Database Info

signature varification failed while flashing odex JB sense 4+ ROM on my HTC explorer

I have tried flashing my phone with Odex JB Sense 4+ ROM but I have got an error called "Signature Varification Failed"!
What Shoud i do ??

You need a custom recovery.
CWM will do. But because CWM is not available to the HTC Explorer, Ill show you CWM. Just download the file, install the downloaded zip file in recovery, and it will boot you to another recovery. In that recovery (CWM recovery) Signature Verification is automatically disabled. So you can choose anything you want to flash (Only if the file has no error).
In link choose HTC PICO:
Link: http://clockworkmod.com/rommanager
Be sure to click that THANK button!

Flashing kernel

can i flash custom kernel??? if yes , how to flash thunderzap kernel???

Firstly you have to have unlocked bootloader via flashtool (here's how to do it)
http://www.modaco.com/topic/364335-...sh-tool-unlockingrelockingflashing-stock-rom/
Then download Thunderzap zip file so put it into internal storage. From that zip extract .img file which you need (kk - kitkat, jb - jelly bean) and type of recovery - TWRP or CWM. That file flash via fastboot mode in flashtool. Then boot into recovery and install that zip which you have in internal storage.. follow instalation progress instructions. That's all.
If youre complete beginner and absolutely don't know what to do do not flash custom kernel you can damage your phone.

Kosa02 said:
Firstly you have to have unlocked bootloader via flashtool (here's how to do it)
http://www.modaco.com/topic/364335-...sh-tool-unlockingrelockingflashing-stock-rom/
Then download Thunderzap zip file so put it into internal storage. From that zip extract .img file which you need (kk - kitkat, jb - jelly bean) and type of recovery - TWRP or CWM. That file flash via fastboot mode in flashtool. Then boot into recovery and install that zip which you have in internal storage.. follow instalation progress instructions. That's all.
If youre complete beginner and absolutely don't know what to do do not flash custom kernel you can damage your phone.
Click to expand...
Click to collapse
can u give me extracted .img for jb????

Here is it

Kosa02 said:
Here is it
Click to expand...
Click to collapse
thanks, can u give me thunderzap kernel???

RootLord said:
thanks, can u give me thunderzap kernel???
Click to expand...
Click to collapse
It's included in the post above, flash it via flashtool & install the zip file in recovery.

Joery360 said:
It's included in the post above, flash it via flashtool & install the zip file in recovery.
Click to expand...
Click to collapse
zip file is included in it.I should extract it???

First copy that zip file copy to internal storage in phone. Then flash the kernel as @Joery360 said. Then boot into CWM and install that zip. You have to install it because of wifi modules. Without this install you wouldn't have working wifi.

Joery360 said:
It's included in the post above, flash it via flashtool & install the zip file in recovery.
Click to expand...
Click to collapse
Kosa02 said:
First copy that zip file copy to internal storage in phone. Then flash the kernel as @Joery360 said. Then boot into CWM and install that zip. You have to install it because of wifi modules. Without this install you wouldn't have working wifi.
Click to expand...
Click to collapse
In brief??? its a img file??
But u didn't give me zip file??? I don't know much about it so asking plz help
Sent from my C2104 using xda app-developers app

Here is link to zip file. http://forum.xda-developers.com/devdb/project/dl/?id=4856 download it and the rest is above.

I'm just browsing thru here trying to become more educated in all this.
I'm just saying, none of the explanations make sense in this post.
Really?
Flash this, install that, extract, etc etc.
Please rephrase.
Sent from my GT-N7105 using xda app-developers app

[TWRP 2.7.00 ][GT-S7500] Recommended recovery for CM11 and Speedmod

For newbies who come across status 6 , 7 error while installing Speedmod or CM11 Rom or Inspiration ROM.
Please find the TWRP touch recovery 2. 7. 0. 0
HOW TO INSTALL.
Using CWM
1Downld twrp 2.7.00****.zip file
2Copy zip to sd card
3 Go to cwm recovery
4 choose and Install zip
5 select Reboot to recovery n done.
http://forum.xda-developers.com/attachment.php?attachmentid=3246231&d=1428229542
OR
Using ODIN(read carefully)
1 Downld the recover.tar.zip
2 then Extract the zip file using winzip or winrar.
3 u will get "recovery.tar"
4 flash this tar file using odin on ur pc.
http://forum.xda-developers.com/attachment.php?attachmentid=3315198&d=1431752787
NOTE :
ALWAYS TAKE CURRENT BACKUP BEFORE INSTALLING NEW ROM.
ALWAYS DO FULL WIPE (DATA. CACHE, DALVIK) BEFORE YOU INSTALL ROM.

@naik2902 which one among the 2 zip files should I install ??

techsammy said:
@naik2902 which one among the 2 zip files should I install ??
Click to expand...
Click to collapse
1 st one . u can flash it using ur cwm recovery.

Thanks again you're a lifesaver

After FLASHING Given a white screen

After FLASHING Given a white screen ​

try to boot in download mode and flash twrp 2.5.0.0 https://www.dropbox.com/s/w3i0u88ut26d2op/twrp-build-3-06052013-trebon.zip

does I it support for flashing any ROM???

[CWM]Replace KingUser with SuperSu, Install CWM on KingRoot rooted Device

How-To: Installing CWM on Phone, rooted with KingRoot
If you want to get CWM on a Phone, rooted with KingRoot, for example to get rid of KingUser with SuperSu and it doesn't work for you to only flash CWM with Odin and later SuperSu.zip with CWM, try this:
What you need:
-Your Phone
-PC running Linux with ADB installed
-CWM for your Phone
-Supersu.zip
Downloads: SuperSu.zip • http://download.chainfire.eu/supersu
ATTENTION: WITH FLASHING CWM YOUR WARRANTY IS NOW LOST !I'M NOT RESPONSIBLE FOR BRICKED PHONES! YOU DO THIS ALL ON YOUR OWN RESPONSIBILITY!
Tested System: Galaxy Ace 3, running Android 4.2.2 Stock Rom
Let's go:
1. Backup all your data !
2. Start your Phone and enable USB-Debugging in the Developer-Options
3. Connect your Phone to the PC
4. Download the needed Files
5. Copy the Supersu.zip on your SdCard and Copy CWM in the Binary where you've installed ADB
6. Open an ADB-Shell-Terminal (type: "adb shell")and Tip following Code:
su
Click to expand...
Click to collapse
and Accept the USB-Debugging-Dialogue
7.
lsattr install-recovery.sh
Click to expand...
Click to collapse
8.
cp/install/etc/install-recovery.sh/system/etc/install-recovery.sh.STOCK
Click to expand...
Click to collapse
9.
chattr -ia/system/etc/install-recovery.sh
Click to expand...
Click to collapse
10.
rm /system/etc/install-recovery.sh
Click to expand...
Click to collapse
11. Now Shut-Down your Phone and enter into Download-Mode
12. Now open Odin (or Jodin...) and flash the Recovery-File (Now Warranty is Void)
13. Now Resart your Phone and boot into CWM-Recovery and Flash SuperSu.zip from SD-Card
Don't forget to hit the Thanks-Button !
Sunbucks

[Q] Systemless SuperSU failed everytime (Binaries need to be updated)

Hello,
I have a problem and I will try to explain that precisely.
(I'm on Galaxy S6 G920F Stock Firmware)
I have tried to flash SuperSU in Systemless mode and I have followed this tutorial : http://forum.xda-developers.com/showpost.php?p=69412347&postcount=1215&branch_used=true
1st try :
Wiped all partitions and Flash Stock Firmware
Flash TWRP
SN Green response
Push Ramdisk and .supersu patch with ADB
In TWRP : Terminal : echo "SYSTEMLESS=true" > /data/.supersu
Flashed SuperSU SR2
Succeed with no error
And then... "Binaries need to be updated" in SuperSU app (even with reboot) and Root not working.
Then, I have tried with SR1 and SR3, not working too.
2nd try :
I have re-flashed the stock firmware (and wipe all partitions)
And tried again the same steps BUT NOW with Arter Kernel.
Not working too with SR1, SR2 and SR3.
I have missed something?
Thanks in advance!

Did you wipe data after install the SuperSU zip?

forumber2 said:
Did you wipe data after install the SuperSU zip?
Click to expand...
Click to collapse
I have a fresh install of the firmware, before installing the rom I have wipe data / system and all other
So no data left from my other rom

LucaXperia said:
I have a fresh install of the firmware, before installing the rom I have wipe data / system and all other
So no data left from my other rom
Click to expand...
Click to collapse
I mean did you wipe after install SuperSU zip, not before

forumber2 said:
I mean did you wipe after install SuperSU zip, not before
Click to expand...
Click to collapse
I have to wipe all my personal data after flashing SuperSU ?

LucaXperia said:
I have to wipe all my personal data after flashing SuperSU ?
Click to expand...
Click to collapse
You have to NOT wipe data after flashing SuperSU

forumber2 said:
You have to NOT wipe data after flashing SuperSU
Click to expand...
Click to collapse
Yeah, look at the first post, I updated it

I've had this same problem too. Here's what I did to resolve the problem
Code:
1. Clear all PHH SuperUser app data
2. Uninstall PHH SuperUser
3. Flash the latest version (r266 ATM)[URL="http://forum.xda-developers.com/apps/magisk/magisk-phh-s-superuser-android-pay-t3435921"]HERE[/URL] phh super user binaries
4. Reboot and re-install PHH Superuser from market
5. Haven't had the issue since.
One thing I did notice was as long as you didn't need to request /new/ admin rights, things would still work. It was when you needed to grant a new app root access.

nolimit78 said:
I've had this same problem too. Here's what I did to resolve the problem
Code:
1. Clear all PHH SuperUser app data
2. Uninstall PHH SuperUser
3. Flash the latest version (r266 ATM)[URL="http://forum.xda-developers.com/apps/magisk/magisk-phh-s-superuser-android-pay-t3435921"]HERE[/URL] phh super user binaries
4. Reboot and re-install PHH Superuser from market
5. Haven't had the issue since.
One thing I did notice was as long as you didn't need to request /new/ admin rights, things would still work. It was when you needed to grant a new app root access.
Click to expand...
Click to collapse
I would like to use SuperSU
And PHH seems to be not Systemless

LucaXperia said:
I would like to use SuperSU
And PHH seems to be not Systemless
Click to expand...
Click to collapse
PHH was specifically created to handle systemless.