[Q] First-Time Root Attempt; Now Stuck on LG Screen (Mac) - T-Mobile LG G2x

Greetings:
Today, I thought I'd make an attempt to root my phone and put on Cyanogenmod 7 on it. Right now, the screen is stuck with the LG logo and a blue glow next to the logo. I have to do a battery pull to kill it.
I've done the following, all on OS X:
1. Installed the Android SDK and did the "adb devices" command; it was found; also, enabled USB debugging.
2. Loaded flash recovery using Clockworkmod via the VirtualBox instructions on XDA (flash-clockworkmod-recovery.sh).
3. Used Clockworkmod to install the CM7 zip (did the required wipes).
I have conflicting instructions where one mentioned that the reboot after the CM 7 install was supposed to be automatic, and another that said do it manually. I had to go the manual route because when I chose reboot, the screen went black but did not boot up. I had to manually turn on the phone, but I'm not getting any farther than the LG screen.
I know something went amok; I'm hoping that it's just a small thing I might be missing. Please advise.
Thanks!
Velanche

Did you do a full wipe in clockworkmod recovery before flashing CM7? If not go back into clockwork recovery and wipe all user data. Do it a couple of times for good measure. Go under advanced and also wipe dalvik cache. Then also under advanced select fix permissions. Now reboot and be patient. It may take several minutes to boot up the first time.

Thanks a lot for the reply!
I've done the above. But I have a question about the reboot. When I've chosen it in clockworkmod, the screen went black. I take it that means that it's not working correctly? I can do a battery pull and try again in a few minutes to see if it'll work, too.
V.

velanche said:
Thanks a lot for the reply!
I've done the above. But I have a question about the reboot. When I've chosen it in clockworkmod, the screen went black. I take it that means that it's not working correctly? I can do a battery pull and try again in a few minutes to see if it'll work, too.
V.
Click to expand...
Click to collapse
Mine does that sometimes too -- doesn't actually reboot even though I select reboot. Its like it just shuts down instead. I just power the phone back on like normal and wait for it to boot up all the way.

Well it's been about 10 minutes since I've powered up the phone, and other than that faint navy blue glow next to the circle of the icon, I'm not sure if anything is happening. For sure, I didn't see the blue horizontal progress bar at all.
Should I try the whole process again, or is there something else I should check on beforehand?
V.

velanche said:
Well it's been about 10 minutes since I've powered up the phone, and other than that faint navy blue glow next to the circle of the icon, I'm not sure if anything is happening. For sure, I didn't see the blue horizontal progress bar at all.
Should I try the whole process again, or is there something else I should check on beforehand?
V.
Click to expand...
Click to collapse
My next step would be to just try flashing again: Wipe all user data, wipe dalvik cache, flash CM7, flash the latest gapps if u want, fix permissions, and then reboot.

I tried the above; still no change.
I have a feeling I'm missing something, but don't know at the moment how to work backwards.

Yea it should work. Not sure why its not. If you can boot into recovery, wipe, flash the CM7 zip, reboot, that really should be it. Works every time for me. Maybe your download is corrupt and needs to be downloaded again? I'm just making a guess.
How long did you end up waiting once you rebooted and were stuck with the LG logo? Did it ever get to the CM7 logo with the blue/cyan android on the skateboard?

I tried once more. This time though, I may have hit a major snag. I'm unable to start up my phone, at all. I tried powering it with the adapter, and I tried charing the battery. I press the power button, and I press both the power and vol down buttons...I think it's been bricked. I'm at a standstill, at this stage.

My phone's not dead, after all. Somehow, it came back to life.
1. I can boot into clockworkmod via the top power/side vol down combo that gets me the Android splash screen before the amber text.
2. After following your instructions and suggestions, I have to battery pull and power on to get the LG screen. To answer your question, once I power on the LG logo flashes after a few seconds, then reappears and stops. I'd waited as long as 10 minutes before pulling the battery.
3. No sign of the CM7 logo.
Hope this helps. BTW, I wouldn't know how to get my g2x to be recognized on my computer, except for using clockworkmod to mount the SD card.
Thanks!
V.

Related

[Q] Help installing Virtuous Fusion MT4G ROM

So hopefully someone will respond as I'm a new member and can't post directly to the developer forum
I'm trying to install Virtuous Fusion 1.1.6 ROM for mytouch 4g. I'm coming from cyanomogenmod nightly. I followed the instructions on the dev page, but it keeps getting stuck. The steps I took:
1) Backup
2) Reboot to recovery mode
3) Wipe cache, wipe data/factory reset, wipe dalvik
4) Install zip
So it installs successfully, and then I reboot from the recovery menu.
It boots after a little bit to the phone main screen and I let it sit for a few more minutes as per the instructions. This is where the problem occurs.
When I let it sit, the screen goes blank (with the screen-off animation). It sits there for awhile not appearing to be doing anything so I click the trackball wake.. nothing. I click the power button.. nothing. I thought it froze so I battery pull and reboot. Same thing happens. I start over (wipe/reflash) and decide not to battery pull this time.
Same thing happens where it freezes after the screen times out. When I let it sit even longer, it eventually vibrates and reboots by itself, loads to the phone screen, but then sits there after the screen blanks again and appears to do nothing. I let it sit there for >20 minutes and it still seemed to be unresponsive. No response to any physical buttons pressed.
On another attempt, I also tried pulling the ring on the drawer before the screen times out and it goes to some setup screen, but when I click "Next" it just freezes every time.
Also, I tried the same thing with version 1.1.5 before 1.1.6 came out and the exact same thing occurs.
Is there something I am doing wrong? Thanks for the help in advance.
Not that anyone responded, but there is no need anymore. After reflashing to backup, everything started force closing. A soft reboot yielded a frozen mytouch 4g flash screen. In the end the phone bricked itself showing E: cannot mount errors and error formatting /system. Will obtain the eMMC serial later since I did use gfree method.
If your phone will boot to hboot or even recovery then your phone is not bricked. It appears that your recovery is broken. Try flashing a new recovery via fastboot or adb
Sent from my HTC Vision using XDA Premium App
I know there are a lot of posts out there and I've looked through most of them, and it seems that even if you can get into recovery or hboot, if you don't have engineering bootloader you can't fix the problem through adb. Or something like that. I don't have eng bootloader, i have the SHIP s-off. I could connect tried adb to fastboot another recovery and it did 'send' OK, but 'FAILED' (remote: not allowed). I've been reading and reading and frankly don't know what else to do but give up.
bochocinco23 said:
If your phone will boot to hboot or even recovery then your phone is not bricked. It appears that your recovery is broken. Try flashing a new recovery via fastboot or adb
Sent from my HTC Vision using XDA Premium App
Click to expand...
Click to collapse
Wrong bochocinco. Your phone is bricked. Some of the MT4G's have a bad eMMc chip. I am assuming you rooted with the g-free method, because that is the only method that works with the bad chip.

[Q] CM7 Stopped booting

I have a gtablet with CM7.03 on it. It's been working for a while. I hadn't booted it in a while and just tonight I tried to boot it. The cyanogenmod logo comes up and animates for a few minutes, then the screen goes black, the process repeats.
I'm hoping someone can give me some steps to follow to figure out what's wrong. I booted in recovery mode, but wasn't sure what to do first. Should I clear caches? Any expert advice would be appreciated. I'm a programmer, but I'm new to all this Android mod stuff.
I know this is going to sound like a really dumb question, but is it charged? The reason I ask is because you mentioned not turning it on for a while and the battery can drain even then.
If it does have a charge, the only thing I could think of would be (after wiping cache and dalvik and seeing if that works) to wipe data completely IF you have a backup/don't care about starting over.
It does have a charge. I even tried booting it with it plugged in. I just constantly sits on the animated CM7 logo, then goes black, then sits on the logo again.
When I boot to ClockWorkMod recovery, I see:
wipe cache partition
wipe Dalvik cache.
Can I do both of those without losing stuff? If someone can explain what those caches are actually used for, I would really appreciate it.
Well, I couldn't wait and cleared both. Still same problem.
The odd part is that I hadn't changed anything. I'm 99.9% sure it was working. I shut it down, left it plugged in, and then days later tried to boot it.
I can only imagine that an app is starting up on boot that's having issues. Is there a "safe" mode like windows has where I can boot with the minimum OS so I can somehow remove some apps from starting?
Thanks,
Mark
markdemich said:
I have a gtablet with CM7.03 on it. It's been working for a while. I hadn't booted it in a while and just tonight I tried to boot it. The cyanogenmod logo comes up and animates for a few minutes, then the screen goes black, the process repeats.
I'm hoping someone can give me some steps to follow to figure out what's wrong. I booted in recovery mode, but wasn't sure what to do first. Should I clear caches? Any expert advice would be appreciated. I'm a programmer, but I'm new to all this Android mod stuff.
Click to expand...
Click to collapse
What I find odd is the fact that it was running fine before you shut it down for the last time.. The only thing I can think of is there was some sort of low level data corruption before the last time you shut down..
Do you remember installing any new apps or flashing anything like a different kernel, modifying the Build.Prop or anything that may have an adverse effect to normal booting? If so, that may be the cause of your trouble. Since you have at the very least a boot sequence (with Bootloop) it doesn't appear to be a soft brick so that's some good news for you.
I can only suggest if you have a backup use it via recovery mode.
If not you could try and start over from scratch by installing a fresh copy of 7.0.3 (Be sure to Wipe Data and Cache AFTER Flashing) via recovery mode if you can get the zip file copied to your internal SDCard, I say if because with some versions of ClockworkMOD for the GTAB, it will only read from the internal SDCard and not the External SDCard.
The version of CWM I use is v.2.5.1.8 which I believe is also a play on Bekits v.8 but I'm not sure at the moment.
v.2.5.1.8 will mount the USB Storage (External SDCard)via recovery (Mounts & Storage> mount USB Storage) so you can copy the fresh zip file onto it and CWM will read from that card and not the internal SDCard.
If all else fails, you may need to try and NVFlash, which is used to restore the GTAB to its original Out of the Box Condition.. Which should only be used in the event of a Soft Brick...
Good Luck!
markdemich said:
I can only imagine that an app is starting up on boot that's having issues.
Click to expand...
Click to collapse
That and filesystem problems on /data are what I suspect.
Since you are a programmer, do this to find out what's wrong:
1. Switch off gTab.
2. Attach the USB cable to the gTab.
3. Run "adb logcat > logcat.txt" (or "adb logcat | tee logcat.txt" on Unix) on the host PC.
4. Power on gTab.
This will collect logs almost right from the beginning which might hold a clue as to what's wrong.
You might also want to read through these 2 posts:
gTab partitions
gTab SD cards

[Q] Bootloop! Tried ODIN

Hi,
So I got a bootloop after wiping battery status on recovery. But first I wiped cache and dalvik cache (i dont know why i did this). Now, Im on a boot loop and I cant even turn the phone off. I take the battery out and plug it back in and it just loops. Same with taking the battery out and plugging a usb. SO I successfully got to Download mode and got ODIN to recognize the phone. I installed Clockwork
Mod Touch 5.8.1.3 Odin tar. and it says it was succesful, but no luck! Still loops. Is there another .TAR file I can install???
PS: I cant get into Recovery because phone does not turn off.
Please any input is much appreciated, this is driving me nuts.
Wiping battery stats, cache and Dalvik shouldn't cause a bootloop. Wiping Dalvik does cause a very long boot cycle, though, as it causes the system to think it's got all-new apps, and it has to re-process and re-cache them. Are you sure that's not what's going on? How long are you letting it sit for?
Also, are you sure you don't have a stuck power button? I doubt it because you were able to get into download mode and flash a recovery img, but have you tried mashing the button down over and over, even cleaning around the edges of the button with a needle?
mex2309 said:
Hi,
So I got a bootloop after wiping battery status on recovery. But first I wiped cache and dalvik cache (i dont know why i did this). Now, Im on a boot loop and I cant even turn the phone off. I take the battery out and plug it back in and it just loops. Same with taking the battery out and plugging a usb. SO I successfully got to Download mode and got ODIN to recognize the phone. I installed Clockwork
Mod Touch 5.8.1.3 Odin tar. and it says it was succesful, but no luck! Still loops. Is there another .TAR file I can install???
PS: I cant get into Recovery because phone does not turn off.
Please any input is much appreciated, this is driving me nuts.
Click to expand...
Click to collapse
U should definitely go back to stock via odin first before even trying to install cwm and flashing a custom rom.
Sent from my SGH-I727 using xda app-developers app
T.J. Bender said:
Wiping battery stats, cache and Dalvik shouldn't cause a bootloop. Wiping Dalvik does cause a very long boot cycle, though, as it causes the system to think it's got all-new apps, and it has to re-process and re-cache them. Are you sure that's not what's going on? How long are you letting it sit for?
Also, are you sure you don't have a stuck power button? I doubt it because you were able to get into download mode and flash a recovery img, but have you tried mashing the button down over and over, even cleaning around the edges of the button with a needle?
Click to expand...
Click to collapse
I left it on the loop for about 2:30 hours. Still nothing- I cleaned around the power button by taking the case off. Everything looked fine but it still loops. Once I was able to get to Recovery mode but I could only scroll down one line before the phone flashes and goes back to the first command line. This leads me to believe that theres something wrong with the power button, its stuck or a short. Also, I still can't turn if off, as soon as I put the battery in- it turns on w/o me pressing the power button.
I think its a gonner...
I left it on the loop for about 2:30 hours. Still nothing- I cleaned around the power button by taking the case off. Everything looked fine but it still loops. Once I was able to get to Recovery mode but I could only scroll down one line before the phone flashes and goes back to the first command line. This leads me to believe that theres something wrong with the power button, its stuck or a short. Also, I still can't turn if off, as soon as I put the battery in- it turns on w/o me pressing the power button.
mex2309 said:
I think its a gonner...
Click to expand...
Click to collapse
It's alive! Finally i got it to boot up. I don't know how or why. I tried to go to Recover mode and this time I got in and was able to cycle through the menu. I reinstalled the latest ROM I used and it booted up. Strange.... but I'm happy.
mex2309 said:
I left it on the loop for about 2:30 hours. Still nothing- I cleaned around the power button by taking the case off. Everything looked fine but it still loops. Once I was able to get to Recovery mode but I could only scroll down one line before the phone flashes and goes back to the first command line. This leads me to believe that theres something wrong with the power button, its stuck or a short. Also, I still can't turn if off, as soon as I put the battery in- it turns on w/o me pressing the power button.
It's alive! Finally i got it to boot up. I don't know how or why. I tried to go to Recover mode and this time I got in and was able to cycle through the menu. I reinstalled the latest ROM I used and it booted up. Strange.... but I'm happy.
Click to expand...
Click to collapse
Glad you got back into your phone. I am starting to see this happening a lot lately with ROMS. Which particular one were / are you on when it started the boot loop?
MasterDecker said:
Glad you got back into your phone. I am starting to see this happening a lot lately with ROMS. Which particular one were / are you on when it started the boot loop?
Click to expand...
Click to collapse
Sounds similar to what I just went through... Except I didnt do anything in recovery before mine started looping. Curious to know what rom you were running as well.
MasterDecker said:
Glad you got back into your phone. I am starting to see this happening a lot lately with ROMS. Which particular one were / are you on when it started the boot loop?
Click to expand...
Click to collapse
I was on the Seanscreamz' ICS ROM. I never had a problem with his ROMs before and I've been using them for about a year. They are pretty solid and I recommend them. It had to do something with me wiping caches and wiping battery stats because it happened shortly after. But I'm just guessing.
mex2309 said:
I was on the Seanscreamz' ICS ROM. I never had a problem with his ROMs before and I've been using them for about a year. They are pretty solid and I recommend them. It had to do something with me wiping caches and wiping battery stats because it happened shortly after. But I'm just guessing.
Click to expand...
Click to collapse
I'm trying to wrap my head around that, and not coming up with anything valid. Wiping the caches would cause a much longer boot time, battery stats, at most should only cause you to need to remove and reinsert the battery.
Just about the only thing I could come up with would be that when you wiped the caches, was that your phone was trying to reload all that data back into the cache and was getting brain dead.
More information is needed from others that have had the same issue, on the same ROM, or different does not matter, but detailed info as to what exactly was done prior to the boot loop issues.
If my phone gets stuck in a boot loop, usually after I flash someting in Odin or whatever, if I hit factory reset it fixes itself.
It doesn't bother me since all my stuff is backed up though.
You should Odin back to stock then flash cwm
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
just got a phone off of craigslist.. saw that it booted up, so i figured i might be able to fix it. cost me $100.
just finished ODINing it, but it just continues to bootlop. not sure what to do next.
Flash a recovery in Odin and see if you can enter recovery. Wipe data/factory reset if you get there.
hechoen said:
Flash a recovery in Odin and see if you can enter recovery. Wipe data/factory reset if you get there.
Click to expand...
Click to collapse
already did that.. flashed CWM, ran recovery and installed rom. no go. now i see the cyanogen boot screen, but it won't get past that. this is kind of strange.
i think the issue with this phone is hardware related. constantly the phone turns itself off. i eventually was able to get stock rom to work (not sure how), but it goes haywire. wifi works, but for whatever reason, i can't download from the play store.
also, when im in CWM.. it reboots randomly. sometimse pressing the power button hits twice too. my old i777 has gone haywire too.. i might have to rethink what i will be choosing for my next phone.
mistabeo said:
i think the issue with this phone is hardware related. constantly the phone turns itself off. i eventually was able to get stock rom to work (not sure how), but it goes haywire. wifi works, but for whatever reason, i can't download from the play store.
also, when im in CWM.. it reboots randomly. sometimse pressing the power button hits twice too. my old i777 has gone haywire too.. i might have to rethink what i will be choosing for my next phone.
Click to expand...
Click to collapse
I did what I could to try to replicate your situation. Which version of CWM are you installing? I went through several different versions up to the latest and found that the phone was having an issue with CWM itself. (possibly corrupted driver, but not 100% sure on that, as the phone does get recognized by the computers.)
But when I got to the latest CWM, and it started doing similar to yours, what I did was the following.
#1 : reinstall drivers
#2 : plugged the phone into the USB 2.0 slot on my laptop.
#3 : removed the battery, sim card, SD card
#4 : tried to power on the phone holding the power button for approximately 20 seconds. (nothing)
#5 : put in the battery while still plugged in, and powered on.
#6 : After phone booted up, and computer recognized the phone, I removed the battery. Phone stayed on.
#7 : waited while the computer re installed the ADB drivers, after driver install success, I unplugged the phone. Of course it powered down.
#8 : Restarted the laptop, put the battery back in the phone, and held vol + and - and power. Phone rebooted into recovery, but got into a boot loop when trying to recover.
#9 : downloaded TWRP recovery and put it on the SD card for the phone. Restarted the phone into recovery and installed TWRP recovery.
#10 : Rebooted phone into TWRP recovery. wiped all cache, installed latest STOCK ROOTED ROM.
The phone has been stable and working just fine, no wifi or blue tooth issues, calls are as normal, texting is as normal. LTE speeds as normal.
I have since switched all my devices over to TWRP recovery and have had ZERO issues.

[Q] I think I really do have a brick!

All right. I messed up. I installed PureMotive's v15 and after Aroma was finished, I clicked "reboot" and....nothing. It briefly flashed the Samsung splash screen, but never did anything past that. It wont boot. It won't boot into recovery. It won't even boot into Download mode to try to Odin back....
It DOES display a charging icon when plugged in via USB. ODIN DOES recognize that something has been plugged in to a COM port; however, it hangs on trying to connect to device (i figured it would, as i can't get into download mode...)
FWIW:
Came from Jovy's last release. Was on Mastamoon's 10.1 prior
Full wipe, cache wipe, dalvik wipe.
I did select custom option, Verizon s3, and the bottom kernel on the Aroma list (forget which one....Ktoonz?)
Not sure what to do, as I have never been here before...
EDIT: ADB not working either....very strange. when trying to run a logcat, it just says waiting for device. Maybe I'm doing something wrong? I'm not terribly proficient at ADB...I am getting a bit concerned though....
i5aac said:
All right. I messed up. I installed PureMotive's v15 and after Aroma was finished, I clicked "reboot" and....nothing. It briefly flashed the Samsung splash screen, but never did anything past that. It wont boot. It won't boot into recovery. It won't even boot into Download mode to try to Odin back....
It DOES display a charging icon when plugged in via USB. ODIN DOES recognize that something has been plugged in to a COM port; however, it hangs on trying to connect to device (i figured it would, as i can't get into download mode...)
FWIW:
Came from Jovy's last release. Was on Mastamoon's 10.1 prior
Full wipe, cache wipe, dalvik wipe.
I did select custom option, Verizon s3, and the bottom kernel on the Aroma list (forget which one....Ktoonz?)
Not sure what to do, as I have never been here before...
EDIT: ADB not working either....very strange. when trying to run a logcat, it just says waiting for device. Maybe I'm doing something wrong? I'm not terribly proficient at ADB...I am getting a bit concerned though....
Click to expand...
Click to collapse
Pull battery hold down power home and vol ip button simultaneously to get to recovery. Hopefully you made a back up prior.
Sent from my SCH-I535 using xda app-developers app
i5aac said:
All right. I messed up. I installed PureMotive's v15 and after Aroma was finished, I clicked "reboot" and....nothing. It briefly flashed the Samsung splash screen, but never did anything past that. It wont boot. It won't boot into recovery. It won't even boot into Download mode to try to Odin back....
It DOES display a charging icon when plugged in via USB. ODIN DOES recognize that something has been plugged in to a COM port; however, it hangs on trying to connect to device (i figured it would, as i can't get into download mode...)
FWIW:
Came from Jovy's last release. Was on Mastamoon's 10.1 prior
Full wipe, cache wipe, dalvik wipe.
I did select custom option, Verizon s3, and the bottom kernel on the Aroma list (forget which one....Ktoonz?)
Not sure what to do, as I have never been here before...
EDIT: ADB not working either....very strange. when trying to run a logcat, it just says waiting for device. Maybe I'm doing something wrong? I'm not terribly proficient at ADB...I am getting a bit concerned though....
Click to expand...
Click to collapse
You didn't brick your phone as it would cease to function.
jmxc23 said:
You didn't brick your phone as it would cease to function.
Click to expand...
Click to collapse
It really has ceased to function. Battery pull to recovery doesn't work. Battery pull to download mode doesn't work. the only sign of life whatsoever is the samsung splash (just for a second), then nothing. plugging the phone in shows a charging animation, but nothing from there.
I've never ran into this but will the phone boot into recovery or download mode if the battery is down to a certain percent? Maybe the battery is dead. Charge it for a few hours and try again.
bobAbooE said:
I've never ran into this but will the phone boot into recovery or download mode if the battery is down to a certain percent? Maybe the battery is dead. Charge it for a few hours and try again.
Click to expand...
Click to collapse
battery is nearly full
jmxc23 said:
You didn't brick your phone as it would cease to function.
Click to expand...
Click to collapse
+1
Bricked phone is a lifeless paper weight.
I believe the correct term for your phone is soft bricked?
Sorry for having no help though :/
sent from that young galaxy on clean ROM!
~ $ adb devices (You have adb setup on your computer right???)
~ $ adb reboot recover # this obviously will get you into recovery
~ $ adb reboot bootloader # this will boot you into download mode
If none of this works im pretty sure Adam Outer has a work around to unbrick the S3. Google is your friend.

[Q] Now I am at a point I want to keep, but...

Hi and Thanks to all the help that I have found here since my problem started a week ago. I am a Noob. I
PHP:
am becoming an informed Noob.
I am copying my response post from http://forum.xda-developers.com/showthread.php?p=37915235#post37915235 her as it outlines my trail;
Begin cut n paste:
Quote:
Originally Posted by MrKickstand View Post
Are you rooted?
Sent from my SGH-I997 using xda app-developers app
Same response:;
[B]Infuse 4G Firmware 2.3.6 ;Baseband 1977UCLB3;Kernal 2.6.35.7-1997UCLB3-CL997492; Build Gingerbread.UCLB3[/B]
[I]Superuser present and active. ADB Root response same= "adbd cannot run as root in production builds"
[I]When I power off and and press the power button, all I get is the progress wheel and an empty battery logo, over and over. Remove battery, count to 10, reinsert battery, after a couple of seconds the progress wheel then nothing.Press and hold power button same as previous. I can not enter recovery, I can enter download and that's the only way I can boot currently is by re-flashing with ODIN the 1997UCLB3.tar.md5. I can reboot with adb reboot. (Nothing happens when I use the 3 button to get into recovery since before the first Odin Flash.)
History: First occurrence Thursday 2/21/13 with no charging when plugged into the charger (3 tried) Read most of the posts here regarding no charge and boot loop (never got to SAMSUNG logo). Downloaded ODIN and the above ROM and re-flashed when my phone booted, I had everything and was rooted. I was happy until I turned it off and tried to turn back on. same progress wheel and empty battery, I re-flashed and did a hard reset, re-flashed and now my data was gone, reinstalled some things, turned the phone off, same no start. Used heimdall back to stock and when running, as expected, but when off, no start.
Yesterday I downloaded SDK and could ADB reboot. Then I dismantled my phone and cleaned what little just had gotten inside, inspected the power button with magnification and noted nothing wrong reassembled inserted battery and pressed power, same results. Re-flashed to get up and tested all functions which seem to working. I have dropped the phone intentionally several time to no avail.
I can turn the screen off with the power button and wake it up. I can lock the camera with the power button and wand unlock it. I don't know if there is an additional circuit connected to the power button for start and I really need to re-solder ( a little scary for me) with a sharp tip and steady hand. I am considering purchasing a cracked screen phone on eBay and swapping mother boards.
At present, I just don't turn the phone off and use Airplane mode at night. I appreciate the work that I see on this forum and will be grateful for any solutions.[/I]
End cut n paste:
Since that date: I have factory reset a few times due to rebooting via download mode and flashing via Odin because upon reflash I lose my mobile connectivity (No wireless service, IMEI as if the Sim was not in) Reset fixed that but of course I had to reinstall all my Apps, google acct. etc (My restore will not come up to clear cache and reboot. I do not have a Recovery mode nor a back up and numerous attempts to get CWM have failed.
I do not intend to turn this phone off until I get a replacement which should be in my hands Tuesday. I am asking for a clean GB rom for Odin that will let me reboot without changing anything. I have jscott30's unbrick Roms that have gotten me where I am and don't want to reflash back to stock anymore, Thanks a 1 to the 1oth power jscott 30 and to qkster for his guides. Without the recovery, I am at a loss of what to do. So I will be cool with a point to a clean UCLB3 Rom to reflash should my phone freeze before Tuesday
Thanks and Make a woman Happy today for Valentines
After you go back to stock and flash a working cwm kernel make sure you release power on logo keep holding vol buttons for at least a min,sometimes it takes a few.I'm sure you did but some people don't.
Sent from my SGH-I997 using Tapatalk 2
I never get to the Logo
Thanks, but I never get to the LOGO.
I tried to flash a CWM kernal and it failed with an error on reboot about something not being formatted, At each "return to stock" Odin, I select the format button and since I can't get to recovery on my own, use the Settings, Privacy, Factory reset with Fromat USB, I have the 1997UCLB3-roo.tar.md5 that I will use if my phone turns off or goes dead to reflash back to life.
TJj33p3rz said:
After you go back to stock and flash a working cwm kernel make sure you release power on logo keep holding vol buttons for at least a min,sometimes it takes a few.I'm sure you did but some people don't.
Sent from my SGH-I997 using Tapatalk 2
Click to expand...
Click to collapse
Oldbutnew said:
Thanks, but I never get to the LOGO.
I tried to flash a CWM kernal and it failed with an error on reboot about something not being formatted, At each "return to stock" Odin, I select the format button and since I can't get to recovery on my own, use the Settings, Privacy, Factory reset with Fromat USB, I have the 1997UCLB3-roo.tar.md5 that I will use if my phone turns off or goes dead to reflash back to life.
Click to expand...
Click to collapse
if you can use odin,
flash jesse's option c.
this will give you the base rom with lidroid boot into recovery option
download this: http://forum.xda-developers.com/showthread.php?t=1702026
flash it in cwm. use the back up the whole rom option.
this will back up just about your whole setup at any one point and make restoring easier.
you had mention about not being able to get into recovery...
what i was wondering is: while running the rom, if you use the pull down status bar menu, go to the far right, there are some reboot options..one of which is recovery..what happens if you choose that option?
Thanks qkster!
I think I tried Option C a couple of days ago and something didn't go right. I figured it was because I couldn't wipe the cache in recovery. I had aslso attempted your kernal flash using the program you recommended. On reboot I got the something not formatted right. I had used my laptop and USB to copy the kernal file to a folder I made in the Infuse. But to be clear. Since I can't clear the caches in recovery, just flas option c, selecting PDA? (No PIT or phone?)
I do want to get the C.
As for the infuse Toolkit, you mean after I get CWM vis Jesse's option C?
You ask about the pull down status bar "when running ROM" is that in ODIN it self? I am not sure where you mean,
Thanks for your patience,
qkster said:
if you can use odin,
flash jesse's option c.
this will give you the base rom with lidroid boot into recovery option
download this: http://forum.xda-developers.com/showthread.php?t=1702026
flash it in cwm. use the back up the whole rom option.
this will back up just about your whole setup at any one point and make restoring easier.
you had mention about not being able to get into recovery...
what i was wondering is: while running the rom, if you use the pull down status bar menu, go to the far right, there are some reboot options..one of which is recovery..what happens if you choose that option?
Click to expand...
Click to collapse
Oldbutnew said:
Thanks qkster!
I think I tried Option C a couple of days ago and something didn't go right. I figured it was because I couldn't wipe the cache in recovery. I had aslso attempted your kernal flash using the program you recommended. On reboot I got the something not formatted right. I had used my laptop and USB to copy the kernal file to a folder I made in the Infuse. But to be clear. Since I can't clear the caches in recovery, just flas option c, selecting PDA? (No PIT or phone?)
I do want to get the C.
As for the infuse Toolkit, you mean after I get CWM vis Jesse's option C?
You ask about the pull down status bar "when running ROM" is that in ODIN it self? I am not sure where you mean,
Thanks for your patience,
Click to expand...
Click to collapse
I'm wondering if you may have several things confuse..or at least the terminology anyway.
In order to flash Jesse's option C, you have to be in DOWNLOAD mode (DL or dl) and flashed with Odin on your PC.
When you have the phone running, if you touch the top of the screen and pull it down, you have the status bar menu. You can sweep the icons to the right for additional options.
if you are looking to wipe cache for what ever reason, here is one option without using recovery menu:
https://play.google.com/store/apps/...251bGwsMSwxLDEsIm1vYmkuaW5mb2xpZmUuY2FjaGUiXQ..
if you are looking for an easy way to get into recovery, here is another app:
https://play.google.com/store/apps/details?id=com.siriusapplications.quickboot&hl=en
It's making progress
qkster said:
I'm wondering if you may have several things confuse..or at least the terminology anyway.
In order to flash Jesse's option C, you have to be in DOWNLOAD mode (DL or dl) and flashed with Odin on your PC.
When you have the phone running, if you touch the top of the screen and pull it down, you have the status bar menu. You can sweep the icons to the right for additional options.
if you are looking to wipe cache for what ever reason, here is one option without using recovery menu:
[I can't post links yet}
feature=search_result#?t=W251bGwsMSwxLDEsIm1vYmkuaW5mb2xpZmUuY2FjaGUiXQ[/url]..
if you are looking for an easy way to get into recovery, here is another app:
{del} /play.google.com/store/apps/details?id=com.siriusapplications.quickboot&hl=en[/url]
Click to expand...
Click to collapse
It's most likely my attempt to communicate with unfamiliar terms:
I can and always have been able to get into Download Mode, and flashed Jesse's C via Odin that way. Originally back at the beginning, It was Odin and Jesse's B that got my phone up. but it didn't solve the problem of not being able to turn the phone on with the power button. It was Wednesday evening that I attempted to load the kernel you had to add CWM, that's when it failed and then the Jesse C failed on Odin and I had no wireless connection or IMEI etc. Back to your unbrick then the factory reset with phone running and using the Privacy menu.
Until I downloaded the Quick Boot at your recommendation, I have not been able to enter Recovery from a phone in the off status. (Recovey ran at the end of each Odin flash). Thanks also for the Cache Cleaner.
Now when I pull down my top bar, nothing scrolls left to right or right to left and I don't ever recall seeing that happen in the last 1.5 years.MIne just shows L-R Wifi; Blue T; GPS; Flight Mode; Screen rotation.
Now I am good as long as the phone doesn't freeze and I have to remove the battery. I have in those cases I have re flashed Jesse's B to bring the phone up. Only the last time I ended up with no wireless (No Sim recognized and it was installed), and I went back to stock to regain it. So I am a bit paranoid about re-flashing anything new now. But knowing me I will before the weekend is done. The Reboot app is what I have been trying to figure out how to do. When I get the new phone and get it up and running and stable, I'll attempt to re melt the on button solder and possible the USB connector solder too. USB connection now dies if the screen time out turns the screen off. (If i keep the screen alive by doodling on it no problem transferring files.)
Thanks for your help I am a bit compulsive so all of this is my current obsession.:laugh::laugh:
Oldbutnew said:
Now when I pull down my top bar, nothing scrolls left to right or right to left and I don't ever recall seeing that happen in the last 1.5 years.MIne just shows L-R Wifi; Blue T; GPS; Flight Mode; Screen rotation.
Thanks for your help I am a bit compulsive so all of this is my current obsession.:laugh::laugh:
Click to expand...
Click to collapse
you're right about the status bar..looking over jesse's description, you would have to flash the lidroid as an extra
http://forum.xda-developers.com/showthread.php?t=1698972
there is something odd about your phone though...possible hardware issues...you should not have to keep screen on to complete a background task.
under Display..there should be an option to keep the screen on longer than default if you it
gl
I do believe it's hardware too.
qkster said:
you're right about the status bar..looking over jesse's description, you would have to flash the lidroid as an extra
http://forum.xda-developers.com/showthread.php?t=1698972
there is something odd about your phone though...possible hardware issues...you should not have to keep screen on to complete a background task.
under Display..there should be an option to keep the screen on longer than default if you it
gl
Click to expand...
Click to collapse
I set it on 2 minutes and touch the screen often. Funny it doesn't have an issue in DL mode, Sometimes I wiil have SUB Connected and no charging and It'll connect in the back ground, lose connection repeatedly and all of a sudden show the charging Icon, which I haven't see since all this began 9 days ago.
This phone has had some big drops. last one about 4 days before this began, vibrated off my table saw onto the concrete floor,
Thanks.
New phone works as advertised
Oldbutnew said:
I set it on 2 minutes and touch the screen often. Funny it doesn't have an issue in DL mode, Sometimes I wiil have SUB Connected and no charging and It'll connect in the back ground, lose connection repeatedly and all of a sudden show the charging Icon, which I haven't see since all this began 9 days ago.
This phone has had some big drops. last one about 4 days before this began, vibrated off my table saw onto the concrete floor,
Thanks.
Click to expand...
Click to collapse
Ok eBay phone arrived this afternoon. Factory reset, Odined, Jesse's C option. Yeah, CWM recover. I loaded most of my programs and backed up my ROm. I will experiment on my old one now.
New thing happening. I still can't start the phone from Off. BUT if I plug in the charger and hold down the on button and the down volume button after a few cycles of the dead battery icon, I get a charging icon and the phone is charging. Now with that icon working I can hold the power button down and the phone starts. Charger or USB need to be plugged in for that to work.
Update on the Start button.
Oldbutnew said:
Ok eBay phone arrived this afternoon. Factory reset, Odined, Jesse's C option. Yeah, CWM recover. I loaded most of my programs and backed up my ROm. I will experiment on my old one now.
New thing happening. I still can't start the phone from Off. BUT if I plug in the charger and hold down the on button and the down volume button after a few cycles of the dead battery icon, I get a charging icon and the phone is charging. Now with that icon working I can hold the power button down and the phone starts. Charger or USB need to be plugged in for that to work.
Click to expand...
Click to collapse
Thursday Update:
Recap of current state:
Factory Reset from phone/security/fatory reset.
Flashed Jesse's C option with odin https://www.facebook.com/jennifer.waddell.963/photos_stream?ref=ts and let it boot all the way. Next I down loaded Quickboot (see qksters link above) and restarted in Recovery. Voila Red CWM. Cleared cache; factory reset; Advanced cleared davlik cache. Rebooted and let it fully load. Turned off to enter download.mode and Odined a second time Option C.Everything looked good on all accounts, reentered Google data etc. like a factory reset requires. Re installed Quickboot and booted to CWM and backed up my ROM.
I turned the phone off and the start button wouldn't work still, but I held it a long time with the down volume button (not sure this is necessary, just what I did) and all of a sudden instead of the dead battery logo, I got a charging battery logo and it was 87% charged. First time I had seen this in while. I pressed and held the power button and the Samsung Logo came up and the phone booted. (Slow boot compared to the new Infuse I now have.) So now my old phone was working, but not up to 100%.
I charged the battery to 100% and turned it off and left it off for the day/night. Yesterday I got it to turn on with all the buttons pressed and it booted, said connect battery charger/low battery 1%, h'mmm. I charged again to 100% and turned it off all day and night. Same issue this morning. Something is draining the battery when fully off. SO I still have a hardware issue I believe, just not sure what it is.
Thanks for any insight, I'll keep experimenting.
Oldbutnew said:
Thursday Update:
Recap of current state:
Factory Reset from phone/security/fatory reset.
Flashed Jesse's C option with odin https://www.facebook.com/jennifer.waddell.963/photos_stream?ref=ts and let it boot all the way. Next I down loaded Quickboot (see qksters link above) and restarted in Recovery. Voila Red CWM. Cleared cache; factory reset; Advanced cleared davlik cache. Rebooted and let it fully load. Turned off to enter download.mode and Odined a second time Option C.Everything looked good on all accounts, reentered Google data etc. like a factory reset requires. Re installed Quickboot and booted to CWM and backed up my ROM.
I turned the phone off and the start button wouldn't work still, but I held it a long time with the down volume button (not sure this is necessary, just what I did) and all of a sudden instead of the dead battery logo, I got a charging battery logo and it was 87% charged. First time I had seen this in while. I pressed and held the power button and the Samsung Logo came up and the phone booted. (Slow boot compared to the new Infuse I now have.) So now my old phone was working, but not up to 100%.
I charged the battery to 100% and turned it off and left it off for the day/night. Yesterday I got it to turn on with all the buttons pressed and it booted, said connect battery charger/low battery 1%, h'mmm. I charged again to 100% and turned it off all day and night. Same issue this morning. Something is draining the battery when fully off. SO I still have a hardware issue I believe, just not sure what it is.
Thanks for any insight, I'll keep experimenting.
Click to expand...
Click to collapse
it could be your battery that is bad.
try a new one if you have not tried several others:
http://www.ebay.com/itm/New-Premium...902705?pt=PDA_Accessories&hash=item27ca3fca31
qkster said:
it could be your battery that is bad.
try a new one if you have not tried several others:
http://www.ebay.com/itm/New-Premium...902705?pt=PDA_Accessories&hash=item27ca3fca31
Click to expand...
Click to collapse
I have tried several other batteries now with the same results.
Yesterday, I decided it would be a good idea to use this phone as a practice platform for a Jelly Bean upgrade.with scott.hart.bti's http://forum.xda-developers.com/showthread.php?t=1776129
Everything went as advertised and I was pretty happy for a while. I was following the instructions quite literally and after flashing the CM9, I removed the external SD card and that messed up getting back into recovery, but I got there. From reading, I understand that I need the IC flash to preserve the EFS file, but not absolutely sure that I can't remove the SD card before starting the process altogether. CM9, then CM10.
Since all my programs needed to be re-downloaded and installed, I had the "Bright idea" to restore the backup in CWM that I did just before the upgrade. Bad idea, now I had a phone that would not boot.
Is there a way to upgrade to JB and not have to re-install all my programs? I will try the Nandroid backup in CWM
To get back working again, I could get into download mode, but not recovery, so I did J scotts back to stock, then the option C to get CWM and used quick boot to get into recovery and reflashed with an experiment of using your Quick wipe in stead of factory reset on this go. Again when I took the SD out at the finish of the CM9 I had a little trouble getting into the recovery to continue. When it did get to recovery, I finished flashing per the instructions, but when it booted I only had a partial group of programs, Google play was the most notable omission. I took a deep breath and did a factory reset, and managed to get into recovery and started with a flash of CM10 again and this time all ok.
I did a couple of boots with quick boot and powered down for the night with it plugged into the charger. This morning I can not get anything up. Battery charging icon shows and goes away (CM10 battery logo) I can get into download, but not recovery and don't really want to Odin back to stock and go from there, but may do that and leave it in GB while I update the new phone.
My conclusion is that it's hardware and possibly USB connector. IN GB the USB cable wouldn't connect so I used Software data cable. In JB it worked. Still confusing, but I'll keep at it.
Thanks for your patience and my learning curve!

Categories

Resources