I have Xoom which was rooted on 3.1. yesterday, I decided to upgrade it version 3.2 by following the instructions on this site.
This is how I did it:
First of all I flashed it ClockworkMod Recovery (Recovery Zip (solarnz-R4c-100611-1150)
Then performed update with Recovery Zip (solarnz-R4c-100611-1150).
It got upgraded to version 3.2 and everything seems to be working fine except for SD card. It was enabled in my previous root upgrade 3.1 but now it does not work. If I go in recovery mode, I still see files on SD card but not in Xoom any more. I will appreciate any help to resolve the issue.
I just upgraded mine this morning to 3.2 and the SD card works. shows up as External1
Skila15 said:
I just upgraded mine this morning to 3.2 and the SD card works. shows up as External1
Click to expand...
Click to collapse
Did you use the same files, I used?
Related
I have a US WiFi xoom, rooted, running tiamat 1.4.1.
I've formatted the card in a computer and an android device (Evo). No matter what I do, the SD card will not show up on the device in android. It shows up fine in clockwork. I've restarted my xoom as well after inserting the card.
Can someone lay it out for me, because I'm obviously missing something, and I've tried all the answers in the other threads, such as "format it".
I'm having the same problem. Did you get it fixed?
Ok first I'm assuming you have a file manager app (I suggest Astro or Root explorer, file station is a good one too) You should be able to see the files on your memory card located in sdcard and a folder called "external." If you have files on the card but they aren't showing up in the "external" folder a reset will usually make them show up. I hope this makes it a bit more clear.
I've tryed that and I'm not seening that file external anywhere.
In all honesty, you are probably not doing anything wrong. Some sd cards just don't work for some reason. I have a crappy 1 gig card that worked as soon as I restarted my device, and have a 8 gig card that will not work while honeycomb is running, no matter what I do . Same deal though, it will show up in CWM recovery. Maybe the idiosyncrasies that arise from different sd cards is what's holding official updates from including sd support?
So what card seems to work? I've tryed two the one out of my evo and the 16g that I just got.
How did you flash to 1.4.1? Did you come from stock or previous versions. Did you use ADB or Kernal Manger? If it was from stock then you might try flashing the 1.4.0 kernal first and then going back to 1.4.1. I actually liked 1.4.0 better because of some of the memory mounting features that it had.
hipespipes said:
I've tryed that and I'm not seening that file external anywhere.
Click to expand...
Click to collapse
Do you see a /sdcard/external folder? Do you see a /sdcard/sdcard2 folder?
Try creating both of these and rebooting your Xoom. Which version of Tiamat did you come from?
Sd Formatter and a reboot solved my issues with a 32g Kingston.
jwb
I upgraded to 3.1 and put on the TDR WiFi kernel but I still don't see my SD Card. I can see it in the Recovery module, but not within HoneyComb. Any ideas?
I'm using a SanDisk 32Gb, no issues.
No SDCard for me outside of CW
I went from Tiamat 1.1.6 installed via adb to Tiamat 1.4.2 installed via CW and I cannot see the external SDCard on my 3G Xoom.
Steps I took:
1) Started at Honeycomb 3.0.1 with Tiamat 1.1.6
2) Installed CW 3.0.2.8 via adb
3) Flashed Honeycomb 3.1 via CW per instructions (SDCard is seen in CW)
a. Flashed New Recovery
b. Flashed HC 3.1
c. Flashed Bootloader Patch
d. Flashed Updated Boot.img (for 3G Xoom)
e. Performed Wipe Data/Factory Reset
f. Performed reboot and verified successful install of HC 3.1
4) Flashed Tiamat 1.4.2 per instructions via CW (SDCard is seen in CW)
a. Flashed 3G Boot image with light off
b. Flashed 1.4.2 1600 Kernel
c. Rebooted and verified new Kernel. Used SetCPU to clock at 1,600 Mhz
I still can't see the SDCard as either /mnt/sdcard/external or /mnt/sdcard2 using Root Explorer, Astro or EStrongs. I reformated the card using XP SP2. I then tried to format via my Droid and finally SD Formatter. I reboot between each format. Nothing works. My SD Card is a Sandisk 16GB. I have tried having USB Debug On and Off...no difference. I reflashed the 3G light off Boot image followed by reflashing Tiamat 1.4.2 with no result.
Could the problem be that I went directly from 1.1.6 to 1.4.2 without any interim update? It is weird to me that CW sees the card but HC 3.1 won't.
Thank you for your help.
Update: I also tried to use the Sandisk 32GB from my OG Droid which I know is a good card. CW sees it on the Xoom; but HC 3.1 doesn't.
Ok got a little bit of a suprise tonight after I finaly took the plunge and rooted and then updated my uk xoom to 3.1, the SD card is now working? (in some way)
If a card is present during boot then it apears mounted to the external folder, I can also access this via usb, only thing I cant do is change a card on the fly?
Am I right? has this 3.1 update got the sd card working (at least in some way)?
No... you might still be root somewhere. I try it twice with my 8gb sdcard and my 32gb sdcard
No, Tried it in my US Wifi Xoom that just got the update and no luck. Mine is stock, barring the OTA update.
This is a function of bigrushdog's 3.1 which is not OTA. Stock sdcard has not been implemented.
MAD Industries said:
This is a function of bigrushdog's 3.1 which is not OTA. Stock sdcard has not been implemented.
Click to expand...
Click to collapse
Ah thanks that explains it then even more glad I've done this now
And for your second question, no it is not hot swappable yet, you must reboot to see the card.
I've flashed the HC 3.1 using CWM
I've flashed the Wifi_RootTool_3.1.zip
But somehow can't find the sdcard - slashmntslashsdcard still points to the internal memory.
Xoom Setting - Storage setting still only shows "Internal storage"
My setup is : android version 3.1
Kernel version 2.6.36.3-gc2bee64 android build atapa23
Build number HMJ37
Xoom model : Wifi
anybody can help ?
HJ
hjfritz said:
I've flashed the HC 3.1 using CWM
I've flashed the Wifi_RootTool_3.1.zip
But somehow can't find the sdcard - slashmntslashsdcard still points to the internal memory.
Xoom Setting - Storage setting still only shows "Internal storage"
My setup is : android version 3.1
Kernel version 2.6.36.3-gc2bee64 android build atapa23
Build number HMJ37
Xoom model : Wifi
anybody can help ?
HJ
Click to expand...
Click to collapse
Rooting and/or updating to 3.1 does NOT get you a working SD card.
You will have to install a kernel (Tiamat 1.4.4) + a new boot image.
To avoid serious issues I suggest you thoroughly READ the instructions for installing the Kernel and the boot image.
Double check to ensure you are using the right kernel/boot image for your xoom (3g or not, etc). Flashing the wrong thing in the wrong place can brick your xoom.
Note that an .img file is NOT the same as a .zip file. Check your work before you press [Enter].
Good Luck.
Terry
Also once you do have the right files, the /sdcard will still be the internal memory. You will find the external memory card in /sdcard/external.
Thanks bwcorvus, the only thing I missed was were to look for the external sd card!
tbayne said:
Rooting and/or updating to 3.1 does NOT get you a working SD card.
You will have to install a kernel (Tiamat 1.4.4) + a new boot image.
Terry
Click to expand...
Click to collapse
Ok I loaded a new boot image and loaded the Tiamat 1.4.4 following the Tiamat instructions
My kernel is now 2.6.36.4 Tiamat_Xoom-v1.4.4-Full_Throttle
However still no joy to access the SD Card. /sdcard/external remains empty when i open it with rootexplorer. It should have the Tiamat kernal zip and wifi_light_ON_Speed.zip on it because these are the files i put onto the sd card and flashed it with CMW.
Any idea what i did wrong ?
hj
After you flash the kernal, you have to restart xoom again for it to read sd card at startup. T least when I did it I had to restart the device one more time.
ok it looks like a SD Card Problem compatibility problem.
I'm using a imation 32 GB card (i-Express 2 microSDHC) class 10
I tried a SD card 8GB from my HTC HD2 and it works.
Strange that I can do the kernal and boot image flash from the card but not read it later. The SD Card also works on my HD2
Live is a mystery
HJ
hjfritz said:
ok it looks like a SD Card Problem compatibility problem.
I'm using a imation 32 GB card (i-Express 2 microSDHC) class 10
I tried a SD card 8GB from my HTC HD2 and it works.
Strange that I can do the kernal and boot image flash from the card but not read it later. The SD Card also works on my HD2
Live is a mystery
HJ
Click to expand...
Click to collapse
Try formatting the card in your hd2.
Sent From My Evo
update on my issue.
I found another thread with someone having a similar problem he used
Panasonic SD Formatter to reformat the SD Card. It resolved his
problem and indeed my problem. After reformatting it with the SD Formater 3.0
the memory card was finally recognised.
I did a erase and rewrite - takes an hour but was worth it.
I can now report that Imation 32GB SD card Class 10 is working on a Xoom with HC 3.1 and Kernal Tiamat 1.4.4
thanks to everyone
HJ
hjfritz said:
update on my issue.
I found another thread with someone having a similar problem he used
Panasonic SD Formatter to reformat the SD Card. It resolved his
problem and indeed my problem. After reformatting it with the SD Formater 3.0
the memory card was finally recognised.
I did a erase and rewrite - takes an hour but was worth it.
I can now report that Imation 32GB SD card Class 10 is working on a Xoom with HC 3.1 and Kernal Tiamat 1.4.4
thanks to everyone
HJ
Click to expand...
Click to collapse
Maybe you could edit the title of your thread to say (RESOLVED) so others with that problem can see your solution.
hjfritz said:
update on my issue.
I found another thread with someone having a similar problem he used
Panasonic SD Formatter to reformat the SD Card. It resolved his
problem and indeed my problem. After reformatting it with the SD Formater 3.0
the memory card was finally recognised.
I did a erase and rewrite - takes an hour but was worth it.
I can now report that Imation 32GB SD card Class 10 is working on a Xoom with HC 3.1 and Kernal Tiamat 1.4.4
thanks to everyone
HJ
Click to expand...
Click to collapse
I have just installed NTFS mounting from hellcat82, and SD mounting just work!
Ok guys so I wasn't sure where to post this so here it goes.
I've recently rooted my xoom (3.1) because I was just sick of not being able to use the usb hosting or the sd card. So I went a head and rooted, everything went just fine. I can use flash drives through the micro usb port so that seems to be working smoothly. But I cannot for the life of me get sd card going.
I've read nearly all the threads out here about this but still no go. I've tried rebooting, and of course reformatting with sd formatter. I have created the sdcard/external folder and the sdcard2 (just in case). Any other suggestions??
I used the Tiamat 1.4.4 Full throttle version and like I said everything flashed smoothly. I just can't get to my sd files. PLEASE HELP!!! I've been at this for two days now and i can't seem to do anything with it!!
I'm still on 3.0.1, rooted and CWM installed (solarnz-R4c-100611-1150 through fastboot). I tried to install "3.2 for Non-US Xooms based on Manta Ray 2.0" but I'm stuck. Copied the .zip to /sdcard (internal) but this did not work. How can I enable my external sd card?
otothel said:
I'm still on 3.0.1, rooted and CWM installed (solarnz-R4c-100611-1150 through fastboot). I tried to install "3.2 for Non-US Xooms based on Manta Ray 2.0" but I'm stuck. Copied the .zip to /sdcard (internal) but this did not work. How can I enable my external sd card?
Click to expand...
Click to collapse
You can use this guide that offers update to 3.1, and then an update to 3.2 flashable through CWM. You have to take this intermediate step in order to get sdcard access. This is for the non-US Xoom.
http://forum.xda-developers.com/showthread.php?t=1094144