Related
Firstly.... go here and read this -
http://batteryuniversity.com/learn/article/charging_lithium_ion_batteries
The battery is fully charged when it is at 4.2 Volts and fully discharged at some predefined voltage (Lets say 3 volts).
The phone can measure these voltages directly from the battery. To see the voltage of your battery type *#*#4636#*#* into your phone and go to battery information.
If all that is so then what is the point or need of "recalibrating" and deleting battery stats and all that.
It seems logical to me that battery stats is just the place where your battery usage history is stored and nothing else.
Can someone confirm this or convince me otherwise?
(I rotate between 3 batteries and cannot grasp the idea that my phone can't consistently measure the charge level of the battery and operate accordingly.)
Measuring the Voltage to get the charge level is not very accurate, and has to be done with no load on the battery (that is, when its not in your phone).
So the phone has to count "energy used from"/"energy stored in" the battery for an accurate display. (called "Coloumb counter")
Did some test
I did a test on new a battery a while ago. Measure voltage when the battery completely empty and fully charged.
Empty battery
1% remaining, using SystemPanel
Take the battery out and measure it with Multimeter
Fully charged
100% charged
Again, measure it with Multimeter
The voltage showed on the phone using SystemPanel app is quite accurate with 0.04V margin of error. Most smart electronic measure lithium battery capacity according to the remaining voltage. In this case, fully charged SGS is 4.2V, empty is 3.5V.
Me too, don't know why we have to delete batterystats.bin to recalibrate battery indicator But I do know that SGS keep track on power consumption on each of its component/application. Its a little bit silly if SGS reads batterystats.bin and display it as battery indicator.
Yet again how is this android development.
Sent from my GT-I9000 using XDA App
xufos said:
I did a test on new a battery a while ago. Measure current when the battery completely empty and fully charged.
Empty battery
1% remaining, using SystemPanel
Take the battery out and measure it with Multimeter
Fully charged
100% charged
Again, measure it with Multimeter
The current showed on the phone using SystemPanel app is quite accurate with 0.04V error margin. Most smart electronic measure lithium battery capacity according to the remaining current. In this case, fully charged SGS is 4.2V, empty is 3.5V.
Me too, don't know why we have to delete batterystats.bin to recalibrate battery indicator But I do know that SGS keep track on power consumption on each of its component/application. Its a little bit silly if SGS reads batterystats.bin and display it as battery indicator.
Click to expand...
Click to collapse
Thanks for that, but you were actually measuring the Voltage, not current (Amperes).
In any case, for laptop Li-ion batteries there is normally a capacity counter (Coulomb counter) that reports the capacity in terms of mAh (milli-ampere hours). It can normally report the remaining capacity, maximum capacity, design capacity, and can be used to measure the *actual* power drain (in terms of Watts).
I wonder if Android has APIs that let apps access that kind of information?
Not really sure about this, but:
Phone seems to measure both voltage & discharge speed, "predicting" remaining charge.
It happens that after a flash battery indicator jumps to a higher value (not compatible with the couple of minutes of dc connection it had), and fall to a way too low value after any battery intensive task (a few minutes of audio call are enough), once more not compatible with the real usage.
I should inspect android code to be shure of this, but I suspect batterystats.bin is used to keep track of battery usage and to this sort of prediction, while a firmware flash seems to mess somehow the measurement.
Edit: this is based on my direct experience, even if on just "empirical" tests. I'll take a look to code asap
'mkay, battery talk... always interesting to see what people make of this.
Let's help out all the misunderstandings here and start with the basics
First of all: read the basics on Li-ion batteries:
http://electronics.howstuffworks.com/lithium-ion-battery.htm
second:
you DON'T measure your voltage when your battery is disconnected. Because it will rise to the normal values of the battery after a while. When you connect it, and use it, the voltage will lower. Compare it to a garden hose. if you let water run out, the presure drops and water starts flowing (presure is voltage, flowing is the current). If you measure the presure when there is no water running, the presure will always mount to the default value, even if there is "not much water left in the tank". But when it starts running again, it could very well run out very fast. So in comparison: voltage says something, but only when you "use" it.
Third:
When a battery ages, it's characteristics change, it will be full... and then all at once, empty. It's not linear. So calculating the capacity is always a bit "guessing". (compare it to stones in your water tank... they don't give you water, the tank doesn't change, but all of a sudden, you're out of water).
conclusion:
capacity of a battery is a very tricky thing to do, it's a combination of voltage, current, age... so the best way to determine capacity is by using the history of the battery as the "guide" to the future. Resetting the battery statistics will remove that history and your phone will have to "learn" it's behavior again. If you don't reset your stats, your values will become more reliable over time (depending of course on the time the stats are kept )
For those who speak dutch, i put a complete battery description/howto/misunderstandings post on www.modelbouwforum.nl (search for posts of "harrydg")
If there are more questions or so, just ask, i'll try to help out as much as possible...
wow harrydg that's great explanation, wish you were my physics teacher back in high school
someone add this post to the main FAQ!
I just wanna write it in a simpler way:
You've access to the battery stats from the kernel. And of course its current consumption which is measured not voltage. Voltage doesn't tell all that much. During high draws your voltage (at the battery level) can fluctuate quite a bit.
There's a regulator (or probably a bunch of them) get a stable voltage no matter what the input voltage is (well, still it has to be in the 3.3/5v range probably else the regulator burns)
Anyway, that's also why the battery stats have to be calibrated, while you can measure how much current is used (in maH aka milli amp per hour, or in mA aka "instant" milli amps), you don't know the battery capacity.
Not only the battery capacity changes from battery to battery but it also changes during the life time of the battery.
The *only* way to calibrate the battery, is to delete the stats, have a fully charged phone and let it drain out the battery until it turns off. That way the kernel will measure for example 1457mah used until it ran out of juice, and that's your battery capacity then. Having the full capacity allows the kernel to give you a rather precise estimate of your current battery status (eg "80%" that you see on the top of the screen) (of course the actual calculation is a bit more complicate but that's the basics)
If calibration stats storage is changed for any reason (probably kernel upgrade or just a whacky samsung implementation that gets corrupted for some reason) you need to delete it and make a new one to recalibrate.
If you want to make it simpler, make it at least correct...
"Anyway, that's also why the battery stats have to be calibrated, while you can measure how much current is used (in maH aka milli amp per hour, or in mA aka "instant" milli amps), you don't know the battery capacity."
First of al, it's mAh, which means milli ampere hour, NOT per hour, that would be mA/h, which it is not.
mA is milli ampere, which is a current
there is a significant difference between the 2.
the first is "capacity"
the second is "current"
it's like a bottle. The capacity is 2l and you pour at 1l per minut...
so... make it simple please...
My guess is, that android is measuring the known min and max by the battery reported values, stores them and calculates the percentages.
So it is device and battery independent.
harrydg said:
If you want to make it simpler, make it at least correct...
"Anyway, that's also why the battery stats have to be calibrated, while you can measure how much current is used (in maH aka milli amp per hour, or in mA aka "instant" milli amps), you don't know the battery capacity."
First of al, it's mAh, which means milli ampere hour, NOT per hour, that would be mA/h, which it is not.
mA is milli ampere, which is a current
there is a significant difference between the 2.
the first is "capacity"
the second is "current"
it's like a bottle. The capacity is 2l and you pour at 1l per minut...
so... make it simple please...
Click to expand...
Click to collapse
Sorry a typo and no caps deserve heavy flaming
bilboa1 said:
Sorry a typo and no caps deserve heavy flaming
Click to expand...
Click to collapse
hehe, sorry for the rant, but if you want to put it simple, make sure the terminology and abbreviations are correct. If not, people will take over the mistakes and conversations will go totally wrong because of misunderstandings...
Thanks very much for the feedback guys. It makes more sense now.
It's using batterystats to get familiar with discharge rates in order to give an accurate estimation of remaining charge and a prediction of when it will run dry.
Can it misreprasent these values and forcibly power down the phone when there is still charge remaining?
And likewise can it stop the charging process prematurely, estimating the battery to be at 100% charge when it is lower?
Is this the reason to recalibrate?
Heres one thing what I noticed about the battery stats, some say deleting it fixes the guage and does not really recalibrate the battery, I really doubt there is a way for end users to do that, even if you never delete the battery stats bin and your drain is pretty fast, it significantly slows down when your battery hits around 25~35, the lower the power on the battery the more accurate it can be represented regardless of the calibration. This is applicaple for the SGS only.
Now it comes to the question..
If the phone create battery stats every time the phone reboot, then when is the best time to delete and the best way to calibrate?
This is what I normally do..
..delete stats at 5%, let it run dry til it turn itself off, dont turn on but connect the charger til it fully charged. Turn phone on and ill have fully charged battery along with fresh stats.
Is this correct?
vosszaa said:
Now it comes to the question..
If the phone create battery stats every time the phone reboot, then when is the best time to delete and the best way to calibrate?
This is what I normally do..
..delete stats at 5%, let it run dry til it turn itself off, dont turn on but connect the charger til it fully charged. Turn phone on and ill have fully charged battery along with fresh stats.
Is this correct?
Click to expand...
Click to collapse
On the SGS theres no real point in deleting it, unless you dont really wanna see the battery go down to 35% and stay there for a while, how ever busted your battery indicator is it gets very accurate as the lower it goes.
I never found batterystats made any difference. What did make a difference is the rom or kernel, what widgets, lagfix e.t.c
If you get more than 1% battery drain per 5hr standby then something is wrong
Sent from my GT-I9000 using XDA App
android53 said:
I never found batterystats made any difference. What did make a difference is the rom or kernel, what widgets, lagfix e.t.c
If you get more than 1% battery drain per 5hr standby then something is wrong
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
I find that conclusion quite flawed.
First of all, what's your definition of standby?
3g on? Wireless on? Autosync on? There are also noticeable differences between different firmwares and between 2.1 and 2.2.
In addition, most people are reporting somewhere around 1% per 1 hour standby or 1% per 2 hour standby, which it what I have been experiencing as well. Sometimes, apparently for no reason, it can drain faster than that, maybe 1% per 0,5 hour or more. I think this might be some widgets fault.
1%/5h standby 3g no sync
i get 1%/2h with data and sync
Depends on your reception, im just basically saying if your losing say 8% battery overnight or more then something is wrong unless your polling several push email accounts
Hi folks - this is the first thread I have started, hence requesting the non-noobs to go easy on me... (this forum is a scary-kind-of-cool)
I mustered up the courage to install Infused 1.5.0 on my stock... the instructions were superb and everything went great... really enjoying the improved speed and looks. But my battery life has degraded. It has been more than a week since I flashed my phone - and it is only getting worse. Now I have read a lot about how Infused is getting great battery life for some folks... and i have gone through those threads, trying to figure out what I am doing wrong. This is my typical usage profile
1) I put the phone on charging before I go to sleep... when I wake up (around 7 AM) it is fully charged.
2) I quickly check overnight messages, finish the daily ablutions, and 30 min later when I check the phone it is already at 95%.
3) By 10 AM, I have made a few long phone calls (no bluetooth) (totalling 60-90 minutes) - and the battery is down to 75%
4) At work I use a bluetooth A2DP headset - maybe 30-40 min of calls and by 12 I am at 50%.
5) More calls in the afternoon, intermitted mail checking and sometimes 30-40 minutes of music streaming on my bluetooth headset - and by 6 PM my phone is down to critical level 12-15%.
This is in now way the same experience that others are having with the Infused ROM and with the Infuse phone in general.
Other points:
6) I run Juice Defender... (don't know if it helps)
7) My screen brightness is just a few notches over 0%
8) My data is always on - except when I am using Wifi of course
9) I turn bluetooth off when I am not using it
So that's the story guys... and I would eternally grateful if the awesome folks out here can help me figure out what I am doing wrong... or there is some logic behind the sad battery life of what is otherwise the best phone that I have ever owned.
It depends how long Infused has been running on your system. After about 3 days I noticed my phone was adjusting to the ROM and the battery life improved significantly. Aside from that, try this trick. Drain your battery next to nothing and then charge all the way. Do this a couple of times. Not quite sure about the logistics but it seems to work. Another thing that has improved my battery life is to make sure I don't have background apps running. You can check this by going into apps > manage apps > and then running. Sometimes Media Hub will begin a background process and that eats up a whopping 8 MBs alone. Force close these pointless background apps and you should see an improvement there as well.
have you conditioned the battery and reset battery stats?
popesmasseuse said:
It depends how long Infused has been running on your system. After about 3 days I noticed my phone was adjusting to the ROM and the battery life improved significantly. Aside from that, try this trick. Drain your battery next to nothing and then charge all the way. Do this a couple of times. Not quite sure about the logistics but it seems to work. Another thing that has improved my battery life is to make sure I don't have background apps running. You can check this by going into apps > manage apps > and then running. Sometimes Media Hub will begin a background process and that eats up a whopping 8 MBs alone. Force close these pointless background apps and you should see an improvement there as well.
Click to expand...
Click to collapse
Thanks popesmasseuse (you really aren't are you?)... the ROM has been running now for a week... gets worse rather than better. I do typically wait for my battery to drain completely before I charge it... but when I do have to do it at 7 PM - then I can never charge it fully, before I have to start using it again. I wonder if the fact that my phone goes through "micro charges" is a reason for my declining battery life...
Will check the running apps... and see if closing them improves things... thanks!
Fact: Installing a ROM greatly improves battery life... Try it....
Turn of GPS and Bluetooth when not in use.
Same here I uninstalled media hub... period... just useless...
Phone calls are a pretty heavy battery drain. Sounds like you're in call for hours each day. Most people don't talk on the phone more than a few minutes a day. Poor signal will also significantly reduce your battery life... how many bars you usually have at work?
My battery life got better the longer I had the infused ROM. But personally I only talk on the phone maybe a total of an hour each day, but I am constantly using internet and youtube, and if I have spare time I'm using my Kindle app to read some books. I keep my GPS, sync, and wifi on all day long and my brightness all the way up (I just can't stand a dim screen lol) and by the time I got home today my battery was at 40%, which I am perfectly fine with.
gtg465x said:
Phone calls are a pretty heavy battery drain. Sounds like you're in call for hours each day. Most people don't talk on the phone more than a few minutes a day. Poor signal will also significantly reduce your battery life... how many bars you usually have at work?
Click to expand...
Click to collapse
Ah...the man himself.
Yes I talk a lot on the phone - nature of the job. 3 hours minimum in a day. Signal at home is terrible - 15% strength... that could be the reason why the battery runs dry after the morning routine. Any way to offset that?
At work signal is great. But in office I also tend to use my desk phone more...
hydrogenman said:
have you conditioned the battery and reset battery stats?
Click to expand...
Click to collapse
Err... no... Noob alert!!!
How does one do that?
http://forum.xda-developers.com/showpost.php?p=14912331&postcount=7
Read this post in another battery thread I am doing this right now to see how it performs afterwards.
Read the thread in my sig.
Never use task killers.
For me, battery life on phones gets good after about 2 weeks or so.
With light to medium use I can easily go for 2+ days.
Consider not streaming music through Bluetooth. Also don't auto sync stuff every 15 mins. If you can use Gmail they use Push notification. I'm on my phone all day literally and I make it home with some battery left. BTW connect to a Wi-Fi when ever possible, 3g data streaming will kill your battery quick.
Sent from my SAMSUNG-SGH-I997 using XDA Premium App
Blackberrynomore said:
http://forum.xda-developers.com/showpost.php?p=14912331&postcount=7
Read this post in another battery thread I am doing this right now to see how it performs afterwards.
Click to expand...
Click to collapse
has anyone tried this method?
It's a Lithium-Ion battery which means it does NOT respond to "conditioning".
"Reconditioning a battery involves completely discharging the energy from a battery then recharging the
battery. Li-Ion batteries do not require reconditioning to maintain good battery performance since Li-Ion
does not have a memory effect. It is necessary to complete drain and then recharge a Li-Ion battery in
order to determine its current capacity level, but that is not the same thing as reconditioning the battery. Li-
Ion batteries do not have a condition that needs to be reconditioned." lxe.com
andrawer said:
It's a Lithium-Ion battery which means it does NOT respond to "conditioning".
"Reconditioning a battery involves completely discharging the energy from a battery then recharging the
battery. Li-Ion batteries do not require reconditioning to maintain good battery performance since Li-Ion
does not have a memory effect. It is necessary to complete drain and then recharge a Li-Ion battery in
order to determine its current capacity level, but that is not the same thing as reconditioning the battery. Li-
Ion batteries do not have a condition that needs to be reconditioned." lxe.com
Click to expand...
Click to collapse
Keiht's tutorial is effectively a technique called "bump charging" for putting that last extra percent or two of charge into a battery. However - with Li-Ion batteries, charging like this will SEVERELY reduce their charge cycle lifetime.
The only thing that "calibration" should affect is how your device reports battery charge level, NOT actual power usage. You should get the same total battery life whether your device is "calibrated" or not, with the exception possibly of the device shutting off prematurely because it thinks the battery is lower than it really is.
Entropy512 said:
Keiht's tutorial is effectively a technique called "bump charging" for putting that last extra percent or two of charge into a battery. However - with Li-Ion batteries, charging like this will SEVERELY reduce their charge cycle lifetime.
The only thing that "calibration" should affect is how your device reports battery charge level, NOT actual power usage. You should get the same total battery life whether your device is "calibrated" or not, with the exception possibly of the device shutting off prematurely because it thinks the battery is lower than it really is.
Click to expand...
Click to collapse
I would have to agree with you. I followed his directions as i was having horrible battery issues after going to 1.5.0 and it seems to have helped the reporting as far as I can tell. I think the big problem and it is only a guess is how the phone is reporting the battery condition not actual battery left. In any event I am running JD and the longer I run with 1.5.0 the battery seems to be lasting a lot longer but I have ti disable most everything which hobbles the phones best features to get that battery life still searching for the perfect solution.
Battery drainage has been a major frustration for me with my phone. The frustration stems from the many variables associated with battery drainage. For the most part the terrible battery drainage started after flashing the modified ROMs. I believe the stock ROM was respectable when it came to battery drainage.
I am not ignorant to flashing ROMs. I have tried everything to figure out this battery problem; everything to keeping stock kernals, to battery calibration (delete battery stats), to battery bump charging, to matching radio files with RILs, to limiting data syncing, charge cycles etc.
But I am noticing that some of you are able to get good battery usage from a single charge with these modified ROMs. With that said, I want to cut the variables down and see what those folks who are getting over a day's worth of battery usage from a single charge are doing. The best indicator for battery usage to limit variables would be the battery usage standby rate with data network on.
I am not getting any better than 8%/hour on standby for any of these ROMs. That is crap. I wake up in the morning after 8 hours and there is only ~35% battery left. Unacceptable. I figure no more than 10% should be lost in 8 hours of standby.
So for those who have good battery usage, please answer the following questions so that we can eliminate all the variables.
1. What is your standby battery drainage rate?
2. What version phone do you have (TMoUS or EUR)?
3. Clockwork Recovery version?
4. What ROM are you using?
4. What Radio and RILs are you using?
5. How many charge cycles are you doing after the battery calibration and before you are getting the good standby rate?
6. Are you using any battery saving applications?
Please help if you can. Everyone seems to emphasize speed and performance but battery life is number one priority for any phone in my opinion.
Thanks
I'm currently running the P3D Neon ROM. I was having the same issues you are having due to flashing a new ROM jsut about every day. The big thing I noticed is that the longer I stayed with the one ROM the better my battery was. But as I'm sure you already know that no matter what a smartphone is a battery hog anyway.
By the way have you tried this, I am using it and love it !
http://forum.xda-developers.com/showthread.php?t=1128568
Tmobile model sensation
Latest radio with .56
Latest LeeDroid
Anker battery
Latest cwm
Do a charge cycle every time my battery dies
I use battery calibration app from market
No battery saving apps
Standby I have no clue lol it sometimes doesn't budge but sometimes I get 1% every hour and 1/2
Light use I get 26+ hours.
Medium I get 16+
Heavy I get 9+
Hope that helps.
Sent from my HTC Sensation Z710e using XDA Premium App
I've had my phone a week and am using stock Rom. I've S-Off, Root and install backup. Overnite, the battery only goes down 5%
If I were u, I'd get Android Assistant from the Market and check that all apps are closed. Check ur start-up apps and clear ur cache before u shut down ur phone.
Sent from my HTC Sensation
More than likely, there are apps that are not allowing the phone to sleep when the screen is off. CPUstats will show you how long your phone has been in deep sleep, as well as your CPU clock speed.
Here is what I would try out:
1-Get CPUstats.
2-Turn off the screen for the night
3-Check to see how long the phone was in deep sleep mode. It should have been for awhile if not, you have a rogue app that is bothering your phone while it sleeps.
To check your standby current:
So far, we cannot accurately see what it is. I dont know of any app that can for our phones. I do know that the values I see cannot be correct, otherwise my phone wouldnt be lasting long.
1-Write down your current battery capacity in mA/Hrs.
2-Write down the time that you put your phone into sleep.
3-Leave it off for an hour.
4-Wake it up and check the new battery capacity.
An Example:
I started with 1900mA/Hr.
I let it sleep for 1 hour.
I found that after an hour, I was down to 1850mA/Hr. That is 50mA gone, over 1 hour time. So my standby current was 50mA/Hrs.
Now this is only a crude way of judging whether or not your phone is behaving. Since the battery apps update capacity every 5 mins or so, you may not be right on the money, but you WILL know if something is BAD. Calculating 50mA +/- 20mA means the phone is likely sleeping as it should. Calculating 300mA+/- 20mA means something is USING your phone without your permission.
Youll need to find out if some apps are syncing (or trying to sync) while it sleeps. Or, your phone may be trying to improve your signal strength.
Matt
The anker battery will help but it is not solving the problem. We need to be getting around 1-2%/hour standby drain like some of you guys are getting.
mrg02d said:
More than likely, there are apps that are not allowing the phone to sleep when the screen is off. CPUstats will show you how long your phone has been in deep sleep, as well as your CPU clock speed.
Here is what I would try out:
1-Get CPUstats.
2-Turn off the screen for the night
3-Check to see how long the phone was in deep sleep mode. It should have been for awhile if not, you have a rogue app that is bothering your phone while it sleeps.
To check your standby current:
So far, we cannot accurately see what it is. I dont know of any app that can for our phones. I do know that the values I see cannot be correct, otherwise my phone wouldnt be lasting long.
1-Write down your current battery capacity in mA/Hrs.
2-Write down the time that you put your phone into sleep.
3-Leave it off for an hour.
4-Wake it up and check the new battery capacity.
An Example:
I started with 1900mA/Hr.
I let it sleep for 1 hour.
I found that after an hour, I was down to 1850mA/Hr. That is 50mA gone, over 1 hour time. So my standby current was 50mA/Hrs.
Now this is only a crude way of judging whether or not your phone is behaving. Since the battery apps update capacity every 5 mins or so, you may not be right on the money, but you WILL know if something is BAD. Calculating 50mA +/- 20mA means the phone is likely sleeping as it should. Calculating 300mA+/- 20mA means something is USING your phone without your permission.
Youll need to find out if some apps are syncing (or trying to sync) while it sleeps. Or, your phone may be trying to improve your signal strength.
Matt
Click to expand...
Click to collapse
I like this test, I will check it out.
I have had quite bad battery drain issues for a while, and searched BBS dump files and forums for an answer, but the logs appear normal with no unusual wakelocks. In short, the battery consumption profile is OK but it just goes too fast. So I concluded I needed a new battery and was too cheap to buy Samsung original battery and instead got a noname type (same capacity, 1500 mAh).
But it didn't help. Still 12-16 hr standby with low use (<1 hr screen time at lowest brightness).
So I tested the health of the two batteries by draining them as fast as possible. I used the app "Battery Drain" (https://play.google.com/store/apps/details?id=com.fuzzyoneapps.BatteryDrain) and drained using full screen brigtness, wifi, bluetooth, gps, CPU but NOT the vibrate function.
The results are attached to this post. As observed, there's no big difference between the two batteries. And I don't know what to expect.
So now I'd like someone else to do the same test so that we can compare the results
Basically, just 1) Run the app with all the settings turned on except vibrate, 2) make note of battery percentage, 3) leave it for exactly one hour, and 4) check percentage again. Is ~45% per hour normal for the nexus s?
Thanks in advance
When I use programs that read battery stats, like GSam or Battery Monitor Widget, both of them says that when my battery is full (100%), the voltage is at 4330-4336 mV, which afaik is too much for a Li-ion battery.
My friend with a Galaxy S4 said that when he was charging his phone (was at 70% at the time), the sensor was reading 4313 mV.
But when he got to 100% it dropped to 4266 mV.
Is my battery really at 4.3V or the android sensor is a little off?
Despite the fact that two times already when my phone was below 50% it shutdown overnight (there's a thread here that many others are having something similar), I don't know if my battery is crazy or just the android.
ar_15 said:
When I use programs that read battery stats, like GSam or Battery Monitor Widget, both of them says that when my battery is full (100%), the voltage is at 4330-4336 mV, which afaik is too much for a Li-ion battery.
My friend with a Galaxy S4 said that when he was charging his phone (was at 70% at the time), the sensor was reading 4313 mV.
But when he got to 100% it dropped to 4266 mV.
Is my battery really at 4.3V or the android sensor is a little off?
Despite the fact that two times already when my phone was below 50% it shutdown overnight (there's a thread here that many others are having something similar), I don't know if my battery is crazy or just the android.
Click to expand...
Click to collapse
mine reads around the same mV when fully charged so think yours is normal,my battery dropped down too 50% or less a couple of times but never actually shut down.
im running back on jellybean now as i prefer it and the battery is perfect but that could be just coincidence.
I have tried asking Motorola customer care for the care . No answer yet from them . Have a similar post here . I think Motorola uses some different kind of battery technology with higher voltages . But yet to recieve any solid reply on the same . Meanwhile I think my battery's peak voltage has gone down from 4.325 to 4.29 and as a result I am experiencing battery drop from 100% to 80% quite rapidly especially with usage .