can bring it back to life...
Is this zip still available?
alecbond said:
As I am not I Xoom 2 owner I can't help much.
However, Googling around found a few links that may be useful.
Possible stock files?
http://sbf.droid-developers.org/xoom2/list.php
Factory reset using hardware keys:
https://motorola-global-en-uk.custhelp.com/app/answers/detail/a_id/74653
And there's always:
http://www.xoomforums.com/forum/motorola-xoom-2-forum/
Hopefully this at least helps.
Good luck.
Click to expand...
Click to collapse
anybody who still has the mz607 files for a restore? The possible stock files link doesn't work any more...
http://sbf.droid-developers.org/xoom2/list.php
I have been rooting for about a year now, albeit largely with Samsung devices via Odin and CWM Recovery. I now have a Verizon Motorola RAZR HD (xt925) and have been unsuccessful with unlocking the bootloader. I decided to use Safestrap with it, and tried to load Eclipse-v5.0-build2-xt926, reportedly compatible with my XT925... now i am stuck with this screen:
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
AP Fastboot Flash Mode (S)
10.9B(*) (sha-1e9f557, 2013-02-14 09:13:08)
eMMC Info: Size 16GB
Deviced is LOCKED. Status Code: 0
Battery Low
Transfer Mode:
USB Connected
Failed to hab check for boot: 0x56
Fastboot Reason: Boot Failure
usb connected
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
I have been looking to XDA for my answers over the last year. Help would be appreciated. Twenty-five dollars worth of appreciation.
(Yes, I have resorted to bribes....)
Easy fix,
download what ever version of the system software you had on it previously.
Flash it in fast boot mode.
?????
Profit.
Edit: also Verizon RAZRs are xt926 not xt925
Darbness said:
Easy fix,
download what ever version of the system software you had on it previously.
Flash it in fast boot mode.
?????
Profit.
Edit: also Verizon RAZRs are xt926 not xt925
Click to expand...
Click to collapse
Phone identified itself as 925... either way, i am unsure where i can find stock software for it and seem to be unable to flash anything from fastboot, because as it turns out, i am code-retarded. definitely profit when this is solved. I can "cd" through dos and get to where fastboot commands are entered and I have even tried to "fastboot recovery recovery.img" but for the life of me, i must be typing the string incorrectly somehow. But I am excellent at following clear-cut directions. i will try to find a stock image...for motorola, it is a .sbf file, right? If i seem stupid, i apologize, i'm not. just not up on all the nomenclature native to adb and fastboot (or linux). Thanks for helping me though.....i need it.
Ok,
First thing I want you to do is look on the back of the phone, It will have the model on the lower half of it.
Second thing is to find the official software.
For XT96:
http://sbf.droid-developers.org/vanquish/list.php
For xt925
http://sbf.droid-developers.org/vanquish_u/list.php
Flash the ROM file using RSD Lite.
If it dosnt work:
Make sure you have the moto drivers installed.
open up the .xml file in the rom and remove the "getvar" lines.
Still trying
Failed at 16/27 flash system system.img
What version did you try?
VZW_XT926_4.1.2_9.8.1Q_62_VQW_MR-4_VQW_CFC.xml
having a hard time finding other .xml files to use... any non-stock .xml available? really want to get into an AOKP/CM/PAC/Liquidsmooth/Carbon/Paranoid.....whatever is 4.2.2
No, only official roms are packaged like that.
You need to have RSDlite at least Version 6 or higher. Also, edit the xml file as stated here.
If your phone is up & running again you can consider going to another rom either with safestrap or by unlocking your BL, installing a recovery and flashing any ROM you like. As stated above you can only flash Stock FW using RSDLite. All other roms can only be applied with either safestrap or CWM Recovery (or similiar).
HELP-ME
FRIENDS, AFTER I TRY TO INSTALL A ROOM 4.2.2 MY PHONE NO OUT OF AP fastboot.
JA TRIED TO PUT ALL ROOMS OF MOTOROLA BUT NOT RESOLVED.
SCREEN IS BLACK AND PHONE DOES NOT NOTHING COULD HELP ME?: (
apparently my stock recovery is corrupted. I am unable to flash back to stock or apply any updates. the phone hangs at the bootloader unlocked warning screen every time. I have tried everything to try to fix it but nothing works. I extracted the stock recovery and even tried to fastboot flash it but it didn't work either. does anyone have any suggestions? the phone is not rooted, but the bootloader is unlocked. thanks so much is advance.
**also mean to mention that erecovery will not work either. it always says download failed
Mass1veDynam1c said:
apparently my stock recovery is corrupted. I am unable to flash back to stock or apply any updates. the phone hangs at the bootloader unlocked warning screen every time. I have tried everything to try to fix it but nothing works. I extracted the stock recovery and even tried to fastboot flash it but it didn't work either. does anyone have any suggestions? the phone is not rooted, but the bootloader is unlocked. thanks so much is advance.
**also mean to mention that erecovery will not work either. it always says download failed
Click to expand...
Click to collapse
same here. did you managed to work it out?
Solved
eelc said:
same here. did you managed to work it out?
Click to expand...
Click to collapse
Yes finally. You have to download the update file for whatever version of the rom you currently have installed. Then extract userdata, boot, system, and erecovery1 and erecovery2 images. Fastboot flash them in bootloader mode. Reboot device. Shutdown device. Boot to system recovery and do a full system restore. All set.
Mass1veDynam1c said:
Yes finally. You have to download the update file for whatever version of the rom you currently have installed. Then extract userdata, boot, system, and erecovery1 and erecovery2 images. Fastboot flash them in bootloader mode. Reboot device. Shutdown device. Boot to system recovery and do a full system restore. All set.
Click to expand...
Click to collapse
can u make the total tutorial video of this whole process ???
I would ask if you could post a link to the update you used and a list of the commands you used..im in the US ..so it is honor 6x for the US
bricked honor 6x
You need three softwares
1. huawei multi tool by mt,,,,, in english version bro
2. Huawei update extractor
3. Firmware file update .zip
First extract the zip file , there you will get update.app file . Extract BOOT.IMG RECOVERY.IMG SYSTEM.IMG USER DATA.IMG using Huawei extractor software .
NOW open huawei multitool app (internet connection required)
Put all these files you extracted in unbrick folder of huawei multi tool
Follow steps to unbrick your device
Thank you..
can you send the links please....thank you!
Mass1veDynam1c said:
apparently my stock recovery is corrupted. I am unable to flash back to stock or apply any updates. the phone hangs at the bootloader unlocked warning screen every time. I have tried everything to try to fix it but nothing works. I extracted the stock recovery and even tried to fastboot flash it but it didn't work either. does anyone have any suggestions? the phone is not rooted, but the bootloader is unlocked. thanks so much is advance.
**also mean to mention that erecovery will not work either. it always says download failed
Click to expand...
Click to collapse
Try to flash twrp first , later flash stock recovery from twrp by clicking on flash image . Be sure u are installing a working recovery but not a corrupted one
Hi guys,
so after I got my xiaomi with a global ROM and wanted to update and that is when I accidentally relocked the bootloader. The version of ROM was invalid apparently and wouldn't let me boot and now I'm stuck in fastboot mode.
My problem is as follows:
-can't enter recovery, stuck at fastboot no matter how many times I try and reboot
-adb not working since I didn't enable it
-bootloader locked (miflash says so and it can't unlock it since I didn't check 'oem unlock enable' and I cannot boot ROM so I can't enable it)
-fastboot flashing says 'not allowed in lock state'
-edl mode not available
I've seen tutorials where people opened their phones to force the phone into edl mode via the testing points but is that the only way`?
Any suggestions on how I could unbrick it?
Much appreciated
yes, it is the only way.
koniv90 said:
Hi guys,
Any suggestions on how I could unbrick it?
Much appreciated
Click to expand...
Click to collapse
you can use this tool to flash the phone on fastboot mode
Xiaomi King Tool - Home.
xiaomikingtool.com
its cost you only 5 credit
Can you flash files by fastboot? if so, flash the global rom images one by one, then reboot
I know this is a late reply, but I was in a similar situation with my phone and here is how I dealt with it: You need to access EDL mode, it doesn't require disassembling the device like the other user here suggested. Here is a thread you can find several variations of fixes here: https://forum.xda-developers.com/t/xiaomi-12-pro-completely-bricked-dead.4422997/
If anyone needs help with a locked bootloader bootlooped phone and doesn't know what to do I can help for a fee.
eclipsek20 said:
I know this is a late reply, but I was in a similar situation with my phone and here is how I dealt with it: You need to access EDL mode, it doesn't require disassembling the device like the other user here suggested. Here is a thread you can find several variations of fixes here: https://forum.xda-developers.com/t/xiaomi-12-pro-completely-bricked-dead.4422997/
If anyone needs help with a locked bootloader bootlooped phone and doesn't know what to do I can help for a fee.
Click to expand...
Click to collapse
I need help please my phone redmi k50 gaming is no recovery and . bootloader is locked
eclipsek20 said:
I know this is a late reply, but I was in a similar situation with my phone and here is how I dealt with it: You need to access EDL mode, it doesn't require disassembling the device like the other user here suggested. Here is a thread you can find several variations of fixes here: https://forum.xda-developers.com/t/xiaomi-12-pro-completely-bricked-dead.4422997/
If anyone needs help with a locked bootloader bootlooped phone and doesn't know what to do I can help for a fee.
Click to expand...
Click to collapse
Please I have pocophone f1 which says system has been destroyed I have downloaded the firmware xiaomi_poco_f1_V12.0.2.0.QEJRUXM_20200907.0000.00_Gobal_10_XFT (by xiaomistockrom.com) and Qualcom Driver V1.0 and MiFlash tool 20210226 and ADB drive R13 and MiFlash unlock tool en-3.5.1128.45 and platform tool r33.0.3-windows after installing all this drives the phone doesn't want to flash when I use MIFLASH TOOL to flash it say ERROR FLASH IS NOT ALLOWED IN LOCK STATE MODE. when I use windows powershell it says the same thing it looks like the bootloader is lock and I don't know the xiaomi e-mail, number and password on the phone pls help me
This what I'm facing
Dims_Camper said:
yes, it is the only way.
Click to expand...
Click to collapse
So even with a locked bootloader and disabled developer options, I can still flash stock rom in edl mode, regardless?
kskksks said:
So even with a locked bootloader and disabled developer options, I can still flash stock rom in edl mode, regardless?
Click to expand...
Click to collapse
Nope, only very old devices.
NOSS8 said:
Nope, only very old devices.
Click to expand...
Click to collapse
So that's why I get the error "operation not allowed for write" in QFIL... What do i do then? Is there a way to unlock bootloader in edl mode? I can't access recovery mode because of the bootloop... Only EDL mode
kskksks said:
So that's why I get the error "operation not allowed for write" in QFIL... What do i do then? Is there a way to unlock bootloader in edl mode? I can't access recovery mode because of the bootloop... Only EDL mode
Click to expand...
Click to collapse
Have you tried to flash stock rom?
I mean, if you have Chinese rom before, just flash with latest Chinese rom.
Ghanaba said:
Please I have pocophone f1 which says system has been destroyed I have downloaded the firmware xiaomi_poco_f1_V12.0.2.0.QEJRUXM_20200907.0000.00_Gobal_10_XFT (by xiaomistockrom.com) and Qualcom Driver V1.0 and MiFlash tool 20210226 and ADB drive R13 and MiFlash unlock tool en-3.5.1128.45 and platform tool r33.0.3-windows after installing all this drives the phone doesn't want to flash when I use MIFLASH TOOL to flash it say ERROR FLASH IS NOT ALLOWED IN LOCK STATE MODE. when I use windows powershell it says the same thing it looks like the bootloader is lock and I don't know the xiaomi e-mail, number and password on the phone pls help me
Click to expand...
Click to collapse
Try to flash the .img files of the fastboot rom, unzip the rom and find all the .img files and flash them with CMD from fastboot, one by one
jholfran3 said:
Try to flash the .img files of the fastboot rom, unzip the rom and find all the .img files and flash them with CMD from fastboot, one by one
Click to expand...
Click to collapse
Hello, My Poco X3 System destroyed itself while I was using it, it showed a glitch screen and turned off. Now I went to flash my mobile through Miflash but it showed the bootloader is locked and now I can't unlock it as the system itself is destroyed and can't do anything. So i wanted to know if i can flash my mobile with cmd as you said above flashing img files one by one or let me know if there is any method to flash my mobile or unlock the bootloader? Please me help bro
flashing is possible with modified firehose programmer (no auth factory loader) or with authorized xiaomi account. both solutions are paid service and cannot advertised here.
please -as always- read the thread you posted in. I can see useful information shared already. wait for other replies.
letsgofly said:
Hello, My Poco X3 System destroyed itself while I was using it, it showed a glitch screen and turned off. Now I went to flash my mobile through Miflash but it showed the bootloader is locked and now I can't unlock it as the system itself is destroyed and can't do anything. So i wanted to know if i can flash my mobile with cmd as you said above flashing img files one by one or let me know if there is any method to flash my mobile or unlock the bootloader? Please me help bro
Click to expand...
Click to collapse
Hi, try to flash the .img files from the fastboot stock rom whit cdm in fastboot, one by one, some files will give error but skip that, then reboot the phone as normal, it should work.
example:
fastboot flash boot boot.img
fastboot flash cust cust.img
etc.
jholfran3 said:
Hi, try to flash the .img files from the fastboot stock rom, one by one, some files will give error but skip that, then reboot the phone as normal, it should work.
Click to expand...
Click to collapse
If it were that simple, it would have been known for a long time.
You have already posted about this (post#14).
NOSS8 said:
If it were that simple, it would have been known for a long time.
You have already posted about this (post#14).
Click to expand...
Click to collapse
I had a Mi 9T and by mistake I installed a recovery that didn't correspond to it, the phone got bricked, and the only way to save it was like this, I searched and read everywhere but I couldn't find a solution, flashing the .img files was my idea, I didn't know if it would work but it did.
:V
jholfran3 said:
I had a Mi 9T and by mistake I installed a recovery that didn't correspond to it, the phone got bricked, and the only way to save it was like this, I searched and read everywhere but I couldn't find a solution, flashing the .img files was my idea, I didn't know if it would work but it did.
:V
Click to expand...
Click to collapse
To install a recovery, the bootloader must be unlocked.