Database Info

SETCPU wont stick!

everytime i try to set the cpu to 528 max and min it keeps reverting back to 528 max 480 min

The cpu speed controls are locked in the compiled kernel, without the source-code we cannnot unlock it. Remind HTC of their obligations via the GPL license...

bobdude5 said:
everytime i try to set the cpu to 528 max and min it keeps reverting back to 528 max 480 min
Click to expand...
Click to collapse
Ive tried this as well with the same result, my conclusion is that setcpu simply doesn't work on the hero. I know it has that menu where you can choose the phone you have(no hero in it).

obelisk79 said:
The cpu speed controls are locked in the compiled kernel, without the source-code we cannnot unlock it. Remind HTC of their obligations via the GPL license...
Click to expand...
Click to collapse
Not sure how we could press this issue, but it is becoming a nuicasance and violates the sheer meaning of the phone.
Free speech, not free beer. :-/
"...users have the four essential freedoms:
The freedom to run the program, for any purpose (freedom 0).
The freedom to study how the program works, and change it to make it do what you wish (freedom 1). Access to the source code is a precondition for this.
The freedom to redistribute copies so you can help your neighbor (freedom 2).
The freedom to improve the program, and release your improvements (and modified versions in general) to the public, so that the whole community benefits (freedom 3). Access to the source code is a precondition for this.... " www.gnu.org
If anyone who has not read or studied GNU/GPL http://www.gnu.org/licenses/gpl.html read it and research it. We are being screwed here.

The new SetCPU 1.4.2 works fine on my hero, I've tested it by setting both to 528mhz refreshing it, checking set on boot, rebooting it and it's still 528 min/max
There's a new Hero profile in 1.4.2

So complete curisoity here, does this thing really help? anyone done a time trial of sorts?

Still isnt sticking for me. I am running a stript down ROM, would that affect it?

nelson8403 said:
The new SetCPU 1.4.2 works fine on my hero, I've tested it by setting both to 528mhz refreshing it, checking set on boot, rebooting it and it's still 528 min/max
There's a new Hero profile in 1.4.2
Click to expand...
Click to collapse
I have personally spoken to the dev about getting it going and this application will not work on our phones until we can modify the kernel and remove it's ability to control the cpu. The gsm hero is capable of using it because they have their kernel, not the cdma hero.

flipzmode said:
I have personally spoken to the dev about getting it going and this application will not work on our phones until we can modify the kernel and remove it's ability to control the cpu. The gsm hero is capable of using it because they have their kernel, not the cdma hero.
Click to expand...
Click to collapse
I guess we can say the numbers will show up, but it won't actually do anything???

[MOD] IncrediControl - Easy GUI Undervolting

Please read this post through thoroughly before downloading.
This app allows you to control your CPU voltages with an easy to use interface. You can increase or decrease voltages (undervolt or overvolt) for all frequencies or fine tune voltages for each individual frequency.
! HTC DEVICES, currently only single core devices are supported !
! ROOT is Required !
! Kernel that supports HAVS or SVS voltage adjustment REQUIRED !
Get it over at http://www.incredikernel.com
IncrediControl is now also available in the market:
IncrediControl
IncrediControl - Ad Free
Additionally, all donators are eligible to receive the Ad Free version. It doesn't matter how much or how little you donate or have donated. If you don't want to purchase the app from the market, you may donate using the button on this page. Please register on the site first and include your username in the comments box.
All previous donators, please register on the site if you have not done so and contact me with your username!
NOTE: The settings in the general tab are only functional in kernels that have implemented the simple sysfs interfaces for usb fast charging and audio boost. If you toggle them, its not going to break anything, but they won't work and the app may crash. If you would like your kernel dev to implement the interfaces, please direct them to these two commits:
https://github.com/Chad0989/android_kernel_common/commit/a7c21fa0391c225900f93960362535179c0cecc9
https://github.com/Chad0989/android_kernel_common/commit/41dc138bae23dc7582de72a4d9895aaa8e1f8b2d
NOTE2: It is a requirement of the HAVS adjustment that the kernel you are using has the HAVS sysfs interface implemented. If it does not, it will not work.
NOTE3: Before using, please delete any boot scripts you may have in /etc/init.d that toggle any of the settings this app controls.
Get it at http://www.incredikernel.com
Restore script - use this if you went too low and find yourself in a boot loop. Flash through recovery:
http://www.incredikernel.com/?p=229

Hi,
Good job, just one thing, i use Eviollet kernel (svs) and there's a step at 128 mhz.
The apps doesn't show these step.
It Would be great if you can implement it.
Otherwise i found no bug.
Thx in advance.

sffmandrake said:
Hi,
Good job, just one thing, i use Eviollet kernel (svs) and there's a step at 128 mhz.
The apps doesn't show these step.
It Would be great if you can implement it.
Otherwise i found no bug.
Thx in advance.
Click to expand...
Click to collapse
The app skips the first frequency because on a lot of phones its a.useless frequency like 19mhz. Thanks for letting me know though. I will add an exception and upload a new version later.
Sent from my ADR6300 using XDA App

7/31/11 - Preview 5-4
Minor change to no longer skip the first frequency. On many phones the first frequency is a useless frequency like 19mhz so the app was set up to skip that frequency. This is only a temporary fix until I change it to display only the available frequencies instead of all of them.

Sounds interesting, will have a go

Hi,
Thx chad0989, now it works at 128 mhz

sffmandrake said:
Hi,
Thx chad0989, now it works at 128 mhz
Click to expand...
Click to collapse
Great. I just sent you a PM.

Works great thanks!

IncrediControl v1.0!
This app allows you to control your CPU voltages with an easy to use interface. You can increase or decrease voltages (undervolt or overvolt) for all frequencies or fine tune voltages for each individual frequency.
! HTC DEVICES, currently only single core devices are supported !
! ROOT is Required !
! Kernel that supports HAVS or SVS voltage adjustment REQUIRED !
Get it over at http://www.incredikernel.com
IncrediControl is now also available in the market:
IncrediControl
IncrediControl - Ad Free
Additionally, all donators are eligible to receive the Ad Free version. It doesn't matter how much or how little you donate or have donated. If you don't want to purchase the app from the market, you may donate using the button on this page. Please register on the site first and include your username in the comments box.
All previous donators, please register on the site if you have not done so and contact me with your username!

Good job. Works on cm7 nightly with manU kernel 2.1.1.

chad0989 said:
The app skips the first frequency because on a lot of phones its a.useless frequency like 19mhz.
Click to expand...
Click to collapse
The eviollet Kernel implements AXI @ 128Mhz, which drops the bus down to 19Mhz which potentially could save more battery

rootSU said:
The eviollet Kernel implements AXI @ 128Mhz, which drops the bus down to 19Mhz which potentially could save more battery
Click to expand...
Click to collapse
But the actual cpu speed still never drops below 128mhz if I'm not mistaken (at least thats how it is on the inc, its possible to enable the use 19mhz cpu speed, but the phone is unusable). So the cpu voltage for 19mhz would never be used. I have changed the app now though to show all cpu frequencies available for use, so if you did enable the use of 19mhz cpu speed (you have to comment out a line in the acpuclock file), it would show up.
Hopefully that clears up confusion.

IncrediControl v1.3
Major changes include:
Ad Free has now been turned into a key that removes the ads from the free version. This allows donors who have downloaded the ad free version from the site to update through the market.
HAVS voltage checking. Minimum voltages can no longer be set higher than maximum voltages.
Boot voltages are now stored in the application’s data directory. Boot settings will now persist if you update your ROM or restore the application and data from a backup.

IncrediControl v1.4:
This is mostly a bug fix release but I have also added:
Automatic detection of the minimum and maximum voltages supported by your kernel
Unless any more bugs arise, the next release will have some new goodies to play with...
http://www.incredikernel.com or from the market.

I'm making an enquiry for a friend who uses his HTC desire with RCMix S v2.0 Evolutionary Sense using SNQ v05 kernel. Does this Rom / kernel meet the InvrediControl system requirements?
One other question, in other utils I've used in the past they also supply a "reset" zip which can be used to revert the settings back to default in the event if instability/freeze (requires flash from recovery). Do you see value in creating a similar zip for over agressive UV?
Thanks again for a wonderful utility. Can't wait to try it.
Sent from my Desire HD using XDA App

fidoedidoe said:
I'm making an enquiry for a friend who uses his HTC desire with RCMix S v2.0 Evolutionary Sense using SNQ v05 kernel. Does this Rom / kernel meet the InvrediControl system requirements?
One other question, in other utils I've used in the past they also supply a "reset" zip which can be used to revert the settings back to default in the event if instability/freeze (requires flash from recovery). Do you see value in creating a similar zip for over agressive UV?
Thanks again for a wonderful utility. Can't wait to try it.
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
I don't believe that kernel has the sysfs interface for adjusting voltages. You can still give it a shot though. The app will let you know if the kernel doesn't have the correct interface.
I also have a reset zip. It's on the site and there is a link in the OP.

SNQ anyone?
Ahhhw...no love for the wildly popular SNQ Kernal?!

SilverHawk2 said:
Ahhhw...no love for the wildly popular SNQ Kernal?!
Click to expand...
Click to collapse
The kernel dev has to implement the interface in order to use the app. Since I don't believe that the source for the GB kernel has been released yet for the desire, the dev won't be able to implement the interface until it is.

chad0989 said:
The kernel dev has to implement the interface in order to use the app. Since I don't believe that the source for the GB kernel has been released yet for the desire, the dev won't be able to implement the interface until it is.
Click to expand...
Click to collapse
Thanks for the heads up. Next time I have access to the phone I will install and see what unfolds. But from what you said I'm not expecting much with SNQ.
Maybe time to suggest to my friend a new Rom

[PATCH] INCOMPLETE fix for CM Performance settings only affecting cpu0

There's a long-standing bug (or omission rather) in (probably all) the kernels used for the HTC Sensation--a feature of some Qualcomm CPUs apparently--which is that you can independently set the max cpu frequency of both processor cores. Because of the way the CM Performance settings is written, it only sets cpu0 and expects cpu1 to automatically follow suite. This causes the second core to always run at the kernel's default max setting when the screen is on.
For some time now I've been twiddling with a patch for the kernel that would set cpu1(...n) to follow the changes of cpu0. I have not succeeded, and am now entirely fed up with the whole business and will dump my current results here if anyone is inclined.
I register a CPUFREQ_POLICY_NOTIFIER in the mach-msm/cpufreq.c driver and reading the values works just fine, but when I try to set them the second core seems to bog down and the phone slowly freezes.
Please note that I am not a kernel hacker, and not much familiar with Linux so there probably are glaring mistakes and stupid things in here.
This patch is against arch/arm/mach-msm/cpufreq.c and I was hacking at sources from @android1234567 's repo at https://github.com/sultanxda/sultan-kernel-bruce-linaro3
Enjoy or something

I wonder if anyone is going to include this patch. In my eyes its really usefull, but in this thread is no acticity, thats kind of awkward

s0ftcorn said:
I wonder if anyone is going to include this patch. In my eyes its really usefull, but in this thread is no acticity, thats kind of awkward
Click to expand...
Click to collapse
Give it time for a developer to look into it if it's worth it (that depends in the eyes of users / devs) it will eventually be considered.
Far as I understood by default the cpu1 will always max no matter whats defined, is that right?

MidnightDevil said:
Give it time for a developer to look into it if it's worth it (that depends in the eyes of users / devs) it will eventually be considered.
Far as I understood by default the cpu1 will always max no matter whats defined, is that right?
Click to expand...
Click to collapse
Yes, if you go by the CM Preferences GUI. It's possible to set the max frequency by doing
Code:
echo 1 > /sys/devices/system/cpu/cpu1/online && echo <value in kHz> > /sys/devices/system/cpu/cpu1/cpufreq/scaling_max_freq
Or using a init.d script like the one included in some roms, but it's a bit cumbersome

So you need an app like kernel tuner to set each cpu frequency independently is that it?
Sent from my HTC Z710e using xda premium

MidnightDevil said:
So you need an app like kernel tuner to set each cpu frequency independently is that it?
Sent from my HTC Z710e using xda premium
Click to expand...
Click to collapse
Pimp My ROM has been doing fine for me, so yeah, kernel tuner and the alike work properly from my observations.

This is the full patch and the merge error fix, it can be easily merged into AOSP roms with the CM performance built into the settings package. Enjoy
(btw this patch will even work on quad core QCOM devices)

xmc wildchild22 said:
This is the full patch and the merge error fix, it can be easily merged into AOSP roms with the CM performance built into the settings package. Enjoy
(btw this patch will even work on quad core QCOM devices)
Click to expand...
Click to collapse
This is neat, should've known someone would be there before me
I considered solving it through patching the java code, but you'd have to interface it through the sysfs tree, and that leads to a race condition; the cpufreq files only exist in the tree when the cpu is online, so you'd either have to do some kind of wait loop (could be a long time before the cpu wakes up) or somehow force it to come online--something I don't know how to do.

[KERNEL][A510/A700][07/30] Z-Kernel Beta

Welcome to Z-Kernel's thread!​
Features
- Base kernel fully updated to linux-tegra-nv-3.1 (bug fixes & performance improvements)
- Simplified board codes
- Cleaned up Acer specific code
Click to expand...
Click to collapse
Changelog
r2:
- Restarted kernel development (r1's features not implemented yet)
- Base kernel fully updated to linux-tegra-nv-3.1 (bug fixes & performance improvements)
- Simplified board codes
r1:
- CPU OC to 1.6 ghz by default (should be stable)
- GPU OC support up to 700MHz (default is 520 mhz)
- Overclocked LP core from 500 to 620 mhz
- Custom user voltage control for CPU and Core components such as EMC, GPU, and LP (faux123)
- Dynamic FSYNC
- Optimized KSM
- Optimized ZRAM
- Compiled using latest Linaro toolchain with optimized compiler flags
- Optimized SLUB and use SLUB by default instead of SLAB
- Glibc memcpy and memmove
- Deadline improvements for solid state drives
- Proportional Rate Reduction for TCP
- Tegra 3 variant display (faux123)
- Optimized swahb32 byteswap helper
- Asynchronous I/O latency improved through removal of plug in do_io_submit()
- allow use of an I/O controller's native max block size
- Optimized ARM RWSEM algorithm
- timer: optimize apply_slack()
- Optimized crypto algorithms
- Optimized AES and SHA1 routines
- LowMemoryKiller fixes and improvements
- Lock performance governor to all 4 cores
- Many scheduler improvements and optimizations
- updated bcmdhd driver (wifi)
- over 450 changes committed, so the above list isn't complete
Click to expand...
Click to collapse
Complete list of changes can be found in the commit log: https://github.com/Ziyann/android_kernel_acer_t30
I'm not responsible if anything bad happens with your device!
This build has been tested on CM11 only, so if you run into something with other ROMs, report it and I will see what I need to change to cooperate with it.
XDA:DevDB Information
Z-Kernel, Kernel for the Acer Iconia A700 and A510
Contributors
Ziyan
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: R2
Stable Release Date: 2014-07-30
Created 2014-09-23
Last Updated 2014-09-23

Nice, if it's working fine, I hope you will also support the A510/A511

Shreps said:
Nice, if it's working fine, I hope you will also support the A510/A511
Click to expand...
Click to collapse
Of course, I'll see what can I do when I get everything (OC, UV, ...) working here waiting for a tester...

it is indeed slow. even when completely debloated plus stripped of "essential" system components that I personally do not use. I will try this right away. will report back within an hour in this post.
@Ziyan
it boots, runs, everything seems standard. not seeing any performance increases though. same ol' 10 to 15 fps is there anything more you wish for me to test with it? I replaced this tab a while ago with galaxy note pro 12.2 so I can't really use it enough to check for random reboots

Sterist said:
@Ziyan
it boots, runs, everything seems standard. not seeing any performance increases though. same ol' 10 to 15 fps is there anything more you wish for me to test with it? I replaced this tab a while ago with galaxy note pro 12.2 so I can't really use it enough to check for random reboots
Click to expand...
Click to collapse
Thanks, that's good, it means I can continue improving it. I need to check the kernel periodically after a big bunch of commits, because if something gets broken, it can be hard to find what causes it if from a thousand things I'll push a new version and changelog later today or tomorrow.

sounds good. quote this post when it's uploaded, it'll send me am email notification and I can get right on it.

Sterist said:
sounds good. quote this post when it's uploaded, it'll send me am email notification and I can get right on it.
Click to expand...
Click to collapse
Here's a new version. Before testing it, please make some benchmarks with the previous version (mainly 3D), because - if everything works as it should -, the GPU is now working at 520 mhz instead of 416. It should also have CPU overclocking and voltage control support, so please install Trickster Mod, or something like that from Play Store to see if it works (screenshots are welcome). If it works (i'd be a bit surprised lol it was too easy), please run some benchmarks again to see if there's a noticeable difference. I've got 12 pages of commits waiting to be merged, so yeah, if something got broken, I better fix it now :silly:

Ziyan said:
Here's a new version. Before testing it, please make some benchmarks with the previous version (mainly 3D), because - if everything works as it should -, the GPU is now working at 520 mhz instead of 416. It should also have CPU overclocking and voltage control support, so please install Trickster Mod, or something like that from Play Store to see if it works (screenshots are welcome). If it works (i'd be a bit surprised lol it was too easy), please run some benchmarks again to see if there's a noticeable difference. I've got 12 pages of commits waiting to be merged, so yeah, if something got broken, I better fix it now :silly:
Click to expand...
Click to collapse
just woke up and leaving for work in 20 minutes. when I get there and settle in (about an hour and 20min from this post) I'll test it
which benchmark though, antutu?

Sterist said:
just woke up and leaving for work in 20 minutes. when I get there and settle in (about an hour and 20min from this post) I'll test it
which benchmark though, antutu?
Click to expand...
Click to collapse
Yeah, antutu will do, just note the invidual points

Ziyan said:
Yeah, antutu will do, just note the invidual points
Click to expand...
Click to collapse
woah woah... I just went to download the second version and the tab was dead from 77% last night, still warm.
there's a wake problem, screen will turn on one time after booting up but only that one time
and a sleep problem, after manually turning the screen off it will not turn back on (and kills battery very quickly!)

Sterist said:
woah woah... I just went to download the second version and the tab was dead from 77% last night, still warm.
there's a wake problem, screen will turn on one time after booting up but only that one time
and a sleep problem, after manually turning the screen off it will not turn back on (and kills battery very quickly!)
Click to expand...
Click to collapse
Thanks for the report, I'll investigate the problem tomorrow (it's 01:30 AM here :silly. If you could take a dmesg (while turning the screen off, then trying to turn it back on), or last_kmsg, that would be great help! If you don't know how, refer to section 2 and 3: http://forum.xda-developers.com/showthread.php?t=1520508

Ziyan said:
Thanks for the report, I'll investigate the problem tomorrow (it's 01:30 AM here :silly. If you could take a dmesg (while turning the screen off, then trying to turn it back on), or last_kmsg, that would be great help! If you don't know how, refer to section 2 and 3: http://forum.xda-developers.com/showthread.php?t=1520508
Click to expand...
Click to collapse
higher score / lower 3D performance is v1
lower score / higher 3D is v0
recent apps cleared and CPU set to 1400 performance and ROW
no app gives OC/UV options with v1
I don't have access to a pc at work so can't run dmesg properly for this, and I'm having trouble reproducing the sleep crash now
this is probably all exactly what you did not want me to say lol
edit: so, I got it to crash again (yay!) but can't get klast to work (read only fs) I tried mounting various directories as RW but honestly I have no idea which to do... and here's dmesg which may or may not contain what you need.
I know it might be a little early to ask but any chance you could implement Frandom?

Sterist said:
(cut)
edit: so, I got it to crash again (yay!) but can't get klast to work (read only fs) I tried mounting various directories as RW but honestly I have no idea which to do... and here's dmesg which may or may not contain what you need.
I know it might be a little early to ask but any chance you could implement Frandom?
Click to expand...
Click to collapse
Thanks for the detailed report, I think I revert Franco's hotplugging driver for now, seems like it's on a rampage. May try again in the future.
As for the last_kmsg, your first command was correct, it's just that it doesn't always get created.
We'll see about Frandom when we get things working nice
Here's a build with the stock hotplugging driver, report back if it still crashes.

Ziyan said:
Thanks for the detailed report, I think I revert Franco's hotplugging driver for now, seems like it's on a rampage. May try again in the future.
As for the last_kmsg, your first command was correct, it's just that it doesn't always get created.
We'll see about Frandom when we get things working nice
Here's a build with the stock hotplugging driver, report back if it still crashes.
Click to expand...
Click to collapse
ok I let it idle for about 30 minutes (that was enough to crash every time I left it alone at work) and so good so far.
still no OC/UV though
edit... idle 2 more hours and no problems

Sterist said:
ok I let it idle for about 30 minutes (that was enough to crash every time I left it alone at work) and so good so far.
still no OC/UV though
edit... idle 2 more hours and no problems
Click to expand...
Click to collapse
Great, let's see if CPU OC/UV works with this one. If it does, don't forget to run a benchmark, as GPU OC didn't work till now

Ziyan said:
Great, let's see if CPU OC/UV works with this one. If it does, don't forget to run a benchmark, as GPU OC didn't work till now
Click to expand...
Click to collapse
still no CPU OC/UV. also, that 52mhz step has never worked on any ROM or kernel I've tried, that may extend battery life

Sterist said:
still no CPU OC/UV. also, that 52mhz step has never worked on any ROM or kernel I've tried, that may extend battery life
Click to expand...
Click to collapse
Ok, it must work now.
About 52 mhz, it's so low that any small background work would ramp up the CPU to hispeed_freq, so in the end, it would shorten battery life. The same thing happens with Galaxy Nexus if we go down to 180 mhz, which is a lot, compared to 52 mhz
I've added about 200 commits since your last try (this is a great daily activity :silly, the kernel is getting to be on pair with a Nexus 7 kernel soon if we get OC/UV and some more extra things working :highfive:

Ziyan said:
Ok, it must work now.
About 52 mhz, it's so low that any small background work would ramp up the CPU to hispeed_freq, so in the end, it would shorten battery life. The same thing happens with Galaxy Nexus if we go down to 180 mhz, which is a lot, compared to 52 mhz
I've added about 200 commits since your last try (this is a great daily activity :silly, the kernel is getting to be on pair with a Nexus 7 kernel soon if we get OC/UV and some more extra things working :highfive:
Click to expand...
Click to collapse
ok so UV menu now loads but doesn't look to work quite right - not usable. this is the menu I was looking for that did not load before
OC still does not work though
about 52 (51 actually) every time it is selected, after I leave the screen and come back 102 becomes the selected minimum automatically, even if lock frequency at 51
need benchmark? and ty ty your time!

Sterist said:
ok so UV menu now loads but doesn't look to work quite right - not usable. this is the menu I was looking for that did not load before
OC still does not work though
about 52 (51 actually) every time it is selected, after I leave the screen and come back 102 becomes the selected minimum automatically, even if lock frequency at 51
need benchmark? and ty ty your time!
Click to expand...
Click to collapse
At least we're making progress :good: try this one, and also try trickster mod (specific and general menu).
Benchmarks are welcome, those 200 commits should improve performance a bit, though I think most of them can only be seen in real usage (low memory killer, zram, ...)

Ziyan said:
At least we're making progress :good: try this one, and also try trickster mod (specific and general menu).
Benchmarks are welcome, those 200 commits should improve performance a bit, though I think most of them can only be seen in real usage (low memory killer, zram, ...)
Click to expand...
Click to collapse
bootloop, won't get past Acer logo
benchmark is from the last kernel

GPU binaries - August 2014 - Kitkat

This is the generic GPU drivers for adreno GPU found in snapdragon chipsets by Qualcomm.
Although this will not magically make your GPU fast, updated drivers will fix bugs and show improvements all round.
Thanks to @denzel09 who has repacked the may binaries with correct path for Moto G.
Download Link
http://www61.zippyshare.com/v/59501646/file.html
Stock 4.4.4 Adreno drivers (those who wants to go to default)
http://www72.zippyshare.com/v/11705987/file.html
B]Changelogs[/B]
Changelogs for August
@lost101 has posted changelog
Known Issues:
Applications may hang when repeatedly disconnecting and reconnecting Adreno Profiler while plotting GPU Stall Metrics in Grapher.
Capturing OpenCL metrics with Adreno Profiler Scrubber may crash target application.
Fixes and Improvements:
Fix a failure to release performance counter resources in some cases when using Adreno Profiler with certain NDK apps and OpenCL.
Fix a crash when connecting Adreno Profiler to an app that uses the disjoint timer query extension.
Add support to Adreno Profiler for OpenCL kernel type qualifier arguments.
Add support to Adreno Profiler for clCreateImage() 1D image, 1D image array, 2D image array.
Add support to Adreno Profiler for displaying multiple OpenCL queue/device/context combinations.
Fix a potential target application crash when Adreno Profiler metrics are enabled while the GPU is not idle.
Fix for incorrect scissor results if an app calls scissor and glBufferSubdata() between two draw calls.
Fix an issue with binning configuration calculation when MSAA is enabled.
Add support for ASTC texture formats in Adreno Profiler.
Fix potential null-pointer dereference in OpenCL.
Fix rotation issues with glBlitFramebuffer() and glClipPlane() when device is not in native orientation.
Fix for possible crash when using occlusion query while changing render targets.
Fix incorrect Adreno Profiler capture for applications using 2D texture arrays.
Fix potential crash during VAO validation in buffer update calls.
Add Adreno Profiler support for buffer transmission in clFillBuffer() and clFillImage().
Improve performance when invalidating texture attachments.
Click to expand...
Click to collapse
Tested working on[/B]
XT1033 with stock ROM
XT1032 with stock ROM
XT1031 with Stock ROM
Custom ROM people should report back

abhifx said:
The nexus 4 forum is buzzing with new Qualcomm adreno drivers .
Dont know if this is working with Moto G. Maybe a dev can look into it.
also someone has posted zip files for F2FS partition.
thoughts? Link to the post is as below
http://forum.xda-developers.com/nexus-4/general/qualcomm-adreno-gpu-binaries-t2667759
Click to expand...
Click to collapse
This works also on adreno 305?
About f2fs, we have only data in f2fs but i think that these will be in system...

denzel09 said:
This works also on adreno 305?
About f2fs, we have only data in f2fs but i think that these will be in system...
Click to expand...
Click to collapse
since Adreno 305 has feature parity with 320, i was hoping that the same driver should work. i right now cant check this unless i am near my home system.

abhifx said:
since Adreno 305 has feature parity with 325, i was hoping that the same driver should work. i right now cant check this unless i am near my home system.
Click to expand...
Click to collapse
mmm i have some doubt, but i hope ..

abhifx said:
since Adreno 305 has feature parity with 320, i was hoping that the same driver should work. i right now cant check this unless i am near my home system.
Click to expand...
Click to collapse
I installed it. Can't see anything untowards. Antutu about the same result.

lmulli said:
I installed it. Can't see anything untowards. Antutu about the same result.
Click to expand...
Click to collapse
see the zip, i don't think that paths are the same

denzel09 said:
see the zip, i don't think that paths are the same
Click to expand...
Click to collapse
Guys, it seems download link is dead. Can someone re-upload it ?
@denzel09: what do you mean paths are not the same ? Drivers are in different location in moto G ?
Cheers.

Yes they are in different location. You can see them with root explorer.

Can U plz upload zip somewhere? Original link is not working :-/
Sent from my XT1032 using xda app-developers app

Update.

I repacked the zip with correct folders paths.
Last april version.
To verify install osmonitor from PS, go to message tab and see about adreno build date.
http://www39.zippyshare.com/v/58174828/file.html
Tested only on xt1032.

is there any difference after installing it?

No changes in antutu with this new libraries

When you update your nvidia/amd drivers in your pc you will go always to test them with an antutu-like software ? It's not a good point to start i think. If you see the changelog you ll see how many bugfixes i.e., improvements and so on. Drivers should be always updated by the way.

denzel09 said:
When you update your nvidia/amd drivers in your pc you will go always to test them with an antutu-like software ? It's not a good point to start i think. If you see the changelog you ll see how many bugfixes i.e., improvements and so on. Drivers should be always updated by the way.
Click to expand...
Click to collapse
Are you sure this update isn't just for 320 and 330? I'm gonna flash it, I'll report if I notice any difference

Yes, officially only for that i think.
But remember that you can restore a system backup or in next days i can make the same zip with previous older stock drivers

Well, I don't know if it is a placebo or what, but the phone feels actually a little bit responsive and with smoother animations, just that, I'm not saying that it will be a super performance boost though.

denzel09 said:
Yes, officially only for that i think.
But remember that you can restore a system backup or in next days i can make the same zip with previous older stock drivers
Click to expand...
Click to collapse
I can notice the difference
The boot lag bug has reduced (phone lags for a minute in latest cm builds)
Phone is a bit more responsive
Sent from my Moto G using Tapatalk

I am considering flashing these but I still would like some more feedback. Anyone else did it that could contribute with their experience?

Flashed on xt1031. Nothing is broken I am thinking that the content inside of the apps is loading a little quicker such as UI elements. This could be placebo though. As far as antutu goes, no changes really except I saw a new highest FPS in the 3D test I got a 27.8 at one point, which I have never seen.
Sent from my XT1031 using Tapatalk