Related
I recently upgraded my captivate with the official att/samsung froyo release. So far it seems to have made my phone worse. It's slower, and freezes periodically. I was wondering if it's possible to root after the official upgrade or is this blocked. Hoping I can root and flash new kernel and get better performance. This droid world is new to me, so any assistance would be appreciated, especially if it's written for a novice.
Btw, I've done 2 master resets hoping it would help, and it didn't.
Here is how to install AT&T's official 2.2 Froyo ROM with all of the suckiness removed and a bunch of awsomeness added.
1. Download this. Rename it update.zip and copy it to sd_card, the the phone's internal memory,not the removable micro sd card.
http://www.mediafire.com/?ve234hbg64ctcu0
2. Download this, and copy it to sd_card.
http://www.designgears.com/roms/cognition/Cognitionv4.3.1.zip
3. Use this tool to flash back to 2.1 (don't master clear)
http://forum.xda-developers.com/showthread.php?t=731989
4. Remove battery, hold vol up + vol down + power and reinsert battery. Phone will boot into recovery mode.
5. In recovery select "reinstal packages". Then reboot
6. If phone reboots back into a the same recovery, repeat 5
7. Phone should boot into a custom recovery.
8. Select install zip -> choose zip -> Cognitionv4.3.1.zip -> install
9. Reboot
cypho said:
Here is how to install AT&T's official 2.2 Froyo ROM with all of the suckiness removed and a bunch of awsomeness added.
1. Download this. Rename it update.zip and copy it to sd_card, the the phone's internal memory,not the removable micro sd card.
http://www.mediafire.com/?ve234hbg64ctcu0
2. Download this, and copy it to sd_card.
http://www.designgears.com/roms/cognition/Cognitionv4.3.1.zip
3. Use this tool to flash back to 2.1 (don't master clear)
http://forum.xda-developers.com/showthread.php?t=731989
4. Remove battery, hold vol up + vol down + power and reinsert battery. Phone will boot into recovery mode.
5. In recovery select "reinstal packages". Then reboot
6. If phone reboots back into a the same recovery, repeat 5
7. Phone should boot into a custom recovery.
8. Select install zip -> choose zip -> Cognitionv4.3.1.zip -> install
9. Reboot
Click to expand...
Click to collapse
Dont you think you should have told the op that those are directions for flashing Cognition 4.3.1?? What if he doesn't want to flash a rom, just a kernel?
OP: Download Superclick v1.7. It will root your phone. From there, search Development threads for a kernel.
cypho said:
Here is how to install AT&T's official 2.2 Froyo ROM with all of the suckiness removed and a bunch of awsomeness added.
1. Download this. Rename it update.zip and copy it to sd_card, the the phone's internal memory,not the removable micro sd card.
http://www.mediafire.com/?ve234hbg64ctcu0
2. Download this, and copy it to sd_card.
http://www.designgears.com/roms/cognition/Cognitionv4.3.1.zip
3. Use this tool to flash back to 2.1 (don't master clear)
http://forum.xda-developers.com/showthread.php?t=731989
4. Remove battery, hold vol up + vol down + power and reinsert battery. Phone will boot into recovery mode.
5. In recovery select "reinstal packages". Then reboot
6. If phone reboots back into a the same recovery, repeat 5
7. Phone should boot into a custom recovery.
8. Select install zip -> choose zip -> Cognitionv4.3.1.zip -> install
9. Reboot
Click to expand...
Click to collapse
this is horrible advice for someone running 2.2. 2.2 brought 3e recovery which does not allow flashing 'update.zip' any more.
all the OP was looking for was how to root.
SuperOneClick 1.7 will take care of that in the RAGE method....
Pirateghost said:
this is horrible advice for someone running 2.2. 2.2 brought 3e recovery which does not allow flashing 'update.zip' any more.
all the OP was looking for was how to root.
SuperOneClick 1.7 will take care of that in the RAGE method....
Click to expand...
Click to collapse
Thanks for the Rage part. Keep forgetting that, even when I use it on my phone.
So I tried superclick 1.7 and had no luck. It would say waiting for device, I'd plug in. my phone and then would say it was running, but nothing happened. Tried with debugging on and off. Any advice? Also can you direct me where to get superclick. I'm worried that the site I got it from may be malicious. Also I'm running windows 7, just in case that makes a difference.
http://forum.xda-developers.com/showthread.php?t=803682
make sure you have the drivers installed for you phone, and you have USB debugging ON....it has to be on in order for it to work
Thank you Pirateghost. Got it rooted.
Considering I know very little about all this, is there somewhere you can to direct me to get easy, step by step, directions on how to load a new rom on my phone? I got it rooted using superoneclick v1.7, loaded titanium back up and rom manager. I'm using one click lag fix, although it seems many feel that it's not good. I was thinking of going with cog4. Any suggestions? Your awesome, thanks.
Cdub3 said:
Thank you Pirateghost. Got it rooted.
Considering I know very little about all this, is there somewhere you can to direct me to get easy, step by step, directions on how to load a new rom on my phone? I got it rooted using superoneclick v1.7, loaded titanium back up and rom manager. I'm using one click lag fix, although it seems many feel that it's not good. I was thinking of going with cog4. Any suggestions? Your awesome, thanks.
Click to expand...
Click to collapse
Flashing a rom is quite simple. Obviously I'm going to be biased and suggest Andromeda3 as the recommended ROM, since I put so much time into that rom. Check out the guides and tutorials found in Q&A and development
Sent from my HTC Vision
Most all of the roms here have flashing instructions on page 1 of that thread.
And back up before you start. You can never back up too much.
Sorry about my stupidity, but people keep mentioning 3e recovery being an issue for me since I have froyo. Will odin take care of this? Also does this whole process take me back to eclair or will it still be froyo. It seems the more questions and information, the more this process its intimidating me. Just don't want to ruin my phone
Cdub3 said:
Sorry about my stupidity, but people keep mentioning 3e recovery being an issue for me since I have froyo. Will odin take care of this? Also does this whole process take me back to eclair or will it still be froyo. It seems the more questions and information, the more this process its intimidating me. Just don't want to ruin my phone
Click to expand...
Click to collapse
yes odin will fix this in about 5 seconds or less!
before you start disable lagfix! this is important! but speed mod may just work be cause it has similar lagfix options available in the kernel. still wouldn't try it though.
recovery is part of the kernel. grab a kernel in .tar format. speedmod is great for this
open odin (not one click but full version) put .tar of kernel in pda slot
put phone in download mode (if 3 button is broke you may want to flash back to 2.1 with 3 button fix or another rom with 3-button fix via odin) you can access download mode via use of adb in the mean time.
plug in phone, make sure auto reboot is selected and reformat is not selected.
the left most box in odin should turn yellow. hit start. it takes about 3 seconds. phone will reboot with new kernel all data will be intact.
at that point you can enter recovery mode which will be cwm. you can root from cwm or install a rooted rom that will include another kernel.
kernel flashing doesn't effect data or settings or version number but kernel need to be same android version, eclair rom needs eclair kernel, froyo needs froyo ect. but a 2.2 rom can run 2.2.1 kernel and vice versa. same goes with 2.3 and 2.3.3 ect. also samsung tw roms need tw kernels, sense roms need sense kernels and aosp roms need aosp kernels. and of cource the kernel should be for you phone.
Speedmod is an i9000 kernel, if you want to just root and use stock froyo you will have to flash am I9000 modem.bin or there will be sound issues...
Use the 3e recovery push. Had to use on Vibrant.
Sent from my SAMSUNG-SGH-I897 using XDA App
studacris said:
Speedmod is an i9000 kernel, if you want to just root and use stock froyo you will have to flash am I9000 modem.bin or there will be sound issues...
Click to expand...
Click to collapse
true but you can flash a different kernel afterwards.
if the op want to read all about fixing 3e recovery with adb or other method fine. but a kernel swap is quick and easy.
Dani897 said:
true but you can flash a different kernel afterwards.
if the op want to read all about fixing 3e recovery with adb or other method fine. but a kernel swap is quick and easy.
Click to expand...
Click to collapse
I agree, just informing in case he stuck with a captivate modem with that kernel and couldn't understand the issues he was having.
so i did this, and on odin it says it passed and that it was successful, but when i check my kernel, it doesn't say speedmod. it's just the same stock kernel. I don't have kies, I have kies mini. Don't know if that's the prob. I'm in the US and I didn't think you could get the full kies. My drivers said there was an error, saying the I9000 drivers didn't work. I downloaded the kernel version specific for the ATT captivate sgh-1897. I downloaded the odin version, not the cwm version because that is what the instructions on the tourist in paradise site said to do. what now? I honestly think all I need is the kernel. I'm just looking to make my phone run faster and try to get the most out of my battery.. speedmod kernel seems right up my ally. I don't think I even need to mess with a ROM. So will this not work with kies mini? any help is appreciated
Cdub3 said:
so i did this, and on odin it says it passed and that it was successful, but when i check my kernel, it doesn't say speedmod. it's just the same stock kernel. I don't have kies, I have kies mini. Don't know if that's the prob. I'm in the US and I didn't think you could get the full kies. My drivers said there was an error, saying the I9000 drivers didn't work. I downloaded the kernel version specific for the ATT captivate sgh-1897. I downloaded the odin version, not the cwm version because that is what the instructions on the tourist in paradise site said to do. what now? I honestly think all I need is the kernel. I'm just looking to make my phone run faster and try to get the most out of my battery.. speedmod kernel seems right up my ally. I don't think I even need to mess with a ROM. So will this not work with kies mini? any help is appreciated
Click to expand...
Click to collapse
speedmod might not change the kernel version in about phone, some devs do not change that.
use the 3 button combo to get into recovery mode, does it boot into cwm with green text? if it did you are running speedmod.
also when phone boots it will say sgh-i897 on a black splash screen after the att param.ifs splash screen
if you still have blue samsung 3e recovery and no black galaxy s splash screen there was a problem.
So I do get a different screen when phone fires up. It does say sgh-1897 which is different than before, I can't seen to get the 3 button recovery thing to happen though. Hope it's right, just thought my phone would be faster. Seemed faster with oneclick lag fix. Guess I'm crazy. The phone does seem louder when it fires up, which I read this kernel helps make happen. Is there another way to get to recovery to see if the 3e issue is fixed. If so is there another kernel that would be faster for me or do I need to do the ROM thing next. Also, since I didn't think this worked I tried to install oneclick lag fix again, but couldn't because there wasn't enough space.does this mean speed mod went through. I also did the speed mod flash like 3 times thinking that it wasn't working. is that as problem? Sorry for all the questions. I'm just new to all this and I don't have much computer savy either. Thanks for putting up with me.
ok so you do have speedmod.
for recovery, with phone off, press volume+volume for 2 seconds
continue to hold volume and press power, holding all three till the first splash screen pops up then release.
first decide if you want to keep speedmod, you can root in recovery and flash to a different kernel after, can also flash a new rom now.
speedmod is an i9000 port. it may not work perfect with the kb1 modem. if you flash kc1 modem it will not work with bluetooth calling. i use it as a tool to flash other roms, to root, and to flash other kernels and not deal with 3e, that is the point of me suggesting it. but giving up bluetooth calling isn't a big sacrifice to some people and many do use it like you are.
now if you want speedmod and lagfix you can do that in recovery, speedmod has a universal lagfix. disable this before flashing a voodoo kernel (or stock) if you change it later.
the lagfix has the options to set data, dbdata, or cache to ext2,ext3,ext4,ext4 non journalling, or jfs
it can also set /system to ext4
voodoo settings are /system=ext4
/cache=ext4nj
/data=ext4
/dbdata=ext4
these are the most common settings and are very successfull.
feel free to pm me with questions, rom recomendation, ect...
edit, just noticed you already have root via rageagaintthecage method via superoneclick, i always forget about that on the sgs though i have done it on an evo the hard way a while back, now we have superoneclick so it's not hard anymore. you can install a market app called sgs kernel flash and experiment with kernels that way. prolly what i'd have told you if i read the whole thread.
easier perhaps? I read about a rom manager you download from the market...
Thanks to what efforts everyone contributes here, I've found after getting out of soft brick, I managed to get root. And I'm almost happy with the handset, now that I got root explorer to work. It works best as a browser for the 20 gigs of junk on my sd card, I've found.
What I have is the SGH-i727 att branded, returned to stock, 2.3.5, my kernel is 2.6.35.11 also I flashed something in the i777 forum, is the reason for "returned to stock". My handle could be adjusted to "stupidbiker". And I've been properly scolded.
So what's a good way to get clockwork mod in my situation?
And I don't care about a warranty or a counter, or does the counter do other bad things?
And a link for operating clockwork mod? Everyone here can push three buttons except me! LOL I've pulled it off a few times on accident, but I bet in here somewhere there is a correct procedure outlined for operating clockworkmod. A link to that would be way cool.
Wow I'm stupid. K. Thanks.
This is question and answer right? I got lots of questions!
Once I get clockworkmod in the device with all the colors, I'm gonna flash a rom, the ice cream rocket I saw, also I want to test CM7, I'm in L.A. and in the LTE area and looks like I could provide input.
I'm using search, but if someone plants a good link it would be much appreciated.
Thanks.
fukenbiker said:
easier perhaps? I read about a rom manager you download from the market...
Thanks to what efforts everyone contributes here, I've found after getting out of soft brick, I managed to get root. And I'm almost happy with the handset, now that I got root explorer to work. It works best as a browser for the 20 gigs of junk on my sd card, I've found.
What I have is the SGH-i727 att branded, returned to stock, 2.3.5, my kernel is 2.6.35.11 also I flashed something in the i777 forum, is the reason for "returned to stock". My handle could be adjusted to "stupidbiker". And I've been properly scolded.
So what's a good way to get clockwork mod in my situation?
And I don't care about a warranty or a counter, or does the counter do other bad things?
And a link for operating clockwork mod? Everyone here can push three buttons except me! LOL I've pulled it off a few times on accident, but I bet in here somewhere there is a correct procedure outlined for operating clockworkmod. A link to that would be way cool.
Wow I'm stupid. K. Thanks.
This is question and answer right? I got lots of questions!
Once I get clockworkmod in the device with all the colors, I'm gonna flash a rom, the ice cream rocket I saw, also I want to test CM7, I'm in L.A. and in the LTE area and looks like I could provide input.
I'm using search, but if someone plants a good link it would be much appreciated.
Thanks.
Click to expand...
Click to collapse
download rom manager, install cwm from that, select tmobile galaxy s2 when asked.
see what I found
First you need to flash Clockworkmod Recovery. Then you place the zip on your SDcard, do a Nandroid backup through clockworkmod Recovery (not necessary but highly, highly recommended... especially if you have never done this before.) Then select install zip from SD card, find the .Zip file and run it and you should be golden.
What is nandroid? I use Mybackup Pro. Same sort of stuff right? I'm getting close to getting my arms around everything....
waiters said:
download rom manager, install cwm from that, select tmobile galaxy s2 when asked.
Click to expand...
Click to collapse
Thank you for such a quick reply. I am on AT&T. Why would I select Tmobile?
"because that's the one that works"
is an answer I can accept. I'm not fussy just stupid.
Thank you!
I have successfully flashed ClockworkMod Recovery using ROM Manager. I'm so pleased I'm gonna get premium. I see directions! It shows a button for flashing a custom rom that I store on my SD card? Do I dare?
I picked the tmobile thing and so far so good. I got data and just tried a phone call. Happy.
I will follow the other threads now. If a moderator thinks people will get more stupid reading my new thread they may delete it.
I soft bricked
figured out Odin enough to flash back to stock
got root
went to market and installed ROM Manager
turned on wifi as ROM Manager recommended
after a good hookup, I flashed ClockworkMod recovery
Surfed the web, made a phone call, took a picture, uploaded to facebook
Looks like I'm all good.
I'm feeling ready...
fukenbiker said:
Thank you for such a quick reply. I am on AT&T. Why would I select Tmobile?
"because that's the one that works"
is an answer I can accept. I'm not fussy just stupid.
Click to expand...
Click to collapse
apparently they are very similar (but dont get crazy and start installing the tmobile gs2 kernel/roms) - also there is no skyrocket version yet...
but yes cwm does work perfectly from rom manager when you select tmobile gs2
i did this myself the other day... works fine..
just download rom manager, have fun.. good luck
hey ****enbiker would you say your kinda ''noobish'' when it comes to this ? lol I'm just super scared to do this. To avoid voiding my warranty I was even thinking of just saving a check and getting a nexus s to fool around with, but if your new to this and would say ''ALMOST anyone can do it'' I'd say I might be game. I just would like to learn somethings from newer rooters rather than annoy/piss off the Vets!
I have screwed up every phone I got my hands on so not a noob exactly. I am at present using cm7 and considering the new kernel released this morning. What's holding me back is how well it works and how easily I screw up and screen rotation work around is good enough so why flash and set up again... oh I will flash again but just got it all restored back and gotta take it to work tomorrow ...
Yeah pretty much if I can do it anyone can. I really am ignorant compared to a programmer or developer. But not many noobs have broken as much stuff as I have!
Sent from my SGH-I727 using xda premium
Boot into CWM?
waiters said:
apparently they are very similar (but dont get crazy and start installing the tmobile gs2 kernel/roms) - also there is no skyrocket version yet...
but yes cwm does work perfectly from rom manager when you select tmobile gs2
i did this myself the other day... works fine..
just download rom manager, have fun.. good luck
Click to expand...
Click to collapse
I am having trouble getting CWM to boot on device start-up with the Vol Up Key, is this how you do it or am I doing it wrong?
I can easily get to it from choosing "Reboot into Recovery" from ROM manager but I want to make sure I can get in without Android in case I need to do a full NAND recovery.
Thanks
promiseofcake said:
I am having trouble getting CWM to boot on device start-up with the Vol Up Key, is this how you do it or am I doing it wrong?
I can easily get to it from choosing "Reboot into Recovery" from ROM manager but I want to make sure I can get in without Android in case I need to do a full NAND recovery.
Thanks
Click to expand...
Click to collapse
its volume UP and DOWN......
the2rrell said:
its volume UP and DOWN......
Click to expand...
Click to collapse
Wow OK I thought I tried that, anyway it worked! Thanks a lot.
Sent from my SAMSUNG-SGH-I727 using XDA App
YouTube stutters on CM
Okay after I finally settled in with version 4 I have figured out that version 3 it was okay YouTube did not stutter or jerk, it is this new Da_G's kernel when the video went to hell. I remember the problem appeared in version 3 after flashing Da_G's kernel.
I have not tried any other kernel beside Da_G's with version 4. And YouTube is skippy jerking all to our dismay here. Or there, where ever I was to report this, beg pardon.
Sent from my SGH-I727 using xda premium
edit:
I see you don't have to press the power button?
I always begin that way, I press all three at once.
Volume up, volume down, and power.
After it buzzes three times I keep the volume up and down held, but let go of the power button.
I keep the volume up and down held until I see a logo on the screen. Then I let go of the phone and it boots into the scarey black screen with dos writing and you have to navigate with the hardware buttons.
That's how I've been doing it and it puts me into cwm recovery straight from putting the battery back in, every time.
If a true noob is reading this, you're dropping in after I've rooted and then obtained clockworkmod from the market, granted it superuser permissions, and then, after getting past the advertisements, you select to flash clockworkmod.
Also you'll see discussion of not getting a signal and getting an APN. Before you try CyanogenMod or CM7, which is what I use, you take your handset that has a working signal, and download an app from the market called "APN backup and restore" and do a backup of your APN. (not for those who refuse to populate the phone with a chip) (also not for those who don't have a working wifi readily available) Now make sure you have a copy of that on the other chip. The Skyrocket has an internal SD and also an external SD which ATT turns out is too cheap to put one in there when they sell it...
Make sure you have ApnBackupRestore folder with it's xml content on both chips.
Then go to CM7, in the op, get version 4, then go to the kernel thread and get Da_G's kernel, and put them on BOTH sd cards (so you won't have trouble finding it LOL)
And there you have it. Yet another blue collar attempt at helping folks that are smarter than I am that aren't as brave as I am!
Pull the battery, and apparently only hold the two volume buttons after putting the battery back in, never tried it that way! Wipe Data/Factory reset, find the rom and install it, find the kernel and flash that zip as well (install it, trying to help with lingo) reboot, then hook up to wifi, download APN backup/restore from the market (your phone will sync and load it for you when you log in with your google gmail to set up the handset. Run the APN backup and restore app and enjoy CyanogenMod!
My favorite, can you tell, LOL
fukenbiker said:
Okay after I finally settled in with version 4 I have figured out that version 3 it was okay YouTube did not stutter or jerk, it is this new Da_G's kernel when the video went to hell. I remember the problem appeared in version 3 after flashing Da_G's kernel.
I have not tried any other kernel beside Da_G's with version 4. And YouTube is skippy jerking all to our dismay here. Or there, where ever I was to report this, beg pardon.
Sent from my SGH-I727 using xda premium
edit:
I see you don't have to press the power button?
I always begin that way, I press all three at once.
Volume up, volume down, and power.
After it buzzes three times I keep the volume up and down held, but let go of the power button.
I keep the volume up and down held until I see a logo on the screen. Then I let go of the phone and it boots into the scarey black screen with dos writing and you have to navigate with the hardware buttons.
That's how I've been doing it and it puts me into cwm recovery straight from putting the battery back in, every time.
If a true noob is reading this, you're dropping in after I've rooted and then obtained clockworkmod from the market, granted it superuser permissions, and then, after getting past the advertisements, you select to flash clockworkmod.
Also you'll see discussion of not getting a signal and getting an APN. Before you try CyanogenMod or CM7, which is what I use, you take your handset that has a working signal, and download an app from the market called "APN backup and restore" and do a backup of your APN. (not for those who refuse to populate the phone with a chip) (also not for those who don't have a working wifi readily available) Now make sure you have a copy of that on the other chip. The Skyrocket has an internal SD and also an external SD which ATT turns out is too cheap to put one in there when they sell it...
Make sure you have ApnBackupRestore folder with it's xml content on both chips.
Then go to CM7, in the op, get version 4, then go to the kernel thread and get Da_G's kernel, and put them on BOTH sd cards (so you won't have trouble finding it LOL)
And there you have it. Yet another blue collar attempt at helping folks that are smarter than I am that aren't as brave as I am!
Pull the battery, and apparently only hold the two volume buttons after putting the battery back in, never tried it that way! Wipe Data/Factory reset, find the rom and install it, find the kernel and flash that zip as well (install it, trying to help with lingo) reboot, then hook up to wifi, download APN backup/restore from the market (your phone will sync and load it for you when you log in with your google gmail to set up the handset. Run the APN backup and restore app and enjoy CyanogenMod!
My favorite, can you tell, LOL
Click to expand...
Click to collapse
Whoa!!!!! COOL STORY BRO.............LOL
I'm sure this will help someone.
Sent from my SAMSUNG-SGH-I727 using xda premium
I don't know for sure, about the vol. up/dn.. but when I rooted my phone, the only way that I could get it to work was power & volume DOWN only. The three button just got me no where.
Sent from my SGH-I727R using xda premium
Hello there guy's I'm new with rooted charge phones. Well guy's last night I did a stupid thing with my phone.. I accidentally updates my phone with the new OTA FP1 with rooted rom. Well guy's now my phone is screwing up.
So I followed few steps on at XDA.. How to fix my phone.. So I got my phone on stock rom and also I got the new update OTA FP1.
Well guy's I need some help on rooting this phone with the new update stock OTA FP1 rom.
The person who help me on rooting my phones he left to a church mission at south Africa.
Could any one please guide me on steps on rooting this phone on the new stock Rom (FP1) rooted also includes radios, kernel.
Please I need help guides steps with this phone issues because I'm not great person on rooting.
Sent from my SCH-I510 using xda premium
sgtkillspot said:
Hello there guy's I'm new with rooted charge phones. Well guy's last night I did a stupid thing with my phone.. I accidentally updates my phone with the new OTA FP1 with rooted rom. Well guy's now my phone is screwing up.
So I followed few steps on at XDA.. How to fix my phone.. So I got my phone on stock rom and also I got the new update OTA FP1.
Well guy's I need some help on rooting this phone with the new update stock OTA FP1 rom.
The person who help me on rooting my phones he left to a church mission at south Africa.
Could any one please guide me on steps on rooting this phone on the new stock Rom (FP1) rooted also includes radios, kernel.
Please I need help guides steps with this phone issues because I'm not great person on rooting.
Sent from my SCH-I510 using xda premium
Click to expand...
Click to collapse
Follow direction #5:
http://forum.xda-developers.com/showthread.php?t=1560117
re
I was fuclking frustrated when trying to CWM / ROOT / CUSTOM rom my charge.
I have rooted and installed more roms than i can shake a stick at with my other phones.
But the lack of information on sooooo many of the dev threads that leave out soooooooooooooooooooooooo much info made my head spin.
First of all.
Odin is a program that you can install clockword mod with, as well as some custom roms.
Clockwork mod is a recovery / install tool that you install to be able to install custom roms and packages.
Even installing clockwork mod is a hassle, often you have to install it with odin and select, dont auto reboot. then pull the usb and then the battery.. then you have to hit the VolumeUp button + power + home to get into cwm.. and hopefully it will stick..
Once you get cwm installed you have to download a rom..
There are many of them, i went with a package that you load via odin instead of installing from clockwork mod.
i went with a package that was a stock 2.3.6 with root.
after i installed it, it was recommended that you wipe devlink cache, system cache.
finally after i rebooted i finally had a rom that was rooted.
This was after 2+ hours of searching through threads, downloading way too much crap and swearing at my computer for the lack of quality directions.
Usually XDA is rife with STICKYS that are easy to follow.
The charge forum is quite the opposite.
If i was not tired / drunk and frustrated i would post a correct HOW TO thread.. that i would imagine would not get stickied.
sprintrjm said:
I was fuclking frustrated when trying to CWM / ROOT / CUSTOM rom my charge.
I have rooted and installed more roms than i can shake a stick at with my other phones.
But the lack of information on sooooo many of the dev threads that leave out soooooooooooooooooooooooo much info made my head spin.
First of all.
Odin is a program that you can install clockword mod with, as well as some custom roms.
Clockwork mod is a recovery / install tool that you install to be able to install custom roms and packages.
Even installing clockwork mod is a hassle, often you have to install it with odin and select, dont auto reboot. then pull the usb and then the battery.. then you have to hit the VolumeUp button + power + home to get into cwm.. and hopefully it will stick..
Once you get cwm installed you have to download a rom..
There are many of them, i went with a package that you load via odin instead of installing from clockwork mod.
i went with a package that was a stock 2.3.6 with root.
after i installed it, it was recommended that you wipe devlink cache, system cache.
finally after i rebooted i finally had a rom that was rooted.
This was after 2+ hours of searching through threads, downloading way too much crap and swearing at my computer for the lack of quality directions.
Usually XDA is rife with STICKYS that are easy to follow.
The charge forum is quite the opposite.
If i was not tired / drunk and frustrated i would post a correct HOW TO thread.. that i would imagine would not get stickied.
Click to expand...
Click to collapse
Hey bro, no need to get frustrated, you tried too hard to learn all at once. Let talk about what you have on your phone and what you want to achieve? I will take you through step by step.
Another thing I want to clear with you about Odin and CWM. They both are two useful tools to flash rom/kernel etc.. If kernel or full rom image are created in a ZIP format or extension, you use cwm. If a rom/kernel created in a MD5 format or extension, you would use Odin.
For example; the new FP1 kernel was made in both format so you have a choice to use either to flash.
Summary:
1. If the file ended with ZIP extension like "FP1_kernel.ZIP", you would use CWM to flash.
2. If the file ended with MD5 extension like "FP1_kernel.MD5", then you would use Odin to flash.
In order to use cwm, it has to be installed on your phone. cwm was created in MD5 extension, so you need to use Odin to install cwm to your phone. Once cwm installed on your phone, in order to access it, you need to hold Vol up+home+power button to get to it, then you can use it to flash zip file.
Odin is an execution PC file (.exe), you download and install on your PC and it used to flash MD5 file. In order for Odin to talk to your phone, you have to put your phone in "download mode". By remove battery, plug in usb cable between your PC and phone, press Vol down button, this will put your phone in download mode, now you re insert battery back to ensure a stable data transfer between your PC and phone. Without put back battery, data transfer may fail. After this, Odin is ready to flash Md5 file to your phone.
Like I said, let me know what's on your phone and what you want to achieve, I can help you step by step to get it done. After you have some practice, you will understand what involved and how to use them. Cheers!!!
re
yeah.. i should have just read through the forums a day or so to figure out the odin / rooting / rom process for this phone.
But i am a seasoned vet in the android world and got pretty frustrated, mainly because a few of the other xda forums made me a little jaded by the process.
I have a fully functioning 2.3.6 rooted charge with CWM and the edited build prop to keep the Unwanted ota updates from bugging me.
Thanks for not flaming the f-out of me.
BTW have yall come across a thread about sandblasting or sandpapering the back cover of the phone to make it less slippery? I have sweaty f-ing hand, i know gross, but its a slippery phone for me.
sprintrjm said:
yeah.. i should have just read through the forums a day or so to figure out the odin / rooting / rom process for this phone.
But i am a seasoned vet in the android world and got pretty frustrated, mainly because a few of the other xda forums made me a little jaded by the process.
I have a fully functioning 2.3.6 rooted charge with CWM and the edited build prop to keep the Unwanted ota updates from bugging me.
Thanks for not flaming the f-out of me.
BTW have yall come across a thread about sandblasting or sandpapering the back cover of the phone to make it less slippery? I have sweaty f-ing hand, i know gross, but its a slippery phone for me.
Click to expand...
Click to collapse
Not a problem, you can get a back cover from ebay for a few bucks and it will do the trick.
Seems like you already knew how to handle cwm, why don't you flash (using cwm) FP1 eclipse rom, kernel and radio, so you will be on the latest O/S?
Hey guys this is my first post here on the forums so go easy on me
So I bought this phone a couple weeks ago off of eBay. The phone was already rooted when I bought it and it is my first experience with a rooted android. I've been doing my best to learn everything I can about all the different things I can do with a rooted phone and I've learned a lot so far.
One thing that's stumping me though is that my phone will randomly just not turn back on after I lock the screen. This happens very randomly and happened to me last night which meant that my alarm didn't go off and I was late to work.
I've tried searching the forum but I can't seem to find a cause or a fix for this problem. If there is any information that I neglected to include, I apologize and will be happy to include that in another post.
Anything that y'all could do to help me would be greatly appreciated!
Sent from my Nexus S using xda app-developers app
it's happen for me too. JB 4.1 stock rom
Maybe try another kernel. I use AIR and.have heard great things bout MATR1X and Marmite as far as stability.
I would back up your apps and do a wipe and reinstall your ROM. For back ups and system tweakage I.use Android Tuner.
I guess we should know your current set up to help you the best. Please tell us what ROM Kernel combo you ate running.and I will do my best to offer suggestions as I'm sure the test.of the community.here will.
Sent from my phone using my thumbs and a keyboard
happen to me twice in the same day on stock unrooted JB. since then, nothing
Nexism said:
Maybe try another kernel. I use AIR and.have heard great things bout MATR1X and Marmite as far as stability.
I would back up your apps and do a wipe and reinstall your ROM. For back ups and system tweakage I.use Android Tuner.
I guess we should know your current set up to help you the best. Please tell us what ROM Kernel combo you ate running.and I will do my best to offer suggestions as I'm sure the test.of the community.here will.
Sent from my phone using my thumbs and a keyboard
Click to expand...
Click to collapse
Ok I think that the screenshot I attached is what you are asking for. If it isn't please let me know what else you need to know. Like I said earlier, I bought the phone pre-rooted so I'm not very sure how use another kernel or flash a different ROM. The whole process seems a little intimidating to me but I would be willing to try it out. I just really don't want to brick my phone because I don't know what I'm doing haha.
You're running a build based of the SDK.
Simply put. Get that crap off of your phone. Flash official stock , a custom ROM or whatever but that needs to go
albundy2010 said:
You're running a build based of the SDK.
Simply put. Get that crap off of your phone. Flash official stock , a custom ROM or whatever but that needs to go
Click to expand...
Click to collapse
Oh, well that makes me feel great about my purchase
Would you mind telling me what the best way to do this is, or directing me to instructions how to do it? I'm really new to this and I would hate to ruin my phone because of my inexperience.
I really appreciate the help.
NikoStone said:
Ok I think that the screenshot I attached is what you are asking for. If it isn't please let me know what else you need to know. Like I said earlier, I bought the phone pre-rooted so I'm not very sure how use another kernel or flash a different ROM. The whole process seems a little intimidating to me but I would be willing to try it out. I just really don't want to brick my phone because I don't know what I'm doing haha.
Click to expand...
Click to collapse
follow this thread to update to the official stock jellybean
http://forum.xda-developers.com/showthread.php?t=1736645
Cascabreu said:
follow this thread to update to the official stock jellybean
http://forum.xda-developers.com/showthread.php?t=1736645
Click to expand...
Click to collapse
Ok, thanks. Is this the latest update? Please forgive me for the complete noob questions that follow:
1. I've downloaded the file, but how do I open it and perform the update?
2. Will updating it this way cause me to lose root?
Well first off you should be posting in the Q&A section.
Use fastboot to install factory images. You can download fastboot and the driver for it from the links in my signature.
1. Download the factory image for your device and extract all the image files in it, put them in the folder where fastboot.exe is located.
2. Hold shift + right click on the folder where fastboot.exe is located, choose "Open command window here" (if you're using Windows 7)
3. Boot the phone into bootloader/fastboot mode and connect it to the computer. (While the phone is off, hold VOL+ and POWER).
4. The computer should now ask for the driver, point it to the location of the drivers you downloaded.
5. Open up the file "flash-all.sh" that you extracted along with the factory images with a text editor, it will tell you the commands you'll need to type to install the images:
fastboot flash bootloader bootloader-crespo-i9020xxlc2.img
fastboot reboot-bootloader
fastboot flash radio radio-crespo-i9020xxki1.img
fastboot reboot-bootloader
fastboot -w update image-soju-jro03l.zip
I can't remember if this process will wipe your entire internal storage or not.
Now if you want to root, try this: http://forum.xda-developers.com/showthread.php?t=1479831, although there are other ways to root.
Or you can follow these instructions to install Clockworkmod and using it to flash root: http://dottech.org/25412/how-to-root-nexus-s/.
eksasol said:
Well first off you should be posting in the Q&A section.
Use fastboot to install factory images. You can download fastboot and the driver for it from the links in my signature.
1. Download the factory image for your device and extract all the image files in it, put them in the folder where fastboot.exe is located.
2. Hold shift + right click on the folder where fastboot.exe is located, choose "Open command window here" (if you're using Windows 7)
3. Boot the phone into bootloader/fastboot mode and connect it to the computer. (While the phone is off, hold VOL+ and POWER).
4. The computer should now ask for the driver, point it to the location of the drivers you downloaded.
5. Open up the file "flash-all.sh" that you extracted along with the factory images with a text editor, it will tell you the commands you'll need to type to install the images:
fastboot flash bootloader bootloader-crespo-i9020xxlc2.img
fastboot reboot-bootloader
fastboot flash radio radio-crespo-i9020xxki1.img
fastboot reboot-bootloader
fastboot -w update image-soju-jro03l.zip
I can't remember if this process will wipe your entire internal storage or not.
Now if you want to root, try this: http://forum.xda-developers.com/showthread.php?t=1479831, although there are other ways to root.
Or you can follow these instructions to install Clockworkmod and using it to flash root: http://dottech.org/25412/how-to-root-nexus-s/.
Click to expand...
Click to collapse
I appreciate the extensive list of instructions you provided. I tried my best to follow them but I couldn't quite figure out what I was doing wrong. I decided to try to install a custom ROM instead and was able to install cm9 pretty easily. Will this be sufficient to remove the aforementioned problem I was having?
If your already rooted then you don't need to go through a lot of that even.though it was a good walkthrough. If you flashed a new ROM then.you have.some sort of recovery in place. As long as you do a full wipe to get the previous owners garbage off of there and then flash a new ROM like CM9 then you should be golden the new ROM will come with it's own kernel so you don't need to start learning about those until you want to.
If I may make a suggestion, give AOKP Build 4 a try the ROM you chose is good but is using old code (ICS) If you just got a new phone why not put the latest on it.
Keep me (us) posted as we the reason a lot of us belong to this forum is to offer any help we can....AOKP4 you won't regret it.
Sent from my phone using my thumbs and a keyboard
That works too, you can flash the stock roms here (using CWM) or stay with the custom rom: http://forum.xda-developers.com/showthread.php?t=1843301
Nexism said:
If your already rooted then you don't need to go through a lot of that even.though it was a good walkthrough. If you flashed a new ROM then.you have.some sort of recovery in place. As long as you do a full wipe to get the previous owners garbage off of there and then flash a new ROM like CM9 then you should be golden the new ROM will come with it's own kernel so you don't need to start learning about those until you want to.
If I may make a suggestion, give AOKP Build 4 a try the ROM you chose is good but is using old code (ICS) If you just got a new phone why not put the latest on it.
Keep me (us) posted as we the reason a lot of us belong to this forum is to offer any help we can....AOKP4 you won't regret it.
Sent from my phone using my thumbs and a keyboard
Click to expand...
Click to collapse
First I want to say thank you to everybody for all the help so far. :highfive: I'm still learning but I am slowly figuring all of this out.
Nexism, I would be interested in trying AOKP build 4 if you wouldn't mind explaining the easiest way to do it or point me somewhere that can explain it to me. I don't know what all goes into flashing a new ROM and I don't want to forget something that will mess up my data or my battery life.
Here is the AOKP thread. Its located in the general section.
http://forum.xda-developers.com/showthread.php?t=1645400
As far as flashing goes...
Download the ROM from the above thread
Download a good app backup app (I use Android Tuner, it seems like everyone else uses Titanium Backup or ROMToolbox all have free versions only thing you'll miss is batch restore)
Back up your $hit
Boot I recovery (phone off, hold vol up while powering phone on) then scroll to recovery
(At this point opinions differ a bit) I go to mounts and storage and format the following data, cache, system, then boot then back out to the main menu and wipe all factory reset (I'm kind of a neat freak just.like to make sure I'm always starting with a clean slate)
Then install your.ROM and Gapps after a few min main recovery menu will come up
Select reboot
Go through the norm set up
Re-install backup app
Restore your apps
Then play around with all.the new features on your Nexus
Sorry if this is too basic of a walkthrough no offense if so. You can PM me if you need more detail. Good luck, happy flashing.
Sent from my phone using my thumbs and a keyboard
Nexism said:
Here is the AOKP thread. Its located in the general section.
http://forum.xda-developers.com/showthread.php?t=1645400
As far as flashing goes...
Download the ROM from the above thread
Download a good app backup app (I use Android Tuner, it seems like everyone else uses Titanium Backup or ROMToolbox all have free versions only thing you'll miss is batch restore)
Back up your $hit
Boot I recovery (phone off, hold vol up while powering phone on) then scroll to recovery
(At this point opinions differ a bit) I go to mounts and storage and format the following data, cache, system, then boot then back out to the main menu and wipe all factory reset (I'm kind of a neat freak just.like to make sure I'm always starting with a clean slate)
Then install your.ROM and Gapps after a few min main recovery menu will come up
Select reboot
Go through the norm set up
Re-install backup app
Restore your apps
Then play around with all.the new features on your Nexus
Sorry if this is too basic of a walkthrough no offense if so. You can PM me if you need more detail. Good luck, happy flashing.
Sent from my phone using my thumbs and a keyboard
Click to expand...
Click to collapse
Awesome, thanks man.
It was exactly what I needed to know - not too basic. I flashed it and now I'm checking it out. Is there any reason I would need to use a custom kernel for anything?
No, only i u find it slow as it is now. If u want a custom kernel go for matr1x one
Sent from my Nexus S using xda app-developers app
Glad to here your Nexus is doing well.
Now that you have a good build make a backup (in recovery) so you will always have a working configuration to go back to then experiment all you want. I may get corrected on this but as long as I have a backup and access to recovery mode I know that the chances of me bricking my phone is slim to none. So I am a flash happy fool. I try everything new when it comes out.
Get comfortable with your new ROM and flashing in general and as you see a need try different stuff out.
I use a custom kernel because I use the on screen navbar and I like to turn off the hardware key backlight. You also have control over CPU min/max Frequency,governors, and I/o schedulers as well as some extra tweak options. If you're like me the more you learn the more you'll flash.
Check out NSTools it is one of the must have apps for our phones.
Again, I am available for anymore help I can.offer.
Sent from my phone using my thumbs and a keyboard
Hey everyone! I would like to start off by saying that I am brand new here, and am surely going to mess up quiet alot... But here goes,
I've recently rooted my phone with a very simple guide, and it's the first device I've every rooted. So I know very little of the process of doing so, (I'm learning slowly).
I also have found a rom that I would like to install, but I would love to know if others think it seems legit? If it is real, I know many people would absolutely love to use it! The rom's URL is (ht tp:// playfuldroidz.com /wiki/ CyanogenMod_10_Motion) (Please remove spaces, sorry as I said i'm new...)
Now I don't mind testing this myself, but being as new as I am at android I honestly do not know how to follow the relatively simple instructions.
(This Is where I need some help, Please be noob cautious!)
Download the .zip & copy to phone or sdcard (make sure 4g or wifi is enabled if dl'd from phone).
Zip can be installed from either internal or external sd in CWM (Which ever you copied it too!)
MAKE A BACKUP!!!
DO A FACTORY RESET!!! - this will wipe data & cache!
Go to install zip from sdcard
Choose zip from sdcard
Select cm-10-xxxxxxxxxx-UNOFFICIAL-l0.zip
Confirm
Repeat Steps 5 -8 for gapps
Reboot
Now my first question I'd love some help with, is how do I perform this backup there talking about? do they just mean my simple go into settings and click backup? Or should I do it some otherway?
Second question: Do they mean the phones built in service of factory reset?
Third Question: To install a Zip from an SD card do I need to simply use ES file explorer, or root file browser? Or is there a custom way to install a Zip file on android?
Fourth and final Question: What is gapps..? Is this something I should get or use?
EDIT: I've got a fifth one also... Thanks to anyone who's stayed this long and is willing to help me.! Will this Cyanogen mod (If working) Work almost exactly like a real nexus Operating system? I've got a nexus 7 tablet running stock android, and I love it! That's why I'm doing this to my phone honestly.
Thank you all greatly!
Prophet968 said:
Hey everyone! I would like to start off by saying that I am brand new here, and am surely going to mess up quiet alot... But here goes,
I've recently rooted my phone with a very simple guide, and it's the first device I've every rooted. So I know very little of the process of doing so, (I'm learning slowly).
I also have found a rom that I would like to install, but I would love to know if others think it seems legit? If it is real, I know many people would absolutely love to use it! The rom's URL is (ht tp:// playfuldroidz.com /wiki/ CyanogenMod_10_Motion) (Please remove spaces, sorry as I said i'm new...)
Now I don't mind testing this myself, but being as new as I am at android I honestly do not know how to follow the relatively simple instructions.
(This Is where I need some help, Please be noob cautious!)
Download the .zip & copy to phone or sdcard (make sure 4g or wifi is enabled if dl'd from phone).
Zip can be installed from either internal or external sd in CWM (Which ever you copied it too!)
MAKE A BACKUP!!!
DO A FACTORY RESET!!! - this will wipe data & cache!
Go to install zip from sdcard
Choose zip from sdcard
Select cm-10-xxxxxxxxxx-UNOFFICIAL-l0.zip
Confirm
Repeat Steps 5 -8 for gapps
Reboot
Now my first question I'd love some help with, is how do I perform this backup there talking about? do they just mean my simple go into settings and click backup? Or should I do it some otherway?
Second question: Do they mean the phones built in service of factory reset?
Third Question: To install a Zip from an SD card do I need to simply use ES file explorer, or root file browser? Or is there a custom way to install a Zip file on android?
Fourth and final Question: What is gapps..? Is this something I should get or use?
EDIT: I've got a fifth one also... Thanks to anyone who's stayed this long and is willing to help me.! Will this Cyanogen mod (If working) Work almost exactly like a real nexus Operating system? I've got a nexus 7 tablet running stock android, and I love it! That's why I'm doing this to my phone honestly.
Thank you all greatly!
Click to expand...
Click to collapse
Question 1,2 and 3.. they are all done through Clockworkmod. Look through the menus you'll see it if you still struggle look on YouTube.
Question 4.. gapps is Google Apps you need to flash this after the ROM to get the play store and all the other standard Google apps.
Question 5.. in your eyes pretty much, it'll look the same but with more features obviously.
Thank you alot!
Thanks! now i've only gotta do one last thing, and see if anyone knows whether or not this website is a reliable source, or atleast if the mod works...
Prophet968 said:
Thanks! now i've only gotta do one last thing, and see if anyone knows whether or not this website is a reliable source, or atleast if the mod works...
Click to expand...
Click to collapse
Just give it a go mate, if in doubt try it out lol (don't quote me on that haha)
Alright I've got one last dumb question
CdTDroiD said:
Just give it a go mate, if in doubt try it out lol (don't quote me on that haha)
Click to expand...
Click to collapse
I was just wondering if there's a chance this clock work mod thing doesn't work on my phone? I don't really know how, or where it is either... and I'd love some help with that... Thank you!
(Edit) I don't think there is a clockwork mod for my device... According to the Rom Manager app I was told to use for installing it.
Prophet968 said:
I was just wondering if there's a chance this clock work mod thing doesn't work on my phone? I don't really know how, or where it is either... and I'd love some help with that... Thank you!
(Edit) I don't think there is a clockwork mod for my device... According to the Rom Manager app I was told to use for installing it.
Click to expand...
Click to collapse
If you did what it said in the instructions *root it, cwm, install custom rom* then after installing the custom rom it has it's own cwm. turn off the phone, turn in back home and press the back and home button together at the same time and it should take you to the rom's cwm. If the phone does a factory reset by pressing the back and home button then you did the installation wrong.
But just in case I'll setup a full instruction for you.
Root your phone.
Which can be done easily, just download this and extract the files: http://www.mediafire.com/?dhdbwflnl1vknx2
once you extract the files put your phone on debugging mode which can be done by going to settings, developer mode, and click usb debug.
once you've done that connect your phone to the pc *make sure it's on charge only* wait for driver installation to finish. once that's done click root. follow instructions on the screen it shouldn't be too hard! after following instructions you should be rooted and have cwm. but to install the recovery go to your apps and find lte 2nd init recovery and then click the top button, agree to super su to use it and you're done with rooting and cwm! now. these files you were talking about, download them and put them on sd which can be done with a file manager. after they've downloaded go to the lte 2nd init and click the bottom button. it will reboot the phone and take you to cwm. While you are in cwm click on the home button to go to external which is the sd, then go to backup and restore, and click backup! this is very important. miss this step and things could go bad. Now all you have to do is follow the instructions you posted yourself and you should be done! if you need any help don't hesitate to message me. I've done this for a long time now.
Whoops forgot to add. the website IS a reliable source. Learned that cause I'm a risk taker and decided to try it out myself. and do not use rom manager or anything like that for recovery. ever. especially on phones that do not have their own recovery mode. also. the CM10 works great in my opinion! But there's a catch. for me at least. even though everything is perfect during phone calls I cannot use my 4g. which is a bad thing for me cause I need it. other than that if that doesn't bother you or anything or don't have service then knock yourself out and install the cm10!
COMPLETED) This mod worked, all things are now finished except one small issue!
So after installing the mod with some great help of someone here on this forums, I've been basically beta testing the mod for a few days. I have nearly no complaints, as almost everything works seemlessly just like you'd except the operating system to. In the end I found one single issue though, which is terribly annoying for me in specific...
My GPS isn't working, which could be one of many things other than the rom. Seeing as I only recognized It yesterday, there may be an outside reason it at random shut off. If anyone know's what can cause this, and a fix for it please comment back!
Thanks to everyone who helped with installing the mod
Check out www.unleashedprepaids.com. have whole section on lg motion custom ROMs help guides everything u need!
Sent from my LG-MS770 using Tapatalk 4
Please help me with the rom
Hey guys not sure if i am suppose to post this here but i couldnt find any where else and i couldnt find an answer with my exact problem, i installed this rom on my moms lg motion and everything went find untill i got to gapps it came up with an error inside of cwm so i just contined all the other flashes i had to do and rebooted i thought that i could just flash gapps later. But i mad a very big booboo i installed the Recovery APK for it in cm 10 i forgot all about pressing reboot and saying reboot into revocovery so i was going to try it though the Recovery APK so i installed the thing and pressed reboot and instead of taking me into recovery it takes me to a screen that says something like "mourning call error" which i dont know what means but i had to take out the battery and turn the phone back on so that worked and i got back to the home screen but i still cant install gapps so she can use all the google sevices i tried rebooting with the built in reboot into recovery (the one that you press reboot when you hold the power button) and that does the same exact thing i have no way of flashing gapps or anything else for that matter can someone please help me i have no idea what to do. everything i working on the phone but that. thank you sorry if i put this in the wrong place.
Confused my droid using this method- would love in on this thread
Sorry if I'm posting in the wrong place-punch me if I have-
I rooted my lgms770 with version f firmware- installed cwm and 2ndinit recovery (2nd init was the only known way (to me anyway) to get into cwm at the time) followed this guide ---
[LgMotion All Things root] and
[GUIDE] Unbrick OR Unroot LG Motion 4G [KDZ] - Android Forums
I am not allowed to post urls yet...sorry...its the the first google hit
I've tried multiple versions of the official LG Firmware flash, from the website, and by following this guide-
AOKP Dirty Unicorns baseless port cm10 - Android Forums Actually, its the unicorns that got me.
With no luck there. I am running Mint16, and had to run the programs through Wine of course, then tried Q4wine, and eventually tried running though Oracle VM, and finally, I wiped my ancient dell of Linux altogether and put WinXP back on it (took 2 hours, that). No cigar. And yes, I did the drivers, all in order, etc, tried again, reinstalled etc
I finally set up adb to try to get into this droid that way, but am having problems with port permissions (I'm going to guess that's on my pc's end-running Mint16)
I can access the factory reset screen (the black and white), download mode, and the battery charges on a black screen with a nice purple font, but I am still stuck in a bootloop. I've employed all known button spamming combos to get back into cwm (there is a nandroid in there somewhere)..but alas...
Help me Obi-Wan-Kenobi's..
Peach
I had the purple letters with no way to get to the factory reset screen i just used the lg online flash tool in upgrade recovery put in the imei of the phone in made sure the phone was in usb download mode then it was fixed but for some odd reason i still cant get my phone to the factory reset option. I apologize sincerely if I wasn't detailed enough if you need any clarification on it then let me know through pm or i could even send u a link to my box folder i keep the install files in.
(Also i have a one click root app for the LGMS770 So if you or anyone would like the link i would be happy to give it to you)
Sent from my MetroPCS LG-MS770 using Tapatalk