Database Info

[Q] I think I killed my Nexus S! Please help! (unlocking process/rooting stuff)

So, this is what has happened so far:
I googled for a small and easy to follow guide to unlock my phone so that I can later on install a custom rom. I followed the steps provided here:
http://nexusshacks.com/nexus-s-hacks/how-to-root-nexus-s/
What I didn't notice on the first place was the "UPDATE: DO NOT FOLLOW THIS GUIDE INSTEAD Please see new root method which works on all Nexus S and Nexus S 4G!" link. Don't ask why - really don't know.
The result was having my Nexus S stuck on a screen that shows Google logo on the middle and an unlocked padlock on the bottom.
It seemed, or to be exact, I figured out that, the problem was the .img file mentioned on some point in the middle of this.. tutorial.
So, I decided to follow the newer guide that can be found here:
http://nexusshacks.com/nexus-s-hacks/how-to-root-nexus-s-or-nexus-s-4g-new/
Although all went well (didn't have to go all over the same processes up to the .img installatin point), I ended up with the same screen that shows Google logo on the middle and an unlocked padlock on the bottom.
I figured out that I could just install a rom at this point, and decided that I should go back to stock. So, I followed this guide here:
http://nexusshacks.com/nexus-s-hacks/how-to-unroot-nexus-s-i9020ti9020ai9023/
But, when I choose to install the .zip file, I get this error:
assert failed: "getprop ("ro.product.device") == "crespo" || "getprop ("ro.product.device") == "crespo"
E: Error in /sdcard/i9020t_i9023.zip
(status 7)
Installation aborded
..let me add to this point that I have bought my Nexus S from EU, it is an i9023. Let me also add that all I wanted is to flash an ICS rom and I think I have ended with a f****d device I don't know what to do with!
Any help, really, would be so much appreciated since I need to use this phone. I have a backup for calls etc but I need some smartphone features!

I seriously doubt you killed your Nexus S. Temporarily disabled is more like it.
From off position, hold down Power + VOL-UP. You should be greeted with a screen with a green android and 4 options. If you can get there, that's the bootloader, and unless you manage to kill it (which is VERY hard to do), you can reflash everything from there via usb and adb.
What model Nexus S do you have? That's important for helping you to flash it.

nickmv said:
I seriously doubt you killed your Nexus S. Temporarily disabled is more like it.
From off position, hold down Power + VOL-UP. You should be greeted with a screen with a green android and 4 options. If you can get there, that's the bootloader, and unless you manage to kill it (which is VERY hard to do), you can reflash everything from there via usb and adb.
What model Nexus S do you have? That's important for helping you to flash it.
Click to expand...
Click to collapse
Yes, I can enter this menu - there already. My model is an i9023GSM.

OK, then you DONT have a dead phone. You just need to reflash it correctly.
I'm sorry I can't be helpful for longer, because I am at work,but follow this guide and make sure you follow every detail (take note of step 6 in particular).
I know it's a long guide, but it's VERY detailed, and should get you up and running.
On a side note, for ROM selection, are you looking for an Ice Cream Sandwich alpha ROM (android 4.0) (less stable) or the older Gingerbread ROMs (2.3.7)?

nickmv said:
OK, then you DONT have a dead phone. You just need to reflash it correctly.
I'm sorry I can't be helpful for longer, because I am at work,but follow this guide and make sure you follow every detail (take note of step 6 in particular).
I know it's a long guide, but it's VERY detailed, and should get you up and running.
On a side note, for ROM selection, are you looking for an Ice Cream Sandwich alpha ROM (android 4.0) (less stable) or the older Gingerbread ROMs (2.3.7)?
Click to expand...
Click to collapse
You gave me the good news so, thank you for that. Now, I should follow this guide and come back in case I have a problem.
As far as the rom, I wanted to flash an ICS since I cannot wait any longer for Google to release the official update. But right now, anything that can get my device up and running would be really good!

Edit: nvm. >_<

kijp15 said:
Why don't you just use shabby's one click root. Simple & much easier. Saves all sorts of troubles.
Click to expand...
Click to collapse
Will this solve the problem I'm facing? If yes, then it's fine by me.
Ok, just saw the edit, no worries!

nickmv said:
but follow this guide and make sure you follow every detail (take note of step 6 in particular).
I know it's a long guide, but it's VERY detailed, and should get you up and running.
Click to expand...
Click to collapse
OK, stuck already. On Part 2 what I understand is that I have to open the CMD and copy-paste the path to the "tools" folder? Because this is what I do, and after - since this is what I have understand - I type "fastboot oem unlock" and I get "'fastboot' is not recognized as an internal or external command,
operable program or batch file."
What do I do wrong?
EDIT:
Tottaly stuck on Part 2. It seems that there is no fastboot.exe file inside "tools" folder. I don't think the problem is something else - I'm sure I give the right commands since I tryied for fun another folder I have with fastboot.exe inside and it worked - to be exact it just gave me a FAILED messsage since device is already unlocked. Plus, regarding Part 3, Step 1, the first file for download is missing so I used the second link and downloaded 5023-cyan file. Hope this was a right move to do.
EDIT 2:
Ok, here is the story so far: I followed the guide given step by step. The USB drivers has been installed correctly so the device can be connected to the PC.
In the "tools" folder there was no such fastboot.exe file so I manually added one that I've found on the newer guide given on the 1st post. The unlocking process is failing because the device is already unlocked.
I did manage to install after this, the 5023-cyan.img file since this is the only link working from Part 3, Step 1. This gone well too!
Now, I couldn't go on with Part 4, I mean, I could not install the .zip file as it describes so through recovery mode I installed the .zip file succesfully (confirmation message to Nexus S screen).
I reboot and still get the same Google logo on the middle and an unlocked padlock on the bottom.
I cannot understand what I do so wrong? Oh, I'm so disappointed..

OK, people, head's up! I did manage to install the latest stable rom of cyanogenmod and the phone is up and running! It means that somehow everything went well! Now, how do I return back to OEM? Because I just need to make things as they where before..
..or should I give cyanogenmod a chance?

http://forum.xda-developers.com/showthread.php?t=1063664 or use ROM manager and select Stock ROM (you should then receive OTA upgrades to 2.3.6).
On the latter: You colud just back up different ROMs and switch between them using CW.

skatastamoutrasas said:
Will this solve the problem I'm facing? If yes, then it's fine by me.
Ok, just saw the edit, no worries!
Click to expand...
Click to collapse
If you are still facing problems. Try locking your bootloader again with this method. Then it will let you go back on stock. Use v3 it is stable solid and easy to use.
Nexus S + CM9 kangs = Awesomeness

mixtapes08 said:
If you are still facing problems. Try locking your bootloader again with this method. Then it will let you go back on stock. Use v3 it is stable solid and easy to use.
Nexus S + CM9 kangs = Awesomeness
Click to expand...
Click to collapse
Can you give me a CM9 kangs link since as new here, I'm kinda lost?

Ok new problem this time! After I installed my 3rd rom (probably, a totall noob thing to do) which was the OEM one, I tryied to re-enter recovery mode to wipe all data and re-install the rom I want. But now I get this mark of the small green android with a big exclamation mark on top of his head. What is this new hell that found me?

skatastamoutrasas said:
Ok new problem this time! After I installed my 3rd rom (probably, a totall noob thing to do) which was the OEM one, I tryied to re-enter recovery mode to wipe all data and re-install the rom I want. But now I get this mark of the small green android with a big exclamation mark on top of his head. What is this new hell that found me?
Click to expand...
Click to collapse
Try re-flashing the recovery. Either threw rom manager or fastboot.
Fastboot flash recovery "nameofrecovery".img

kijp15 said:
Try re-flashing the recovery. Either threw rom manager or fastboot.
Fastboot flash recovery "nameofrecovery".img
Click to expand...
Click to collapse
Worked just fine! Thank you!

skatastamoutrasas said:
OK, people, head's up! I did manage to install the latest stable rom of cyanogenmod and the phone is up and running! It means that somehow everything went well! Now, how do I return back to OEM? Because I just need to make things as they where before..
..or should I give cyanogenmod a chance?
Click to expand...
Click to collapse
Nice, glad to see you managed to get it working. Honestly, the hassle is kind of worth it, because you learn more about the process anyways.
That being said, give CyanogenMod a chance. There's also several other ROMs. Unless you need stock OS for warranty service, I'd recommend going with one of the many custom ROMs we have here.
There are several minimalistic AOSP-built ROMs that mimic the feel of the stock OS, but are optimized for speed, and still have some very nice tweaks that you may enjoy. Just take a look through the dev section, and you'll see we have tons of options.

nickmv said:
Nice, glad to see you managed to get it working. Honestly, the hassle is kind of worth it, because you learn more about the process anyways.
That being said, give CyanogenMod a chance. There's also several other ROMs. Unless you need stock OS for warranty service, I'd recommend going with one of the many custom ROMs we have here.
There are several minimalistic AOSP-built ROMs that mimic the feel of the stock OS, but are optimized for speed, and still have some very nice tweaks that you may enjoy. Just take a look through the dev section, and you'll see we have tons of options.
Click to expand...
Click to collapse
It did worth the hassle, that's for sure. Now I think it's so easy to unlock a Nexus plus I now have a little more knowledge regarding Android .
I will stick with CM 2.3.7 as it looks just fine. I don't care about warranty, I don't think I will ever need the official service for a software issue. Now I have to re-install my apps, re-sync my accounts and setup the phone the way I want it. It will take a little more time.
But I'm glad that I pulled this through - with your help of course! Guys, you rock!
I wish that I'll be as helpful as you at the near future.

Today's latest CM9/ICS kang is here
I'd also recommend getting a custom kernel.
For batt life, morfic's SEUV kernel.
For reg performance, perhaps Matrix's kernel
MAKE SURE THAT YOU HAVE CLOCKWORKMOD PERMANENTLY INSTALLED BEFORE DOING THIS. It saves time if you mess up. Also, make sure you get the latest gapps HERE
Instructions:
1. Go to clockwork recovery
2. Select data/factory reset/wipe
3. Select clear cache as well
4. Adv Mounts and Storage > wipe /system (note, this wipes android off the phone. It's a good idea since youre going from ver 2.x to 4.x)
5. Choose "flash from zip" (or whatever it's called.....NOT flash from update.zip)
6. Flash the cm9 update file first, then flash the kernel of your choice, then flash the gapps file.
7. Back out of the menu and select reboot.
Take note though, that the new ICS OS has incompatibilities with certain apps while GPU rendering is turned on, etc. It'll prob reboot on you sometimes, etc. For the most part it's stable, but that's completely subjective.
If you do run ICS, make sure you turn on GPU rendering in Dev Options. It takes full advantage of the GPU for UI animations, etc. Sometimes there's a stray app here and there that doesnt play nice, and you'll notice if the window looks really tiny or funny. Turning it off will fix the problem.

nickmv said:
Today's latest CM9/ICS kang is here
I'd also recommend getting a custom kernel.
For batt life, morfic's SEUV kernel.
For reg performance, perhaps Matrix's kernel
Click to expand...
Click to collapse
Two questions:
The link you give me to download the ICS rom keeps loading for ever. So, I choosed this one instead:
http://forum.xda-developers.com/showthread.php?t=1356228
Right or wrong thing to do?
It it essential to install a custom kernel? I ask because I forgot to copy/paste the .zip file and due to lack of time, I procceded without it, installing the ROM and G-APPS.

[Q] Rooting, unlocking & updating madness

Having been a member on this forum for years I must admit it has been incredible the wealth of information I've gained from it. I've had all sorts of phones/pdas and I'ved used this site to help me get the most out of it and to help m "tame" the device and stop rubbish from the vendors being installed on there when I don't want it.
A couple of years ago I got an HTC Desire. Great phone although limited memory. I was happy with it. Didn't bother to root it or anything. I then got a Motorola Xoom. Didn't bother rooting that either. I got myself an HTC Sensation now. I decided one day that I was going to unlock/root the thing to see if I could do it.
Somehow, I think I managed it. I haven't really noticed a difference but then I haven't put a custom rom on it. On all my old Windows mobiles I always had a custom rom.
Now, going back to the Xoom. It's an original Xoom. I bought it in May 2011. It is running Android 3.2 after Motorola sent out an update. All is good.
However, I would like to have ICS on it. This is where my problems begin. I've tried following so many different how-to's on how to do this unyet none so far have worked. So, either I'm completely stupid or, the guides are not easy to follow or the process (that is always touted as easy) is not very easy.
So I am asking for help. Here is what I understand are the steps that I need to acheive.
1. I need to unlock the device
2. I need to install a recovery image
3. I need to install ICS
Questions: I *think* I have done 1. How do I check? After what I believe is a convoluted process, I have installed the Android SDK. I have the drivers for the device on the [Windows 7 64bit] PC and I can see it listed when I type adb devices.
Why do I need to unlock the device? What does the act of unlocking it do? When I followed this:
http://forum.xda-developers.com/showthread.php?t=1242241
I got to step 3. I typed in the first command:
adb reboot bootloader
After much faffing around I found out from another site I needed USB Debugging enabled. Nobody told me this. No, it isn't obvious that I need this.
The boot screen appeared and gave a message at the top and then I typed in:
fastboot oem unlock
I followed the instructions on the screen. I unlocked the device. It took a while. When it rebooted I found I had to set the device back up again as if it was the first time I'd used it. "Great!" I am thinking, I've lost everything. Thankfully I backed up what I wanted so I am not bothered. Slowly the apps appeared to come back after it synched with Google. I'm assuming stuff gets backed up somewhere.
I typed:
fastboot reboot
It rebooted.I typed:
adb reboot bootloader
It rebooted into the bootloader. Now here is where things started to go off track. I typed the next command:
fastboot flash recovery recovery-Tiamat-R4c-100611-1150-cwm.img
I get this:
unknown partition 'recovery-Tiamat-R4c-100611-1150-cwm.img'
error: cannot determine image filename for 'recovery-Tiamat-R4c-100611-1150-cwm.img'
So what now?
I cannot believe the process to unlock and flash a rom is so unbelievably convoluted. I've read dozens of walkthroughs, how-to's and forums and each one seems to be very similar unyet there is always something different on there to what I get on my screen or something doesn't happen quite the same way.
Here is what I am trying to acheive:
I have Android 3.2 on my Xoom and I would like it to be ICS.
We'll assume that I am completely stupid and need serious handholding to get to ICS. Is there anyone that can help with these seemingly simple steps?
One thing I keep reading is about the recovery image file. Is this related to Cyanogenmod? I am assuming as it is called a recovery image file it helps you get back when things go wrong.
Thanks and much love to the person that takes up the reigns and helps me out here.

Hi!
If you are rooted already that's pretty easy. But if not, try using LordAIOTool to root (yea it's mine and I think it's worth a try). After you are rooted flash a new recovery - download from development section - after, rename the recovery to recovery.img and then use the following commands on adb, fastboot and this recovery folder (simultaneously)
adb reboot bootloader
fastboot flash recovery recovery.img
fastboot reboot
Then after keep clicking the vol- after 2s of your tablet appears on Motorola logo. Then keep cycling until appears Android Recovery then press vol+
You are on recovery now, just select install zip from sdcard...
Good luck
Sent from my MZ601 using XDA Premium HD app

If you wanted your xoom rom'd, then you could try wesamothman's guide: http://forum.xda-developers.com/showthread.php?t=1717402 It is great for beginners and the experienced alike.
This is for the wifi only xoom MZ604. There is another guide by him i believe for the MZ602

Do I need to flash a new rom to get root on my MZ604? What is the easiest way to just root the stock 4.0.4 firmware? I have no desire for a different rom. I just want to root it.

Hey there.
If you don't want to flash a custom ROM and only want to root it, try this:
1) unlock your bootloader.
2) thru ADB, flash a recovery image.
3) thru Recovery, flash superuser flashable zip: http://www.4shared.com/zip/g3yzbrIa/...?cau2=403tNull

I ran the first couple of steps to unlocking. That is as far as I have got. As I said, I have tried so many of these walkthroughs and not one of them has all the steps. They all make an assumption somewhere along the line.
For example: xxlordxx replied with:
"If you are rooted already that's pretty easy".
I'm not, that is the problem.
Again:
1. adb reboot bootloader
2. fastboot flash recovery recovery.img <---- This didn't work and gave me the error I pointed out earlier and that is where it all stopped. Noone explains what to do when it goes wrong.
Anything passed this stage is irrelevant until I can sort out the problem above.
yosterwp, you mentioned wesamothmans guide. I will try that one as it looks a bit more "dummies guide-like" and it is for my exact device which is the MZ604 wifi only. I hadn't seen this one as it was only posted a couple of days ago
Just so I know, can someone anser these questions? I'm sure they're very simple but I don't know.
1. Do I need to unlock the Xoom to put ICS or a custom rom on it?
2. Is unlocking the same as setting s-off?
3. If not, what is the difference?
4. I assume the recovery img file is for recovering if things go wrong. Is that correct? Why isn't a recovery app on there for when OTA releases get pushed through? What else does the recovery do for me?
5. What is Cyanogenmod and do I need it or is this another custom rom?
6. There are so many custom roms out there. Everyone says to choose the one that is suited to me but I don't know which ones are suited to me. Does anyone know of a list of the custom ones that are around and why I'd choose one above the other? (I am assuming this is a long shot
Thanks for everything so far. I will let you know how I get on with wesamothmans guide.

Hi Snert.
Answering your queries:
1. Do I need to unlock the Xoom to put ICS or a custom rom on it?
yes.
2. Is unlocking the same as setting s-off?
I don't really understand what you mean by s-off... but unlocking is this: you unlock the bootloader that is considered as a security checkpoint of your device. It is locked by default. when it is unlocked, you can then install recovery image passing thru this checkpoint (allowed). without bootloader being unlocked, no rooting can be done. this is the very first step.
3. If not, what is the difference?
same as above
4. I assume the recovery img file is for recovering if things go wrong. Is that correct? Why isn't a recovery app on there for when OTA releases get pushed through? What else does the recovery do for me?
Recovery explanation details is here: http://www.androidcentral.com/what-recovery-android-z
5. What is Cyanogenmod and do I need it or is this another custom rom?
It is a different ROM based Firmware...
6. There are so many custom roms out there. Everyone says to choose the one that is suited to me but I don't know which ones are suited to me. Does anyone know of a list of the custom ones that are around and why I'd choose one above the other? (I am assuming this is a long shot
Go for the best custom ROM for your MZ604. It is from Team EOS.
Hope I answered your questions

wesamothman said:
Hi Snert.
Answering your queries:
1. Do I need to unlock the Xoom to put ICS or a custom rom on it?
yes.
2. Is unlocking the same as setting s-off?
I don't really understand what you mean by s-off... but unlocking is this: you unlock the bootloader that is considered as a security checkpoint of your device. It is locked by default. when it is unlocked, you can then install recovery image passing thru this checkpoint (allowed). without bootloader being unlocked, no rooting can be done. this is the very first step.
3. If not, what is the difference?
same as above
4. I assume the recovery img file is for recovering if things go wrong. Is that correct? Why isn't a recovery app on there for when OTA releases get pushed through? What else does the recovery do for me?
Recovery explanation details is here: http://www.androidcentral.com/what-recovery-android-z
5. What is Cyanogenmod and do I need it or is this another custom rom?
It is a different ROM based Firmware...
6. There are so many custom roms out there. Everyone says to choose the one that is suited to me but I don't know which ones are suited to me. Does anyone know of a list of the custom ones that are around and why I'd choose one above the other? (I am assuming this is a long shot
Go for the best custom ROM for your MZ604. It is from Team EOS.
Hope I answered your questions
Click to expand...
Click to collapse
You did
Much love!

[Q] Rooting, Flashing, Upgrade services needed!

I've searched & found 'How to....' threads on here but TBH I'm not a techy and most of it doesn't make sense to me.
I did try to upgrade from 4.0.4 to 4.1 this week and almost succeeded until some 'signature not recognised' message appeared. So I'm going to attempt another way (if possible/allowed) and ask if there's anybody out there who'd be willing to root (whatever that means), flash (ditto) and upgrade to 4.1 for me in return for payment.
I really hope this isn't against forum rules - it's a genuine, last-ditch attempt.
I live in the West Mids but travel a big chunk of the country each week so could possibly deliver the thing.
Here's hoping for an avalanche of replies.....

Can anyone tell me why I get the 'signature not verified' message please?
I've downloaded the upgrade from an October thread on this forum.

Which xoom do you have (wifi, 3g/4g, international, family)? Are you rooted yet?

dfib1 said:
Which xoom do you have (wifi, 3g/4g, international, family)? Are you rooted yet?
Click to expand...
Click to collapse
Thanks for replying!!
It's the wi-fi model. As for 'is it rooted?' - I would say not. One, because it's hardly been used and two, because I have no idea what 'rooted' means.

junctiontwo said:
Thanks for replying!!
It's the wi-fi model. As for 'is it rooted?' - I would say not. One, because it's hardly been used and two, because I have no idea what 'rooted' means.
Click to expand...
Click to collapse
Sorry I took so long to answer.
As for being rooted if you are the only one to have own the xoom and don't know what it means then you are most likely not rooted. Root is like getting administrator rights in windows. It gives you the ability to customize your device, install custom roms and also completely screw up your device .
You should be able to go to settings-about tablet--update (or system update) and it will check for your update and ask you to start the download and install. If this does not happen then you can flash back to Honeycomb (which I can walk you through this will also wipe all your data or maybe for a fresh start) and let your device automatically update to ICS (4.04) and the JB (4.1).
I can also walk you through rooting and installing a custom JB rom like you asked for free.

dfib1 said:
Sorry I took so long to answer.
As for being rooted if you are the only one to have own the xoom and don't know what it means then you are most likely not rooted. Root is like getting administrator rights in windows. It gives you the ability to customize your device, install custom roms and also completely screw up your device .
You should be able to go to settings-about tablet--update (or system update) and it will check for your update and ask you to start the download and install. If this does not happen then you can flash back to Honeycomb (which I can walk you through this will also wipe all your data or maybe for a fresh start) and let your device automatically update to ICS (4.04) and the JB (4.1).
I can also walk you through rooting and installing a custom JB rom like you asked for free.
Click to expand...
Click to collapse
Please don't apologise - you're the only one to answer!
I've tried the system update and have been told that there are none. (In my ignorance I actually thought it would update to 4.1.2 automatically!).
Your offer to walk me through the rooting & upgrade is extremely generous and I accept without hesitation.
If it's flashed back to HC, will it default back to ICS or move to JB?
A huge 'Thanks'.
James
PS. Having tried numerous times very recently to upgrade there's no data to erase so that's not an issue....

I am going to give you the steps to unlock your xoom, install a recovery, root, install CWM Rogue Touch recovery (better than the one you used to root) and then install stock JB.
Now that we are talking root I am going to ask a moderator to moved this thread to the root section.
Here is how I rooted my xoom.
follow the directions here but instead of doing step 1 follow this for adb install http://www.support-4-you.com/main/i...ged-adb-installation&catid=40:how-tos&Itemid= it is a 1 click adb install then follow from step 2 on.
When you are done there you can install CWM Rogue Touch screen recovery
Download CWM Rogue Touch zip and put on the root of your external sd card. ( if you don't have a sd card we will do it another way just let me know)
Boot into recovery by turning your xoom off.
1. press power
2. when the moto dual core logo comes on wait 3 seconds and press volume down
3. recovery should be displayed across the top press volume up.
You can skip steps 1- 3 now that you are rooted if you download Quick Boot open it, select recovery and the grant Super user permission
4. go to install zip from sd card (just like when you rooted) and find the CWM Rogue Touch Zip and install
5. reboot your xoom
6. you now have CWM Rogue Touch installed.
To install JB on your xoom you do need an sd card for this part
DownloadJB stock for wifi xoom and copy to your sd-card
Here is the thread discussing this [JB]Stock Android 4.1.1 JRO03H, Root, via CWM Recovery (US Wi-Fi MZ604) and also there steps for installing it but I will post them for you here.
boot into recovery
select backup and let it backup your current system (a Parachute)
then select wipe factory/data ( I Can't remember excactly what it says because I use a different one)
then select install zip from sd card
locate the JB rom you copy to your sd-card and install.
reboot system (it will take some time the first time)
sign in to android with your gmail account.
You are on JB
Good luck and don't worry if something goes wrong we can get you out of 99.99% of any issues that arise.

dfib1 = I cannot thank you enough.....
The frustrating thing is I'm about to leave the house and am working away until the weekend so can't try it until then! I'll let you know the outcome.
Have a great day :good:

If you need help with his excellent guide just post here or hit with a pm
Sent from my Xoom using xda app-developers app

Ok, a quick mid-procedure question....
(I'm doing something fundamentally wrong because I can't quite finish the upgrade).
Do I install the folders onto the Xoom from the SD in a zipped or un-zipped state? I've tried both but no luck so far in completing the task.
I've rooted successfully as my PC recognizes the device. I believe I've installed CWM ok - is there a way to confirm this?
On the final 4.1 install I get the 'installation aborted' message as 'signature not verified'. One thing I may be doing wrong is installing the wrong files? On selecting the JRO03H folder I'm then given file choices and I'm clicking on what I think are the most obvious. I can post a list of the choices if it helps?
Sorry to be such a newbie pain - I realize that these questions are irritating to those 'in the know'!

did you reboot after fastbooting the recovery? the recovery says clockwork at the top. It should also be touch screen controlled
When you move the zip over leave it as a zip on you xoom and when you flash the recovery will unzip it for you.

what step are you up to?

Sorry for the late update. I've tried the whole procedure several times from the very beginning, even removing previously installed Rogue & JB software, but STILL get the same error messages as previously described. I've re-booted at the right time according to the instructions but this still makes no difference, and have checked the 'USB de-bugging' option.
I did make a couple of basic errors in the Command function to begin with but realised these & corrected them. My device serial no. appeared so I assume I rooted successfully? I'm able to change Developer settings which I couldn't before. I even installed the USB drivers independently via the Motorola website.
I have a free day today so am going to make a bucket of coffee, make myself comfortable and start again.
One quick point - I'm in the UK and assume you two helpful guys are in the US? Looking at numerous sites it seems our respective Xoom models have different procedures which is maybe why this isn't working?
Thank you again for your seemingly endless patience.......

i believe you are getting these issues because you might still be running the stock recovery.
lets just backup and start fresh.
You followed the instructions mentioned before and I assume you have adb and fastboot installed.
Connect your xoom and make sure usb debugging is on.
open up a command line and type adb reboot bootloader
I'm going to assume because of the previous steps you unlocked the bootloader if not type in the command line fastboot oem unlock
You can download the recovery from here http://bit.ly/iLRAIV
If unlocked at the bootloader type fastboot flash recovery recovery-Tiamat-R4c-100611-1150-cwm.img Note:make sure the img file is in the same folder where your fasboot.exe is in the sdk
after it has been flashed reboot device by hold volume up and power.
Move the JB stock rom into your sd card. you can download the rom from here http://www.mediafire.com/?qhbhlbvu859bv0f
after the device restarts type adb reboot recovery
in recovery Wipe everything except the sd card. Then flash the above jb rom. In theory everything should work. If you keep getting the error get back to us because Im going to give up and guide you through the install of the Team EOS Jellybean 4.1 rom that I know works without issues. PM if you want to have my direct contact info for gtalk so we can discuss further for any issues.

OK I've just tried another 8 times to root the thing, c-a-r-e-f-u-l-l-y following the instructions step-by-step.
1. I don't have the 'from SD card' option, instead have 'from USB drive'. I have a 16Gb flash drive connected via an adaptor for the Xoom which doesn't appear to prevent anything as it reads the contents of the card just fine, unless you can tell me otherwise?
2. In Recovery I get these options:
* reboot system now
* apply update from USB drive
* wipe data/factory reset
* wipe cache partition
3. Even when trying the very first install (Rogue), I get:
--Install /sdcard ...
Finding update package...
Opening update package...
Verifying update package...
E: signature verification failed
Installation aborted
I love a challenge and always get a buzz when I manage to do something that is foreign to me i.e computers. On this occasion however I'm fast getting to the stage where I think it'd be easier to leave things at 4.0.4.
My reason for wanting the upgrade in the first place is because I'm comparing this tablet to my work-supplied Galaxy Tab 2 running 4.1.1. Realistically I don't think the two will ever be comparable and I'm probably foolish to think this could be the case. It only remains to say that I am so very grateful to both of you for taking so much time & effort in talking me though the procedures.
I consider myself pretty 'switched on' but this has me foxed!
Cheers guys - have a great weekend. Hope the snow doesn't cause you problems!

here are the outline of the steps
1. unlock your xoom
2. fastboot a recovery to install custom recovery on your xoom
3. reboot into new recovery
4. flash universal root zip to root your phone
5. reboot phone that is now rooted.
6. reboot phone into custom recovery again
7. flash jb update
I think you have missed step 1 or 2.
When you type fastboot oem unlock what does it say?

Hmmm, I MAY be one step closer?
After typing' fastboot oem unlock' the tablet has gone into 'Starting Fastboot protocol support' but appears to be stuck. Do I wait until it's done it's thing?
OR would it be a whole lot easier for all concerned if we tried your other suggestion dfib and flashed back to HC and then to JB?

What if you type adb devices? Does a bunch of numbers show up or does it say waiting for device?

Hold the front page!!!!!!!
I just watched a video on how to unlock and it's worked. You were quite correct - I had missed your point 1 above and probably point 2. I'm moving onto the next bit now....

Great let us know what happens. I will be around for a while.

Full on Noob, need help if possible.

Okay so, I love my Infuse but getting really tired of not being able to download anything off the play store. Just tired of it's rather less than great performance right now as well. It's is running 2.3.6 GB and want to get this thing up to ICS if possible. Just something running 4.0 so I can use my phone for what I need too. It is not rooted, no cyanogenMod, NOTHING. As the title says, I'm a full on noob here and I apologize if all this is covered in other threads, however I have just gotten to the point where I have found myself even more lost than where I started on what I needed to do/get. If someone can, I will literally need this spelled out to me (no pun intended), in order of the steps I need to take with everything. I'm getting tired of confusing myself even more from all the different stuff I have seen all over the place and I know without some serious guidance, I will just brick my phone. Thanks for any help! :laugh:

I understand this community can be a bit unorganized and confusing so I'll give you my process for rooting and installing custom firmware (there are other ways, but this works for my AT&T Infuse 4G SGH-i997).
First of all, no one uses ICS on the Infuse. There is a ROM, but it's underdeveloped because JB came out so quick. You will need to flash it to get to higher operating systems, but it is by no means a daily driver. Even JB is a little buggy compared to KitKat on the Infuse these days.
The first thing you want to do is root your phone and get a custom recovery.
There are more than a few options for rooting, but I prefer using ODIN (as I understand it, this is the tool Samsung uses to restore soft bricked phones). So this is a good thing to know how to do, in case you ever do soft brick your phone, you'll know exactly what to do.
Read the ODIN instructions in full as I will only briefly explain.
You're going to have to install Samsung drivers.
You'll be using UCLB3_Unbrick_root_1.1.zip. If you used UCLB3_Unbrick_1.1.zip it would just get you back to stock GB with no root added.
To put your phone into download mode, first turn off your phone. Plug a usb cable into your computer. Then with the phone off, hold down both volume buttons and plug the usb cable into your phone. A warning will come up and you push volume up to accept, realizing that you can easily soft brick your phone if you loose power or unplug during a download.
Once downloading is done, the phone will reboot and you'll be disappointed to see that nothing has changed. Except one small thing, you are now rooted and you should have an application called SuperUser that will allow you to do nifty and also dangerous things.
Now follow this step in the ODIN instructions to add the custom recovery (CWM = Clock Work Mod):
The version with root works exactly like the above version, but adds root. To add CWM recovery to the rooted version, download a custom Gingerbread kernel from HERE or HERE and flash the zImage using SGS Kernel Flasher (found in the Play Store) on the phone. If you go this route for root and CWM, your Custom Binary Download counter will not show any custom binary activity.
Click to expand...
Click to collapse
If you follow the link in the second "HERE," you'll get the kernel I prefer since it was most recently updated. Scroll down the downloads section and grab "2013.04.30-CWM-Synthesis-1.2Ghz.zip." (1.2Ghz is stock for our processor, anything higher will be overclocked which I don't recommend).
Extract that and grab the zImage file in the update folder. You're going to copy this to your phone in a second.
But first you need SGS Kernal Flasher, you can get it off the playstore, but I despise having to log in to an OS I'm going to write over in less than a minute so I download the APK from here. Hopefully you know how to install APKs from your SD card and that you'll have to check install from unknown sources.
Now flash the zImage using SGS Kernel Flasher. Your phone will reboot and hang on the Samsung logo and a creepy voice is going to tell you about how she's partitioning your phone and installing Voodoo lag fix. This is normal. Eventually your phone will reboot back into GB and you'll be ready to flash any ROM of your choice by rebooting into recovery.
You reboot into recovery by holding the volume up and volume down button while powering on the phone. This is different than download mode and will take you do a new screen that you control with the volume keys.
You'll be using this to put new software on your phone.
Now you can bassically follow the instructions for getting to CyanogenMod 11 (Kit Kat) from GB.
The first bullet is what I just explained in detail.
Note that I didn't include the links in these instructions, just follow the link above to get to the original post.
Obtain CWM, this can be done using Jscotts Odin back to stock (Follow instructions and use SGS kernal flasher to obtain CWM)
Run Qksters IMEI backup script here
Make certain you are on ICS, this can be done by flashing Entropy's CM9
It is recommended now that you remove your SD Card
CWM: Wipe Cache / Factory Reset
Install ROM: Scroll down for downloads sectoion
... The package will start to install..
... Phone will reboot into the install screen again...
... Continue to install [Automatically] If not manually flash again
... Phone will reboot again and be at the recovery screen...
Install Gapps: Here - Working swipe!
CWM: Wipe Cache Partition
CWM: Advanced/Wipe Dalvik Cache
Reboot
Click to expand...
Click to collapse
To be clear, when you flash a ROM, it won't be like flashing the zImage (that was just to get custom recovery). To flash the CM9 ROM or Qksters IMEI backup script for example, you leave the rom in the .zip file and simply put it on your SD card. Once in the recovery screen, you select "Install Update from ZIP" and navigate to the particular ROM you wish to install.
Also after updating to a higher version of Android, your phone will sometimes hang on the install screen for a long time. If it does for more than five minutes, it's safe to pull the battery and try flashing again (and sometimes necessary).
After flashing Entropy's CM9, you will be on ICS, you can use if you want but I don't advise it. You should continue with the instructions and update to KitKat after getting to ICS. I recommend Scott's CM11 (what I linked you to) or Scott's BeanStalk (find it in the Android Development Section).
Lately I've been using CyanFox and I have to say, it's the most stable ROM I've used in a while.
If you have any questions about this, feel free to ask.
Best of luck and happy flashing,
~bokonon9

Thank you muchness!
Thank you very much for helping me in this mess! I greatly appreciate it. I love my Infuse and do not want to get rid of it quite yet so hopefully this will help! Once I get a new usb cord I will get on this. My toddler decided to get a hold of it and it has to set a certain way now and can't be moved. This, is no bueno! Anyways, THANKS AGAIN!!! :laugh:

Goodluck! :laugh: :good:

I'm new in the android world and I'm using a nexus 7 and an infuse to make experiments just to learn.
bokonon9, thank you! You're guide has been precious to me.
Unfortunately I only succeeded installing ICS, infact I get till here:
After flashing Entropy's CM9, you will be on ICS, you can use if you want but I don't advise it. You should continue with the instructions and update to KitKat after getting to ICS. I recommend Scott's CM11 (what I linked you to) or Scott's BeanStalk (find it in the Android Development Section).
Click to expand...
Click to collapse
I tried to install CM11 and even CM10 at least half a dozen times each, following step by step the instructions that I've found on the thread but all the times I have the same issue:
after the zip rom update and the reboot, the bootloader keeps launching the CWM recovery. I see the logo, the progress bar and then I land in recovery
I don't get any kind of error (and I don't know where to look for to get more information than what's shown on the screen) and I'm just stuck in the recovery and I have to start from scratch every time using Odin all the way down.
I'm not interested in Gapps so, at the beginning I tried without installing them but then I tried also using the appropriate gapps as indicated in the procedure. Either way I didn't get any solution to my problem.
Do you have an idea? Is there a way for me to provide more information or debug?
Thank you!

wwr said:
I'm new in the android world and I'm using a nexus 7 and an infuse to make experiments just to learn.
bokonon9, thank you! You're guide has been precious to me.
Unfortunately I only succeeded installing ICS, infact I get till here:
I tried to install CM11 and even CM10 at least half a dozen times each, following step by step the instructions that I've found on the thread but all the times I have the same issue:
after the zip rom update and the reboot, the bootloader keeps launching the CWM recovery. I see the logo, the progress bar and then I land in recovery
I don't get any kind of error (and I don't know where to look for to get more information than what's shown on the screen) and I'm just stuck in the recovery and I have to start from scratch every time using Odin all the way down.
I'm not interested in Gapps so, at the beginning I tried without installing them but then I tried also using the appropriate gapps as indicated in the procedure. Either way I didn't get any solution to my problem.
Do you have an idea? Is there a way for me to provide more information or debug?
Thank you!
Click to expand...
Click to collapse
i would say go back to stock gb with odin and basically start over but with ics i always let it reboot to get a "feel" for it then i reboot to recovery and wipe basically everything then flash the next level of android which should be cm 10 then i let that boot then repeat that to get to kitkat 4.4.3 CarbonRom....sometimes you have to flash the same rom twice to get it to flash tho

I already tried all that and I can't figure out a way out ... I'm really banging my head against the wall

wwr said:
I already tried all that and I can't figure out a way out ... I'm really banging my head against the wall
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2091900&page=370
read the last post on that page by scmfxt

[GUIDE] [clark] How to root Pure/Style on Marshmallow or correct a bad root attempt

It seems no matter how much this topic gets discussed, people still use old methods and they either fail, or they break something like WiFi, Mobile Data, infinite bootloop, or getting stuck on the boot logo... THIS DOESN'T HAVE TO HAPPEN and it IS repairable, usually without reflashing the entire image. The problem comes from using an old method, outdated SuperSU, or incorrect method. This guide will help you correct most issues, or help you to flash root correctly the FIRST time.
I have written rooting guides for multiple Moto device, and I have owned many Moto devices as well, so I have some idea what I am saying and I have tested these methods extensively, they work.
------------------------
This guide covers ALL Moto X 2015 models that can be bootloader unlocked and have TWRP available, it doesn't matter if it is the XT1575 or XT1572, the method is identical (untested on Chinese XT1570, but it should work). In fact, this method will work on all 2015 and 2016 series Moto phones running Marshmallow, including the Moto E, X, G3, G4, and Z with the appropriate TWRP image.
Please read completely and make sure you understand each step and how to do it, if you don't get something search the thread or ask an open question, no offense, but do not PM me with a question because you think it is too stupid to ask in public (we all started as noobs), or because you want me to hold your hand and do it for you, I will politely tell you no and ask you to post in the thread.
If you are coming here because you followed an old guide where you used a special boot.img file and now you have no service (WiFi and/or mobile data) and you don't have a TWRP backup to restore first, well, the RIGHT way to fix it is to reflash the current stock firmware image and start over... why? Because the various "help" people give to have you flash the radio files that match the kernel (ie. boot image) that was patched for the old style root method, has now put you in a mismatched firmware environment and could potentially brick on the next OTA. If you are in this situation and don't know for to properly fix it... go to the FAQ section in post #3 below (WIP-incomplete).
If came are coming here to root the first time, or you just thought you could flash SuperSU and reboot and now stuck in either a bootloop or stuck on the boot logo... Your in luck, read on, because we can fix that in a jiffy!
tl;dr version for advanced users: Skip to "How to do it" section to root, or "Do the prep" section to fix a bad root.
I am writing this tutorial because there are still lots of failed root attempts using older "standard" methods that do not work on this device. I also do not like the "one click" root methods, because they can and do fail (KingoRoot will brick a Moto X P/S, regardless of what it's web page says), and when they do people have no idea how to fix it. The manual way is not difficult, and it teaches you how to work on, fix, and use your device on a level above that of the average smartphone user.
I will only cover the details of rooting, the prerequisites are covered elsewhere in detail and I will link to reliable sources for the information. Specifics of the prerequisites are outside of the scope of this tutorial, but are open for discussion in this thread.
Prerequisites:
1) Device must have an unlocked bootloader. See Moto - Unlocking the Bootloader for more info.
NOTE: Performing this prerequisite will give you all the tools (fastboot) and drivers needed to continue, and wipe your device, meaning erase all your information and programs. Make sure to backup any important data first. This step will also permanently void your warranty once an unlock code has been issued by Moto, it doesn't matter if you even use it, your warranty is done.
2) You need to have TWRP installed or one-time booted via fastboot. CWM and other recoveries will NOT work at this time. See the official TWRP pages for clark here. I will NOT teach you how to use TWRP in this thread, if you are going to root you need to understand that your self, but if you get in a real bind I may knudge you in the right direction. I will tell you that there are two modes, flashed or booted, the later is much better if you plan to take an OTA later as long as you don't do something stupid like flash Xposed.
3) You need a copy of the latest STABLE SuperSU ZIP from Chainfire's site on the internal storage or SD card of your device, you can always fine the latest stable version here: https://download.chainfire.eu/supersu/ As of this posting update UPDATE-SuperSU-v2.82-20170528234214.zip (version 2.82) is the current stable version and it has been tested and verified to work.
NOTE: Unless otherwise stated, do not use a beta version for rooting Moto devices. SuperSU versions with even numbers are stable versions, while odd numbered versions are beta editions.
4) Reboot and start TWRP recovery, the method you use to do this doesn't matter (boot or flash).
5) Backup your device with TWRP to your SD card, even if you just unlocked and the phone is as blank as a printed page from a 1988 HP DeskJet printer with it's original cartridges still installed, backup... You will always have a good point to return to if the worst happens.
Do the prep:
Note that the hidden Do the prep section is ONLY for repairing a bad flash, SuperSU has been updated and as of version 2.79 the hidden section should no longer be needed for general purpose root on a working device, you just flash SuperSU. If you flashed an older version and are bootlooped, perform this section and continue.
Now, the procedure is the same whether you are trying to root the first time, or you did it the old way just flashing SuperSU and are now not able to boot...
In TWRP, when you have your backups and are ready to root, first go to Advanced and open the Terminal, in the terminal type this EXACTLY as shown:
Code:
echo SYSTEMLESS=true>>/data/.supersu
Now press ENTER (there is no confirmation returned). You can verify this worked correctly by entering 'cat /data/.supersu' in the terminal and see if it returns "SYSTEMLESS=true", if not, you did it wrong, try the echo command again. Now press exit/back and press the HOME key.
After you have successfully entered the command in the TWRP Terminal you may continue
How to do it:
Go to Install and select the SuperSU zip file you downloaded from Prerequisite #3 and swipe to flash it and reboot. No need to clear caches or anything else but you are welcome to if you wish. You can install SuperSU updates normally through the app going forward (as of this posting).
Why do I have to do this???
Again, this is somewhat dated information and only applies to fixing a bootlooping device when improperly rooted.
For whatever reason, the install script for SuperSU does not recognize that this device (like many others) requires a systemless root installation. By creating /data/.supersu in the TWRP recovery environment, the SuperSU install script parses the file and sees "SYSTEMLESS=true" and ignores what it auto-detects and forces a systemless root installation.
Hope this is helpful to someone!
As always, if this is the first time you have booted TWRP or attempted root... BACKUP IN TWRP FIRST!!! Once the system is modified, it cannot be undone (easily) and you will always have a known good starting place if the worst happens.
DISCLAIMER: I am not responsible for anything that happens... Your device, your responsibility, no matter what happens... Although all the information here has been tested and is known to work with no issues except where noted, things occasionally can and do go wrong and we cannot foresee every possible scenario or circumstance.
If you need assistance, we need detailed information about what what's going on and what you have tried to do... Please provide details including:
1) Device model number and Android version
2) TWRP version
3) SuperSU version
4) Output of 'cat /data/.supersu' from TWRP terminal
And a copy of recovery.log if possible, and any other pertinent information you can think of. Without specific information there is nothing that I can do to assist you and request for help may be ignored.
EDIT: Photos added showing what a proper command and flash should look like. Note that in picture 1 the exit command is not needed, you can just back out. In pictures 2 and 3 a proper flash of SuperSU is shown, note that system-less mode is specified and the boot image is patched, this is what should occur. It is normal for it to loop once or twice, but that is it, first boot could take 10 minutes plus.
NOTE: I no longer own this device, but will help where I can and will keep this thread open to assist users where ever possible, but I no longer have a device to test/verify things with.

Alternate Method #1
Some users have noted that the above method doesn't seem to work, we don't know why as it seems inconsistent but we can't pin it down specifically to user error, certain model number or build, or anything else, as it works 98% of the time...
But if the above method fails, the alternative is to download and copy to SD card or internal storage SuperSU 2.62-3 ßeta version available here and flash it through TWRP like normal.

Reserved - FAQ (oops, guess I already did that)

I'm so glad I found this thread! I've been procrastenating fixing my phone because of all the crappy methods. This one very easy to follow!
But still can't manage to get my WiFi working
I don't get it. But somehow my nandroid backup failed too, because it's only some 2.X MB big and I don't seem to recover anything....
So I guess I'll have to keep trying..
FYI:
1) Moto X Style 6.0
2) TWRP 3.0.2-0
3) Tried both 2.78 and 2.62. Currently running 2.62
4) SYSTEMLESS=true

Jorinde123 said:
I'm so glad I found this thread! I've been procrastenating fixing my phone because of all the crappy methods. This one very easy to follow!
But still can't manage to get my WiFi working
I don't get it. But somehow my nandroid backup failed too, because it's only some 2.X MB big and I don't seem to recover anything....
So I guess I'll have to keep trying..
FYI:
1) Moto X Style 6.0
2) TWRP 3.0.2-0
3) Tried both 2.78 and 2.62. Currently running 2.62
4) SYSTEMLESS=true
Click to expand...
Click to collapse
Find the latest rom image for the version you have installed, and flash the radios with fastboot.

acejavelin said:
Find the latest rom image for the version you have installed, and flash the radios with fastboot.
Click to expand...
Click to collapse
Thanks for your quick reply. Tried that, didn't work.. The ROM i'm currently running is MPH24.49-18 btw... I'm now trying it the hard way, just reverting everything step by step. But the first step (flashing gpt.bin) is already giving me the preflash error. This is going to be a lot harder than I thought and it's been too long since I've been flashing these things.
Used to flash my Moto Milestone and my Sony X10, can you imagine.

Jorinde123 said:
Thanks for your quick reply. Tried that, didn't work.. The ROM i'm currently running is MPH24.49-18 btw... I'm now trying it the hard way, just reverting everything step by step. But the first step (flashing gpt.bin) is already giving me the preflash error. This is going to be a lot harder than I thought and it's been too long since I've been flashing these things.
Used to flash my Moto Milestone and my Sony X10, can you imagine.
Click to expand...
Click to collapse
Because you are not on 49-18, if you were on the latest OTA for 6.0 you were on 49-18-4. Pre-flash validation failure confirms your using the wrong version. Look in my sig for the return to stock thread, there are links to current roms and discussion of the 'preflash validation error'.

Wasn't systemless method only intended for not altering the system partition in such way not to break compatibility with Android Pay and such apps that don't allow root?
Maybe I got it wrong when I first saw the appearance on the scene of systemless root. From what you are saying the auto detect it's supposed to detect with which method the device is compatible (not only detects if system was already modified? let's say like by TWRP).
I wasn't able to flash SuperSu newest stable versions either, all ended up stuck at boot, except for the 2.62 version (updatable later through playstore and binaries thorugh app via normal update). Honestly I haven't tried systemless as for me I through it was a waste (as said I through it wasn't meant for other purpose).
ATM I'm using CM's own root, but I will report as soon as I will try SU again. I never had problems with modem/wifi with SU, only that it didn't boot on newer stable builds.

Got the Moto X Pure a few days ago. It came with 6.0. This procedure works. Thank you!

ban.codrut said:
Wasn't systemless method only intended for not altering the system partition in such way not to break compatibility with Android Pay and such apps that don't allow root?
Maybe I got it wrong when I first saw the appearance on the scene of systemless root. From what you are saying the auto detect it's supposed to detect with which method the device is compatible (not only detects if system was already modified? let's say like by TWRP).
I wasn't able to flash SuperSu newest stable versions either, all ended up stuck at boot, except for the 2.62 version (updatable later through playstore and binaries thorugh app via normal update). Honestly I haven't tried systemless as for me I through it was a waste (as said I through it wasn't meant for other purpose).
ATM I'm using CM's own root, but I will report as soon as I will try SU again. I never had problems with modem/wifi with SU, only that it didn't boot on newer stable builds.
Click to expand...
Click to collapse
No, although that was one thing we thought we would gain (which we didn't), Systemless root is to get around Marshmallow security. Root is detected by SafetyNet API, and it detects pretty much any system modification, systemless or not

Currently Using TWRP 3.0.2.0 . Just unlocked bootloader and haven't done anything else . Recovery flash went well during the initial process of unlocking . Now Im trying to make a backup of the stock Rom , everytime I try to make one I keep getting failed at the end of the process ? Is this a known bug ? I have been doing google searches for the past hour and still unable to find anything to indicate anyone else is having this problem . Unless I didn't use the correct terms while searching . Any help would be appreciated

SouthernEvo said:
Currently Using TWRP 3.0.2.0 . Just unlocked bootloader and haven't done anything else . Recovery flash went well during the initial process of unlocking . Now Im trying to make a backup of the stock Rom , everytime I try to make one I keep getting failed at the end of the process ? Is this a known bug ? I have been doing google searches for the past hour and still unable to find anything to indicate anyone else is having this problem . Unless I didn't use the correct terms while searching . Any help would be appreciated
Click to expand...
Click to collapse
It is not a known issue... Where are you storing the backup, internal storage or SD card?

acejavelin said:
It is not a known issue... Where are you storing the backup, internal storage or SD card?
Click to expand...
Click to collapse
Was backing up to the SD Card . Been messing with it and now its working for some weird reason . I appreciate your quick response though

I used windroid to unlock the bootloader and install twrp( don't reboot system but rather boot into recovery to make twrp stick) , from there I just flashed supersu and I was good to go. Many methods out there but this worked for me.

Thank you so much for this guide. I have to say, as a new Motorola user coming from Samsung phones exclusively, this whole process made me feel like a real noob again.
I made the switch from iOS to Android back when the Galaxy S2 came out because I grew tired of the jailbreak cat and mouse games on the iPhones and iPads. Learning to root and flash ROMs on all my subsequent Samsung devices was fairly simple and very enjoyable. This Moto X Pure though was a real tasker for me. I honestly never knew about the extra steps you had to take to unlock, twrp and root this phone. I really wish manufactures would help us make this much easier.
Anyway, thank you again for your help. I'll be seeing y'all around the forums as a new MXPE user!

acejavelin said:
No, although that was one thing we thought we would gain (which we didn't), Systemless root is to get around Marshmallow security. Root is detected by SafetyNet API, and it detects pretty much any system modification, systemless or not
Click to expand...
Click to collapse
Thank you for clarifying a misconception I had on systemless root
(I intentioned to reply to you earlier, but the mad busy week made me forget about my intent )
I'm going to try right now the latest stable with systemless method (rather than flashing the older version) on a full wiped clean stock to see if it works. (Even tho I see lots of feedbacks here inspiring me to believe it would)

In what order?
acejavelin said:
It seems no matter how much this topic gets discussed, people still use old methods and they either fail, or they break something like WiFi, Mobile Data, infinite bootloop, or getting stuck on the boot logo... THIS DOESN'T HAVE TO HAPPEN and it IS repairable, usually without reflashing the entire image. The problem comes from using an old method, outdated SuperSU, or incorrect method. This guide will help you correct most issues, or help you to flash root correctly the FIRST time.
I have written rooting guides for multiple Moto device, and I have owned many Moto devices as well, so I have some idea what I am saying and I have tested these methods extensively, they work.
------------------------
This guide covers ALL Moto X 2015 models that can be bootloader unlocked and have TWRP available, it doesn't matter if it is the XT1575 or XT1572, the method is identical (untested on Chinese XT1570, but it should work). In fact, this method will work on all 2015 and 2016 series Moto phones running Marshmallow, including the Moto E, X, G3, G4, and Z with the appropriate TWRP image.
Please read completely and make sure you understand each step and how to do it, if you don't get something search the thread or ask an open question, no offense, but do not PM me with a question because you think it is too stupid to ask in public (we all started as noobs), or because you want me to hold your hand and do it for you, I will politely tell you no and ask you to post in the thread.
If you are coming here because you followed an old guide where you used a special boot.img file and now you have no service (WiFi and/or mobile data) and you don't have a TWRP backup to restore first, well, the RIGHT way to fix it is to reflash the current stock firmware image and start over... why? Because the various "help" people give to have you flash the radio files that match the kernel (ie. boot image) that was patched for the old style root method, has now put you in a mismatched firmware environment and could potentially brick on the next OTA. If you are in this situation and don't know for to properly fix it... go to the FAQ section in post #3 below (WIP-incomplete).
If came are coming here to root the first time, or you just thought you could flash SuperSU and reboot and now stuck in either a bootloop or stuck on the boot logo... Your in luck, read on, because we can fix that in a jiffy!
tl;dr version for advanced users: Skip to "How to do it" section
I am writing this tutorial because there are still lots of failed root attempts using older "standard" methods that do not work on this device. I also do not like the "one click" root methods, because they can and do fail (KingoRoot will brick a Moto X P/S, regardless of what it's web page says), and when they do people have no idea how to fix it. The manual way is not difficult, and it teaches you how to work on, fix, and use your device on a level above that of the average smartphone user.
I will only cover the details of rooting, the prerequisites are covered elsewhere in detail and I will link to reliable sources for the information. Specifics of the prerequisites are outside of the scope of this tutorial, but are open for discussion in this thread.
Prerequisites:
1) Device must have an unlocked bootloader. See Moto - Unlocking the Bootloader for more info.
NOTE: Performing this prerequisite will give you all the tools (fastboot) and drivers needed to continue, and wipe your device, meaning erase all your information and programs. Make sure to backup any important data first. This step will also permanently void your warranty once an unlock code has been issued by Moto, it doesn't matter if you even use it, your warranty is done.
2) You need to have TWRP installed or one-time booted via fastboot. CWM and other recoveries will NOT work at this time. See the official TWRP pages for clark here. I will NOT teach you how to use TWRP in this thread, if you are going to root you need to understand that your self, but if you get in a real bind I may knudge you in the right direction. I will tell you that there are two modes, flashed or booted, the later is much better if you plan to take an OTA later as long as you don't do something stupid like flash Xposed.
3) You need a copy of the latest STABLE SuperSU ZIP from Chainfire's site on the internal storage or SD card of your device, you can always fine the latest stable version here: https://download.chainfire.eu/supersu/ As of this posting SR4-SuperSU-v2.78-SR4-20161115184928.zip is the current stable version and it has been tested and verified to work.
NOTE: Unless otherwise stated, do not use a beta version for rooting Moto devices. SuperSU versions with even numbers are stable versions, while odd numbered versions are beta editions.
4) Reboot and start TWRP recovery, the method you use to do this doesn't matter (boot or flash).
5) Backup your device with TWRP to your SD card, even if you just unlocked and the phone is as blank as a printed page from a 1988 HP DeskJet printer with it's original cartridges still installed, backup... You will always have a good point to return to if the worst happens.
How to do it:
Now, the procedure is the same whether you are trying to root the first time, or you did it the old way just flashing SuperSU and are now not able to boot...
In TWRP, go to Advanced and open the Terminal, in the terminal type this EXACTLY as shown:
Code:
echo SYSTEMLESS=true>>/data/.supersu
Now press enter (there is no confirmation returned), then exit and press the Home key. You can verify this worked correctly by entering 'cat /data/.supersu' and see if it returns "SYSTEMLESS=true", if not, you did it wrong, try the echo command again.
Go to Install and select the SuperSU zip file you downloaded from Prerequisite #3 and swipe to flash it and reboot. No need to clear caches or anything else but you are welcome to if you wish. You can install SuperSU updates normally through the app going forward (as of this posting).
Why do I have to do this???
For whatever reason, the install script for SuperSU does not recognize that this device (like many others) requires a systemless root installation. By creating /data/.supersu in the TWRP recovery environment, the SuperSU install script parses the file and sees "SYSTEMLESS=true" and ignores what it auto-detects and forces a systemless root installation.
Hope this is helpful to someone!
As always, if this is the first time you have booted TWRP or attempted root... BACKUP IN TWRP FIRST!!! Once the system is modified, it cannot be undone (easily) and you will always have a known good starting place if the worst happens.
DISCLAIMER: I am not responsible for anything that happens... Your device, your responsibility, no matter what happens... Although all the information here has been tested and is known to work with no issues except where noted, things occasionally can and do go wrong and we cannot foresee every possible scenario or circumstance.
If you need assistance, we need detailed information about what what's going on and what you have tried to do... Please provide details including:
1) Device model number and Android version
2) TWRP version
3) SuperSU version
4) Output of 'cat /data/.supersu' from TWRP terminal
And a copy of recovery.log if possible, and any other pertinent information you can think of. Without specific information there is nothing that I can do to assist you and request for help may be ignored.
EDIT: Photos added showing what a proper command and flash should look like. Note that in picture 1 the exit command is not needed, you can just back out. In pictures 2 and 3 a proper flash of SuperSU is shown, note that system-less mode is specified and the boot image is patched, this is what should occur. It is normal for it to loop once or twice, but that is it, first boot could take 10 minutes plus.
Click to expand...
Click to collapse
I really appreciate the help, but I have one question. Do I flash SuperSu and then type the command into the terminal, or do I type the terminal command first?
Thanks again for your help,
Matt

Iglooian said:
I really appreciate the help, but I have one question. Do I flash SuperSu and then type the command into the terminal, or do I type the terminal command first?
Thanks again for your help,
Matt
Click to expand...
Click to collapse
First, a little etiquette lesson, please don't quote long posts (especially the first post) for no reason, at the very least edit it down to only show the relevant parts so people don't have to scroll through a long meaningless quote.
And to answer your question, you enter the terminal command first, then install SuperSU, that is how it is ordered in the first post instructions. If you read the entire first post, it explains what the command does, and logic therefore lets you know it must be done first.

acejavelin said:
First, a little etiquette lesson, please don't quote long posts (especially the first post) for no reason, at the very least edit it down to only show the relevant parts so people don't have to scroll through a long meaningless quote.
And to answer your question, you enter the terminal command first, then install SuperSU, that is how it is ordered in the first post instructions. If you read the entire first post, it explains what the command does, and logic therefore lets you know it must be done first.
Click to expand...
Click to collapse
Actually, it was unclear what order I was supposed to do it in; we call that a clarifying question, but thanks anyway.

Iglooian said:
Actually, it was unclear what order I was supposed to do it in; we call that a clarifying question, but thanks anyway.
Click to expand...
Click to collapse
Fair enough... I will edit the "How to do it" section to make it more clear.