Related
Ok first off I have to say that this site is great I have found alot of helpfull and some confusing topics here lol. the other day I downloaded the cyanogen mod 7 and everything is working perfectly on my htc evo sprint
my only problem I noticed is that I dont know how to revert back to The HTC Sense ui. My other question is that I noticed alot of different roms on here and some I have tried installing but some wont work for me and some freeze when i attempt to reboot. Can anyone help me out please!!!
To revert back to Sense from Cyanogen, you'll have to reflash the ROM that came stock on your device. You should be able to find this in the forum for your device (EVO).
There are many different ROMs available here, some will work for you and some you may experience difficulty with. Most Devs usually post step-by-step instructions for installing their ROMs in the Opening Post (OP) of the thread. If you follow these you'll usually be fine, and you can always flash back to stock and start again if you get into trouble.
Good luck, and welcome to XDA
Did you do a nandroid backup first? If not, you should always do one before flashing. If you did, just restore through your recovery & you'll be back where you were before.
If CM7 is functional but you just don't like it, I would go ahead and do a nandroid backup anyway, so if anything messes up you'll at least have something working you can restore.
If you want something like stock, I would suggest the Sprint Lover's Rom. Myn's Warm 2.2 would also be good, or you could try out Warm Z which is the new version of Sense. I'm assuming you like Sense as a UI & as a launcher?
I've heard great things about Mikfroyo as well. If you're new to rooting/flashing, I would suggest using a stable Rom instead of an experimental one - at least until you get the hang of it.
If you're having trouble flashing ROMs, try switching to Amon Ra recovery (I assume you're using clockwork) and try flashing again. You can do this through ROM Manager (it came with CM7). Just choose "flash alternate recovery".
Before rooting, modifying, and flashing ROMs, you're supposed to have a clear understanding of it all. I suggest reading the stickies in the Evo forums & any guides you can find. Read everything. Seriously.
I have an Evo as well, so if you need anything, I'm here. Just ask. If you need some guidance & handholding, send me a pm & I'll walk you through everything. Just be sure to educate yourself. There's no such thing as knowing too much when it comes to modifying your phone.
EDIT: If the phone gets stuck on the splash screen after flashing a Rom, it's most likely because you didn't wipe properly. Be sure to wipe data/factory reset, wipe cache & dalvik cache.
Thank u kindly
Both of you were helpful I will take my time and read and explore the forums in hopes of understanding clearly yes i am running clockwork is this ananran better? if so how can i use it ?
Just wanted to start off and say a BIG THANKS for LinuxBozo and his amazing infuse mod which lets us use the other samsung roms (JVQ restricted )
I have been experimenting ALOT with various roms and thought i would share some of which i have tested out so far, the only one which gave me some issues was Sensation 2.0 , seems like when you reboot, sometimes you get no netwrok, then reboot, and icons are missing, so its a question.
Obviously this isnt really an OFFICAL rom for the Infuse, but id like to know if anyone else has had nice experience or recommendations for use with this dude's rom.
Galaxy S I9000 ROMS
[ROM][07/07/2011] - Ryyu's EDB v1.3 [JVQ] -- New Improvements!
http://forum.xda-developers.com/showthread.php?t=1133395
[ROM] SpeedRom [JVQ][Fast & Stable] NEW NEW
http://forum.xda-developers.com/showthread.php?t=1189625
[ROM][19/7] GingerReal - V7.1.4 JVQ - Time to Downgrade - stability and speed
http://forum.xda-developers.com/showthread.php?t=1155623
[ROM] [22.07.2011] DarkyROM v10.2 ★ JVQ ★ What are you waiting for?
http://forum.xda-developers.com/showthread.php?t=814091
[ROM][02/08/2011] Tiramisu EVO 6.0/6.7 Summer Edition! JVP/JVQ BIG UPDATE OUT!
http://forum.xda-developers.com/showthread.php?t=1171476
Captivate Roms
[ROM][2.3.4][JVQ]Continuum v6.1 - v6.2 Beta Now Open!
http://forum.xda-developers.com/showthread.php?t=1136128
[ROM][2.3.4][JVQ][UPDATE: 7/31] DlevROM Version 4.2: Mods and Features Galore!
http://forum.xda-developers.com/showthread.php?t=1146176
{2.3.4 ROM} Mosaic VI {Team Phoenix}{7/30/2011}
http://forum.xda-developers.com/showthread.php?t=1061203
VIBRANT ROMS
[ROM] RevolutionRom JVQ Final Update 2 (2.3.4) 7.31.11 Definitely Fixed Bluetooth
http://forum.xda-developers.com/showthread.php?t=1192438
So this hack seems to be another way to get Gingerbread on your phone. Interesting.
I have been running Darky all day with no problems. Very fast and stable.
Sent from my GT-I9000 using XDA App
Just wanted to throw it out there I ran a JVP based ROM without issue for an hour or so. The only thing I had to do was add my APN settings back & all was well. Someone may need to test this a bit more but my experience went well.
Does the darky rom support HSPA+?
Sent from my SAMSUNG-SGH-I997 using XDA Premium App
Auto-Android said:
Does the darky rom support HSPA+?
Sent from my SAMSUNG-SGH-I997 using XDA Premium App
Click to expand...
Click to collapse
Hellraiser uses the same Rogers RIL that Infused v2 does, so probably not. (RIL is one of the things that gets swapped out.)
It's often hard to tell for sure because many frameworks won't show HSPA+ even if the RIL/modem are operating in that mode. Hell, even our original Froyo ROMs were broken in that way - they displayed UMTS when in HSPA+ mode. (UMTS is plain vanilla 3G.)
GingerReal - V7.1.4 JVQ
Been running GingerReal V7.1.4 JVQ with Infusion GB kernel and I must say it's snappy. I have not had a single problem with anything. And from what I read Quadrant scores don't mean much, but I got a 3500 OC at 1.6. without Stagefright. I did'nt know Stagefright was til I Googled it. But my phone is very fast and I am very happy. Thanks Linux
Infiniti350GT said:
Just wanted to throw it out there I ran a JVP based ROM without issue for an hour or so. The only thing I had to do was add my APN settings back & all was well. Someone may need to test this a bit more but my experience went well.
Click to expand...
Click to collapse
Which ROM did you test for JVP , i might give it a whirl, i finally finished going through all those roms, The Vibrant rom wasnt very exciting, and seemed to lack the extended power menu drop down which has Reboot, recovery download mode and such, thats a big thing for me.
Darky was my favorite so far,I might try Sensation. If anyone wants to test out a couple JVP roms and try adding in the APN settings, lets see what comes up and post which rom you tested.
Thanks everyone for their input on this, im getting more interested now and i will be trying to use the Infusion Kernel with some of these roms and see if i get a performance boost.
Im not sure if its just me, but whenever i reboot ANY of those roms which are installed with Linux's software , it seems sometimes the icons on the app drawer l ike disappearing, then when i reboot, apps reappear, but the Network to ATT gets cut off, then i reboot again, and sometimes its normal..........Any ideas?
prasadudwadia said:
Which ROM did you test for JVP , i might give it a whirl, i finally finished going through all those roms, The Vibrant rom wasnt very exciting, and seemed to lack the extended power menu drop down which has Reboot, recovery download mode and such, thats a big thing for me.
Darky was my favorite so far,I might try Sensation. If anyone wants to test out a couple JVP roms and try adding in the APN settings, lets see what comes up and post which rom you tested.
Thanks everyone for their input on this, im getting more interested now and i will be trying to use the Infusion Kernel with some of these roms and see if i get a performance boost.
Im not sure if its just me, but whenever i reboot ANY of those roms which are installed with Linux's software , it seems sometimes the icons on the app drawer l ike disappearing, then when i reboot, apps reappear, but the Network to ATT gets cut off, then i reboot again, and sometimes its normal..........Any ideas?
Click to expand...
Click to collapse
BTW, the default behavior in Sensation is no extended power menu, but if you use the app "Theme Settings (included in the ROM) you can change this.
As to the other issues - that's a new one, I haven't seen it before.
prasadudwadia said:
Which ROM did you test for JVP , i might give it a whirl, i finally finished going through all those roms, The Vibrant rom wasnt very exciting, and seemed to lack the extended power menu drop down which has Reboot, recovery download mode and such, thats a big thing for me.
Darky was my favorite so far,I might try Sensation. If anyone wants to test out a couple JVP roms and try adding in the APN settings, lets see what comes up and post which rom you tested.
Thanks everyone for their input on this, im getting more interested now and i will be trying to use the Infusion Kernel with some of these roms and see if i get a performance boost.
Im not sure if its just me, but whenever i reboot ANY of those roms which are installed with Linux's software , it seems sometimes the icons on the app drawer l ike disappearing, then when i reboot, apps reappear, but the Network to ATT gets cut off, then i reboot again, and sometimes its normal..........Any ideas?
Click to expand...
Click to collapse
I ran Hawkish 4 http://forum.xda-developers.com/showthread.php?t=1032599
I chose it because I saw that the ROM included the background effect from the SGSII, which while I have the SGSII & this feature seems to throw my photos to the way over saturated side - its more appealing for home screen settings and every day use since everything just looked almost wet or gooey. But the setting didn't work I imagine a kernel conflict, but I'm sure this could be built into one of our ROMS later and I wouldn't mind helping out with putting it together.
Overall I thought this ROM was a little laggy for the phone, I'm sure there are others out there that could run MUCH better or smoother.
I find it funny that we get a stock phone and find it boring so we flash a brand new phone to something completely different within an hour and when the next phone comes out we want their stock stuff so we can see how it is on OUR phone...HAHAHA -addicted
Infiniti350GT said:
I ran Hawkish 4 http://forum.xda-developers.com/showthread.php?t=1032599
I chose it because I saw that the ROM included the background effect from the SGSII, which while I have the SGSII & this feature seems to throw my photos to the way over saturated side - its more appealing for home screen settings and every day use since everything just looked almost wet or gooey. But the setting didn't work I imagine a kernel conflict, but I'm sure this could be built into one of our ROMS later and I wouldn't mind helping out with putting it together.
Overall I thought this ROM was a little laggy for the phone, I'm sure there are others out there that could run MUCH better or smoother.
I find it funny that we get a stock phone and find it boring so we flash a brand new phone to something completely different within an hour and when the next phone comes out we want their stock stuff so we can see how it is on OUR phone...HAHAHA -addicted
Click to expand...
Click to collapse
I think those are controls for Voodoo Color which:
1) Is extremely difficult to implement on our device (significantly different screen)
2) Is not necessary on our device - our screen fixes most if not all of the problems VC was intended to fix.
Entropy512 said:
I think those are controls for Voodoo Color which:
1) Is extremely difficult to implement on our device (significantly different screen)
2) Is not necessary on our device - our screen fixes most if not all of the problems VC was intended to fix.
Click to expand...
Click to collapse
Yes sir, I believe you are exactly right. I normally don't like over saturation, but on a HUGE screen it looked great with some gooey gingerbread green stuff around it. My photography looked horrible especially HDR shots, worth it though. The colors on the SGSII and this phone are pretty different tho. But a lot to do with the same resolution on a smaller screen. The screen on the Infuse is a big (no pun) factor that held me to it rather than the SGSII
bigfau said:
Been running GingerReal V7.1.4 JVQ with Infusion GB kernel and I must say it's snappy. I have not had a single problem with anything. And from what I read Quadrant scores don't mean much, but I got a 3500 OC at 1.6. without Stagefright. I did'nt know Stagefright was til I Googled it. But my phone is very fast and I am very happy. Thanks Linux
Click to expand...
Click to collapse
i as well got the same results, but did you have a problem with the modem. mine would work for about 3 min and then i would no longer have network connection.
i had to change the modem to get it work really smooth, but yes this set is pretty good.
Infiniti350GT said:
Just wanted to throw it out there I ran a JVP based ROM without issue for an hour or so. The only thing I had to do was add my APN settings back & all was well. Someone may need to test this a bit more but my experience went well.
Click to expand...
Click to collapse
Man! I'm so upset. I flashed this ROM twice, but it would not boot. Did you flash from stock? I don't know what I did wrong.
tekgurl said:
Man! I'm so upset. I flashed this ROM twice, but it would not boot. Did you flash from stock? I don't know what I did wrong.
Click to expand...
Click to collapse
Okay heres me scenario, hope it helps understand.
1) started off with phone already rooted and such and previously had Infused V2.00 full., Downloaded a JVQ rom ( like Darky's ) , and then downloaded Linux Bozo's rom/mod ) Put both of the zips on the ROOT of the internal SD .
2) backup info and boot into Red recovery.( Shut off device, then hold Vol - and + while pressing power ), release power and continue holding both volume keys).
3) Perform the following
Wipe Data/Factory Reset, Wipe Cache partition, Wipe Dalvik Cache
Install zip from SD card and select the ROM you want to use
Do install from SD card again and this time select the Linux Bozo zip
4) Reboot and you will be in your rom after 10 minutes ( be patient, it takes time ). If you want better performance, install the Infuse GB Kernel. Get it here
http://forum.xda-developers.com/showthread.php?t=1212485
5) Enjoy the rom
prasadudwadia said:
Okay heres me scenario, hope it helps understand.
1) started off with phone already rooted and such and previously had Infused V2.00 full., Downloaded a JVQ rom ( like Darky's ) , and then downloaded Linux Bozo's rom/mod ) Put both of the zips on the ROOT of the internal SD .
2) backup info and boot into Red recovery.( Shut off device, then hold Vol - and + while pressing power ), release power and continue holding both volume keys).
3) Perform the following
Wipe Data/Factory Reset, Wipe Cache partition, Wipe Dalvik Cache
Install zip from SD card and select the ROM you want to use
Do install from SD card again and this time select the Linux Bozo zip
4) Reboot and you will be in your rom after 10 minutes ( be patient, it takes time ). If you want better performance, install the Infuse GB Kernel. Get it here
http://forum.xda-developers.com/showthread.php?t=1212485
5) Enjoy the rom
Click to expand...
Click to collapse
I've successfully flashed a JVQ Rom. I'm trying to figure out how Infiniti350 was able to flash a JVP Rom.
tekgurl said:
I've successfully flashed a JVQ Rom. I'm trying to figure out how Infiniti350 was able to flash a JVP Rom.
Click to expand...
Click to collapse
I just followed the exact instructions the OP posted up above. With 1 mishap, when I downloaded what I thought was the ROM....I only got the lock-screen (what happens when you read things way too fast & think you know what you did) which I already downloaded and flashed
I mounted the SD card while in recovery and pushed the file containing the ROM over to the phone - flashed it - flashed LinuzBozo's stuff - rebooted & things went well all I had to do was add APN's back.
I really like my current set up BUT I'll probably find something else, before I load the ROM I want I'll run this again with a JVP base and see how things go & defiantly let you guys know. Now I'm curious why it doesn't work for other people.
Infiniti350GT said:
I just followed the exact instructions the OP posted up above. With 1 mishap, when I downloaded what I thought was the ROM....I only got the lock-screen (what happens when you read things way too fast & think you know what you did) which I already downloaded and flashed
I mounted the SD card while in recovery and pushed the file containing the ROM over to the phone - flashed it - flashed LinuzBozo's stuff - rebooted & things went well all I had to do was add APN's back.
I really like my current set up BUT I'll probably find something else, before I load the ROM I want I'll run this again with a JVP base and see how things go & defiantly let you guys know. Now I'm curious why it doesn't work for other people.
Click to expand...
Click to collapse
I think sometimes people either have a bad flash or don't properly wipe data. Same reason lots of people randomly had problems with Infused. (I haven't tried JVP myself though.)
Well, i just finished wrapping up my favorite roms, and i keep jumping between the Sensation rom, and Darky's Rom .
BUT!
I always data wipe, clear cache, factory reset
Idk if this helps, but i saw theres a new Linuz BETA 6 , perhaps this might help problems that a few have been going through.
In closing, i really hope more ROMS designed for the Infuse come fast , i got a feeling with this new mod there will be many to come
Entropy512 said:
I think sometimes people either have a bad flash or don't properly wipe data. Same reason lots of people randomly had problems with Infused. (I haven't tried JVP myself though.)
Click to expand...
Click to collapse
This is a very good point. The data wipe is vital for the Infuse no matter what. I have tried it with and without the wipe & all sorts of very strange things go wrong at random. Market apps wont download - Errors when using data - Youtube errors - issues with email. Each time I did it different ones would act up too, never the same.
Full Wipe so far has fixed it without failure
*Edit - Full for me same as prasadudwadia said above - data, cache, and factory reset.
I've been searching the forums and I've seen people replace their respective stock mms.apk. I just got my 4g slide, coming from the g2 and im not used to this sense mms stuff. I liked the stock mms in the g2 way better. I tried handcent/chomp/go sms...neither was my thing. I'm rooted so if I had to mod anything, thats good...I just need instructions. I just want the regular android 2.3 stock mms i was using in my g2. Is there anyway to accomplish this? Really appreciate it
If you post up the .apk you want to use in this thread, i'll take a look at flashing it to my phone when I get home from work this afternoon. I'm going to run through all the ROMs I have in sequence testing the custom kernel in the dev section, but right now at this moment my phone has it's stock ROM running.
I can write the update and flash it to see if it works before I go about erasing everything on the phone - just an fyi though, i've never actually done any text messaging on the phone so I can't tell you how well it will work, just if it installs and opens fine.
If it does, i'll post the flashable update i'll end up making so you can run with it...unless someone else gets to it before I get back here today.
Blue6IX said:
If you post up the .apk you want to use in this thread, i'll take a look at flashing it to my phone when I get home from work this afternoon. I'm going to run through all the ROMs I have in sequence testing the custom kernel in the dev section, but right now at this moment my phone has it's stock ROM running.
I can write the update and flash it to see if it works before I go about erasing everything on the phone - just an fyi though, i've never actually done any text messaging on the phone so I can't tell you how well it will work, just if it installs and opens fine.
If it does, i'll post the flashable update i'll end up making so you can run with it...unless someone else gets to it before I get back here today.
Click to expand...
Click to collapse
Good stuff, I found this here:
http://forum.xda-developers.com/showthread.php?t=1203665
as well as :http://forum.xda-developers.com/showthread.php?t=1253108
...but they report problems with mms not working. maybe u can download either mms.apk package and see what u come up with?
First off, thanks for stopping by to assist. Secondly, I just bought a used G2X off ebay and it came already rooted, with super user already installed. However, there's no rom on there and it's still running Froyo 2.2.2.
I haven't messed with rooting, recovery, or ROMs since my G1 so I'm quite rusty, leaving me with a few questions.
1. I know LG just released a Gingerbread update, yet I can't access it or any of the previous updates through the about phone update area. That's because I'm rooted right? I wouldn't mind just having stock 2.3.4 on here for now.
2. I don't know if the previous owner already put a custom recovery on here or not (not very talkative) so is there a way for me to check that? I was reading that if I boot into recovery without a custom one installed, the default recovery automatically starts wiping and reformating and I don't want that.
3. And just a general consensus question, coming from my horrible Samsung vibrant, GB roms are the way to go with this phone right, avoid the ICS?
Thank you in advance for all your help. Appreciations.
To check if you have a custom recovery power off phone and then boot into recovery mode via Power + volume down until you see 2nd LG logo, then release. The recovery type will be on top of the screen and bottom if I remember right. To update through Over The Air, I believe you need to be stock completely.
1. unroot, and most of what you need is here http://forum.xda-developers.com/showthread.php?t=1049154
2.That might be the case I'm not sure, I think completely factory resetting the phone is doable by holding power + volume down/up... Not completely sure as that is as far back as I can remember when the phone was 1st released a year ago. the least you can do is try if you plan on flashing a custom rom.
3. Personally I like CM7 based roms... or at the least 2.3.3 roms, that have been customized.
Overall this phone is cake walk compared to flashing the G1 with all the partitions and the gold card and what not...
That's what I was going to do, but then I read this:
To perform a master reset using the hardware keys, follow these steps:
Back up all necessary data. See: Prepare for a master reset and back up data on Android
Turn off the phone.
Press and hold the Power and Volume Down, key.
The phone will turn on and display the LG Logo
Wait 30 seconds and thephone will display the open box and arrow pointing towards the phone.
Release the keys, and the phone will reset back to the start up screen.
And so I'm catious about checking that right now because I don't want it to reset right now, kind of has used to use it right now.
I actually miss root, so I think I will stay rooted and check out one of these nice GB ROMS. Man, I have missed custom ROMS lol Now it's just a matter of deciding which is the best to use. So out of th eloop anymore on this stuff.
And yeah, the G1 was an adventure. Soft bricked it twice before.
Ummmm well either way if you do flash a custom rom, you are gonna need to wipe regardless. PM with any questions after you do some searching. All the links and questions you have should be out there already.
Sent from my LG-P999 using xda premium
Thank you for posting an intelligent thread. Basically if you don't want to wipe then you need to install cwm through nvflash, then create a backup. After that flash a rooted froyo rom. If you flash gb over froyo you will most likely have issues if you do not wipe properly. You can try it...but more then likely issues will arise.
Sent from my LG-P999 using xda premium
ICS roms are buggy and are awesome but if you dont want any problems GB shouldn't fail you. The first ROM I used were ICS but after months of not being able to record anything I had to try out GB and so far these roms are perfect. The ICS are still badass but I suggest you mess around with all of them though G2x has awesome devs.
I can confirm that if you hold the volume down and power until the second LG screen comes up you will factory reset the phone. I accidentally did it yesterday when I flashed the stock recovery back on the phone and wanted to check and see if it had worked. I'm a complete noob with flashing etc but like mt3g said all the info is here just look around for it.
Sent from my LG-P999 using XDA
2war said:
ICS roms are buggy and are awesome but if you dont want any problems GB shouldn't fail you. The first ROM I used were ICS but after months of not being able to record anything I had to try out GB and so far these roms are perfect. The ICS are still badass but I suggest you mess around with all of them though G2x has awesome devs.
Click to expand...
Click to collapse
You could have recorded videos by downloading an app called video cam illusion. It does the job.
I forgot about my own thread! lol But thanks for all the insight and help. Currently running into a mobile network/data drop issue so taking advantage and flashing a whole bunch of different roms. From MIUI to Kang Banger is like 2 opposite ends of the spectrum, but I love them both!
I just installed UCLD2 Smooth ICE 5.0 followed his instructions and I like the Rom, but I have an issue. My home button and search button do not work at all. I've gone into the settings to see if there is anything to change what the buttons do, but I've found nothing.
Does anyone know what could be causing this? Or what I can do to fix it.
I had the same issue with flashing sky is. I did a nandroid recovery, then reflashed the whole thing and allowed the system to settle longer than the suggested 5 minutes. It works great now. Buttons are fine.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Well as it turns out that was only one of a myriad of problems, I may or may not have permanantly bricked my phone. I let the system settle, but now the screen isn't very responsive when I try to do anything on it. I also tried returning to stock, and have had the same problems.
I don't have any idea what happened, but it seems to be like a kernel problem.
CrazyLineman777 said:
Well as it turns out that was only one of a myriad of problems, I may or may not have permanantly bricked my phone. I let the system settle, but now the screen isn't very responsive when I try to do anything on it. I also tried returning to stock, and have had the same problems.
I don't have any idea what happened, but it seems to be like a kernel problem.
Click to expand...
Click to collapse
If it turns on then its far from bricked. What was your method of returning to stock?
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
There's been way too much of this nonsense recently. You don't even know what a brick is. All the new guys need to stop flashing everything they can get their hands on. Stop and read before you do this stuff to your phone. I read for almost a whole month, everything I could find before doing anything. Before I even flashed anything, I had everything needed to fix and return to stock, and made sure I completely understood what I was doing. Read and understand before you break stuff so you can fix it!
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
I...I....I give up Congrats noobs not just op you have killed my faith in humanity you all have won and destroyed my spirits
Sent from my SGH-T989 using Tapatalk 2
When most of us first installed the leak the fix was to install it again with the 1 click or factory reset.... Are you coming from stock gb or stock ics leak?
Edit: nrm and dx you guys crack me up
CM9 Skyrocket
I didn't flash whatever I could get my hands on thank you. I flashed NexusMod 4.3 Nexus UI first about a week and a half ago. Then I wanted to try and get something a little more like stock, but still ICS so after READING ALL THE INFORMATION on the post for ICS Smoothie v2 I flashed it after wiping data, cache, and dalvik and following the instructions regarding an ICS radio which I had not followed previously with Nexus Mod when I flashed it. Then the problems started.
There is no lockscreen even when the phone decides to work. When I start up the phone. Process.google.acore force closes as does process.google.gapps
Also when I unlock the phone the screen will respond to 1 maybe 2 swipes to find a homescreen then it'll hang.
I used ODIN to return to stock following the instructions on the Stickied post about doing so in the Development section. Also I'm sorry if some of what I said comes off rude I've just been trying to fix this for about 4 days with no luck and I really need some help.
Also I would've responded sooner, but it's finals week at my college so I've only got so much time.
Also I apologize for calling it a brick even though it was not. I do know what a brick is. It's when your device is unresponsive and will not turn on or do anything. It'a a paperweight or a brick.
I was freaking out my bad. I am sort of seasoned I was rooting my HTC Inspire when I got it almost a year ago, and I put ICS on it when the first leaks started coming out. I'm sorry I'm new to this phone. I will be getting better trust me. I just need some time to get used to the different quirks involved in this phone compared to my last one.
CrazyLineman777 said:
Also I apologize for calling it a brick even though it was not. I do know what a brick is. It's when your device is unresponsive and will not turn on or do anything. It'a a paperweight or a brick.
I was freaking out my bad. I am sort of seasoned I was rooting my HTC Inspire when I got it almost a year ago, and I put ICS on it when the first leaks started coming out. I'm sorry I'm new to this phone. I will be getting better trust me. I just need some time to get used to the different quirks involved in this phone compared to my last one.
Click to expand...
Click to collapse
My suggestion still stands use the ics leak 1 click then root see how you like stock ics twiz if you want a more custom rom then goto cwm and wipe cache , factory reset, then in mounts wipe sys, wipe cache and wipe data do all of these 3 times before installing rom and kernel always let.it sit a few minutes to settle....
CM9 Skyrocket
Ok I'm sorry for causing all of these issues I think I found a solution. In the General section and since I can't post links it is entitled:
[FIX] No Power Menu, No Lockscreen, Corrupt Efs FIX! Skyrocket and T989
Sorry I didn't look in General before posting this in Q&A the General section in the HTC Inspire forum wasn't usually gonna have fixes in it maybe root methods, but not fixes for stuff like this.
CrazyLineman777 said:
Ok I'm sorry for causing all of these issues I think I found a solution. In the General section and since I can't post links it is entitled:
[FIX] No Power Menu, No Lockscreen, Corrupt Efs FIX! Skyrocket and T989
Sorry I didn't look in General before posting this in Q&A the General section in the HTC Inspire forum wasn't usually gonna have fixes in it maybe root methods, but not fixes for stuff like this.
Click to expand...
Click to collapse
What radio did you flash?
I did realize I had done it wrong I flashed this: ATT-GALAXY-NOTE UCLC5 radio
but it was the one located in the post for Embryo 2.2 and I didn't flash the embryo rom, so the radio file which Mohan made specifically for his rom didn't go over well with the rom I flashed.
I did get back to stock eventually. It just took a few tries and the efs fix. I'm now putting CWM touch back on my phone and flashing a Gingerbread Rom because ICS on our phone is still a little too iffy for my likeing. I'll probably just wait till Samsung releases source for the kernel and cook my own rom.
CrazyLineman777 said:
I did realize I had done it wrong I flashed this: ATT-GALAXY-NOTE UCLC5 radio
but it was the one located in the post for Embryo 2.2 and I didn't flash the embryo rom, so the radio file which Mohan made specifically for his rom didn't go over well with the rom I flashed.
I did get back to stock eventually. It just took a few tries and the efs fix. I'm now putting CWM touch back on my phone and flashing a Gingerbread Rom because ICS on our phone is still a little too iffy for my likeing. I'll probably just wait till Samsung releases source for the kernel and cook my own rom.
Click to expand...
Click to collapse
I see, the note modem corrupts the efs partition. Glad you read some things and got it fixed!