First off thanx to flak0, Don and a few others that were into this also jface very nice job, now if u guys want this go over to development u know where to find it, flak0 thread, the lg cam doesn't work on cm. Enjoy it works and it is sweet lol funny how these guys did what LG couldn't do! Oh u will find it on last page op didn't update yet
Flashed and is working great!!! Stock GB then rooted with xboarders Stock GB rom = 100% solid.... at least for me.
How do I root so I can flash it? I updated through kdz for my gingerbread and I have no clue on how to root
Sent from my LG-P999 using XDA App
Bspence415 said:
How do I root so I can flash it? I updated through kdz for my gingerbread and I have no clue on how to root
Sent from my LG-P999 using XDA App
Click to expand...
Click to collapse
nvflash recovery and then flash the camera app but if you want root then flash my build too.
link to nvflash: http://forum.xda-developers.com/showthread.php?t=1056847
link to root: http://forum.xda-developers.com/showthread.php?t=1179748
OK thanks but on the nvflash 3 options
Sent from my LG-P999 using XDA App
Bspence415 said:
OK thanks but on the nvflash 3 options
Sent from my LG-P999 using XDA App
Click to expand...
Click to collapse
ya flash nvflash externel sd clockworkmod recovery
Bspence415 said:
OK thanks but on the nvflash 3 options
Sent from my LG-P999 using XDA App
Click to expand...
Click to collapse
here is a video guide
http://www.youtube.com/watch?v=TozZKt7_JD8&feature=player_embedded
I got an error while flashing...anyone else?
Soldi3rxx said:
I got an error while flashing...anyone else?
Click to expand...
Click to collapse
The error is a spoof, just reboot, it installed.
With that said, anyone else have screen dim when loading the new LG Camera. When I pull battery and reboot the dimmed screen goes away, any other work around, as I hate pulling the damn battery.
Is there an easy way to root the official OTA? I want to remove some bloatware and flash the LG cam. The reason I'm on the stock official is because of the baseband which made a huge difference for me (and as far as I know, there's no other way to get it)
Thanks in advance
gjvah said:
Is there an easy way to root the official OTA? I want to remove some bloatware and flash the LG cam. The reason I'm on the stock official is because of the baseband which made a huge difference for me (and as far as I know, there's no other way to get it)
Thanks in advance
Click to expand...
Click to collapse
ya do it as posted above and flash my build it wont change baseband once you got it its permante
xboarder56 said:
ya do it as posted above and flash my build it wont change baseband once you got it its permante
Click to expand...
Click to collapse
Thanks. Do I use the link you posted, or the 1.1 version you have? (you posted 1.0)
The other one is my tweaked build the v1.0 is completely stock except root
Sent from my LG-P999 using XDA Premium App
xboarder56 said:
The other one is my tweaked build the v1.0 is completely stock except root
Sent from my LG-P999 using XDA Premium App
Click to expand...
Click to collapse
hmm.... It gets stuck at step 5...
See post 4 above. Xboarder provider rooted v21e OTA, you can flash over the LG update. It will preserve the baseband. Then simply flash the LG Camera.
Xboarder also provided a bloat remover.zip that you can apply that removes all the TMobile bloat. It could not be simpler.
NVM. Im too sleepy. NVFlash
gjvah said:
NVM. Im too sleepy. NVFlash
Click to expand...
Click to collapse
Install Clockwork Recovery Mod - Ext
link http://forum.xda-developers.com/showthread.php?t=1056847
You don't need root to install CWR
sarni84 said:
First off thanx to flak0, Don and a few others that were into this also jface very nice job, now if u guys want this go over to development u know where to find it, flak0 thread, the lg cam doesn't work on cm. Enjoy it works and it is sweet lol funny how these guys did what LG couldn't do! Oh u will find it on last page op didn't update yet
Click to expand...
Click to collapse
OP Updated bro thanks..
Xboarder your truly a great guy, I'm gonna give you a thanks when I get home phone premium app apparently doesn't let you give thx ... :unamused:
I never seen you flame when peeps ask a question that can easily be searched.
Props dude you rock.
"If Satan lived in heaven he'd be me... "
If I understand correctly, this will replace the Gingerbread camera with the Froyo camera. It doesn't sound like it's possible to have both on the phone at the same time -- is that right?
The reason I ask is that I'm really much happier with the way the Gingerbread camera works with the flash; the Froyo camera generally overexposed nearby things, but the new camera does a good job of regulating the flash and shutter. I'd like to have all the bells and whistles (that I haven't needed yet but might be handy someday) from the Froyo camera, but I'm not willing to sacrifice the improvement in flash photos (which is something I do pretty often).
Related
...............
You really shouldn't post this in Dev unless it was an official release and checked out. It is already in general where it belongs for this moment.
2nd it has a password, which you didn't even include: sampro.pl , which already makes it quite suspicious.
How do u flash this rom?
Sent from my SAMSUNG-SGH-I997 using XDA App
Don't, that simple. It is NOT a working Infuse 4g ATT Gingerbread rom.
I have a buddy who works for ATT and apparently they're testing it right now, He said possibly within the next week. Believe me or not, your choice. All im telling you is info i have received
You should remove this before too many people try to flash a rom that doesn't work.
Sent from my not-an-iPod
ROM works, its just not the legit Infuse 4G rom. It's a Galaxy S rom
mcdevitt1985 said:
ROM works, its just not the legit Infuse 4G rom. It's a Galaxy S rom
Click to expand...
Click to collapse
stopo saying that. t has hdmi it is an incomplete infuse rom
and as far as i can tell the only thing they didn't finish is the sounds and shutdown animation. it is a legit infuse rom! just not an official one!
-Kevlar- said:
...............
Click to expand...
Click to collapse
wow .
JordanElliott said:
wow .
Click to expand...
Click to collapse
hey are we gonna see an att leak rooted deodexed and zipaligned?
im gonna play with it but im not gonna deodex it. ill just put it up with bloat removed and rooted with a gtg launcher.
Dani897 said:
hey are we gonna see an att leak rooted deodexed and zipaligned?
im gonna play with it but im not gonna deodex it. ill just put it up with bloat removed and rooted with a gtg launcher.
Click to expand...
Click to collapse
What do u mean? Its not a real Rom
Sent from my SAMSUNG-SGH-I997 using xda premium
JordanElliott said:
What do u mean? Its not a real Rom
Sent from my SAMSUNG-SGH-I997 using xda premium
Click to expand...
Click to collapse
IM RUNNING IT RIGHT NOW
what do you mean it's not real? it just hasnt been finalized. it just has the galaxy s shutdown animation, and is missing bootloaders. it is an infuse rom that works nearly perfectly. you can root it with the custom kernels on the forum and flash the stock kernel back to it to get hdmi support back.
maybe people are weird about flashing leaks but this is an infuse rom plain and simple.
Dani897 said:
IM RUNNING IT RIGHT NOW
what do you mean it's not real? it just hasnt been finalized. it just has the galaxy s shutdown animation, and is missing bootloaders. it is an infuse rom that works nearly perfectly. you can root it with the custom kernels on the forum and flash the stock kernel back to it to get hdmi support back.
maybe people are weird about flashing leaks but this is an infuse rom plain and
Is it 2.3.5???
Sent from my SAMSUNG-SGH-I997 using xda premium
Click to expand...
Click to collapse
JordanElliott said:
Dani897 said:
IM RUNNING IT RIGHT NOW
what do you mean it's not real? it just hasnt been finalized. it just has the galaxy s shutdown animation, and is missing bootloaders. it is an infuse rom that works nearly perfectly. you can root it with the custom kernels on the forum and flash the stock kernel back to it to get hdmi support back.
maybe people are weird about flashing leaks but this is an infuse rom plain and
Is it 2.3.5???
Sent from my SAMSUNG-SGH-I997 using xda premium
Click to expand...
Click to collapse
settings and build.prop report that it is
Click to expand...
Click to collapse
Dani897 said:
JordanElliott said:
settings and build.prop report that it is
Click to expand...
Click to collapse
Damn... Go into system/app and.click axt9ime and click view wit root.explorer it should show 2.3.5 in the android manifest
Sent from my SAMSUNG-SGH-I997 using xda premium
Click to expand...
Click to collapse
give me 5 minutes. gotta take care of something
---------- Post added at 11:10 AM ---------- Previous post was at 11:03 AM ----------
yep 2.3.5 /10char
Is anyone else having an issue with the email crashing?
mcdevitt1985 said:
Is anyone else having an issue with the email crashing?
Click to expand...
Click to collapse
havent tested, did you clear data?
EDIT: so far it is working, just logged in. emails updated. i only use gmail, dont know what type of account you put in. might be an issue with data though
Dani897 said:
IM RUNNING IT RIGHT NOW
what do you mean it's not real? it just hasnt been finalized. it just has the galaxy s shutdown animation, and is missing bootloaders. it is an infuse rom that works nearly perfectly. you can root it with the custom kernels on the forum and flash the stock kernel back to it to get hdmi support back.
maybe people are weird about flashing leaks but this is an infuse rom plain and simple.
Click to expand...
Click to collapse
I don't know why you're being so adamant about this. Encouraging the inexperienced to install an unfinished rom is pretty much begging them to make mistakes and have a hard time.
The guy that posted the original link in General hasn't exactly been a fountain of information.
im not encouraging, just saying what it is. and it is not a galaxy s rom any more than ucke3 is a galaxy s rom. it isn't fake. it isnt for another phone. it isn't complete or official but it is an infuse rom. oh and the camera records @30fps. so it isnt something somebody mashed to gether and changed the build.prop to fool us either.
Haven't found much support on this issue, been trying using super one click, I get to stage 7 then it says waiting for phone and hangs...phone is on uckk3...
Sent from my GT-P7500 using xda premium
immor2al said:
Haven't found much support on this issue, been trying using super one click, I get to stage 7 then it says waiting for phone and hangs...phone is on uckk3...
Sent from my GT-P7500 using xda premium
Click to expand...
Click to collapse
Umm... that's probably because it's meant for froyo bro. If you can still boot into the rom that you were in, add the su fix in the Doctorz rom and then flash it. If not, odin to stock, root FROYO, 3e, gtg community kernel. You know the deal.
This phone is a headache....my skyrocket is so much less frustrating!!!
Sent from my GT-P7500 using xda premium
So....you are saying ....there is no root for g.bread?!....why do I see 2.3.6 roms everywhere....or am I not looking at this right?.....my goal was froyo to gingerbread ....then root and flash some better performance roms....(scratching head)
Sent from my GT-P7500 using xda premium
where were you coming from and where to you want to go?
qkster said:
where were you coming from and where to you want to go?
Click to expand...
Click to collapse
I second this notion.
immor2al said:
Haven't found much support on this issue, been trying using super one click, I get to stage 7 then it says waiting for phone and hangs...phone is on uckk3...
Sent from my GT-P7500 using xda premium
Click to expand...
Click to collapse
If you had really researched it you would have read that SOC won't root the kk3 leak.
The GB roms that you see have been modded or ported.
To root the kk3 leak all you have to do is flash entropy's kernel dated 11/02/11.
Truckerglenn said:
If you had really researched it you would have read that SOC won't root the kk3 leak.
The GB roms that you see have been modded or ported.
To root the kk3 leak all you have to do is flash entropy's kernel dated 11/02/11.
Click to expand...
Click to collapse
Yeah, that was what I was gonna suggest.
I wasn't sure if the OP wanted to stay on stock or go from there to another custom ROM.
I must say..you guys around here are brutal..forgive me if my language on the matter is sub-par...i do understand the concept though...i have flashed back to stock and thanks to super thread been working from there with success....There are a ton of threads regarding this device..I treated it mostly like it was similar to a skyrocket.. My mistake..thx
Sent from my SAMSUNG-SGH-I727 using xda premium
Anyone know where i can get camera firmware for this device..would be great..having issues there as well...:-0
Sent from my SAMSUNG-SGH-I727 using xda premium
immor2al said:
I must say..you guys around here are brutal..forgive me if my language on the matter is sub-par...i do understand the concept though...i have flashed back to stock and thanks to super thread been working from there with success....there is a ton of threads on this device..i went at it like it was similar to a skyrocket.. My mistake..thx
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
Brutal?
I thought we were trying till be helpful...
Glad you got it going though
Truckerglenn said:
If you had really researched it you would have read that SOC won't root the kk3 leak.
The GB roms that you see have been modded or ported.
To root the kk3 leak all you have to do is flash entropy's kernel dated 11/02/11.
Click to expand...
Click to collapse
I'm sorry, but I'm a total noob with Samsung. I rooted to a particular ROM, but ran into some issues and had to unbrick the phone. Upon doing so, I selected the kk3 leak and then lost root. I used SOC 2.3.3 to try to reroot, but I got stuck at step 7. So I want to try flashing Entropy's kernel as you mentioned. I'm not sure how to do this though. The kernel is in a CWM .zip format, but Odin reads .tar files. Do I unzip the .zip file and then convert to a .tar file? This didn't seem to work when I initially tried it, but perhaps I did something wrong. Any special settings I need to use? Also, do I just need to reboot after I flash it and I will have root? If not, what else must I do?
Sorry again for my lack of understanding. I've been trying to find an answer for hours and have become a little desperate. Thanks in advance for any and all help.
bloodbath said:
I'm sorry, but I'm a total noob with Samsung. I rooted to a particular ROM, but ran into some issues and had to unbrick the phone. Upon doing so, I selected the kk3 leak and then lost root. I used SOC 2.3.3 to try to reroot, but I got stuck at step 7. So I want to try flashing Entropy's kernel as you mentioned. I'm not sure how to do this though. The kernel is in a CWM .zip format, but Odin reads .tar files. Do I unzip the .zip file and then convert to a .tar file? This didn't seem to work when I initially tried it, but perhaps I did something wrong. Any special settings I need to use? Also, do I just need to reboot after I flash it and I will have root? If not, what else must I do?
Sorry again for my lack of understanding. I've been trying to find an answer for hours and have become a little desperate. Thanks in advance for any and all help.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1437548
YOU CANNOT ROOT GINGERBREAD 2.3.6, can you read that...? Or should I make a new thread like you guys do about rooting this frigging firmware? Hows that for brutal
Sent from my SAMSUNG-SGH-I997 using xda premium
dman3285 said:
YOU CANNOT ROOT GINGERBREAD 2.3.6, can you read that...? Or should I make a new thread like you guys do about rooting this frigging firmware? Hows that for brutal
Sent from my SAMSUNG-SGH-I997 using xda premium
Click to expand...
Click to collapse
lol. Well another member said "To root the kk3 leak all you have to do is flash entropy's kernel dated 11/02/11." I thought that meant it could be rooted. Sorry for the misunderstanding.
before shell root step 7 it freezes every single time !!!!!!! i cant take this anymore i have to root to run my backup to restore my data . someone please help me root this stupid piece of $%## before i odin its $#$ back to froyo and give up entirely on gingerbread ... biggest headache i had in over 5 years. omg.
what you didnt see the other soc threads????
have fun with your unrootable official rom...
pt5970 said:
before shell root step 7 it freezes every single time !!!!!!! i cant take this anymore i have to root to run my backup to restore my data . someone please help me root this stupid piece of $%## before i odin its $#$ back to froyo and give up entirely on gingerbread ... biggest headache i had in over 5 years. omg.
Click to expand...
Click to collapse
here you go:
http://forum.xda-developers.com/showthread.php?t=1390521
Dani897 said:
what you didnt see the other soc threads????
have fun with your unrootable official rom...
Click to expand...
Click to collapse
only threads i seen was several stating that they had same issues but fixed them and got it working. although they didnt say how. so you telling me you cant root the official rom?
pt5970 said:
only threads i seen was several stating that they had same issues but fixed them and got it working. although they didnt say how. so you telling me you cant root the official rom?
Click to expand...
Click to collapse
You need to use a modified kernel, Stock gingerbread kernel is not rootable doing his modification will screw your video up and you won't have video at all.
Sent from my SAMSUNG-SGH-I997 using xda premium
Axiomkid said:
You need to use a modified kernel, Stock gingerbread kernel is not rootable doing his modification will screw your video up and you won't have video at all.
Sent from my SAMSUNG-SGH-I997 using xda premium
Click to expand...
Click to collapse
Are we waiting on source to drop so kernel can be pulled from it? Or will it still be unrootable then?
Sent from my SAMSUNG-SGH-I997 using xda premium
Sorry but I am too having the above problem. I'm afraid I do not understand about the kernel
Can someone explain? I have been searching for an answer but come up with nothing
Thanks
You would have to flash a rooted kernel with Odin to get root then use the sgs kernel flasher to flash the stock kernel if you want it.
Sent from my SAMSUNG-SGH-I997 using XDA App
Must be something wrong with the phone Odin said PASS but still does not work
Thanks
im putting all the tools needed together in a single package. soc is a thing of the past... i will need time to test it which means flashing the official firmware and whatever.
once everyone has root, dont ask for cwm... that will seriously put me in a bad mood.
qkster said:
here you go:
http://forum.xda-developers.com/showthread.php?t=1390521
Click to expand...
Click to collapse
This is just a rom.. you have to root and get CWM before you can even install this.
jcabbott said:
This is just a rom.. you have to root and get CWM before you can even install this.
Click to expand...
Click to collapse
ok, hit my links (on my signature) both will show where to get the tools you need to accomplish your task at hand....there are Odin packages and one click methods to get Rooted ROM stock if that is what you want....or to put CWM on for custom ROMs
I...used rom manager and flashed rom...then went to the normal LG screen and then to the LG screen with the blue strip behind it and it is stuck there...what should I go back to stock or normal ...
I tried to push old Volume Up and Volume Down at the same time but nothing happens...plz help me out
Press and hold the power key and volume down.
If that does not work then follow http://forum.xda-developers.com/showthread.php?p=24087341 guide to flash clockworkmod recovery the right way.
Sent from my LG-P999 using Tapatalk
Klathmon said:
Press and hold the power key and volume down.
If that does not work then follow http://forum.xda-developers.com/showthread.php?p=24087341 guide to flash clockworkmod recovery the right way.
Sent from my LG-P999 using Tapatalk
Click to expand...
Click to collapse
Seriously, why do people still think that ROM Manager is still a safe method of flashing CWM when so many people have had problems with it?
IRASadPanda said:
Seriously, why do people still think that ROM Manager is still a safe method of flashing CWM when so many people have had problems with it?
Click to expand...
Click to collapse
Cause they don't read.
Sent from my LG-P999 using xda premium
mt3g said:
Cause they don't read.
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
sorry about that...actually english is not my first language...so when i read that i should concentrate every words...
anyways I fixed it thank you so much
wasn't directed drectly at you but in general terms lol, but glad you got it fixed already! What's funny is this person, who is reading things that aren't in his native language, properly rooted and fixed his phone when this thread http://forum.xda-developers.com/showthread.php?t=1588558 the guy started to attempt to root his phone around 5-6 hours ago, and from what he has stated is still not able to get it... Less then an hour for this person lol... AWESOME good job!
mt3g said:
Cause they don't read.
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
mt3g said:
wasn't directed drectly at you but in general terms lol, but glad you got it fixed already! What's funny is this person, who is reading things that aren't in his native language, properly rooted and fixed his phone when this thread http://forum.xda-developers.com/showthread.php?t=1588558 the guy started to attempt to root his phone around 5-6 hours ago, and from what he has stated is still not able to get it... Less then an hour for this person lol... AWESOME good job!
Click to expand...
Click to collapse
^^;;
could you recommend gb rom for me...there are many roms and I have no idea for that...stable, fast and good battery life...hehe plz~~~
miss_h said:
^^;;
could you recommend gb rom for me...there are many roms and I have no idea for that...stable, fast and good battery life...hehe plz~~~
Click to expand...
Click to collapse
If you like stock GB you could try Eaglesblood CM7, very fast and stable.
Sent from Narnia
either eaglesblood CM7 has a lot more customization capabilities. I'd say go for that one
http://forum.xda-developers.com/showthread.php?t=1124522
dont for get to install the Gapps (google applications) it has the sign in screen and google necessities, it'll be in the Original Post.
If you care about using the LG Camera that's been ported over from 2.2, and want to stick with an OTA "official" 2.3 GB ROM, then I'd do WeaponG2x 3.0rc1.
desynch- said:
If you care about using the LG Camera that's been ported over from 2.2, and want to stick with an OTA "official" 2.3 GB ROM, then I'd do WeaponG2x 3.0rc1.
Click to expand...
Click to collapse
You can use the LG camera on CM7, but the CM7 camera is fine for me in good light, and works better in low light with BraviaHack
Sent from Narnia
If you just want something that works go with weapon 2.3.3
But if your like a lot of us, once you start flashing you'll never stop
Sent from my LG-P999 using Tapatalk
Klathmon said:
If you just want something that works go with weapon 2.3.3
But if your like a lot of us, once you start flashing you'll never stop
Sent from my LG-P999 using Tapatalk
Click to expand...
Click to collapse
Too old. Bionix Reloaded>Weapon G2x
Sent from Narnia
Ok I'm looking for somthing simple... And there are tons of UCLB3 leaked roms that have been modded and I just get so much lag on the lock screen - I have used the "Heimdall return to stock UCLB3" which does not have the lag. Tried another ROM via CWM that was "stock" with the daily driver kernel (lagged like hell). CWM to stock kernel with the ROM that was marked stock - still lagged.
I could not for the life of me get the Heimdall one click (above) to root with OneClick or the batch available. So I'm looking for somthing based off UCLB -leaked or the release with not much more then a root on it, And the correct Kernel whihc at this point I have no clue what it should be.
Currently I'm running:
FWV
2.3.6
BBV
I997UCLB3
Kernel
2.6.35.7-I997RUXKG3-CL366622
BN
GIBGERBREAD.UCLB3
I know this may seem easy, but to me this is getting fustrating. I have used so many roms... and the best one with the least lag was the return to stock - which I couldn't root (I have rooted many phones)
Any help would be great, or links/suggestions.
What ROMs did you try? Lag...wow...not on any the roms I've loaded....think your install has something to do with your lag....
Do you see the links in my signature if you're on your pc click those links....do some reading....
..I'm humble enough to say it could be my installs... but it's kinda hard to mess up a CWM flash - I'm clearing everything prior. The majority of the lag is on the unlock screen.
As for Roms.. Serendipity...Revolution... and a few others I'm not sure it it's a rom issue or a kernel issue.
I was just a little thrown off by the one click to factory (in your sig) gave me no lag, but I at least get lag on the unlock on all others.
kermyb123 said:
..I'm humble enough to say it could be my installs... but it's kinda hard to mess up a CWM flash - I'm clearing everything prior. The majority of the lag is on the unlock screen.
As for Roms.. Serendipity...Revolution... and a few others I'm not sure it it's a rom issue or a kernel issue.
I was just a little thrown off by the one click to factory (in your sig) gave me no lag, but I at least get lag on the unlock on all others.
Click to expand...
Click to collapse
*cough* *cough* you should try [Dev]astation *cough* *cough*
Sent from my SGH-I997 using xda premium
Wow... Even after my humble comment... Geesh.
Haha... And the file was just posted 29hrs ago, Hey Its dling I'll post back. Do you suggest a complete wipe?
Not sure what your saying...
And yes always a complete wipe...
Maybe read the links that have been provided on my signature from the jedi masters..not my work just the messenger...
Too Assist you...
kermyb123 said:
Haha... And the file was just posted 29hrs ago, Hey Its dling I'll post back. Do you suggest a complete wipe?
Click to expand...
Click to collapse
The cleaner the slate, the better.
MaliciousIntent69 said:
The cleaner the slate, the better.
Click to expand...
Click to collapse
Running your rom, Not too shabby - the animations are a little over the top... Do you have a suggestion for kernel?
kermyb123 said:
Running your rom, Not too shabby - the animations are a little over the top... Do you have a suggestion for kernel?
Click to expand...
Click to collapse
The kernel its running is what I've found to run best with it. But you could try entropys kernel
Sent from my SGH-I997 using xda premium
Turn off animation will help...in the displays option...or put it for some amination
Just wondering wht DEV is missing the samsung email app... but you kept the AT&T family mapper... I need to find my email apk... or use k9 I guess.
I would have posted on your release.. but I guess I have lingered without posting wayyyy too long... 10 post min
kermyb123 said:
Just wondering wht DEV is missing the samsung email app... but you kept the AT&T family mapper... I need to find my email apk... or use k9 I guess.
I would have posted on your release.. but I guess I have lingered without posting wayyyy too long... 10 post min
Click to expand...
Click to collapse
Somehow the ATT family mapper apk was left in. Must of slipped passed my eyes. And I took out the email app to make a bit more room. As a lot of people just use Gmail so I kept the Gmail apk.
Sent from my SGH-I997 using xda premium
kermyb123 said:
Just wondering wht DEV is missing the samsung email app... but you kept the AT&T family mapper... I need to find my email apk... or use k9 I guess.
I would have posted on your release.. but I guess I have lingered without posting wayyyy too long... 10 post min
Click to expand...
Click to collapse
http://db.tt/JCEkrcff
DL then install....
bigjoe2675 said:
http://db.tt/JCEkrcff
DL then install....
Click to expand...
Click to collapse
Bigjoe always has links for everything!
Sent from my SGH-I997 using xda premium
Thanks... Link king
MaliciousIntent69 said:
Bigjoe always has links for everything!
Sent from my SGH-I997 using xda premium
Click to expand...
Click to collapse
kermyb123 said:
Thanks... Link king
Click to expand...
Click to collapse
No king or anything....just an average joe..
Well then..."Joe Know's -Links-"
The DEV Rom is working nice, like I before all I can see is the missed bloat and for some of us who may use our devices for work and need to seem semi professional by responding from the correct email, email.apk. Other than that a toggle for the odd-ball animations would be nice... it may grow on me, the jury is out right now.
I'll run this for a while and possible fash over a differnt kernel or two and see what I come up with.
Thank you both for your time.
kermyb123 said:
Ok I'm looking for somthing simple... And there are tons of UCLB3 leaked roms that have been modded and I just get so much lag on the lock screen - I have used the "Heimdall return to stock UCLB3" which does not have the lag. Tried another ROM via CWM that was "stock" with the daily driver kernel (lagged like hell). CWM to stock kernel with the ROM that was marked stock - still lagged.
Click to expand...
Click to collapse
I suspect that the lockscreen lag you're seeing is related to underclocking when the phone is locked... Potentially with one of the Infusion kernels.
Consider running Entropy's kernel.
Or the stock kernel... But that locks you out of stuff like CWM and Voodoo Sound / Lagfix.
Need to root the "official" Samsung UCLB3 leak or the official AT&T Gingerbread release for the Infuse 4g, and still want to do it yourself on your phone? See this how-to that I just worked up.:
http://forum.xda-developers.com/showthread.php?p=24935969