I just tried going into recovery by shutting down phone and then power+ vol down and BAMM! Factory Reset Lol. Probably a lot of you knew this would happen but I didn't.
Just a warning for those of you who didn't know that the manual update using lg tool will overwrite CWM recovery.
yeah, i just went in and reflashed it, works fine now.
moshe22 said:
I just tried going into recovery by shutting down phone and then power+ vol down and BAMM! Factory Reset Lol. Probably a lot of you knew this would happen but I didn't.
Just a warning for those of you who didn't know that the manual update using lg tool will overwrite CWM recovery.
Click to expand...
Click to collapse
I just realized i posted this in the Dev sec.....
Can a Moderator move this please?
Just reflash with NVFlash like you just bought the phone.
Related
SO i think I totally bricked my phone. Any input would be great. MMy phone boots up and is stuck on lg screen. I tried flash CWM and stock recovery but nothing. Any ideas or should i just send back and get a new one
I really mucked this one up
It's not a brick if it turns on! But I'm fairly new to this phone and I'm not familiar with it at all Normally I would suggest to fastboot flash the new OFFICIAL CWM recovery image, but I don't even know where to begin with fastboot on this phone
chillwillo9 said:
SO i think I totally bricked my phone. Any input would be great. MMy phone boots up and is stuck on lg screen. I tried flash CWM and stock recovery but nothing. Any ideas or should i just send back and get a new one
I really mucked this one up
Click to expand...
Click to collapse
It would probably be a little helpful (if you want help) if you let everyone know what you were doing when you "bricked" your phone. That way people know where to start in assisting you.
chillwillo9 said:
SO i think I totally bricked my phone. Any input would be great. MMy phone boots up and is stuck on lg screen. I tried flash CWM and stock recovery but nothing. Any ideas or should i just send back and get a new one
I really mucked this one up
Click to expand...
Click to collapse
I had a infinite loop problem on mine. I just restored to stock.
Turn phone off (pull battery if needed)
Turn on while holding volume down + power button
chillwillo9 said:
SO i think I totally bricked my phone. Any input would be great. MMy phone boots up and is stuck on lg screen. I tried flash CWM and stock recovery but nothing. Any ideas or should i just send back and get a new one
I really mucked this one up
Click to expand...
Click to collapse
What happens when you try to boot into recovery mode?
OK here is what I did to brick my device.
I wanted to do a factory reset and I used clockwork recovery to do so.
Wat I didn't know what that Clockwork recovery was going to format my system.
I can only get into fast boot via vol up+vol+down+power
Cannot get back to stock recovery or CWM. Tried flashing via fastboot method
My phone just goes to LG screen no loading bar
Currently the only function is fastboot
Did you try formatting via Vol-Down + Power?
xenoletum said:
Did you try formatting via Vol-Down + Power?
Click to expand...
Click to collapse
Yes I did but same result stuck Lg screen no loading bar.
Capacitive touch also are not lit appear to be not working
1) Fastboot flash the official CWM recovery image
2) download http://forum.xda-developers.com/showthread.php?t=1048274
3) put the NANDROID in the correct folder on your sdcard: /sdcard/_ExternalSD/clockworkmod/backup/
4) restore via recovery
Thanks for everyones input, Called t-mobile they are shipping a new one out asap. I'm just going to have to suck it up till tuesday.
I love trial and error they only thing i lost is a little time
omarsalmin said:
1) Fastboot flash the official CWM recovery image
2) download http://forum.xda-developers.com/showthread.php?t=1048274
3) put the NANDROID in the correct folder on your sdcard: /sdcard/_ExternalSD/clockworkmod/backup/
4) restore via recovery
Click to expand...
Click to collapse
I flashed official CWM recovery image numerous times via fastboot and phone just gets stuck at lg screen. Once again vol up+power and vol down+pwer does nothing
Is there another fastboot method or adb method to restore CWM?
did the same thing it bricked my phone does nothing else than start up then freezes. f-ING pissed
The best thing with Nvidia phones and tablets is that its barely impossible to brick your phone. If you think you bricked it - you just need NV flash and either the stock rom or stock recovery and you are back to normal
I have done that with my old G-tablet - it was a piece of cake to fix it.
is there an nv flash for mac?
thought i did the same thing!
if you can get it into format hit the home button. hopefully vol+down+power will get you there. pull your battery and you may just get lucky if done enough times? i would keep trying. good luck
After flashing the latest ROM I was messing around with (WajkIUI 2.1.6) the phone would crash and reboot within 30 seconds of booting up. The previous ROM that was running was FAUXMIUI_RG2xV2.0.0 (01/08/2011 [v2.0.0]OVERCLOCK) that was stable except for when I’d turn wi-fi on after being off for 8 hours or so phone would reboot.
I figured I would boot into ClockworkMod Recovery and restore one of the nandroid backups, I tried booting into recovery I found out that I could not. When I hold the volume down and press the power button I see the screen that says software update (like when flashing with OneClickRecoveryFlasher).
Whenever I flash a new ROM I will Wipe data/factory reset, wipe cache partition, and then wipe dalvik before installing zip. I’ve always run cyanogenmod nighties; FAUXMIUI_RG2xV2.0.0 was the first MIUI ROM I’ve used.
When I run OneClickRecoveryFlasher, I do not see any errors on the command prompt so I am assuming it was successful, or at least thinks it was.
I tried to Restore LG G2x Stock Recovery using OneClickRecoveryFlasher and then flashing v5.0.2.0 and still no ClockworkMod Recovery, also tried v4.0.1.5 and still no ClockworkMod Recover.
I then tried http://forum.xda-developers.com/showthread.php?t=1248644 and with that I was able to get back to stock 2.3.3, tried to use OneClickRecoveryFlasher to flash ClockworkMod, still no go.
I tried LG Mobile Update and that proceeded to install something, not really sure what the update was, after the update finished, phone rebooted into stock 2.3.3. Shut the phone down and tried to flash ClockworkMod and still nothing.
I did a hard reset following http://mobilephonerepairguides.blogspot.com/2011/04/lg-g2x-hard-reset.html
I also tried http://forum.xda-developers.com/showthread.php?t=1183168, that got me to stock 2.3.3 but I still could not boot in to ClockwordMod Recovery.
I’m having a hell of a time wrapping my head around what I screwed up. Did I somehow destroy the recovery partition, is that possible? Any ideas what I broke and how to fix it? Can I used adb to view the partition table, would that tell me if something was corrupt?
Any help and ideas would be appreciated, I have tried doing my due diligence and I apologize if I missed something obvious.
Thanks,
-Matt
Faux never made a miui
Did you nvflashed recovery? If no then do that first.
NVIDIA NEVER AGAIN!
If you did the LG Updater it returned your phone to stock everything, including recovery. You need to use NVFlash (One Click method okay) to reflash CWM and then you should be good to go.
When the phone is completely off, hold volume down, then hold the power button and don't let go of both until the second lg logo.
If you hold volume down too early it'll give you the software update screen.
Well that's embarrassing, thanks buru898 that did the trick and got me into CWM Recovery. I never remember holding the power button for that long but it worked and I'll remember that for next time.
Thanks
fcisco13 said:
Faux never made a miui
Did you nvflashed recovery? If no then do that first.
NVIDIA NEVER AGAIN!
Click to expand...
Click to collapse
Sorry, I only wrote in the actual zip file name, I meant RG2x-MIUI v2.1.6-MultiLang/Powered by Faux Kernels CM v0.4.8(01/08/2012)[v2.0.0].
Thanks
My G2x is bricked. I have tried following this guide, but it did nothing, http://forum.xda-developers.com/showthread.php?t=1
I have tried using NVFlash to flash to stock, Flash CWM on it, but nothing seems to happen. This is the result of flashing stock recovery
http://gyazo.com/111d4f87503e91a3cd92b8a803d5bb46
After doing so, I try to boot into recovery but nothing happens. The screen lights up and shows the pure white LG sign with no colors on the side. No matter how long I hold vol DOWN and power, it doesn't want to boot into recovery. I am unsure of what to do now. Could someone help me?
hyudryu said:
My G2x is bricked. I have tried following this guide, but it did nothing, http://forum.xda-developers.com/showthread.php?t=1
I have tried using NVFlash to flash to stock, Flash CWM on it, but nothing seems to happen. This is the result of flashing stock recovery
http://gyazo.com/111d4f87503e91a3cd92b8a803d5bb46
After doing so, I try to boot into recovery but nothing happens. The screen lights up and shows the pure white LG sign with no colors on the side. No matter how long I hold vol DOWN and power, it doesn't want to boot into recovery. I am unsure of what to do now. Could someone help me?
Click to expand...
Click to collapse
You cannot boot into stock recovery on a G2X. For stock you use volume up and power and it just does a factory reset and reboots your device.
You need to flash CWM Recovery. Then you enter recovery by holding Volume Down and Power and use CWM to reformat your system and flash a rom.
If CWM doesn't work then you need to use the KDZ method to reflash your device to stock.
Don't worry it is almost impossible to fully brick a G2X. As long as you can use NVFlash the device should be recoverable.
My phone isn't stock. I had CWM on it, and I flashed PhoenixBlood ROM. When I tried to upgrade the ROM by flashing the new one, my phone ended up like this. I was able to boot into CWM by holding Vol DOWN and power, but not anymore. Right now, I can't even get into recovery.
hyudryu said:
My phone isn't stock. I had CWM on it, and I flashed PhoenixBlood ROM. When I tried to upgrade the ROM by flashing the new one, my phone ended up like this. I was able to boot into CWM by holding Vol DOWN and power, but not anymore. Right now, I can't even get into recovery.
Click to expand...
Click to collapse
It doesn't matter what your phone is. Use this method to unbrick your G2x:
http://forum.xda-developers.com/showthread.php?t=1248644
There are a couple more methods found on XDA too. Please search before posting.
hyudryu said:
My phone isn't stock. I had CWM on it, and I flashed PhoenixBlood ROM. When I tried to upgrade the ROM by flashing the new one, my phone ended up like this. I was able to boot into CWM by holding Vol DOWN and power, but not anymore. Right now, I can't even get into recovery.
Click to expand...
Click to collapse
Did you install CWM using ROM Manager?
My devise is unlocked, rooted and I have flashed clockwork recovery. I backed up my system using clockwork and was still using my ASUS system. I wanted to reset the tablet to factory and when I did it just went to the Android. After 20 minitues I realized there was a problem since it kept spinning. I tried to reboot to recovery by holding down the power and down vol keys but it will not go to recovery. Any Ideas? any Help.
No one will believe this
paullec said:
My devise is unlocked, rooted and I have flashed clockwork recovery. I backed up my system using clockwork and was still using my ASUS system. I wanted to reset the tablet to factory and when I did it just went to the Android. After 20 minitues I realized there was a problem since it kept spinning. I tried to reboot to recovery by holding down the power and down vol keys but it will not go to recovery. Any Ideas? any Help.
Click to expand...
Click to collapse
So I was really upset about the tablet and just left it in the loop. Even after I attempted to re-boot it several times I was trying to let the battery run out. Well after about an hour it booted into the factory reset tablet. I'm going to leave it alone!! No more roms or recovery's for me. All I saw was $400 down the drain. Thank God its running again.
Next time you can follow these steps in order to install the stock ROM.:
http://www.transformerforums.com/fo...er-update-your-me301t-using-adb-fastboot.html
It works with fastboot which means that you can flash the ROM even if the device is bootloops.
It saved more than once
I was trying to fix my girlfriends nexus 5 that was doing the restart loop after an update. Everything seemed to go fine. Unlocked the bootloader, etc. Flashed the newest rom (6.0.1 (MMB29S) ce1d670f61061c3902f3997510ea55d7 6bfcdfa4f4840898e5d76fa044f5e6a0f71343bf) and then something obviously went wrong (not quite sure, dont think i touched anything) and it's now stuck in a different kind of loop that only loops while it's plugged in. Ive uploaded a video to youtube, but since im a new user i cant actually link it properly yet. Hopefully this wont annoy any mods, I promise it's not spam. youtube . be / yNSoiTPnGZw
Is there any way to get it to stay on for more than a couple seconds to retry the flashing?
Any help is appreciated.
atomkrieg said:
I was trying to fix my girlfriends nexus 5 that was doing the restart loop after an update. Everything seemed to go fine. Unlocked the bootloader, etc. Flashed the newest rom (6.0.1 (MMB29S) ce1d670f61061c3902f3997510ea55d7 6bfcdfa4f4840898e5d76fa044f5e6a0f71343bf) and then something obviously went wrong (not quite sure, dont think i touched anything) and it's now stuck in a different kind of loop that only loops while it's plugged in. Ive uploaded a video to youtube, but since im a new user i cant actually link it properly yet. Hopefully this wont annoy any mods, I promise it's not spam. youtube . be / yNSoiTPnGZw
Is there any way to get it to stay on for more than a couple seconds to retry the flashing?
Any help is appreciated.
Click to expand...
Click to collapse
What was your flashing procedure, did u is a toolkit or do it manually, can u get it into bootloader or recovery? What files did u is for update and where did u get them?
Sent from my XT1526 using Tapatalk
soupysoup said:
What was your flashing procedure, did u is a toolkit or do it manually, can u get it into bootloader or recovery? What files did u is for update and where did u get them?
Sent from my XT1526 using Tapatalk
Click to expand...
Click to collapse
First i followed the guide here on xda to unlock the bootloader(guide-nexus-5-how-to-unlock-bootloader-t2507905), installed twrp, which went fine. Then i realized that i couldnt (or didnt realize how to via command line) to copy the stock rom and install it via twrp, so then i followed this guide here on xda (tutorial-how-to-flash-factory-image-t2513701) with the factory img (6.01 hammerhead), got to this point in the guide: ★After everything finished, select "Recovery" using the volume buttons. then it stalled out,turned off and now just cycles on and offf through the google logo with the lock picture or if i hold down the volume button it will go into the bootloader briefly then restart, rinse repeat.
atomkrieg said:
First i followed the guide here on xda to unlock the bootloader(guide-nexus-5-how-to-unlock-bootloader-t2507905), installed twrp, which went fine. Then i realized that i couldnt (or didnt realize how to via command line) to copy the stock rom and install it via twrp, so then i followed this guide here on xda (tutorial-how-to-flash-factory-image-t2513701) with the factory img (6.01 hammerhead), got to this point in the guide: ★After everything finished, select "Recovery" using the volume buttons. then it stalled out,turned off and now just cycles on and offf through the google logo with the lock picture or if i hold down the volume button it will go into the bootloader briefly then restart, rinse repeat.
Click to expand...
Click to collapse
Have u tried messing with the power button, there are a lot of issues on the nexus 5 with the power button causing loops, simply from getting stuck, try playing with the power button a little and see of that helps, it might just need to be replaced
Wait, did u flash the factory img with twrp, or did u flash it using fastboot?
Sent from my XT1526 using Tapatalk
soupysoup said:
Have u tried messing with the power button, there are a lot of issues on the nexus 5 with the power button causing loops, simply from getting stuck, try playing with the power button a little and see of that helps, it might just need to be replaced
Wait, did u flash the factory img with twrp, or did u flash it using fastboot?
Sent from my XT1526 using Tapatalk
Click to expand...
Click to collapse
in the end fastboot, since i coulndt see how i could copy the img over to install via twrp
im pretty sure the button is fine, since it was cycling from the ota update install, then was working fine unlocking the bootloader, but after the flash, it crapped the bed.
Different problem
I had a problem where the google logo keeps on booting up with a slight vibration.This started to happen when my was dropped.I initially thought that was a software issue and thought of installing new ROM's but eventually my device was not detected :crying:
So i took it to repair shop near my house and they said it would cost 2500
I did some google research and found the reason was due to the power button being stucked during the fall.I got that repaired and my device is good to go
siddhu007 said:
I had a problem where the google logo keeps on booting up with a slight vibration.This started to happen when my was dropped.I initially thought that was a software issue and thought of installing new ROM's but eventually my device was not detected :crying:
So i took it to repair shop near my house and they said it would cost 2500
I did some google research and found the reason was due to the power button being stucked during the fall.I got that repaired and my device is good to go
Click to expand...
Click to collapse
ok, took it into a shop, got the power button fixed. It must have been on the way out because literally one minute it worked and the second it didnt. now i think ive got it narrowed down. it's saying it's unable to mount /persist. ive tried the various fixes:
e2fsck/dev/block/platform/msm_sdcc.1/by-name/persist
and
make_ext4fs/dev/block/platform/msm_sdcc.1/by-name/persist
but all i get is a not found error. not sure what to do from here on.
success!! i ended up stumbling on a bit how to restore the persist partition i didnt try. got a custom rom installs and everything works. thanks to everyone who tried to help!!
stuck in bootloop while flashing cataclysm rom
i tried to flash cataclysm rom in my n5..i unlock bootloader, flash custom recovery using TWRP and flash cataclysm rom following the instructions in this thread http://forum.xda-developers.com/goo...s-5-how-to-unlock-bootloader-t2507905...after that it was stuck in bootloop...i tried to open recovery but it wont open anymore it will only go back to loop....how can open the recovery? is it safe to flash CWM recovery?..tnx in advance..
When it was stuck in the loop, I had to hold vol up and down with the power button (wait a few secs until it was completely off) then reboot holding down + power till it opened the bootloader. if that doesnt work, try reflashing the bootloader via fastboot. I only found out i couldnt mount the persist partition by looking at the terminal window in twrp after trying to install a rom which kept it in the boot loop. I then used the cmd: make_ext4fs /dev/block/platform/msm_sdcc.1/by-name/persist to rebuild it.
jpau11 said:
i tried to flash cataclysm rom in my n5..i unlock bootloader, flash custom recovery using TWRP and flash cataclysm rom following the instructions in this thread http://forum.xda-developers.com/goo...s-5-how-to-unlock-bootloader-t2507905...after that it was stuck in bootloop...i tried to open recovery but it wont open anymore it will only go back to loop....how can open the recovery? is it safe to flash CWM recovery?..tnx in advance..
Click to expand...
Click to collapse
After flashing TWRP, use the volume and power button to select recovery. Once in TWRP, wipe cache, data, reboot.
audit13 said:
After flashing TWRP, use the volume and power button to select recovery. Once in TWRP, wipe cache, data, reboot.
Click to expand...
Click to collapse
problems solved!!i flashed TWRP again and it it already to the recovery so i reflashed the cataclysm rom and it worked...my n5 is now working..tnx guys!
jpau11 said:
problems solved!!i flashed TWRP again and it it already to the recovery so i reflashed the cataclysm rom and it worked...my n5 is now working..tnx guys!
Click to expand...
Click to collapse
Great to hear it. Congratulations:good: