[Tutorial] [Discontinued] How to restore stock ROM and S-On after AlphaRevX S-Off - HTC Desire S

I am sorry to announce, but I am pulling this tutorial. Tutorial is not meant for branded phones and recently I am getting few of those asking for help!
Sorry unbranded device owners, but my intention is to have brick free world!
Have a nice day! And safe flashing.
P.s. FYI, new boot loader can be unlocked using htcdev.com and locked again using the same.
/Edzz

good to know if somthing goes wrong and must be done in warranty time

can I use your guide for my thread ? I will give you credit.. thanks.

Why not do it the easy way since you're already S-OFF?
Take the ENG HBOOT found here and put the PG88IMG.zip in the root of your SD card
Boot into the bootloader (Volume Down + POWER)
Go into FASTBOOT mode
The bootloader will automagically detect your new HBOOT and install it
After rebooting your phone you can install any RUU you want. That will bring HBOOT back to the installed original
Make sure you make a good backup up front and be carefull what RUU to flash. The newer ones will overwrite HBOOT with version 0.98.0002, which, up to this date, can't be put to S-OFF yet by Alpharevx. I recommand you install the oldest RUU version you can find. A list of original ROMS can be found here
Good luck!

@nodeffect
Feel free.
@jorgen2009
such approach won't work with Alpharev hboot. They appear to have kinda locked it by making it appear ar 6.x Hboot version. That means, that bootloader will bypass upgrade. Been there, tried that, didn't work

chiekurz said:
@nodeffect
Feel free.
@jorgen2009
such approach won't work with Alpharev hboot. They appear to have kinda locked it by making it appear ar 6.x Hboot version. That means, that bootloader will bypass upgrade. Been there, tried that, didn't work
Click to expand...
Click to collapse
The original ENG HBOOT didn't work if i recall correctly. Redownload the ENG-HBOOT and you'll notice the version has changed to a number higher than Alpharev's. It DOES work now, in fact, my phone is S-ON again as we speak

Will have to try that again.

jorgen2009 said:
Why not do it the easy way since you're already S-OFF?
Take the ENG HBOOT found here and put the PG88IMG.zip in the root of your SD card
Boot into the bootloader (Volume Down + POWER)
Go into FASTBOOT mode
The bootloader will automagically detect your new HBOOT and install it
After rebooting your phone you can install any RUU you want. That will bring HBOOT back to the installed original
Make sure you make a good backup up front and be carefull what RUU to flash. The newer ones will overwrite HBOOT with version 0.98.0002, which, up to this date, can't be put to S-OFF yet by Alpharevx. I recommand you install the oldest RUU version you can find. A list of original ROMS can be found here
Good luck!
Click to expand...
Click to collapse
So i downloaded 2 files:
The PG88IMG.zip and eng_hboot
what do i put on my sd card, only PG88IMG.zip or both of them?

.sh4d0w. said:
So i downloaded 2 files:
The PG88IMG.zip and eng_hboot
what do i put on my sd card, only PG88IMG.zip or both of them?
Click to expand...
Click to collapse
Only the PG88IMG.zip, don't rename or extract it or it won't work, just put the file in the root of your SD card

So what is the use of Eng S-Off.rar?
And another question the RUU is an .exe?
And is this old enough RUU_Saga_HTC_Europe_1.28.401.1_Radio_20.28b.30.0805U_38.03.02.11_M_release_177977_signed ?
Thanks.
LE: i flashed the pg88img.zip and i am still Alpharevx hboot 6.xxxxx etc (but the update was successful)
Maybe... if i flash a RUU? I just wanted to get eng s-off.. don't want to get s-on now

.sh4d0w. said:
So what is the use of Eng S-Off.rar? [/QUOTE
Look at this thread
And another question the RUU is an .exe?
Click to expand...
Click to collapse
yes, it's direct from HTC and unfortunately can only be run from within Windows
And is this old enough RUU_Saga_HTC_Europe_1.28.401.1_Radio_20.28b.30.0805U_38.03.02.11_M_release_177977_signed ?
Click to expand...
Click to collapse
yes, that comes with the HBOOT 0.98.0000
Thanks.
Click to expand...
Click to collapse
your welcome
LE: i flashed the pg88img.zip and i am still Alpharevx hboot 6.xxxxx etc (but the update was successful)
Maybe... if i flash a RUU? I just wanted to get eng s-off.. don't want to get s-on now
Click to expand...
Click to collapse
just check again in fastboot, ENG HBOOT version has changed to 6.98.2000 iirc. After running the RUU it should be 0.98.0000 again as ENG HBOOT can be overwritten in contrast to the AlphaRevX HBOOT. If you only want ENG HBOOT don't flash the RUU obviously
Click to expand...
Click to collapse

Ok i just checked.
I have like this
--- AlphaRev ---
SAGA PVT SHIP S-OFF RL
HBOOT-6.98.1002
RADIO-3805.06.02.03_M
eMMC-boot
Mar 10 2011, 14:58:38
So nothing changed.... and i did the update like... 5 times
It asks vol + to install update
And after it's finished
Power down to reboot.
Maybe i got the wrong file? The PG88IMG.zip attached here http://forum.xda-developers.com/showthread.php?t=1113820

.sh4d0w. said:
Ok i just checked.
I have like this
--- AlphaRev ---
SAGA PVT SHIP S-OFF RL
HBOOT-6.98.1002
RADIO-3805.06.02.03_M
eMMC-boot
Mar 10 2011, 14:58:38
So nothing changed.... and i did the update like... 5 times
It asks vol + to install update
And after it's finished
Power down to reboot.
Maybe i got the wrong file? The PG88IMG.zip attached here http://forum.xda-developers.com/showthread.php?t=1113820
Click to expand...
Click to collapse
You can try with this modified ENG Hboot for devices with AlpharevX
Please, report if works

heavyhms said:
You can try with this modified ENG Hboot for devices with AlpharevX
Please, report if works
Click to expand...
Click to collapse
Nope.... doesn't work at all. Not even loading.

.sh4d0w. said:
Nope.... doesn't work at all. Not even loading.
Click to expand...
Click to collapse
Try to re-download Eng Hboot (normal and modified) after deleting browser cache. Disable antivirus software during download and transfer to microsd.
Do not download file directly with desire S browser: use a pc
You can try also with a different microsd card

.sh4d0w. said:
Nope.... doesn't work at all. Not even loading.
Click to expand...
Click to collapse
Should be the right version...
BTW I changed the link in my first post here to this one. I accidently posted the wrong version

BTW...... the original eng hboot is 1 mb and this modified one is only 260 kb ???
Maybe that's why it doesn't work.
In winrar i have like this
Name__________________Size________Packed
engHBOOToverARX.img___1.048.576____262.273

Added your guide to my thread. Thanks for this one, it's very useful.
p.s. you got a typo for the title of this thread. "Tutorial", not totutial... please correct it, thanks

I did it.. using the adb comands in first page..
LE: Great! Alpharev beta site doesn't work.....stuck with stock lol ))
LE2: New alphareve+unrevoked site http://revolutionary.io/ Back to S-OFF

chiekurz said:
(Windows only? Not sure if RUU works on other platforms)
With thanks to user Murchelago for providing adb method to restore stock boot and HTC for providing RUU's here is step by step, how to return to stock after Alpharevx S-Off.
Prerequisites:
Debugging mode on
Root access
Hboot.img (attached)
RUU for stock restore. Can be downloaded here: http://forum.xda-developers.com/showthread.php?t=1002506
How to:
1. Put the hboot.img you want to flash in the root of the sdcard.
2. In cmd run the following commands (after each command press enter):
adb devices
adb shell
su
dd if=/dev/block/mmcblk0p18 of=/sdcard/backup.img
dd if=/sdcard/hboot.img of=/dev/block/mmcblk0p18
reboot bootloader
3. RUN Downloaded RUU
4. You are on stock again!
After running ADB commands and rebooting into bootloader, you will get security warning. This is normal, just continue with flashing RUU.
Worked for me perfectly 3 times without any issues. However issues might occur and I can not take any responsibility for them. Use this tutorial on your own responsibility
Click to expand...
Click to collapse
I can confirm that you CANNOT just RUU a device. As the name implies, ROM Update Utility.
I followed everything on the first page and can confirm that I've successfully reverted back to HBOOT 0.98.0000.
AFAIK my phone was flashed with the hTC_Asia_WWE_1.31.707.2 on stock.
I tried to RUU using the oldest firmware that I can find, HTC_Europe_1.28.401.1. But it gave me the error 131 (AFAIK) customer ID error. About language and stuffs. Model ID, etc.
So I tried to RUU with the oldest hTC_Asia_WWE_1.31.707.2 (the oldest that I can find that is an ASIA one.). Then it gave me the error 140 (bootloader error). The readme doesn't have any information on this one, even on the net for HTC Saga.
So I tried to RUU with the "LATEST" hTC_Asia_WWE_1.48.707.1 that I found and everything works well. I really am not quite sure why I was not able to "downgrade", just "upgrade".
AFAIK i just updated my radio to the latest 20.28I.30.085AU_3805.06.02.03_M found on the hTC_Asia_WWE_1.48.707.1 when I was S-OFFed. It may have something to do with it.
Just an additional info. I'm now S-ON and on-stock hTC_Asia_WWE_1.48.707.1_20.28I.30.085AU_3805.06.02.03_M

Related

[WARNING] Do not flash a new official RUU/ROM/OTA if you have root and/or S-OFF

DO NOT FLASH A NEW RUU OR OFFICIAL ROM IMAGE UNLESS YOU *REALLY* KNOW WHAT YOU ARE DOING !
The title says it all!​
Doktaphex said:
As the title suggests, this is warning against flashing the new RUU_Ace_HTC_WWE_1.72.405.3_R_Radio_12.28e.60.140f_ 26.04.02.17_M2_release. It contains a new version of HBoot that breaks root and standard S-OFF! Please refer to these threads for more info:
http://forum.xda-developers.com/showthread.php?t=879375
http://forum.xda-developers.com/showthread.php?t=875099
You may be safe if you have full radio S-OFF and SuperCID but this is unconfirmed, and I would steer well clear until the DEVs have cracked open this latest HBoot.
Click to expand...
Click to collapse
Confirmed:
Only if you have full radio S-OFF you can 'downgrade' to 1.32xxxxxx and root
Yes, I can confirm that, too. You have to have Super-CID (Radio S-OFF) to downgrade. Rooting is not possible in this new one. Yet.
Can please someone explain me what's the real difference between ENG S OFF But CID 11111 and SHIP S OFF and CID HTC....?
ENG S-OFF: It is engineering bootloader S-OFF (may include Radio S-OFF). Allows custom bootloader commands, for example radio flashing, also allows to install custom roms.
SHIP S-OFF: Radio S-OFF, does not allow radio flashing, but allows ClockworkMod flashing. Usually comes together with SuperCID.
CID 11111111: Super-CID, Super Carrier ID, allows you to downgrade, and flash really anything to the phone without the phone saying "no thanks".
CID HTC__xxx: HTC Carrier ID, does not allow downgrading via RUU, but you can still flash through ClockworkMod if you are S-OFF.
Thank you very much for this answer..I ask because i cannot find this information somewhere in one post!
I am with ENG S-OFF and CID 11111111
So i can flash the new RUU and i am able to revert back to 1.32xxxxxx and root again.Correct?
Looks like its been rooted.
http://forum.xda-developers.com/showpost.php?p=9936625&postcount=91
At least it has if you flash just the system.img
Yeah but it needs clockworkmod, which goes away if people use the actual RUU. Also flashing system.img does not replace the bootloader, so S-OFF stays in fine (also hboot S-OFF).
How can you tell what your CID is?
madindehead said:
How can you tell what your CID is?
Click to expand...
Click to collapse
Bootloader > Fastboot > System Info (or something like that)
If you are SuperCID then it is 11111111 if not, then it begins with HTC_xxxx
looks like also this RUU_Ace_Orange_ES_1.75.75.2_Radio_12.28e.60.140f_2 6.04.02.17_M2_release also seems to stop you gaining root and fix's patched Hboot as someone saying he flashed the rom and can't gain root.
joners said:
Looks like its been rooted.
http://forum.xda-developers.com/showpost.php?p=9936625&postcount=91
At least it has if you flash just the system.img
Click to expand...
Click to collapse
can you tell how to extract the system.img from rom?
all i get is a [0] file. dont know what to do with it.
[HOW TO SAFELY FLASH THE NEW ROM AND BE ABLE TO REVERT BACK]
Currently, the new ROM (1.72.405.3) has a new HBOOT (so you can't install ENG HBOOT S-OFF) and is difficult to root (not as simple as it is with previous ROMs). However, it also has a better radio, and a faster ROM with various bugfixes. This ROM is also Android Froyo v2.21. If you want to try out the new ROM, whilst maintaining the ability to 'revert' back to your older, hackable state then follow the below instructions carefully. Also, do not worry about extracting system.img files and whatnot.
*It is recommended to do a NANDROID BACKUP first
*All RUUs can be obtained from www.xdafil.es/DesireHD/RUU/
*If you don't do steps 1-3 properly and flash the new ROM, you will not be able to revert back
*Radio S-OFF and SuperCID can be obtained by following instructions in this thread: http://forum.xda-developers.com/showthread.php?t=857537
*Tutorial for flashing RUUs (needed for steps 4 & 8): http://forum.xda-developers.com/showthread.php?t=841890
1. Install Radio S-OFF (NOT ENG HBOOT S-OFF) and SuperCID
2. Go to bootloader, then System Info. (If System Info is not there, but you have SHIP S-OFF skip step 3 and proceed to step 4)
3. Make sure CID is 11111111 *AND* the bootloader shows S-OFF. If not, repeat step 1
4. You can now flash the new ROM (1.72.405.3)
5. This will remove ENG HBOOT (if you had it) and ClockworkMod
6. If you did steps 1-3 correctly, your Desire HD should still be S-OFF. Go to bootloader and check. If not, you did not do steps 1-3 correctly and will have to wait for the new HBOOT to be cracked.
When you are done with the new ROM and want to go back, follow the instructions below:
7. Download the HTC RUU 1.32.405.6 of your choice (Since you are SuperCID you can flash any RUU)
8. Flash it to your Desire HD
9. Root your ROM using Visionary, and install ROM Manager and flash ClockworkMod. You can optionally install ENG HBOOT S-OFF now if you like.
If you made a NANDROID Backup, you can restore this now from ClockworkMod
joners said:
Looks like its been rooted.
http://forum.xda-developers.com/showpost.php?p=9936625&postcount=91
At least it has if you flash just the system.img
Click to expand...
Click to collapse
I can't get this to work myself, unfortunately.
joners said:
Looks like its been rooted.
http://forum.xda-developers.com/showpost.php?p=9936625&postcount=91
At least it has if you flash just the system.img
Click to expand...
Click to collapse
I have this working. The supplied .zip file does not include Superuser.apk. After following the instructions and then installing Superuser from the market I now have root on this rom.
Look forward to testing it over the next couple of days while I lay in hope of some custom roms based off this version.
EDIT: Superuser keeps force closing
My bootloader says
ACE PVT ENG S-OFF
HBOOT-0.85 2007 (PD9810000)
and system info says
CID-11111111
Am I good to go or shall I do something else?
Thank you for sharing info.
doh!
being used to the days of winmo I flashed this rom over my cyanogen taking a backup first.
Now I can't revert back to the old stock rom, any way of doing this (easily ish)?
Hi, I'm ENG S-Off but my CID is not 1111111, what's the safest way to do the Super-CID?
I'm stucked abroad using a **** phone cos I can't use another sim in my DHD
Sent from my Desire HD using Tapatalk on Revolution 1. 92
ninja.rogue said:
My bootloader says
ACE PVT ENG S-OFF
HBOOT-0.85 2007 (PD9810000)
and system info says
CID-11111111
Am I good to go or shall I do something else?
Thank you for sharing info.
Click to expand...
Click to collapse
Also on the same boat...
Anyone??
ninja.rogue said:
My bootloader says
ACE PVT ENG S-OFF
HBOOT-0.85 2007 (PD9810000)
and system info says
CID-11111111
Am I good to go or shall I do something else?
Thank you for sharing info.
Click to expand...
Click to collapse
looks like you are, you have superCID.

[Q] S-OFF & Root on Pyramid whith HBOOT 1.19 is possible?

Hi to hall.
I bought an HTC Sensation with HBOOT 1.17. I've rooted it with the Official LEAK ROM, Sense 3.5 "2.08.401.1_stock_rooted_signed-v0.3.zip" ad S-OFF it.
Unfortunately I had to follow the procedure of S-ON to send back the phone in technical assistance.
Now I have my phone with display repaired, but the assistance have upgrated my HBOOT in new version 1.19.
These are bootloader informations:
*** UNLOCKED ***
PYRAMID PVT SHIP S-ON RL
HBOOT-1.19.0000
eMMC-boot
Sep 6 2011,19:13:20
If i try the S-OFF with the revolutionary.io site it tell me tath the 1.19 is not supported.
How can i have the permanent root and the S-OFF?
Thank's and merry christmas to everybody.
can't you run RUU to reflash hboot to early version you use it to flash the revolutionary.io hboot back to stock
I'm a newbie, have you a guide or an how-to url?
Tanks
Sent from my HTC Sensation Z710e using XDA App
UP!
Nobody knows a solution to my problem?
You could try to flash back to hboot 1.17, check http://forum.xda-developers.com/showpost.php?p=20681060&postcount=22.
Just place the file (it must be called PG58IMG.zip) on the root folder of your sd-card, triple check md5 and then boot into bootloader to flash it.
If that works use should be able to S-Off.
Edit: Here are the same instructions (it's about firmware flashing but it's the same method, my reference is also mentioned there)
Edit2: I think Madenssblade is talking about flashing back to an earlier STOCK rom, see here, you can try that if the above does not work
Thank's a lot!
A question, if i launch the downgrade, it will destroy all my data?
If you flash the new ROM, yes (but not the data on your sdcard).
If you succeed in flashing the new hboot, no.
Good luck, I don't know if this all works given your device is S-ON, but it's worth a try (your HBOOT says unlocked).
A small update.
Yesterday i installed the app 4EXT Recovery Control and i noticed with surprise that i still root; perhaps it was sleeping in the state.
I cannot yet find a guide to give the S-OFF at HBOOT 1.19 .
ziopippo said:
I'm a newbie, have you a guide or an how-to url?
Tanks
Sent from my HTC Sensation Z710e using XDA App
Click to expand...
Click to collapse
Hi, try to downgrade your firmware. I am not sure but it may work. Try the following.
A. Downgrading the firmware
Visit this thread. Download v1.17 firmware . Are u having superCID? If so then you can download any v1.17 firmware else choose that firmware file which includes your CID. If you are not sure about your CID follow that same thread to find it.
Flash the firmware by the following method.
1. place Firmware PG58IMG.zip (v1.17) on the root of your sdcard.
2. Remove the battery.
3. Wait a minute.
4. Put the battery.
5.Press power+ volume- key together.
6.Phone will boot into bootloader.
7.Follow the instruction on your phone screen.
If the firmware downgrade successfull then Perform Revolutionary method to make your device S-OFF. If this method does not work try flashing an RUU.
B. Flashing an older RUU (HBOOT 1.17 )
Find a suitable RUU from here.
If RUU Flashing fails, boot into bootloader. Then retry to flash the RUU.
Then try to follow Revolutionary method.
musarraf172 said:
Hi, try to downgrade your firmware. I am not sure but it may work. Try the following.
A. Downgrading the firmware
Visit this thread. Download v1.17 firmware . Are u having superCID? If so then you can download any v1.17 firmware else choose that firmware file which includes your CID. If you are not sure about your CID follow that same thread to find it.
Flash the firmware by the following method.
1. place Firmware PG58IMG.zip (v1.17) on the root of your sdcard.
2. Remove the battery.
3. Wait a minute.
4. Put the battery.
5.Press power+ volume- key together.
6.Phone will boot into bootloader.
7.Follow the instruction on your phone screen.
If the firmware downgrade successfull then Perform Revolutionary method to make your device S-OFF. If this method does not work try flashing an RUU.
B. Flashing an older RUU (HBOOT 1.17 )
Find a suitable RUU from here.
If RUU Flashing fails, boot into bootloader. Then retry to flash the RUU.
Then try to follow Revolutionary method.
Click to expand...
Click to collapse
I have tried this process several times but my HTC says "Parsing PG58IMG.zip"
could this be because i am S-ON? i am trying to downgrade from 1.23
slimldj said:
I have tried this process several times but my HTC says "Parsing PG58IMG.zip"
could this be because i am S-ON? i am trying to downgrade from 1.23
Click to expand...
Click to collapse
Did you try Flashing an RUU?
Sent from my HTC Sensation using Tapatalk
musarraf172 said:
Did you try Flashing an RUU?
Sent from my HTC Sensation using Tapatalk
Click to expand...
Click to collapse
yes. but when i try to, the phone enters the "black htc screen" and after a couple of minutes i get error 155 from the RUU saying i should get the corrent ROM Update utility.
i dont know whats wrong
Also i have tried to get the rom.zip from the temp folder of my computer sourced from the RUU. changed the name to P......zip so that bootloader can flash. it just ends up saying "parsing P........zip"
slimldj said:
yes. but when i try to, the phone enters the "black htc screen" and after a couple of minutes i get error 155 from the RUU saying i should get the corrent ROM Update utility.
i dont know whats wrong
Also i have tried to get the rom.zip from the temp folder of my computer sourced from the RUU. changed the name to P......zip so that bootloader can flash. it just ends up saying "parsing P........zip"
Click to expand...
Click to collapse
As I said earlier , be in bootloader mode first. Then flash RUU. Error 155 should go off.
musarraf172 said:
As I said earlier , be in bootloader mode first. Then flash RUU. Error 155 should go off.
Click to expand...
Click to collapse
tried that as well.. as soon as the RUU says sending, i see the error again... 155
slimldj said:
tried that as well.. as soon as the RUU says sending, i see the error again... 155
Click to expand...
Click to collapse
Hope surely the following posts will help you.
http://forum.xda-developers.com/showthread.php?t=1469296
http://forum.xda-developers.com/showthread.php?t=1478828
musarraf172 said:
Hope surely the following posts will help you.
http://forum.xda-developers.com/showthread.php?t=1469296
http://forum.xda-developers.com/showthread.php?t=1478828
Click to expand...
Click to collapse
hello excuse the disorder but having the same problem on and hboot 1.19 s-on can not flash a stock ruu wanted to ask if you found a way to put s-off.

(Help!) Attempted wrong firmware upgrade from 2.3.4 HTC Sensation Z710a

ok so i wanted to install the ICS on my android but it needed the 4.03 firmware but the 4.03 firmware needed a firmware from 3.x.x so i when to find one and now my device is bricked i can still flash to ROM but thats about it. i can turn it on and it just sits there with a white screen with a label saying "HTC". i have tried restoring from my ROM back ups since i got clock mod installed in the recovery menu i tried every thing i wiped every thing and when i flash or re flash a rom my HTC goes into a booting cycle. and my CID is supper cid and i remember my HBOOT being 1.18.000 but thats about it. i had stock firmware of 2.3.4
My phone had firmware with vodafone australia.
my SD card is intact but i think internal SD card is corrupted or what ever where ever the firmware gets flashed to.
and i cannot seem to find the original vodafone HTC Sensation 2.3.3 firmware so i could restore it and then update it to 2.3.4.
and i tend to get an error from:
E:format_volume: make_extf4fs failed on /dev/block/mmcbllk1p2
this when i try to do factory reset from clockmod
and on my HBOOT it say:
-Revolutionary-
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.27.1100
RADIO- 11.21.3504. 13_2
OpenADSP-v02. 6. 0. 2226. 00. 0104
eMMC-boot
jan 13 2012, 17:33:34
please help is my phone completly bricked, corrupted?
is there still a way for me to check my MD5 sum from HBOOT or through the computer so i could get the right firmware and overwrite the bricked one.
XxUnkn0wnxX said:
ok so i wanted to install the ICS on my android but it needed the 4.03 firmware but the 4.03 firmware needed a firmware from 3.x.x so i when to find one and now my device is bricked i can still flash to ROM but thats about it. i can turn it on and it just sits there with a white screen with a label saying "HTC". i have tried restoring from my ROM back ups since i got clock mod installed in the recovery menu i tried every thing i wiped every thing and when i flash or re flash a rom my HTC goes into a booting cycle. and my CID is supper cid and i remember my HBOOT being 1.18.000 but thats about it. i had stock firmware of 2.3.4
My phone had firmware with vodafone australia.
my SD card is intact but i think internal SD card is corrupted or what ever where ever the firmware gets flashed to.
and i cannot seem to find the original vodafone HTC Sensation 2.3.3 firmware so i could restore it and then update it to 2.3.4.
and i tend to get an error from:
E:format_volume: make_extf4fs failed on /dev/block/mmcbllk1p2
this when i try to do factory reset from clockmod
and on my HBOOT it say:
-Revolutionary-
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.27.1100
RADIO- 11.21.3504. 13_2
OpenADSP-v02. 6. 0. 2226. 00. 0104
eMMC-boot
jan 13 2012, 17:33:34
please help is my phone completly bricked, corrupted?
is there still a way for me to check my MD5 sum from HBOOT or through the computer so i could get the right firmware and overwrite the bricked one.
Click to expand...
Click to collapse
What md5 checksum do you want to check ?? There are many utilities to check md5 checksum on computer. Run superwipe script , then install Android Revolution HD 6.2.1 , You have the correct firmware for it. I can see.
I have a same problem.
Didn't read the thread very well and I upgraded the wrong firmware.
Now, I just see the ''HTC'' logo and after that it's only rebooting over and over again. I downloaded the firmware I needed, thought I will just replace it with this ''broken'' one, but I'm getting errors all the time. And after that, again rebooting.
HTC Sensation, S-Off, first firmware was 2.3.4.
Error is: ''CID incorrect, update fail'' in HBOOT.
Only way I can stop rebooting after that message is to take out the battery.
Anyone got any other solutions except the first answer?
Thank you in advance, sorry about my bad english.
NOTE: I'm a noob at this, just wanted ICS on my phone. So, please, explain it in ''moron language''
BeatGates said:
I have a same problem.
Didn't read the thread very well and I upgraded the wrong firmware.
Now, I just see the ''HTC'' logo and after that it's only rebooting over and over again. I downloaded the firmware I needed, thought I will just replace it with this ''broken'' one, but I'm getting errors all the time. And after that, again rebooting.
HTC Sensation, S-Off, first firmware was 2.3.4.
Error is: ''CID incorrect, update fail'' in HBOOT.
Only way I can stop rebooting after that message is to take out the battery.
Anyone got any other solutions except the first answer?
Thank you in advance, sorry about my bad english.
NOTE: I'm a noob at this, just wanted ICS on my phone. So, please, explain it in ''moron language''
Click to expand...
Click to collapse
Pull the card out and boot it into hboot mode. Then to recovery. Mount your sd card. Plug it into your computer. Delete the incorrect firmware. Find a superwipe zip. Flash Zip. Then flash correct firmware.
XxUnkn0wnxX said:
ok so i wanted to install the ICS on my android but it needed the 4.03 firmware but the 4.03 firmware needed a firmware from 3.x.x so i when to find one and now my device is bricked i can still flash to ROM but thats about it. i can turn it on and it just sits there with a white screen with a label saying "HTC". i have tried restoring from my ROM back ups since i got clock mod installed in the recovery menu i tried every thing i wiped every thing and when i flash or re flash a rom my HTC goes into a booting cycle. and my CID is supper cid and i remember my HBOOT being 1.18.000 but thats about it. i had stock firmware of 2.3.4
My phone had firmware with vodafone australia.
my SD card is intact but i think internal SD card is corrupted or what ever where ever the firmware gets flashed to.
and i cannot seem to find the original vodafone HTC Sensation 2.3.3 firmware so i could restore it and then update it to 2.3.4.
and i tend to get an error from:
E:format_volume: make_extf4fs failed on /dev/block/mmcbllk1p2
this when i try to do factory reset from clockmod
and on my HBOOT it say:
-Revolutionary-
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.27.1100
RADIO- 11.21.3504. 13_2
OpenADSP-v02. 6. 0. 2226. 00. 0104
eMMC-boot
jan 13 2012, 17:33:34
please help is my phone completly bricked, corrupted?
is there still a way for me to check my MD5 sum from HBOOT or through the computer so i could get the right firmware and overwrite the bricked one.
Click to expand...
Click to collapse
It looks like you have a valid version of the Firmware (HBOOT 1.27.1100). However you need to understand that that version ONLY supports ICS ROMs, so it won't support your old ROM even if you recover it. Also as usual you should SuperWipe when changing things this dramatically.
As you still seem to be able to get into Recovery try the following:
i) Download the Superwipe Script from the ARHD thread, in the Downloads bit in he first post.
ii) Download a full ICS ROM, take your pick (my preference is Virtuous Inquisition 3.5).
iii)Copy the files over to the SD-card from your PC.
iv) Delete the PG59IMG.zip from the SD-card. (ADDED IN EDIT1)
In recovery, run the Superwipe Script. Then Install the ICS ROM. The first re-boot will take a few mins.
To check MD5s just get a free MD5 checker for your PC and also get one for the phone, when it's backup up and running.
GL
---------- Post added at 08:24 AM ---------- Previous post was at 08:18 AM ----------
BeatGates said:
I have a same problem.
Didn't read the thread very well and I upgraded the wrong firmware.
Now, I just see the ''HTC'' logo and after that it's only rebooting over and over again. I downloaded the firmware I needed, thought I will just replace it with this ''broken'' one, but I'm getting errors all the time. And after that, again rebooting.
HTC Sensation, S-Off, first firmware was 2.3.4.
Error is: ''CID incorrect, update fail'' in HBOOT.
Only way I can stop rebooting after that message is to take out the battery.
Anyone got any other solutions except the first answer?
Thank you in advance, sorry about my bad english.
NOTE: I'm a noob at this, just wanted ICS on my phone. So, please, explain it in ''moron language''
Click to expand...
Click to collapse
You haven't detailed what your HBOOT is at the moment, what does it say if you go into BootLoader ?
As it's mentioning CID, I assume you didn't SuperCID the phone, not an issue just get the right one for you CID from:
http://forum.xda-developers.com/showthread.php?t=1459767
After you update the Firmware you'll need to:
i) SuperWipe
ii) Install ICS ROM
iii) Remove the PG58IMG.zip file from the SD-Card.
gol_n_dal said:
It looks like you have a valid version of the Firmware (HBOOT 1.27.1100). However you need to understand that that version ONLY supports ICS ROMs, so it won't support your old ROM even if you recover it. Also as usual you should SuperWipe when changing things this dramatically.
As you still seem to be able to get into Recovery try the following:
i) Download the Superwipe Script from the ARHD thread, in the Downloads bit in he first post.
ii) Download a full ICS ROM, take your pick (my preference is Virtuous Inquisition 3.5).
iii)Copy the files over to the SD-card from your PC.
iv) Delete the PG59IMG.zip from the SD-card. (ADDED IN EDIT1)
In recovery, run the Superwipe Script. Then Install the ICS ROM. The first re-boot will take a few mins.
To check MD5s just get a free MD5 checker for your PC and also get one for the phone, when it's backup up and running.
GL
---------- Post added at 08:24 AM ---------- Previous post was at 08:18 AM ----------
You haven't detailed what your HBOOT is at the moment, what does it say if you go into BootLoader ?
As it's mentioning CID, I assume you didn't SuperCID the phone, not an issue just get the right one for you CID from:
http://forum.xda-developers.com/showthread.php?t=1459767
After you update the Firmware you'll need to:
i) SuperWipe
ii) Install ICS ROM
iii) Remove the PG58IMG.zip file from the SD-Card.
Click to expand...
Click to collapse
My HBOOT says:
-Revolutionary-
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.27.1100
RADIO-10.14.9035.01_M
eMMC-BOOT
Jan 13 2012, 17:33:34
In this thread ''[Firmware][Feb 22]User-Friendly Firmware 1.17/3.12/3.24 & 3.30 Unlocked'' I downloaded ''HTC China & H3G'', version 3.30 by mistake.
HBOOT installed the PG58IMG.zip file and after that he's just rebooting.
I have T-Mobile Europe carrier but my HTC is unlocked.
Now, I don't really know what firmware to download or how to check for the right one. Also, I don't know how to SuperWipe or anything so I need someone just to write all the steps. From Wipe to ROM. I found nothing on this anywhere else and I searched all night. I'm new to Android (Have Sensation for about 2 months) so thank you for your help people! Really appreciate it.
EDIT: I tried some things and now my HBOOT says:
-Revolutionary-
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.27.1100
RADIO- 11.21.3504. 13_2
OpenADSP-v02. 6. 0. 2226. 00. 0104
eMMC-boot
jan 13 2012, 17:33:34
The same thing as XxUnkn0wnxX is getting.
So I'm following the steps from gol_n_dal to see what will happen.
I have done the same thing. I am on UK Orange and have flashed with the wrong firmware. My phone is now on a constant reboot loop. When i enter HBOOT i get the following:
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.27.1100
RADIO-10.14.9035.02_2
eMMC-boot
HBOOT
CID incorrect!
Update Fail!
I think I need to setup super CID, but I cant as I cant boot the phone to connect via adb on my windows PC... Is there anything I can do to fix?
dankellys said:
I have done the same thing. I am on UK Orange and have flashed with the wrong firmware. My phone is now on a constant reboot loop. When i enter HBOOT i get the following:
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.27.1100
RADIO-10.14.9035.02_2
eMMC-boot
HBOOT
CID incorrect!
Update Fail!
I think I need to setup super CID, but I cant as I cant boot the phone to connect via adb on my windows PC... Is there anything I can do to fix?
Click to expand...
Click to collapse
Take out your sdcard from phone . connect the sdcard to your pc via some sdcard reader. Then delete the PG58IMG.zip from the scard. You will be fine.
musarraf172 said:
Take out your sdcard from phone . connect the sdcard to your pc via some sdcard reader. Then delete the PG58IMG.zip from the scard. You will be fine.
Click to expand...
Click to collapse
Tried that, still stuck in the loop. I think half the firmware update has ran, then it has failed, so i need to roll back...
Download both the 3.30 and 3.12 FW. Open the 3.12 zip on your computer and replace just the Hboot file with the one from the 3.30 zip. Then flash the customized zip so you'll have the 3.30 fw with the 3.12 boatloader (1.23 not 1.27) and then flash a 3.30 Rom.
Some phones arent booting with the 1.27 bootloader that comes with the 3.24 and 3.30 fw.
Sent from my HTC Sensation 4G using XDA App
dankellys said:
I have done the same thing. I am on UK Orange and have flashed with the wrong firmware. My phone is now on a constant reboot loop. When i enter HBOOT i get the following:
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.27.1100
RADIO-10.14.9035.02_2
eMMC-boot
HBOOT
CID incorrect!
Update Fail!
I think I need to setup super CID, but I cant as I cant boot the phone to connect via adb on my windows PC... Is there anything I can do to fix?
Click to expand...
Click to collapse
You can superCID from fastboot. Put it in bootloader, connect USB, bootloader should say fastboot USB.
Follow sticky guide in dev forum.
Is the pg58img.zip still on your SD?
Sent from my Pyramid-T
I had the same problem when I first tried to flash a rom, you just have to find the right firmware for your CID, find yours here: http://forum.xda-developers.com/showthread.php?t=1459767, and if you don't know your CID just superCID as shown in the guide here: http://forum.xda-developers.com/showthread.php?t=1192300 and skip steps 5,6,7, just manually boot into bootloader.
If you want you can also see what I did on this thread here: http://forum.xda-developers.com/showthread.php?t=1516373
The same thing happened to me
dankellys said:
Tried that, still stuck in the loop. I think half the firmware update has ran, then it has failed, so i need to roll back...
Click to expand...
Click to collapse
Mate, I'm having the same problem. I did a restore and I'm just stuck in a bootloop. I cant get the SuperCID file from Multiupload either because its been shut down and nowhere else hosts it apparently?!?! Is that it for us?. lol
Rynosensation said:
Mate, I'm having the same problem. I did a restore and I'm just stuck in a bootloop. I cant get the SuperCID file from Multiupload either because its been shut down and nowhere else hosts it apparently?!?! Is that it for us?. lol
Click to expand...
Click to collapse
Are you s-off ? If you are S-OFF , then you need not have any file.
Just boot into bootloader.
Open a fastboot terminal in pc.
and type
fastboot oem writecid 11111111
fastboot reboot-bootloader
fastboot getvar cid
After this you will get a reply like this CID : 11111111
If you are not S-OFF, then first install adb and fastboot in your pc from here for windows or from here for linux and follow this guide.
How To get your Hboot Version - 3 methods below
1. Run the revolutionary Utility you just downloaded from http://revolutionary.io/ and if it has found your device it should read
"Found your Device: HTC Sensation Z710* Applications -> Development)
4. With the phone switched on (not in HBOOT, just the regular home screen), plug in your USB cable and select HTC sync mode.(IGNORE any warning messages on your phone telling you it cannot find HTC Sync )
5. Launch revolutionary.exe. It should detect the phone and ask for your beta key. Type it (BE CAREFUL, as its case sensitive) or copy and paste it in.
If Revolutionary fails to find your phone verify you have all the drivers installed, try disk drive mode or charging mode (Linux users can use disk drive mode. Confirmed to be working by others)
6. Once you have entered your beta key correctly, follow any on screen prompts or actions from revolutionary and wait for it to S-Off,
7. You're done. Your Device will Successfully have S-OFF....if it hangs on method 3 and doesn't S-Off. See post 2 below for solutions.
IF REVOLUTIONARY SAYS FAILED YOUR PHONE IS NOT SUPPORTED. Go back and check hboot using the methods above. some users are told its failed and they still have S off now. If you have S-off your hboot will now be 1.17.1011 and revolutionary will tell you now your device is not supported
8. Revolutionary will now ask you to Install clockwork recovery mod after S OFF. Type N and install it manually below (the recovery provided is v4.0.1.4 doesn't charge when device is switched off, the one below v5.0.0.1 does charge)
9. Your Device now is S-off.
Click to expand...
Click to collapse
S-off confirmed
musarraf172 said:
Are you s-off ? If you are S-OFF , then you need not have any file.
Just boot into bootloader.
Open a fastboot terminal in pc.
and type
fastboot oem writecid 11111111
fastboot reboot-bootloader
fastboot getvar cid
After this you will get a reply like this CID : 11111111
If you are not S-OFF, then first install adb and fastboot in your pc from here for windows or from here for linux and follow this guide.
Click to expand...
Click to collapse
I have S-Off, but how do I Open a fastboot terminal in pc? Please excuse the newbeeness.
Thank you so much for the reply.
Open cmd prompt as admin (RT click)
cd to folder with fastboot drivers (e.g. cd C:/sdk/tools)
Connect in bootloader via USB, type "fastboot devices" and you should get a response with your serial number.
Enter commands as above!
Sent from my Pyramid-T
stringer7 said:
You can superCID from fastboot. Put it in bootloader, connect USB, bootloader should say fastboot USB.
Follow sticky guide in dev forum.
Is the pg58img.zip still on your SD?
Sent from my Pyramid-T
Click to expand...
Click to collapse
Thank You! Managed to superCID, re-ran firmware and InsertCoin 4.6.1. All working fine, and loving ICS.
Many thanks
stringer7 said:
Open cmd prompt as admin (RT click)
cd to folder with fastboot drivers (e.g. cd C:/sdk/tools)
Connect in bootloader via USB, type "fastboot devices" and you should get a response with your serial number.
Enter commands as above!
Sent from my Pyramid-T
Click to expand...
Click to collapse
Well guys, i cannot thank you enough!!! I've done what you both told me and ICS is now booting. I thought I was in big trouble for a while there. YOU RULE!!!!!!! Drinks on me. CHEEEERS!!!!!!!!!!!!
Rynosensation said:
I have S-Off, but how do I Open a fastboot terminal in pc? Please excuse the newbeeness.
Thank you so much for the reply.
Click to expand...
Click to collapse
By fastboot terminal I mean :
Open command prompt in windows.
CD to the directory where adb and fastboot installed ( generally platform-tools folder in the sdk).( Boot your phone into bootloader mode. and connect to pc)
Now type :
in the command prompt:
fastboot oem writecid 11111111
fastboot reboot-bootloader
fastboot getvar cid
After this you will get a reply like this CID : 11111111
---------- Post added at 09:36 AM ---------- Previous post was at 09:34 AM ----------
Rynosensation said:
Well guys, i cannot thank you enough!!! I've done what you both told me and ICS is now booting. I thought I was in big trouble for a while there. YOU RULE!!!!!!! Drinks on me. CHEEEERS!!!!!!!!!!!!
Click to expand...
Click to collapse
Glad to see that you figured it out.
stringer7 said:
Open cmd prompt as admin (RT click)
cd to folder with fastboot drivers (e.g. cd C:/sdk/tools)
Connect in bootloader via USB, type "fastboot devices" and you should get a response with your serial number.
Enter commands as above!
Sent from my Pyramid-T
Click to expand...
Click to collapse
If anyone doesn't know what ADB is check this out:
www (insert .) addictivetips.com/mobile/what-is-adb-and-how-to-install-it-android

[Q] Problem gaining s-off for Sensation

I've recently bought a new Sensation. I wnat to S-off in order to root it. My problem is that at revolutionairy.io I can't seem to find the possibility to choose my hboot version, 1.27.0000 how can I S-off then...? is this due to the fact that I updated to ICS with everything that followes.?
Ruus77 said:
I've recently bought a new Sensation. I wnat to S-off in order to root it. My problem is that at revolutionairy.io I can't seem to find the possibility to choose my hboot version, 1.27.0000 how can I S-off then...? is this due to the fact that I updated to ICS with everything that followes.?
Click to expand...
Click to collapse
Hi,
Yes,when updating OTA seems to put 1.27.0000 on your phone.
There is currently no revolutionary support for 1.27.0000
But we are told that it may be arriving soon.
Yes, that is the reason. You should have s-off before upgrading to ICS. What you can do is to extract a ROM from a GB RUU rename it PG58IMG and flash it from bootloader.
It will bring you back to GB and can use revolutionary to s-off, then upgrdade again to ICS.
Thanks alot guys. Think I will wait for that update from the Revolutionairy team though.
Next thing
Just to ask again. Is the only way to S-off and thereby root to do as kualmente posted?
Ruus77 said:
Just to ask again. Is the only way to S-off and thereby root to do as kualmente posted?
Click to expand...
Click to collapse
Actually Revolutionary doesn't support Hboot 1.27 then you cannot use it to s-off.
As said before you can try flashing from bootloader a GB Rom in PG58IMG form and see if it works. If it works (not sure 100% because you are s-on) you will be back to GB with Hboot 1.18 which is supported by revolutionary to s-off.
Try and let me know download. Simply rename it PG58IMG and put on the root of your sd card. Then reboot bootloader while pressing volume down + power button. Follow instruction on screen.
When completed and rebooted, delete PG58IMG from sd card.
Hope it works.
P.S. file is still uploading
Isn't there risk of bricking phone doing this?
Ruus77 said:
Isn't there risk of bricking phone doing this?
Click to expand...
Click to collapse
It won't work anyway. You are s-on and cannot downgrade. You have to wait until hboot 1.27 is supported by revolutionary or the rumored (but completely unproven) new s-off method with the ridiculous name.
Behold_this said:
It won't work anyway. You are s-on and cannot downgrade. You have to wait until hboot 1.27 is supported by revolutionary or the rumored (but completely unproven) new s-off method with the ridiculous name.
Click to expand...
Click to collapse
'ridiculous name'...?
The finnish one?
Cheers, Jp
Thanks. :-( sad that I have to wait though. Were on ARHD on my old Sensation. And really hates the battery time on my new stock one.
Ruus77 said:
Thanks. :-( sad that I have to wait though. Were on ARHD on my old Sensation. And really hates the battery time on my new stock one.
Click to expand...
Click to collapse
Did you try what I suggested in my post #6?
There is no risk to brick. Worst scenario it will fail to update because you are s-on.
Best scenario you will downgrade to GB and proceed to s-off with revolutionary.
At the end this is an official RUU released by HTC and then it cannot be harmful to give a try
kualmente said:
Did you try what I suggested in my post #6?
There is no risk to brick. Worst scenario it will fail to update because you are s-on.
Best scenario you will downgrade to GB and proceed to s-off with revolutionary.
Click to expand...
Click to collapse
Haven't tried since others said it wouldn't work anyhow. Saw the same stated in other threads, regarding similar problems.
Maybe I should try though since it won't brick.
Behold_this said:
It won't work anyway. You are s-on and cannot downgrade. You have to wait until hboot 1.27 is supported by revolutionary or the rumored (but completely unproven) new s-off method with the ridiculous name.
Click to expand...
Click to collapse
Is it this you are referring to? [SOFF] Juopunutbear S-OFF internal testing - HTC Sensation (and XE) 1.23, 1.27 HBoots
hi,
I'm a true noob when it comes to root though i am still trying to do it so i can change this bad asian sensation xe stock ICS Rom.
I updated without knowing I should s-off first
now i understand that i have a few options like waiting for a team to release a hack, or through htcDev but i want to try what kualmente wrote
my problem is that the download link he posted is bad
but i have an official RUU that i downloaded before "RUU_Pyramid_LE_hTC_Asia_TW_1.73.709.4_Radio_10.58.9035.00U_10.15.9035.02_2_release_221625_signed.exe"
I want to know if it is possible to downgrade HBOOT with this and use revolutionary method for s-off?
My file is not bad at all. It is just in PG58IMG format so it can be flashed from the bootloader (running a RUU.exe would give error).
You have a sensation Xe and of course you need a different RUU. Try to find out the way to extract "rom.zip" from the RUU, rename it PG58IMG and flash it from bootloader.
As said before, not sure 100% if it works because of s-on
By the way HtcDev doesn't s-off but just unlock bootloader.
First thanks for answering
kualmente said:
My file is not bad at all.
Click to expand...
Click to collapse
i didn't say the file was bad i said the link was bad. I can't download the file I get "file not found".
kualmente said:
You have a sensation Xe and of course you need a different RUU. Try to find out the way to extract "rom.zip" from the RUU, rename it PG58IMG and flash it from bootloader.
Click to expand...
Click to collapse
how do you do that???
And i think i got the right version because before i updated to ICS i updated to 1.77 via OTA and in the zip file it rights the preious version and it is written there "1.73.709.4 CL177617 release-keys" same as the RUU that i have.
UPDATE: got the rom.zip from my RUU and renamed it. now how do i use it? and what will happen to my phone afterwards? will it be like a factory restore?
if so how can i backup my apps or game saves?
kualmente said:
By the way HtcDev doesn't s-off but just unlock bootloader.
Click to expand...
Click to collapse
someone wrote a TUT about acheving root with S-ON through htcDev
salea656 said:
First thanks for answering
i didn't say the file was bad i said the link was bad. I can't download the file I get "file not found".
how do you do that???
And i think i got the right version because before i updated to ICS i updated to 1.77 via OTA and in the zip file it rights the preious version and it is written there "1.73.709.4 CL177617 release-keys" same as the RUU that i have.
UPDATE: got the rom.zip from my RUU and renamed it. now how do i use it? and what will happen to my phone afterwards? will it be like a factory restore?
if so how can i backup my apps or game saves?
someone wrote a TUT about acheving root with S-ON through htcDev
Click to expand...
Click to collapse
Before you start I repeat: I'm not 100% sure it will work because you are S-On.
1) Rename the rom zip in "PG58IMG" and put in the root of sd card (not inside a folder).
2) Untick fastboot from Settings -Power
3) Pull out and reinsert battery.
4) Power on the phone while pressing volume down + power button to reboot into bootloader.
5) when prompted "do you want to update?" say yes by pressing volume up.
6) If it works, will do its things (it takes a while and screen may goes black a couple of times) just dont do anything and wait untill completed.
7) when completed push power button to reboot.
8) Delete PG58IMG from sd card.
Of course you will lose all data and apps unless you make a backup.
just tried and got
Main Version is older!
Update Fail!
it didn't even ask me if to update or not
any other idea?
i did what you wrote
is there a different version i could try?
I've tried almost everything on the forums, there is no way you will be able to downgrade your 1.27 bootloader. We vill have to wait for someone to hack this loader, before we will be able to try custom roms.
salea656 said:
First thanks for answering
i didn't say the file was bad i said the link was bad. I can't download the file I get "file not found".
how do you do that???
And i think i got the right version because before i updated to ICS i updated to 1.77 via OTA and in the zip file it rights the preious version and it is written there "1.73.709.4 CL177617 release-keys" same as the RUU that i have.
UPDATE: got the rom.zip from my RUU and renamed it. now how do i use it? and what will happen to my phone afterwards? will it be like a factory restore?
if so how can i backup my apps or game saves?
someone wrote a TUT about acheving root with S-ON through htcDev
Click to expand...
Click to collapse
salea656 said:
just tried and got
Main Version is older!
Update Fail!
it didn't even ask me if to update or not
any other idea?
i did what you wrote
is there a different version i could try?
Click to expand...
Click to collapse
Well, you tried at least! If you were S-Off you could downgrade without problems. No other ideas, sorry

[MISC] Flashing ENG HBOOT | Rolling back to S-ON - The Noob Way

Hi all
I noticed that many of us while trying to flash HBOOT's brick our devices as there is no single thread and no single unified noob proof solution for flashing Revolutionary's S-Off 'ed+ Rooted Desire S all the way from HBOOT version 6.98.1xxx to 0.98.2000 (PG8810000).
Hope this helps..
Ok, less talking; more work
This Thread will help you if:
- if you want to change your HBOOT version to 0.98.2000 (PG8810000)
- if you want to S-On your previously S-Off 'ed Desire S as to make use of warranty (as there is no way of making a S-Off device having Revolutionary's HBOOT v.6.98.1002 -to- S-on again without flashing the HBOOT again).
- AFAIK, if you want to flash an RUU (read ROM Update Utility AKA the stock ROM installer) you won't be able to do it you are S-off 'ed using revolutionary method. So for doing that again you need to have the HBOOT version as something like 0.98.xxxx or 6.98.2000 (experts need your comments on this one)
This guide won't be telling you of how to make it S-on again (though theres a link to youtube step-by-step video tutorial of how to do it in the update section below; Do NOT ignore the video's ending ) but just of how you can go ahead with changing your Revolutionary's default flashed HBOOT version 6.98.10xx -to- v.6.98.2000 and then -to- v.0.98.2000 (PG8810000).
For more updated info please refer to "UPDATE" section below:
UPDATE:
Regarding the "Returning to Stock/making your phone S-ON" issue:
ok..I have not tried this but this right here guides you of how to S-ON and return your phone to total* factory like condition by installing an RUU thereby removing just everything..revolutionary, CWM..u name it; just like a real stock phone
But pls note that using an RUU (read ROM Update Utility AKA the stock ROM installer) will erase all your data! as you are flashing a stock RUU
And for this you need to change your HBOOT to 6.98.2000 (PG8810000) (as in the video linked above) OR to 0.98.2000 (PG8810000); so thats one of the other advantages of my guide..
Hope this helps..
Also, a lot of good folks here have been asking/suggesting me over why this method..? and why not the "dd commands method" / adb command(s) method? (all manually )
ok here's my take on this
Click to expand...
Click to collapse
Prerequisites:
- you need an HTC Desire S phone
- HBOOT version 6.98.1xxx (how to check HBOOT version? just read step#4 & step#5 to find out your HBOOT version)
- S-OFF and Root 'ed using Revolutionary (also known as AlphaRevX; its the old name 'duh)
- your data cable and a working PC with HTC Fastboot Drivers installed (get them here)
- make sure you don't have HTC Sync software installed (check it in Add/Remove Programs found in Control panel of your PC); if it is then please remove it before starting with the following process!!!
WARNING:
DO NOT..I REPEAT AGAIN..DO NOT DISCONNECT IN-BETWEEN THE FLASHING PROCESS(Step#6 onwards) OR YOU MAY DAMAGE (READ "BRICK") YOUR PHONE IN A VERY BAD WAY!
Instructions:
1- download and extract the attached zip file in a empty folder (make sure NOT to touch/merge any of its contents)
2- make sure USB debugging is switched "ON" in your phone's: application settings menu >> development settings
3- also make sure that fastboot mode is switched "OFF" in your phone's: Power settings menu and by default your phone is configured to switch to charging mode when the cable is connected (JUST DO NOT CONNECT IT YET)
4- Now, reboot your phone into bootloader mode by first switching off your phone and then press the Power button and the volume down key simultaneously.
5- you should be able to see white screen with things like Revolutionary on top, S-OFF, HBOOT ... 6.98.10xx etc.
6- now go into the fastboot mode and then just connect you phone until the "fastboot" turns into "usb fastboot" OR "fastboot usb" either of these
7- now go inside the extracted folder named "FlashENGHBOOT698"
8- click on bat file named "Click This" and sit back
9- a black screen should popup as soon as you click on the bat [email protected] step#8 and you should see "OKAY" at the end of successful flash but it would be too quick so keep on lookout
10- select reboot on the bootloader's menu
11- reboot back to bootloader's menu to check if HBOOT's version has been changed to 6.98.2000
12- repeat the process from step 8 BUT make sure this time you go inside the other folder named "FlashENGHBOOT098" (notice the ZERO before 98)
13- follow the steps upto step#11 to check if the HBOOT's version has been changed to 0.98.2000 (PG8810000)
Voila!
Note:
This is just a compilation and a slightly edit of the batch file code to flash the second flash Image for the 0.98.2000 HBOOT All credits goes to the following people:
Credits: (Yay!! time for beer)
Would like to thank Maarten for his post and tool here
lgl0 for all his valuable info here
DesireFanatics for his step-by-step tutorial video here
Last but not the least anchemis for sticking and guiding me all the way
And to all those who have helped me here and here.
Disclaimer:
I won't be responsible for any damages done to your phone. Please attempt/flash with caution. though this method has been tested personally by me and is working fine; have also tested rebooting my phone so as to make sure bootloader does not give up on me.
MODS pls sticky this thread as newbie/newcomers really won't get it the first time they look at the [index] @ XDA
And this right here is the solution for Flashing their HBOOTs almost painlessly
Regards,
sky770
- Reserved for future use -
great guide, just have one question, currently I am using reengineered 2.00.002 hboot - 7.00.1002, my phone was s offed by revolutionary, will it work as well?
esideboi said:
great guide, just have one question, currently I am using reengineered 2.00.002 hboot - 7.00.1002, my phone was s offed by revolutionary, will it work as well?
Click to expand...
Click to collapse
:|..*gulp*
ok..as am a newbie so I would be needing experts in here
btw..have you gone through the Index/threads? coz thats what i did
esideboi said:
great guide, just have one question, currently I am using reengineered 2.00.002 hboot - 7.00.1002, my phone was s offed by revolutionary, will it work as well?
Click to expand...
Click to collapse
You have the latest hboot. If you don't want to s-on and unroot your phone again there is no need for you to downgrade the hboot (afaik )
Edit: accidentally pressed thanks.. never mind
sky770 said:
Hi all
I noticed that many of us while trying to flash HBOOT's brick our devices as there is no single thread for flashing Revolutionary's S-Off 'ed+ Rooted Desire S to 0.98.2000 (PG8810000).
Hope this helps..
Ok, less talking; more work
This Thread will help you if:
- if you want to change your HBOOT version to 0.98.2000 (PG8810000)
- if you want to S-On your previously S-Off 'ed Desire S as to make use of warranty (as there is no way of making a S-Off device having Revolutionary's HBOOT v.6.98.1002 -to- S-on again without flashing the HBOOT again).
- AFAIK, if you want to flash an RUU (umm noob translation for this would be original stock ROM?) you won't be able to do it you are S-off 'ed using revolutionary method. So for doing that again you need to have the HBOOT version as something like 0.98.xxxx or 6.98.2000 (experts need your comments on this one)
This guide won't be telling you of how to make it S-on again but just of how you can go ahead with changing your Revolutionary's default flashed HBOOT version 6.98.10xx -to- v.6.98.2000 and then -to- v.0.98.2000 (PG8810000)
Prerequisites:
- you need an HTC Desire S phone
- HBOOT version 6.98.1xxx (how to check HBOOT version? just read step#4 & step#5 to find out your HBOOT version)
- S-OFF and Root 'ed using Revolutionary (also known as AlphaRevX; its the old name 'duh)
- your data cable and a working PC with HTC Fastboot Drivers installed (get them here)
- make sure you don't have HTC Sync software installed (check it in Add/Remove Programs found in Control panel of your PC); if it is then please remove it before starting with the following process!!!
WARNING:
DO NOT..I REPEAT AGAIN..DO NOT DISCONNECT IN-BETWEEN THE FLASHING PROCESS(Step#6 onwards) OR YOU MAY DAMAGE (READ "BRICK") YOUR PHONE IN A VERY BAD WAY!
Instructions:
1- download and extract the attached zip file in a empty folder (make sure NOT to touch/merge any of its contents)
2- make sure USB debugging is switched "ON" in your phone's: application settings menu >> development settings
3- also make sure that fastboot mode is switched "OFF" in your phone's: Power settings menu and by default your phone is configured to switch to charging mode when the cable is connected (JUST DO NOT CONNECT IT YET)
4- Now, reboot your phone into bootloader mode by first switching off your phone and then press the Power button and the volume down key simultaneously.
5- you should be able to see white screen with things like Revolutionary on top, S-OFF, HBOOT ... 6.98.10xx etc.
6- now go into the fastboot mode and then just connect you phone until the "fastboot" turns into "usb fastboot" OR "fastboot usb" either of these
7- now go inside the extracted folder named "FlashENGHBOOT698"
8- click on bat file named "Click This" and sit back
9- a black screen should popup as soon as you click on the bat [email protected] step#8 and you should see "OKAY" at the end of successful flash but it would be too quick so keep on lookout
10- select reboot on the bootloader's menu
11- reboot back to bootloader's menu to check if HBOOT's version has been changed to 6.98.2000
12- repeat the process from step 8 BUT make sure this time you go inside the other folder named "FlashENGHBOOT098" (notice the ZERO before 98)
13- follow the steps upto step#11 to check if the HBOOT's version has been changed to 0.98.2000 (PG8810000)
Voila!
Note:
This is just a compilation and a slightly edit of the batch file code to flash the second flash Image for the 0.98.2000 HBOOT All credits goes to the following people:
Credits: (Yay!! time for beer)
Would like to thank Maarten for his post and tool here
lgl0 for all his valuable info here
Last but not the least anchemis for sticking and guiding me all the way
And to all those who have helped me here and here.
Disclaimer:
I won't be responsible for any damages done to your phone. Please attempt/flash with caution. though this method has been tested personally by me and is working fine; have also tested rebooting my phone so as to make sure bootloader does not give up on me.
Click to expand...
Click to collapse
you have not mentiond the dd commands tut. this is used because of the re engineerd hboot 7.00.1002 upgrade people are doing, u cannot use any other method to get another hboot to your device after using 7.00.1002 hboot. as no fastboot and using the PG88IMG method just gets bypassed. so the only way is the dd commands. please add this to your guide thanks
If i pass your guide, will my phone be s-on or s-off?
Is it possible to apply this hboot version after? Or can i apply this hboot version right now?
Currently im on hboot-6.98.1002.
Hope someone will guide me real quick. Thanks!
@muselmann88 : 1. The bootloader is Eng S-off!
2. You're now with the Revolutionary Hboot and there is no reason to change. As long as you're using the dd commands to directly write the bootloader partition every bootloader can be uploaded. I haven't had any problems with this method.
marioemp2k7 said:
@muselmann88 : 1. The bootloader is Eng S-off!
2. You're now with the Revolutionary Hboot and there is no reason to change. As long as you're using the dd commands to directly write the bootloader partition every bootloader can be uploaded. I haven't had any problems with this method.
Click to expand...
Click to collapse
I read that i'll have boot problems with sense 4 roms, isn't that correct?
Could you please list the dd commands that i'll succeed in writing the bootloader to the partition.
How about other eng hboot?
Sent from my HTC Desire S using XDA
muselmann88 said:
I read that i'll have boot problems with sense 4 roms, isn't that correct?
Could you please list the dd commands that i'll succeed in writing the bootloader to the partition.
Click to expand...
Click to collapse
I have PM you mate i have sent u everything u need to get yourself on the new eng hboot with that new eng hboot u can use ANY Rom without any problems
The hboot version that should be overwritten by "dd" command is 6.98.1002.
All the others are perfectly rewritten by a RUU or PG88IMG with a higher version.
Only Revolutionary (not AlpharevX) hboot has write protection. There is not only version check in that process
Thanks to the OP!
Just got a Desire S and so far done this little lot:
I've downgraded the ROM to 1.28 to get HBOOT 0.98
S-OFF'ed using Revolutionary.
Installed 4EXT Recovery 1.0.0.5 Touch RC3
Flashed VanillaICE ROM
and just followed this guide to get off the Revolutionary HBOOT and to the ENG HBOOT 0.98.2000.
And it worked flawlessly!
Thanks again!
EDIT: and somewhere in that lot I have also updated the radio to the latest one from the Radio thread!
htc-phones said:
you have not mentiond the dd commands tut. this is used because of the re engineerd hboot 7.00.1002 upgrade people are doing, u cannot use any other method to get another hboot to your device after using 7.00.1002 hboot. as no fastboot and using the PG88IMG method just gets bypassed. so the only way is the dd commands. please add this to your guide thanks
Click to expand...
Click to collapse
Hi,
The fastboot method gets bypassed if we try to flash it by directly picking up the *.zip file from SD Card's root (that good 'ol PG88IMG.zip method).
Using the above method (my method at post#1) we are just literally pushing it through fastboot>>adb>>phone to get it flashed.. no questions asked from phone's side
srry abt the newbie/layman terms answer but this is how it actually works
Also regarding, the "dd commands" are never meant to be used for "noobs" as they are quite dangerous...more..more dangerous than to use fastboot instead of directly using adb commands.
Just because dd commands method exist doesn't mean we should go to that extent to brick our phone (a noob can easily do that while sipping beer and typing some command as bik instead of blk)
And hence I would not like newbie(s) coming in here, bricking their phones and stalking me
UPDATE:
Excerpt taken from here
There are actually two levels of S-OFF. The Bootloader (HBoot) and the Radio. Getting S-Off on the HBoot gives us everything we need, but doesn't actually turn off the @secuflag which is set in the radio. What it is possible to do is to flash a HBoot that believes the Radio is set to S-OFF, as the HBoot is responsible for setting that flag. Once the HBoot on the phone is S-OFF, we can write to all the partitions and basically do whatever we want, but it is possible to go one step further. Flashing a radio that is S-OFF and actually setting the @secuflag off gives 100% total access to every part of the phone and it's software, as it becomes network unlocked allowing to you to use any SIM and also allows you to flash a ROM from any carrier (known as Super CID). It also makes it nigh on impossible to permanently loose root no matter what you flash. Once you have radio S-OFF, it makes it much easier to flash new HBoots and ROMs even if you flash something that is locked down tight.
Setting the Radio to S-Off is not necessary, and gaining S-OFF on the HBoot is more than most people will ever need. Radio S-Off is just the last step of the puzzle, but it is worth noting the only points you can permanently brick your phone is flashing a radio or a HBoot, if either of these go wrong you will end up with a shiny expensive paper weight so there is risk involved.
Click to expand...
Click to collapse
So pls pls suggest newbie(s) to flash with caution :|
muselmann88 said:
If i pass your guide, will my phone be s-on or s-off?
Is it possible to apply this hboot version after? Or can i apply this hboot version right now?
Currently im on hboot-6.98.1002.
Hope someone will guide me real quick. Thanks!
Click to expand...
Click to collapse
As it looks to me, if you're running hboot-6.98.1002 already then you must have used revolutionary's tool to S-off your phone.
Therefore you are eligible to use the above guide to re-flash your hboot.
Infact you're having the same hboot version as I had after using revolutionary.
changing your hboot version to 0.98.2000 (PGI880000) will make sure that you can flash any RUU (official stock ROM) so that you could be s-off again
Though I am still getting working on it to have a simple 1-click solution for this too for ya noobs
Also, make sure you're rooted (though I would like some expert to comment on this; but AFAIK root is needed to flash the *.img file over fastboot; just search around forum as to be sure.)
Do it now! and you won't regret..
Regards,
sky770
marioemp2k7 said:
@muselmann88 : 1. The bootloader is Eng S-off!
2. You're now with the Revolutionary Hboot and there is no reason to change. As long as you're using the dd commands to directly write the bootloader partition every bootloader can be uploaded. I haven't had any problems with this method.
Click to expand...
Click to collapse
I would not really recommend using "dd commands" please see my reply over here
Regards,
sky770
muselmann88 said:
I read that i'll have boot problems with sense 4 roms, isn't that correct?
Could you please list the dd commands that i'll succeed in writing the bootloader to the partition.
Click to expand...
Click to collapse
Sense 4 requires you to have umm... HBOOT version 2.xxx and above? (experts?) anyways.. that cannot be categorized as "problem" its just another "prerequisite" for sense 4 based ROMs though am not sure if its an "official prerequisite" or a non official non
Also, please read my post abt dd commands here.
Regards,
sky770
Dreamtheater2003 said:
How about other eng hboot?
Sent from my HTC Desire S using XDA
Click to expand...
Click to collapse
Can take some time here to try some custom(s) ROMs first
Anyways, now that am here on XDA lets get started..
Regards,
sky770
htc-phones said:
I have PM you mate i have sent u everything u need to get yourself on the new eng hboot with that new eng hboot u can use ANY Rom without any problems
Click to expand...
Click to collapse
any ROM?
you sure about RUU (stocks) ??
if yes then plz forward tht PM to me too pls
Regards,
sky770
amidabuddha said:
The hboot version that should be overwritten by "dd" command is 6.98.1002.
All the others are perfectly rewritten by a RUU or PG88IMG with a higher version.
Only Revolutionary (not AlpharevX) hboot has write protection. There is not only version check in that process
Click to expand...
Click to collapse
aha! Right on point
And thats one more reason I won't really..really recommend using dd commands to a noob/newcomers just for flashing from 6.98.10xx -over to-0.98.2000 (PGI880000).
Regards,
sky770

Categories

Resources