can we use the pit file from gingerbread to odin stock kd1?
DON'T USE PIT FILES. Unless you've read somewhere with specific instructions on using a pit file, don't use it! Most of the time you'll only need a PDA file in Odin.
But to answer your question, I believe you're asking if you can odin back to KD1 from Gingerbread? Yes you can, if you're able to put your phone into download mode, you can Odin whatever rom (Odin-compatible rom) you want on it.
because i have that gingerbread boot loader on froyo.
ps3hacker said:
because i have that gingerbread boot loader on froyo.
Click to expand...
Click to collapse
Do this fix- Updated to fix GB bootloaders.Gb Stock Rom Recooked-RaverX3X
golmar88 said:
Do this fix- Updated to fix GB bootloaders.Gb Stock Rom Recooked-RaverX3X
Click to expand...
Click to collapse
link is dead
ps3hacker said:
link is dead
Click to expand...
Click to collapse
You need to odin back to
Kc1, using pit, pda, csc and phone files.
Sent from my SGH-T959V using XDA App
i decompress kc1 and kd1 and no sbl.bin or boot.bin in side.
Related
Ok, so I attempted to Odin back to the leaked stock KAB file using the leaked PIT for the Vibrant 4g.
Everything seemed to work fine on the Odin side of the house, but now my phone only boots into recovery. Any help.
I am using Odin 1.81
The PIT uploaded by krylon360
The leaked T959VUVKAB tar
I placed the TAR in the PDA section of Odin
Any help is greatly appreciated.
If your rooted you can adb push a launcher on it.
Sent From My Galaxy S 4G
MvP77 said:
If your rooted you can adb push a launcher on it.
Sent From My Galaxy S 4G
Click to expand...
Click to collapse
Thank, but I went ahead and Odin'd back to the KAB build.
MvP77 said:
If your rooted you can adb push a launcher on it.
Sent From My Galaxy S 4G
Click to expand...
Click to collapse
My USB Debugging was off, so i couldnt do that
where did you download these files troby1986 ?
Ssgvendetta said:
where did you download these files troby1986 ?
Click to expand...
Click to collapse
krylon360 from Team Whiskey has the PIT posted on this site, and the TAR can be found at samfirmware.com
troby could you list exactly the steps you took? im having same problem, stuck in recovery
troby1986 said:
krylon360 from Team Whiskey has the PIT posted on this site, and the TAR can be found at samfirmware.com
Click to expand...
Click to collapse
where he post pit file can i have link please or pit file my phone was dead i repaired with jtag but now need flash with re-partition
B.R
troby1986 said:
Ok, so I attempted to Odin back to the leaked stock KAB file using the leaked PIT for the Vibrant 4g.
Everything seemed to work fine on the Odin side of the house, but now my phone only boots into recovery. Any help.
I am using Odin 1.81
The PIT uploaded by krylon360
The leaked T959VUVKAB tar
I placed the TAR in the PDA section of Odin
Any help is greatly appreciated.
Click to expand...
Click to collapse
If you searched the dev section that PIT doesn't work and will brick your phone like it did mine. I had to get my phone replaced. Even Krylon said not to use it in one of a couple threads in here. There are plenty of warnings in the DEV section saying not to use any PIT files.
How can I put this...
DO NOT USE PIT! DO NOT USE PIT! DO NOT USE PIT!
That is all.
Sent from my SGH-T959V using XDA App
http://forum.xda-developers.com/showpost.php?p=12747892&postcount=234
i have redownloaded the file about 3 times, tried reinstalling evertying and cannot get around the CRC error? what am i doing wrong? im trying to flash back to stock EE4...
thanks
Are you also using the PIT file?
Sent from my SCH-I510 using XDA App
asdecker said:
Are you also using the PIT file?
Sent from my SCH-I510 using XDA App
Click to expand...
Click to collapse
there was no pit file included?? where is that? and im using the samsung utility per directions here
http://www.mydroidworld.com/forums/...harge-ee4-full-factory-odin-return-stock.html
http://forum.xda-developers.com/showthread.php?t=1111486
try this one and read thru
I used odin to flash back to stock. Its at the top of one of these forums on the computer. Mine was failing as well till i added the pit file then it was smooth sailing. Sorry i can't direct u there, it doesn't seem to show up on the phone app
Sent from my SCH-I510 using XDA App
chiahead52 said:
http://forum.xda-developers.com/showthread.php?t=1111486
try this one and read thru
Click to expand...
Click to collapse
If you use the pit file from this thread above with this ee4 download link below it should work.
http://forum.xda-developers.com/showthread.php?t=1172182&highlight=vzw+ee4
This is the official vzw file. I had to use this one in order to get it to run back to stock ee4. All other ee4 odin files did not work for me.
Hi guys I need the boodloader, PDA, phone and CSC files, I did a downgrade of CM9 to gingerbread 2.3.5 stock ROM single FILE and my phone start in to recovery mode and says something is wrong so I read I need to flash to multi files pack
guelofh said:
Hi guys I need the boodloader, PDA, phone and CSC files, I did a downgrade of CM9 to gingerbread 2.3.5 stock ROM single FILE and my phone start in to recovery mode and says something is wrong so I read I need to flash to multi files pack
Click to expand...
Click to collapse
you should try one of the one-click odin packages by TRusselo: http://forum.xda-developers.com/showthread.php?t=979133
-SGA- said:
you should try one of the one-click odin packages by TRusselo: http://forum.xda-developers.com/showthread.php?t=979133
Click to expand...
Click to collapse
Thanks a lot man.
Sent from my SGH-I897 using Tapatalk 2
If I flash the stock ICS firmware back to my phone, will it also flash the stock recovery since im currently running the CWM Recovery?
ScottH323 said:
If I flash the stock ICS firmware back to my phone, will it also flash the stock recovery since im currently running the CWM Recovery?
Click to expand...
Click to collapse
If you use the official Odin image, I believe so.
If it doesn't, there is an official stock Recovery image that is Odin flashable floating around somewhere.
Yes it will.
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
liquidzoo said:
If you use the official Odin image, I believe so.
If it doesn't, there is an official stock Recovery image that is Odin flashable floating around somewhere.
Click to expand...
Click to collapse
What is considered as a stock odin image? Would it just have to be a stock tar. file from the NooB sticky? Is Sammobile the best place to get this file?
Thanks
ScottH323 said:
What is considered as a stock odin image? Would it just have to be a stock tar. file from the NooB sticky? Is Sammobile the best place to get this file?
Thanks
Click to expand...
Click to collapse
Yes and yes.
I use sammobile. But you'll have to extract the .tar.md5 file out of the zip you download from Sam. Use 7-zip to do that.
Sent from my SGH-I727 using xda app-developers app
I tried doing some research but with no luck. I wanted to ask if there is a way to flash a completely stock ROM I download straight from the Samsung site using maybe CWM or Odin. And how would I go on to have it rooted? I've just been having issues even with the stock debloated ROM available so I want to give this a try. Thanks in advance for any feedback and help
Sent from my SGH-T769
LiveFaster said:
I tried doing some research but with no luck. I wanted to ask if there is a way to flash a completely stock ROM I download straight from the Samsung site using maybe CWM or Odin. And how would I go on to have it rooted? I've just been having issues even with the stock debloated ROM available so I want to give this a try. Thanks in advance for any feedback and help
Sent from my SGH-T769
Click to expand...
Click to collapse
Im currently at work but pm later today around 5 pm or later I live in Texas central time zone and I could provide instructions how to do what you are asking for
Sent from my SGH-T769 using xda app-developers app
Hey thanks. Wouldn't it be nice to post your help on this thread so others that may have the same question can see?
Sent from my SAMSUNG-SGH-T769
I
LiveFaster said:
Hey thanks. Wouldn't it be nice to post your help on this thread so others that may have the same question can see?
Sent from my SAMSUNG-SGH-T769
Click to expand...
Click to collapse
So first register at www.sammobile.com, then search SGH-T769 under firmware and download the August 2012 ICS or The Feb 2013 ICS Firmware, wait for the download to finish (took me 30 minutes) then extract which ever firmware zip you downloaded then using Odin click on PDA and select the .md5 file which is located in the extracted ICS Firmware Folder that you've downloaded from sammobile.com
Download the PIT file here
http://forum.xda-developers.com/showthread.php?t=1919228
Click on PIT in Odin and then select the one downloaded from the link above
then make sure re-partition isn't checked and start the flashing process after it is done flashing and reboots you'll have stock ics to root it simply follow the instructions over at the root ics stock thread found here
http://forum.xda-developers.com/showthread.php?t=1919228
This will flash a custom recovery and once the recovery is flashed using Odin reboot into recovery and flash the superuser.zip then you'll have Rooted Stock ICS Firmware
*BOOT LOOP MIGHT OCCUR*
To fix boot looping after flashing stock ICS just boot into stock or custom recovery and wipe data and cache then reboot and you're good to go.
Sent from my SGH-T769 using xda app-developers app
Jserrano56 said:
I
So first register at www.sammobile.com, then search SGH-T769 under firmware and download the August 2012 ICS or The Feb 2013 ICS Firmware, wait for the download to finish (took me 30 minutes) then extract which ever firmware zip you downloaded then using Odin click on PDA and select the .md5 file which is located in the extracted ICS Firmware Folder that you've downloaded from sammobile.com
Download the PIT file here
http://forum.xda-developers.com/showthread.php?t=1919228
Click on PIT in Odin and then select the one downloaded from the link above
then make sure re-partition isn't checked and start the flashing process after it is done flashing and reboots you'll have stock ics to root it simply follow the instructions over at the root ics stock thread found here
http://forum.xda-developers.com/showthread.php?t=1919228
This will flash a custom recovery and once the recovery is flashed using Odin reboot into recovery and flash the superuser.zip then you'll have Rooted Stock ICS Firmware
*BOOT LOOP MIGHT OCCUR*
To fix boot looping after flashing stock ICS just boot into stock or custom recovery and wipe data and cache then reboot and you're good to go.
Sent from my SGH-T769 using xda app-developers app
Click to expand...
Click to collapse
The only thing I will add here is that you don't need the .pit file (it also eliminates the chance of accidental re-partition). Just use the .tar.md5 file as the pda and flash. Also, there isn't any chance of boot looping when flashing the file from the samfirmware site. First boot will take up to 10 minutes.
anactoraaron said:
The only thing I will add here is that you don't need the .pit file (it also eliminates the chance of accidental re-partition). Just use the .tar.md5 file as the pda and flash. Also, there isn't any chance of boot looping when flashing the file from the samfirmware site. First boot will take up to 10 minutes.
Click to expand...
Click to collapse
The PIT I wasn't sure if it was needed or not so I always used it just in case and actually I waited patiently and my phone did bootloop.
Sent from my SGH-T769 using xda app-developers app
anactoraaron said:
The only thing I will add here is that you don't need the .pit file (it also eliminates the chance of accidental re-partition). Just use the .tar.md5 file as the pda and flash. Also, there isn't any chance of boot looping when flashing the file from the samfirmware site. First boot will take up to 10 minutes.
Click to expand...
Click to collapse
do i still need to use the .pit when rooting?
LiveFaster said:
do i still need to use the .pit when rooting?
Click to expand...
Click to collapse
For rooting yes
Sent from my SAMSUNG-SGH-T769 using xda premium
LiveFaster said:
do i still need to use the .pit when rooting?
Click to expand...
Click to collapse
Not for ICS you don't. In fact, you only need the .pit for flashing CWM.
For rooting GB 2.3.x then you need the pit.
anactoraaron said:
Not for ICS you don't. In fact, you only need the .pit for flashing CWM.
For rooting GB 2.3.x then you need the pit.
Click to expand...
Click to collapse
To be honest even that's debatable - I haven't used it the last several times flashing cwm via odin. Ymmv of course
Being honest I just follow the instructions to avoid bricks
Sent from my SAMSUNG-SGH-T769 using xda premium