Related
hey guys,
I flashed the "voodooChargeKernel4" tar file win Odin. Then I flashed the CWR recovery through Odin ( i know I ****ed up). It wouldnt boot and was stuck on the samsung screen. I pulled the battery and went back into Odin to reflash the voodoochargekernel again. Now it's stuck on a screen with a phone, a computer and orange triangle.
Well i got the same tar file to flash in Odin by switching USB ports, but now Im still stuck on the samsung screen
crap..i dont know what to do. I used the CWR recovery files from this thread on someone's recommendation: http://forum.xda-developers.com/showthread.php?t=1111486. Now the phone wont turn on at all except download mode and anything I flash says fail.
Odin is flaky you may need to try a different USB port.
If that does not work try to remove the device in device manager and unplugging the phone and plugging it back in to the computer,.
And flash the below package
http://forum.xda-developers.com/show....php?t=1116867
EE4 Stock.
uefcommad said:
Odin is flaky you may need to try a different USB port.
If that does not work try to remove the device in device manager and unplugging the phone and plugging it back in to the computer,.
And flash the below package
http://forum.xda-developers.com/show....php?t=1116867
EE4 Stock.
Click to expand...
Click to collapse
that link didn twork. Do you have another?
Breakthecycle2 said:
that link didn twork. Do you have another?
Click to expand...
Click to collapse
try this
http://forum.xda-developers.com/showthread.php?t=1116867
uefcommad said:
try this
http://forum.xda-developers.com/showthread.php?t=1116867
Click to expand...
Click to collapse
thank but that didnt work either. Its in an endless boot into recovery for some reason.
I had the problem, except mine wasn't going into recovery; it rebooted after every boot animation.
What worked for me was, using Odin, re-flashing the Kernel, unplug the phone, plug the phone in again, and then flashing Altered Beast, then turning the phone on. It didn't work if i tried them one at a time.
after u get the phone in download mde. re-install the battery and then flash via odin.
if your getting bootloop then try in recover to wipe data
uefcommad said:
if your getting bootloop then try in recover to wipe data
Click to expand...
Click to collapse
Yeah did that too. went rigth back into recovery. I just bought and did a **** move by bringing it back to best buy and got a new one.
Breakthecycle2 said:
Yeah did that too. went rigth back into recovery. I just bought and did a **** move by bringing it back to best buy and got a new one.
Click to expand...
Click to collapse
Well, mine's doing the same thing his was, but I'm not able to return mine to Best Buy. Any more ideas?
Grizzld said:
Well, mine's doing the same thing his was, but I'm not able to return mine to Best Buy. Any more ideas?
Click to expand...
Click to collapse
What did you flash exactly?
Breakthecycle2 said:
What did you flash exactly?
Click to expand...
Click to collapse
I flashed Stock Rooted ED1 (downgrade from ED2) from here:
http://forum.xda-developers.com/showthread.php?t=1085190
I'm currently waiting on this to be fixed:
http://rootzwiki.com/showthread.php?481-LEAK-STOCK-ED2-Droid-Charge-FULL-ODIN!
Grizzld said:
I flashed Stock Rooted ED1 (downgrade from ED2) from here:
http://forum.xda-developers.com/showthread.php?t=1085190
I'm currently waiting on this to be fixed:
http://rootzwiki.com/showthread.php?481-LEAK-STOCK-ED2-Droid-Charge-FULL-ODIN!
Click to expand...
Click to collapse
That may not work. I had that DL already.
have you tryed this package?
Stock EE4
http://forum.xda-developers.com/showthread.php?t=1116867
i am running it now
uefcommad said:
have you tryed this package?
Stock EE4
http://forum.xda-developers.com/showthread.php?t=1116867
i am running it now
Click to expand...
Click to collapse
Yup, did that too. That allowed my phone to actually boot, but then I got stuck in recovery.
Okay, so my friend came over today, so I could root/rom his phone. I set it all up, with Odin and everything ready, and when I ran Odin with recovery.tar, it failed. I thought, okay, probably just have to try again. I tried again, and it still fails. It is only soft bricked, but it may as well be hard bricked as I cannot fix it. PLEASE HELP!! I'm really worried about this.
Recovery.tar is to go back to stock. Scroll down here and you can find all the steps to root and install roms. Here
GBGamer said:
Okay, so my friend came over today, so I could root/rom his phone. I set it all up, with Odin and everything ready, and when I ran Odin with recovery.tar, it failed. I thought, okay, probably just have to try again. I tried again, and now it stops at the SetupConnection step. PLEASE HELP!! I'm really worried about this.
Click to expand...
Click to collapse
appdroid said:
Recovery.tar is to go back to stock. Scroll down here and you can find all the steps to root and install roms. Here
Click to expand...
Click to collapse
I did do this, and it failed. I followed these to a dot, and also, recovery is cwm.
Give me link of what you are using to root.
GBGamer said:
I did do this, and it failed. I followed these to a dot, and also, recovery is cwm.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1340526 because i'm going to install a custom ROM.
GBGamer said:
Okay, so my friend came over today, so I could root/rom his phone. I set it all up, with Odin and everything ready, and when I ran Odin with recovery.tar, it failed. I thought, okay, probably just have to try again. I tried again, and now it stops at the SetupConnection step. PLEASE HELP!! I'm really worried about this.
Click to expand...
Click to collapse
Get odin set up with tar, hold both volume buttons on the left side of the pone, while it is turned off (make sure you have usb cable unplugged first) then plug usb cable into the phone, and you should be in download mode.
If you are running 2.3.5 than y don't you use one click root.
GBGamer said:
http://forum.xda-developers.com/showthread.php?t=1340526 because i'm going to install a custom ROM.
Click to expand...
Click to collapse
appdroid said:
If you are running 2.3.5 than y don't you use one click root.
Click to expand...
Click to collapse
He's using 2.3.6, got it yesterday. Okay, I tried restarting the phone, going to recovery, but whenever I try to flash, it fails.
Do you mean going into Dload mode?
GBGamer said:
He's using 2.3.6, got it yesterday. Okay, I tried restarting the phone, going to recovery, but whenever I try to flash, it fails.
Click to expand...
Click to collapse
appdroid said:
Do you mean going into Dload mode?
Click to expand...
Click to collapse
Yea. Ok, it is definitely only soft bricked, but I cannot fix it as I can't actually get Odin to flash.
And thanks for helping me.
Take the battery out and place it back
Hold both Vol up + Vol down, and plug in the USB cable.
Press Vol up to continue to Download Mode.
GBGamer said:
Yea. Ok, it is definitely only soft bricked, but I cannot fix it as I can't actually get Odin to flash.
Click to expand...
Click to collapse
Okay I have done that.
You are doing good. Just relax and give me more detailed information. So its easier for me to see what's going on. now did you get into Dload mode?
GBGamer said:
Okay I have done that.
Click to expand...
Click to collapse
Ok. So I went into download mode, opened up ODIN, and tried flashing CWM. When that failed, I tried again, taking out the battery and turning the phone back on to download mode, reflashing CWM, and it failed again. I then downloaded the complete stock flashable ODIN file.I flashed this, and it also failed. I have tried this multiple times, with different usb cords. I tried reinstalling the drivers, and flashing again. It still says failed.
Ok lets try different way. Just use odin to flash the .zip file aka Superuser thats all.
Install the drivers and make sure the Phone is recognized by your PC.
Rename the downloaded "su-3.0.5-efgh-signed.zip" to "superuser.zip" and put it on your EXTERNAL SD card.
Or place a custom rom on your EXTERNAL SD card.
If you want STOCK rooted then use the superuser.zip,
GBGamer said:
Ok. So I went into download mode, opened up ODIN, and tried flashing CWM. When that failed, I tried again, taking out the battery and turning the phone back on to download mode, reflashing CWM, and it failed again. I then downloaded the complete stock flashable ODIN file.I flashed this, and it also failed. I have tried this multiple times, with different usb cords. I tried reinstalling the drivers, and flashing again. It still says failed.
Click to expand...
Click to collapse
Your signature says tmobile. Is your friends device the samsung i727 skyrocket?
Yes silver its his friends device. Hey he says he can't flash cwm through Odin So i want him to just flash superuser.zip and install/flash CWM through Rom manager. What do you think will it work?
silver03wrx said:
Your signature says tmobile. Is your friends device the samsung i727 skyrocket?
Click to expand...
Click to collapse
appdroid said:
Ok lets try different way. Just use odin to flash the .zip file aka Superuser thats all.
Install the drivers and make sure the Phone is recognized by your PC.
Rename the downloaded "su-3.0.5-efgh-signed.zip" to "superuser.zip" and put it on your EXTERNAL SD card.
Or place a custom rom on your EXTERNAL SD card.
If you want STOCK rooted then use the superuser.zip,
Click to expand...
Click to collapse
You dont use odin to flash the super user zip. You use cwm recovery. If he is not rooted he probobly also does not have cwm recovery.
oops....... So does your rom 2.3.6 do anything for him?
silver03wrx said:
You dont use odin to flash the super user zip. You use cwm recovery. If he is not rooted he probobly also does not have cwm recovery.
Click to expand...
Click to collapse
Please Help!
I'm trying to get cm10 on my verizon s3 via
http://forum.xda-developers.com/showthread.php?t=1788443
I'm rooted, used the emulator to install the k-exec compatible cwm recovery
but when i tried rebooting into recovery i got a"could not do normal boot" "odin mode" screen with the android icon and
"downloading... Do not turn off target!!!"
Its STUCK I've tried battery pulling and turning on with every button combo and nothing it working, even restarting with it plugged into my PC.
How do i get my phone back?
Thank you!!
vivviv said:
Please Help!
I'm trying to get cm10 on my verizon s3 via
http://forum.xda-developers.com/showthread.php?t=1788443
I'm rooted, used the emulator to install the k-exec compatible cwm recovery
but when i tried rebooting into recovery i got a"could not do normal boot" "odin mode" screen with the android icon and
"downloading... Do not turn off target!!!"
Its STUCK I've tried battery pulling and turning on with every button combo and nothing it working, even restarting with it plugged into my PC.
How do i get my phone back?
Thank you!!
Click to expand...
Click to collapse
Connect to odin and flash stock?
Zalithian said:
Connect to odin and flash stock?
Click to expand...
Click to collapse
trying that now but cant find the stock file to flash anywhere
Zalithian said:
Connect to odin and flash stock?
Click to expand...
Click to collapse
^^^this. And if I was you, I'd stay away from CM10. No disrespect but it seems like you don't know what you're doing. CM10 has a lot of issues like MMS, boot loops, losing data, losing IMEI and a rom like that really isn't for the beginner types. Stick to Synergy or Beans rom. They're good
Sent from my SCH-I535 using Tapatalk 2
Zalithian said:
Connect to odin and flash stock?
Click to expand...
Click to collapse
This. I got that when my mind blanked and instead of flashing the CPU Script from CWM I flashed it from EZ-recovery. Hah. Just odin back to stock, tis the only way. Just a soft brick.
EDIT
http://forum.xda-developers.com/showthread.php?t=1762204
Download the proper rooted stock image, and flash it via PDA in Odin.
Vorfidus said:
This. I got that when my mind blanked and instead of flashing the CPU Script from CWM I flashed it from EZ-recovery. Hah. Just odin back to stock, tis the only way. Just a soft brick.
EDIT
http://forum.xda-developers.com/showthread.php?t=1762204
Download the proper rooted stock image, and flash it via PDA in Odin.
Click to expand...
Click to collapse
FIXED! thank you!
vivviv said:
FIXED! thank you!
Click to expand...
Click to collapse
I accidentally flashed it via phone instead of PDA. What should I do now? I'm making stupid mistakes along the way. Sorry guys! I tried redoing it by putting the root66 file through odin via the PDA slot instead. Not working :/
I tried flashing CM9.1 using ROM Manager tonight on my GT-P3113 and it's now stuck on a boot loop. The blue Cyanogen creature comes onscreen with a flashing chest and the background has this electronic blue vortex look. I'm unable to do anything and holding the power button only reboots into the loop. Is there a way to fix this?
KingMotion said:
I tried flashing CM9.1 using ROM Manager tonight on my GT-P3113 and it's now stuck on a boot loop. The blue Cyanogen creature comes onscreen with a flashing chest and the background has this electronic blue vortex look. I'm unable to do anything and holding the power button only reboots into the loop. Is there a way to fix this?
Click to expand...
Click to collapse
Let me think about this. I don;t think you are bricked.
DigitalMD said:
Well first I must chastize you for not read probably the very first post here that warns peple not to use RomManager with these devices.
Click to expand...
Click to collapse
I accept chastization [?]
KingMotion said:
I accept chastization [?]
Click to expand...
Click to collapse
Best thing to try is returning to stock configuration. Do you know how to use ODIN to flash the stock ROM? is this a US Wifi model ?
DigitalMD said:
Best thing to try is returning to stock configuration. Do you know how to use ODIN to flash the stock ROM? is this a US Wifi model ?
Click to expand...
Click to collapse
It is a US WiFi model. I used ODIN to flash recovery but if there are instructions on the site, I'd take those as well.
KingMotion said:
It is a US WiFi model. I used ODIN to flash recovery but if there are instructions on the site, I'd take those as well.
Click to expand...
Click to collapse
If you can still get into CWM, then i would recommend you try flashing this stock ROM which is 4.1.1 JB
http://forum.xda-developers.com/showthread.php?t=1861370
Which version of CWM recovery are you using? Make sure its 6.0.1.9 or higher.
If you prefer to return to stock ICS 4.0.4 you can download the odin stock firmware here
http://www.hotfile.com/dl/170457040/052efe5/P3113UEBLH2_P3113XARBLH2_XAR.zip.html
CM9 is outdated and no longer being supported.
CM10 based ROM are available on the forum, but be careful and follow instructions in the thread exactly.
It is possible to hard brick this device permanently so be careful.
DO NOT DO A FACTORY RESET OR DATA WIPE FROM STOCK RECOVERY
DigitalMD said:
If you can still get into CWM, then i would recommend you try flashing this stock ROM .
http://forum.xda-developers.com/showthread.php?t=1861370
Which version of CWM recovery are you using? Make sure its 6.0.1.9 or higher.
Click to expand...
Click to collapse
I can boot into recovery if that's what you mean. I do believe that was the version of CWM that I installed. I'll go into download mode and flash that one. I need a link to Odin though. I have no idea why I deleted it, and the links I followed were no longer valid.
Nvm. I found an Odin download.
KingMotion said:
I can boot into recovery if that's what you mean. I do believe that was the version of CWM that I installed. I'll go into download mode and flash that one. I need a link to Odin though. I have no idea why I deleted it, and the links I followed were no longer valid.
Click to expand...
Click to collapse
for the 4.1.1 JB rom you can use CWM.
For the stock 4.0.4. ISC use ODIN
http://d-h.st/WuY
DigitalMD said:
for the 4.1.1 JB rom you can use CWM.
For the stock 4.0.4. ISC use ODIN
http://www.mediafire.com/download.php?v7f6vrgruqkwn58
Click to expand...
Click to collapse
As you can tell, I'm a bit of a noob. So I need to boot into recovery for the 4.1.1 then? That is, Power + Volume Up?
KingMotion said:
As you can tell, I'm a bit of a noob. So I need to boot into recovery for the 4.1.1 then? That is, Power + Volume Up?
Click to expand...
Click to collapse
Power + vol up. When you see the samsung logo, release the power but continue to hold vol+up until CWM displays. Make sure you are in CWM, not the stock recovery.
If this doesn't fix the boot problem then ODIN flash the stock ICS from the link I provided.use odin 1.8.5
That would remove any corruption caused by the failed CM9 ROM flash, hopefully.
DigitalMD said:
Power + vol up. When you see the samsung logo, release the power but continue to hold vol+up until CWM displays. Make sure you are in CWM, not the stock recovery.
Click to expand...
Click to collapse
I got into CWM and it's v6.0.2.3. Just waiting for the JB ROM to download so I can load it onto my SD card and then flash.
Thanks for all of your help! :good:
KingMotion said:
Thanks for all of your help! :good:
Click to expand...
Click to collapse
That CWM is fine.,
Good luck, Let us know if you have success..... or not.
CWM flash failed. Going to download the Stock ICS and flash using Odin. After I root again, I'll flash that JB Rom anyway.
KingMotion said:
CWM flash failed. Going to download the Stock ICS and flash using Odin. After I root again, I'll flash that JB Rom anyway.
Click to expand...
Click to collapse
Here's a quick tutorial on flashing odin roms.
ignore the model and rom that doesn't match yours
1. download samsung kies to get the correct driver for gt-p3113
2. download odin3 v.1.85
3. download Stock Firmware
4. install Kies
5. extract Odin3-v1.85.zip
6. extract P3113xxxxxxx.zip until you get file P3113xxxxxxxxxxx1_HOME.tar.md5
7. turn off your tablet
8. enter download mode (press volume up button + power button about 5 seconds)
9. plug the usb cable to your pc and your tablet
10. run Odin3 v1.85.exe
11. check if pc recognize your tablet by seeing ID:COM turn yellow and "Added!!" message in the message box lower left odin window.
12. klik PDA button and put P3113xxxxxxx.tar.md5
13. make sure to uncheck re-partition
14. click start
15. odin processing takes about 5 minutes, wait patiently.
16. if there's a "SUCCEED" in the message box, your tablet will restart
17. wait about 10 minutes, you should get your ICS boot
Flashed stock ICS and.....it works!
Thanks a lot man. That's the first and last time I try to flash from RM. Gonna flash that stripped down JB ROM now though.
I now have JB 4.1.1 and am veery happy. You're a lifesaver.
KingMotion said:
I now have JB 4.1.1 and am veery happy. You're a lifesaver.
Click to expand...
Click to collapse
You are very welcome. Happy Holidays.
I've tried everything that i could find using google. Nothing has worked so far.
My friend has a S6 that was on 5.1.1 with root. It didnt received OTA updates so he tried to flash the new Nougat rom using ODIN. Alas the phone softbricked.
I can access download mode, but doesn't matter what firmware i try ODIN always end up failing. It's either sboot.bin, cm.bin so i think it has something to do with the bootloader? I'm not sure.
Tried to use SmartSwitch too but after it downloads the firmware it gives me an error and says to enter safe mode (????) so that's not working either.
Has anyone have an ideia of what to try next?
Thanks in advance.
M3gNa said:
I've tried everything that i could find using google. Nothing has worked so far.
My friend has a S6 that was on 5.1.1 with root. It didnt received OTA updates so he tried to flash the new Nougat rom using ODIN. Alas the phone softbricked.
I can access download mode, but doesn't matter what firmware i try ODIN always end up failing. It's either sboot.bin, cm.bin so i think it has something to do with the bootloader? I'm not sure.
Tried to use SmartSwitch too but after it downloads the firmware it gives me an error and says to enter safe mode (????) so that's not working either.
Has anyone have an ideia of what to try next?
Thanks in advance.
Click to expand...
Click to collapse
Hold down all the buttens on the phone , it should eventually get to download mode , then flash twrp and then flash a rom and see if it boots that way
hairyfred said:
Hold down all the buttens on the phone , it should eventually get to download mode , then flash twrp and then flash a rom and see if it boots that way
Click to expand...
Click to collapse
Already tried. Touchscreen on TWRP is not responsive.
Do you using latest Odin 3.12.7 and newest Samsung USB Drivers and latest right firmware for your model (the best way to get it is SamFirm)?
Softbricked S6, Only Download mode
Hi,
I'm facing the same issue. Tried multiple firmware from sammobile using latest version of odin. I can access only download mode and when not in download it boots till the samsung logo and goes into bootloop. https://imgur.com/a/9bJnM
tarun1188 said:
Hi,
I'm facing the same issue. Tried multiple firmware from sammobile using latest version of odin. I can access only download mode and when not in download it boots till the samsung logo and goes into bootloop. https://imgur.com/a/9bJnM
Click to expand...
Click to collapse
Flash twrp, flash a rom , should let it boot
hairyfred said:
Flash twrp, flash a rom , should let it boot
Click to expand...
Click to collapse
Touchscreen is not working on TWRP. I'm downloading a Custom ROM and will try to install it trough ADB using TWRP commands. Shot in the dark.
Ended up not working.
Tried PhilZ recovery and I got to flash Global Elite rom but it doesn't boot. Is PhilZ compatible with Nougat roms? What else can I try with this recovery.
hairyfred said:
Flash twrp, flash a rom , should let it boot
Click to expand...
Click to collapse
I flashed TWRP using odin and got "pass" message. But i cannot access recovering mode. I can access only recovery mode and after flashing with stock rom i get the message as "pass" in odin as always but same bootloop.
tarun1188 said:
I flashed TWRP using odin and got "pass" message. But i cannot access recovering mode. I can access only recovery mode and after flashing with stock rom i get the message as "pass" in odin as always but same bootloop.
Click to expand...
Click to collapse
Download right newest firmware for your model, use SamFirm to get it. Then use Odin 3.12.7 with newest Samsung USB Drivers to full-flash stock ROM. Set also "Factory Reset" in Odin then START. If Odin shows you 'pass' then everything comes good.
rifek4 said:
Download right newest firmware for your model, use SamFirm to get it. Then use Odin 3.12.7 with newest Samsung USB Drivers to full-flash stock ROM. Set also "Factory Reset" in Odin then START. If Odin shows you 'pass' then everything comes good.
Click to expand...
Click to collapse
Done that, No change. What else can i try to make this work ?
tarun1188 said:
Done that, No change. What else can i try to make this work ?
Click to expand...
Click to collapse
Did you for sure used right firmware correctly for your model etc? Look HERE, try like that.
How is/was your reactivation lock? On or off. I had problems with odin when it was ON.
Sent from my SM-G925F using Tapatalk
gmajnkek said:
How is/was your reactivation lock? On or off. I had problems with odin when it was ON.
Sent from my SM-G925F using Tapatalk
Click to expand...
Click to collapse
It is OFF. See here => https://imgur.com/a/9bJnM I downloaded the right firmware for model. I'm sure of it now. Used samsung smartswitch to know my csc code using serial number. Still i'm facing the same issue. I'll try flashing it on another pc later today. Also, Should i change any odin setting while flashing ?? Like NAND erase or bootloader update etc
tarun1188 said:
It is OFF. See here => https://imgur.com/a/9bJnM I downloaded the right firmware for model. I'm sure of it now. Used samsung smartswitch to know my csc code using serial number. Still i'm facing the same issue. I'll try flashing it on another pc later today. Also, Should i change any odin setting while flashing ?? Like NAND erase or bootloader update etc
Click to expand...
Click to collapse
Not necessary, just "Factory Reset" and that's it. I don't know why Odin shows you "pass
" and your phone still shows "system status: custom". Looks like Odin didn't flashing correctly.
rifek4 said:
Not necessary, just "Factory Reset" and that's it. I don't know why Odin shows you "pass
" and your phone still shows "system status: custom". Looks like Odin didn't flashing correctly.
Click to expand...
Click to collapse
This was before i flashed using Odin. I tried flashing twrp first and then stock rom. Does this make any difference ?
P.S: I'm not able to access recovery mode, only ODIN is possible.
tarun1188 said:
This was before i flashed using Odin. I tried flashing twrp first and then stock rom. Does this make any difference ?
P.S: I'm not able to access recovery mode, only ODIN is possible.
Click to expand...
Click to collapse
Make photo of bootloader after flashed stock via Odin.
BTW
First TWRP then stock? Why? xD
hairyfred said:
Flash twrp, flash a rom , should let it boot
Click to expand...
Click to collapse
This.
tarun1188 said:
This.
Click to expand...
Click to collapse
Ok, but why stock? If you flashed TWRP then full-wipe and clean install for example Noble ROM. Try like that...
hairyfred said:
Flash twrp, flash a rom , should let it boot
Click to expand...
Click to collapse
rifek4 said:
Ok, but why stock? If you flashed TWRP then full-wipe and clean install for example Noble ROM. Try like that...
Click to expand...
Click to collapse
After i flash TWRP, Odin show 'pass' but i'm not able to access recovery mode. vol up + home + power button.