Related
Just joined to say thanks to Roebeet and everyone who is active in this forum. Because of the obvious potential of the gtablet being explored here, and discussed on phandroid.com I decided to take the plunge and purchased one tonight. I might have passed this tab by, and waited months for something else...
--and here's where I cry for help!
I carefully followed a series of step-by-step instructions I found thru google, to install the latest tnt lite found here on XDA. Everything seemed to work without a hitch, and was prouder than a pappa to have completed my first root and mod ,ever!
BUT right after I DL'ed and installed the flash 10.1 apk things went south. The browser constantly crashed to the home screen, and the market and email apps were crashing also. I rebooted and now I am greeted by the tnt setup screen that is covered in an endless wave of crash warning dialogs! I can't tap them away fast enough to see the desktop.
I've tried to do a recover, but I can't get thru the setup (that keeps crashing to the first screen also) to use the USB to mount the internal mem to my Mac.
I am insanely happy about the potential of this hardware, but I've painted myself into a corner. ANY help would be greatly appreciated.
And yes, I do look very handsome in my profile pic.
From bad to WORSE!
I discovered the dcom222 thread that describes my problem and details a solution. I followed it to the letter, changing the command and using my microSD as a secondary boot to reinstall the vanilla tnt ROM.
But then it just stuck on the tnt logo, faded in and out 3-4 times, and went dark! The device won't turn on or off (had a full charge when I pulled it from the wall socket a few moments ago)
Please tell me I haven't bricked this thing!
still no luck...
I was able to power the unit back up, but I've tried to recover and flash all three setup files I have (vanilla tnt, ota update tnt and tnt lite 2) but nothing works!
All of them create a loop of some sort, whether it's the viewsonic screen, gtablet screen loop, or the tnt logo screen blinking on and off, NOTHING boots to the desktop.
Going to bed before I drive my self insane. Hopefully someone in the know will reply by the time I check this at work.
thanks in advance
You have not bricked it, don't worry. This device is very hard to truly brick. If all else fails there is nvflash or the apx mode fallback. But I don't think you need that if you are still able to boot to clockwork recovery.
In clockwork go to advanced - mounts and try mounting and unmounting your partitions. I suspect your user partition may be screwed. This seems to happen fairly frequently especially the first time you flash a ROM. It happenend on my first flash and not again since. Clockwork lets you repartition though. Search the forum for partition fix, its not too big a deal.
If that fails try roebeet's thread on nvflash recovery for TNT lite. If that fails, search for APX mode.
As far as I know there are zero bricks from ROM flashing so far.
Sent from my SMB-A1002-3G using Tapatalk
Life in LA said:
Just joined to say thanks to Roebeet and everyone who is active in this forum. Because of the obvious potential of the gtablet being explored here, and discussed on phandroid.com I decided to take the plunge and purchased one tonight. I might have passed this tab by, and waited months for something else...
--and here's where I cry for help!
I carefully followed a series of step-by-step instructions I found thru google, to install the latest tnt lite found here on XDA. Everything seemed to work without a hitch, and was prouder than a pappa to have completed my first root and mod ,ever!
BUT right after I DL'ed and installed the flash 10.1 apk things went south. The browser constantly crashed to the home screen, and the market and email apps were crashing also. I rebooted and now I am greeted by the tnt setup screen that is covered in an endless wave of crash warning dialogs! I can't tap them away fast enough to see the desktop.
I've tried to do a recover, but I can't get thru the setup (that keeps crashing to the first screen also) to use the USB to mount the internal mem to my Mac.
I am insanely happy about the potential of this hardware, but I've painted myself into a corner. ANY help would be greatly appreciated.
And yes, I do look very handsome in my profile pic.
Click to expand...
Click to collapse
Scroll down to post number #869 http://forum.xda-developers.com/showthread.php?t=842004&page=87
feeling better
Thanks for the assurances that I didn't wreck the device, and pointing me to some solutions. I have a few questions:
what is clockwork mod? If I am able to recovery boot from my micro SD card, do I already have it? (I downloaded a bunch of recovery images to start, per instructions)
If it's something I still need to download, is it a PC application? How am I supposed to change settings in it (manage partitions, etc) if I can't get the tablet to boot?
-- stuck at work and dying to get home to fix this thing...
Ok, more detailed instructions:
If you press and hold down Volume + when you are pressing the Power button to boot up, and keep holding the Volume + key until you see a message that says "Detect a Recovery Key Pressed", that should get you to a text menu from which you can navigate using the volume +/- keys and the Home soft button to flash ZIP files and do other things. That menu is ClockworkMod Recovery. Since you remember installing a recovery.img, it sounds like you probably (hopefully) have ClockworkMod Recovery on there.
If you get to ClockwordMod Recovery, you can go down to the Mounts and Storage option, then you will find the "Mount USB storage" option at the end of that list. That lets you plug in and mount your internal memory area as a standard USB drive to your Windows or Mac computer to copy over new ZIP files and the like to your G Tablet.
You can also check that partitions are all mounting and unmounting successfully in that menu. If you go instead into the Advanced menu, you will see Partition SD Card, which I believe is what you might need to do at this point.
If booting with the Volume + button held down doesn't get you anywhere and you see nothing about Recovery Key Detected and don't see any text menu, then you don't seem to have a working recovery. At that point you'll have to do what phfaty suggested, read the post he referenced, and follow the link therein to the tegratab forum post to get the NVidia Tegra SDK installed on your Windows desktop and use the NVFlash tool and APK mode (where you hold the Volume - key down while booting instead of the Volume + key) to reflash your tablet.
still not working...
The good news:
I do have clockwork mod installed. Must have been in 1 of those zips or rars I ran in the very beginning.
The bad news:
it's still caught in a boot loop. I've mounted it as an external drive 3 times now from clockwork, and tried all 3 versions of the operating system (vanilla, vanilla with the ota and tntlite 2) and NOTHING makes a difference.
Life in LA said:
The good news:
I do have clockwork mod installed. Must have been in 1 of those zips or rars I ran in the very beginning.
The bad news:
it's still caught in a boot loop. I've mounted it as an external drive 3 times now from clockwork, and tried all 3 versions of the operating system (vanilla, vanilla with the ota and tntlite 2) and NOTHING makes a difference.
Click to expand...
Click to collapse
1)Boot into clockwork.
2)Navigate to Advanced menu
3)Choose partition sdcard
4)Choose data partition desired size(1024=1GB)
5)Choose 0GB for the next selection(swap not used)
6)Do a factory reset from main menu
7)Reboot
8)If that doesn't work, then reinstall ROM, then reboot
UPDATE
partitioning the drive and wiping the user data did the trick. I'm up and running again. thanks to all who chimed in to help.
powered up with PWR and (-) key and wont come out of it
Hold the power down for at least 5 seconds. You should see the screen go completely dark (better in a semi-dark room, as it's easier to see).
still stuck
tried your solution, nothing.
let it charge overnight to make sure I wasnt being a total scrub and the battery was dead....nothing
Any other suggestions would be greatly appreciated.
skip this, finally woke it up...on to next problem thanks all
When I first tried to flash to 1.1a, something like this happened. I don't think it was the ROM -- I think something malfunctioned inside the file system.
It was in the continuous Off/VS Birds/G-TabletLogo loop and even the power switch would not turn it off!
I wound up flashing CWM, and when I got into CWM I re-partitioned and re-formatted everything and then was able to successfully re-flash to TnT 2.2.0. (With the file system fixed, I am guessing I probably could have gone back to 1.01a if I have wanted to.)
Glad you are back working.
Rev
ARGHH!!
So has anyone found a definitive way to get these devices out of APX mode? I did a full restore on new device to clean up all the partitions and such, now nothing seems to get this thing to come out of APX. I suppose I could power it up with nvflash and leave it on the nvflashing screen until the battery dies, but there had to be a better way than burning the battery down overnight...
I have tried all sorts of combinations of powering on and off, is there a magic sequence lol...
my gtab wont boot up
my gtab wont go past the viewsonic and then gtab screne pleaseeeeeee some one help do i need to return it. i installed the tnt lite last night then this morning i couldnt sink mu gmail account then all of a sudden this....help
georgetirone said:
my gtab wont go past the viewsonic and then gtab screne pleaseeeeeee some one help do i need to return it. i installed the tnt lite last night then this morning i couldnt sink mu gmail account then all of a sudden this....help
Click to expand...
Click to collapse
Please don't hijack threads. There are LOTS of threads about boot loops. Check out some of the boot loop threads.
I was able to finally get the device unlocked and running much better. I used the nvflash recovery to get back to stock, then used Z4Root to get the device rooted stock. The rooting seems to have un-apx'd the device, and it works fine from there. So I would recommend keeping z4root on your drive so you can install it and root the device if it gets stuck in apx mode lol. It's a dirty hack but it worked for me when nothing else did.
Both of you,
I don't see that the thread was hijacked -- both of you are/were stuck in loops. Or at least something I think have a common cause.
What I was saying in my earlier post is that I am seriously wondering if the boot loops are caused by problems with the file system. Say, the system malfunctions or a flash makes something so it can't find the files it need to start.......
From my reading, it seems like most of the loops wind with the file system having to be fixed, or a new mod flashed over it, etc.
If we could determine that, perhaps we could know if loading CWM and fixing, or some such -- might save a tablet w/o having to re-flash.
Ideas or opinions?
Rev
butchconner said:
Both of you,
I don't see that the thread was hijacked -- both of you are/were stuck in loops. Or at least something I think have a common cause.
What I was saying in my earlier post is that I am seriously wondering if the boot loops are caused by problems with the file system. Say, the system malfunctions or a flash makes something so it can't find the files it need to start.......
From my reading, it seems like most of the loops wind with the file system having to be fixed, or a new mod flashed over it, etc.
If we could determine that, perhaps we could know if loading CWM and fixing, or some such -- might save a tablet w/o having to re-flash.
Ideas or opinions?
Rev
Click to expand...
Click to collapse
Hi,
Would a logcat (adb logcat) show anything?
Just a thought...
Jim
blue tooth stuck in apx
my bluetooth was stuck in apx. i unstuck it by installing a bluetooth switcher from the market.
Hop this helps someone.
roebeet said:
Hold the power down for at least 5 seconds. You should see the screen go completely dark (better in a semi-dark room, as it's easier to see).
Click to expand...
Click to collapse
what worked for me is holding down the same buttons to getting into apx mode.
both +/- volume buttons and then power until the screen turns off.
nickmaccombs said:
skip this, finally woke it up...on to next problem thanks all
Click to expand...
Click to collapse
May I ask how you got it started up? The only way I can get it to start is to NVFLASH. If I turn it off again, it'll be stuck in APX mode...
I stupidly installed TNT Lite 5.0 before reading the instructions. My gtab locked at white screen. I panicked. Did a full restore using Nvflash. That put g-tab to 2638. But when I shut off power I can get nothing but a black screen when powering on. The only way to get the tablet to function again is to flash another full restore, and then same problem occurs when I shut down. I cant update because the tablet screen goes black when attempting reboot. I've been reading posts here in the developers forum all day and I haven't come closer to solving my problem, so I need help from someone smarter please.
jesusgi said:
I stupidly installed TNT Lite 5.0 before reading the instructions. My gtab locked at white screen. I panicked. Did a full restore using Nvflash. That put g-tab to 2638. But when I shut off power I can get nothing but a black screen when powering on. The only way to get the tablet to function again is to flash another full restore, and then same problem occurs when I shut down. I cant update because the tablet screen goes black when attempting reboot. I've been reading posts here in the developers forum all day and I haven't come closer to solving my problem, so I need help from someone smarter please.
Click to expand...
Click to collapse
nvflash to the version included in the tntlite post there is an apk file link there
Do you mean 3588 stock?
jesusgi said:
Do you mean 3588 stock?
Click to expand...
Click to collapse
yes check the first post in the lite thread. It is linked as APK 3588
I downloaded it, but I am not sure how to use it with nvflash as compared to the restore which was relatively simple using the included bat file. Am I missing something or am I just a hopeless Noob?
jesusgi said:
I stupidly installed TNT Lite 5.0 before reading the instructions. My gtab locked at white screen. I panicked. Did a full restore using Nvflash. That put g-tab to 2638. But when I shut off power I can get nothing but a black screen when powering on. The only way to get the tablet to function again is to flash another full restore, and then same problem occurs when I shut down. I cant update because the tablet screen goes black when attempting reboot. I've been reading posts here in the developers forum all day and I haven't come closer to solving my problem, so I need help from someone smarter please.
Click to expand...
Click to collapse
Hmm?.. Seems there are a lot of users trying to prove the GTAB is in fact Brickable..*lol*
It is NOT!
Go here:
http://forum.xda-developers.com/showthread.php?t=861950
Yes I feel dumb about it. I did read that thread before posting. I did the restore. I can get the gtab to boot up and it is usable.......until I power down, then the only way to use it again is to reflash the restore again. I mean its usable. Not really bricked, really, but I am frustrated because it seems like I am missing the solution.
I used the nvflash from http://forum.xda-developers.com/showthread.php?t=861950 to prep my gtab for 5.0. Once it flashed and booted to the OS, I had it join wireless, then it prompted to start the update to 3588 immediately. Have you tried this?
Yes it downloads the update but to complete the update, it must reboot. When it goes to reboot then the screen goes black and then nothing The only way I can get it to work again is to nvflash it to the complete restore I have been going round in circles with it for hours and hours
jesusgi said:
Yes it downloads the update but to complete the update, it must reboot. When it goes to reboot then the screen goes black and then nothing The only way I can get it to work again is to nvflash it to the complete restore I have been going round in circles with it for hours and hours
Click to expand...
Click to collapse
Been there.......months later the tablet is still there. I can not power it off or reboot it. I bought another tablet and use "the unbootable" one at home where it sits in a dock until needed.
I have tried every nvflash recommendation out there...
There are about 4 or 5 tablets like this. Most have either been returned/swapped out or set aside and no longer used (from my reading of others with the same problem).
I can get it to boot by formatting partition 2 so if it ever goes off or I need to "update" it I turn it off.....connect it and nvflash it...holding volume + if I need to get to recovery. If not...once nvflash sends the bootloader over and formats partition 2, the device boots.
Something on mine is preventing the bootloader from booting.....the nvflash sending it over executes it and the tablet runs......
redundant - double posted
jesusgi said:
Yes it downloads the update but to complete the update, it must reboot. When it goes to reboot then the screen goes black and then nothing The only way I can get it to work again is to nvflash it to the complete restore I have been going round in circles with it for hours and hours
Click to expand...
Click to collapse
I got the same problem. I can only power my gtab by doing nvflash, and if i reboot, it only goes into apx mode.
Ouch. That has stopped me in my tracks. It's really bad news.
"Something on mine is preventing the bootloader from booting.....the nvflash sending it over executes it and the tablet runs......"
That's my problem exactly. My wife is going to be very upset. I thought I could keep her gtab updated without bricking it. Oh jeez that's exactly what I've done..........
Suggestion? don't do the update after you nvflash.. let the device boot up normally and put a different ROM zip file on the SD via USB.
Calkulins new ROM is based in TnT is super smooth.
http://forum.xda-developers.com/showthread.php?t=985705
From there try to reboot into recovery mode with an app like quick boot AniReboot and flash the different rom.
It may be the ROM you're trying to flash is corrupt.
I did the same too. . An didn't read the fine print. After getting the info
on how to fix my bricked gtab. Also, I had to do some Googling on apx
USB drivers for windows 7.
Long story short.. had a few pints. .. got it back to stock and installed tntl 5
The next day.. I'm using it now and I'm happy. Time for another pint.
I thought I bricked my GTab, after several hours of tweaking I was
able to flash it and run TnT Lite 5.0 now. Here is the procedure I did:
a. nvflash to stock rom. download the usb driver for windows 7 here and install (link from post by syntrix) : http://developer.download.nvidia.com/tegra/files/os/tegra_ventana_froyo_20110207.msi
b. grab the stock rom from the post by roebeet, choose "nvflash_windows_20100500.zip" and ""nvflash_gtablet_2010110500.zip": http://db.tt/Wm25t7U
c. following roebeet's instruction, put Gtab to APX mode (volume down + power on), run nvflash_gtablet.bat, should flash the rom fine.
d. boot the Gtab after flashing, should be able to run the original stock rom.
e. download the 3588 stock rom from this thread:http://forum.xda-developers.com/showthread.php?t=842000
f. run recovery (volume up + power on) to upgrade to 3588 rom, remember to make a "recovery" folder with "command" (check the prefix and see if is name "sdcard") and rename the downloaded 3588 rom to "update.zip". Put both to the root of the sdcard.
g. now you should have 3588 rom after the recovery
h. download tnt lite 5.0 rom and run a recovery. you will get stuck at a black screen. Just reboot and enter recovery mode again (volume up + power on). do a "wipe data" and reboot. Then you will be able to run TnT lite 5.0. In the recovery mode, the "power" button is "enter", not the "home" button in CWM 0.8. Anyway, just follow the instruction on screen for button layout.
Thanks. I have actually done those and would do them all but G-Tab will only boot once after flash (step d) after that if I power down, I gotta black screened brick until reflashing original ROM again. It is impossible for me to do step "F" from Gaspra post
and with that I give up. I ordered another G-Tab, and I'm using the old one as a plant stand. Who said this can't be bricked? I managed to do it.
Send it to me. I'll pay shipping.
jesusgi said:
Thanks. I have actually done those and would do them all but G-Tab will only boot once after flash (step d) after that if I power down, I gotta black screened brick until reflashing original ROM again. It is impossible for me to do step "F" from Gaspra post
Click to expand...
Click to collapse
did you try to erase the rom? try this before flashing to the stock rom:
http://forum.xda-developers.com/showthread.php?t=974422
Hey guys I was having some problems with my xoom's wifi on Tiamat's 1.4.4 so i decided to relock the device and use stock.
It's a US model and had build HMJ37 but i decided to follow this thread
http://www.xoomforums.com/forum/mot...4600-thinking-about-unrooting-read-first.html
I downloaded img build HRI66 and followed all the steps and it was ok. Then, i rebooted and now my device is at the motorola logo's dual core screen. Everytime i manually reboot with power and volume up it automatically reboots the device instead of shutting it down, it literally won't shut down and keeps hanging at the moto logo. It just keeps rebooting and getting stuck at the motorola logo. I then unlocked again, and performed the same process with the HRI39 img and still got the same problem
So im stuck. Please help me out guys, i'm in serious ****.
So you have gone as far as the "fastboot erase cache" and "fastboot oem lock" right? This is kind of funny because I tried to install Tiamat 1.1 ROM tonight and ended up going through this HUGE loop of problems.
Here's the problem I had: some time ago I installed ROMManager from the market. I thought it would be easier. It SHOULD be easier. I let it update my recovery to its own version 4.something. It allowed me to SORT OF install the ROM, but I wound up with some persistent system files that weren't getting wiped and a bcm4329.ko version mismatch.
This stumped me for a long time because all I could see was an "Error" message where I was supposed to be able to toggle the wifi on and off. I tried rolling back to my previous ROM. No go. And the culprit the whole time was ROMManager's CWM.
I tried rolling back my recovery.img file to the Tiamat version recommended in this forum. I kept getting all of these crazy "could not mount" errors for pretty much EVERYTHING. I thought my recovery partition was effed. So I rolled back to stock. Followed pretty much the same instructions you linked to.
From there I was able to boot into the stock OS. WiFi worked. I breathed deeply for a minute or two then dove right back in.
If I was in your position I would (and I did, though not from a boot loop) boot into fastboot and unlock the bootloader again. You can do it by holding the Vol down key as the device boots. When fastboot loads type "fastboot oem unlock". Press the Vol down key then the Vol up key. Do that again. Your device is unlocked now! Hooray!
Now you need to install a recovery.img. (I just did this too.) Get the .img file here: http://forum.xda-developers.com/showthread.php?t=1074979
Boot into fastboot again. Put the recovery img file you downloaded into the same directory as your adb and fastboot executables (if you haven't already linked to them in your PATH). Type "fastboot flash recovery recovery-lotsofstuffhere.img". Type "fastboot reboot". 2 seconds after the Motorola logo pops up press the Vol Down key. Then press the Vol Up key to enter recovery.
Ok, here's where I found out what a dumbass I was. I got all of the stupid "can't mount anything" errors again. I thought, HOLY ****. I just did all of that work, spent hours troubleshooting and reformatting and bringing it back to stock and flashing the custom recovery all over again just to run into the SAME error. I really thought I was screwed. Then I found some forum where a guy was complaining about the same error. He realized he was getting it because his sd card was half-way out. I thought - "SD CARD?!?" Some guys told me I needed one earlier too, but the ROMManager CWM didn't require it. It just screwed up my system files. So I popped one in and rebooted. Voila. Everything's kosher. If YOU have the same problem, make sure you've got an SD card in.
Ok, so now you're in recovery. You'll need to flash an OS of course. If you haven't already got it, get Tiamat 1.1 rom. Put it on the sd card. Wipe data/factory reset. Install zip from sd card. You're golden. At least I was. 5 hours later.
-Mike
Hey Mike I'm gonna give this a go. Just when i downloaded the img file to flash through fastboot i got an error saying battery was too lower to perform the recovery....damn it! The xoom isn't able to charge at the moment so i have to wait until it dies i guess (or i hope at least) and then charge it up and try again later.
Thanks again dude, hope i sort this out too. I'll download tiamat 1.1 in the meantime.
DUDE YOU'RE MY ****ING HERO!!!! I got it running can't say if everything is 100% just yet but the fac tthat im back in is enough to thank you so very much Mike!!! What a guy!
It worked? Great that's excellent news. Just out of curiosity - did you get there because you had ROMManager's ClockWorkMod? Or maybe you didn't do a full wipe before flashing a new rom? Or maybe you restored some WiFi settings with Titanium Backup after a new flash? How did you wind up with tthe problem in the first place - you know, for posterity.
well to be honest i am not 100% sure. I think the source of the problem msut have come from my previous installation of tiamat's 1.4.4 rom, it was always actin up on me and i don't believe i wiped the mod before i updated it and that may have done it. I wish i could give you more than just a pseudo answer.
DeeJayCruiser said:
Hey Mike I'm gonna give this a go. Just when i downloaded the img file to flash through fastboot i got an error saying battery was too lower to perform the recovery....damn it! The xoom isn't able to charge at the moment so i have to wait until it dies i guess (or i hope at least) and then charge it up and try again later.
Thanks again dude, hope i sort this out too. I'll download tiamat 1.1 in the meantime.
Click to expand...
Click to collapse
This is why they say to make sure you're plugged in when doing this important stuff, lol.
okantomi said:
This is why they say to make sure you're plugged in when doing this important stuff, lol.
Click to expand...
Click to collapse
Normally, I'd agree but in this rare case, he actually needed it to fully drain because he couldn't get it to power off using any normal method. Weird! so, it seems his only shot was to let it die to finally kill the screen and then start over. Very odd...
From original post
DeeJayCruiser said:
Everytime i manually reboot with power and volume up it automatically reboots the device instead of shutting it down, it literally won't shut down and keeps hanging at the moto logo.
Click to expand...
Click to collapse
farmsatguy said:
Normally, I'd agree but in this rare case, he actually needed it to fully drain because he couldn't get it to power off using any normal method. Weird! so, it seems his only shot was to let it die to finally kill the screen and then start over. Very odd...
From original post
Click to expand...
Click to collapse
You are right...I had forgotten that from the OP. Very strange indeed.
Yeah I dunno why, my xoom was just acting up. It's fantastic now, albeit the wifi still has a couple kinks but android market issues have been resolved, i get much better streams and with tiamat 1.1 everything is already built in and with a quickboot option =)
Xda...where would i be without you!
farmsatguy said:
Normally, I'd agree but in this rare case, he actually needed it to fully drain because he couldn't get it to power off using any normal method. Weird! so, it seems his only shot was to let it die to finally kill the screen and then start over. Very odd...
From original post
Click to expand...
Click to collapse
You should be able to reboot the device using vol up + power, then holding vol down and vol up until it says "Cold booting Linux.....".
This should do the same as letting the battery drain, plugging it in and turning it on.
DeeJay - dunno if you've done this already, but if you haven't you should go back to the Tiamat 1.1 thread and find the Modpack. It fixes the Market update issue and gives you built-in screenshot capabilities and an option to reboot into recovery from the power off menu. It's in there - you just have to scroll down a bit before you find it.
Also - what issues are you having with WiFi?
Thanks for that important tidbit, solarnz. I'm going to file it away for future use.
OMG!!!! Dude you just saved my life! I thought my baby was out the window. I had the exact same problem as you did. I was trying everything from every thread that had anything to do with this problem. I just finished installing and it booted. WHEWWW!!!
Thank u thank u thank u!!
Glad it helped. I'm seeing all kinds of posts in here about the ROMManager CWM. Not good.
Sent from my Xoom using Tapatalk
Hey Guys,
So I have been all threw the forum over the past week plus trying to find a solutions and have tried the majority of the ones on the site. Here is what happend:
HOW I GOT HERE:
I was running a CM10 nightly build from 01/15/2013 that was installed via CWM. I had been running it for about a week. When I went to bed I set my phone on the nightstand. About 2 hours into sleep the phone rebooted as I eventually woke up and noticed it thinking it was just the phone wonking out. When I up fully 6 hours later the phone was still rebooting. Since then when ever I cut on the phone it will no get passed the Google logo with the padlock. I can boot into fastboot and recovery. I am running the latest CWM 6.0.2.5.
PHONE VITALS QUICK GLANCE
Android ROM version: CM10 01/15/2013 Nightly Build
Baseband: D720SPRLC1
Bootloader: D720SPRKC5
Recovery: CWM v6.0.2.5
WHAT I HAVE TRIED
Restoring from backup
My first fix was to flash three different roms via recovery (doing full wipes each time)
Then I tried flashing a new recovery
Formatting /system, /cache, /data, and /boot and then flashing a new rom
Then I focused on trying to get the USB storage to mount so I tried using adb shell to repair the file system and that worked
Then I tried new roms and things got REALLY weird. When I would place a rom on “sdcard” it would be available to flash. When I flashed it though it would not take and upon returning to recovery it wouldn’t be there or when I mounted the storage again. After about 10 times of this I figured let me make sure I am not crazy and try the following.
Format the internal storage. In windows when I tried this windows would show that the device formatted and was empty one I dismounted after putting items on it and go back to storage by both remounting it or by recovery the old data would come right back. In Ubuntu when I tried formatting it both via disc recovery and gparted they both said the device was empty but that they were unable to create a partition.
So then I went down the path of all of the debricking tools out there including the one from AdamOutler's (I think it is called ressurector), ODIN, and the Nexus Root Tool all with varying results.
Ressurector kept saying injection failed
ODIN just does not work on the nexus s from what I can tell (spent a day researching and no one seems to give a definitive answer on this one)
And Nexus Root Tool attempts to flash back to stock but runs into an error with the baseband.
So next I decided to try and flash back to stock using the Google images. Using Ubuntu I ran the flash-all.sh that comes in the zip and kept running into the baseband issue.
So next I found OldBlue910’s post with all the OTA updates and I went after trying to use that to fix my phone. Thanks to the amount of instruction he gives I got a lot further and got the flash-all.sh in his stock zip to give me a better error message telling me which baseband I needed to have to go back to stock which when I double checked he includes in the zip. The problem is when I try to flash that radio fastboot tells me I was successful but the bootloader still reads as D720SPRLC1 and does not change regardless of what I do. When I try flashing the stock images again after flashing the radio I receive the same errors.
So now I think I have hit the real brick wall and unless someone has any advice I will need to go and buy a new phone. Hoping you guys can help. I figured if you guys can figure out a hard brick then this is still doable, I have just exhausted my own realm of knowledge.
Please and thank you’s to anyone with advice.
Could you get any lights ON? The buttons or the screen?
lights are on
Yes during the boot loop the Google logo comes up, then the screen goes black, then the Google logo comes back, and finally in about 20 seconds the lights come on. Once that happens after about 4 minutes the process starts all over again.