Database Info

Rooted Using Kernels from Adrynalyne- Anybody Getting Slow Upload Speeds?

Sorry- I'm new so I can't post in the development section but I'm using the 4.3 versions of Adrynalyne's kernels and I'm getting slower donwload speeds and much slower upload speeds (closer to 500k). When I flashed back to the stock kernel the dl and upl speeds went back to normal. Anybody else getting this?

thechopster said:
Sorry- I'm new so I can't post in the development section but I'm using the 4.3 versions of Adrynalyne's kernels and I'm getting slower donwload speeds and much slower upload speeds (closer to 500k). When I flashed back to the stock kernel the dl and upl speeds went back to normal. Anybody else getting this?
Click to expand...
Click to collapse
Kernel has absolutely nothing to do with your network speeds. That was likely a fluke.
Network speeds are affected by a number of things-signal strength and network congestion being the biggest factors.
Do several tests different times of day and you will see that 3g can vary from 30 to 2100 kbps download speeds. As for 4g.. Idk what typical speeds are, but it will have a similar range.
via Incredible Redemption

Thanks AdhvanIt for the response but I tried testing them within minutes of flashing kernels and did numerous tests. With stock kernel I was getting about 8-12mbs donwloads and believe it or not upwards to 25+ mbs uploads (and that's consistently) while with the Adrynalyne's ROMS (using different versions- a-c) I was getting about 3-6 mbs downloads and 1-2 mbs uploads. Granted 3-6 is good enough but the disparity between 3-6 and 8-12 for uploads and 2 and 25 is quite a difference. You mention that kernels have nothing to do with speed but I was wondering if undervolting has any effect on the radio? Is anybody else having donwload/upload issues?

The upload speeds on the speed test app are completely wrong. If anything, the Adrynalyne kernel brought it closer to what it should be. Tether the internet from your phone to your computer, then go to the speed test web site. That'll show you what it should be.

Tried tethering (which always seems slower) and got the same results with the 4.a - 4.3 kernels. If anybody is trying this kernel are you getting the same results? I really love this kernel and Adrynalyn's work is always top notch. I don't know if this is just my phone with maybe a bad radio?

that has to be the kernel.. check for updates... or try somthing different.

Paulb787 said:
that has to be the kernel.. check for updates... or try somthing different.
Click to expand...
Click to collapse
Has to be?
I'm all ears on the explanation of why it has to be.

Hi Adrynalyn. First, thanks for all of the work and time you put in. I can't post in the development thread or otherwise I would have posted this thread there. Also, thanks for checking in on the thread. Is it just my experience with the download speed using the 4.3 kernels? Thanks!

Im using his 4.3b and my speeds are fine. All his kernals have done well for me. As stated above 4g speeds should be around 7-12down and 4-6up. At least in NY that is the usual besides some slighty higher numbers once in a while.
I would redownload and try flashing again. Are you using rom manager to flash or going into recovery. I have done both and it seems fine...

Not to jack the thread... but
I am new and can't post in the dev section yet. Adrynalyn, just wanted to express my gratitude for all your hard work!!! Tried a couple other ROM's, but just LOVE yours and came back within minutes of each experience...

In my strongest 4g LTE area I get 15/5 pretty regularly on adryns kernels and from what I understand thats all your really sposed to be seeing...

Thanks to you guys for responding- it looks to be unique to my situation then. I'm flashing via recovery. Would that make a difference? I'm in San Jose and I had been getting incredible upload speeds- frequently hitting above 30mbs. My donwloads have always been lower but flashing with these kernels I haven't been able to duplicate. Maybe it's because I'm using the stock but rooted ROM? Jrocker23- are you using the stock rom, too?

Yes, all I did was root via adb and added Adranalyne's kernals. Im running .06 stock. Also flashing from recovery should work fine. Are you using setcpu or running with the stock kernal speed?

thechopster said:
Thanks to you guys for responding- it looks to be unique to my situation then. I'm flashing via recovery. Would that make a difference? I'm in San Jose and I had been getting incredible upload speeds- frequently hitting above 30mbs. My donwloads have always been lower but flashing with these kernels I haven't been able to duplicate. Maybe it's because I'm using the stock but rooted ROM? Jrocker23- are you using the stock rom, too?
Click to expand...
Click to collapse
Funny you say this because I am in the San Jose area and before would hit 15-30mbs and now with adryns~ 4.3a kernel I get only 3/1mbs @ speakeasy website. This is rather weird.. Let me try a different kernel and report back with speeds.

Smok3d-
I'm also from the San Jose area. I was getting blazing uploads but now I can't get it over 2mbs. Something to do with our area's towers? Smok3d- could you revert back to the stock kernel? I did and was getting the regular speeds- I wonder if that's it too?

Ok there is definitely an issue going on here with kernels and speeds.
I was using Teslacoil with the included kernel and my speed in 3G area was snappy, when running speed tests I'd consistently get around 1.5 meg.
Yesterday i flashed the latest Virus rom with recommended Ziggy BFS kernel, and i almost automatically noticed my speed was running considerabley slower. When running a speed test, I'd get only around 100 KB down.
So today, i flashed the latest Virus rom again but this time i flashed Imoseyon normal lean kernel on it and now my speeds are back to 1.5 MB.
Now i know that speed tests are not accurate when run from the phone itself, however, the difference in speed is so dramatic that you don't even need to run a speed test to notice it right away.
Sent from my Thunderbolt using Tapatalk

thechopster said:
Smok3d-
I'm also from San Jose area. I was getting blazing uploads but now I can't get it over 2mbs. Something to do with our area's towers? Smok3d- could you revert back to the stock kernel? I did and was getting the regular speeds- I wonder if that's it too?
Click to expand...
Click to collapse
*edit nvm, wifi was on. The problem is adryns kernel, speeds are blazing fast on drods kernel, 20+mbs now
*

Smok3d said:
*edit nvm, wifi was on. The problem is adryns kernel, speeds are blazing fast on drods kernel, 20+mbs now
*
Click to expand...
Click to collapse
And what is it with adrynalyne kernel that is the problem? I would love to know. I'm running it and my real speeds are great. You are running speed tests, bet if you didn't you wouldn't even notice the speed. Just because you are getting a certain speed from a TEST doesn't mean you will get the same in real world performance. Do research or provide facts before you make statements you can't back up
Sent from my ADR6400L using XDA App

g00s3y said:
And what is it with adrynalyne kernel that is the problem? I would love to know. I'm running it and my real speeds are great. You are running speed tests, bet if you didn't you wouldn't even notice the speed. Just because you are getting a certain speed from a TEST doesn't mean you will get the same in real world performance. Do research or provide facts before you make statements you can't back up
Sent from my ADR6400L using XDA App
Click to expand...
Click to collapse
L00k above at my post... I automatically noticed my speed was considerably slower before even running a speed test. Then i change kernels, and its magically back to normal.
I'm no dev, so i couldn't begin to explain what in the kernel would cause it. And just because you aren't experiencing the issue doesn't mean it doesn't exist for others. Who knows? Maybe it was just a bad flash or CWR didn't clean cache properly before flashing, anything is possible, but we should work together to bring resolution to issues that arise, even if it is just happening to some...
Sent from my Thunderbolt using Tapatalk

g00s3y said:
And what is it with adrynalyne kernel that is the problem? I would love to know. I'm running it and my real speeds are great. You are running speed tests, bet if you didn't you wouldn't even notice the speed. Just because you are getting a certain speed from a TEST doesn't mean you will get the same in real world performance. Do research or provide facts before you make statements you can't back up
Sent from my ADR6400L using XDA App
Click to expand...
Click to collapse
I was pointing out what I noticed, I am no dev, just pointing out what I noticed when on adryns kernel compared to other kernels. It might not lag, but i notice the difference.

Unusual LTE speeds EP1f nameless kernel

Hey, just seeing if anyone has a fix for this. I am using the new nameless rom and it is amazing BUUUUTTTT my data speeds are only about 5mbps when I was getting 26mbps prior. I switched back to straight stock and it still is slower than I would like. Any advice on what I can do?

I have heard on a couple of threads that the speedtest.net app doesn't work right with this leak. Try using the speak easy website and do a speed test off that to see if your speeds change at all
Also this probably should be in the general section not the development section.

I've never pulled speeds that high I'm stuck st five and there a lte coverage throughout my whole city???
Sent from my SCH-I510 using XDA App

yeah, I've been quite spoiled I want it baaaaacccckkkkk lol!

Like stated above...the speedtest app is not something to go by on these gingerbread leaks. They are inaccurate (by a lot).

I'm on froyo
Sent from my SCH-I510 using XDA App

Not to say that you are wrong, but the kernel itself won't effect your data speed. If 4G turns on and is functional in the sense that you are able to use the 4G network, then the kernel is working as it should. It's possible that your area put a cap on the speed you were seeing, and now you are not seeing it. However, if you flash another kernel and are back up to the speed you were seeing, then I will definitely investigate.

navenedrob said:
Not to say that you are wrong, but the kernel itself won't effect your data speed. If 4G turns on and is functional in the sense that you are able to use the 4G network, then the kernel is working as it should. It's possible that your area put a cap on the speed you were seeing, and now you are not seeing it. However, if you flash another kernel and are back up to the speed you were seeing, then I will definitely investigate.
Click to expand...
Click to collapse
I'm with him. Radio/modem would affect data speed, not kernel.

Has anyone tried the EE4 radio's I released yesterday?

I have read everywhere that 2.3.4 does not like speedtest

Kudos to this thread not getting roasted. I'm jealous. Especially in the development section.

Sorry, I put a new last night. The ep1h radio. I am going to try Kejar's EE4 radio tonight and hopefully that will fix it!!!

The EP1H radio will fix your problem and you'll be able to keep the GB leak, as you can flash the EP1H radio-only via Odin.

kejar31 said:
Has anyone tried the EE4 radio's I released yesterday?
Click to expand...
Click to collapse
I havent yet, but it is on my list of todo's for today

kejar31 said:
Has anyone tried the EE4 radio's I released yesterday?
Click to expand...
Click to collapse
I have been running it all day and it's been working just fine. No more static when I receive phone calls. Thanks a ton for the EE4 radios.
Speedwise, running speed test from speedtest.net from my labtop via wireless tether, I'm seeing speeds of 10Mbps down and 1.3Mbps up. The speed differences for me in my area are the same from both the ep1h and ee4 radios. I ran 5 sets of test for each radio to the same server.
-GummyCharged 1.8 EP1H kernel with EE4 radios
Sent from my SCH-I510 using XDA Premium App

asenduk said:
I have read everywhere that 2.3.4 does not like speedtest
Click to expand...
Click to collapse
I didn't mean that gingerbread in general i just meant it seamed off using the speedtest app in these leaks. When i used the website i always averaged 3 or 4 extra mps down and about .5 to 1 mps up. I even used the same servers on both of them. I also heard the same for others but when i compared the website speed for the leaks to the speedtest app of froyo(EE4) they usually matched each other. So i have just been blaming the app for the mix up.

[Q] Fixing the Droid Charge Mobile Network problem

I've tried several different ROMs, as well as several different battery saving apps, but I keep running into the same problem with my Droid Charge - after a certain amount of time with the mobile network off, it will not turn back on without either a restart or a toggle of airplane mode. There has to be a bug in the software design, as the same issue occurs with Greenpower, Juice Defender, 2x, and Tasker. I've been on stock, Humble ROM, and am currently on Eclipse, but none of these ROMs have fixed this issue.
Are there any developers out there who can fix this issue? I get almost 20 hours of battery life when I use Juice Defender (compared to about 7 hrs without it), but I can't keep restarting my phone and toggling airplane mode in the middle of the day.
Any suggestions or fixes? I know that many are experiencing the same issue, but it never seems to get addressed.

You're more likely to get an answer to your question if you post it in the correct section -- development is for releases and tutorials; Q&A goes in General (see http://forum.xda-developers.com/showthread.php?t=1074281).

From what I have read, you cant really use Juice Defender or other similar apps with the charge. For some reason, when those apps turn off the radio, it won't always come back on. Sometimes a reboot fixes it and sometimes not.
This is a radio issue so I don't think a rom can fix it. I tried Juice with EE4 and it worked if you did not disable the radio but battery savings is almost non-existent. I have not tried it on EP1Q though. I am lucky to get 10 hrs on my battery.

ellisz said:
From what I have read, you cant really use Juice Defender or other similar apps with the charge. For some reason, when those apps turn off the radio, it won't always come back on. Sometimes a reboot fixes it and sometimes not.
This is a radio issue so I don't think a rom can fix it. I tried Juice with EE4 and it worked if you did not disable the radio but battery savings is almost non-existent. I have not tried it on EP1Q though. I am lucky to get 10 hrs on my battery.
Click to expand...
Click to collapse
I've had good results running Juice Defender with 3G where the radio comes back pretty much all the time. 4G doesn't fair nearly as well, not coming back about 30% of the time.
I tend to use 3G most of the time, only switching to 4G when I need the insane speed (tethering or Netflix watching). The battery life is much better.

muness said:
I've had good results running Juice Defender with 3G where the radio comes back pretty much all the time. 4G doesn't fair nearly as well, not coming back about 30% of the time.
I tend to use 3G most of the time, only switching to 4G when I need the insane speed (tethering or Netflix watching). The battery life is much better.
Click to expand...
Click to collapse
Which radio are you using? EE4? or EP1Q?
As far as EE4 goes, I also agree that JuiceDefender is too inconsistent to run since the data always drops out. However, when I ran the full EP1F/EP1H (I forgot which one I flashed to) GB leak awhile back just to try out, JD was actually working quite well to at least a 90% consistency in restoring data after unsleeping my phone. Unfortunately with all the other bugs going on with the GB leaks I reflashed back to EE4, and now I've flashed to the EP1Q modem only. I've yet to try JD with the EP1Q modem, but I'll give it a try later today.

Wait, we can use the EP1Q radios with an EE4 rom?
Sent from my Droid Charge running GummyFroyo 1.9.1

kvswim said:
Wait, we can use the EP1Q radios with an EE4 rom?
Sent from my Droid Charge running GummyFroyo 1.9.1
Click to expand...
Click to collapse
yes you can modems are independent to ROMs and kernels

vi3tboiii54 said:
yes you can modems are independent to ROMs and kernels
Click to expand...
Click to collapse
I always thought there would be compatibility issues...doing that ASAP.
Sent from my Droid Charge running GummyFroyo 1.9.1

kvswim said:
Wait, we can use the EP1Q radios with an EE4 rom?
Sent from my Droid Charge running GummyFroyo 1.9.1
Click to expand...
Click to collapse
Here's the [EP1Q] radios: http://forum.xda-developers.com/showthread.php?t=1215167
Also there are no compatibility issues by far, I'm still running Humble's 1.51 EE4 ROM with imoseyon's 0.13.3 kernel and it runs beautifully.

hiien said:
Here's the [EP1Q] radios: http://forum.xda-developers.com/showthread.php?t=1215167
Also there are no compatibility issues by far, I'm still running Humble's 1.51 EE4 ROM with imseyon's 1.33 kernel and it runs beautifully.
Click to expand...
Click to collapse
Where can I find that kernel? And do u prefer it over imnuts?
Sent from my SCH-I510 using XDA Premium App

adlzian said:
Where can I find that kernel? And do u prefer it over imnuts?
Sent from my SCH-I510 using XDA Premium App
Click to expand...
Click to collapse
https://twitter.com/#!/imoseyon
Scroll down a bit on his twitter feed and you'll find it. Be sure you download the correct 0.13.3 version since 0.13.5 is unstable and will cause bootloops on your phone.
The only instance I've run into issues so far with is music streaming. It seems my GMusic and Pandora will randomly have popping sounds while streaming music. It's nothing too major for me but just in case anyone was wondering why they could be getting it.

Thanks. Should I go with his or imnuts? Just wanna know if there's a big difference between the two like speed an battery life...
Sent from my SCH-I510 using XDA Premium App

adlzian said:
Thanks. Should I go with his or imnuts? Just wanna know if there's a big difference between the two like speed an battery life...
Sent from my SCH-I510 using XDA Premium App
Click to expand...
Click to collapse
You will score higher in Quadrant with imoseyon's kernel although that's kind of meaningless. Some people swear they notice significant speed increases, but I haven't noticed anything. As for battery life...they're about equal.
Sent from my Droid Charge running GummyFroyo 1.9.1

ellisz said:
From what I have read, you cant really use Juice Defender or other similar apps with the charge. For some reason, when those apps turn off the radio, it won't always come back on. Sometimes a reboot fixes it and sometimes not.
This is a radio issue so I don't think a rom can fix it. I tried Juice with EE4 and it worked if you did not disable the radio but battery savings is almost non-existent. I have not tried it on EP1Q though. I am lucky to get 10 hrs on my battery.
Click to expand...
Click to collapse
Can anyone confirm whether the EP1Q Radio makes any difference with the Juice Defender mobile network issue? I don't want to go to the hassle of switching radios unless this fixes the issue.

hiien said:
Which radio are you using? EE4? or EP1Q?
As far as EE4 goes, I also agree that JuiceDefender is too inconsistent to run since the data always drops out. However, when I ran the full EP1F/EP1H (I forgot which one I flashed to) GB leak awhile back just to try out, JD was actually working quite well to at least a 90% consistency in restoring data after unsleeping my phone. Unfortunately with all the other bugs going on with the GB leaks I reflashed back to EE4, and now I've flashed to the EP1Q modem only. I've yet to try JD with the EP1Q modem, but I'll give it a try later today.
Click to expand...
Click to collapse
I'm on EE4. I'd be curious to hear if EP1Q makes a difference. Please let everyone in this forum know.

Im on EP1Q modem and I installed JD back on but it still doesnt work with 4G. On the other hand with 3G it seems to work if im in the same area for some time but when im going from city to city the mobile data enabling is still an issue.

[Q] [Poll]Which Modem is Giving You the Best Service?

Trying again with the missing modems!
Just curious what everyone is using. There are a few modem threads already, but i thought this would simplify things. Please comment regarding your location. Thanks!
Edit -> Gawdammit! The last UCKJ1 is supposed to be UCKH1!
I hope i didn't miss any this time. If i did its probably not a very good one.

ameza001 said:
Trying again with the missing modems!
Just curious what everyone is using. There are a few modem threads already, but i thought this would simplify things. Please comment regarding your location. Thanks!
Edit -> Gawdammit! The last UCKJ1 is supposed to be UCKH1!
I hope i didn't miss any this time. If i did its probably not a very good one.
Click to expand...
Click to collapse
Huh about the uckj1 and uckh1?
Sent from my SGH-I997 using XDA App

I would vote and add a reply with a location status, that way members can get the best modem for the area.

KJ2 modem, Infused v2.2.3, Infusion GB 1.1 Kernel, Acid Tweaks. Pittsburgh/Western PA Area. Averaging 5 Mb up, 1.2 Mb down on "4g"

Ok so i was told chaning my modem could potentially give me better reception?? How do i go about changing this? I am rooted and currently running Infused 1.6

rumdada said:
Ok so i was told chaning my modem could potentially give me better reception?? How do i go about changing this? I am rooted and currently running Infused 1.6
Click to expand...
Click to collapse
Wrong place to ask this, head over to the Q&A forum.

rumdada said:
Ok so i was told chaning my modem could potentially give me better reception?? How do i go about changing this? I am rooted and currently running Infused 1.6
Click to expand...
Click to collapse
1.Read everything in this thread
http://forum.xda-developers.com/showthread.php?t=1293751
2.downlodad your favorite modem via that thread.
3.flash using Clockwork Mod Recovery

BTW, i'm in Houston, data speeds suck here w/ all modems.

KJ2 gave me the best speeds at my home, but bad signal and speeds at school.
KJ4 gives me good speeds at home and great signal, but it also gives amazing speeds at school and amazing signal.
So KJ4 is the best for me, since I don't need 4G at home, I have wifi.

Eastanollee, (Stephens Co.) Georgia Community V8 Kernel, stock 2.2.1 rom
UCKH1 = crap signal, and bad battery life due to it?
Its worse than my old iPhone 4.
Gonna try KJ* and see how those do, but anyone near Northeast GA on here have any info?

KJ4 for me. I'm in Fort Worth using Infused v2. And as I stated in a previous post my battery life increased after installing it.
Sent from my SAMSUNG-SGH-I997 using xda premium

chicago suburbs here, H1 is working the best for me

Modem UCKJ4
Guys I have tried all the modems now and the UCKJ4 has the been the most stable for and decent connections for me. This is also the latest modem released as well.

bbayless said:
Guys I have tried all the modems now and the UCKJ4 has the been the most stable for and decent connections for me. This is also the latest modem released as well.
Click to expand...
Click to collapse
UCKJ4 is also the best for me. Only problem is the 160 character text limit when it fails. I have to send a lot of long texts so it's hard for me to use that, haha. I went back to UCKI3 and it's not too bad, but the latest is definitely the best.
Sent from my SAMSUNG-SGH-I997 using xda premium

Loving the new uckj5
Sent from my SAMSUNG-SGH-I997 using XDA App

Best battery - Good signal - Good speeds - KI3
Average battery - Good signal - Best speeds - KK1

Great speeds for me on kk2 best so far going to use it for a few days to see about the battery.

i wish i could update the poll to include the newer modems...

KK1
KK2 using Richmond, VA server works best in the VA area but has issues with text character amount. Best well rounded modem in the area is KK1

I haven't done any speed tests, but judging on signal strength and battery life alone:
Running Galnet MIUI, KK3 gives me the best signal and battery life.
Running Samsung ROM's, KI3 gives me the most consistent signal.

All Infuse modems individually packed into CWM flashable packages -- added LB3

All Infuse modems individually packed into CWM flashable packages (old at top and new at bottom):
* CWM-UCKI3
While flashing it says KE3, but after flashing check in settings, and it would say KI3.
* CWM-UCKI4
* CWM-UCKJ1
CWM-UCKJ2
CWM-UCKJ3
CWM-UCKJ4
CWM-UCKJ5
SGS CWM-UVKH1
SGS CWM-UVKH2
SGS CWM-UVKJ6
* CWM-UCKK1
(Has better signal and speeds than KI3, at the cost of significantly higher battery drain.)
* CWM-UCKK2
* CWM-UCKK3
* CWM-UCKK4
(Has signal and speeds on par with KI3, maybe slightly better too, for me, and battery drain is on par with KI3. I hardly use GPS, so didn't test it.)
* CWM-UCKL2
(Amazing battery life, and getting best speeds so far compared to any modem. GPS has a dead lock on and beautiful accuracy.)
* CWM-UCLB1 (14 Feb 2012) Observations
Stolen from dman's post. So all credit goes to him. Read on the same thread where I stole modem from that this modem does not have the 160 char limit for SMS.
* CWM-UCLB3 (29 Feb 2012 - date I added) Observations
Confirmed by Simba501 in post 195 below that this modem does not have the 160 char limit for SMS.
Will add more as they come in...
*** DATA USAGE ALERT: Too many speed tests would eat into your data plan without you realizing that. Each test with download speeds at ~5-7 Mbps and upload speeds at ~1-2 Mbps takes about 20 MB per test. You have been alerted. ***
* 4 hour clock jump NOT present with date and time set to auto update from network as observed on my phone.

Thanks for UCKJ5. I love running the latest releases whenever they are available.

k-semler said:
Thanks for UCKJ5. I love running the latest releases whenever they are available.
Click to expand...
Click to collapse
Try UCKK1. Its the latest, and link is towards the bottom.

Thanks!! Will do!!
---------- Post added at 09:54 PM ---------- Previous post was at 09:43 PM ----------
Initial Results with SpeedTest:
Download:7.68 Mbps
Upload 1.91 Mbps
Location: Pullman WA, (north side, district of the port of Whitman.
Signal Strength: 61%
Network strength: -93DBl
Network Type HSDPA+
Tower: 8365106 LAC 42983

k-semler said:
Initial Results with SpeedTest:
Download:7.68 Mbps
Upload 1.91 Mbps
Location: Pullman WA, (north side, district of the port of Whitman.
Signal Strength: 61%
Network strength: -93DBl
Network Type HSDPA+
Tower: 8365106 LAC 42983
Click to expand...
Click to collapse
Are you getting the 4 hour clock moving ahead issue with date and time settings set to auto? How about GPS? I got better speeds, no clock moving ahead issue, and GPS too works pretty good.

The time is accurate, and there is no problem with that, GPS gets a lock in 3 miniutes when I'm sitting inside my 2nd floor apartment next to the window. I think that's pretty good that I can get a GPS lock inside.

diablo009 said:
All Infuse modems individually packed into CWM flashable packages (old at top and new at bottom):
* CWM-UCKI3
* CWM-UCKI4
* CWM-UCKJ1
CWM-UCKJ2
CWM-UCKJ3
CWM-UCKJ4
CWM-UCKJ5
SGS CWM-UVKH1
SGS CWM-UVKH2
* CWM-UCKK1
Will add more as they come in...
* 4 hour clock jump NOT present with date and time set to auto update from network as observed on my phone.
Click to expand...
Click to collapse
where did u get kj3 and kj5?? those roms were never made?

JordanElliott said:
where did u get kj3 and kj5?? those roms were never made?
Click to expand...
Click to collapse
I think I found them over in Galaxy S section. They work on infuse too.

Oh sweet. Any word on KK2?
Also, anyone try the SGS modems? Do they work well? Would SGS2 modems work on the infuse?

jwl12345 said:
Oh sweet. Any word on KK2?
Also, anyone try the SGS modems? Do they work well? Would SGS2 modems work on the infuse?
Click to expand...
Click to collapse
I did . All modems I listed are only after I tried them.
I got the 4 hour clock jump when set in auto update mode. If you are comfortable with time in manual mode, you could try all the modems, including SGS ones.

Would like to try out k2 anyone got .zip?
Sent from my blacked out infuse

jmatt78 said:
Would like to try out k2 anyone got .zip?
Sent from my blacked out infuse
Click to expand...
Click to collapse
Let me know if you can find KK2. I'll update it too here.
---
Found a dump. Checking out KK2 before posting it here. Didn't work. Didn't recognize sim.

T959VUVKH1 gets mad fast speeds here in NY...

Same here Miami
Infuse

diablo009 said:
Let me know if you can find KK2. I'll update it too here.
---
Found a dump. Checking out KK2 before posting it here. Didn't work. Didn't recognize sim.
Click to expand...
Click to collapse
Found KK2 modem I think. Posting it here. Any adventurous person can try it out and let me know. I made this CWM flashable zip with the modem from KK2 rom.
Please download your current modem too to revert back in case this one does not work. After flashing please check settings-->about to verify its KK2 modem in there.
KK2 modem - untested by me
Updated OP with KK2

Running KK2 with no problems so far. GPS is still ****, signal seems better, no idea on battery effects.
Sent from my SGH-I997 using XDA App

eX_675 said:
Running KK2 with no problems so far. GPS is still ****, signal seems better, no idea on battery effects.
Sent from my SGH-I997 using XDA App
Click to expand...
Click to collapse
Thank you. I just flashed on mine when no one replied. It works
Sent from my SAMSUNG-SGH-I997 using XDA App

Thanks, will flash it tonight and see how it does over night. Ive been using kk1 and it works best for me.
Sent from my SGH-I997
UPDATE EDIT: So far tested and getting constant 4MB down but only .5 up. From my home I usually get 2-3MB down. I get 4MB down at work where I get better signal. Ill update tomorrow morning.
Oh yeah forgot to add, I locked on GPS in 1.5 seconds =oP

chrscap said:
Thanks, will flash it tonight and see how it does over night. Ive been using kk1 and it works best for me.
Sent from my SGH-I997
Click to expand...
Click to collapse
Am back to KI3. KK1 was awesome in all aspects except that it had higher battery drain in standby.

I noticed drain too on K1, gonna flash K2 tonight and charge it overnight then try it tomorrow.