Related
I installed the clockworkmod touch 5.8.4.0 on my rooted and unlocked 1.85 One X, and whenever I boot into recovery it shows the loading screen then boots back into my OS. Even if I use rom manager I can't install the custom rom. Trying to install the cyanogenmod but can't do nothing. Any help? Tried posting in the other subforum they told me to come here so I'm not double posting! Tried fastboot erase cache
I don't think CWM Touch works on this phone. Try flashing the CWM that is in the Development subforum, or TWRP.
Will try, thanks!
Got the 5.8.3.1 to work, thanks again!
Your welcome. Please click the "Thanks" button whenever a post helps you.
I'm trying to install a custom rom but when I get into installing it, it says formatting cache then stays there and at the bottom says next, if I click it, it says it has been installed when really it hasn't. Trying to install the jdroid exodized. any help?
Bizarre48 said:
I'm trying to install a custom rom but when I get into installing it, it says formatting cache then stays there and at the bottom says next, if I click it, it says it has been installed when really it hasn't. Trying to install the jdroid exodized. any help?
Click to expand...
Click to collapse
Don't think that's an s4 based rom
gunnyman said:
Don't think that's an s4 based rom
Click to expand...
Click to collapse
It's not. Looks like he is trying to install everything from the tegra based One X
redpoint73 said:
Your welcome. Please click the "Thanks" button whenever a post helps you.
Click to expand...
Click to collapse
When you get enough thx do you get a cookie or something? Serious question
equlizer said:
When you get enough thx do you get a cookie or something? Serious question
Click to expand...
Click to collapse
no but it helps other users know that the person helping them just might know what they are talking about.
Bizarre48 said:
I'm trying to install a custom rom but when I get into installing it, it says formatting cache then stays there and at the bottom says next, if I click it, it says it has been installed when really it hasn't. Trying to install the jdroid exodized. any help?
Click to expand...
Click to collapse
Don't install roms from that subforum. You will brick your phone.
Yea sorry guys getting confused with what works with what. Using cleanrom now!
Bizarre48 said:
Yea sorry guys getting confused with what works with what. Using cleanrom now!
Click to expand...
Click to collapse
the best rule of thumb is if it's not in the dev section of THIS forum assume it's not safe
gunnyman said:
the best rule of thumb is if it's not in the dev section of THIS forum assume it's not safe
Click to expand...
Click to collapse
Yup. Stick to the AT&T specific Development forum. If you want an organized list, check out my index thread. I'll try not to lead you wrong.
http://forum.xda-developers.com/showthread.php?t=1671237
Hi there!
I have a Galaxy Tab 7 and I am a noob on this development stufs.
I am trying to install this version on it:
cafe-ti.blog.br/1835~samsung-galaxy-tab-7-gt-p1000-android-jelly-bean-cm10
And looks like the language is pretty simple but I have no clue how to do it...I mean, I trie using Odin..did not work...
I tried this instead:
[wiki.cyanogenmod.com/wiki/Samsung_Galaxy_Tab_(P1000L):_Full_Update_Guide
but the Recovery mode does not work!
There is any step by step non expert language tutorial to how let the Tab 7" with the CM10?
Thanks from Brazil
Rafael
You try this?
http://forum.xda-developers.com/showthread.php?t=1542897
orangekid said:
You try this?
http://forum.xda-developers.com/showthread.php?t=1542897
Click to expand...
Click to collapse
My one is the 7", not the 7'7" and its the GT-P1000L..
It will work on it?
rafapiloto195 said:
My one is the 7", not the 7'7" and its the GT-P1000L..
It will work on it?
Click to expand...
Click to collapse
I tried this video, passin to 2.3.6 first, using Odin..
youtube.com/watch?v=fXDvq5SaA70&feature=relmfu
workd well, however, after flashing, is not turning on again...
What may can be?
Oh yeah don't use the 7.7 forum then...
You Odin flashed a ROM and now the device won't even turn on? Or is it just boot loop?
orangekid said:
Oh yeah don't use the 7.7 forum then...
You Odin flashed a ROM and now the device won't even turn on? Or is it just boot loop?
Click to expand...
Click to collapse
There is no sign...does not even turn on...
black screen only..nothing...
rafapiloto195 said:
There is no sign...does not even turn on...
black screen only..nothing...
Click to expand...
Click to collapse
Can you link the ROM you Odin flashed?
Sounds like you bricked your device...
edit: if you plug it into your computer does anything pop up on the computer?
orangekid said:
Can you link the ROM you Odin flashed?
Sounds like you bricked your device...
edit: if you plug it into your computer does anything pop up on the computer?
Click to expand...
Click to collapse
I had to come to work and let it at home...
Well, as berfore flash it I let the USB on the debugging, I will track the oneclick root directly to se if at least will get a conecction with a computer;
I will try to send it to the dealer as well.
I believe as I let it on the 2.3.6, wich is the same one running on Kies, still under warranty to perform a hard brick recovery.
Let's see.
Thanks..I'll keep you guys posted.
Yeah let us know, hopefully we can do something, not sure why a GB Stock Odin flash would brick it.
orangekid said:
Yeah let us know, hopefully we can do something, not sure why a GB Stock Odin flash would brick it.
Click to expand...
Click to collapse
Just replying to your question, I flash it with the one on the youtube video link I posted:
www.youtube.com/redirect?q=https://...yuzT76vVlfj4vSE98MTM0ODM0OTI1NUAxMzQ4MjYyODU1
rafapiloto195 said:
Just replying to your question, I flash it with the one on the youtube video link I posted:
www.youtube.com/redirect?q=https://...yuzT76vVlfj4vSE98MTM0ODM0OTI1NUAxMzQ4MjYyODU1
Click to expand...
Click to collapse
Well, looks like it is working again,
however, when I try to turn on on the recovery mode to wipe data,
it shows E: MBR Checksum error
Internal MMC checksum verify failed.
Any ideas?
great idea
+1 orangekid
asdera-and said:
+1 orangekid
Click to expand...
Click to collapse
Ok! Is on the 2.3.3 now.
I want to put the Cyanogen 4.1.1 as described here:
http://forum.xda-developers.com/showthread.php?t=1871113
However, when I tried it shows me the error I mentioned above and also
Failed to verify whole-file signature...
Then , I was able to come to CMW where I should install the Cyanoi 4.1.1 however keeps showing me the error:
E: Can't moun /emmc/
Ideas?
OK
now I tried this room:
Rom: Overcome + Overcome Kernel
Following the guide step by step and then the E: looks like to be damaged. I can not even turn it on again.
Just when I put it to charge, it will show the brick scree (the fone and the computer)...
I am almost givin up...
Does your tab have an SD card in it?
If so try a different one, if not odin 100% stock, then do the root, and ROM flash again.
So basically
Unlock
Reboot
Install Goo Manger
Install Open Script
Reboot into recovery
Install ROM/Gapps
{PROFIT}!?
I'm running Official Jelly Bean, and I am rooted.
Let me know if that is the right process
Thanks!
David522d said:
So basically
Unlock
Reboot
Install Goo Manger
Install Open Script
Reboot into recovery
Install ROM/Gapps
{PROFIT}!?
I'm running Official Jelly Bean, and I am rooted.
Let me know if that is the right process
Thanks!
Click to expand...
Click to collapse
Thats right!
If you like Asus' Jelly Bean, but would like it a bit faster, I'd go with CleanRom Inheritance.
I think most of us do!
Good luck and have fun!
adelancker said:
Thats right!
If you like Asus' Jelly Bean, but would like it a bit faster, I'd go with CleanRom Inheritance.
I think most of us do!
Good luck and have fun!
Click to expand...
Click to collapse
Sweet, Have you tried others, Baked Bean / Liquid
I can't decide if i want to do this with my brand new infinity Knowing my luck as soon as i do it I'd need warranty work. I assume this fixes the pausing while browsing and stuff like keyboard lag? After you unlock it doesnt really matter what OTA updates come out does it?
can someone please explain open script? I searched the net but nothing useful came up. thanks
mrjayviper said:
can someone please explain open script? I searched the net but nothing useful came up. thanks
Click to expand...
Click to collapse
"Install open script" basically stands for "Install TWRP recovery"
Sent from my ADR6425LVW using XDA Premium.
SteveG12543 said:
"Install open script" basically stands for "Install TWRP recovery"
Sent from my ADR6425LVW using XDA Premium.
Click to expand...
Click to collapse
thanks
berfles said:
I can't decide if i want to do this with my brand new infinity Knowing my luck as soon as i do it I'd need warranty work. I assume this fixes the pausing while browsing and stuff like keyboard lag? After you unlock it doesnt really matter what OTA updates come out does it?
Click to expand...
Click to collapse
I wouldn't expect wonders but I'm using CM10 and it's definitely an improvement.
I just rooted and unlocked my tablet last night. Doing some reading atm and it looks like my next step would be to install CWM/ROM Manager and then go to town with the ROMs. My question though is what can I do without a Windows desktop/laptop? I'm currently deployed and forgot to bring my laptop charger. I had enough battery left to root my tablet and thats about it. Then I unlocked it with only the tablet. Do I need to use a computer for most ROMs? Or can I download them directly to the tablet and then install them? I've also got a Samsung Galaxy Player 5.0(stock/not rooted)...can that be used for anything that might require a desktop/laptop?
Is Goo Manager better than ROM Manager?
Do not use rom manager. You will brick your device!
lol thats good to know. Goo Manager it is then it looks like.
Coors said:
lol thats good to know. Goo Manager it is then it looks like.
Click to expand...
Click to collapse
You can use Goo but have to be rooted to do so.
Other way is fastboot. You'll need to be able to use a cmd prompt and have the adroid sdk installed.
Download the TWRP 2.3.1.0 version from the goo website (rename to twrp.blob) and use the following commands to to flash it whilst the tablet is in fastboot mode:
fastboot -i 0x0B05 flash recovery twrp.blob
fastboot -i 0x0B05 reboot
sbdags said:
You can use Goo but have to be rooted to do so.
Other way is fastboot. You'll need to be able to use a cmd prompt and have the adroid sdk installed.
Download the TWRP 2.3.1.0 version from the goo website (rename to twrp.blob) and use the following commands to to flash it whilst the tablet is in fastboot mode:
fastboot -i 0x0B05 flash recovery twrp.blob
fastboot -i 0x0B05 reboot
Click to expand...
Click to collapse
Thanks. I'll go with Goo Manager and TWRP. For my other question though is rooting one of the only things that requires to be plugged into a Windows PC? Atm I only plan to install a rom and probably the Data2SD mod when my microSD card comes in the mail. I don't have access to a PC since my laptop battery is dead and no charger.
Coors said:
Thanks. I'll go with Goo Manager and TWRP. For my other question though is rooting one of the only things that requires to be plugged into a Windows PC? Atm I only plan to install a rom and probably the Data2SD mod when my microSD card comes in the mail. I don't have access to a PC since my laptop battery is dead and no charger.
Click to expand...
Click to collapse
Rooting also works fine with a Linux PC.
_that said:
Rooting also works fine with a Linux PC.
Click to expand...
Click to collapse
I was able to root last night on my laptop. Problem is my laptop battery is now dead and my charger is 7000 miles away lol. I was just curious if there is anything else that needs to be plugged in to do. All I have right now is the TF700 and my Samsung Galaxy Player 5.0. I'm thinking one of my limitations will be formatting my microSD card if I need it to be a certain file system.
Coors said:
I was able to root last night on my laptop. Problem is my laptop battery is now dead and my charger is 7000 miles away lol. I was just curious if there is anything else that needs to be plugged in to do. All I have right now is the TF700 and my Samsung Galaxy Player 5.0. I'm thinking one of my limitations will be formatting my microSD card if I need it to be a certain file system.
Click to expand...
Click to collapse
If it's still at the pretty much factory default for most manufacturers (i.e., FAT32), you'll be fine. How are you going to get the custom ROM file on that card?
MartyHulskemper said:
If it's still at the pretty much factory default for most manufacturers (i.e., FAT32), you'll be fine. How are you going to get the custom ROM file on that card?
Click to expand...
Click to collapse
Can I not download it with the tablet and move it over?
Coors said:
Can I not download it with the tablet and move it over?
Click to expand...
Click to collapse
Yes, you should be able to as long as it is on the root of the sdcard and not in any folder.
sbdags said:
Do not use rom manager. You will brick your device!
Click to expand...
Click to collapse
Yes! Please listen to sbdags!
okantomi said:
Yes! Please listen to sbdags!
Click to expand...
Click to collapse
A couple of questions to add since I am in a similar situation with a new, locked tf700. I've read as much as I could about everything but I just want to be very certain of the order of things I have to do.
I'm on ICS (.26).
1. unlock
2. nvflash
3. update to jb (should i do .20 or .23?)
4. flash twrp
5. flash cleanrom
Is that all?
Or should I root in ICS and use OTA rootkeeper and use goomanager at JB?
Thanks for the help!
Ok im not the brightest tool in the toolbox so I could really us the help! I'm not technically minded so if you could keep it simple Id really appreciate it.
Anyway I have a Samsung Galaxy Tab 2 GT-P3110
I wanted to root it but didnt go to plan!
On the screen right now all I have is :
FIRMWARE UPGRADE ENCOUNTERED AND ISSUE. PLEASE SELECT RECOVERY MODE IN KIES & TRY AGAIN!
Iv tried using Kies but it keeps saying it doesnt support my tab!! Im here in tears cause I cant afford a new one! I was so stupid!
SOMEBODY PLEASE HELP!! :crying::crying::crying::crying::crying:
Not technically minded said:
Ok im not the brightest tool in the toolbox so I could really us the help! I'm not technically minded so if you could keep it simple Id really appreciate it.
Anyway I have a Samsung Galaxy Tab 2 GT-P3110
I wanted to root it but didnt go to plan!
On the screen right now all I have is :
FIRMWARE UPGRADE ENCOUNTERED AND ISSUE. PLEASE SELECT RECOVERY MODE IN KIES & TRY AGAIN!
Iv tried using Kies but it keeps saying it doesnt support my tab!! Im here in tears cause I cant afford a new one! I was so stupid!
SOMEBODY PLEASE HELP!! :crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
PMed
Not technically minded said:
Ok im not the brightest tool in the toolbox so I could really us the help! I'm not technically minded so if you could keep it simple Id really appreciate it.
Anyway I have a Samsung Galaxy Tab 2 GT-P3110
I wanted to root it but didnt go to plan!
On the screen right now all I have is :
FIRMWARE UPGRADE ENCOUNTERED AND ISSUE. PLEASE SELECT RECOVERY MODE IN KIES & TRY AGAIN!
Iv tried using Kies but it keeps saying it doesnt support my tab!! Im here in tears cause I cant afford a new one! I was so stupid!
SOMEBODY PLEASE HELP!! :crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
Hi There!
I've seen this before and I hope this work for you.
Try this:
1. Download a rom for your device, it has to be a stock one (you can find some here or here)
2. Uninstall Kies.
3. Install usb drivers for your device, you can download them here.
4. Run Odin as administrator.
5. Connect your tablet to your PC, Odin should show "Added"
6. Flash the stock rom you downloaded earlier.
Let it reboot and it should be ok now, if this doesn't work, I can't help you any further.
Wish you the best.
Keep it up!!!...
Stay Cool!!!...
evil_cherokee said:
Hi There!
I've seen this before and I hope this work for you.
Try this:
1. Download a rom for your device, it has to be a stock one (you can find some here or here)
2. Uninstall Kies.
3. Install usb drivers for your device, you can download them here.
4. Run Odin as administrator.
5. Connect your tablet to your PC, Odin should show "Added"
6. Flash the stock rom you downloaded earlier.
Let it reboot and it should be ok now, if this doesn't work, I can't help you any further.
Wish you the best.
Keep it up!!!...
Stay Cool!!!...
Click to expand...
Click to collapse
Hey there
Am those links you gave me dont work and u have me lost... sorry
Not technically minded said:
Hey there
Am those links you gave me dont work and u have me lost... sorry
Click to expand...
Click to collapse
I just checked the links and they DO work, just try to stay calm and read carefuly, I know it's not easy to brick our devices, but with some work and effort we can get them back to life just by simply reading and following instructions.
Keep it up!!!...
Stay Cool!!!...
evil_cherokee said:
I just checked the links and they DO work, just try to stay calm and read carefuly, I know it's not easy to brick our devices, but with some work and effort we can get them back to life just by simply reading and following instructions.
Keep it up!!!...
Stay Cool!!!...
Click to expand...
Click to collapse
Whats a rom?
Not technically minded said:
Whats a rom?
Click to expand...
Click to collapse
Oh dear lord......
Sent from my SCH-I605 using XDA Free mobile app
aarongillion63 said:
Oh dear lord......
Sent from my SCH-I605 using XDA Free mobile app
Click to expand...
Click to collapse
Oh dont laugh all my favourite pictures of shoes and naked men are on that tab! Please help i need instructions that I can actually follow! and how do i make odin administrator!! My poor tab!
Not technically minded said:
Oh dont laugh all my favourite pictures of shoes and naked men are on that tab! Please help i need instructions that I can actually follow! and how do i make odin administrator!! My poor tab!
Click to expand...
Click to collapse
All personal data will be deleted when you flash the stock firmware...
LS.xD said:
All personal data will be deleted when you flash the stock firmware...
Click to expand...
Click to collapse
ok chow do i make odin an administrator and how do i use the stock rom file ?
Not technically minded said:
ok chow do i make odin an administrator and how do i use the stock rom file ?
Click to expand...
Click to collapse
I already sent you instructions via pm. Point right mouse buttons on odin --> run as admin. Extract the .zip and put the .md5 file in "AP" in the ODIN UI and press start while phone is connected in download mode.
Have you ever herad about "google" ???
LS.xD said:
I already sent you instructions via pm. Point right mouse buttons on odin --> run as admin. Extract the .zip and put the .md5 file in "AP" in the ODIN UI and press start while phone is connected in download mode.
Have you ever herad about "google" ???
Click to expand...
Click to collapse
Ok got the odin to be administrator but there is no AP to place the file
Not technically minded said:
Ok got the odin to be administrator but there is no AP to place the file
Click to expand...
Click to collapse
Teamviewer -> makes life easier...
You have downloaded Odin 3.09 from the link in my PM ????????????????????????????????????????????????????????
This is the Universal Echoe Rom originally made for the S7flat/S7edge source thread is here ...
https://forum.xda-developers.com/tmobile-s7-edge/development/echoe-rom-g935t-beta-t3440877
have converted it to work properly on our s7actives so all buttons WORK, no boot loops at start, and no need to get scary blue warning screens, or reflashing of boot.img's
but normal risks, so do the normal routine, backup, and start with a charged battery ...
### Downgrading
1. Using modified Odin by pricecomsy
2. power down phone, and get it into download mode (so with phone switch off, hold menu+volume down and power on, then when prompted volume up)
3. Unpack G891AUCS2API2_6.0_ALL.rar
4. Load all 4 of these unpacked files in their respective placements in Odin...
5. Flash ! once Finished, you in a Clean Marshmallow
### Install is from Marshmallow/Android 6
1. So downgraded from Nougat/v7, or start afresh with Odin (i tested with PL1)
2. flash G891A_6.0_Eng_boot in odin in AP placement
3. Then root by running root.bat from MM_SuperSU-v2.76-S7QC package (it installs flashfire too)
4. then open up flash fire and add converted ECHOE_G891x_Universal_AROMA_V1.2a as zip
5. and flash, follow the aroma installer
6. once it starts installing WILL take 10-15 minutes to load ..
7. then reroot like step 3.. (need to fix the embedded rooting system to suit our actives, like on my ufirm, if i get hassled, and people like this rom will spend some more time on it! )
i doubt this is very good on battery, does have some graphical errors, but they reported in the original thread on the s7flat/edge too
will take a while to configure to how you like it, but the NoNaMe/Echoe rom configurator is very good !
All thanks go activefan01, jrkruse, and all of the echoe, and NoNaMe teams .. all i did was small conversion work, and repackage it ..
just in case i need it ....
how do i downgrade from nougat to marshmallow?
iuvius said:
how do i downgrade from nougat to marshmallow?
Click to expand...
Click to collapse
Use modified Odin by pricecomsy
and in download mode (so with phone switch off, hold menu+volume down and power on, then when prompted volume up)
Download G891AUCS2API2_6.0_ALL.rar
unpack, and flash all 4 of these files in their respective placements...
it says i need to request permission then i get an email saying delivery failed... what should i do?
Use this link
https://cloud.mail.ru/public/BGy7/gKs4xzhRE/
and find G891AUCS2API2_CL8737252_QB10881022_REV02_user_low_ship_MULTI_CERT.rar
there.....
i will eventually update the OP with my links, but run outa time/space, but thought i would get it out there, as these files been out for ages and should be easy to find!!!...
MM_SuperSU-v2.76-S7QC only installs flashfire and it does not root
NVM i got it
NVM i didnt get it
can I download REcovery for g891a ?
iuvius said:
MM_SuperSU-v2.76-S7QC only installs flashfire and it does not root
NVM i got it
NVM i didnt get it
Click to expand...
Click to collapse
did you get there in the end ??
xstt said:
can I download REcovery for g891a ?
Click to expand...
Click to collapse
No, we dont have the normal TWRP etc recovery avaliable for teh S7active/G891a as the bootloader is locked ..
so we have to use flashfire instead
miniminus said:
did you get there in the end ??
No, we dont have the normal TWRP etc recovery avaliable for teh S7active/G891a as the bootloader is locked ..
so we have to use flashfire instead
Click to expand...
Click to collapse
Tks bro
I am on QB2 rom... the 2nd stage of the root package 2.82 says "files =cannotn be found" in the dos window...
Anyone else have these issues?
i got it.. I manually ran the .BAT commands.
boot and got errors and then reboot again and again and again...
Boot loop
Everything went well except for when it first booted up i get a pop up error that said IMS service has stopped and wont stop spamming the window every time you exit and you cant even navigate the phone and after about 40 seconds of continuous error pop ups it reboots and does it again
can I flash magisk?
illtww said:
i got it.. I manually ran the .BAT commands.
Click to expand...
Click to collapse
so did you get up and running ok into echoe ??
javcarbe said:
boot and got errors and then reboot again and again and again...
Click to expand...
Click to collapse
did you start fresh on PI2 ?
AbrahamLinkedIn said:
Everything went well except for when it first booted up i get a pop up error that said IMS service has stopped and wont stop spamming the window every time you exit and you cant even navigate the phone and after about 40 seconds of continuous error pop ups it reboots and does it again
Click to expand...
Click to collapse
did you start fresh on PI2 ?
alukarulz said:
can I flash magisk?
Click to expand...
Click to collapse
no, not that im aware of at present....
miniminus said:
so did you get up and running ok into echoe ??
Click to expand...
Click to collapse
Yes i did..
But the battry life/performance was just no there...
Had to goto QF2 for better battery life/performance.
illtww said:
Yes i did..
But the battry life/performance was just no there...
Had to goto QF2 for better battery life/performance.
Click to expand...
Click to collapse
Yeah as its based on marshmallow, and its very busy ROM....
There is a v1.5 aviable to convert over, but I doubt that will make any significant difference ..
Done it more of Proof of concept that s7 Roms can be ported to the active
If there is a decent nougat s7 Rom, i could try porting that ... is stang? a good one ?
Im prolly gunna sound retarted asking this. But I just rooted and am running your ufirm_hybrid. What's the difference in this one. Can I start this threat from where im at rit now and try it or is this something totally different. Again sorry, still new just trying stuff out
Sent from my Samsung SAMSUNG-SM-G891A using XDA Labs
This is something different. It is a port of Echo rom for the S7 Active.
Great bit of work but 6.0 is too old now.