Here are some frequently asked questions about the G-Tablet. Where there are specific answers based on ROM, the ROM is listed prior to the answer.
How do I install Clockworkmod?
See Step 1 of THIS POST
OR watch THIS VIDEO
How do I boot into Clockworkmod?
With the device completely off (and not asleep/suspended), press the + volume button and the power button until the device turns on. If it is successfully booting into Clockworkmod, you will see a message at the top left of the screen saying booting recovery image.
How do I perform a wipe data/factory reset?
With Clockworkmod, select the third option in the menu "wipe data/factory reset" and press the Home key (second button down on the right side of the gTablet in landscape view). Then, confirm wipe by selecting "Yes - wipe data/factory reset" and press the Home key again.
How do I clear the cache?
With Clockworkmod, select the fourth option in the menu "wipe cache partition" and press the Home key (second button down on the right side of the gTablet in landscape view). Then, confirm wipe by selecting "Yes - Wipe Cache" and press the Home key again.
How do I install VEGAn-TAB/TnT Lite/Cyanogenmod?
See the very first post of THIS THREAD
Where can I find the different ROMs for the G-Tablet?
1) Stock by Viewsonic
2) Stock + Performance Pack by rothnic
3) Tnt Lite 4.1 by Roebeet
4) VEGAn-TAB beta 5.1 by gojimi, Roebeet and Rothic
5) Zpad Clean 3.0 by rothnic
6) CyanogenMod 6.1 Beta4 by bekriebel
7) CyanogenMod 7.0 RC0 beta3 by bittrix
8) Tnt G-Harmony-Gingerbread Elements by tjohnsonjr
9) Plus the great kernel enhancement by clemsyn.
Keyboard and Mouse Support
VEGAn-TAB: Yes; supports an external keyboard and mouse, but it is picky. I have tested three keyboards; only one worked (MS Natural Keyboard). The MS Arc and an old Compaq keyboard did not. All mouses tested worked fine (both wireless and wired).
TnT-Lite: In testing; will update when testing complete.
Cyanogenmod 6.1b4: Yes; According to iammuze, keyboard and mouse both work.
Wallpaper blurry
Some have pointed to applications that can possibly fix this (Wallpaper Set & Save, MultiPicture Live Wallpaper) but I have had limited success with both of these. A bit of experimenting with different wallpapers will yield a satisfactory wallpaper image until this is cleared up at a later time.
Screen resolution in landscape (horizontal) mode
1024 x 600. Remember that if you're making wallpaper, when using the G-Tab in portrait mode (vertically) will make the wallpaper shrink and there will be black bars on top and below the image. Best image size: 1024 x 1024.
How do I get a fully working Marketplace?
See Step 3 of THIS POST
Is there a difference between the marketplace that comes with most G-Tablet ROM builds or the new "improved" market?
The only difference is the appearance. In functionality, it is the same. The market hack is still required for the new improved marketplace (and reports are that it often takes more tries to make work than the standard market).
Problems with acore FC's
The problem is a corrupt contacts sqlite database. As the referenced post says, you'll be able to tell if thats the problem when there is a .db-journal file in the folder. The folder is /data/data/com.android.providers.contacts/databases/ *Note* this is not the data folder in sdcard, but the data folder in root (/).
Just delete the databases folder in /data/data/com.android.providers.contacts and restart. The contacts database will be rebuilt and re-synced.
Also, see THIS THREAD/FAQ
Why do I keep seeing repartitioning as a solution to install problems?
Because Viewsonic didn't partition the G-Tablets in a way that Android likes to live on. By repartitioning, Android feels happier and many issues/problems are resolved.
What is the recommended repartition ratio?
2GB/0MB is STRONGLY recommended for TnT Lite 3.00+
2GB/256MB is considered the default setup
4GB/256MB is used by many people, but see the aforementioned caveat regarding TnT Lite.
Why won't one of the devs answer my question/post?
Because they:
1. Have day jobs.
2. Are busy coding and fixing the next release of VEGAn-TAB.
3. Have seen your question 23 times already in this thread: the search function is your friend.
4. Are not being paid to read forums and go through 100's of posts, many of which ask the same question (although they do this out of the kindness of their hearts thankfully!!!).
Who are the devs working on the G-Tablet
VEGAn-TAB: Gojimi, Rothnic, and Roebeet
TnT-Lite: Roebeet
Cyanogenmod 6.1b4: bekriebel
I can't get X to work on my G-Tab. Can you fix it? (where x = desired ROM)
Maybe. Maybe not. Currently, VEGAn-TAB is in Beta which means that it's still in testing. While it may be stable and usable for most people, it doesn't mean that it will be completely stable for you. If you have problems, post them and be happy knowing that you're helping the community at-large. Some problems may not be reproducible, however. In that case, it may be a matter of a corrupt install, conflict with previous install, cache or data issue, etc.
Do the dev's accept donations for their work?
Some do; others don't. If you see a donate button on their profile, feel free. If not, they don't accept them.
How to get the stock VEGAn-TAB wallpaper without the letters?
See attached image in 1024 x 1024.
More Advanced Questions.
Can the startup "Viewsonic Birds" or "gTablet" screens be changed?
Yes they can. Follow the instructions in THIS POST.
gTablet Recovery Firmware Images (Official Viewsonic Images) Courtesy of Roebeet
TnT 3316 recovery ROM, dated 12/19 and supplied by Viewsonic / TnT. Link: http://tapntap.http.internapcdn.net/...-3316-user.zip
Alternate link: http://www.mediafire.com/?p9o52540baa5vfg
md5sum: 1333e22b6d802096d3c63757680777f0
TnT 3053 recovery ROM, dated 12/10 and supplied by Viewsonic / TnT. Link: http://tapntap.http.internapcdn.net/...-3053-user.zip
Alternate link: http://www.mediafire.com/?qy92jzoz8upy8xa
md5sum: 7b800e409b5324f2c69e7ba6f84eab97
TnT 2967 recovery ROM, dated 11/22 and supplied by Viewsonic / TnT. Link: http://tapntap.http.internapcdn.net/...-2967-user.zip
Alternate Link: http://www.mediafire.com/?99eb11cqhvrkkc7
md5sum: 43eb0358db25b492751b1b0a71568c51
These were grabbed from over-the-air updates. They are full recovery images that wipes everything except the user data.
To use this with a vanilla recovery, you need to rename the file to update.zip, copy it to the root of /sdcard, and also create a recovery folder with a file called "command" (see the 1.00 release for that file). When you run recovery, the command file will direct recovery to run the update.zip to update the system.
-----------------------------------------------------------------
1.0.0 homebrew link: http://forum.tegratab.com/viewtopic.php?f=6&t=16
This was developed by the user community to allow you to flash back to a vanilla setup, in case something goes wrong with a mod or if you want to return the item. This is the ORIGINAL firmware of the device, from early November.
Reserved for future use #3.
Great FAQ!
"Why won't one of the devs answer my question/post?" is so true. I scan this forum daily, but there is no way to keep up with all the questions that pop up (especially once it's back more than 2 pages). If you really need me, PM me - at least I'll eventually see the question. But, keep in mind that I get more PM's than you might realize, so it could take me some time to respond.
@ehunyadi as Robeet said Great FAQ. This will definitely help alot of people.
Now I just need to find free time at home to test out the vegan ROM.
Maybe this should be a sticky?
roebeet said:
Great FAQ!
Click to expand...
Click to collapse
copc said:
@ehunyadi as Robeet said Great FAQ. This will definitely help alot of people.
Now I just need to find free time at home to test out the vegan ROM.
Maybe this should be a sticky?
Click to expand...
Click to collapse
Thanks, guys.
I tried to change the title of this thread to encompass all flavors of G-Tab ROMs but I think only a mod can do that.
I am going to start including info about all the different ROMs in here as well to help keep things simple in regards to finding the FAQ's in one place. This SHOULD help reduce the questions a bit. At least that's my hope.
Awesome job! Thank you so much for this! I posted your video of VEGAn-TAB on our new ROM homepage. Check it out @ HTTP://vegantab.gojimi.com.
gojimi said:
Awesome job! Thank you so much for this! I posted your video of VEGAn-TAB on our new ROM homepage. Check it out @ HTTP://vegantab.gojimi.com.
Click to expand...
Click to collapse
Very nice site!!!
Any chance of your sending me either the font or the artwork you used for the words VEGAn-TAB? I'd like to try some things with it on my G-Tab.
Thanks for posting my video!
ehunyadi said:
Why do I keep seeing repartitioning as a solution to install problems?
Because Viewsonic didn't partition the G-Tablets in a way that Android likes to live on. By repartitioning, Android feels happier and many issues/problems are resolved.
Click to expand...
Click to collapse
Any chance of getting an explanation / step by step of how to partition?
ssmithri said:
Any chance of getting an explanation / step by step of how to partition?
Click to expand...
Click to collapse
Sure. I can put that in here. Give me some time; I'm having a busy day at work today.
ehunyadi,
I forgot about this thread, but you may want to see my thread up higher about a site I found which offers a .pdf of the Advent Vega manual and some software for those capable of working with it.
The manual explains operation of much of the ROM interface.
http://www.myadventvega.co.uk/
Oops, I had the link in memory and so I just pasted it in for you to look at.
Rev
I'd like to know/see in the faq what in the SDCARD folder is safe to delete
or how to do a complete wipe
and: Where do my installed applications go?
Thanks a lot for the FAQ Ehunyadi
You guys rock!!!
How do I install VEGAn-TAB?
See the very first post of THIS THREAD
Click to expand...
Click to collapse
OK, I am a n00b to the Gtab scene. I do read the first post 99.9% of the time, but when the first post leads me to an incorrect first post about how to install, I must make mention of that fact. The first post mentioned does not have any instructions for installing. Is there a step by step tutorial for this to be found?
TIA ..... HTR
I see you added the link to the default wallpaper without the branding but what is the location of the default Vegan wallpaper or at least a link to it? I changed my wallpaper and now would like to revert but do not know the location. Thanks a lot.
comhack said:
I see you added the link to the default wallpaper without the branding but what is the location of the default Vegan wallpaper or at least a link to it? I changed my wallpaper and now would like to revert but do not know the location. Thanks a lot.
Click to expand...
Click to collapse
Once you change it from the default, there's no known way to go back right now.
Edited to add: You can always use the image an image that is identical to what VEGAn-TAB comes with stock, but this has to be downloaded and selected from gallery/filesystem vs going back to the default wallpaper.
hitekredneck said:
OK, I am a n00b to the Gtab scene. I do read the first post 99.9% of the time, but when the first post leads me to an incorrect first post about how to install, I must make mention of that fact. The first post mentioned does not have any instructions for installing. Is there a step by step tutorial for this to be found?
TIA ..... HTR
Click to expand...
Click to collapse
Good point; I'll fix that link.
As for a step-by-step, you can view THIS VIDEO that takes you through the steps of installing with Clockworkmod. Ignore the fact that it already has an OS on the G-Tab; you can do this with a fresh install as well.
Also, see THIS THREAD for step-by-step instructions. I'll fix the first post in the thread to reflect the change.
Here is the default Vegan wallpaper:
Thanks Trist-Wolf!!!
Updated to encompass ALL ROM flavors. If one is missing, or if you have useful information that you would like to see in the FAQ, please post or PM me directly.
Hello,
I have a HTC Touch Diamond 100 and I installed the "Froyo FRX06 XDandroid NEW system update" review in the post "[prj] [XDANDROID] [AOSP] [FroYo | GINGERBREAD] [31.03] System Update" and everything works fine except that it doesn't recognize SDcard applications.
There's no Error Message in the screen, is just that the system doesn't recognice anything in the SDcard. I put my apps in the folder: AndroidApps-> Other. I think it's not the common fault that I have read many people have "Waiting for SDCard error. For people who have problems with sdcard message, add this to your startupmsmsdcc_1bit msmsdcc_fmax=14000000 msmsdcc_nopwrsave" because for instance the phone let me save the pictures i've take with the camera phone or install and recognice any app from the market.
I 've Format the card with the HP tools after initial installation and then i had restore all the files in the internal storage.
P.S. Sorry for my possible spelling mistakes but English is not my native language
Keep in mind if you put the apk in anything other than the AndroidApps folder you will need to install them yourself. See THIS FAQ for further explanation. As far as the wating on sd card message you get when you are booting into Android, I get those all the time and have no problems with taking pictures. I would suggest that you use the full bundle from THIS post to ensure you have the latest. Unless you know what you are doing
R^7Z said:
Keep in mind if you put the apk in anything other than the AndroidApps folder you will need to install them yourself. See THIS FAQ for further explanation. As far as the wating on sd card message you get when you are booting into Android, I get those all the time and have no problems with taking pictures. I would suggest that you use the full bundle from THIS post to ensure you have the latest. Unless you know what you are doing
Click to expand...
Click to collapse
Oh what A noob mistake xD I didn't know that apps in the "Other" folder doesn't follow the "typical rules" for instaling apps (i've come from previous releases of Android, Eclair specifically, and in that version it was only place in this folder to install apps).
I'm using froyo instead of gingerbread builts because HTC touch Diamond it's quite old and i don't know if the performance would be better or slower than froyo performace but if you recomend me to use that gingerbread bundle i would use it.
Thanks R^7Z.
Honestly, Gingerbread is "better" but it is alpha release at the moment. Yes, this means that there are quite a few more "improvements" to under-go! I only recommend it if you like the idea of Android. The latest releases for FroYo aren't bad but it seems there are a few hard instability hits it has taken since FRX03 (last time I really enjoyed running a FroYo build from the XDAndroid project). Since then, I've been playing around with a few things and builds to include but not limited to this new idea of CWM (clockwork mod/Gingercherry tutorial) which is posted in the neopeek forums. So, unless you've got an idea as to how neopeek variants work, it's suggested to stick with the XDAndroid builds...
R^7Z said:
Honestly, Gingerbread is "better" but it is alpha release at the moment. Yes, this means that there are quite a few more "improvements" to under-go! I only recommend it if you like the idea of Android. The latest releases for FroYo aren't bad but it seems there are a few hard instability hits it has taken since FRX03 (last time I really enjoyed running a FroYo build from the XDAndroid project). Since then, I've been playing around with a few things and builds to include but not limited to this new idea of CWM (clockwork mod/Gingercherry tutorial) which is posted in the neopeek forums. So, unless you've got an idea as to how neopeek variants work, it's suggested to stick with the XDAndroid builds...
Click to expand...
Click to collapse
I see what you say but honestly, right now, I'm looking for stability and performace, if you know that gingerbread build GBX0A have better performance (i supose that it's less stable because it's an alpha) than FRX06 i'll choose Ginger
Thanks again R^7Z.
Q&A for [ROM][2.3.6] AEON v1.4SL STABILITY AT ITS FINEST
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][2.3.6] AEON v1.4SL STABILITY AT ITS FINEST. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Where to go from here
Not sure what happened, hope this didn't get posted twice.
Hi,
I am still happily using the Samsung Infuse 4G, and was running the stock GB 2.3.6. No real issues, and although starting to get a sense of it being dated was having no issues and in no rush to go out and upgrade. However, we recently purchased a 2015 Subaru Legacy with their Starlink multimedia system. The Infuse, as it was with the stock GB had no problems connecting via BT for phone and audio functionality. But, the car system reports that the phone is not compatible for messaging. In my endeavors to understand why, I thought, maybe incorrectly, that GB does not support the MAP profile.
So, that led me to, is it possible to add that, and how do you do it, or is it time to upgrade? Flash a new ROM? I can't seem to find much on the specific issue I am trying to resolve and if a new ROM would fix it, but since the phone is way out of warranty I decided to try rooting and flashing a ROM. I am new to this so I went with the Aeon 1.4 ROM based on GB 2.3.6 (I think), hoping that it was a bit less risky. Everything went well and seems to be working fine. But, it did not fix the messaging issue with the car. I assume because it is really still GB.
Am I going about this wrong? Would a flash up to ICS or beyond possibly do it? I am not totally against a new phone, but till now I wasn't even thinking about a new phone. Suggestions? Which ICS, or other ROM would you recommend? Thanks all.
Hi there,
mainwheel said:
Would a flash up to ICS or beyond possibly do it? I am not totally against a new phone, but till now I wasn't even thinking about a new phone. Suggestions? Which ICS, or other ROM would you recommend? Thanks all.
Click to expand...
Click to collapse
I think your car requires the newest bluetooth protocol (4.0), something that is primarily hardware based.
I could be (and hopefully am) wrong here, but the only way to find out is to do a ROM walkabout.
ICS is out right off the bat, as bluetooth was borked in that version (IIRC). You'll need to upgrade to that in the process anyway, as CWM for this device doesn't like drastic changes.
I am biased, but I would try CarbonROM 4.4.4 (the latest, unofficial build) or at the very least CM 10.1. The former would have the best chance of support (being latest firmware available), but it may be overkill for your situation (newer versions = harder on battery life).
So I would try CM 10.1 after stepping up to ICS (having done a full nandroid before all this), and if the car still refuses to connect, try Carbon. Then you may be able to prove me wrong.
Hope this helps.
Sent from my MeMO Pad 8"
joel.maxuel said:
Hi there,
I think your car requires the newest bluetooth protocol (4.0), something that is primarily hardware based.
I could be (and hopefully am) wrong here, but the only way to find out is to do a ROM walkabout.
ICS is out right off the bat, as bluetooth was borked in that version (IIRC). You'll need to upgrade to that in the process anyway, as CWM for this device doesn't like drastic changes.
I am biased, but I would try CarbonROM 4.4.4 (the latest, unofficial build) or at the very least CM 10.1. The former would have the best chance of support (being latest firmware available), but it may be overkill for your situation (newer versions = harder on battery life).
So I would try CM 10.1 after stepping up to ICS (having done a full nandroid before all this), and if the car still refuses to connect, try Carbon. Then you may be able to prove me wrong.
Hope this helps.
Sent from my MeMO Pad 8"
Click to expand...
Click to collapse
Thanks very much for your reply.
Being a hardware issue is something I have considered, but not knowing enough to understand why it might work virtually flawlessly for phone and audio streaming in the car, I was hopeful the hardware would support additional Bluetooth profiles, that are added with a new ROM. But then again, I would not be surprised to do the walkabout and end up at the store for a new phone in the end anyway.
I will be looking for an ICS ROM, but it sounds like it doesn't matter which one I use because I won't be staying there?
I have done, and will do again, backups, but I am little unclear on a few things. CWM is on the phone, but I actually used ROM Manager for the flashing I've done. Are they the same thing? It uses CWM. Also, I've seen various references to making sure the phones identity (not sure that's the right term) is saved, and I take that to mean that after flashing the phone may no longer be able to access phone carrier service. Is that a real possibility? And, is it necessary to remove the SD card? Thanks again.
mainwheel said:
Thanks very much for your reply.
Being a hardware issue is something I have considered, but not knowing enough to understand why it might work virtually flawlessly for phone and audio streaming in the car, I was hopeful the hardware would support additional Bluetooth profiles, that are added with a new ROM. But then again, I would not be surprised to do the walkabout and end up at the store for a new phone in the end anyway.
I will be looking for an ICS ROM, but it sounds like it doesn't matter which one I use because I won't be staying there?
I have done, and will do again, backups, but I am little unclear on a few things. CWM is on the phone, but I actually used ROM Manager for the flashing I've done. Are they the same thing? It uses CWM. Also, I've seen various references to making sure the phones identity (not sure that's the right term) is saved, and I take that to mean that after flashing the phone may no longer be able to access phone carrier service. Is that a real possibility? And, is it necessary to remove the SD card? Thanks again.
Click to expand...
Click to collapse
I would recommend Entropy's ICS build, which I have a mirror of, accessed from my signature link.
ROM manager loads CWM (same author, ROM manager is IIRC just the Play Store delivery mechanism for CWM), so once you have CWM, you are good to go for your walkabout.
Yes, you want to make sure to back up your IMEI information first, because that stuff can get lost, which if lost, will deny you access to your carrier. There is a way to retrieve it if lost on this device, but an ounce of prevention is worth a pound of cure. Check the CM10.x thread on instructions how to flash (with links to the IMEI backup).
No need to remove the SD card, but if you don't need it for a flash, I would remove it anyway (or back up it's contents to your PC first - in case in the unlikely event - I'm paranoid about those things - CWM goes a little liberal with the factory reset).
Hope this helps.
joel.maxuel said:
I would recommend Entropy's ICS build, which I have a mirror of, accessed from my signature link.
ROM manager loads CWM (same author, ROM manager is IIRC just the Play Store delivery mechanism for CWM), so once you have CWM, you are good to go for your walkabout.
Yes, you want to make sure to back up your IMEI information first, because that stuff can get lost, which if lost, will deny you access to your carrier. There is a way to retrieve it if lost on this device, but an ounce of prevention is worth a pound of cure. Check the CM10.x thread on instructions how to flash (with links to the IMEI backup).
No need to remove the SD card, but if you don't need it for a flash, I would remove it anyway (or back up it's contents to your PC first - in case in the unlikely event - I'm paranoid about those things - CWM goes a little liberal with the factory reset).
Hope this helps.
Click to expand...
Click to collapse
Thanks Joel. I have now installed Entropy. Don't know whether everything else is working, but I do know that I can not connect to my wifi. Keep getting "authentication problem." I see that it is a known problem, but I'm not finding a solution. Not quite ready to go the next step (time constraint), so I'm hoping there is a fix, or at least a workaround. Kind of a bummer not having access to wifi. Any suggestions?
mainwheel said:
Thanks Joel. I have now installed Entropy. Don't know whether everything else is working, but I do know that I can not connect to my wifi. Keep getting "authentication problem." I see that it is a known problem, but I'm not finding a solution. Not quite ready to go the next step (time constraint), so I'm hoping there is a fix, or at least a workaround. Kind of a bummer not having access to wifi. Any suggestions?
Click to expand...
Click to collapse
I wouldn't worry about it. Entropy is just a step-through (because BlueTooth is broken as well) and there are other ways to get the other ROMs onto the device (if they are not there already) such as adb push or MicroSD + Built-in Filemanager App. Higher versions will have that fixed anyway.
Downloadable CM 10.1
joel.maxuel said:
I wouldn't worry about it. Entropy is just a step-through (because BlueTooth is broken as well) and there are other ways to get the other ROMs onto the device (if they are not there already) such as adb push or MicroSD + Built-in Filemanager App. Higher versions will have that fixed anyway.
Click to expand...
Click to collapse
Thanks again Joel.
I don't have a lot on my data plan, so I rely on wifi quite a bit. But for now, not a big deal and will try to upgrade asap. No issues with getting the file to the phone, but I am having some difficulty finding a downloadable CM 10.1 (actually it is 10.2), and a gapps file for it. The XDA forum I went to doesn't work and if I go to the mirror site it tells me the file is too big or something and I'm not able to download. Haven't scoured the internet looking for it, thought I might save some time if you know where I can get it. If not, I'm thinking just try the Carbon ROM, assuming I can find it. I know you recommend CM first. George
mainwheel said:
Thanks again Joel.
I don't have a lot on my data plan, so I rely on wifi quite a bit. But for now, not a big deal and will try to upgrade asap. No issues with getting the file to the phone, but I am having some difficulty finding a downloadable CM 10.1 (actually it is 10.2), and a gapps file for it. The XDA forum I went to doesn't work and if I go to the mirror site it tells me the file is too big or something and I'm not able to download. Haven't scoured the internet looking for it, thought I might save some time if you know where I can get it. If not, I'm thinking just try the Carbon ROM, assuming I can find it. I know you recommend CM first. George
Click to expand...
Click to collapse
Hi George,
My signature link contains the CM10.1 ROM (and Gapps) as well. I had problems with CM10.2 back in the day (wouldn't install), so I would recommend 10.1 over 10.2.
My Dropbox may be exhausted for the day (sometimes it gets like that) but I may have a copy on well, Copy, that I could send if necessary. Just let me know if you have problems downloading from my mirror first.
joel.maxuel said:
Hi George,
My signature link contains the CM10.1 ROM (and Gapps) as well. I had problems with CM10.2 back in the day (wouldn't install), so I would recommend 10.1 over 10.2.
My Dropbox may be exhausted for the day (sometimes it gets like that) but I may have a copy on well, Copy, that I could send if necessary. Just let me know if you have problems downloading from my mirror first.
Click to expand...
Click to collapse
Joel,
Maybe I'm just missing something. Not having a problem downloading, I'm having a problem finding the files to download.
The only link I find (it's the link that says something about development files?) takes me to the XDA CM 10.2 forum where I wasn't able to get it. Maybe I'm just missing it in your signature links. I see references to Carbon and other stuff. George
mainwheel said:
Joel,
Maybe I'm just missing something. Not having a problem downloading, I'm having a problem finding the files to download.
The only link I find (it's the link that says something about development files?) takes me to the XDA CM 10.2 forum where I wasn't able to get it. Maybe I'm just missing it in your signature links. I see references to Carbon and other stuff. George
Click to expand...
Click to collapse
George,
Each list item has two links....the original source item (thread), and then the dropbox download link (labelled "download") so you are looking for this.
Hope this helps.
joel.maxuel said:
George,
Each list item has two links....the original source item (thread), and then the dropbox download link (labelled "download") so you are looking for this.
Hope this helps.
Click to expand...
Click to collapse
DOH! Didn't even see that there were two links. Sorry about that. Think I've got everything now, and can find it again if I need it. Now to do the work. Thanks for your help. Will let you know how it goes. George
mainwheel said:
DOH! Didn't even see that there were two links. Sorry about that. Think I've got everything now, and can find it again if I need it. Now to do the work. Thanks for your help. Will let you know how it goes. George
Click to expand...
Click to collapse
Hi Joel,
Got it upgraded to CM 10.1. All seems well. Unfortunately, it did not fix the compatibility problem with messaging and our car, as you correctly suggested might happen. Is there anything about Carbon that gives you reason to think it might work? As I said in the original post, I made some assumptions about the problem (Bluetooth MAP profile based on some reading), and that might be a software fix. But, of course, I may be completely wrong about it. Thanks. George
mainwheel said:
Hi Joel,
Got it upgraded to CM 10.1. All seems well. Unfortunately, it did not fix the compatibility problem with messaging and our car, as you correctly suggested might happen. Is there anything about Carbon that gives you reason to think it might work? As I said in the original post, I made some assumptions about the problem (Bluetooth MAP profile based on some reading), and that might be a software fix. But, of course, I may be completely wrong about it. Thanks. George
Click to expand...
Click to collapse
Hello again George,
Nothing about Carbon in general, but KitKat, yes...
Android 4.4 support for two new Bluetooth profiles to let apps support a broader range of low-power and media interactions. Bluetooth HID over GATT (HOGP) gives apps a low-latency link with low-power peripheral devices such as mice, joysticks, and keyboards. Bluetooth MAP lets your apps exchange messages with a nearby device, for example an automotive terminal for handsfree use or another mobile device. As an extension to Bluetooth AVRCP 1.3, users can now set absolute volume on the system from their Bluetooth devices.
Click to expand...
Click to collapse
Gone this far, might as well give it a shot. :fingers-crossed:
joel.maxuel said:
Hello again George,
Nothing about Carbon in general, but KitKat, yes...
Gone this far, might as well give it a shot. :fingers-crossed:
Click to expand...
Click to collapse
I guess it couldn't stay easy. My attempt to install CARBON (two different download versions) failed, I am getting an error I don't understand.
First, when I go to wipe dalvik I get E: unknown volume for .... (/sd-ext) I can not read it very well because of the background image. Where I put the ... it looks like path.
Then
This ROM uses an imcompatible partition layout
Your /data will be wiped upon installation
Run this update.zip again to confirm install
Then
assert failed: run_program("/tmp/updater.sh") == 0
E:Error in /sdcard/CARBON-KK-NIGHTLY-20141102-0915-infuse4g.zip
(Status 7)
Installation aborted.
Any ideas what this means? I can reload CM 10.1, so I am not bricked or anything. I appreciate your help.
I did try to get some help from the IRC forum at CARBON, but haven't gotten any replies.
George
mainwheel said:
I guess it couldn't stay easy. My attempt to install CARBON (two different download versions) failed, I am getting an error I don't understand.
First, when I go to wipe dalvik I get E: unknown volume for .... (/sd-ext) I can not read it very well because of the background image. Where I put the ... it looks like path.
Then
This ROM uses an imcompatible partition layout
Your /data will be wiped upon installation
Run this update.zip again to confirm install
Then
assert failed: run_program("/tmp/updater.sh") == 0
E:Error in /sdcard/CARBON-KK-NIGHTLY-20141102-0915-infuse4g.zip
(Status 7)
Installation aborted.
Any ideas what this means? I can reload CM 10.1, so I am not bricked or anything. I appreciate your help.
I did try to get some help from the IRC forum at CARBON, but haven't gotten any replies.
George
Click to expand...
Click to collapse
There's this tutorial (section 27), but what may be happening is a drastic change in ROM's for CWM (which falls under what status 7 error scope - along with corrupted IMEI, etc).
My upgrade path long ago (coincidentally) was Stock -> CM9 -> CM10.1 -> Beanstalk 4.4.2 -> CarbonROM 4.4.4.
You can, however cheat, by disabling voodoo lagfix in CWM settings. Otherwise, you may need to find the oldest CarbonROM Kitkat you can grab (4.4.2), to make that last (small) jump to 4.4.4.
If still doesn't work, roll back to CM10.1, make sure everything is order (including calling), and try again.
joel.maxuel said:
There's this tutorial (section 27), but what may be happening is a drastic change in ROM's for CWM (which falls under what status 7 error scope - along with corrupted IMEI, etc).
My upgrade path long ago (coincidentally) was Stock -> CM9 -> CM10.1 -> Beanstalk 4.4.2 -> CarbonROM 4.4.4.
You can, however cheat, by disabling voodoo lagfix in CWM settings. Otherwise, you may need to find the oldest CarbonROM Kitkat you can grab (4.4.2), to make that last (small) jump to 4.4.4.
If still doesn't work, roll back to CM10.1, make sure everything is order (including calling), and try again.
Click to expand...
Click to collapse
Thanks again Joel.
I may have to bag this whole project. Must be a little late doing this. Too much time and trouble searching for files that can't be downloaded. I could not find an early CarbonROM KitKat to download. I could not find a BeanStalk to download. I find links that point to a defunct website. I did finally find a CM11 which I did download, but I did not see a gapps file to go with it, unless I can use any 4.4 gapps. Also, when I run CWM there is no reference to lagfix. I appreciate all the help, but I don't want to take any more of your time. George
mainwheel said:
Thanks again Joel.
I may have to bag this whole project. Must be a little late doing this. Too much time and trouble searching for files that can't be downloaded. I could not find an early CarbonROM KitKat to download. I could not find a BeanStalk to download. I find links that point to a defunct website. I did finally find a CM11 which I did download, but I did not see a gapps file to go with it, unless I can use any 4.4 gapps. Also, when I run CWM there is no reference to lagfix. I appreciate all the help, but I don't want to take any more of your time. George
Click to expand...
Click to collapse
Hi George,
Any 4.4.2 Gapps will work. I am uploading one right now (along with older Beanstalk and CM11)...
https://www.dropbox.com/sh/smohomrdx0oqn76/AACfrsgXTEHhDmVtwEWj6EA5a?dl=0
...it may take an hour for files to appear, so keep posted, if still interested.
Also, another way to disable voodoo lagfix (if not found in CWM) is to create a folder on internal storage called Voodoo, and then a folder inside that called disable-lagfix.
Hope this helps.
joel.maxuel said:
Hi George,
Any 4.4.2 Gapps will work. I am uploading one right now (along with older Beanstalk and CM11)...
https://www.dropbox.com/sh/smohomrdx0oqn76/AACfrsgXTEHhDmVtwEWj6EA5a?dl=0
...it may take an hour for files to appear, so keep posted, if still interested.
Also, another way to disable voodoo lagfix (if not found in CWM) is to create a folder on internal storage called Voodoo, and then a folder inside that called disable-lagfix.
Hope this helps.
Click to expand...
Click to collapse
Thanks Joel. I appreciate the help and will try to make some time to install these files. Will let you know. George
joel.maxuel said:
Hi George,
Any 4.4.2 Gapps will work. I am uploading one right now (along with older Beanstalk and CM11)...
https://www.dropbox.com/sh/smohomrdx0oqn76/AACfrsgXTEHhDmVtwEWj6EA5a?dl=0
...it may take an hour for files to appear, so keep posted, if still interested.
Also, another way to disable voodoo lagfix (if not found in CWM) is to create a folder on internal storage called Voodoo, and then a folder inside that called disable-lagfix.
Hope this helps.
Click to expand...
Click to collapse
Hi Joel,
Unfortunately, none of these 4.4.x versions will install, same error. And placing Voodoo/lagfix/ folder doesn't seem to work either, same error. If the problem is the jump to the next version is too great, maybe an earlier version of something, 4.2 or earlier? George