Related
I did not see any thread for this so opening a new one so its easy to find.
I rooted my phone using gingerbreak and like a wiseazz, loaded a custom recovery image of "recovery-RA-GNM-thunderg-1.2". Although the costom recovery loaded fine, I am stuck with a phone which has only blue and green colors. I loaded one of the custom 2.3 ROMs by Andy and it loaded fine, but still the graphic display is all messed up, only green an blue and some other tinges. When I look at the About phone I see that it says the model number as LG P500 , although mine is LG P506. Any help people??
My wife will kill me. Its her phone!!
why would you flash a P500 ROM to a P506 ? did you make a backup ?
I made a backup of the ROM, but I did not backup the recovery.img.
Can I try NAND restore of the old ROM. I have my doubts if that would work, because as soon as I put the custom recovery in it. It started getting messy colors. But I will try. If any one else has any pointers please let me know.
Also, I ready in one of these posts that Thrive and Phoenix are just variants of Optimus One, architecturally same. Bad decision
Ok. An update. I did a Nandroid backup and I have the ROM which came with the phone. It sucks. But I guess I will have to wait till one of the brainys in here come up with a good "Custom Recovery" and "Custom ROM" for LG Thrive.
I have a LG Optimus T and the LG p500 roms work fine with no problems. I would of expected the same for the att version. I guess you have to wait for one that supports it.
Sent from my LG-P500 using XDA App
More bad news. I thought if I can mix and match boot.img of LG506 with the system.img of P500, I can get away by loading the Custom ROM.
Bad Bad Bad decision. Right now, its in a bricked stage. Basically stuck in something called..fastBoot udc_start()...
Its not getting to recovery mode whatever I do. I wanted to get to recovery so I can restore NAND backup. I can even get to adb so I can start in recovery....
Somebody help please
Can anyone help me. I tried all possible routes to unbrick my phone. It keeps getting wosre and worse. Right now its stuck in "Emergency Mode". I have the NAND backup file with system.img and boot.img, but cant do anything with it since no ADP or customer recovery. I tried to do a KDZ update, but I think i need the v11e_00.kdz file for P506. Can anyone give me some pointers to recver my phone.
I have a thrive as well and I get the weird blue green screen using the unofficial cm7 rom from the optimus dev section. Luckily I back up the phone with rom manager first so now im back to where I started.
edit: Well after your post I decided to try it again... mistake. Now im stuck at the cm7 logo and im not really sure how to fix it...
edit 2: cant load recovery either... ****
I have tried out the custom roms and i get the strange color problem too. It's strange how the cell phone board is P500 but the model is P506. The phone must be different somehow hardware wise. Hmm....
Ok. An update.
I bricked my phone trying to experiment. I sent it out to LG repair and they put in the stock ROM and sent back. I will not be continuing my experiments again
Can any big hearted rooters help the LG thrive owners please..
Do experiments but cautiously
Sent from my LG-P500 using XDA Premium App
I have a similar problem with my phone now. I flashed rom and now my phone gets stuck on boot screen. I can get to recovery. But my backups not there for sum reason.
Edit: I found what was supposed to be tha stock rom for my phone but didnt work. Gets stuck after lg screen goes away. It will go to recovery. Does anyone have a copy of a nand
Backup for a P506 thrive?
I've managed to get myself in the same situation would you happen to recall the LG number you called or have a lead on who I can contact at LG. I will continue to search also. Thanks in advance.
Ok wow. You need to go to WWW.androidcentral.com once there go to the Phoenix/ thrive thread. We have a custom kernel made by joban to run the p500 roms without the color issue. Also have how to threads for rooting, CWM, and flashing.
Running oxygen v1.1 w/ joban kernel,cwm on my LG Phoenix. And its awesome. Fast, great battery
Don't forget to hit the thanks button!
Sorry that it took me forever to get back to this, but just one question. Are the kernels for the Phoenix and Thrive exactly the same?
No issues that i can recall being specific to the kernel.
Question: I have rooted the phone and installed ROM Manager. Set up Rom Manager as Optimus One. Here is the issue: I am able to reboot normally and keep root. But when I select to reboot into recovery from ROM Manager, the phone does a default setup and I'm back to factory default. When I try to get into recovery by using the PWR+Home+Vol up (and vol down at times), I get into fastboot with "udc_start()". Which I'm guessing is normal. What am I missing to get into recovery?
Thanks.
Assuming you have a thrive. You may want to check this out.
http://forums.androidcentral.com/t-lg-phoenix-thrive/138186-how-clock-workrecovery-mod-cwm-6.html
There appears to be a hickup with thrive and CWM.
lg thrive p506 EMERGENCY MODE!
my lg thrive come on and immediately goes into emergency mode. i have been searching for about two weeks for anything that will help me in xda forums, and youtube and phandroid. i cant find anything that conclusively brings the phone out of emergency mode. can anyone direct me to a program or forum that might be of assistance?
need more info. are you on stock unrooted, just rooted, or rooted with custom recovery and rom?
what were you doing when this happened?
^^^^need to know^^^^^^^^^
try this and let me know what you get. hold at same time Home+vol down+power.
Reading the boards I've noticed quite a few people who have possibly bricked their phones by using this horrendous piece of garbage. Leave it to LG. Regardless, I would strongly recommend against using it and either waiting for an OTA update or using xboarder's flashable, rooted update here: http://forum.xda-developers.com/showthread.php?t=1179748 .
As far as I can tell, no one has been able to fix the s/w updater issue, which is leaving phones either with no recovery or unable to boot past recovery/restore ROMs.
This isn't the first time either. Just google "LG Software update bricking phones".
Oh wait, I did: http://www.google.com/search?source...gc.r_pw.&fp=79f73547dc11dcbf&biw=1366&bih=667
For those of you who possibly bricked your phones; hang on, I'm sure some of the great minds on this board will come up with a fix. Unfortunately, I'm not one of them.
ALSO! For those of you who don't know this already -- you MUST restore the stock recovery BEFORE trying to upgrade. That's also been causing problems. Just use NVFlash to restore the stock recovery, THEN upgrade using LG software if you must.
The stock camera app doesn't focus as quickly or have nearly as good quality (unacceptable quality IMO) as the LG app. I use my camera frequently and would not have updated if I knew it would be gone (reason why I didn't flash CM7).
Does anyone know of a way to restore to stock? I installed Nvflash at one point or another...
I was stock rooted and update killed that. No more root. But phone works great so far.
Sent from my LG-P999 using XDA Premium App
Update: I was able to restore Clockwork Mod (or had it from before, didnt check) with NVFlash. Then restored one of my NANDroid backups from before.
Bye bye ****ty LG gingerbread update.
I will agree with you. My phone is now bricked. Stuck on the S/W screen with no sign of ever getting it back. I was stock non rooted. And yes I did it on a win 7 64bit machine. Damn you LG and your ****ty updater.
MuzzRock said:
I will agree with you. My phone is now bricked. Stuck on the S/W screen with no sign of ever getting it back. I was stock non rooted. And yes I did it on a win 7 64bit machine. Damn you LG and your ****ty updater.
Click to expand...
Click to collapse
It come back, I brick it the same way, once's before, if you didn't root, hold the power button and volume up at the same time, or if you did root, uses NVflash or clockwork to recover. And don't recommend using a 64bit OS for any type of programming or flashing, just install VMware player, it uses your CPU virtualization to run a different OS, while in your host OS and it's free, that allow you to run XP on a virtual partition, and use USB devies from host machine. The nice thing is if you mess something up, it won't effect the rest of the machine, and you can run the 32bit XP version of the tool.
Works great on mine. I backed up, used tga gunmans stock restore, replaced with stock recovery, unrooted using super one click. rebooted, installed the update, reflashed to custom recovery with tga gunmans app and installed the rooted version from xboarder56. Time consuming would be my only complaint and I love screwing with this thing so who cares.
Yes, my phone is too bricked by this app. Did any of you that are now bricked get to 4% after the download and during the update process, then windows popped up a dialog and claimed the app was no longer responding? this is what happened to me and boom, now i can't get back. I even tried doing the nandroid restore of the stock rom from CWM. Still can't get out of the S/W updater screen. Is there anyway to reflash the bootloader? I did try a live chat with a LG tech and he wanted me to do a hard reset. which is basicly holding down the vol-down and power button. so i did a nvflash back to stock recovery and tried it. It showed the box and android screen but then rebooted back to the S/W updater screen. So I called Tmobile and they won't do a replacement since i used LG's app. Said I HAD to go through LG to either fix or replace the phone. Called LG and have a RA# to send it in. Unfortunatly I have to pay for shipping there and it could take about a week to get it back. This really blows.
MuzzRock said:
I will agree with you. My phone is now bricked. Stuck on the S/W screen with no sign of ever getting it back. I was stock non rooted. And yes I did it on a win 7 64bit machine. Damn you LG and your ****ty updater.
Click to expand...
Click to collapse
Mine worked fine on a 64bit windows 7 machine. I have not had no issues at all. The update is great (I think). The only problem I have is that the camera on the update sucks.
Here's an APK for the stock camera, but I haven't tried it on the update yet because I'm waiting for my phone to restore. Feel free to be a guinea pig
http://www.mediafire.com/?p9aiay5zofq5c1m
pvtodorov said:
The stock camera app doesn't focus as quickly or have nearly as good quality (unacceptable quality IMO) as the LG app. I use my camera frequently and would not have updated if I knew it would be gone (reason why I didn't flash CM7).
Does anyone know of a way to restore to stock? I installed Nvflash at one point or another...
Click to expand...
Click to collapse
maybe you should have waited all of 30 minutes from when it came out for someone to say that it was the vanilla android camera app? either way, just flash your recovery again and just restore a stock nandroid...
I didnt have any problems on win7 64bit installing via the update tool... follow the freaking directions and stop getting so antsy and messing with things... mine was stuck on the S/W screen for a bit but all i had to do was unplug pull the battery and put it back in and plug back in and the update kept going...
deanp0219 said:
Here's an APK for the stock camera, but I haven't tried it on the update yet because I'm waiting for my phone to restore. Feel free to be a guinea pig
http://www.mediafire.com/?p9aiay5zofq5c1m
Click to expand...
Click to collapse
stock camera does not work. try it already. thanks though.
i tried the LG updater on my win7 machine. let it sit @ 5% for 48mins.
then i tried the KDZ on the win7 machine, it crashed.
got out an old laptop w/ winXP SP3 - tried the KDZ method a few times, the final time it gave me model dll msg not found error 100 times, after that it rebooted the phone into gingerbread.
do it the KDZ method on a winxp computer before you mail these phones! i tried for 2 hrs and finally got it working!
edit: my phone was rooted & stock (no nvflash installed)
JHaste said:
maybe you should have waited all of 30 minutes from when it came out for someone to say that it was the vanilla android camera app? either way, just flash your recovery again and just restore a stock nandroid...
I didnt have any problems on win7 64bit installing via the update tool... follow the freaking directions and stop getting so antsy and messing with things... mine was stuck on the S/W screen for a bit but all i had to do was unplug pull the battery and put it back in and plug back in and the update kept going...
Click to expand...
Click to collapse
just because you had no issues doesn't mean others aren't. relax dude. i'm very adept at upgrading/modifying,recovering what seem to be bricked phones. much experience with haykuro's 1.33 death spl. but my win 7 64 bit machine would not install the update. NO MATTER HOW MANY TIMES I UNPLUGGED ETC. it was stuck on s/w upgrade. i nvflashed recoveries,did nandroid backups. tried everything i know of. different cables/ports....nothing worked. until i installed xp on a spare partition. finally kdx worked on the first try,even after the lg update tool failed on xp.
No one has bricked their phones. NVFlash and your back to life. Mine wouldn't even power on... No display... No boot logo... Nothing.
NVFlash and your good.
Asus Transformer 3.1 pwnd
www.MiiWiiChat.com
www.SnapSiteAdmins.com
player911 said:
No one has bricked their phones. NVFlash and your back to life. Mine wouldn't even power on... No display... No boot logo... Nothing.
NVFlash and your good.
Asus Transformer 3.1 pwnd
www.MiiWiiChat.com
www.SnapSiteAdmins.com
Click to expand...
Click to collapse
my point exactly... nobody really understands what bricking is... the definition of a brick means its literally nothing more than a paperweight... it is IMPOSSIBLE do anything to get it to work because the phone will not respond to anything... the fact that its on the S/W screen means it has life yet and as already pointed out just use NVFlash to breathe life into it...
Mine worked fine on the update with XP Pro
JHaste said:
my point exactly... nobody really understands what bricking is... the definition of a brick means its literally nothing more than a paperweight... it is IMPOSSIBLE do anything to get it to work because the phone will not respond to anything... the fact that its on the S/W screen means it has life yet and as already pointed out just use NVFlash to breathe life into it...
Click to expand...
Click to collapse
How? I have NV flasher and tried to flash to stock and it still sits on the s/w update screen. Please if you know what to do, feel free to pm me or respond here. I am at a loss as to what to do.
chrisdepew said:
How? I have NV flasher and tried to flash to stock and it still sits on the s/w update screen. Please if you know what to do, feel free to pm me or respond here. I am at a loss as to what to do.
Click to expand...
Click to collapse
Take your sd card and hook it to your computer. Create a folder named "clockworkmod". Open that folder and create a folder named "backup". Place TGA Gunman's stock recovery in the folder.On your phone hold down the volume down and start button at the same time. You will then see a new screen, release the buttons. Go to "backup and restore". You navigate using the volume up and down buttons and select with the power button. Choose the back up that you will see there. When it is finished navigate back and choose "wipe data-factory reset". Reboot. Power on and you are back to the day you purchased it. Or download a ROM from the developers section. I liked "Ultimate ROM". Then choose "install zip from sdcard. You are now better than when you purchased it.
I am able to get into CWM recovery but unable to install any OS on the phone. Ive tried installing all sorts of .zip, didnt work. NEED HELP.
It is Wind mobile Canada version of Optimus 2X.
How about a better explanation of "didn't work".
And, specific information about which roms you've tried to flash.
Also how did you flash CWM?
Sent from a Delorean with a flux capacitor in 1985
i bet you he didn't flash it through nvflash correctly or maybe he didnt use nvflash at all.
rapswiller said:
I am able to get into CWM recovery but unable to install any OS on the phone. Ive tried installing all sorts of .zip, didnt work. NEED HELP.
It is Wind mobile Canada version of Optimus 2X.
Click to expand...
Click to collapse
i bet you he didn't flash it through nvflash correctly or maybe he didnt use nvflash at all.
follow this instruction here http://forum.xda-developers.com/showthread.php?t=1056847
I have used NVflash via command prompt on windows XP. when i hold the power+ -volume I see another LG logo( since I'm using the latest version 5 of clockwork mod recovery). I download rome like eagleblood, weaponG2x, WindG2x(some one had posted original android), miuiandroig2x etc. I have been creating .zip of each of them and pasted onto my sd card via mounting sd card from CWM recovery. then installed .zip from sd card and selected each of them but it says INSTALLATION ABORTED before starting. Not able to get any rom installed. Please help.
kdz updater crashes after 100% under download section. it says decompressing necessary files and doesn't respond after 100% and crashes. I've tried win 7 home basic 64 bit, xp professional 32bit.
Does not respond after saying NORMAL MTK UPGRADE START
read the guides/tutorials again
First and foremost I think you need to read ALL the tutorials on here a little more thoroughly, the way you're describing things indicates that you are unfamiliar with the correct process of flashing different roms. "S/W upgrading screen"?? "creating .zip of each of them"?? The issues you're experiencing are almost 100% user error and nothing hardware related.
Having said that, before you start blindly flashing, do a nandroid backup of your stock Wind rom immediately, then and only then proceed to flashing custom roms/kernels. Also, I would double check the nvflash instructions and repeat that process in its entirety, there's really no need to use rom manager at all or have the latest recovery release (from my experience with 5+ Android phones rom manager serves little purpose unless you're on cm nightlies, cwm and some patience is all you need).
Hopefully that didn't sound harsh, I'm honestly trying to help you, but seriously re-read everything then proceed with flashing, and if you're still having issues hopefully you can include more detailed information next time.
PS Weapon + faux's kernel = WIN
Hi, I have a similar problem.. I rooted my phone yesterday and then installed rom manager. When flashing, I chose LG Optimus 2X (which turns out to be P990) instead of the T-Mobile one (which is P999). My phone is the P999 one with Wind as well.
After a few seconds, the phone restarted and got stuck in the loading screen.
After doing a few searches, I nvflashed a stock image, but under phone info, the Model changed from P999 to P990. Problem is, the baseband says unknown and cannot get any signal. I tried KDZ updates as well as trying to restore stock ROMs using CWM Recovery with no success.
The KDZ method doesn't work as it gives an error saying there is a problem with the phone connectivity. Stock restores get stuck in a bootloop.
Does anyone know what I should do?
I have also tried the following :
Booted into CWM Recovery>mount SD card>USB Mount > extracted LG-P999-V10f>backup and restore(in CWM)> restore> YES
It went through and at the end said Restore Complete! but when i reboot I still see the S/W upgrade screen. I tried Factory restore too after restoring the above mentioned RoM
PS:My phone is not rooted and it is Wind mobile Canada LG-P999dw. Incase i need to root it then how am i suppose to do that since i am not able to bypass the Stupid S/W upgrade screen
aceofserenity said:
Hi, I have a similar problem.. I rooted my phone yesterday and then installed rom manager. When flashing, I chose LG Optimus 2X (which turns out to be P990) instead of the T-Mobile one (which is P999). My phone is the P999 one with Wind as well.
After a few seconds, the phone restarted and got stuck in the loading screen.
After doing a few searches, I nvflashed a stock image, but under phone info, the Model changed from P999 to P990. Problem is, the baseband says unknown and cannot get any signal. I tried KDZ updates as well as trying to restore stock ROMs using CWM Recovery with no success.
The KDZ method doesn't work as it gives an error saying there is a problem with the phone connectivity. Stock restores get stuck in a bootloop.
Does anyone know what I should do?
Click to expand...
Click to collapse
You've somehow flashed an Optimus 2X baseband and ROM, so your baseband is messed. There was a couple of users that have done that here already. Try searching for the threads. They got their problem solved.
rapswiller said:
I have also tried the following :
Booted into CWM Recovery>mount SD card>USB Mount > extracted LG-P999-V10f>backup and restore(in CWM)> restore> YES
It went through and at the end said Restore Complete! but when i reboot I still see the S/W upgrade screen. I tried Factory restore too after restoring the above mentioned RoM
PS:My phone is not rooted and it is Wind mobile Canada LG-P999dw. Incase i need to root it then how am i suppose to do that since i am not able to bypass the Stupid S/W upgrade screen
Click to expand...
Click to collapse
Try flashing recovery again with this method
http://forum.xda-developers.com/showthread.php?t=1056847
mr mystery said:
Try flashing recovery again with this method
http://forum.xda-developers.com/showthread.php?t=1056847
Click to expand...
Click to collapse
I have already performed the exact same procedure. I am able to get into CWM recovery. The issue is even after flashing rom it says S/W upgrading please wait. Tried extracting V10f.rar in clockworkmod>backup>V10f and then hit restore from CWMrecovery. should installation complete!. then when i reboot it still says S/w upgrading. Tried Installing .zip files but still the same problem.
rapswiller said:
I have already performed the exact same procedure. I am able to get into CWM recovery. The issue is even after flashing rom it says S/W upgrading please wait. Tried extracting V10f.rar in clockworkmod>backup>V10f and then hit restore from CWMrecovery. should installation complete!. then when i reboot it still says S/w upgrading. Tried Installing .zip files but still the same problem.
Click to expand...
Click to collapse
I don't understand why you are zipping ROM's. They are already zipped and ready to be placed on the root of your card for flashing.
Sent from a Delorean with a flux capacitor in 1985
mr mystery said:
I don't understand why you are zipping ROM's. They are already zipped and ready to be placed on the root of your card for flashing.
Sent from a Delorean with a flux capacitor in 1985
Click to expand...
Click to collapse
I have tried flashing those zipped roms. but still the same s/w upgrading screen. I have not tried zipping them all over again. but Flashing through those zip files didnt help either.
rapswiller said:
I have tried flashing those zipped roms. but still the same s/w upgrading screen. I have not tried zipping them all over again. but Flashing through those zip files didnt help either.
Click to expand...
Click to collapse
Where are you located?
Sent from a Delorean with a flux capacitor in 1985
mr mystery said:
Where are you located?
Sent from a Delorean with a flux capacitor in 1985
Click to expand...
Click to collapse
alberta, canada
mr mystery said:
You've somehow flashed an Optimus 2X baseband and ROM, so your baseband is messed. There was a couple of users that have done that here already. Try searching for the threads. They got their problem solved.
Click to expand...
Click to collapse
I have tried to no avail. All the users that have had that problem seemingly stopped posting, and don't reply :/ Can anyone find links? I need to fix my partitions through nvflash I think.
My phone is LGP999dw v11H. Wind mobile, canada.
PLEASE HELP. stuck at s/w upgrade please wait screen since 1 week. tried Nvflash. able to get into cvm recovery. tried restore with stock rom, showed installation complete but still the same s/w upgrade screen. tried installing roms with choose zip from sd card option, tried almost all roms but most of them show installation aborted and some show installation complete and when i restart i am stuck at the same screen. Ive doing wipe/factory data before installing each and every rom, also wipe dalvik cache.
Please need help
LGP999dw v11H WIND MOBILE CANADA
aceofserenity said:
Hi, I have a similar problem.. I rooted my phone yesterday and then installed rom manager. When flashing, I chose LG Optimus 2X (which turns out to be P990) instead of the T-Mobile one (which is P999). My phone is the P999 one with Wind as well.
After a few seconds, the phone restarted and got stuck in the loading screen.
After doing a few searches, I nvflashed a stock image, but under phone info, the Model changed from P999 to P990. Problem is, the baseband says unknown and cannot get any signal. I tried KDZ updates as well as trying to restore stock ROMs using CWM Recovery with no success.
The KDZ method doesn't work as it gives an error saying there is a problem with the phone connectivity. Stock restores get stuck in a bootloop.
Does anyone know what I should do?
Click to expand...
Click to collapse
aceofserenity said:
I have tried to no avail. All the users that have had that problem seemingly stopped posting, and don't reply :/ Can anyone find links? I need to fix my partitions through nvflash I think.
Click to expand...
Click to collapse
This is totally a misunderstanding for everyone. T-mobile got a specific branded version called the G2X (in the usa) but the rest of the world got Optimus 2x. I hate when G2X owners frown upon Optimus users that have questions in the G2X thread & vise versa (though there were none in this thread ). The threads need to be better named to P999 & P990 & these misflashes would not have occured. Not just on this site but the whole damn internet. Let me sum it up for the world lol ... There were 3 versions of the Optimus 2x released... The p990, The P999 & The Tmobile specfic branded G2X which is also a p999. I have a p999 Optimus 2x as stated in my Signature. People need to check their version & goto the appropriate forum, But it doesnt help when you are in the correct forum as a newbie & 10 ppl who actually have no idea what version your Optimus 2x is end up telling to to goto "THE OTHER FORUM" because they're in their own closed little world lol. C'mon guys... u know I love you all!
ANYHOW
I've heard of people using Smartflash (a tool made for the p990 ONLY) to partially unbrick p999's to a working state. Here's a small conversation I found on another site:
"Mrjava65, on Apr 29 2011, 18:48, said:
Is there any update on this?
I was one of (hopefully) many who confused the P990 as the same thing as the Optimus 2 @ or the G2X.
So now Im stuck ...If there was a smartflash for the P999 i could undo all this mess !
Any update would be greatly appreciated.
Thanks
LOOK!
Sorry for not updating this topic previously. I had thought I did so however that was on xda. I was able to reinstall the factory rom from a link provided by a user on the xda forum and is also linked on this forum. Go here to download the rom http://www.fileserve.com/file/cwSGYn2/BIN_LGP999AT-01-V10f-310-260-MAR-27-2011+0.zip. You'll need the smartflash tool for the LP9990 to flash the bin files. I was only able to successfully flash the AP.bin, I believe Paul is working on getting a working baseband. The phone will be restored to factory settings after flashing the AP.bin with full functionality. I noticed the baseband is weak and searching for networks does give errors occasionally so we'll be patiently awaiting an update to solve this issue. Albeit your phone will be functional enough to satisfy you till then. If you need any help with the steps just reply in this thread"
*****UPDATE***** : Try reading this link: http://forum.xda-developers.com/showthread.php?t=1226795 seems like this 1 would be your best bet rather than the above!
Now I don't know if this will work but it appears to be the only option u have. AGAIN Smartflash is a tool for the p990 ONLY & I suggest u only use that method if the second method (second link above) does not work. The KDZ method was crashing for me too when I was trying to update to T-mobile GB OTA update stock but I found that skipping the part that says "Read Phone Information" helped me get past any freezing/app crashing. If you are have connectivity issues w KDZ then make sure you downloaded the correct driver from the LG website for the correct version of windows.
Please update us & let us all know if it remains a brick or if you worked out your problem.
-Dave
I tried to update my G2x yesterday via the LG updater tool. Long story short, it froze on the S/W Updating screen and neither T-Mo or LG support could assist in getting it fixed.
I read that it was pretty hard to brick the G2x so I decided to give it an all out effort to resurrect it, especially after the T-Mobile tier two tech support told me there was nothing that could be done, if what he had tried didn't work, the phone was toast. I am just a woman who is more technical than the average woman my age, but I don't mod my phones much in general. I tweak.
I will list what all I have tried, as much in order as I can recall since starting this Friday at noon, don't laugh! (oh the phone is currently working, only 3g and with this Wind ancient looking version)
Flashed CWM on phone (tried all versions at some point in the process)
Totally cleared phone
Tried KDZ_FW_UPD_EN.exe to flash V21E_00 and V21Y_00 Neither would work
Flashed Cyanogenmod 7.1.0.1 Worked, looked beautiful, wifi but no cell service, no baseband, no IMEI
Flashed kdz WIND V11h - everything working but only at 3g
I thought if I got back to something that would put back in a baseband and my IMEI, I could find my way back to the most current update. I can't seem to flash anything new though.
I've tried this :http://forum.xda-developers.com/newthread.php?do=newthread&f=1149
and this : http://forum.xda-developers.com/showthread.php?p=25321356
Both awesome and helpful posts but I can't get anything other than this V11h!!
Help! And thanks! And I am sorry if this seems ridiculously easy, I think my brain quit working about 6 hours ago!
Oh, my question is, how do I go about getting it at least back to where it was? (Never updated from stock, March of 2011)
Model Number
LG-P999
Android version
2.2.2
Baseband version
M6600A-SCAUTNZ-2.0.9720T 1[JUN 05
2011 04:00:00] MP:TRULGE_08.09.02R_MDM
Kernel version
2.6.32.9
Build number
FRG83G
Software Version
LG-P999-AWC-V11h
I'm by no means an expert -- an advanced amateur, maybe -- but I'll do my best.
What exactly were you trying to update when you bricked the phone? You said you were using the LG updater tool, but what exactly were you trying to do? Was your phone already rooted prior to the attempted update? Had you made any modifications to your phone or were you running stock? That may help us get to the root of your problem.
Are you still able to get into the S/W update screen using the directions in the PDF you attached? (Ie: if you remove the battery, hold both volume buttons, and then plug in the USB, does your phone turn on and go into software update mode?) If you can get it into this mode, you should be able to flash the stock TMobile ROM using NVFlasher as in this thread:
http://forum.xda-developers.com/showthread.php?t=1056847
This may get you back to step one, and you can try again. Or maybe at that point, someone more knowledgeable will come around with better advice.
Good luck.
Thanks for your quick reply!
I was trying to uh...update to 2.3.4 Gingerbread to hopefully help resolve some minor but longstanding issues I had had with my phone. Mainly, the random reboot and powering off I was really getting sick of.
My phone was not rooted prior to this. I was running stock.
Yes, I can still get into the S/W updater screen following the instructions in the .pdf I posted.
And funny you should post this thread: http://forum.xda-developers.com/show....php?t=1056847
That is where I originally started when my phone first froze. I have tried to flash to stock using the NV flasher right before I posted the original question. It didn't do a thing and that's when I threw my hands up and decided I needed help!
Rudds1972 said:
That is where I originally started when my phone first froze. I have tried to flash to stock using the NV flasher right before I posted the original question. It didn't do a thing and that's when I threw my hands up and decided I needed help!
Click to expand...
Click to collapse
heh... I can totally relate to throwing your hands up. I just started tinkering with my phone a couple of months ago, and the first night, I spent from 10:00pm until about 5:00am just trying to get Cyanogenmod installed. It was frustrating, but after a lot of reading and re-trying, I finally got it to work.
Okay, when you run NVFlasher, do you get any messages at all? Once you click one of the buttons to flash the phone, I believe a DOS window should popup showing you the status of the flash, whether there are errors while flashing or if it completed successfully. If there are errors, be sure you have the proper APX driver installed, which should be included with the NVFlasher package. What OS are you using on your PC? Windows XP? 7? When you have the phone plugged into the USB and the S/W update screen is showing, you should see "'NVIDIA USB Boot-recovery" listed in your windows device manager.
lol...10pm to 5am eh? Sounds like me, I was (sounds crazy) noon Friday until 2am Sat and started up again around 9am and well...here I sit at 3 am my time, with a few breaks thrown in!
When I run NV flasher, it all goes smoothly. It looks totally complete, no errors. And I am familiar with the errors, the first few hours I had nothing but errors and dead ends. I have the proper APX driver for sure, I thankfully, run XP on this computer. And yes to the "'NVIDIA USB Boot-recovery" listed in your windows device manager. "
Scratching your head like me? I don't want to do Cyanogenmod again, which is what I am tempted to do, thinking now that I have the baseband back, the cell phone service would work. I really just want my phone back the way it was, albeit, updated..ok, so not exactly the way it was!
Currently on phone, so no links. But in other lg device forum on xda there is the "offline updater method" of kdz flashing. It tricks lg updater into using a custom kdz and not to check online. Look for v21y.kdz and use that. Its 2.3.4.
If you can get it working with the old wind mobile rom all you have to do is use the official lg tool from their website and it will update to the latest version for you I had the same problems you are talking about and the only thing I could get to work was the lg offline update tool and flashing the old wind mobile rom after i got that working just went to lg and used their program and it updated me to new baseband an 2.3.4.
http://forum.xda-developers.com/showthread.php?p=25116859
This is what you will have to do. It took me a while to figure it out. But when you have the programs and files you need all downloaded and setup it works without being online. It worked for me once I figured it out. I had to read it a few times and do some searching for all the files but they are out there. If you do not find them via this site Google it. Good luck.
Sent from my LG-P999 using xda premium
Done! Thank you all!!
Rudds1972 said:
Done! Thank you all!!
Click to expand...
Click to collapse
Awesome! What finally worked for you?
Hmmm...can I even remember?? My brain is still swimming in downloads and error messages!
I had tried the offline updater earlier, but the "Automatic Offline Procedure.vbs" file never would load, I kept getting an error on line 25. I downloaded it all again from other links, and this time I thought it would go through but I kept getting an error at line 70 something.
I finally read "instruction.docx" (the steps that the vbs file was going to have me follow) lol
I turned the windows enabler to the ON position.
I also disabled my LG modem first as I had read that on the .pdf file I posted earlier and it had allowed me to get Wind on there.
I disabled my firewall and anti virus temporarily also.
I opened the UpTestEX_mod2_marwin.exe set it to "3GQCT" and "EMERGENCY" and chose the V21y kdz
I hit "Normal web upgrade test"
Then start upgrade or something and the LG updater tool opened, it found my phone, I think I pressed Start upgrade or whatever again, waited, held my breath too long, passed out, woke up VOILA! DONE!
That is a VERY rough translation of what I did, I have had so many trial and error attempts and variations of settings, files etc, that I don't know what really finally worked! But thank you for your encouragement last night, because I was really about to give up for good (thus the last ditch "when all else fails ASK for help" post) and throw not only my hands up, but the phone across the room!
Now I am finally getting around to re loading my apps and all my settings, ringtones, etc etc etc. I don't know if I now love or hate my G2x!
Thanks to everyone for their replies! And everyone else who posts here and helps so many novices like me!
Glad to hear your back up and running.
Sent from my LG-P999 using xda premium
No Luck
I have literally tried everything I could possibly think of to get v11h updated to v21e or even v21y and nothing is working for me. I am stuck at the part where the phone begins to update, but disconnects at param(5) and then fails after that. I have tried every method and tutorial that I could find and I am still searching. Any help would be most appreciated. Thanks!
Zachariah_Apo said:
I have literally tried everything I could possibly think of to get v11h updated to v21e or even v21y and nothing is working for me. I am stuck at the part where the phone begins to update, but disconnects at param(5) and then fails after that. I have tried every method and tutorial that I could find and I am still searching. Any help would be most appreciated. Thanks!
Click to expand...
Click to collapse
Go to my post and follow the instructions:
http://forum.xda-developers.com/showthread.php?t=1601918
I haven't tried it yet but as soon as I do I'll reply back and tell you the results thank you.
On a side note I got tired of the g2x plague and bought a new phone hahaha I still want to fix my g2x though...
Sent from my SAMSUNG-SGH-T989 using XDA
Does v21y work on wind mobile Canada? Having major connection issues and thinking I'll run the kdz method with v21y to see if that fixes things. Gonna do it tonight so if any kind soul sees this post and know the answer could you pm me please. A big thanks in advance
kylereid said:
Does v21y work on wind mobile Canada? Having major connection issues and thinking I'll run the kdz method with v21y to see if that fixes things. Gonna do it tonight so if any kind soul sees this post and know the answer could you pm me please. A big thanks in advance
Click to expand...
Click to collapse
It works. Running it now on wind.
tahahawa said:
It works. Running it now on wind.
Click to expand...
Click to collapse
Hello there I need your help Im with wind too and been trying all methods to upgrade to new basbabnd with no luck i dunno if its me or it is hard to do .. can you plz help I followed the instruction using the fake LG upgrade tool and dowloaded the V21Y . KDZ and tried to upgrade and never works
HELLLPPP lol
yoos1980 said:
Hello there I need your help Im with wind too and been trying all methods to upgrade to new basbabnd with no luck i dunno if its me or it is hard to do .. can you plz help I followed the instruction using the fake LG upgrade tool and dowloaded the V21Y . KDZ and tried to upgrade and never works
HELLLPPP lol
Click to expand...
Click to collapse
I ended up buying a new phone cause I couldn't figure it out. I've tried every method with no luck. The phone just doesn't want to take the update for whatever reason. Other G2x I've tried worked but for some reason not the one I own. Hahaha
Try these links see if you can figure something out. http://forum.xda-developers.com/showthread.php?t=1339272 http://forum.xda-developers.com/showthread.php?t=1619932
Sent from my SAMSUNG-SGH-T989 using xda premium
No luck installing the March 2012 baseband
Rudds1972 said:
Hmmm...can I even remember?? My brain is still swimming in downloads and error messages!
I had tried the offline updater earlier, but the "Automatic Offline Procedure.vbs" file never would load, I kept getting an error on line 25. I downloaded it all again from other links, and this time I thought it would go through but I kept getting an error at line 70 something.
I finally read "instruction.docx" (the steps that the vbs file was going to have me follow) lol
I turned the windows enabler to the ON position.
I also disabled my LG modem first as I had read that on the .pdf file I posted earlier and it had allowed me to get Wind on there.
I disabled my firewall and anti virus temporarily also.
I opened the UpTestEX_mod2_marwin.exe set it to "3GQCT" and "EMERGENCY" and chose the V21y kdz
I hit "Normal web upgrade test"
Then start upgrade or something and the LG updater tool opened, it found my phone, I think I pressed Start upgrade or whatever again, waited, held my breath too long, passed out, woke up VOILA! DONE!
....
Click to expand...
Click to collapse
What does "disabling the LG modem" mean?
I have a Wind P999 phone with the V11h base band. Of course, the LG updater tool says that I have the latest baseband.
I tried updating using the KDZ tool but that did not work. for me.
I tried pushing a T-mobile Stock Rom too. It did not updated the baseband. LG tool still says I have the latest update.
I have also tried the hack of using the LG Updated with a local shttp server. But even then, when I pressed the "Normal web upgrade test" and "Start update" nothing happens.
Am I supposed to get some feedback while the upgrade happens? How long does this process take?
I am using Window 7 Ultimate 64-bit. All antivirus disabled.
Anything else I could try?
BTW, I have been able to revive a bricked p999 T-Mobile phone that I got from Ebay. it has the stock T-MObile Rom with the March 2012 baseband and software version v21y. This Wind phone is just testing me
[Verizon LF Optimus Zone 3 (VS425PP)] Bought The Phone From Fry's Electronics For $20. Rooted It Using NewKingrootV4.95 Then Used supersume To Clean Up Kingroot & Install SuperSU. Everything Was Going Great Til I Went A "WEE" Bit Overboard And Started Removing/Freezing Apps With Titanium Backup. Now Stuck With "Security Error" [Authentication Fail #9] [Modified] Everytime I Boot Up! I Can Get Onto The Firmware Update Screen [In Red Letters Near Bottom "MODIFIED"], But Can't Get My Windows 10 x64 Computer To Recognize It. Gives Me A Code 10... Anyone Have Any Fixes.. I've Tried The VZW Assistant. The LG Assistant. With No Avail.. Any Help Unbricking Would Be Greatly Appreciated.
TY In Advance!
Happened to me yesterday with same 'fail #9' error so sent into LG today for warranty service - hope they fix it!
Did you ever find a way to fix it?
syckman said:
Happened to me yesterday with same 'fail #9' error so sent into LG today for warranty service - hope they fix it!
Did you ever find a way to fix it?
Click to expand...
Click to collapse
No Fixes Yet. Tried Hooking Up To A Windows 7 Machine. It Keeps Switching Between the LG Drivers & VZW Drivers For The Phone.. Going to try using only LG Drivers. Be Back with hopeful results
Just wanted to update that I received phone back from LG all fixed.