Database Info

I wanna remove the clear lockscreen and put the original one??

I am on fresh 1.1 but i dont like the clear lockscreen. Is there a way i can change it??

yes try looking

just push this to system/app
you can use the fresh kitchen or adb
btw you can take apps out of any rom.zip on your computer, that's where i got this

Thank You thedudejdog it worked perferct

You can take the HtcLockscreen.apk out of the /system/app dir of any ROM you like to get that rom's lockscreen going.

thedudejdog said:
just push this to system/app
you can use the fresh kitchen or adb
btw you can take apps out of any rom.zip on your computer, that's where i got this
Click to expand...
Click to collapse
am a newly rooted hero owner. read/re-read/followed the steps to do it on this forum and am grateful to those who lent their knowledge/expertise.
want to have the original hero lockscreen and downloaded this HtcLockScreen.apk file.
i searched online to see if i could find instructions to push this but can't seem to figure it out.
i've done the following:
- copied HtcLockScreen.apk to the root of my sd card.
- opened a command prompt
- got to "C:\android-sdk-windows\tools>"
from here am i supposed to type:
- "adb shell"
- "su"
'cause i think to push this is the command, right:
- "push /sdcard/HtcLockScreen.apk /system/app/"?
help please!
thank you.

ok, put the file that you want to push in your tools directory of the sdk (c:\sdk\tools) these are the commands to push the file using adb
make sure you are in the command prompt and in your android sdk/tools directory.
you can copy/paste these one line at a time
i always do a
Code:
adb devices
first just to make sure adb sees your phone. if your phone shows up then continue
then mount system read/write
Code:
adb remount
then push the new lockscreen (this will overwrite the one that is there now)
Code:
adb push HtcLockScreen.apk /system/app
then close the cmd prompt window
Code:
exit
or you can use the fresh kitchen for a nice gui that does all the dirty work for you.
then reboot and there ya go, new lockscreen (or whatever)
i've never used the shell to push files, but i assume those commands that you listed should work for that, but you have to remount the filesystem first.

I thought I saw on here a little while back that showed you how to remove just the image from the lockscreen so all you have is the grey bar. Does anyone know where that is because I thought that that was kinda cool.

thedudejdog said:
ok, put the file that you want to push in your tools directory of the sdk (c:\sdk\tools) these are the commands to push the file using adb
make sure you are in the command prompt and in your android sdk/tools directory.
you can copy/paste these one line at a time
i always do a
Code:
adb devices
first just to make sure adb sees your phone. if your phone shows up then continue
then mount system read/write
Code:
adb remount
then push the new lockscreen (this will overwrite the one that is there now)
Code:
adb push HtcLockScreen.apk /system/app
then close the cmd prompt window
Code:
exit
or you can use the fresh kitchen for a nice gui that does all the dirty work for you.
then reboot and there ya go, new lockscreen (or whatever)
i've never used the shell to push files, but i assume those commands that you listed should work for that, but you have to remount the filesystem first.
Click to expand...
Click to collapse
thank you! it worked...

how to use themes from theme repo

sorry guys forgive my dumpness but i downloaded theme from the topic . after i replaced the apk files through root explorer and made restart to the device after that my x10 couldnt start i reflashed root steps but i really still want to change this stupid blue colore is there any easy way to do it . i wanna use the themes that already made from devlopers it comes like normal apk files........thanks in advance
Sent from my X10i using the XDA mobile application powered by Tapatalk

see Here *10chars*

What files do you have exactly? framework-res.apk? Phonebook.apk? Phone.apk
This thread as given above is taken that you have ADB installed on your computer.
http://forum.xda-developers.com/showthread.php?t=714288
If you do not have ADB, visit this thread first.
http://forum.xda-developers.com/showthread.php?t=532719
Feel free to ask if you have more questions

xGary said:
What files do you have exactly? framework-res.apk? Phonebook.apk? Phone.apk
This thread as given above is taken that you have ADB installed on your computer.
http://forum.xda-developers.com/showthread.php?t=714288
If you do not have ADB, visit this thread first.
http://forum.xda-developers.com/showthread.php?t=532719
Feel free to ask if you have more questions
Click to expand...
Click to collapse
i have framework-res.apk? Phonebook.apk? Phone.apk
and i know about adb commands but i wonder what is the diffrences it's all about replacing apk files and i manged that with root explorer and the guide is too hard it's all about modfications of the system files but it didn't tell us how to use an exsiting theme files ....is it all about the remount command that make us have to use adb ??? thanks in advance

h.boushi1987 said:
i have framework-res.apk? Phonebook.apk? Phone.apk
and i know about adb commands but i wonder what is the diffrences it's all about replacing apk files and i manged that with root explorer and the guide is too hard it's all about modfications of the system files but it didn't tell us how to use an exsiting theme files ....is it all about the remount command that make us have to use adb ??? thanks in advance
Click to expand...
Click to collapse
Not sure if ADB is required but thats the only method I know of. A step by step guide (Might want to double check with advanced users)
1) Install ADB and set the environment variables, etc.
2) Go to the folder (Should be c:/android-sdk-windows/tools) and open adb.exe (If it flashes and auto closes, open up cmd [Start>Run>cmd] and drag the adb.exe into the cmd and press enter)
3) Put Phone In Debugging Mode Settings>Applications>Development>USB Debugging
In ADB, type these commands
*Note that the commands are case sensitive*
Pull the files you are about to replace with the following commands:
cd c:/anrdroid-sdk-windows/tools
adb pull /system/framework/framework-res.apk framework-resk.apk
adb pull /system/app/Phonebook.apk
adb pull /system/app/Phone.apk
4) Now framework-res.apk, Phonebook.apk, and Phone.apk should be in your tools folder where your adb.exe is. Put these files somewhere safe.
5) Now drag your new framework-res.apk, Phonebook.apk, and Phone.apk into the tools folder.
6) Go back to adb and type the following command:
adb shell mount -o remount,rw -t yaffs2 /dev/block/mtdblock2 /system
7) Now these commands will move your new theme files to the sdcard:
adb push framework-res.apk /sdcard/framework-res.apk
adb push Phonebook.apk /sdcard/Phonebook.apk
adb push Phone.apk /sdcard/Phone.apk
8) Now these commands will install the new theme files in the sd card from the previous step:
adb shell dd if=/sdcard/framework-res.apk of=/system/framework/framework-res.apk
adb shell dd if=/sdcard/Phonebook.apk of=/system/app/Phonebook.apk
adb shell dd if=/sdcard/Phone.apk of=/system/app/Phone.apk
9) Now your phone will restart (If not, manually restart) and your theme should be installed.
Gary~

thanks a lot man ... you are the best i'll try that and report back but any way you still the best.....
Sent from my X10i using the XDA mobile application powered by Tapatalk

why every time i put the mount command it tells me "the device not found"
and the pull commands don't seems to work
i tried adb devices command but it seems it doesnt found my device

Mmm...maybe its sound dumb, but I'm a noob in this. How do you change the battery icon? Thx

rein_hiryu said:
Mmm...maybe its sound dumb, but I'm a noob in this. How do you change the battery icon? Thx
Click to expand...
Click to collapse
You pull the framework-res.apk file and open it with 7-zip. Inside should be some folders and there should be a folder (forgot which one) with a bunch of pngs. Replace the battery icons with desired ones.
Gary~

How to root the Droid 2

All credit for the binary goes to Sebastian Krahmer at http://c-skills.blogspot.com/. Please see fit to donate via Paypal to [email protected]
If you want a simpler 'one-click' process, go to this thread: Easier 1-2-3 Droid 2 Root for Windows / Linux / Mac
***NOTE: Proceed at your own risk. I and the providers of this code are not responsible for anything you do to your phone!***
Setup:
- Install adb (here) and Motorola drivers for windows(32-bit or 64-bit)
- Download attached archive
- Extract to a directory, I used c:\Droid2Root
- Make sure you have USB degugging enabled
- Change connection to PC Mode
Process:
- Open command prompt
- cd c:/wherever-your-sdk-tools-folder-is
- adb devices (to verify the connection)
- cd c:/Droid2Root
- adb push Superuser.apk /sdcard/Superuser.apk
- adb push su /sdcard/su
- adb push busybox /sdcard/busybox
- adb push rageagainstthecage-arm5.bin /data/local/tmp/rageagainstthecage-arm5.bin
- adb shell
- cd data/local/tmp
- chmod 0755 rageagainstthecage-arm5.bin
- ./rageagainstthecage-arm5.bin
- let the process run until it 'kicks' you out (may take a minute or two) to c:/Droid2Root
- cd c:/wherever-your-sdk-tools-folder-is
- adb kill-server
- adb devices (to verify the connection)
- adb shell (you should now have a # prompt, if not return to ./rage step above)
- mount -o rw,remount -t ext3 /dev/block/mmcblk1p21 /system
- cp /sdcard/Superuser.apk /system/app/Superuser.apk
- cp /sdcard/su /system/bin/su
- cp /sdcard/busybox /system/bin/busybox
- chmod 4755 /system/bin/su
- chmod 4755 /system/bin/busybox
- mount -o ro,remount -t ext3 /dev/block/mmcblk1p21 /system
- exit
- exit
I'm sure there are certain steps that could be streamlined or eliminated, so please feel free to make a suggestion and I'll edit the post.
Additional thanks to @rainabba and AllDroid.org for their excellent Droid X rooting tutorial, which assisted me greatly in this process.

waiting for a recovery, glad to see its rooted

Android n00b here, I can remove the Verizon crapware with this right? And tether?

thelolotov said:
Android n00b here, I can remove the Verizon crapware with this right? And tether?
Click to expand...
Click to collapse
yes and yes

thelolotov said:
Android n00b here, I can remove the Verizon crapware with this right? And tether?
Click to expand...
Click to collapse
I wouldn't remove anything yet since we don't have a sbf file to recover from partial bricks. However, tethering and any other apps that require root can be used now.

I'm new to doing this all the adb way.
When you say extract to a directory what do you mean to extract. After it downloads the achive files its done.....
i understand the rest of the commands but im lost there

Hmm, alright, that's still worth it, will I lose my data/have to hard reset to root?

Right click the downloaded archive and "extract files". You need to do this so adb can push them to the phone.

thelolotov said:
Hmm, alright, that's still worth it, will I lose my data/have to hard reset to root?
Click to expand...
Click to collapse
Nope, it just gives you access. Nothing deleted.

I'm retarded i didnt realize it was attached to the post, i thought it was what adb downloaded when i first opened it cause it called them archives.

cannot access
I got as far as pushing super user su and busy box onto my phone but it says that system in read only.. how do i fix this?

Anybody actually try this?

Hello,
I am following your directions and when I get to the "adb push Superuser.apk" step I receive the following error:
"failed to copy 'Superuser.apk' to '/system/app/Superuser.apk': Read-only file system"
I get this same error for the other adb push steps that follow.
Edit: To verify, I get a # shell.
Edit 2: I tried pushing the Superuser.apk to /data/local/tmp then cp to /system/app/, this also popped up a read-only file system error.

I'm currently trying it.
I have a 64 bit driver on my computer that i used to use for my D1 but it doesn't recognize my D2 when doing adb devices and i cant install the 32 bit driver

GSletta said:
I got as far as pushing super user su and busy box onto my phone but it says that system in read only.. how do i fix this?
Click to expand...
Click to collapse
Did you verify you have the # prompt three steps before that?

Yeah i get the # but it wont let me push superuser su and busybox

GSletta said:
Yeah i get the # but it wont let me push superuser su and busybox
Click to expand...
Click to collapse
Weird.. I didn't need to mount the system manually, but let me if there's a step I left out.

and some more screens (feel free to use in first post):
http://i.imgur.com/nPllt.jpg
http://i.imgur.com/COTEA.jpg
http://i.imgur.com/open3.jpg

djh816 said:
and some more screens (feel free to use in first post):
http://i.imgur.com/nPllt.jpg
http://i.imgur.com/COTEA.jpg
http://i.imgur.com/open3.jpg
Click to expand...
Click to collapse
Did you add any steps to mount the system? I don't believe I did, but it seems others are finding it to be read-only.

jerseyh22accord said:
I'm currently trying it.
I have a 64 bit driver on my computer that i used to use for my D1 but it doesn't recognize my D2 when doing adb devices and i cant install the 32 bit driver
Click to expand...
Click to collapse
Don't know if it will help you, but if it's anything like the DInc, you could just use the SDK's drivers and add a few device identifier lines to the INF file before installing them.

[GUIDE][ADB]Basic Linux/Unix Commands

Basic Linux/Unix Commands
[HIGHLIGHT] DISCLAIMER - You know the drill. I don't deem myself responsible in case you screw up your phone. Always make a backup if you don't trust yourself and if you know that you screwing up is your forte[/HIGHLIGHT]
Thanks -
mihir287 for his FAQ
sweetnsour for his extensively detailed thread
Shen - advice
Zayed from www.addictivetips.com
http://www.linuxtopia.org
This guide aims to give you a background on some of the linux commands available to you once you obtain an adb shell.
In order to obtain an ADB shell, you must have adb set up on your computer (all ADB really consists of in windows is adb + 2 dlls + adb drivers.
However it makes sense to fully set up the Android SDK if you plan on developing for Android.
You need to install adb or get Terminal Emulator. To install adb and get more info about it visit here.
NOTE = All commands in linux/unix are CASE SENSITIVE.
Shell Commands
These commands are to be typed after typing
Code:
adb shell
In the Command Prompt.
Or, you can proceed normally if you are using a Terminal Emulator.
1. cd - Change Directory
To change to any directory, simply type:
Code:
cd <dirname>
dir name is the path. For instance, to switch to system/etc, type:
Code:
cd /system/etc
'..' will allow you to go back one directory. In our example, typing:
Code:
cd ..
would take you back to /system
2. ls - List Files
To list all the files in whatever directory you're in, simply type:
Code:
ls
pressing enter after, of course. This will list all NON-HIDDEN files/directories.
Code:
ls /system/etc
will list the contents of system/etc
Code:
ls -l
will list all NON-HIDDEN files in your current directory with additional details
Code:
ls -a
will list all files/directories(including hidden) within your current directory
Code:
ls *.extension
will list all the files wit the specified extension in the directory
For example i wanna list all apps -
Code:
cd /system/app
ls *.apk
3. su - SuperUser
The standard adb shell (unless you're on an insecure kernel/ramdisk), will be a non-root shell ($)
To obtain root priviliges (if your phone is rooted), simply type:
Code:
su
on obtaining superuser priviliges, you will be presented with a # symbol, which represent a root shell.
4. chmod - Change Mode
The two most commonly used 'modes' you'll come across in Android are '777' and '755'
These numerical pemissions have different meanings, of course. This can be a little confusing, so I hope this explains it in a simple to understand way.
As you can see, there are three numbers in the following example; 'chmod 755'
So, to break that down: The first number in the sequence, '7', represents the USER (aka, you). The second number in the sequence, '5', represents the GROUP (users who are members of the file's group) and the third number, '5' represents OTHERS (aka, everyone else).
Now to explain why they are 755, and the significance of those numbers, see the following list:
7 Full
6 Read/Write
5 Read/Execute
4 Read Only
3 Write/Execute
2 Write Only
1 Execute
0 None
So in the instance of 777, you can see that USER, GROUP and OTHERS have FULL access to the file in question.
To change the permissions of one file (apns-conf.xml for example, type:
Code:
chmod 777 /system/etc/apns-conf.xml
To change the permissions of all files in a directory, use the -R (recursive)option:
Code:
chmod 777 -R /system/etc
5. pwd - Print Working Directory
Couldn't be more simple. if you want to find out which dirctory you're currently in, type:
Code:
pwd
and press enter.
6. cat - Concatenate (evolved from)
The cat command if used to list a file's contents on your screen; or pass via pipeline to use with other Linux commands.
cat /proc/mounts
will output the various mount points in your android OS.
Note that there are many other uses for the cat command.
7. mount - remount as r/w or r/o
The mount command is used to mount a directory as r/w[Read-Write which allows you to modify it] or r/o[Read-Only]
Mount info -
Code:
mount
To mount as r/w and r/o respectively use -
Code:
mount -o remount rw <dirname>
or
mount -o remount ro <dirname>
To mount /system i will use
Code:
mount -o remount rw /system
or
mount -o remount ro /system
8. cp, mv, rm - Copy, Move, Remove
Use the 'cp' and 'mv' commands to copy, move a file/directory respectively and 'rm' to remove one. They are equivalent to copy+paste and cut+paste and delete
If you are planning to copy/move/remove from your android to anywhere else or viceversa you need to mount as r/w prior to this and mount as r/o after it.
They can be used as
Code:
cp <source> <destination>
or
mv <source> <destination>
or
rm <source>
For example i wanna copy/move/delete my zip file to system/media [after mounting system]
Code:
cp /sdcard/bootanimation.zip system/media
or
mv /sdcard/bootanimation.zip system/media
or
rm /sdcard/bootanimation.zip
9. Auto - Install Applications To SDCard
Type the following -
Code:
pm setInstallLocation 2
10. logcat
A logcat is basically a command to view messages in one of the system logs.
Logcat is the command to view the internal log of the Android system.
Viewing logcat is often the best way - and sometimes the only way - to diagnose a problem.
Dev's always need proper and useful feedback. So if you are testing something, you can always obtain the errors an report back to the dev who in turn can solve your problem efficiently.
Code:
su
logcat > /sdcard/log.txt
Will obtain the logcat to your sdcard as log.txt
Googlers have a sense of humour so even 'lolcat' works identically as 'logcat'
Code:
lolcat
Some dev's require extensive logcat info. To know more about it continue reading here.

ADB Commands
The following commands are to be type in your adb folder directory.
For instance, mine is in C:\android-sdk-windows\platform-tools so i will type
Code:
cd C:\android-sdk-windows\platform-tools
and then proceed with the following code lines
Alternatively you can change your PATH variable
Setting Path on Windows
For Windows XP:
Start -> Control Panel -> System -> Advanced
Click on Environment Variables, under System Variables, find PATH, and click on it.
In the Edit windows, modify PATH by adding the location of the class to the value for PATH. If you do not have the item PATH, you may select to add a new variable and add PATH as the name and the location of the class as the value.
Close the window.
For Windows Vista/Windows 7:
Right click “My Computer” icon
Choose “Properties” from context menu
Click “Advanced” tab (“Advanced system settings” link in Vista)
In the Edit windows, modify PATH by adding the location of the class to the value for PATH. If you do not have the item PATH, you may select to add a new variable and add PATH as the name and the location of the class as the value.
Click to expand...
Click to collapse
1. Check Connected Phone
To display list of available devices, type
Code:
adb devices
You will get the following output
Code:
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached 21342737ft6273
where the number indicates your devices serial number usually the one one the back of your phone[needs citation]
2. Login To Android Shell
Code:
adb shell
After pressing enter you will either see '$' or '#'
If you get ‘#’ after typing adb shell, you have already get root access on the phone, no need to type su. Otherwise if you get ‘$’ , type ’su’ to get root access (only for rooted device).
3. Install Application
This command installs the app whose directory is specified by you.
Code:
adb install appname.apk
Note that the name of the application should be without any blank spaces in between. Say i have an app called pes 12.apk, I rename it to pes_12.apk - Also don't miss out the .apk extension
example
Code:
adb install C:\programfiles\pes_12.apk
4. Files From Phone To PC And Vice Versa
For Phone - PC
Code:
adb pull <source> <destination>
For PC-Phone
Code:
adb push <source> <destination>
Example
Code:
adb pull /sdcard/bootanimation.zip C:\programfiles
Code:
adb push C:\programfiles\bootanimation.zip /sdcard
^Self Explanatory
5. Reboot To (Normal/Recovery/Bootloader)
Type the following to reboot normally or to recovery/bootloader respectively
Code:
adb reboot
Code:
adb reboot recovery
Code:
adb reboot bootloader
Some Useful Codes-
I do not know many. If you have any suggestions please do tell me
Type them in line by line and don't type in the '$' and '#'
1. Rooting
Code:
adb devices
adb shell
$ echo 1 > /data/local/lge_adb.conf
Then you can proceed onto using SuperOneClick
2. Installing Custom Recovery
The recovery.img and flash_image files must be in /sdcard
Code:
adb shell
$ su
# mount -o remount rw /system
# cat /sdcard/flash_image > /system/xbin/flash_image
# chmod 755 /system/xbin/flash_image
# flash_image recovery /sdcard/recovery.img
# mount -o remount ro /system
# exit
$ exit
adb reboot recovery

Will add FAQ later if needed

Ohh ! so much detail !
As far as i can see its very well written.
Will read tomorrow

Awesome guide! Thank you!
Sent from my LG-P500 using xda premium

MaKTaiL said:
Awesome guide! Thank you!
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
Glad You Like It

Rutuj said:
Glad You Like It
Click to expand...
Click to collapse
I knew Half of this but the way you put it is basically noob written and easy to follow through. Thumbs up for this guide. I wish someone posted this when I first started playing with android. This would've made life easier for me >.<
Sent from my LG-P500 using XDA App

purple1 said:
I knew Half of this but the way you put it is basically noob written and easy to follow through. Thumbs up for this guide. I wish someone posted this when I first started playing with android. This would've made life easier for me >.<
Sent from my LG-P500 using XDA App
Click to expand...
Click to collapse
This doesnt make life easier, if one command wrong, bam! A fresh brick phone...
Sent from my Nexus One using Tapatalk

and how to uninstall app from adb ?
nice guide btw

Great guide. I would suggest you add details on how to get logcat as well, since many developers will find it useful if users post logs of bugs
Code:
su
logcat > /sdcard/log.txt

mihir287 said:
Great guide. I would suggest you add details on how to get logcat as well, since many developers will find it useful if users post logs of bugs
Code:
su
logcat > /sdcard/log.txt
Click to expand...
Click to collapse
Thanks !
Added !

Bump !

Thanks commands working perfect.
Tell me onething..how did you get time to type all of this?

royalflusher9 said:
Thanks commands working perfect.
Tell me onething..how did you get time to type all of this?
Click to expand...
Click to collapse
Compiling info takes time.
Type time = 30 mins

Nice thread for n00bs like me !!!! Thanks very much!!!1

Bumping this thread

very helpful guide ......
thanxxxx

[GUIDE] Asus fonepad 7 k012 - extSDCard write fix & hosts tweak - NO rooting

I wanna post this guide cuz i searched around and couldnt find any method for kitkat and lollipop, get full sd card write WITHOUT permanent ROOTING.
Some may say: just root, make changes with root file manager, and unroot from superSU. BUT, for this device, from what i experienced, the option for full uninstall/complete unroot, in superSU app, will just hang and do nothing .
I use IntelAndroid-FBRL 05-16-2015 Public Trail Release, made by @social-design-concepts - a really big thanks :good:.
http://forum.xda-developers.com/showpost.php?p=60770086&postcount=352
The tweaks may work on other intel based devices, when temporary CWM recovery is triggered.
Reboot tablet in fastboot/droidboot mode - vol+ and power until asus logo apears.
Install intel android drivers - there are over 8mb limit of .7z files, so i cant add them here, just search intelandroiddrvsetup1.1.5.zip.
Connect tablet to pc with usb cable.
Unzip IntelAndroid-FBRL-05-16-2015-PTR.7z from @social-design-concepts and enter launcher.bat
type ACCEPT after reading the warning
Now:
- chose T2 if u are using Kitkat
- chose T4 if u are using Lollipop
Tablet reboots and after some screen artefacts (is normal) you are in temporary CWM recovery, which has a temporary root adb shell.
Keep tablet connected to pc.
Now download ADBfolder.7z, decompress it, and open inside a command prompt/window.
In this window insert commands, each followed by enter:
adb devices
adb shell id
adb shell mount /system
adb shell mv /system/etc/hosts /system/etc/hosts.bak
adb push hosts /system/etc/hosts
adb shell chmod 0644 /system/etc/hosts
adb shell mv /system/etc/permissions/platform.xml /system/etc/permissions/platform.xml.bak
adb push platform.xml /system/etc/permissions/platform.xml
adb shell chmod 0644 /system/etc/permissions/platform.xml
adb shell reboot
The tweaks remain even after factory reset.
For removing the tweaks, in case of installing oficial updates through OTA or manual, trigger again temporary CWM recovery, enter ADB folder, open command window and use these commands, each followed by enter:
adb devices
adb shell id
adb shell mount /system
adb shell rm /system/etc/hosts
adb shell mv /system/etc/hosts.bak /system/etc/hosts
adb shell rm /system/etc/permissions/platform.xml
adb shell mv /system/etc/permissions/platform.xml.bak /system/etc/permissions/platform.xml
adb shell reboot
It can be done, for lazy ones , with pasting these commands in two .bat files (one for install, other for remove), but I wanted ppl to see what is actually happening.
You can use another hosts file, but keep in mind the /system has limited space, so large ones may not fit.

b0by said:
I wanna post this guide cuz i searched around and couldnt find any method for kitkat and lollipop, get full sd card write WITHOUT permanent ROOTING.
Some may say: just root, make changes with root file manager, and unroot from superSU. BUT, for this device, from what i experienced, the option for full uninstall/complete unroot, in superSU app, will just hang and do nothing .
I use IntelAndroid-FBRL 05-16-2015 Public Trail Release, made by @social-design-concepts - a really big thanks :good:.
http://forum.xda-developers.com/showpost.php?p=60770086&postcount=352
The tweaks may work on other intel based devices, when temporary CWM recovery is triggered.
Reboot tablet in fastboot/droidboot mode - vol+ and power until asus logo apears.
Install intel android drivers - there are over 8mb limit of .7z files, so i cant add them here, just search intelandroiddrvsetup1.1.5.zip.
Connect tablet to pc with usb cable.
Unzip IntelAndroid-FBRL-05-16-2015-PTR.7z from @social-design-concepts and enter launcher.bat
type ACCEPT after reading the warning
Now:
- chose T2 if u are using Kitkat
- chose T4 if u are using Lollipop
Tablet reboots and after some screen artefacts (is normal) you are in temporary CWM recovery, which has a temporary root adb shell.
Keep tablet connected to pc.
Now download ADBfolder.7z, decompress it, and open inside a command prompt/window.
In this window insert commands, each followed by enter:
adb devices
adb shell id
adb shell mount /system
adb shell mv /system/etc/hosts /system/etc/hosts.bak
adb push hosts /system/etc/hosts
adb shell chmod 0644 /system/etc/hosts
adb shell mv /system/etc/permissions/platform.xml /system/etc/permissions/platform.xml.bak
adb push platform.xml /system/etc/permissions/platform.xml
adb shell chmod 0644 /system/etc/permissions/platform.xml
adb shell reboot
The tweaks remain even after factory reset.
For removing the tweaks, in case of installing oficial updates through OTA or manual, trigger again temporary CWM recovery, enter ADB folder, open command window and use these commands, each followed by enter:
adb devices
adb shell id
adb shell mount /system
adb shell rm /system/etc/hosts
adb shell mv /system/etc/hosts.bak /system/etc/hosts
adb shell rm /system/etc/permissions/platform.xml
adb shell mv /system/etc/permissions/platform.xml.bak /system/etc/permissions/platform.xml
adb shell reboot
It can be done, for lazy ones , with pasting these commands in two .bat files (one for install, other for remove), but I wanted ppl to see what is actually happening.
You can use another hosts file, but keep in mind the /system has limited space, so large ones may not fit.
Click to expand...
Click to collapse
where can i get this ADBfolder.7z?