Hey guys,
i bought a Tablet PC from China last Monday.
The seller sold it to me for 78$ with free shipping.
Here the specs:
Processor:iMAPX210,1.00GHZ
LCD Display:7.2" TFT (800*400)
Touch Panel:Capacitive
RamDR2 256MB
Rom(storage):2GB
External memory:2G TF Card up to 32G
Battery:1400mAH
USB port:2 * mini usb (HOST)board, U-disk, 3G dongle etc.
HDMI :19pin MINI HDMI port, 720p out
Earphones:2.5mm stereo phone jack
WIFI:802.11 b/g
G sensor:3 directions
Motor:Built in AC/DC jack:INPUT:100-240VAC OUTPUT:5.0V===2A Video formate surpport:avi, mov,mp4, asf,wmv,wma, rm,rmvb, 3GP, m4a, mpg, flv, mp3
Audio formate surpport:mp3,wav, wma, aac, ac3, AAC+, RealAudio
I was looking many times on google and found a similar Tablet PC...
It's from Airis , Model - One Pad 700. But it's the One Pad 700 is with resistive touch.
So now my questions....
Are there some other people with this tablet and is there any (custom) ROM i could use? Or is there a ROM that can be changed to this Tablet ( like the one of Superpad or FlyPad....)?
I hope to hear something from you!
Best regards,
Niko
7" infoTMIC powered tablets
Welcome and it sounds like you got a deal. The 7" infoTMIC powered tablets have some potential an can leverage a lot of the effort done for the 10" tablet but be warned burning the incorrect update file will brick the tablet.
As of yet a custom ROM does not exist. The manufacture/supplier provided STOCK updates are described in the infoTMIC Hardware ID's "hwver" and updates (*.ius) thread. Can you identify the Hardware ID "hwver" of your tablet and post the information?
Specific to the Airis , Model - One Pad 700 this ONEP AIRIS 700 forum, translated from Spanish, has several ongoing discussions and a recently released 2.2 update. Similar 7" infoTMIC powered tablets the Sylvania SYNET7LP Work-In-Progress thread discusses some of the progress with that device and the [Q] Disgo Tablet 6000 thread has more discussions.
The Linux Kernel Source Code for 7" infoTMIC Sylvania tablet was released and an effort to compile some modifications is underway.
A Custom Sylvania ROM development Work In Progress thread has successfully created a utility to modify the update file structure. Now work has begun to create a custom images.
Please join in any or all of the discussions for further information.
InfoTM china Tablet
Hi any one. Sorry for my Enghis
I Have one china tablet 7'' white Android 2.3.3
CPU ARM V6 combatibltite
2 USB
1 HDMA
1 CAMERA
378 mb RAM
2 gb inside memmory
---
In the box write : Android 2.3.3
CPU IMAPX 210
512 MB RAM
4 GB MEM
---
ok : (
Now. I have 5 firmware from infotmic
1 firmware android 2.3.3 for my tablet when have blue led
1 firmware adroid 2.3.3. for my tablet when have red led
1 firmware adroid 2.3.3 for same tablet white diferend cpu (Cortex 10)
1 firmware android 2.3.3 for same tablet white 8.9''
1 firmware android 4.0 for same tamblet but differend cpu (Cortex A10)
I want ask developers if i can burn firmware adroid 4.0 for Cortex in my tablet. (same 7'')
All tablet when have all this firmware its same (2 usb, hdmi, 512mb ram 4gb mem) but differend size 7'' 8,9'' or 10''
I write after, new message and i give from my dropbox link for all firmware and code for infotmic android 2.3.3
Hi!
Is there any update about roms?
Does any(usable) rom for x210?
Thank you for your advise.
vakis said:
Hi any one. Sorry for my Enghis
I Have one china tablet 7'' white Android 2.3.3
CPU ARM V6 combatibltite
2 USB
1 HDMA
1 CAMERA
378 mb RAM
2 gb inside memmory
---
In the box write : Android 2.3.3
CPU IMAPX 210
512 MB RAM
4 GB MEM
---
ok : (
Now. I have 5 firmware from infotmic
1 firmware android 2.3.3 for my tablet when have blue led
1 firmware adroid 2.3.3. for my tablet when have red led
1 firmware adroid 2.3.3 for same tablet white diferend cpu (Cortex 10)
1 firmware android 2.3.3 for same tablet white 8.9''
1 firmware android 4.0 for same tamblet but differend cpu (Cortex A10)
I want ask developers if i can burn firmware adroid 4.0 for Cortex in my tablet. (same 7'')
All tablet when have all this firmware its same (2 usb, hdmi, 512mb ram 4gb mem) but differend size 7'' 8,9'' or 10''
I write after, new message and i give from my dropbox link for all firmware and code for infotmic android 2.3.3
Click to expand...
Click to collapse
infotmic roms
doboz said:
Hi!
Is there any update about roms?
Does any(usable) rom for x210?
Thank you for your advise.
Click to expand...
Click to collapse
I dont have responce from developers....
in the http://www.overmax.pl/pl/pomoc_techniczna/59,tablety/-
have too much roms for imapx210 cpu
Related
Hi everyone ! Sorry form my EN
I have one infotm (infotimic) 7'' tablet with WiFi, camera, 2 usb, 1 hdmi. with out bluetooth, GPS, magnetic sensor and more
Android info apk write for ARM v6 compatiblete 375Mb ram 2Gb mem. 800X480 android 2.3.3
Model OV-BT-02 overmax
I find more roms from site overmax when have tou mach same tablet whit diferend cpu.
I have problem if i update in android 4 rom from same tablet white diferend cpu ? (A10)
Any can download many differends roms and source code (for android 2.3.3) from
http :// overmax .pl
Hi everyone ! Sorry form my EN
I have one infotm (infotimic) 7'' tablet with WiFi, camera, 2 usb, 1 hdmi. with out bluetooth, GPS, magnetic sensor and more
Android info apk write for ARM v6 compatiblete 375Mb ram 2Gb mem. 800X480 android 2.3.3
Model OV-BT-02 overmax (infotimic M799rb)
I find more roms from site overmax when have tou mach same tablet whit diferend cpu.
I have problem if i update in android 4 rom from same tablet white diferend cpu ? (A10)
Any can download many differends roms and source code (for android 2.3.3) from
http :// overmax .pl
i have also one of this devices, but i think i have a brick. i tried to flash a wrong firmware, now i can boot only into the bootloader to use the IUW Tools but it won't burn the file to the internal storage any suggestions to fix it?
thanks in advance
mik
P.S. on the overmax website is a new rom wich helps me to fix my broken device
Hi everyone ! Sorry form my EN
I have one infotm (infotimic) 7'' tablet with WiFi, camera, 2 usb, 1 hdmi. with out bluetooth, GPS, magnetic sensor and more
Android info apk write for ARM v6 compatiblete 375Mb ram 2Gb mem. 800X480 android 2.3.3
Model OV-BT-02 overmax (infotimic M799rb)
I find more roms from site overmax when have tou mach same tablet whit diferend cpu.
I have problem if i update in android 4 rom from same tablet white diferend cpu ? (A10)
Any can download many differends roms and source code (for android 2.3.3) from
http :// overmax .pl
Hello freinds,
I am new to this forum as well new in the Android technology.
Recently I bought HCL ME U1 tablet whose specifications are
Operating System : Android 4.0.3 (Ice Cream Sandwich)
Processor : 1GHz Cortex A8
Display : 7Inch 800 x 480 WVGA
Camera : Front 0.3MP
Storage : 4GB Internal Flash Storage
Memory : 1GB DDR3 RAM
HD Playback : Full HD 1080p
Connectivity : 3G Enabled through USB Data Card (WCDMA/EVDO) Wi-Fi 802.11 b/g/n
I/O Ports : mini USB
APP Store : ME App Store
Battery : 4000mAh Li-Polymer
Now just tell me:
1. How can I root my device?. - Can I root using SRSRoot One Click Root for Android
2. Where can I find Clock Work Recovery for my Tablet HCL ME U1.
3. How to take a backup of the stock rom before updating or installing any thing new in the tablet ( before installing CWM)
4. Will CWM delete my basic build while installing it.
5. Any thing else which I need to do apart from this.
6. Inform useful applications.
Please help me . I am asking all these questions as my tablet is new which has 1gb ddr3 ram as compared to previous hcl me u1 which has 512 mb ddr3 ram.
Thank You my friends.
Hi all,
I have search of various thread on custom rom for android 4.2.2 & I am not asking anyone to build a custom ROM for this tablet but I just want to ask some recommendations.
I have a Korea Tablet (not Samsung) but MPGIO QM101 which I got online from the website www.mpgio.com
QM101 tablet is similar to SANEI / AMPE tablet
the specs for my tablet is
A7 Quad core31
DDR3 2G with built in 16G ROM..
[email protected] which is a 8CORE CPU
Type: Tablet PC
Screen Size: 10"
Processor Manufacture: AllWinner
Processor Type: Coretex A7
Touch Screen Type: Capacitive Screen
Display resolution: 1280x800
Battery Life: 7000mH
Feature: Wifi,Webcams,Multi Touch,HDMI,G Sensor,Camera
Operating System: Android 4.1.1
Brand Name: MPGIO
Model Number: QM101
I have previously upgraded from 4.1.1 to 4.2.2 official rom from their websites but I just need Bluetooth dongle to work through.
anyone can recommend any custom rom which can put the Bluetooth dongle to work on this tablet?
current system : Android 4.2.2
Kernel is 3.3 (not 3.2)
SDK 3.2
Website to ROM build : http://www.mpgio.com/solution/?c=5/34&p=2&uid=252
Thank you
n_w_asg
Thank you
anyone??